Fluorescence sensors based on a trifluoroacetophone compound doped in ethyl cellulose (EC) thin films have been developed for the detection of methanol, ethanol, and 2-propanol (isopropanol, PriOH) vapors. Thin-film s...Fluorescence sensors based on a trifluoroacetophone compound doped in ethyl cellulose (EC) thin films have been developed for the detection of methanol, ethanol, and 2-propanol (isopropanol, PriOH) vapors. Thin-film sensors are prepared with 4-dibutylamino-4’-(trifluoroacetyl)stilbene (Chromoionophore IX or CIX) as the fluorescent dye and its solution in EC was spin-coated onto glass slides. The luminescence intensity of the dye (555 nm) is quenched when exposed to alcohol vapor. Tested in the range of ca. 0 - 1.5?× 104 ppm (wt) for MeOH and EtOH, and ca. 0 - 2.3 × 104 ppm for PriOH, the sensors gave detection limits of 9, 13, 21 ppm and quantification limits of 32, 43, and 70 ppm, respectively. To enhance the sensitivity of the sensors, TiO2 particles have been added to the films to induce Mie scattering, which increases the incident light interaction with the sensing films. The sensors in this work have been designed to work in a multianalyte platform for the simultaneous detection of multiple gas analytes.展开更多
Abstract--Poly4-vinylphenol （P4VP）/multi-wan carbon nanotubes （MWNTs） multi-layer sensitive films were deposited on interdigitated electrodes by airbrush technology to detect toluene vapor at room temperature. The...Abstract--Poly4-vinylphenol （P4VP）/multi-wan carbon nanotubes （MWNTs） multi-layer sensitive films were deposited on interdigitated electrodes by airbrush technology to detect toluene vapor at room temperature. The surface and section morphologies of the multi-layer films were observed by a scanning electron microscope （SEM）. It is found that the resistance of the sensor increases when it is exposed to toluene vapor and the response has a good linearity with the concentration of toluene. The results show that the P4VP/MWNTs three-layer film sensors have better sensing properties compared with the two-layer film sensors. The related sensing mechanism is studied in detail.展开更多
Composite structures are sensitive to impact damage in practical engineering.Electric resistance change method(ERCM)is an ideal technique for damage monitoring of composite structures.Due to the anisotropy of fiber-re...Composite structures are sensitive to impact damage in practical engineering.Electric resistance change method(ERCM)is an ideal technique for damage monitoring of composite structures.Due to the anisotropy of fiber-resin matrix composites,impact location monitoring is difficult,and research on impact location of fiber composite laminates(FRPs)is limited.A preparation method of MXene/CNT/CuNps thin film sensor is proposed.According to the modeling simulation and theoretical calculation,the resistance change characteristics of the thin film sensor are obtained,the relationship between the impact distance and the resistance change is established,and the sensor array is designed.A three-point localization algorithm and a weight function compensation localization algorithm are proposed,which can improve the imaging accuracy of the impact position.The impact point location was observed and analyzed using ultrasonic C-scan technology.The results show that the weight function compensation positioning algorithm can accurately locate the impact of the composite structure,and the error in the X direction is 7.1%,the error in the Y direction is 0.03%,which verifies the effectiveness of the method.展开更多
Foodborne Listeria monocytogenes poses serious threats to public health.Fast and sensitive detection of the pathogen at the point of contamination is thus crucial to halt the spread of bacteria-related diseases.Herein...Foodborne Listeria monocytogenes poses serious threats to public health.Fast and sensitive detection of the pathogen at the point of contamination is thus crucial to halt the spread of bacteria-related diseases.Herein,we report for the first time a fluorescent film sensor to detect the biomarker of L.monocytogenes,3-hydroxy-2-butanone.The sensor demonstrated unprecedented sensing performance for the analyte with a detection limit lower than 0.05 mg/m^(3),response time less than 1 s,full reversibility,and excellent selectivity.Further study showed that the sensor can be used to monitor the growth of L.monocytogenes with much-improved sensitivity.The superior performance of the sensor is ascribed to the specific binding,efficient charge transfer emission,and porous adlayer structure of the specially designed sensing fluorophore-based film.Our work paves the way to develop a portable detector to meet the needs for on-site and real-time detection of foodborne pathogens.展开更多
The study of liquid film characteristics in multiphase flow is a very important research topic, however,the characteristics of the liquid film around Taylor bubble structure in gas, oil and water three-phase flow are ...The study of liquid film characteristics in multiphase flow is a very important research topic, however,the characteristics of the liquid film around Taylor bubble structure in gas, oil and water three-phase flow are not clear. In the present study, a novel liquid film sensor is applied to measure the distributed signals of the liquid film in three-phase flow. Based on the liquid film signals, the liquid film characteristics including the structural characteristics and the nonlinear dynamics characteristics in three-phase flows are investigated for the first time. The structural characteristics including the proportion, the appearance frequency and the thickness of the liquid film are obtained and the influences of the liquid and gas superficial velocities and the oil content on them are investigated. To investigate the nonlinear dynamics characteristics of the liquid film with the changing flow conditions, the entropy analysis is introduced to successfully uncover and quantify the dynamic complexity of the liquid film behavior.展开更多
In high-speed cutting, natural thermocouple, artificial thermocouple and infrared radiation temperature measurement are usually adopted for measuring cutting temperature, but these methods have difficulty in measuring...In high-speed cutting, natural thermocouple, artificial thermocouple and infrared radiation temperature measurement are usually adopted for measuring cutting temperature, but these methods have difficulty in measuring transient temperature accurately of cutting area on account of low response speed and limited cutting condition. In this paper, NiCr/NiSi thin-film thermocouples（TFTCs） are fabricated according to temperature characteristic of cutting area in high-speed cutting by means of advanced twinned microwave electro cyclotron resonance（MW-ECR） plasma source enhanced radio frequency（RF） reaction non-balance magnetron sputtering technique, and can be used for transient cutting temperature measurement. The time constants of the TFTCs with different thermo-junction film width are measured at four kinds of sampling frequency by using Ultra-CFR short pulsed laser system that established. One-dimensional unsteady heat conduction model is constructed and the dynamic performance is analyzed theoretically. It can be seen from the analysis results that the NiCr/NiSi TFTCs are suitable for measuring transient temperature which varies quickly, the response speed of TFTCs can be obviously improved by reducing the thickness of thin-film, and the area of thermo-junction has little influence on dynamic response time. The dynamic calibration experiments are made on the constructed dynamic calibration system, and the experimental results confirm that sampling frequency should be larger than 50 kHz in dynamic measurement for stable response time, and the shortest response time is 0.042 ms. Measurement methods and devices of cutting heat and cutting temperature measurement are developed and improved by this research, which provide practical methods and instruments in monitoring cutting heat and cutting temperature for research and production in high-speed machining.展开更多
The micro touch sensor which is designed to be used in the blood vessels isproposed. Using this touch sensor, the risk of injuring blood vessels can be reduced. A prototype ofmicro touch sensor using PZT (lead zircona...The micro touch sensor which is designed to be used in the blood vessels isproposed. Using this touch sensor, the risk of injuring blood vessels can be reduced. A prototype ofmicro touch sensor using PZT (lead zirconate titanate) thin film synthesized by hydrothermal methodis made. The basic properties of the micro touch sensor are studied. In order to analyse theproperties of the micro touch sensor, a mathematical model is set up.展开更多
In this study, a low-cost and sensitive voltammetric method was developed for the determination of paraquat (PQ2+). This was achieved by coating a glassy carbon electrode with a purified fraction of a smectite-type cl...In this study, a low-cost and sensitive voltammetric method was developed for the determination of paraquat (PQ2+). This was achieved by coating a glassy carbon electrode with a purified fraction of a smectite-type clay, which was then used to accumulate paraquat by an ion exchange process. The electronanalytical procedure involves two steps: the chemical preconcentration of paraquat under open-circuit conditions in an aqueous medium, followed by the voltammetric detection of the preconcentrated pollutant in a medium containing permanganate ions which significantly improved through its catalytic action the electrode response. A systematic study of the experimental conditions (pH of the accumulation and detection media, permanganate concentration in the detection medium, clay content of the coating, potential and duration of the electrolysis step) on the stripping response were examined in detail. After optimization, a linear calibration curve for paraquat was obtained in the concentration range from 1.6 to 2.8 μM, leading to a detection limit of 3.8 × 10–9 mol·L–1 (S/N = 3). The proposed method was successfully applied to the determination of paraquat in spring water.展开更多
In the present study,anodic films on aluminium alloy was used as the dielectric layer for Cu thinfilm temperature sensor,and then Cu film was deposited by unbalanced magnetron sputtering ion plating as the sensitive l...In the present study,anodic films on aluminium alloy was used as the dielectric layer for Cu thinfilm temperature sensor,and then Cu film was deposited by unbalanced magnetron sputtering ion plating as the sensitive layer.Microstructure and surface morphologies of Cu film were investigated by optical microscope(OM),atomic force microscope(AFM) and scanning electron microscope(SEM).Electrical properties of Cu thin-film temperature sensor were tested by four-point probe technique and Digit Multimeter.The results showed that the surface roughness of anodic films can be reduced from Ra 58.096 nm to Ra 16.335 nm by proper polishing.Continual Cu stripes can be obtained both on polished anodic alumina film and smooth alumina wafer by etching after Cu film annealing.The resistivity of Cu films before and after 300 ℃ as well as 400 ℃ annealing are 12.48 mΩ·cm,5.48 mΩ·cm and 4.83 mΩ·cm,respectively.The resistances of Cu thin-film temperature sensor in 70 ℃ and 0 ℃ are 946.5 Ω and 761.15 Ω respectively.The temperature coefficient of resistivity(TCR) of the sensor is 3479 × 10^(- 6) /℃.展开更多
Developing surface-enhanced microcantilevers with improved sensitivities is of longstanding interest. In this paper, the design of surface-enhanced cantilever sensors using nano- （micro-） porous films as surface lay...Developing surface-enhanced microcantilevers with improved sensitivities is of longstanding interest. In this paper, the design of surface-enhanced cantilever sensors using nano- （micro-） porous films as surface layers is proposed. The static deformation and resonance frequencies of these surface-enhanced sensors with the simultaneous effects of the eigenstrain, the surface stress and the adsorption mass are analyzed. It is shown that the sensitivities of these novel cantilever sensors for the static deformation and resonance frequencies can be tuned by the porosity, the size of the pores and the structure of the porous films. For the three kinds of cantilever consisting of solid films, films with aligned cylindrical micro-scale pores, and those with nano-scale pores, the nano-porous one has the highest static and dynamic sensitivities, whereas the solid one has the lowest.展开更多
The Cl2-sensitive heteropolysiloxanes(HPS) film was formed on the interdigital capacitor based on silicon dioxide by means of sol-gel process and spin-on technique.Measurements of interdigital capacitance were perform...The Cl2-sensitive heteropolysiloxanes(HPS) film was formed on the interdigital capacitor based on silicon dioxide by means of sol-gel process and spin-on technique.Measurements of interdigital capacitance were performed at room temperature for frequencies 100 Hz,1 kHz and 10 kHz.It is shown that there is a linear relationship between the capacitance and the concentration of chlorine gas.Influences of the measurement frequency and film thickness of silicate on the sensitivity of the sensor to C12 gas were discussed.And organically modified N,N-diethylaminopropyl-trimethoxysilane (APMS) had a much higher sensitivity.展开更多
Present paper reports the synthesis of SnO2, its characterization and performance as Liquefied Petroleum Gas (LPG) Sensor. XRD pattern revealed the tetragonal crystalline nature of the material. Crystallites sizes wer...Present paper reports the synthesis of SnO2, its characterization and performance as Liquefied Petroleum Gas (LPG) Sensor. XRD pattern revealed the tetragonal crystalline nature of the material. Crystallites sizes were in the range 14 - 30 nm. Tin oxide thick film was prepared by using screen printing technique. After that these were investigated through SEM. SEM image of thick-film surface was spherical in shape and porous. Further at room temperature, the film was exposed to LPG in a controlled gas chamber and variations in resistance with the concentrations of LPG were observed. The maximum value of average sensitivity of thick film was 37 MΩ/min for 5 vol. % of LPG. Sensor responses as a function of exposure and response times were also estimated and maximum sensor response were found 273 and 312 for 4 and 5 vol. % of LPG respectively.展开更多
The formaldehyde （HCHO） detecting at room temperature is of great significance. Different ratios of P3HT/ZnO composite films （3：1, 1：1, and 1：3） were deposited on the organic thin film transistor （OTFT） by sp...The formaldehyde （HCHO） detecting at room temperature is of great significance. Different ratios of P3HT/ZnO composite films （3：1, 1：1, and 1：3） were deposited on the organic thin film transistor （OTFT） by spray-deposition technology, and the electrical properties and HCHO-sensing properties of all the prepared OTFT devices were measured by Keithley 4200-SCS source measurement unit. The results show that the OTFT sensor based on the P3HT/ZnO films with the ratio of 1：1 exhibited the best output and transfer curves. Different changing tendency were observed with the increase of ZnO proportion when exposed to HCHO at room temperature, and the device with the ratio of 1：1 behaved a good response and recovery characteristics.展开更多
A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobal...A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobalt-iron alloy electrode greatly improved the hydrogen-ion sensor response performance, i.e., the sensor worked stably for more than 7 weeks and showed a quick response time of several seconds. Among the cobalt and iron alloy systems tested, the electrodeposited Co58Fe42 thin-film electrode showed the best EMF response characteristics, i.e., the sensor exhibited a linear potentiometric response to hydrogen-phosphate ion at the concentration range between 1.0 × 10–5 and 1.0 × 10–2 M with the slope of –43 mV/decade at pH 5.0 and at 30℃. A sensing mechanism of the Co-based potentiometric hydrogen-phosphate ion sensor was proposed on the basis of results of instrumental analysis.展开更多
Hydrogen has been recently attracted much attention with respect to high energy-conversion efficiency and low environmental burden. However, hydrogen gas is dangerous due to an explosive gas and a fast combustion rate...Hydrogen has been recently attracted much attention with respect to high energy-conversion efficiency and low environmental burden. However, hydrogen gas is dangerous due to an explosive gas and a fast combustion rate. Therefore, the development of hydrogen sensor with high accuracy and reliability that can detect hydrogen easily is required. Especially, a flexible hydrogen sensor is useful because it has a high degree of freedom with respect to the shape of location in which the sensor is to be located. A flexible hydrogen sensor—namely, a WO3 thin film formed on a PET film by the sol-gel method using photo irradiation—based on gasochromism of WO3 was developed. By irradiating a thin film, which was prepared by using WO3 precursor solution synthesized by the sol-gel method, with ultraviolet rays, a high-purity WO3 film could be prepared on PET at low temperature. The sensor was structured as a polystyrene (PS) film containing palladium (Pd) laminated on a WO3 film. The WO3 layer was porous, so the PS containing Pd atoms solution penetrated the WO3 layer. WO3 reacted with hydrogen gas and instantly turned blue as the transmittance of the WO3 layer changed. The sensor showed high reactivity even for hydrogen concentration below 4% (1%, 0.5%, 0.25%, and 0.1%), which was the lower limit of hydrogen ignition, and a linear relationship between hydrogen concentration and change in transmittance was found. Moreover, the resistance of the WO3 film significantly and instantaneously changed due to hydrogen-gas exposure, and the hydrogen concentration and resistance change showed a linear relationship. It is therefore possible to quantitatively detect low concentrations of hydrogen by using changes in transmittance and resistance as indices. Since these changes occur selectively under hydrogen at room temperature and normal pressure, they form the basis of a highly sensitive hydrogen sensor. Since the developed sensor is flexible, it has a high degree of freedom with respect to the shape of location in which the sensor is to be展开更多
文摘Fluorescence sensors based on a trifluoroacetophone compound doped in ethyl cellulose (EC) thin films have been developed for the detection of methanol, ethanol, and 2-propanol (isopropanol, PriOH) vapors. Thin-film sensors are prepared with 4-dibutylamino-4’-(trifluoroacetyl)stilbene (Chromoionophore IX or CIX) as the fluorescent dye and its solution in EC was spin-coated onto glass slides. The luminescence intensity of the dye (555 nm) is quenched when exposed to alcohol vapor. Tested in the range of ca. 0 - 1.5?× 104 ppm (wt) for MeOH and EtOH, and ca. 0 - 2.3 × 104 ppm for PriOH, the sensors gave detection limits of 9, 13, 21 ppm and quantification limits of 32, 43, and 70 ppm, respectively. To enhance the sensitivity of the sensors, TiO2 particles have been added to the films to induce Mie scattering, which increases the incident light interaction with the sensing films. The sensors in this work have been designed to work in a multianalyte platform for the simultaneous detection of multiple gas analytes.
基金partially supported by the National Natural Foundation of China under Grant No.61176066 and No.61101031
文摘Abstract--Poly4-vinylphenol （P4VP）/multi-wan carbon nanotubes （MWNTs） multi-layer sensitive films were deposited on interdigitated electrodes by airbrush technology to detect toluene vapor at room temperature. The surface and section morphologies of the multi-layer films were observed by a scanning electron microscope （SEM）. It is found that the resistance of the sensor increases when it is exposed to toluene vapor and the response has a good linearity with the concentration of toluene. The results show that the P4VP/MWNTs three-layer film sensors have better sensing properties compared with the two-layer film sensors. The related sensing mechanism is studied in detail.
基金This work was financially supported by National Natural Science Foundation of China(11902204)Liaoning Revitalization Talents Program(XLYC2007118)+3 种基金Aeronautical Science Foundation(201903054001)Shenyang Youth Technological Innovation Talent Project(RC200030),Shenyang Natural Science Foundation Project(22-315-6-07)Education Department of Liaoning Province’s Item(LJKQZ 20222263)Basic Scientific Research Project of Liaoning Provincial Department of Education(LJKMZ20220566).
文摘Composite structures are sensitive to impact damage in practical engineering.Electric resistance change method(ERCM)is an ideal technique for damage monitoring of composite structures.Due to the anisotropy of fiber-resin matrix composites,impact location monitoring is difficult,and research on impact location of fiber composite laminates(FRPs)is limited.A preparation method of MXene/CNT/CuNps thin film sensor is proposed.According to the modeling simulation and theoretical calculation,the resistance change characteristics of the thin film sensor are obtained,the relationship between the impact distance and the resistance change is established,and the sensor array is designed.A three-point localization algorithm and a weight function compensation localization algorithm are proposed,which can improve the imaging accuracy of the impact position.The impact point location was observed and analyzed using ultrasonic C-scan technology.The results show that the weight function compensation positioning algorithm can accurately locate the impact of the composite structure,and the error in the X direction is 7.1%,the error in the Y direction is 0.03%,which verifies the effectiveness of the method.
基金National Natural Science Foundation of China,Grant/Award Numbers:21820102005,22132002111 Project,Grant/Award Number:B14041Fundamental Research Funds for the Central Universities,Grant/Award Number:2019CBLY001。
文摘Foodborne Listeria monocytogenes poses serious threats to public health.Fast and sensitive detection of the pathogen at the point of contamination is thus crucial to halt the spread of bacteria-related diseases.Herein,we report for the first time a fluorescent film sensor to detect the biomarker of L.monocytogenes,3-hydroxy-2-butanone.The sensor demonstrated unprecedented sensing performance for the analyte with a detection limit lower than 0.05 mg/m^(3),response time less than 1 s,full reversibility,and excellent selectivity.Further study showed that the sensor can be used to monitor the growth of L.monocytogenes with much-improved sensitivity.The superior performance of the sensor is ascribed to the specific binding,efficient charge transfer emission,and porous adlayer structure of the specially designed sensing fluorophore-based film.Our work paves the way to develop a portable detector to meet the needs for on-site and real-time detection of foodborne pathogens.
基金supported by the National Natural Science Foundation of China (42074142, 51527805, 41974139)China Postdoctoral Science Foundation (2020M680969, 2021T140099)the Fundamental Research Funds for the Central Universities (N2104013)。
文摘The study of liquid film characteristics in multiphase flow is a very important research topic, however,the characteristics of the liquid film around Taylor bubble structure in gas, oil and water three-phase flow are not clear. In the present study, a novel liquid film sensor is applied to measure the distributed signals of the liquid film in three-phase flow. Based on the liquid film signals, the liquid film characteristics including the structural characteristics and the nonlinear dynamics characteristics in three-phase flows are investigated for the first time. The structural characteristics including the proportion, the appearance frequency and the thickness of the liquid film are obtained and the influences of the liquid and gas superficial velocities and the oil content on them are investigated. To investigate the nonlinear dynamics characteristics of the liquid film with the changing flow conditions, the entropy analysis is introduced to successfully uncover and quantify the dynamic complexity of the liquid film behavior.
基金supported by National Natural Science Foundation of China(Grant No.50775210)Liaoning Provincial Natural Science Foundation of China(Grant No.20062143)Liaoning Provincial Universities Science and Technology Program of China(Grant No.05L023)
文摘In high-speed cutting, natural thermocouple, artificial thermocouple and infrared radiation temperature measurement are usually adopted for measuring cutting temperature, but these methods have difficulty in measuring transient temperature accurately of cutting area on account of low response speed and limited cutting condition. In this paper, NiCr/NiSi thin-film thermocouples（TFTCs） are fabricated according to temperature characteristic of cutting area in high-speed cutting by means of advanced twinned microwave electro cyclotron resonance（MW-ECR） plasma source enhanced radio frequency（RF） reaction non-balance magnetron sputtering technique, and can be used for transient cutting temperature measurement. The time constants of the TFTCs with different thermo-junction film width are measured at four kinds of sampling frequency by using Ultra-CFR short pulsed laser system that established. One-dimensional unsteady heat conduction model is constructed and the dynamic performance is analyzed theoretically. It can be seen from the analysis results that the NiCr/NiSi TFTCs are suitable for measuring transient temperature which varies quickly, the response speed of TFTCs can be obviously improved by reducing the thickness of thin-film, and the area of thermo-junction has little influence on dynamic response time. The dynamic calibration experiments are made on the constructed dynamic calibration system, and the experimental results confirm that sampling frequency should be larger than 50 kHz in dynamic measurement for stable response time, and the shortest response time is 0.042 ms. Measurement methods and devices of cutting heat and cutting temperature measurement are developed and improved by this research, which provide practical methods and instruments in monitoring cutting heat and cutting temperature for research and production in high-speed machining.
基金This project is supported by National Natural Science Foundation of China (No.90207003) Scientific Research Foundation of Ministry of Education and Dalian City for the Returned Overseas Chinese Scholars, China.
文摘The micro touch sensor which is designed to be used in the blood vessels isproposed. Using this touch sensor, the risk of injuring blood vessels can be reduced. A prototype ofmicro touch sensor using PZT (lead zirconate titanate) thin film synthesized by hydrothermal methodis made. The basic properties of the micro touch sensor are studied. In order to analyse theproperties of the micro touch sensor, a mathematical model is set up.
文摘In this study, a low-cost and sensitive voltammetric method was developed for the determination of paraquat (PQ2+). This was achieved by coating a glassy carbon electrode with a purified fraction of a smectite-type clay, which was then used to accumulate paraquat by an ion exchange process. The electronanalytical procedure involves two steps: the chemical preconcentration of paraquat under open-circuit conditions in an aqueous medium, followed by the voltammetric detection of the preconcentrated pollutant in a medium containing permanganate ions which significantly improved through its catalytic action the electrode response. A systematic study of the experimental conditions (pH of the accumulation and detection media, permanganate concentration in the detection medium, clay content of the coating, potential and duration of the electrolysis step) on the stripping response were examined in detail. After optimization, a linear calibration curve for paraquat was obtained in the concentration range from 1.6 to 2.8 μM, leading to a detection limit of 3.8 × 10–9 mol·L–1 (S/N = 3). The proposed method was successfully applied to the determination of paraquat in spring water.
基金Sponsored by the National Natural Science Foundation of China(Grant No. 60971020)
文摘In the present study,anodic films on aluminium alloy was used as the dielectric layer for Cu thinfilm temperature sensor,and then Cu film was deposited by unbalanced magnetron sputtering ion plating as the sensitive layer.Microstructure and surface morphologies of Cu film were investigated by optical microscope(OM),atomic force microscope(AFM) and scanning electron microscope(SEM).Electrical properties of Cu thin-film temperature sensor were tested by four-point probe technique and Digit Multimeter.The results showed that the surface roughness of anodic films can be reduced from Ra 58.096 nm to Ra 16.335 nm by proper polishing.Continual Cu stripes can be obtained both on polished anodic alumina film and smooth alumina wafer by etching after Cu film annealing.The resistivity of Cu films before and after 300 ℃ as well as 400 ℃ annealing are 12.48 mΩ·cm,5.48 mΩ·cm and 4.83 mΩ·cm,respectively.The resistances of Cu thin-film temperature sensor in 70 ℃ and 0 ℃ are 946.5 Ω and 761.15 Ω respectively.The temperature coefficient of resistivity(TCR) of the sensor is 3479 × 10^(- 6) /℃.
基金supported by the National Natural Science Foundation of China (Grant Nos.10872003,10932001 and 10525209)the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (FANEDD,GrantNo.2007B2)
文摘Developing surface-enhanced microcantilevers with improved sensitivities is of longstanding interest. In this paper, the design of surface-enhanced cantilever sensors using nano- （micro-） porous films as surface layers is proposed. The static deformation and resonance frequencies of these surface-enhanced sensors with the simultaneous effects of the eigenstrain, the surface stress and the adsorption mass are analyzed. It is shown that the sensitivities of these novel cantilever sensors for the static deformation and resonance frequencies can be tuned by the porosity, the size of the pores and the structure of the porous films. For the three kinds of cantilever consisting of solid films, films with aligned cylindrical micro-scale pores, and those with nano-scale pores, the nano-porous one has the highest static and dynamic sensitivities, whereas the solid one has the lowest.
文摘The Cl2-sensitive heteropolysiloxanes(HPS) film was formed on the interdigital capacitor based on silicon dioxide by means of sol-gel process and spin-on technique.Measurements of interdigital capacitance were performed at room temperature for frequencies 100 Hz,1 kHz and 10 kHz.It is shown that there is a linear relationship between the capacitance and the concentration of chlorine gas.Influences of the measurement frequency and film thickness of silicate on the sensitivity of the sensor to C12 gas were discussed.And organically modified N,N-diethylaminopropyl-trimethoxysilane (APMS) had a much higher sensitivity.
文摘Present paper reports the synthesis of SnO2, its characterization and performance as Liquefied Petroleum Gas (LPG) Sensor. XRD pattern revealed the tetragonal crystalline nature of the material. Crystallites sizes were in the range 14 - 30 nm. Tin oxide thick film was prepared by using screen printing technique. After that these were investigated through SEM. SEM image of thick-film surface was spherical in shape and porous. Further at room temperature, the film was exposed to LPG in a controlled gas chamber and variations in resistance with the concentrations of LPG were observed. The maximum value of average sensitivity of thick film was 37 MΩ/min for 5 vol. % of LPG. Sensor responses as a function of exposure and response times were also estimated and maximum sensor response were found 273 and 312 for 4 and 5 vol. % of LPG respectively.
基金supported by National Natural Foundation of China under Grant No.61176066 and 61101031
文摘The formaldehyde （HCHO） detecting at room temperature is of great significance. Different ratios of P3HT/ZnO composite films （3：1, 1：1, and 1：3） were deposited on the organic thin film transistor （OTFT） by spray-deposition technology, and the electrical properties and HCHO-sensing properties of all the prepared OTFT devices were measured by Keithley 4200-SCS source measurement unit. The results show that the OTFT sensor based on the P3HT/ZnO films with the ratio of 1：1 exhibited the best output and transfer curves. Different changing tendency were observed with the increase of ZnO proportion when exposed to HCHO at room temperature, and the device with the ratio of 1：1 behaved a good response and recovery characteristics.
文摘A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobalt-iron alloy electrode greatly improved the hydrogen-ion sensor response performance, i.e., the sensor worked stably for more than 7 weeks and showed a quick response time of several seconds. Among the cobalt and iron alloy systems tested, the electrodeposited Co58Fe42 thin-film electrode showed the best EMF response characteristics, i.e., the sensor exhibited a linear potentiometric response to hydrogen-phosphate ion at the concentration range between 1.0 × 10–5 and 1.0 × 10–2 M with the slope of –43 mV/decade at pH 5.0 and at 30℃. A sensing mechanism of the Co-based potentiometric hydrogen-phosphate ion sensor was proposed on the basis of results of instrumental analysis.
文摘Hydrogen has been recently attracted much attention with respect to high energy-conversion efficiency and low environmental burden. However, hydrogen gas is dangerous due to an explosive gas and a fast combustion rate. Therefore, the development of hydrogen sensor with high accuracy and reliability that can detect hydrogen easily is required. Especially, a flexible hydrogen sensor is useful because it has a high degree of freedom with respect to the shape of location in which the sensor is to be located. A flexible hydrogen sensor—namely, a WO3 thin film formed on a PET film by the sol-gel method using photo irradiation—based on gasochromism of WO3 was developed. By irradiating a thin film, which was prepared by using WO3 precursor solution synthesized by the sol-gel method, with ultraviolet rays, a high-purity WO3 film could be prepared on PET at low temperature. The sensor was structured as a polystyrene (PS) film containing palladium (Pd) laminated on a WO3 film. The WO3 layer was porous, so the PS containing Pd atoms solution penetrated the WO3 layer. WO3 reacted with hydrogen gas and instantly turned blue as the transmittance of the WO3 layer changed. The sensor showed high reactivity even for hydrogen concentration below 4% (1%, 0.5%, 0.25%, and 0.1%), which was the lower limit of hydrogen ignition, and a linear relationship between hydrogen concentration and change in transmittance was found. Moreover, the resistance of the WO3 film significantly and instantaneously changed due to hydrogen-gas exposure, and the hydrogen concentration and resistance change showed a linear relationship. It is therefore possible to quantitatively detect low concentrations of hydrogen by using changes in transmittance and resistance as indices. Since these changes occur selectively under hydrogen at room temperature and normal pressure, they form the basis of a highly sensitive hydrogen sensor. Since the developed sensor is flexible, it has a high degree of freedom with respect to the shape of location in which the sensor is to be
