期刊文献+
共找到36,435篇文章
< 1 2 250 >
每页显示 20 50 100
Corrosion and in vitro cytocompatibility investigation on the designed Mg-Zn-Ag metallic glasses for biomedical application 被引量:1
1
作者 Jian Wang Lingzhong Meng +6 位作者 Weixin Xie Chen Ji Ronghua Wang Pinghu Zhang Liling Jin Liyuan Sheng Yufeng Zheng 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第4期1566-1580,共15页
In the present work,seven Mg-Zn-Ag alloys with the nominal composition of Mg_(96-x)Zn_(x)Ag_(4)(x=17,20,23,26,29,32,35 in at.%)were prepared by induction melting and single-roller melt-spinning.The X-ray diffraction(X... In the present work,seven Mg-Zn-Ag alloys with the nominal composition of Mg_(96-x)Zn_(x)Ag_(4)(x=17,20,23,26,29,32,35 in at.%)were prepared by induction melting and single-roller melt-spinning.The X-ray diffraction(XRD)analyses indicate the metallic glasses with three composition of Mg_(73)Zn_(23)Ag_(4),Mg_(70)Zn_(26)Ag_(4),and Mg_(67)Zn_(29)Ag_(4)were obtained successfully.The differential scanning calorimetry(DSC)measurement was used to obtain the characteristic temperature of Mg-Zn-Ag metallic glasses for the glass-forming ability analysis.The maximum glass transition temperature(Trg)was found to be 0.525 with a composition close to Mg_(67)Zn_(29)Ag_(4),which results in the best glass-forming ability.Moreover,the immersion test in simulated body fluid(SBF)demonstrate the relative homogeneous corrosion behavior of the Mg-Zn-Ag metallic glasses.The corrosion rate of Mg-Zn-Ag metallic glasses in SBF solution decreases with the increase of Zn content.The sample Mg_(67)Zn_(29)Ag_(4)has the lowest corrosion rate of 0.19mm/yr,which could meet the clinical application requirement well.The in vitro cell experiments show that the Madin-Darby canine kidney(MDCK)cells cultured in sample Mg_(67)Zn_(29)Ag_(4)and its extraction medium have higher activity.However,the Mg-Zn-Ag metallic glasses exhibit obvious inhibitory effect on human rhabdomyosarcoma(RD)tumor cells.The present investigations on the glass-forming ability,corrosion behavior,cytocompatibility and tumor inhibition function of the Mg-Zn-Ag based metallic glass could reveal their biomedical application possibility. 展开更多
关键词 Metallic glasses Mg-Zn-Ag Corrosion behavior In vitro cytocompatibility
下载PDF
A tantalum-containing zirconium-based metallic glass with superior endosseous implant relevant properties 被引量:1
2
作者 Yunshu Wu Feifei Wang +6 位作者 Yao Huang Fu Zheng Yuhao Zeng Zhen Lu Songlin Wang Baoan Sun Yuchun Sun 《Bioactive Materials》 SCIE CSCD 2024年第9期25-40,共16页
Zirconium-based metallic glasses(Zr-MGs)are demonstrated to exhibit high mechanical strength,low elastic modulus and excellent biocompatibility,making them promising materials for endosseous implants.Meanwhile,tantalu... Zirconium-based metallic glasses(Zr-MGs)are demonstrated to exhibit high mechanical strength,low elastic modulus and excellent biocompatibility,making them promising materials for endosseous implants.Meanwhile,tantalum(Ta)is also well known for its ideal corrosion resistance and biological effects.However,the metal has an elastic modulus as high as 186 GPa which is not comparable to the natural bone(10–30 GPa),and it also has a relative high cost.Here,to fully exploit the advantages of Ta as endosseous implants,a small amount of Ta(as low as 3 at.%)was successfully added into a Zr-MG to generate an advanced functional endosseous implant,Zr58Cu25Al14Ta3 MG,with superior comprehensive properties.Upon carefully dissecting the atomic structure and surface chemistry,the results show that amorphization of Ta enables the uniform distribution in material surface,leading to a significantly improved chemical stability and extensive material-cell contact regulation.Systematical analyses on the immunological,angiogenesis and osteogenesis capability of the material are carried out utilizing the next-generation sequencing,revealing that Zr_(58)Cu_(25)Al_(14)Ta_(3)MG can regulate angiogenesis through VEGF signaling pathway and osteogenesis via BMP signaling pathway.Animal experiment further confirms a sound osseointegration of Zr_(58)Cu_(25)Al_(14)Ta_(3)MG in achieving better bone-implant-contact and inducing faster periimplant bone formation. 展开更多
关键词 TANTALUM Zirconium-based metallic glass Surface chemistry Atomic structure Endosseous implant
原文传递
Geochemistry of volcanic glass from Mahanadi offshore region,eastern continental margin of India:Constraints on the contribution of latest Toba super-eruption
3
作者 Muralidhar Kocherla Durbar Ray +3 位作者 Manavalan Satyanarayanan Hilda Joao Virsen Gaikwad PB Ramamurty 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2024年第2期111-119,共9页
The tephra layers in multiple sediment cores from the offshore region of the Mahanadi basin in the northern Bay of Bengal were investigated for possible volcanic sources. The glass shards from those tephra layers were... The tephra layers in multiple sediment cores from the offshore region of the Mahanadi basin in the northern Bay of Bengal were investigated for possible volcanic sources. The glass shards from those tephra layers were studied for size distribution, texture, and elemental geochemistry to establish chronostratigraphic markers for regional and global Quaternary correlation. The textural features of fine-grained(silty) volcanic glasses suggest the distal source of these tephra deposits. Major element composition with elevated SiO_(2) contents ranging between75%–76% and dominance of K_(2)O(> 4.5%) over CaO(< 0.9%) suggest ashes have originated from siliceous rhyolitic melts, similar to the petrographic composition of tephra from the Toba volcano. The bulk trace element compositions of the same glass shards were comparable with those reported in the youngest Toba tephra reported elsewhere. Likewise, the LREE-dominated chondrite normalized REE profiles of tephra from the Mahanadi basin closely resemble the characteristic REE patterns in Toba ash from other parts of the Indian Ocean and thus confirmed the contribution of the youngest Toba super-eruption for this ash layers. 展开更多
关键词 Mahanadi basin Bay of Bengal volcanic glass glass morphology glass-chemistry
下载PDF
Mixed Alkali-zinc Effects on Thermo-mechanical Properties in Borosilicate Glasses
4
作者 XIAO Guanzhou TAO Yunhang +3 位作者 ZHOU Hemin ZHENG Qingshuang QIAO Ang TAO Haizheng 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第5期1093-1099,共7页
A series of mixed alkali-zinc borosilicate glasses with various r values(r=molar ratio of[ZnO]/([R^(2)O]+[ZnO]))from 0.00 to 1.00 were fabricated to probe the mixed alkali-zinc effects on thermo-mechanical properties.... A series of mixed alkali-zinc borosilicate glasses with various r values(r=molar ratio of[ZnO]/([R^(2)O]+[ZnO]))from 0.00 to 1.00 were fabricated to probe the mixed alkali-zinc effects on thermo-mechanical properties.The nonlinear evolution of glass transition temperature(T_(g))with the addition of ZnO is ascribed to the competition of two converse factors,i e,the T_(g)depression as one of the colligative properties for a solution,on the one hand,and the enhancement of T_(g)due to the higher field strength of zinc cations compared to that of alkali ions.However,the nonlinear evolution of elastic moduli and coefficients of thermal expansion with r is attributed to the variance of intermediate-range clusters,which is confirmed by infrared and Raman scattering spectra.These findings are very helpful in tailoring the performance of borosilicate glasses. 展开更多
关键词 glass transition temperature elastic moduli coefficient of thermal expansion borosilicate glass
原文传递
Preparation and Characterization of ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)System Low Melting Sealing Glasses
5
作者 HE Yifeng LI Xiuying +5 位作者 LI Chaoyuan GUO Huiming XIAO Zhuohao ZHU Shengbin DONG Hongbo FU Zhen 《陶瓷学报》 CAS 北大核心 2024年第5期931-940,共10页
Lead-free low melting glasses,ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)system,with fixed contents of 15 mol%CuO and 20 mol%Bi_(2)O_(3),were prepared by using melt cooling method.Structure and thermal properties of the gl... Lead-free low melting glasses,ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)system,with fixed contents of 15 mol%CuO and 20 mol%Bi_(2)O_(3),were prepared by using melt cooling method.Structure and thermal properties of the glasses were studied by using X-ray diffractometer(XRD),infrared spectrometer(FIT-IR),thermal dilatometer and differential thermal analyzer(DTA).Chemical durability of the glasses was studied by using dissolution rate method.Wettability of glasses on substrate was tested by using button sintering experiment.It is found that alkaline resistance of the glass solders is lower than that of plate glass and the water resistance is comparable with that of plate glass.The sealing temperatures are Ts=445-490℃,while the average thermal expansion coefficient from room temperature to 300℃is in the range of(65-82)×10^(−7)℃^(−1).At sealing temperature,the glass solders have good wettability on plate glass or alumina substrate.They are not crystallized even sintered at the sealing temperature for 30 min.The solder glasses are suitable for sealing plate glass,alumina and other inorganic non-metallic materials. 展开更多
关键词 bismuth borate glass solder glasses WETTABILITY chemical durability thermal properties
下载PDF
Solid-state NMR reveals that oxygen tri-clusters make glass highly crackresistant
6
作者 Zhiwu Yu 《Magnetic Resonance Letters》 2024年第2期77-78,共2页
In a recent paper,advanced solid-state nuclear magnetic resonance(SSNMR)technology was employed to reveal the underlying mechanism contributing to the high hardness and exceptional resistance to fragmentation observed... In a recent paper,advanced solid-state nuclear magnetic resonance(SSNMR)technology was employed to reveal the underlying mechanism contributing to the high hardness and exceptional resistance to fragmentation observed in certain special glasses[1].This study utilized SSNMR to analyze the atomic-scale internal structure of glass,enabling the quantification of the fraction of three-coordinated oxygen([^((3))O]).The research findings demonstrate a quantitative relationship between[^((3))O]and the resistance of glass to crack initiation. 展开更多
关键词 CRACK resistance glass
下载PDF
Design and characterization of biodegradable Mg-Zn-Ag metallic glasses
7
作者 Jian WANG Chen WANG +1 位作者 Wei-feng RAO In-ho JUNG 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第9期2814-2827,共14页
In order to develop the Mg-Zn-Ag metallic glasses(MGs)for biodegradable implant applications,the glass formation ability(GFA)and biocompatibility of Mg-Zn-Ag alloys were investigated using a combination of the calcula... In order to develop the Mg-Zn-Ag metallic glasses(MGs)for biodegradable implant applications,the glass formation ability(GFA)and biocompatibility of Mg-Zn-Ag alloys were investigated using a combination of the calculation of phase diagrams(CALPHAD)and experimental measurements.High GFA potentiality of two alloy series,specifically Mg_(96-x)Zn_xAg_(4)and Mg_(94-x)Zn_xAg_6(x=17,20,23,26,29,32,35),was predicted theoretically and then substantiated through experimental testing.X-ray diffraction(XRD)and differential scanning calorimetry(DSC)techniques were used to evaluate the crystallinity,GFA,and crystallization characteristics of these alloys.The results showed that compositions between Mg_(73)Zn_(23)Ag_(4)and Mg_(64)Zn_(32)Ag_(4)for Mg_(96-x)Zn_xAg_4,Mg_(66)Zn_(28)Ag_(6)and Mg_(63)Zn_(31)Ag_(6for)Mg_(94-x)Zn_xAg_(6)displayed a superior GFA.Notably,the GFA of the Mg_(96-x)Zn_xAg_(4)series was better than that of the Mg_(94-x)Zn_xAg_(6)series.Furthermore,the Mg_(70)Zn_(26)Ag_4,Mg_(74)Zn_(20)Ag_6,and Mg_(71)Zn_(23)Ag_(6)alloys showed acceptable corrosion rates,good cytocompatibility,and positive effects on cell proliferation.These characteristics make them suitable for applications in medical settings,potentially materials as biodegradable implants. 展开更多
关键词 glass forming ability calculation phase diagram(CALPHAD) Mg−Zn−Ag metallic glasses CYTOCOMPATIBILITY
下载PDF
Influence of Al_(2)O_(3)/SiO_(2) Ratio on the Structure and Properties of Na^(+)/K^(+)Ion Exchange Na_(2)O-MgO-Al_(2)O_(3)-SiO_(2) Glasses
8
作者 吴建磊 CHEN Junzhu +4 位作者 TIAN Xiaokun LI Jiahao GAO Wenkai YUE Yunlong 康俊峰 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第3期606-612,共7页
In this work,the structure,viscosity and ion-exchange process of Na_(2)O-MgO-Al_(2)O_(3)-SiO_(2) glasses with different Al_(2)O_(3)/SiO_(2) molar ratios were investigated.The results showed that,with increasing Al_(2)... In this work,the structure,viscosity and ion-exchange process of Na_(2)O-MgO-Al_(2)O_(3)-SiO_(2) glasses with different Al_(2)O_(3)/SiO_(2) molar ratios were investigated.The results showed that,with increasing Al_(2)O_(3)/SiO_(2) ratio,the simple structural units Q_(1) and Q_(2) transformed into highly aggregated structural units Q_(3) and Q_(4),indicating the increase of polymerization degree of glass network.Meanwhile,the coefficient of thermal expansion decreased from 9.23×10^(-6)℃^(-1) to 8.88×10^(-6)℃^(-1).The characteristic temperatures such as melting,forming,softening and glass transition temperatures increased with the increase of Al_(2)O_(3)/SiO_(2) ratio,while the glasses working temperature range became narrow.The increasing Al_(2)O_(3)/SiO_(2) ratio and prolonging ion-exchange time enhanced the surface compressive stress(CS)and depth of stress layer(DOL).However,the increase of ion exchange temperature increased the DOL and decreased the CS affected by stress relaxation.There was a good linear relationship between stress relaxation and surface compressive stress.Chemical strengthening significantly improved the hardness of glasses,which reached the maximum value of(622.1±10)MPa for sample with Al_(2)O_(3)/SiO_(2) ratio of 0.27 after heat treated at 410℃for 2 h. 展开更多
关键词 network structure viscosity ion exchange aluminosilicate glass
原文传递
Structural color of metallic glass through picosecond laser
9
作者 Yue’e Zhang Xing Tong +3 位作者 Yuqiang Yan Shuo Cao Hai-Bo Ke Wei-Hua Wang 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第10期120-128,共9页
The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed duri... The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed during the laser and colorseparation processes in order to develop practical laser coloring applications.Due to the high oxidation sensitivity of Labasedmetallic glass,it can broaden the color range but make it more complex.Structure coloring by laser processing on thesurface of La-based metallic glass can be conducted after thermoplastic forming.It is particularly important to clarify therole of structure and composition in the surface coloring process.The aim is to study the relationship between amorphoussurface structural color,surface geometry,and oxide formation by laser processing in metallic glasses.The findings revealedthat the periodic structure primarily determines the surface color at laser energy densities below 1.0 J/mm^(2).In contrast,thesurface color predominantly depends on the proportion of oxides that are formed when energy densities exceed 1.0 J/mm^(2).Consequently,this study provides a novel concept for the fundamental investigation of laser coloring and establishes a newavenue for practical application. 展开更多
关键词 metallic glass picosecond laser periodic structure OXIDES
原文传递
“Glass-quake”in elastically loaded bulk metallic glasses
10
作者 Qi Huang Kaiguo Chen +7 位作者 Chen Liu Guisen Liu Yang Shao Chenlong Zhao Ran Chen Hengtong Bu Lingti Kong Yao Shen 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第11期367-371,共5页
Amorphous solids exhibit scale-free avalanches,even under small external loading,and thus can work as suitable systems to study critical behavior and universality classes.The abundance of scale-free avalanches in the ... Amorphous solids exhibit scale-free avalanches,even under small external loading,and thus can work as suitable systems to study critical behavior and universality classes.The abundance of scale-free avalanches in the entire elastic tension regime of bulk metallic glass(BMG)samples has been experimentally observed using acoustic emission(AE)measurements.In this work,we compare the statistics of avalanches with those of earthquakes,and find that they both follow the Gutenberg–Richter law in the statistics of energies and Omori’s law of aftershock rates,and share the same characteristics in the distribution of recurrence times.These resemblances encourage us to propose the term“glass-quake”to describe avalanches in elastically loaded BMGs.Furthermore,our work echoes the potential universality of critical behavior in disordered physical systems from atomic to planetary scales,and motivates the use of elastic loaded BMGs as valuable laboratory simulators of seismic dynamics. 展开更多
关键词 bulk metallic glass AVALANCHE EARTHQUAKE disorder system time series
原文传递
Effect of Fe_(2)O_(3)on the Structure,Physical Properties and Crystallization of CaO-Al_(2)O_(3)-SiO_(2)Glass
11
作者 张峰 XIONG Dehua +7 位作者 谢俊 张继红 HAN Jianjun CHEN Dequan WEN Zhongquan FAN Zhenhua CHEN Lina SUN Tengfei 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第4期954-961,共8页
The calcium aluminosilicate-based glasses(CaO-Al_(2)O_(3)-SiO_(2),CAS)with different Fe_(2)O_(3)content(0.10wt%,0.50wt%,0.90wt%,and 1.30wt%)were prepared by traditional melt-quenching method.The glass network structur... The calcium aluminosilicate-based glasses(CaO-Al_(2)O_(3)-SiO_(2),CAS)with different Fe_(2)O_(3)content(0.10wt%,0.50wt%,0.90wt%,and 1.30wt%)were prepared by traditional melt-quenching method.The glass network structure,thermal and mechanical properties,and crystallization behavior changes were investigated by nuclear magnetic resonance spectrometer,Fourier-transform infrared spectro-photometer,X-ray diffractometer,differential scanning calorimetry and field emission scanning electron microscope measurements.The change of Q^(n)in glass structures reveals the glass network connectivity decreases due to the increasing content of Fe_(2)O_(3)addition,resulting in the increasing of non-bridging number in glass structure.The glass densities slightly rise from 2.644 to 2.681 g/cm^(3),while Vickers’s hardness increases at first,from 6.469 to 6.901 GPa,then slightly drops to 6.745 GPa,with Fe_(2)O_(3)content increase.There is almost no thermal expansion coefficient change from different Fe_(2)O_(3)content.The glass transmittance in visible range gradually decreases with higher Fe_(2)O_(3)content,resulting from the strong absorption of Fe^(2+)and Fe^(3+)ions.The calculated activation energy from thermal analysis results first decreases from 282.70 to 231.18 kJ/mol,and then increases to 244.02 kJ/mol,with the Fe_(2)O_(3)content increasing from 0.10wt%to 1.30wt%.Meanwhile,the maximum Avrami constant of 2.33 means the CAS glasses exhibit two-dimensional crystallization.All of the CAS glass-ceramics samples contain main crystal phase of anorthite,the microstructure appears lamellar and columnar crystals. 展开更多
关键词 calcium aluminosilicate glass network structure physical properties CRYSTALLIZATION
原文传递
Provenance of colorless and brown volcanic glass in late Pleistocene tephra layers in the Western Philippine Sea
12
作者 Fuqing JIANG Zhishun ZHANG +6 位作者 Zhaohui ZHANG Guoliang ZHANG Peng HUANG Xiaojing ZHOU Zhifang XIONG Congying LI Tiegang LI 《Journal of Oceanology and Limnology》 SCIE CAS CSCD 2024年第5期1438-1449,共12页
Tephra layers in the western Philippine Sea,characterized by abundant volcanic glass shards,may provide crucial evidence on the eruption history of volcanoes and tectonic evolution of the western Pacific.A 220-ka sedi... Tephra layers in the western Philippine Sea,characterized by abundant volcanic glass shards,may provide crucial evidence on the eruption history of volcanoes and tectonic evolution of the western Pacific.A 220-ka sediment core from the Benham Rise in the western Philippine Sea offers new insights into the provenance of four intercalated tephra layers(T1–T4,in chronological order)containing either colorless or brown glass shards.Relative to primitive mantle,all glass shards are enriched in large-ion lithophile elements,such as Rb,Cs,and Pb,and depleted in high field-strength elements,such as Th,Nb,and Ta,indicating a subduction-related origin.The colorless glass shards are characterized by high SiO_(2)(>78%)and light rare earth element(LREE)contents as well as high La/Sm ratios(>9),low FeO and MgO contents(<1%),low Sr/Y(<15)and high Ba/Th ratios(>100),pointing to a rhyolitic composition and a medium-K calc-alkaline serial affinity.In contrast,the brown glass shards are characterized by lower SiO_(2)(<63%)and LREE contents,higher FeO,MgO,and CaO contents,lower La/Sm(<6)and Ba/Th(<75),and similar Sr/Y ratios(<15),indicating derivation from medium to high-K calc-alkaline andesite magma.Brown glass shards from layers T3(152 ka)and T4(172 ka)were correlated with volcanic deposits from the Taal and Laguna Caldera in the Maccolod Corridor,respectively,while the colorless glass shards from layers T1(36.5 ka)and T2(61.2 ka)were likely sourced from the Irosin Caldera in the Bicol Arc.Establishing the provenance of late Pleistocene tephra layers in the western Philippine Sea is helpful to complement a Philippine volcanic history and establish a regional tephrochronostratigraphy. 展开更多
关键词 volcanic glass PROVENANCE chemical composition Philippine Sea late Pleistocene
下载PDF
Effect of overheating-induced minor addition on Zr-based metallic glasses
13
作者 杨福 薄振兴 +7 位作者 黄瑶 王雨田 孙博阳 鲁振 孙保安 柳延辉 汪卫华 潘明祥 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第3期118-125,共8页
Melt treatment is well known to have an important influence on the properties of metallic glasses(MGs).However,for the MGs quenched from different melt temperatures with a quartz tube,the underlying physical origin re... Melt treatment is well known to have an important influence on the properties of metallic glasses(MGs).However,for the MGs quenched from different melt temperatures with a quartz tube,the underlying physical origin responsible for the variation of properties remains poorly understood.In the present work,we systematically studied the influence of melt treatment on the thermal properties of a Zr50Cu36Al14 glass-forming alloy and unveiled the microscopic origins.Specifically,we quenched the melt at different temperatures ranging from 1.1Tl to 1.5Tl(Tl is the liquidus temperature)to obtain melt-spun MG ribbons and investigated the variation of thermal properties of the MGs upon heating.We found that glass transition temperature,Tg,increases by as much as 36 K,and the supercooled liquid region disappears in the curve of differential scanning calorimetry when the melt is quenched at a high temperature up to 1.5Tl.The careful chemical analyses indicate that the change in glass transition behavior originates from the incorporation of oxygen and silicon in the molten alloys.The incorporated oxygen and silicon can both enhance the interactions between atoms,which renders the cooperative rearrangements of atoms difficult,and thus enhances the kinetic stability of the MGs. 展开更多
关键词 metallic glass thermal properties melt treatment OVERHEATING oxygen content
原文传递
The Effect of Na_(2)O/B_(2)O_(3)Composition Ratio on the Structure and Properties of Cu^(+)Doped Luminescent Glass
14
作者 LI Bohan FENG Jinyang +3 位作者 FENG Xiaoping ZHAO Xiujian WU Donghua MA Xiao 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第6期1379-1390,共12页
Cu^(+)-doped alkali borosilicate glasses with different Na_(2)O contents were prepared by the melting method,and the effects of different R values(R=Na_(2)O/B_(2)O_(3))on the structure,ion presence state and luminesce... Cu^(+)-doped alkali borosilicate glasses with different Na_(2)O contents were prepared by the melting method,and the effects of different R values(R=Na_(2)O/B_(2)O_(3))on the structure,ion presence state and luminescence properties of Cu^(+)-doped alkali borosilicate glasses were investigated.The analysis by FT-IR and Raman spectroscopy shows that,with the increase of R value of the glass,the[BO_(3)]in the structure of Cu^(+)-doped alkali borosilicate glass transforms into[BO_(4)]and the number of non-bridging oxygen in the glass network appears to be slightly increased.The absorption spectra and EPR analysis reveal that the Cu^(+)content in the glass gradually decreases and the Cu^(2+)content gradually increases as the R value of the glass increases.XPS and PL tests further indicate that the transformation of the octahedral coordination structure of Cu^(+)to the octahedral coordination structure of Cu^(2+)and the cubic coordination structure of Cu^(+)occurs in the glass as the R value of the glass increases.This transformation can effectively reduce the concentration quenching phenomenon of Cu^(+)and improve the fluorescence luminescence intensity of the glass samples.Meanwhile,the samples were found to have luminescence tunability as well as good thermal stability. 展开更多
关键词 R value glass structure Cu ion valence LUMINESCENCE
原文传递
Low-frequency hybridized excess vibrations of two-dimensional glasses
15
作者 付立存 郑一鸣 王利近 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第5期550-555,共6页
One hallmark of glasses is the existence of excess vibrational modes at low frequenciesωbeyond Debye’s prediction.Numerous studies suggest that understanding low-frequency excess vibrations could help gain insight i... One hallmark of glasses is the existence of excess vibrational modes at low frequenciesωbeyond Debye’s prediction.Numerous studies suggest that understanding low-frequency excess vibrations could help gain insight into the anomalous mechanical and thermodynamic properties of glasses.However,there is still intensive debate as to the frequency dependence of the population of low-frequency excess vibrations.In particular,excess modes could hybridize with phonon-like modes and the density of hybridized excess modes has been reported to follow D_(exc)(ω)~ω^(2)in 2D glasses with an inverse power law potential.Yet,the universality of the quadratic scaling remains unknown,since recent work suggested that interaction potentials could influence the scaling of the vibrational spectrum.Here,we extend the universality of the quadratic scaling for hybridized excess modes in 2D to glasses with potentials ranging from the purely repulsive soft-core interaction to the hard-core one with both repulsion and attraction as well as to glasses with significant differences in density or interparticle repulsion.Moreover,we observe that the number of hybridized excess modes exhibits a decrease in glasses with higher density or steeper interparticle repulsion,which is accompanied by a suppression of the strength of the sound attenuation.Our results indicate that the density bears some resemblance to the repulsive steepness of the interaction in influencing low-frequency properties. 展开更多
关键词 density of states vibrational modes sound attenuation two-dimensional glasses
原文传递
Initial therapeutic evidence of a borosilicate bioactive glass(BSG)and Fe_(3)O_(4)magnetic nanoparticle scaffold on implant-associated Staphylococcal aureus bone infection
16
作者 Ying Jin Hang Liu +14 位作者 Lei Chu Jin Yang Xiuyang Li Hang Zhou Haitao Jiang Lei Shi Jason Weeks Joshua Rainbolt Changjiang Yang Thomas Xue Haobo Pan Zhongliang Deng Chao Xie Xu Cui Youliang Ren 《Bioactive Materials》 SCIE CSCD 2024年第10期148-167,共20页
Implant-associated Staphylococcus aureus(S.aureus)osteomyelitis is a severe challenge in orthopedics.While antibiotic-loaded bone cement is a standardized therapeutic approach for S.aureus osteomyelitis,it falls short... Implant-associated Staphylococcus aureus(S.aureus)osteomyelitis is a severe challenge in orthopedics.While antibiotic-loaded bone cement is a standardized therapeutic approach for S.aureus osteomyelitis,it falls short in eradicating Staphylococcus abscess communities(SACs)and bacteria within osteocyte-lacuna canalicular network(OLCN)and repairing bone defects.To address limitations,we developed a borosilicate bioactive glass(BSG)combined with ferroferric oxide(Fe_(3)O_(4))magnetic scaffold to enhance antibacterial efficacy and bone repair capabilities.We conducted comprehensive assessments of the osteoinductive,immunomodulatory,antibacterial properties,and thermal response of this scaffold,with or without an alternating magnetic field(AMF).Utilizing a well-established implant-related S.aureus tibial infection rabbit model,we evaluated its antibacterial performance in vivo.RNA transcriptome sequencing demonstrated that BSG+5%Fe_(3)O_(4)enhanced the immune response to bacteria and promoted osteogenic differentiation and mineralization of MSCs.Notably,BSG+5%Fe_(3)O_(4)upregulated gene expression of NOD-like receptor and TNF pathway in MSCs,alongside increased the expression of osteogenic factors(RUNX2,ALP and OCN)in vitro.Flow cytometry on macrophage exhibited a polarization effect towards M2,accompanied by upregulation of anti-inflammatory genes(TGF-β1 and IL-1Ra)and downregulation of pro-inflammatory genes(IL-6 and IL-1β)among macrophages.In vivo CT imaging revealed the absence of osteolysis and periosteal response in rabbits treated with BSG+5%Fe_(3)O_(4)+AMF at 42 days.Histological analysis indicated complete controls of SACs and bacteria within OLCN by day 42,along with new bone formation,signifying effective control of S.aureus osteomyelitis.Further investigations will focus on the in vivo biosafety and biological mechanism of this scaffold within infectious microenvironment. 展开更多
关键词 OSTEOMYELITIS Staphylococcus aureus BIOFILM Borosilicate bioactive glass Magnetic nanoparticles
原文传递
Unveiling the early stage evolution of local atomic structures in the crystallization process of a metallic glass
17
作者 马琳 杨晓东 +2 位作者 杨锋 周鑫嘉 武振伟 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第3期58-64,共7页
The early stage evolution of local atomic structures in a multicomponent metallic glass during its crystallization process has been investigated via molecular dynamics simulation.It is found that the initial thermal s... The early stage evolution of local atomic structures in a multicomponent metallic glass during its crystallization process has been investigated via molecular dynamics simulation.It is found that the initial thermal stability and earliest stage evolution of the local atomic clusters show no strong correlation with their initial short-range orders,and this leads to an observation of a novel symmetry convergence phenomenon,which can be understood as an atomic structure manifestation of the ergodicity.Furthermore,in our system we have quantitatively proved that the crucial factor for the thermal stability against crystallization exhibited by the metallic glass is not the total amount of icosahedral clusters,but the degree of global connectivity among them. 展开更多
关键词 metallic glass CRYSTALLIZATION molecular dynamics simulation local atomic clusters
原文传递
Third-order nonlinear wavelength conversion in chalcogenide glass waveguides towards mid-infrared photonics
18
作者 Fengbo Han Jiaxin Gu +7 位作者 Lu Huang Hang Wang Yali Huang Xuecheng Zhou Shaoliang Yu Zhengqian Luo Zhipeng Dong Qingyang Du 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第10期269-274,共6页
The increasing demand in spectroscopy and sensing calls for infrared(mid-IR)light sources.Here,we theoretically investigate nonlinear wavelength conversion of Ge_(28)Sb_(12)Se_(60)chalcogenide glass waveguide in the m... The increasing demand in spectroscopy and sensing calls for infrared(mid-IR)light sources.Here,we theoretically investigate nonlinear wavelength conversion of Ge_(28)Sb_(12)Se_(60)chalcogenide glass waveguide in the mid-IR spectral regime.With waveguide dispersion engineering,we predict generation of over an octave wavelength(2.8μm-5.9μm)tuning range Raman soliton self-frequency shift,over 2.5 octaves wavelength cover range supercontinuum(1.2μm-8.0μm),as well as single soliton Kerr comb generated in suspended Ge_(28)Sb_(12)Se_(60)waveguide.Our findings evidenced that Ge_(28)Sb_(12)Se_(60)chalcogenide glass waveguides can simultaneously satisfy the generation of Raman soliton self-frequency shift,supercontinuum spectrum,and Kerr frequency comb generation through dispersion engineering towards mid-IR on chip. 展开更多
关键词 chalcogenide glass Raman soliton self-frequency shift SUPERCONTINUUM soliton Kerr comb
原文传递
Coupling of quasi-localized and phonon modes in glasses at low frequency
19
作者 段军 蔡松林 +2 位作者 丁淦 戴兰宏 蒋敏强 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第5期564-571,共8页
Boson peak of glasses,a THz vibrational excess compared to Debye squared-frequency law,remains mysterious in condensed-matter physics and material science.It appears in many different kinds of glassy matters and is al... Boson peak of glasses,a THz vibrational excess compared to Debye squared-frequency law,remains mysterious in condensed-matter physics and material science.It appears in many different kinds of glassy matters and is also argued to exist in damped crystals.A consensus is that boson peak originates from the coupling of the(quasi)-localized non-phonon modes and the plane-wave-like phonon modes,but the coupling behavior is still not fully understood.In this paper,by modulating the content of localized modes and the frequencies of phonon modes,the coupling is clearly reflected in the localization and anharmonicity of low-frequency vibrational modes.The coupling enhances with increasing cooling rate and sample size.For finite sample size,phonon modes do not fully intrude into the low frequency to form a dense spectrum and they are not sufficiently coupled to the localized modes,thus there is no Debye level and boson peak is ill-defined.This suggestion remains valid in the presence of thermal motions induced by temperature,even though the anharmonicity comes into play.Our results point to the coupling of quasi-localized and phonon modes and its relation to the boson peak. 展开更多
关键词 metallic glasses low-frequency vibrational modes plane wave boson peak
原文传递
Damping properties and mechanism of aluminum matrix composites reinforced with glass cenospheres
20
作者 Kai SUN Lin WANG +5 位作者 Hang SU Jia-yi GENG Qiang ZHANG Bo MENG Zeng-yan WEI Gao-hui WU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第9期2743-2755,共13页
The damping properties were improved by preparing Al matrix composites reinforced with glass cenospheres through the pressure infiltration method.Transmission electron microscopy and scanning electron microscopy were ... The damping properties were improved by preparing Al matrix composites reinforced with glass cenospheres through the pressure infiltration method.Transmission electron microscopy and scanning electron microscopy were employed to characterize the microstructure of the composites.The low-frequency damping properties were examined by using a dynamic mechanical thermal analyzer,aiming at exploring the changing trend of damping capacity with strain,temperature,and frequency.The findings demonstrated that the damping value rose as temperature and strain increased,with a maximum value of 0.15.Additionally,the damping value decreased when the frequency increased.Dislocation damping under strain and interfacial damping under temperature served as the two primary damping mechanisms.The increase in the density of dislocation strong pinning points following heat treatment reduced the damping value,which was attributed to the heat treatment enhancement of the interfacial bonding force of the composites. 展开更多
关键词 glass cenospheres Al matrix composites MICROSTRUCTURE low-frequency damping properties
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部