AIM:To compare the regularity and accuracy of laser in situ keratomileusis(LASIK) flaps created by the Ziemer FEMTO LDV 'Classic'(Ziemer 'Classic') and Ziemer FEMTO LDV Crystal Line femtosecond laser(Z...AIM:To compare the regularity and accuracy of laser in situ keratomileusis(LASIK) flaps created by the Ziemer FEMTO LDV 'Classic'(Ziemer 'Classic') and Ziemer FEMTO LDV Crystal Line femtosecond laser(Ziemer Crystal Line). METHODS:Fourier-domain optical coherence tomography(RTVue OCT) was used to measure the morphology of 200 LASIK flaps of 100 consecutive patients created with the Ziemer Classic(100 flaps) or the Ziemer Crystal Line(100 flaps) at one week postoperatively.Flap thickness was evaluated at 36 specified measurement points on each flap.For all procedures with both lasers,the nominal flap thickness was 110μm.RESULTS:The mean flap thickness of the Ziemer Crystal Line group(102.49±2.68μm) was thinner than that of the Ziemer Classic group(107.65±5.09μm)(P【0.01).Average thickness of all flaps was uniform within 4μm at all measurement points.The flaps in the Ziemer Crystal Line group were more regular than those in the Ziemer Classic group when measured from the center to the periphery.The maximum deviation from the nominal 110μm of 36 measurements was 8μm in the Ziemer Classic group,while in the Ziemer Crystal Line group it was 9μm.Within the 3 600 measurements on the 100 eyes,differences greater than 20μm were observed 0.14% in the Ziemer Classic group,and 0.04% in the Ziemer Crystal Line group. CONCLUSION:The flaps created with the Ziemer FEMTO LDV Crystal Line femtosecond laser are more uniform and thinner than those created by the Ziemer FEMTO LDV Classic femtosecond laser.展开更多
AIM: To assess and compare the flap morphology using anterior segment optical coherence tomography (AS-OCT) in laser in situ keratomileusis (LASIK) with Femto LDV femtosecond lasers versus Hansatome mechanical Microke...AIM: To assess and compare the flap morphology using anterior segment optical coherence tomography (AS-OCT) in laser in situ keratomileusis (LASIK) with Femto LDV femtosecond lasers versus Hansatome mechanical Microkeratome. METHODS: AS-OCT (Visante) was used to compare 1 month postoperatively the morphology of the flaps created with Femto LDV femtosecond lasers or Hansatome Microkeratome. The intendedfiap thickness was 110 mu m and 160 mu m respectively. The thickness of twenty-five points across each flap, which were 0mm, 1.5mm, 2.5mm, and 3.5mm to the corneal vertex on the horizontal, vertical, 45 degrees and 135 degrees meridian respectively, was evaluated. RESULTS: One month postoperative, the central flap thickness in the Femto LDV group was 107.43 +/- 4.70 mu m, while 125.90 +/- 17.50 mu m in the Hansatome group. The difference between the actual and the expectedfiap thickness was 5.61 +/- 3.84 mu m and 31.52 +/- 12.27 mu m, respectively. The Hansatome group had presented a statistically significant result (P<0.001). Flap morphology showed a more regular planar shape in the Femto LDV group and a meniscus shape in the Hansatome group. CONCLUSION: AS-OCT is a direct and fast procedure to assess the flap morphology. The morphology by AS-OCT showed that the flaps created with Femto LDV femtosecond laser were more accurate and regular than the flaps created with Hansatome microkeratome.展开更多
· AIM: To compare refractive results, higher-order aberrations(HOAs), contrast sensitivity and dry eye after laser in situ keratomileusis(LASIK) performed with a femtosecond laser versus a mechanical microkeratom...· AIM: To compare refractive results, higher-order aberrations(HOAs), contrast sensitivity and dry eye after laser in situ keratomileusis(LASIK) performed with a femtosecond laser versus a mechanical microkeratome for myopia and astigmatism.·METHODS: In this prospective, non-randomized study,120 eyes with myopia received a LASIK surgery with the Visu Max femtosecond laser for flap cutting, and 120 eyes received a conventional LASIK surgery with a mechanical microkeratome. Flap thickness, visual acuity, manifest refraction, contrast sensitivity function(CSF) curves,HOAs and dry-eye were measured at 1wk; 1, 3, 6mo after surgery.·RESULTS: At 6mo postoperatively, the mean central flap thickness in femtosecond laser procedure was113.05 ±5.89 μm(attempted thickness 110 μm), and148.36 ±21.24 μm(attempted thickness 140 μm) in mechanical microkeratome procedure. An uncorrected distance visual acuity(UDVA) of 4.9 or better was obtained in more than 98% of eyes treated by both methods, a gain in log MAR lines of corrected distance visual acuity(CDVA) occurred in more than 70% of eyes treated by both methods, and no eye lost ≥1 lines of CDVA in both groups. The difference of the mean UDVA and CDVA between two groups at any time post-surgery were not statistically significant(P 】0.05). The postoperative changes of spherical equivalent occurred markedly during the first month in both groups. The total root mean square values of HOAs and spherical aberrations in the femtosecond treated eyes were markedly less than those in the microkeratome treated eyes during 6mo visit after surgery(P 【0.01). The CSF values of the femtosecond treated eyes were also higherthan those of the microkeratome treated eyes at all space frequency(P 【0.01). The mean ocular surface disease index scores in both groups were increased at 1wk, and recovered to preoperative level at 1mo after surgery. The mean tear breakup time(TBUT) of the femtosecond treated eyes were markedly longer than those of the microkeratome treated eyes at postoperative 1, 3mo(P 【0.01).·CONCLUSION: Both the femtosecond laser and the mechanical microkeratome for LASIK flap cutting are safe and effective to correct myopia, with no statistically significant difference in the UDVA, CDVA during 6mo follow-up. Refractive results remained stable after 1mo post-operation for both groups. The femtosecond laser may have advantages over the microkeratome in the flap thickness predictability, fewer induced HOAs, better CSF,and longer TBUT.展开更多
AIMTo evaluate differences in flap thickness resulting from use of an Alcon Wavelight FS200 femtosecond laser and a MORIA SBK microkeratome when making a 110-µm-thick corneal flap and to identify the poten...AIMTo evaluate differences in flap thickness resulting from use of an Alcon Wavelight FS200 femtosecond laser and a MORIA SBK microkeratome when making a 110-µm-thick corneal flap and to identify the potential factors that affect corneal flap thickness.展开更多
AIM：To assess and compare the morphology of corneal flaps created by the Wavelight FS200 and Intralase FS60 femtosecond lasers in laser in situ keratomileusis（LASIK）.METHODS：Four hundred eyes of 200 patients were ...AIM：To assess and compare the morphology of corneal flaps created by the Wavelight FS200 and Intralase FS60 femtosecond lasers in laser in situ keratomileusis（LASIK）.METHODS：Four hundred eyes of 200 patients were enrolled in this study and divided into Wavelight FS200 groups（200 eyes） and Intralase FS60 groups（200 eyes）.Fourier-domain optical coherence tomography（RTVue OCT） was used to measure the corneal flap thickness of 36 specified measurements on each flap one week after surgery.Results were used to analyze the regularity,uniformity and accuracy of the two types of LASIK flaps.RESULTS：The mean thickness of corneal flap and central flap was 105.71±4.72 μm and 105.39±4.50 μm in Wavelight FS200 group and 109.78±11.42 μm and 109.15±11.59 μm in Intralase FS60 group,respectively.The flaps made with the Wavelight FS200 femtosecond laser were thinner than those created by the Intralase FS60 femtosecond laser（P=0.000）.Corneal flaps in the 2 groups were uniform and regular,showing an almost planar configuration.But the Wavelight FS200 group has more predictability and uniformity of flap creation.The mean deviation between achieved and attempted flap thickness was smaller in the Wavelight FS200 group than that in the Intralase FS60 group,which were 5.18±3.71 μm and 8.68±7.42 μm respectively.The deviation of more than 20 μm was 0.2% measurements in Wavelight FS200 group and 8.29% measurements in Intralase FS60 group.CONCLUSION：The morphologies of flaps created by Wavelight FS200 are more uniform and thinner than those created by Intralase FS60.展开更多
AIM:To study the effects of different flap sizes on visual acuity,refractive outcomes,and aberrations after femtosecond laser for laser in situ keratomileusis(LASIK).METHODS:In each of the forty patients enrolled,1 ey...AIM:To study the effects of different flap sizes on visual acuity,refractive outcomes,and aberrations after femtosecond laser for laser in situ keratomileusis(LASIK).METHODS:In each of the forty patients enrolled,1 eye was randomly assigned to receive treatment with a 8.1mm diameter corneal flap,defined as the small flap,while the other eye was treated with a 8.6mm diameter corneal flap,defined as the big flap.Refractive errors,visual acuity,and higher-order aberrations were compared between the two groups at week 1,month 1 and 3 postoperatively. RESULTS:The postoperative refractive errors and visual acuity all conformed to the intended goal.Postoperative higher-order aberrations were increased,especially in spherical aberration(Z12) and vertical coma(Z7).There were no statistically significant differences between the two groups in terms of postoperative refractive errors,visual acuity,root mean square of total HOAs(HO-RMS),trefoil 30°(Z6),vertical coma(Z7),horizontal coma(Z8),trefoil 0°(Z9),and spherical aberration(Z12) at any point during the postoperative follow-up.CONCLUSION:Both the small and big flaps are safe and effective procedures to correct myopia,provided the exposure stroma meets the excimer laser ablations.The personalized size corneal flap is feasible,as we can design the size of corneal flap based on the principle that the corneal flap diameter should be equal to or greater than the sum of the maximum ablation diameter and apparatus error.展开更多
Background Thin-flap laser in situ keratomileusis （LASIK） is the new trend of refractive error correction surgery, the formation of corneal flap is crucial for a success of LASIK surgery. This study aimed to assess ...Background Thin-flap laser in situ keratomileusis （LASIK） is the new trend of refractive error correction surgery, the formation of corneal flap is crucial for a success of LASIK surgery. This study aimed to assess and compare the variations of LASIK flap created by the IntraLase femtosecond laser, Moria One Use-Plus SBK and Moria M2 Single-Use 90 pm- head microkeratome using Anterior segment optical coherence tomography （Visante OCT）. Methods One hundred and sixty-one eyes of 81 consecutive patients were enrolled in this prospective study and randomly divided into three groups depending on the flap creation method： flap creation with the the IntraLase femtosecond laser （IntraLase group, 59 eyes）, flap creation with the Moria One Use-Plus SBK （SBK group, 44 eyes）, and flap creation with the Moria M2 Single-Use 90 pm-head microkeratome （M2SU90 group, 58 eyes）. The nominal flap thickness was 110 m for all patients and for the three devices. One month after surgery, Visante OCT was used to measure the flap thickness at 20 locations on each cornea and the results were assessed for uniformity, regularity, and accuracy. Results At 1 month after surgery, the mean central flap thickness was （111±3） pm in the IntraLase group, （114±8） pm in the SBK group, and （118±13） pm in the M2SU90 group respectively. The flaps in the IntraLase group and the SBK group were more regular, showing an almost planar configuration, than the meniscus-shaped flaps in the M2SU90 group. The maximum deviation from the intended flap thickness （110 pm） was 6 pm in the IntraLase group, 10 pm in the SBK group, and 20 pm in the M2SU90 group respectively. A difference greater than 20 pm was observed in 0.42% of measurements in the IntraLase group; 2.95% of the measurements in the SBK group and 21.12% of measurements in the M2SU90 group. Conclusions The flaps created by the IntraLase femtosecond laser and Moria One Use-Plus SBK are more uniform; more regular, and more accurate than those created by the Moria M2 Single-Use 90 pm-head microkeratome. The first two methods can make precise flaps for Sub-Bowman Keratomileusis.展开更多
目的:评价VisuMax飞秒激光与Moria One Use-Plus SBK角膜板层刀制作超薄角膜瓣的舒适性与安全性。方法:回顾性病例系列研究。统计同期接受角膜屈光手术的778例1556眼(VisuMax飞秒激光组即A组384例768眼,SBK角膜板层刀组即B组394例788眼)...目的:评价VisuMax飞秒激光与Moria One Use-Plus SBK角膜板层刀制作超薄角膜瓣的舒适性与安全性。方法:回顾性病例系列研究。统计同期接受角膜屈光手术的778例1556眼(VisuMax飞秒激光组即A组384例768眼,SBK角膜板层刀组即B组394例788眼),对比术中舒适度评分、角膜瓣相关并发症、角膜瓣切口出血、球结膜下出血的发生率,评价两种方法的舒适性与安全性。结果:术中舒适度方面,感觉极不舒适,难以忍受者A组5例(1.3%),B组28例(7.1%);术中角膜瓣切口出血A组4眼(0.5%),B组74眼(9.4%);球结膜下出血A组18眼(2.3%),B组82眼(10.4%);角膜瓣边缘不齐A组0眼(0),B组94(11.9%);A组有4眼(0.5%)出现角膜瓣上皮部分剥脱,但未影响成功掀瓣及手术,A组有53眼(6.9%)发生角膜层间气泡(OBL)。两组无其它相关并发症。结论:两种方法安全可靠,均无严重影响术后视觉质量的角膜瓣相关并发症。展开更多
文摘AIM:To compare the regularity and accuracy of laser in situ keratomileusis(LASIK) flaps created by the Ziemer FEMTO LDV 'Classic'(Ziemer 'Classic') and Ziemer FEMTO LDV Crystal Line femtosecond laser(Ziemer Crystal Line). METHODS:Fourier-domain optical coherence tomography(RTVue OCT) was used to measure the morphology of 200 LASIK flaps of 100 consecutive patients created with the Ziemer Classic(100 flaps) or the Ziemer Crystal Line(100 flaps) at one week postoperatively.Flap thickness was evaluated at 36 specified measurement points on each flap.For all procedures with both lasers,the nominal flap thickness was 110μm.RESULTS:The mean flap thickness of the Ziemer Crystal Line group(102.49±2.68μm) was thinner than that of the Ziemer Classic group(107.65±5.09μm)(P【0.01).Average thickness of all flaps was uniform within 4μm at all measurement points.The flaps in the Ziemer Crystal Line group were more regular than those in the Ziemer Classic group when measured from the center to the periphery.The maximum deviation from the nominal 110μm of 36 measurements was 8μm in the Ziemer Classic group,while in the Ziemer Crystal Line group it was 9μm.Within the 3 600 measurements on the 100 eyes,differences greater than 20μm were observed 0.14% in the Ziemer Classic group,and 0.04% in the Ziemer Crystal Line group. CONCLUSION:The flaps created with the Ziemer FEMTO LDV Crystal Line femtosecond laser are more uniform and thinner than those created by the Ziemer FEMTO LDV Classic femtosecond laser.
基金Supported by National Natural Science Foundation of China (No.81070754)
文摘AIM: To assess and compare the flap morphology using anterior segment optical coherence tomography (AS-OCT) in laser in situ keratomileusis (LASIK) with Femto LDV femtosecond lasers versus Hansatome mechanical Microkeratome. METHODS: AS-OCT (Visante) was used to compare 1 month postoperatively the morphology of the flaps created with Femto LDV femtosecond lasers or Hansatome Microkeratome. The intendedfiap thickness was 110 mu m and 160 mu m respectively. The thickness of twenty-five points across each flap, which were 0mm, 1.5mm, 2.5mm, and 3.5mm to the corneal vertex on the horizontal, vertical, 45 degrees and 135 degrees meridian respectively, was evaluated. RESULTS: One month postoperative, the central flap thickness in the Femto LDV group was 107.43 +/- 4.70 mu m, while 125.90 +/- 17.50 mu m in the Hansatome group. The difference between the actual and the expectedfiap thickness was 5.61 +/- 3.84 mu m and 31.52 +/- 12.27 mu m, respectively. The Hansatome group had presented a statistically significant result (P<0.001). Flap morphology showed a more regular planar shape in the Femto LDV group and a meniscus shape in the Hansatome group. CONCLUSION: AS-OCT is a direct and fast procedure to assess the flap morphology. The morphology by AS-OCT showed that the flaps created with Femto LDV femtosecond laser were more accurate and regular than the flaps created with Hansatome microkeratome.
文摘· AIM: To compare refractive results, higher-order aberrations(HOAs), contrast sensitivity and dry eye after laser in situ keratomileusis(LASIK) performed with a femtosecond laser versus a mechanical microkeratome for myopia and astigmatism.·METHODS: In this prospective, non-randomized study,120 eyes with myopia received a LASIK surgery with the Visu Max femtosecond laser for flap cutting, and 120 eyes received a conventional LASIK surgery with a mechanical microkeratome. Flap thickness, visual acuity, manifest refraction, contrast sensitivity function(CSF) curves,HOAs and dry-eye were measured at 1wk; 1, 3, 6mo after surgery.·RESULTS: At 6mo postoperatively, the mean central flap thickness in femtosecond laser procedure was113.05 ±5.89 μm(attempted thickness 110 μm), and148.36 ±21.24 μm(attempted thickness 140 μm) in mechanical microkeratome procedure. An uncorrected distance visual acuity(UDVA) of 4.9 or better was obtained in more than 98% of eyes treated by both methods, a gain in log MAR lines of corrected distance visual acuity(CDVA) occurred in more than 70% of eyes treated by both methods, and no eye lost ≥1 lines of CDVA in both groups. The difference of the mean UDVA and CDVA between two groups at any time post-surgery were not statistically significant(P 】0.05). The postoperative changes of spherical equivalent occurred markedly during the first month in both groups. The total root mean square values of HOAs and spherical aberrations in the femtosecond treated eyes were markedly less than those in the microkeratome treated eyes during 6mo visit after surgery(P 【0.01). The CSF values of the femtosecond treated eyes were also higherthan those of the microkeratome treated eyes at all space frequency(P 【0.01). The mean ocular surface disease index scores in both groups were increased at 1wk, and recovered to preoperative level at 1mo after surgery. The mean tear breakup time(TBUT) of the femtosecond treated eyes were markedly longer than those of the microkeratome treated eyes at postoperative 1, 3mo(P 【0.01).·CONCLUSION: Both the femtosecond laser and the mechanical microkeratome for LASIK flap cutting are safe and effective to correct myopia, with no statistically significant difference in the UDVA, CDVA during 6mo follow-up. Refractive results remained stable after 1mo post-operation for both groups. The femtosecond laser may have advantages over the microkeratome in the flap thickness predictability, fewer induced HOAs, better CSF,and longer TBUT.
文摘AIMTo evaluate differences in flap thickness resulting from use of an Alcon Wavelight FS200 femtosecond laser and a MORIA SBK microkeratome when making a 110-µm-thick corneal flap and to identify the potential factors that affect corneal flap thickness.
文摘AIM：To assess and compare the morphology of corneal flaps created by the Wavelight FS200 and Intralase FS60 femtosecond lasers in laser in situ keratomileusis（LASIK）.METHODS：Four hundred eyes of 200 patients were enrolled in this study and divided into Wavelight FS200 groups（200 eyes） and Intralase FS60 groups（200 eyes）.Fourier-domain optical coherence tomography（RTVue OCT） was used to measure the corneal flap thickness of 36 specified measurements on each flap one week after surgery.Results were used to analyze the regularity,uniformity and accuracy of the two types of LASIK flaps.RESULTS：The mean thickness of corneal flap and central flap was 105.71±4.72 μm and 105.39±4.50 μm in Wavelight FS200 group and 109.78±11.42 μm and 109.15±11.59 μm in Intralase FS60 group,respectively.The flaps made with the Wavelight FS200 femtosecond laser were thinner than those created by the Intralase FS60 femtosecond laser（P=0.000）.Corneal flaps in the 2 groups were uniform and regular,showing an almost planar configuration.But the Wavelight FS200 group has more predictability and uniformity of flap creation.The mean deviation between achieved and attempted flap thickness was smaller in the Wavelight FS200 group than that in the Intralase FS60 group,which were 5.18±3.71 μm and 8.68±7.42 μm respectively.The deviation of more than 20 μm was 0.2% measurements in Wavelight FS200 group and 8.29% measurements in Intralase FS60 group.CONCLUSION：The morphologies of flaps created by Wavelight FS200 are more uniform and thinner than those created by Intralase FS60.
文摘AIM:To study the effects of different flap sizes on visual acuity,refractive outcomes,and aberrations after femtosecond laser for laser in situ keratomileusis(LASIK).METHODS:In each of the forty patients enrolled,1 eye was randomly assigned to receive treatment with a 8.1mm diameter corneal flap,defined as the small flap,while the other eye was treated with a 8.6mm diameter corneal flap,defined as the big flap.Refractive errors,visual acuity,and higher-order aberrations were compared between the two groups at week 1,month 1 and 3 postoperatively. RESULTS:The postoperative refractive errors and visual acuity all conformed to the intended goal.Postoperative higher-order aberrations were increased,especially in spherical aberration(Z12) and vertical coma(Z7).There were no statistically significant differences between the two groups in terms of postoperative refractive errors,visual acuity,root mean square of total HOAs(HO-RMS),trefoil 30°(Z6),vertical coma(Z7),horizontal coma(Z8),trefoil 0°(Z9),and spherical aberration(Z12) at any point during the postoperative follow-up.CONCLUSION:Both the small and big flaps are safe and effective procedures to correct myopia,provided the exposure stroma meets the excimer laser ablations.The personalized size corneal flap is feasible,as we can design the size of corneal flap based on the principle that the corneal flap diameter should be equal to or greater than the sum of the maximum ablation diameter and apparatus error.
文摘Background Thin-flap laser in situ keratomileusis （LASIK） is the new trend of refractive error correction surgery, the formation of corneal flap is crucial for a success of LASIK surgery. This study aimed to assess and compare the variations of LASIK flap created by the IntraLase femtosecond laser, Moria One Use-Plus SBK and Moria M2 Single-Use 90 pm- head microkeratome using Anterior segment optical coherence tomography （Visante OCT）. Methods One hundred and sixty-one eyes of 81 consecutive patients were enrolled in this prospective study and randomly divided into three groups depending on the flap creation method： flap creation with the the IntraLase femtosecond laser （IntraLase group, 59 eyes）, flap creation with the Moria One Use-Plus SBK （SBK group, 44 eyes）, and flap creation with the Moria M2 Single-Use 90 pm-head microkeratome （M2SU90 group, 58 eyes）. The nominal flap thickness was 110 m for all patients and for the three devices. One month after surgery, Visante OCT was used to measure the flap thickness at 20 locations on each cornea and the results were assessed for uniformity, regularity, and accuracy. Results At 1 month after surgery, the mean central flap thickness was （111±3） pm in the IntraLase group, （114±8） pm in the SBK group, and （118±13） pm in the M2SU90 group respectively. The flaps in the IntraLase group and the SBK group were more regular, showing an almost planar configuration, than the meniscus-shaped flaps in the M2SU90 group. The maximum deviation from the intended flap thickness （110 pm） was 6 pm in the IntraLase group, 10 pm in the SBK group, and 20 pm in the M2SU90 group respectively. A difference greater than 20 pm was observed in 0.42% of measurements in the IntraLase group; 2.95% of the measurements in the SBK group and 21.12% of measurements in the M2SU90 group. Conclusions The flaps created by the IntraLase femtosecond laser and Moria One Use-Plus SBK are more uniform; more regular, and more accurate than those created by the Moria M2 Single-Use 90 pm-head microkeratome. The first two methods can make precise flaps for Sub-Bowman Keratomileusis.
文摘目的:评价VisuMax飞秒激光与Moria One Use-Plus SBK角膜板层刀制作超薄角膜瓣的舒适性与安全性。方法:回顾性病例系列研究。统计同期接受角膜屈光手术的778例1556眼(VisuMax飞秒激光组即A组384例768眼,SBK角膜板层刀组即B组394例788眼),对比术中舒适度评分、角膜瓣相关并发症、角膜瓣切口出血、球结膜下出血的发生率,评价两种方法的舒适性与安全性。结果:术中舒适度方面,感觉极不舒适,难以忍受者A组5例(1.3%),B组28例(7.1%);术中角膜瓣切口出血A组4眼(0.5%),B组74眼(9.4%);球结膜下出血A组18眼(2.3%),B组82眼(10.4%);角膜瓣边缘不齐A组0眼(0),B组94(11.9%);A组有4眼(0.5%)出现角膜瓣上皮部分剥脱,但未影响成功掀瓣及手术,A组有53眼(6.9%)发生角膜层间气泡(OBL)。两组无其它相关并发症。结论:两种方法安全可靠,均无严重影响术后视觉质量的角膜瓣相关并发症。
