Deciphering hydrocarbon generation and accumulation stage is of significance to understand oil and gas evolution and seek exploration targets.Taking the Upper Paleozoic buried-hills in the Huanghua Depression,Bohai Ba...Deciphering hydrocarbon generation and accumulation stage is of significance to understand oil and gas evolution and seek exploration targets.Taking the Upper Paleozoic buried-hills in the Huanghua Depression,Bohai Bay Basin,as a case study,hydrocarbon generation environment and detailed accumulation process are revealed by fluid inclusions observations,Laser Raman spectroscopy,Fourier Infrared spectroscopy,and K-Ar isotope measurements.The results show that both oil and gas inclusion were captured in the quartz overgrowth,dissolved feldspar and calcite microfractures,showing blue to dark brown fluoresce.The grains containing oil inclusions index(GOI)of oil,oil&gas and gas being 25%,65%,and 10%and the inclusions with abundant methyl groups and short chains,both indicate high thermal maturity.One series of fluids inclusion is generally observed,evidenced by the concentrated homogenization temperature of 135-145℃ and salinity of 3%-15 w.t.%NaCl equiv,indicating one primary charging stage.The gas and gas&liquid inclusions mainly contain CH_(4),with also peaks indicating CO_(2) and N_(2.)The Carboniferous and Permian biomarkers show reducing environment with brackish water,with organic matter sources both from marine and continental.The relative content ofααα20RC_(27),ααα20RC_(28),andααα20RC_(29) exhibit source contributions both from algae and higher plants,and mainly of II2 to III kerogen.Both coal derived gas and oil associated hydrocarbons are identified from most of the buried-hills.Combining the fluid homogenization temperature and salinity,as well as the thermal evolution history,the hydrocarbon generated from the Upper Paleozoic was concentrated at the end of the Eocene(40 Ma±),while the beginning of charging is 60 Ma±.The Wumaying Buried-hill is of only coal derived gas and has potential for inner coal measure natural gas exploration.The results provide a detailed understanding of hydrocarbon accumulations in the study area,which can also be reference for improving petroleum exploration efficiency in similar basins.展开更多
To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiat...To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.展开更多
The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jur...The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jurassic-Early Cretaceous high-K calc-alkaline intrusive rocks.The Cu-Au mineralization is commonly related to quartz-sericite-chlorite alteration dominantly composed of chalcopyrite,gold,sphalerite,pyrite,bornite,hematite,covellite,chalcocite,malachite,and azurite.The Goshgarchay copper-gold deposit,which is 600 m wide and approximately 1.2 km long,is seen as a faultcontrolled and vein-,stockwork-and disseminated type deposit.The Goshgarchay Cu-Au deposit predominantly comprises Cu(max.64500 ppm)and Au(max.11.3 ppm),while it comprises relatively less amounts Zn(max.437 ppm),Mo(max.47.5 ppm),Pb(max.134 ppm),and Ag(max.21 ppm).The homogenization temperatures and salinities of fluid inclusions in quartz for stage Ⅰ range from 380℃ to 327℃,and 6.9 wt% to 2.6 wt% NaCl eq.,respectively.Thand salinities in quartz for stage Ⅱ range from 304℃ to 253℃,and 7.6 wt% to 3.2 wt% NaCl eq.,respectively.The calculated δ^(34)S_(h2s)values(-1.5‰ to 5.5‰)of sulfides and especially the narrow range of δ^(34)S_(h2s) values of chalcopyrite and bornite(between -0.07‰ and +0.7‰)indicate that the source of the Goshgarchay Cu-Au mineralization is magmatic.Based on the mineralogical,geochemical,fluid inclusion,and sulfur isotopic data,the Goshgarchay Cu-Au deposit represents a late stage peripheral magmatic-hydrothermal mineralization probably underlain by a concealed porphyry deposit.展开更多
The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristi...The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.展开更多
The complexity of diagenesis and hydrocarbon accumulation in the deep reservoirs in southern Junggar Basin restricts hydrocarbon exploration in the lower reservoir assemblage. The lithofacies and diagenesis of reservo...The complexity of diagenesis and hydrocarbon accumulation in the deep reservoirs in southern Junggar Basin restricts hydrocarbon exploration in the lower reservoir assemblage. The lithofacies and diagenesis of reservoirs in the Cretaceous Qingshuihe Formation in the Gaoquan structure of the Sikeshu Sag, southern Junggar Basin were analyzed. On this basis, the thermal history was calibrated using calcite in-situ U-Pb dating and fluid inclusion analysis to depict the hydrocarbon accumulation process in the Gaoquan structure. The results show that the Qingshuihe reservoir experienced two phases of calcite cementation and three phases of hydrocarbon charging. The calcite cements are dated to be (122.1±6.4) Ma, (14.4±1.0) Ma - (14.2±0.3) Ma. The hydrocarbon charging events occurred at around 14.2-30.0 Ma (low-mature oil), 14.2 Ma (mature oil), and 2 Ma (high-mature gas). The latter two phases of hydrocarbon charging contributed dominantly to the formation of reservoir. Due to the S-N compressive thrust activity during the late Himalayan period since 2 Ma, the traps in the Gaoquan structure were reshaped, especially the effective traps which developed in the main reservoir-forming period were decreased significantly in scale, resulting in weak hydrocarbon shows in the middle-lower part of the structure. This indicates that the effective traps in key reservoir-forming period controlled hydrocarbon enrichment and distribution in the lower reservoir assemblage. Calcite U-Pb dating combined with fluid inclusion analysis can help effectively describe the complex diagenesis and hydrocarbon accumulation process in the central-west part of the basin.展开更多
In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion...In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.展开更多
The Mokama granites are located in the Kibara belt (KIB) and hosts tin oxide group minerals (TOGM: Sn-W), and sulfide group minerals (SGM: Cu-Zn-Fe-As). The essential of Cu mineralization (non-economic deposit) is dis...The Mokama granites are located in the Kibara belt (KIB) and hosts tin oxide group minerals (TOGM: Sn-W), and sulfide group minerals (SGM: Cu-Zn-Fe-As). The essential of Cu mineralization (non-economic deposit) is disseminated inside the rock and consists of minerals (Raman, EPMA and metallographic microscopy) including chalcopyrite and bornite that are replaced by chalcocite and covellite, and the last also replaced later by malachite. The chemistry (XRF, LA-ICP-MS) of these peraluminous S-type leucogranites show SiO<sub>2</sub> (71 wt% - 79 wt%), ASI (1.4 - 3.1 molar), and are enriched in Rb (681 - 1000 ppm), Ta (12–151 ppm), Sn (43 - 142 ppm), Cu (10 - 4300 ppm), Zn (60 - 740 ppm), U (2.2 - 20.7 ppm) while depleted in Zr (20 - 31 ppm), Sr (20 - 69 ppm), Hf (1.3 - 2.0 ppm), Th (2.2 - 18.9 ppm), W (9 - 113 ppm), Pb (5 - 50 ppm), Ge (5 - 10 ppm), Cs (21 - 53 ppm) and Bi (0.6 - 17.4 ppm) and low ratios of (La/Yb) N, (Gd/Yb) N, (La/Sm) N). Fluid inclusion assemblages (FIAs) hosted in quartz in the Mokama granites show ranges of salinities of 4 - 23 wt% (NaCl equivalent) and homogenization temperatures (Th) of 190°C - 550°C. A boiling assemblage in the granite suggests a fluid phase separation occurred at about 380 - 610 bars, and this corresponds to apparent paleodepths of approximately 1 - 2 km (lithostatic model) or 3 - 5 km (hydrostatic model). FIAs hosted in TOGM such as cassiterite (salinities of 2 wt% - 10 wt% and Th of 220°C - 340°C) helped set up the possible temperature limit of SGM (Cu sulfide) precipitations that are estimated below 200°C.展开更多
Fluid inclusion signal strength and visual inclusion abundance are generally lower along migration pathways than in charged reservoirs from the same area. A zone that displays strong fluid inclusion stratigraphy (FIS)...Fluid inclusion signal strength and visual inclusion abundance are generally lower along migration pathways than in charged reservoirs from the same area. A zone that displays strong fluid inclusion stratigraphy (FIS) hydrocarbon indications and high visualized petroleum inclusion abundance, indicates paleo-charge or in some cases a migration pathway, e.g, where inclusion abundance is enhanced by extensive microfracturing. In this study, fluid inclusion data are interpreted in seven offshore wells of the Lamu Basin to enhance the understanding of hydrocarbon generation, migration and migration pathways. The study also examines the interrelationship among rock texture, rock composition and trapped fluid distribution in the study area. The studies were based on FIS analyzed data courtesy of Fluid Inclusion Technologies (FIT) Inc. in USA laboratories. FIT conducted analysis on 391 samples from the Paleocene to Upper Jurassic (Kiboko-1 well), 249 from the Paleoecene to Campanian (Kubwa-1 well), 106 from the Maastrichtian to Turonian (Mbawa-1 well), 59 from the Eocene to Campanian (Pomboo-1 well), 26 form the Lower Eocene to Maastrichtian (Simba-1 well), 16 from the Eocene to Maastrichtian (Kipini-1 well) and 11 from the Maastrichtian to Campanian (Kofia-1 well). It also made analysis on sidewall core sample plates, with 44 from the Maastrichtian to Campanian (Kubwa-1 well), 108 from the Campanian to Upper Jurassic (Kiboko-1 well) and 8 from the Campanian (Pomboo-1 well) for petrographic evaluation. For photomicroscopy, thin sections were examined under a petrographic microscope using Ultra Violet (UV) fluorescence and microthermometry, in order to verify the presence of petroleum bearing inclusions in the rock samples and to explore textural relationships that may yield additional information on the timing of hydrocarbon migration or generation. Gas shows in Mbawa-1 well is a result of generated hydrocarbons from the carbonate interbeds in the Upper Cretaceous. Gas shows are pockets trapped in the thin carbonate rich beds. There is low abundance of upper-low, moderate and upper-moderate gravity liquid petroleum inclusions in Kubwa-1 well (central deep offshore). The low abundance suggests migration events rather than paleo-accumulations, possibly involving several discrete charges. Despite sufficient vitrinite reflectance and total organic carbon (TOC) content, the temperatures are still insufficient for hydrocarbon generation in the southern deep offshore in the region where Kiboko-1 well is located. There is no sufficient evidence for access to mature source rocks in the deep offshore basin.展开更多
Deep-seated potassium-rich brines were identified in the Jiangling Basin,South China.Although magmatichydrothermal sources have been proposed,the relationship between brine-type potash mineralization and volcanism rem...Deep-seated potassium-rich brines were identified in the Jiangling Basin,South China.Although magmatichydrothermal sources have been proposed,the relationship between brine-type potash mineralization and volcanism remains unclear.In this study,U-Pb geochronology,geochemistry,fluid inclusion and C-O isotopic compositions of hydrothermal vein minerals in the Jiangling Basin are examined.Laser ablation U-Pb dating of calcite veins indicates that the ages are slightly younger than the formation age of the Balingshan basalt.Fluid inclusions in hydrothermal minerals show medium–low homogenization temperatures(160–220℃)and low salinities(0.14 to 4.9 wt%NaCl eqv.)and densities(0.882–0.944 g/cm^(3)).The liquid compositions of fluid inclusions in calcite veins from sedimentary strata have higher contents of potassium,compared with those from basalt.The coupled negativeδ^(13)CPDB(-10.3‰to-8.0‰)and positiveδ^(18)OSMOW(17.4‰to 20.7‰)values imply that calcite precipitation resulted from CO_(2)degassing of the basaltic magmatic fluids,as indicated by the gas composition of these inclusions in hydrothermal minerals.Rare earth element patterns indicate that water-rock interaction between hydrothermal fluids and sedimentary wall rocks contributed to the calcite precipitation in sedimentary strata.It is proposed that high-temperature water-rock interaction between magmatic fluids and sedimentary strata resulted in the potassium enrichment in fluids,interpreted as one of the sources of potassium-rich brines in the Jiangling Basin.展开更多
We studied the fluid inclusions of the Jiguanshan Mo deposit in China,which is a large porphyry deposit located in the southern Xilamulun Metallogenic Belt.The irregular Mo ore body with various types of hydrothermal ...We studied the fluid inclusions of the Jiguanshan Mo deposit in China,which is a large porphyry deposit located in the southern Xilamulun Metallogenic Belt.The irregular Mo ore body with various types of hydrothermal veinlets is hosted by Late Jurassic granite porphyry.Intense hydrothermal alterations in the deposit from the core to margin are silicification-potassium feldspar alteration,pyrite-quartz-sericite-fluorite alteration,and propylitic alteration.Based on the mineral assemblages and crosscutting relationships of ore veins,the ore-forming process were divided into three stages and two substages:quartz-pyrite veins(stage I)associated with potassic alteration;quartz-molybdenite-chalcopyrite-pyrite veins(substage Ⅱ-1)and quartz-molybdenite-fluorite veins(substage Ⅱ-2)associated with phyllic alteration;and fluorite-quartz-carbonate veins(stage Ⅲ)with carbonation.Five majorfluid inclusions(FIs)types were distinguished in the quartz associated with oxide and sulfide minerals,i.e.polyphase brine(Pb-type),opaque-bearing brine(Ob-type),solid halite(S-type),two-phase aqueous(A-type),and vapor(Vtype)inclusions.The FIs of stage I were composed of liquid-rich S-,A-,and V-type FIs with homogenization temperatures and salinities of 490 to 511℃ and 8.9 to 56.0 wt%NaCl equiv.,respectively.The FIs of substage Ⅱ-1 are composed of Pb-,Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 352 to 460℃ and 3.7 to 46.1 wt%NaCl equiv,respectively.The FIs of substage Ⅱ-2 are Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 234 to309°C and 3.7 to 39.2 wt%NaCl equiv,respectively.The FIs of stage Ⅲ are A-type FIs with homogenization temperatures and salinities of 136 to 172℃ and 1.1 to 8.9 wt%NaCl equiv,respectively.Fluid boiling,which resulted in the precipitation of sulfides,occurred in stages I andⅡ.The initial ore-forming fluids of the Jiguanshan deposit had high temperature,high salinity,and belonged to an F-rich NaCl±KCl-H2O system.The fluids gradually evolved to low temperature,low salinity,and belonged to a NaCl-H2O system.Studies of the hydrogen and oxygen isotope compositions of quartz(δ^18OH2O=-7.3 to 6.3%,δDH2O=-104.3 to-83.3%)show that the ore-formingfluids gradually evolved from magmatic water to meteoric water.展开更多
The Dayingezhuang gold deposit,hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China,contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone....The Dayingezhuang gold deposit,hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China,contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone.The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type(i.e.,disseminated and veinlet)mineralization.Mineralization and alteration are structurally controlled by the NE-to NNE-striking Linglong detachment fault.The mineralization can be divided into four stages:(K-feldspar)–pyrite–sericite–quartz,quartz–gold–pyrite,quartz–gold–polymetallic sulfide,and quartz–carbonate,with the majority of the gold being produced in the second and third stages.Based on a combination of petrography,microthermometry,and laser Raman spectroscopy,three types of fluid inclusion were identified in the vein minerals:NaCl–H2 O(A-type),CO2–H2 O–NaCl(AC-type),and pure CO2(PC-type).Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions,with rare PC-type inclusions.These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt%NaCl equivalent.Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions,with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt%NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt%NaCl equivalent for the third stage.In contrast,quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions,with minor occurrences of AC-type inclusions;these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt%NaCl equivalent.Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and f O2 in the early stages,to Au(HS)2–under neutral-pH conditions at lower temperatures and f O2 in the later stages.The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.展开更多
Fluorite mineralization occurs along fractures and cracks of Middle Eocene and Pliocene limestones and marls in the north and northeast of the P?hrenk region (?i?ekdagi, Kirsehir). Tb/Ca ( Tb/La and Y/Ho ratios were o...Fluorite mineralization occurs along fractures and cracks of Middle Eocene and Pliocene limestones and marls in the north and northeast of the P?hrenk region (?i?ekdagi, Kirsehir). Tb/Ca ( Tb/La and Y/Ho ratios were obtained from REE contents of fluorites which have revealed that mineralization is of hydrothermal type. Negative Ce anomalies and positive Eu anomalies reflect that hydrothermal solutions once had high oxygen fugacity. Fluid inclusion studies indicate that homogenization temperatures of mineralization varied between 90oC and 200oC, and hydrothermal solutions are composed of NaCl + KCl + MgCl2 + H2O. In addition, salinity measurements show that hydrothermal solutions were mixed with meteoric or rock formation water. Geologic setting, REE geochemistry and fluid inclusion studies suggest that mineralization was deposited from a solution generated by mixing of magmatic and meteoric water under epithermal conditions.展开更多
The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range(NE China)consists of quartzsulfide vein-type and breccia-type mineralization,related to granite porphyry.Hydrothermal alteration is well-de...The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range(NE China)consists of quartzsulfide vein-type and breccia-type mineralization,related to granite porphyry.Hydrothermal alteration is well-developed and includes potassic-silicic-sericitic alteration,phyllic alteration and propylitic alteration.Three stages of mineralization are recognized on the basis of field evidence and petrographic observation,demarcated by assemblages of quartz-pyritearsenopyrite(early stage),quartz-polymetallic sulfide(intermediate stage)and quartz-carbonate-pyrite(late stage).Zircon LA-ICP-MS U-Pb dating indicates that the granite porphyry was emplaced at 146.7±1.2 Ma(Late Jurassic).Microthermometry and laser Raman spectroscopy shows that ore minerals were deposited in conditions of intermediate temperatures(175-359℃),low salinity(0.5-9.3 wt% Na Cl eqv.)and low density(0.60-0.91 g/cm^(3)).Ore-forming fluids were derived largely from magmatic hydrothermal processes,with late-stage addition of meteoric water,belonging to a H_(2)O-NaCl-CO_(2)±CH_(4) system.The δ^(34)SV-CDT values range from 0.75‰ to 4.70‰.The ^(206)Pb/^(204)Pb,^(207)Pb/^(204)Pb,and ^(208)Pb/^(204)Pb values of the ore minerals are in the ranges of 18.240-18.371,15.542-15.570,and 38.100-38.178,respectively.Data for the S and Pb isotopic systems indicate that the ore-forming metals and sulfur were derived from Mesozoic magma.Based on the geological characteristics and geochemical signatures documented in this study,we conclude that the Dongjun deposit is a mesothermal magmatic hydrothermal vein-type Pb-Zn-Ag deposit controlled by fractures and related to granite porphyry,in response to Late Jurassic tectonic-magmatic-hydrothermal activity.We further conclude that fluid immiscibility,fluid mixing and fluid-rock interactions were the dominant mechanisms for deposition of the ore-forming materials.展开更多
The large tonnage Maoling gold deposit(25 t@3.2 g/t)is located in the southwest Liaodong Peninsula,North China Craton.The deposit is hosted in the Paleoproterozoic metamorphic rocks.Four stages of mineralization were ...The large tonnage Maoling gold deposit(25 t@3.2 g/t)is located in the southwest Liaodong Peninsula,North China Craton.The deposit is hosted in the Paleoproterozoic metamorphic rocks.Four stages of mineralization were identified in the deposit:(stageⅠ)quartz-arsenopyrite±pyrite,(stageⅡ)quartz-goldarsenopyrite-pyrrhotite,(stageⅢ)quartz-gold-polymetallic sulfide,and(stageⅣ)quartz-calcitepyrrhotite.In this paper,we present fluid inclusion,C-H-O-S-Pb-He-Ar isotope data,zircon U-Pb,and gold-bearing sulfide(i.e.arsenopyrite and pyrrhotite)Rb-Sr age of the Maoling gold deposit to constrain its genesis and ore-forming mechanism.Three types of fluid inclusions were distinguished in quartzbearing veins,including liquid-rich two-phase(WL type),gas-rich two-phase(GL type),and daughter mineral-bearing fluid inclusions(S type).Fluid inclusions data show that the homogenization at temperatures 197 to 372°C for stageⅠ,126 to 319°C for stageⅡ,119 to 189°C for stageⅢ,and 115 to 183°C for stageⅣ,with corresponding salinities of 3.7 to 22.6 wt.%,4.7 to 23.2 wt.%,5.3 to 23.2 wt.%,and 1.7 to14.9 wt.%Na Cl equiv.,respectively.Fluid boiling was the critical factor controlling the gold and associated sulfide precipitation at Maoling.Hydrogen and oxygen stable isotopic analyses for quartz yielded δ^(18)O=-5.0‰ to 9.8‰ and δD=-133.5‰ to-77.0‰.Carbon stable isotopic analyses for calcite and ankerite yielded δ^(13)C=-2.3‰to-1.2‰ and O=7.9‰ to 14.1‰.The C-H-O isotope data show that the oreforming fluids were originated from magmatic water with meteoric water input during mineralization.Hydrothermal inclusions in arsenopyrite have ^(3)He/^(4)He ratios of 0.002 Ra to 0.054 Ra,and ^(40)Ar/^(36)Ar rations of 1225 to 3930,indicating that the ore-forming fluids were dominantly derived from crustal sources almost no mantle input.Sulfur isotopic values of Maoling fine-grained granite range from6.‰1 to 9.8‰,with a mean of 7.7‰,δ^(34)S values of arsenopyrite from the mineralized phyllite(host rock)range from 8.9‰ to 10.6‰,with a mean of 10.0‰,by contrast,δ^(34)S values of sulfides from ore vary between 4.3‰and 10.6‰,with a mean of 6.8‰,suggesting that sulfur was mainly originated from both the host rock and magma.Lead radioactive isotopic analyses for sulfides yielded^(206)Pb/^(204)Pb=15.830–17.103,^(207)Pb/^(204)Pb=13.397–15.548,^(208)Pb/^(204)Pb=35.478–36.683,and for Maoling fine-grained granite yielded ^(206)Pb/^(204)Pb=18.757–19.053,^(207)Pb/^(204)Pb=15.596–15.612,and ^(208)Pb/^(204)Pb=38.184–39.309,also suggesting that the ore-forming materials were mainly originated from the host rocks and magma.Zircon U-Pb dating demonstrates that the Maoling fine-grained granite was emplaced at 192.7±1.8 Ma,and the host rock(mineralized phyllite)was emplaced at some time after2065.0±27.0 Ma.Arsenopyrite and pyrrhotite give Rb–Sr isochron age of 188.7±4.5 Ma,indicating that both magmatism and mineralization occurred during the Early Jurassic.Geochronological and geochemical data,together with the regional geological history,indicate that Early Jurassic magmatism and mineralization of the Maoling gold deposit occurred during the subducting Paleo-Pacific Plate beneath Eurasia,and the Maoling gold deposit is of the intrusion-related gold deposit type.展开更多
Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-ric...Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-rich brine. However, no soluble potassium salt deposit were found. In this study, the halite in well Changping 3 which is located at the eastern part of the Sichuan basin was studied using the characteristics, hydrogen and oxygen isotopes of the fluid inclusion in halite to reconstruct the paleoenvironment. The salt rocks in well Changping 3 can be divided into two types: grey salt rock and orange salt rock. The result shows that the isotopic composition of the halite fluid inclusion is distinct from the global precipitation line reflecting that the salt formation process is under strong evaporation conditions and the climate is extremely dry. At the same time, compared with the hydrogen and oxygen isotopes of brine in the Sichuan Basin and the hydrous isotope composition of the inclusions in the salt inclusions of other areas in China, it is shown that the evaporation depth of the ancient seawater in the Sichuan Basin was high and reached the precipitation of potassium and magnesium stage.展开更多
The Budunhua Cu deposit is located in the Tuquan ore-concentrated area of the southern Great Xing’an Range,NE China.This deposit includes the southern Jinjiling and northern Kongqueshan ore blocks,separated by the Bu...The Budunhua Cu deposit is located in the Tuquan ore-concentrated area of the southern Great Xing’an Range,NE China.This deposit includes the southern Jinjiling and northern Kongqueshan ore blocks,separated by the Budunhua granitic pluton.Cu mineralization occurs mainly as stockworks or veins in the outer contact zone between tonalite porphyry and Permian metasandstone.The ore-forming process can be divided into four stages involving stage Ⅰ quartz-pyrite-arsenopyrite;stage Ⅱ quartz-pyrite-chalcopyrite-pyrrhotite;stage Ⅲ quartz--polynetallic sulfides;and stage IV quartz-calcite.Three types of fluid inclusions(FIs) can be distinguished in the Budunhua deposit:liquid-rich two-phase aqueous FIs(L-type),vapour-rich aqueous FIs(V-type),and daughter mineral-bearing multi-phase FIs(S-type).Quartz of stages Ⅰ-Ⅲ contains all types of FIs,whereas only L-type FIs are evident in stage Ⅳ veins.The coexisting V-and S-type FIs of stages Ⅰ-Ⅲ have similar homogenization temperatures but contrasting salinities,which indicates that fluid boiling occurred.The FIs of stages Ⅰ,Ⅱ,Ⅲ,and Ⅳyield homogenization temperatures of 265-396℃,245-350℃,200-300℃,and 90-228℃ with salinities of3.4-44.3 wt.%,2.9-40.2 wt.%,1.4-38.2 wt.%,and 0.9-9.2 wt.% NaCl eqv.,respectively.Ore-forming fluids of the Budunhua deposit are characterized by high temperatures,moderate salinities,and relatively oxidizing conditions typical of an H2 O-NaCl fluid system.Mineralization in the Budunhua deposit occurred at a depth of0.3-1.5 km,with fluid boiling and mixing likely being responsible for ore precipitation.C-H-O-S-Pb isotope studies indicate a predominantly magmatic origin for the ore-forming fluids and materials.LA-ICP-MS zircon U-Pb analyses indicate that ore-forming tonalite porphyry and post-ore dioritic porphyrite were formed at 151.1±1.1 Ma and 129.9±1.9 Ma,respectively.Geochemical data imply that the primary magma of the tonalite porphyry formed through partial melting of Neoproterozoic lower crust.On the basis of available evidence,we suggest that the Budunhua deposit is a porphyry ore system that is spatially,temporally,and genetically associated with tonalite porphyry and formed in a post-collision extensional setting following closure of the Mongol-Okhotsk Ocean.展开更多
Ali Javad porphyry copper-gold deposit is located in Arasbaran porphyry copper belt at northwestern Iran, some 20 km east of Sungun Mine. Porphyry mineralization at the Ali Javad deposit occurred in post-Oligocene qua...Ali Javad porphyry copper-gold deposit is located in Arasbaran porphyry copper belt at northwestern Iran, some 20 km east of Sungun Mine. Porphyry mineralization at the Ali Javad deposit occurred in post-Oligocene quartz monzonite bodies which intruded in the Eocene volcanic rocks. Mineralization occurred as veins, veinlets and dissemination both as hypogene and supergene type. Several types of veinlets were distinguished during the study of the deposit. Fluid inclusion studies on fluids trapped in quartz which were taken from drill core samples indicated a wide range of homogenization temperature in the veinlets from 138°C to 565°C which their salinity demonstrated 33 - 61 wt% NaCl equivalent. Mineralizing fluids density at the deposit was 0.8 - 1.2 g/cm<sup>3</sup>. Fluid inclusion studies suggested that Ali Javad deposit is an Au-rich porphyry copper deposit;its fluid inclusion features were comparable with other porphyry deposits.展开更多
In the Kenticha area,a series of barren to rare metal-bearing pegmatites intruded into the Neoproterozoic Adola Belt.The pegmatites host world-class Nb and Ta deposits and significant Li and Be reserves.In this contri...In the Kenticha area,a series of barren to rare metal-bearing pegmatites intruded into the Neoproterozoic Adola Belt.The pegmatites host world-class Nb and Ta deposits and significant Li and Be reserves.In this contribution,fluid inclusion data and feldspar geothermometry have been combined to define the crystallization condition of the Kenticha rare-metal pegmatite.Primary and complex assemblages of secondary fluid inclusions representing episodic fluid circulations have been identified in quartz and spodumene.A primary aqueous-carbonic fluid of low salinity aqueous solution with liquid and vapour CO_(2) phases,secondary carbonic fluid rich and carboniconly fluids,and multiple generations of secondary aqueous inclusions that represent sub-solidus hydrothermal circulation have been identified.All aqueous inclusions were homogenized into the liquid phase between 100 and 290℃.Aqueous-carbonic inclusions were homogenized,usually via a critical transition[T_(h)(LV→SCF)]between 241 and 397℃,or less commonly,via a dew-point transition[T_(h)(LV→V)]between 213 and 264℃.Crystallization of the rare-element pegmatite is certainly associated with the late-stage magmatic or early hydrothermal low-salinity aqueous-carbonic fluid that homogenizes to critical conditions.A combination of microthermometric data and existing experimentally determined solidus from flux and volatile bearing haplogranite suggests exsolution of fluids from hydrous silicate melt,perhaps during crystallization of the aplitic layer.The fluids were then trapped and isobarically cooled along a reasonable geothermal gradient within the pegmatite unit down to a temperature of around 397℃.展开更多
Trapped ancient microorganisms in halite fluid inclusions are of special interest to the understanding of biology and ecology in salt lake systems.With the integration of petrologic,microthermometric,and Raman spectro...Trapped ancient microorganisms in halite fluid inclusions are of special interest to the understanding of biology and ecology in salt lake systems.With the integration of petrologic,microthermometric,and Raman spectroscopic analyses,this study utilizes fluid inclusions from Chaka Salt Lake,eastern Qaidam Basin,NW China,to assess the possibility of microorganism-trapping by fluid inclusions.Here,we report that the solid phase of some primary fluid inclusions contains carotenoids,which is interpreted as evidence of Dunaliella algae,and that the coexisting liquid phase comprises SO_(4)^(2-).The homogenization temperatures of single-phase primary fluid inclusions indicate that the precipitation temperature of the Holocene halite in Chaka Salt Lake ranges from 13.5℃ to 36.4℃.This suggests that fluid inclusions in halite are a good medium for trapping and preserving ancient microorganisms and organic matter in salt lakes,and that Raman spectroscopy has good potential to identify halophilic archaea.展开更多
The Piaotang deposit is one of the largest vein-type W-polymetallic deposits in southern Jiangxi Province,South China.The coexistence of wolframite and cassiterite is an important feature of the deposit.Based on detai...The Piaotang deposit is one of the largest vein-type W-polymetallic deposits in southern Jiangxi Province,South China.The coexistence of wolframite and cassiterite is an important feature of the deposit.Based on detailed petrographic observations,microthermometry of fluid inclusions in wolframite,cassiterite and intergrown quartz was undertaken.The inclusions in wolframite were observed by infrared microscope,while those in cassiterite and quartz were observed in visible light.The fluid inclusions in wolframite can be divided into two types:aqueous inclusions with a large vapor-phase proportion and aqueous inclusions with a small vapor-phase ratio.The homogenization temperature(Th)of inclusions in wolframite with large vapor-phase ratios ranged from 280℃ to 390℃,with salinity ranging from 3.1 to 7.2 wt%NaCl eq.In contrast,the Th values of inclusions with small vapor-phase ratios ranged from 216℃ to 264℃,with salinity values ranging from 3.5 to 9.3 wt%NaCl eq.T_(h) values of primary inclusions in cassiterite ranged from 316℃ to 380℃,with salinity ranging from 5.4 to 9.3 wt%NaCl eq.T_(h) values for primary fluid inclusions in quartz ranged from 162℃ to 309℃,with salinity values ranging from 1.2 to 6.7 wt%NaCl eq.The results show that the formation conditions of wolframite,cassiterite and intergrown quartz are not uniform.The evolutionary processes of fluids related to these three kinds of minerals are also significantly different.Intergrown quartz cannot provide the depositional conditions of wolframite and cassiterite.The fluids related to tungsten mineralization for the NaCl-H_(2)O system had a medium-to-high temperature and low salinity,while the fluids related to tin mineralization for the NaCl-H_(2)O system had a high temperature and medium-to-low salinity.The results of this study suggest that fluid cooling is the main mechanism for the precipitation of tungsten and tin.展开更多
基金This study was supported by the National Natural Science Foundation of China(Grant No.42072194,U1910205)the Fundamental Research Funds for the Central Universities(800015Z1190,2021YJSDC02).
文摘Deciphering hydrocarbon generation and accumulation stage is of significance to understand oil and gas evolution and seek exploration targets.Taking the Upper Paleozoic buried-hills in the Huanghua Depression,Bohai Bay Basin,as a case study,hydrocarbon generation environment and detailed accumulation process are revealed by fluid inclusions observations,Laser Raman spectroscopy,Fourier Infrared spectroscopy,and K-Ar isotope measurements.The results show that both oil and gas inclusion were captured in the quartz overgrowth,dissolved feldspar and calcite microfractures,showing blue to dark brown fluoresce.The grains containing oil inclusions index(GOI)of oil,oil&gas and gas being 25%,65%,and 10%and the inclusions with abundant methyl groups and short chains,both indicate high thermal maturity.One series of fluids inclusion is generally observed,evidenced by the concentrated homogenization temperature of 135-145℃ and salinity of 3%-15 w.t.%NaCl equiv,indicating one primary charging stage.The gas and gas&liquid inclusions mainly contain CH_(4),with also peaks indicating CO_(2) and N_(2.)The Carboniferous and Permian biomarkers show reducing environment with brackish water,with organic matter sources both from marine and continental.The relative content ofααα20RC_(27),ααα20RC_(28),andααα20RC_(29) exhibit source contributions both from algae and higher plants,and mainly of II2 to III kerogen.Both coal derived gas and oil associated hydrocarbons are identified from most of the buried-hills.Combining the fluid homogenization temperature and salinity,as well as the thermal evolution history,the hydrocarbon generated from the Upper Paleozoic was concentrated at the end of the Eocene(40 Ma±),while the beginning of charging is 60 Ma±.The Wumaying Buried-hill is of only coal derived gas and has potential for inner coal measure natural gas exploration.The results provide a detailed understanding of hydrocarbon accumulations in the study area,which can also be reference for improving petroleum exploration efficiency in similar basins.
基金funded by a Natural Science Foundation of Hebei Province(Grant No.D2020403019)the Natural Science Foundation of Hebei Province(Grant Nos.D2020403101 and D2019403041)+2 种基金the Science and Technology Project of Hebei Education Department(Grant No.ZD2020134)the National Natural Science Foundation of China(Grant Nos.41702094 and 41672070)the Science and Technology Innovation Team Project of Hebei GEO University(Grant No.KJCXTD-2021-02)。
文摘To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.
基金financially supported by the Scientific Research Project Coordination of Konya Technical University(Grant No.211007014)。
文摘The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jurassic-Early Cretaceous high-K calc-alkaline intrusive rocks.The Cu-Au mineralization is commonly related to quartz-sericite-chlorite alteration dominantly composed of chalcopyrite,gold,sphalerite,pyrite,bornite,hematite,covellite,chalcocite,malachite,and azurite.The Goshgarchay copper-gold deposit,which is 600 m wide and approximately 1.2 km long,is seen as a faultcontrolled and vein-,stockwork-and disseminated type deposit.The Goshgarchay Cu-Au deposit predominantly comprises Cu(max.64500 ppm)and Au(max.11.3 ppm),while it comprises relatively less amounts Zn(max.437 ppm),Mo(max.47.5 ppm),Pb(max.134 ppm),and Ag(max.21 ppm).The homogenization temperatures and salinities of fluid inclusions in quartz for stage Ⅰ range from 380℃ to 327℃,and 6.9 wt% to 2.6 wt% NaCl eq.,respectively.Thand salinities in quartz for stage Ⅱ range from 304℃ to 253℃,and 7.6 wt% to 3.2 wt% NaCl eq.,respectively.The calculated δ^(34)S_(h2s)values(-1.5‰ to 5.5‰)of sulfides and especially the narrow range of δ^(34)S_(h2s) values of chalcopyrite and bornite(between -0.07‰ and +0.7‰)indicate that the source of the Goshgarchay Cu-Au mineralization is magmatic.Based on the mineralogical,geochemical,fluid inclusion,and sulfur isotopic data,the Goshgarchay Cu-Au deposit represents a late stage peripheral magmatic-hydrothermal mineralization probably underlain by a concealed porphyry deposit.
基金financially supported by National Natural Science Foundation of China(42272106,41202067)Open Fund of State Key Laboratory for Mineral Deposits Research,Nanjing University(2019-LAMD-K12)China Geological Survey(DD20211386,DD20211392,DD20179603).
文摘The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.
基金Supported by PetroChina Science and Technology Development Project(2023ZZ0206,2021DJ0303,2021DJ0105,2021DJ0203)National Natural ScienceFoundation of China(U22B6002).
文摘The complexity of diagenesis and hydrocarbon accumulation in the deep reservoirs in southern Junggar Basin restricts hydrocarbon exploration in the lower reservoir assemblage. The lithofacies and diagenesis of reservoirs in the Cretaceous Qingshuihe Formation in the Gaoquan structure of the Sikeshu Sag, southern Junggar Basin were analyzed. On this basis, the thermal history was calibrated using calcite in-situ U-Pb dating and fluid inclusion analysis to depict the hydrocarbon accumulation process in the Gaoquan structure. The results show that the Qingshuihe reservoir experienced two phases of calcite cementation and three phases of hydrocarbon charging. The calcite cements are dated to be (122.1±6.4) Ma, (14.4±1.0) Ma - (14.2±0.3) Ma. The hydrocarbon charging events occurred at around 14.2-30.0 Ma (low-mature oil), 14.2 Ma (mature oil), and 2 Ma (high-mature gas). The latter two phases of hydrocarbon charging contributed dominantly to the formation of reservoir. Due to the S-N compressive thrust activity during the late Himalayan period since 2 Ma, the traps in the Gaoquan structure were reshaped, especially the effective traps which developed in the main reservoir-forming period were decreased significantly in scale, resulting in weak hydrocarbon shows in the middle-lower part of the structure. This indicates that the effective traps in key reservoir-forming period controlled hydrocarbon enrichment and distribution in the lower reservoir assemblage. Calcite U-Pb dating combined with fluid inclusion analysis can help effectively describe the complex diagenesis and hydrocarbon accumulation process in the central-west part of the basin.
基金Supported by projects of Fundamental Research Funds for Chinese Academy of Geological Sciences(No.JKYQN202338,No.DZLXJK202208)National Natural Science Foundation of China(No.41802158)the China Geological Survey(No.DD20230023).
文摘In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.
文摘The Mokama granites are located in the Kibara belt (KIB) and hosts tin oxide group minerals (TOGM: Sn-W), and sulfide group minerals (SGM: Cu-Zn-Fe-As). The essential of Cu mineralization (non-economic deposit) is disseminated inside the rock and consists of minerals (Raman, EPMA and metallographic microscopy) including chalcopyrite and bornite that are replaced by chalcocite and covellite, and the last also replaced later by malachite. The chemistry (XRF, LA-ICP-MS) of these peraluminous S-type leucogranites show SiO<sub>2</sub> (71 wt% - 79 wt%), ASI (1.4 - 3.1 molar), and are enriched in Rb (681 - 1000 ppm), Ta (12–151 ppm), Sn (43 - 142 ppm), Cu (10 - 4300 ppm), Zn (60 - 740 ppm), U (2.2 - 20.7 ppm) while depleted in Zr (20 - 31 ppm), Sr (20 - 69 ppm), Hf (1.3 - 2.0 ppm), Th (2.2 - 18.9 ppm), W (9 - 113 ppm), Pb (5 - 50 ppm), Ge (5 - 10 ppm), Cs (21 - 53 ppm) and Bi (0.6 - 17.4 ppm) and low ratios of (La/Yb) N, (Gd/Yb) N, (La/Sm) N). Fluid inclusion assemblages (FIAs) hosted in quartz in the Mokama granites show ranges of salinities of 4 - 23 wt% (NaCl equivalent) and homogenization temperatures (Th) of 190°C - 550°C. A boiling assemblage in the granite suggests a fluid phase separation occurred at about 380 - 610 bars, and this corresponds to apparent paleodepths of approximately 1 - 2 km (lithostatic model) or 3 - 5 km (hydrostatic model). FIAs hosted in TOGM such as cassiterite (salinities of 2 wt% - 10 wt% and Th of 220°C - 340°C) helped set up the possible temperature limit of SGM (Cu sulfide) precipitations that are estimated below 200°C.
文摘Fluid inclusion signal strength and visual inclusion abundance are generally lower along migration pathways than in charged reservoirs from the same area. A zone that displays strong fluid inclusion stratigraphy (FIS) hydrocarbon indications and high visualized petroleum inclusion abundance, indicates paleo-charge or in some cases a migration pathway, e.g, where inclusion abundance is enhanced by extensive microfracturing. In this study, fluid inclusion data are interpreted in seven offshore wells of the Lamu Basin to enhance the understanding of hydrocarbon generation, migration and migration pathways. The study also examines the interrelationship among rock texture, rock composition and trapped fluid distribution in the study area. The studies were based on FIS analyzed data courtesy of Fluid Inclusion Technologies (FIT) Inc. in USA laboratories. FIT conducted analysis on 391 samples from the Paleocene to Upper Jurassic (Kiboko-1 well), 249 from the Paleoecene to Campanian (Kubwa-1 well), 106 from the Maastrichtian to Turonian (Mbawa-1 well), 59 from the Eocene to Campanian (Pomboo-1 well), 26 form the Lower Eocene to Maastrichtian (Simba-1 well), 16 from the Eocene to Maastrichtian (Kipini-1 well) and 11 from the Maastrichtian to Campanian (Kofia-1 well). It also made analysis on sidewall core sample plates, with 44 from the Maastrichtian to Campanian (Kubwa-1 well), 108 from the Campanian to Upper Jurassic (Kiboko-1 well) and 8 from the Campanian (Pomboo-1 well) for petrographic evaluation. For photomicroscopy, thin sections were examined under a petrographic microscope using Ultra Violet (UV) fluorescence and microthermometry, in order to verify the presence of petroleum bearing inclusions in the rock samples and to explore textural relationships that may yield additional information on the timing of hydrocarbon migration or generation. Gas shows in Mbawa-1 well is a result of generated hydrocarbons from the carbonate interbeds in the Upper Cretaceous. Gas shows are pockets trapped in the thin carbonate rich beds. There is low abundance of upper-low, moderate and upper-moderate gravity liquid petroleum inclusions in Kubwa-1 well (central deep offshore). The low abundance suggests migration events rather than paleo-accumulations, possibly involving several discrete charges. Despite sufficient vitrinite reflectance and total organic carbon (TOC) content, the temperatures are still insufficient for hydrocarbon generation in the southern deep offshore in the region where Kiboko-1 well is located. There is no sufficient evidence for access to mature source rocks in the deep offshore basin.
基金supported by the Central Public Welfare Scientific Research Basic Scientific Research Business Expenses(Grant Nos.KK2005,KY1603)National Natural Science Foundation of China(Grant No.U20A2092)+1 种基金the National Basic Research Program of China(973 Program)(Grant No.2011CB403007)the China Geological Survey(Grant No.DD20190606)。
文摘Deep-seated potassium-rich brines were identified in the Jiangling Basin,South China.Although magmatichydrothermal sources have been proposed,the relationship between brine-type potash mineralization and volcanism remains unclear.In this study,U-Pb geochronology,geochemistry,fluid inclusion and C-O isotopic compositions of hydrothermal vein minerals in the Jiangling Basin are examined.Laser ablation U-Pb dating of calcite veins indicates that the ages are slightly younger than the formation age of the Balingshan basalt.Fluid inclusions in hydrothermal minerals show medium–low homogenization temperatures(160–220℃)and low salinities(0.14 to 4.9 wt%NaCl eqv.)and densities(0.882–0.944 g/cm^(3)).The liquid compositions of fluid inclusions in calcite veins from sedimentary strata have higher contents of potassium,compared with those from basalt.The coupled negativeδ^(13)CPDB(-10.3‰to-8.0‰)and positiveδ^(18)OSMOW(17.4‰to 20.7‰)values imply that calcite precipitation resulted from CO_(2)degassing of the basaltic magmatic fluids,as indicated by the gas composition of these inclusions in hydrothermal minerals.Rare earth element patterns indicate that water-rock interaction between hydrothermal fluids and sedimentary wall rocks contributed to the calcite precipitation in sedimentary strata.It is proposed that high-temperature water-rock interaction between magmatic fluids and sedimentary strata resulted in the potassium enrichment in fluids,interpreted as one of the sources of potassium-rich brines in the Jiangling Basin.
文摘We studied the fluid inclusions of the Jiguanshan Mo deposit in China,which is a large porphyry deposit located in the southern Xilamulun Metallogenic Belt.The irregular Mo ore body with various types of hydrothermal veinlets is hosted by Late Jurassic granite porphyry.Intense hydrothermal alterations in the deposit from the core to margin are silicification-potassium feldspar alteration,pyrite-quartz-sericite-fluorite alteration,and propylitic alteration.Based on the mineral assemblages and crosscutting relationships of ore veins,the ore-forming process were divided into three stages and two substages:quartz-pyrite veins(stage I)associated with potassic alteration;quartz-molybdenite-chalcopyrite-pyrite veins(substage Ⅱ-1)and quartz-molybdenite-fluorite veins(substage Ⅱ-2)associated with phyllic alteration;and fluorite-quartz-carbonate veins(stage Ⅲ)with carbonation.Five majorfluid inclusions(FIs)types were distinguished in the quartz associated with oxide and sulfide minerals,i.e.polyphase brine(Pb-type),opaque-bearing brine(Ob-type),solid halite(S-type),two-phase aqueous(A-type),and vapor(Vtype)inclusions.The FIs of stage I were composed of liquid-rich S-,A-,and V-type FIs with homogenization temperatures and salinities of 490 to 511℃ and 8.9 to 56.0 wt%NaCl equiv.,respectively.The FIs of substage Ⅱ-1 are composed of Pb-,Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 352 to 460℃ and 3.7 to 46.1 wt%NaCl equiv,respectively.The FIs of substage Ⅱ-2 are Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 234 to309°C and 3.7 to 39.2 wt%NaCl equiv,respectively.The FIs of stage Ⅲ are A-type FIs with homogenization temperatures and salinities of 136 to 172℃ and 1.1 to 8.9 wt%NaCl equiv,respectively.Fluid boiling,which resulted in the precipitation of sulfides,occurred in stages I andⅡ.The initial ore-forming fluids of the Jiguanshan deposit had high temperature,high salinity,and belonged to an F-rich NaCl±KCl-H2O system.The fluids gradually evolved to low temperature,low salinity,and belonged to a NaCl-H2O system.Studies of the hydrogen and oxygen isotope compositions of quartz(δ^18OH2O=-7.3 to 6.3%,δDH2O=-104.3 to-83.3%)show that the ore-formingfluids gradually evolved from magmatic water to meteoric water.
基金jointly supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant no.XDA20070304)the China Geological Survey(DD20160024 and grant no.121201102000150011)+1 种基金the China Postdoctoral Science Foundation funded project(Grant no.2016M590119)the National Natural Science Foundation of China(Grant no.41320104004,41602084)
文摘The Dayingezhuang gold deposit,hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China,contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone.The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type(i.e.,disseminated and veinlet)mineralization.Mineralization and alteration are structurally controlled by the NE-to NNE-striking Linglong detachment fault.The mineralization can be divided into four stages:(K-feldspar)–pyrite–sericite–quartz,quartz–gold–pyrite,quartz–gold–polymetallic sulfide,and quartz–carbonate,with the majority of the gold being produced in the second and third stages.Based on a combination of petrography,microthermometry,and laser Raman spectroscopy,three types of fluid inclusion were identified in the vein minerals:NaCl–H2 O(A-type),CO2–H2 O–NaCl(AC-type),and pure CO2(PC-type).Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions,with rare PC-type inclusions.These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt%NaCl equivalent.Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions,with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt%NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt%NaCl equivalent for the third stage.In contrast,quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions,with minor occurrences of AC-type inclusions;these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt%NaCl equivalent.Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and f O2 in the early stages,to Au(HS)2–under neutral-pH conditions at lower temperatures and f O2 in the later stages.The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.
基金carried out within the framework of the“Central Anatolian Fluorite Research Project”supported by General Directorate of Mineral Research and Exploration(MTA).
文摘Fluorite mineralization occurs along fractures and cracks of Middle Eocene and Pliocene limestones and marls in the north and northeast of the P?hrenk region (?i?ekdagi, Kirsehir). Tb/Ca ( Tb/La and Y/Ho ratios were obtained from REE contents of fluorites which have revealed that mineralization is of hydrothermal type. Negative Ce anomalies and positive Eu anomalies reflect that hydrothermal solutions once had high oxygen fugacity. Fluid inclusion studies indicate that homogenization temperatures of mineralization varied between 90oC and 200oC, and hydrothermal solutions are composed of NaCl + KCl + MgCl2 + H2O. In addition, salinity measurements show that hydrothermal solutions were mixed with meteoric or rock formation water. Geologic setting, REE geochemistry and fluid inclusion studies suggest that mineralization was deposited from a solution generated by mixing of magmatic and meteoric water under epithermal conditions.
基金financially supported by the National Natural Science Foundation of China(Grant No.41372098)。
文摘The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range(NE China)consists of quartzsulfide vein-type and breccia-type mineralization,related to granite porphyry.Hydrothermal alteration is well-developed and includes potassic-silicic-sericitic alteration,phyllic alteration and propylitic alteration.Three stages of mineralization are recognized on the basis of field evidence and petrographic observation,demarcated by assemblages of quartz-pyritearsenopyrite(early stage),quartz-polymetallic sulfide(intermediate stage)and quartz-carbonate-pyrite(late stage).Zircon LA-ICP-MS U-Pb dating indicates that the granite porphyry was emplaced at 146.7±1.2 Ma(Late Jurassic).Microthermometry and laser Raman spectroscopy shows that ore minerals were deposited in conditions of intermediate temperatures(175-359℃),low salinity(0.5-9.3 wt% Na Cl eqv.)and low density(0.60-0.91 g/cm^(3)).Ore-forming fluids were derived largely from magmatic hydrothermal processes,with late-stage addition of meteoric water,belonging to a H_(2)O-NaCl-CO_(2)±CH_(4) system.The δ^(34)SV-CDT values range from 0.75‰ to 4.70‰.The ^(206)Pb/^(204)Pb,^(207)Pb/^(204)Pb,and ^(208)Pb/^(204)Pb values of the ore minerals are in the ranges of 18.240-18.371,15.542-15.570,and 38.100-38.178,respectively.Data for the S and Pb isotopic systems indicate that the ore-forming metals and sulfur were derived from Mesozoic magma.Based on the geological characteristics and geochemical signatures documented in this study,we conclude that the Dongjun deposit is a mesothermal magmatic hydrothermal vein-type Pb-Zn-Ag deposit controlled by fractures and related to granite porphyry,in response to Late Jurassic tectonic-magmatic-hydrothermal activity.We further conclude that fluid immiscibility,fluid mixing and fluid-rock interactions were the dominant mechanisms for deposition of the ore-forming materials.
基金funded by the NSF of China(No.42072104,41502093)the National Key R&D Plan of China(Grant Nos.2016YFC0600108,2018YFC0603804)。
文摘The large tonnage Maoling gold deposit(25 t@3.2 g/t)is located in the southwest Liaodong Peninsula,North China Craton.The deposit is hosted in the Paleoproterozoic metamorphic rocks.Four stages of mineralization were identified in the deposit:(stageⅠ)quartz-arsenopyrite±pyrite,(stageⅡ)quartz-goldarsenopyrite-pyrrhotite,(stageⅢ)quartz-gold-polymetallic sulfide,and(stageⅣ)quartz-calcitepyrrhotite.In this paper,we present fluid inclusion,C-H-O-S-Pb-He-Ar isotope data,zircon U-Pb,and gold-bearing sulfide(i.e.arsenopyrite and pyrrhotite)Rb-Sr age of the Maoling gold deposit to constrain its genesis and ore-forming mechanism.Three types of fluid inclusions were distinguished in quartzbearing veins,including liquid-rich two-phase(WL type),gas-rich two-phase(GL type),and daughter mineral-bearing fluid inclusions(S type).Fluid inclusions data show that the homogenization at temperatures 197 to 372°C for stageⅠ,126 to 319°C for stageⅡ,119 to 189°C for stageⅢ,and 115 to 183°C for stageⅣ,with corresponding salinities of 3.7 to 22.6 wt.%,4.7 to 23.2 wt.%,5.3 to 23.2 wt.%,and 1.7 to14.9 wt.%Na Cl equiv.,respectively.Fluid boiling was the critical factor controlling the gold and associated sulfide precipitation at Maoling.Hydrogen and oxygen stable isotopic analyses for quartz yielded δ^(18)O=-5.0‰ to 9.8‰ and δD=-133.5‰ to-77.0‰.Carbon stable isotopic analyses for calcite and ankerite yielded δ^(13)C=-2.3‰to-1.2‰ and O=7.9‰ to 14.1‰.The C-H-O isotope data show that the oreforming fluids were originated from magmatic water with meteoric water input during mineralization.Hydrothermal inclusions in arsenopyrite have ^(3)He/^(4)He ratios of 0.002 Ra to 0.054 Ra,and ^(40)Ar/^(36)Ar rations of 1225 to 3930,indicating that the ore-forming fluids were dominantly derived from crustal sources almost no mantle input.Sulfur isotopic values of Maoling fine-grained granite range from6.‰1 to 9.8‰,with a mean of 7.7‰,δ^(34)S values of arsenopyrite from the mineralized phyllite(host rock)range from 8.9‰ to 10.6‰,with a mean of 10.0‰,by contrast,δ^(34)S values of sulfides from ore vary between 4.3‰and 10.6‰,with a mean of 6.8‰,suggesting that sulfur was mainly originated from both the host rock and magma.Lead radioactive isotopic analyses for sulfides yielded^(206)Pb/^(204)Pb=15.830–17.103,^(207)Pb/^(204)Pb=13.397–15.548,^(208)Pb/^(204)Pb=35.478–36.683,and for Maoling fine-grained granite yielded ^(206)Pb/^(204)Pb=18.757–19.053,^(207)Pb/^(204)Pb=15.596–15.612,and ^(208)Pb/^(204)Pb=38.184–39.309,also suggesting that the ore-forming materials were mainly originated from the host rocks and magma.Zircon U-Pb dating demonstrates that the Maoling fine-grained granite was emplaced at 192.7±1.8 Ma,and the host rock(mineralized phyllite)was emplaced at some time after2065.0±27.0 Ma.Arsenopyrite and pyrrhotite give Rb–Sr isochron age of 188.7±4.5 Ma,indicating that both magmatism and mineralization occurred during the Early Jurassic.Geochronological and geochemical data,together with the regional geological history,indicate that Early Jurassic magmatism and mineralization of the Maoling gold deposit occurred during the subducting Paleo-Pacific Plate beneath Eurasia,and the Maoling gold deposit is of the intrusion-related gold deposit type.
基金This study was supported by the National Natural Science Foundation of China (Grant No.41902065, 41772197)Open Reserch Fund from the State Key Laboratory Breeding base of Nuclear Resources and environment (Grant NRE1803)+1 种基金the Chongqing Science and Technology Innovation Project (Zhu Zhengjie)the Major State Basic Research Development Program (No.2011CB40300)
文摘Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-rich brine. However, no soluble potassium salt deposit were found. In this study, the halite in well Changping 3 which is located at the eastern part of the Sichuan basin was studied using the characteristics, hydrogen and oxygen isotopes of the fluid inclusion in halite to reconstruct the paleoenvironment. The salt rocks in well Changping 3 can be divided into two types: grey salt rock and orange salt rock. The result shows that the isotopic composition of the halite fluid inclusion is distinct from the global precipitation line reflecting that the salt formation process is under strong evaporation conditions and the climate is extremely dry. At the same time, compared with the hydrogen and oxygen isotopes of brine in the Sichuan Basin and the hydrous isotope composition of the inclusions in the salt inclusions of other areas in China, it is shown that the evaporation depth of the ancient seawater in the Sichuan Basin was high and reached the precipitation of potassium and magnesium stage.
基金This research was supported by selfdetermined foundation of MNR Key Laboratory of Mineral Resources Evaluation in Northeast Asia(No.DBY-ZZ-18-12).
文摘The Budunhua Cu deposit is located in the Tuquan ore-concentrated area of the southern Great Xing’an Range,NE China.This deposit includes the southern Jinjiling and northern Kongqueshan ore blocks,separated by the Budunhua granitic pluton.Cu mineralization occurs mainly as stockworks or veins in the outer contact zone between tonalite porphyry and Permian metasandstone.The ore-forming process can be divided into four stages involving stage Ⅰ quartz-pyrite-arsenopyrite;stage Ⅱ quartz-pyrite-chalcopyrite-pyrrhotite;stage Ⅲ quartz--polynetallic sulfides;and stage IV quartz-calcite.Three types of fluid inclusions(FIs) can be distinguished in the Budunhua deposit:liquid-rich two-phase aqueous FIs(L-type),vapour-rich aqueous FIs(V-type),and daughter mineral-bearing multi-phase FIs(S-type).Quartz of stages Ⅰ-Ⅲ contains all types of FIs,whereas only L-type FIs are evident in stage Ⅳ veins.The coexisting V-and S-type FIs of stages Ⅰ-Ⅲ have similar homogenization temperatures but contrasting salinities,which indicates that fluid boiling occurred.The FIs of stages Ⅰ,Ⅱ,Ⅲ,and Ⅳyield homogenization temperatures of 265-396℃,245-350℃,200-300℃,and 90-228℃ with salinities of3.4-44.3 wt.%,2.9-40.2 wt.%,1.4-38.2 wt.%,and 0.9-9.2 wt.% NaCl eqv.,respectively.Ore-forming fluids of the Budunhua deposit are characterized by high temperatures,moderate salinities,and relatively oxidizing conditions typical of an H2 O-NaCl fluid system.Mineralization in the Budunhua deposit occurred at a depth of0.3-1.5 km,with fluid boiling and mixing likely being responsible for ore precipitation.C-H-O-S-Pb isotope studies indicate a predominantly magmatic origin for the ore-forming fluids and materials.LA-ICP-MS zircon U-Pb analyses indicate that ore-forming tonalite porphyry and post-ore dioritic porphyrite were formed at 151.1±1.1 Ma and 129.9±1.9 Ma,respectively.Geochemical data imply that the primary magma of the tonalite porphyry formed through partial melting of Neoproterozoic lower crust.On the basis of available evidence,we suggest that the Budunhua deposit is a porphyry ore system that is spatially,temporally,and genetically associated with tonalite porphyry and formed in a post-collision extensional setting following closure of the Mongol-Okhotsk Ocean.
文摘Ali Javad porphyry copper-gold deposit is located in Arasbaran porphyry copper belt at northwestern Iran, some 20 km east of Sungun Mine. Porphyry mineralization at the Ali Javad deposit occurred in post-Oligocene quartz monzonite bodies which intruded in the Eocene volcanic rocks. Mineralization occurred as veins, veinlets and dissemination both as hypogene and supergene type. Several types of veinlets were distinguished during the study of the deposit. Fluid inclusion studies on fluids trapped in quartz which were taken from drill core samples indicated a wide range of homogenization temperature in the veinlets from 138°C to 565°C which their salinity demonstrated 33 - 61 wt% NaCl equivalent. Mineralizing fluids density at the deposit was 0.8 - 1.2 g/cm<sup>3</sup>. Fluid inclusion studies suggested that Ali Javad deposit is an Au-rich porphyry copper deposit;its fluid inclusion features were comparable with other porphyry deposits.
文摘In the Kenticha area,a series of barren to rare metal-bearing pegmatites intruded into the Neoproterozoic Adola Belt.The pegmatites host world-class Nb and Ta deposits and significant Li and Be reserves.In this contribution,fluid inclusion data and feldspar geothermometry have been combined to define the crystallization condition of the Kenticha rare-metal pegmatite.Primary and complex assemblages of secondary fluid inclusions representing episodic fluid circulations have been identified in quartz and spodumene.A primary aqueous-carbonic fluid of low salinity aqueous solution with liquid and vapour CO_(2) phases,secondary carbonic fluid rich and carboniconly fluids,and multiple generations of secondary aqueous inclusions that represent sub-solidus hydrothermal circulation have been identified.All aqueous inclusions were homogenized into the liquid phase between 100 and 290℃.Aqueous-carbonic inclusions were homogenized,usually via a critical transition[T_(h)(LV→SCF)]between 241 and 397℃,or less commonly,via a dew-point transition[T_(h)(LV→V)]between 213 and 264℃.Crystallization of the rare-element pegmatite is certainly associated with the late-stage magmatic or early hydrothermal low-salinity aqueous-carbonic fluid that homogenizes to critical conditions.A combination of microthermometric data and existing experimentally determined solidus from flux and volatile bearing haplogranite suggests exsolution of fluids from hydrous silicate melt,perhaps during crystallization of the aplitic layer.The fluids were then trapped and isobarically cooled along a reasonable geothermal gradient within the pegmatite unit down to a temperature of around 397℃.
基金This work was supported by the National Natural Science Foundation of China(41873070,U1762108 and 41172111).
文摘Trapped ancient microorganisms in halite fluid inclusions are of special interest to the understanding of biology and ecology in salt lake systems.With the integration of petrologic,microthermometric,and Raman spectroscopic analyses,this study utilizes fluid inclusions from Chaka Salt Lake,eastern Qaidam Basin,NW China,to assess the possibility of microorganism-trapping by fluid inclusions.Here,we report that the solid phase of some primary fluid inclusions contains carotenoids,which is interpreted as evidence of Dunaliella algae,and that the coexisting liquid phase comprises SO_(4)^(2-).The homogenization temperatures of single-phase primary fluid inclusions indicate that the precipitation temperature of the Holocene halite in Chaka Salt Lake ranges from 13.5℃ to 36.4℃.This suggests that fluid inclusions in halite are a good medium for trapping and preserving ancient microorganisms and organic matter in salt lakes,and that Raman spectroscopy has good potential to identify halophilic archaea.
基金supported by the Science Foundation for Outstanding Young Scholars (41822304)the Zhejiang Provincial Natural Science Foundation (LZ16D060001)。
文摘The Piaotang deposit is one of the largest vein-type W-polymetallic deposits in southern Jiangxi Province,South China.The coexistence of wolframite and cassiterite is an important feature of the deposit.Based on detailed petrographic observations,microthermometry of fluid inclusions in wolframite,cassiterite and intergrown quartz was undertaken.The inclusions in wolframite were observed by infrared microscope,while those in cassiterite and quartz were observed in visible light.The fluid inclusions in wolframite can be divided into two types:aqueous inclusions with a large vapor-phase proportion and aqueous inclusions with a small vapor-phase ratio.The homogenization temperature(Th)of inclusions in wolframite with large vapor-phase ratios ranged from 280℃ to 390℃,with salinity ranging from 3.1 to 7.2 wt%NaCl eq.In contrast,the Th values of inclusions with small vapor-phase ratios ranged from 216℃ to 264℃,with salinity values ranging from 3.5 to 9.3 wt%NaCl eq.T_(h) values of primary inclusions in cassiterite ranged from 316℃ to 380℃,with salinity ranging from 5.4 to 9.3 wt%NaCl eq.T_(h) values for primary fluid inclusions in quartz ranged from 162℃ to 309℃,with salinity values ranging from 1.2 to 6.7 wt%NaCl eq.The results show that the formation conditions of wolframite,cassiterite and intergrown quartz are not uniform.The evolutionary processes of fluids related to these three kinds of minerals are also significantly different.Intergrown quartz cannot provide the depositional conditions of wolframite and cassiterite.The fluids related to tungsten mineralization for the NaCl-H_(2)O system had a medium-to-high temperature and low salinity,while the fluids related to tin mineralization for the NaCl-H_(2)O system had a high temperature and medium-to-low salinity.The results of this study suggest that fluid cooling is the main mechanism for the precipitation of tungsten and tin.
