Exploding foil initiator(EFI)is a kind of advanced device for initiating explosives,but its function is unstable when it comes to directly igniting pyrotechnics.To solve the problem,this research aims to reveal the ig...Exploding foil initiator(EFI)is a kind of advanced device for initiating explosives,but its function is unstable when it comes to directly igniting pyrotechnics.To solve the problem,this research aims to reveal the ignition mechanism of EFIs directly igniting pyrotechnics.An oscilloscope,a photon Doppler velocimetry,and a plasma spectrum measurement system were employed to obtain information of electric characteristics,impact pressure,and plasma temperature.The results of the electric characteristics and the impact pressure were inconsistent with ignition results.The only thing that the ignition success tests had in common was that their plasma all had a relatively long period of high-temperature duration(HTD).It eventually concludes that the ignition mechanism in this research is the microconvection heat transfer rather than the shock initiation,which differs from that of exploding foil initiators detonating explosives.Furthermore,the methods for evaluating the ignition success of semiconductor bridge initiators are not entirely applicable to the tests mentioned in this paper.The HTD is the critical parameter for judging the ignition success,and it is influenced by two factors:the late time discharge and the energy of the electric explosion.The longer time of the late time discharge and the more energy of the electric explosion,the easier it is to expand the HTD,which improves the probability of the ignition success.展开更多
High-purity copper(Cu) with excellent thermal and electrical conductivity, is crucial in modern technological applications, including heat exchangers, integrated circuits, and superconducting magnets. The current puri...High-purity copper(Cu) with excellent thermal and electrical conductivity, is crucial in modern technological applications, including heat exchangers, integrated circuits, and superconducting magnets. The current purification process is mainly based on the zone/electrolytic refining or anion exchange, however, which excessively relies on specific integrated equipment with ultra-high vacuum or chemical solution environment, and is also bothered by external contaminants and energy consumption. Here we report a simple approach to purify the Cu foils from 99.9%(3N) to 99.99%(4N) by a temperature-gradient thermal annealing technique, accompanied by the kinetic evolution of single crystallization of Cu.The success of purification mainly relies on(i) the segregation of elements with low effective distribution coefficient driven by grain-boundary movements and(ii) the high-temperature evaporation of elements with high saturated vapor pressure.The purified Cu foils display higher flexibility(elongation of 70%) and electrical conductivity(104% IACS) than that of the original commercial rolled Cu foils(elongation of 10%, electrical conductivity of ~ 100% IACS). Our results provide an effective strategy to optimize the as-produced metal medium, and therefore will facilitate the potential applications of Cu foils in precision electronic products and high-frequency printed circuit boards.展开更多
Al/Ni reactive multilayer foil(RMF)possesses excellent comprehensive properties as a promising substitute for traditional Cu bridge.A theoretical resistivity model of Al/Ni RMF was developed to guide the optimization ...Al/Ni reactive multilayer foil(RMF)possesses excellent comprehensive properties as a promising substitute for traditional Cu bridge.A theoretical resistivity model of Al/Ni RMF was developed to guide the optimization of EFIs.Al/Ni RMF with different bilayer thicknesses and bridge dimensions were prepared by MEMS technology and electrical explosion tests were carried out.According to physical and chemical reactions in bridge,the electrical explosion process was divided into 5 stages:heating of condensed bridge,vaporization and diffusion of Al layers,intermetallic combination reaction,intrinsic explosion,ionization of metal gases,which are obviously shown in measured voltage curve.Effects of interface and grain boundary scattering on the resistivity of film metal were considered.Focusing on variations of substance and state,the resistivity was developed as a function of temperature at each stage.Electrical explosion curves were calculated by this model at different bilayer thicknesses,bridge dimensions and capacitor voltages,which showed an excellent agreement with experimental ones.展开更多
Taking bump-type gas foil bearings as the research object,a deformation model of bump foil and a thin-plate finite element model of top foil were proposed.By solving Reynolds equation and energy equation,the pressure ...Taking bump-type gas foil bearings as the research object,a deformation model of bump foil and a thin-plate finite element model of top foil were proposed.By solving Reynolds equation and energy equation,the pressure distribution and the temperature distribution of gas films in foil bearings were obtained.Further,a numerical method for calculating the lubrication performance of gas foil bearings with considering the surface roughness was proposed.With a specific example,effects of the surface roughness on the bearing lubrication performance were parametrically studied.The results indicate that rougher journal surface can lead to larger fluctuation of the lubrication performance,while surface roughness of top foil has few effects on the fluctuation.Moreover,the mean values of performance parameters almost remain constant at different values of surface roughness.展开更多
Ti/Fe clad plate had attracted extensive attention because of its important application. In order to reduce the titanium layer thickness, the explosive welding of TA1 titanium foil to Q235 steel plate was carried out....Ti/Fe clad plate had attracted extensive attention because of its important application. In order to reduce the titanium layer thickness, the explosive welding of TA1 titanium foil to Q235 steel plate was carried out. The interfacial bonding performance was analyzed by micromorphology analysis and mechanical property test, and the formation process of interfacial wave and molten block in the vortex was simulated by smoothed particle hydrodynamics(SPH) method. The results showed that salt as pressure transfer layer used in explosive welding could play a good buffer effect on the collision between flyer and base layers. Regular waveforms were formed on the bonding interface, and the titanium foil/steel clad plate exhibited good welding quality and bonding property. The crest of the observed interfacial wave moved 200 μm from the beginning to the final formation, and it was important of jet on the formation of interfacial waveform. The interface was mainly bonded in the form of molten layer, and the grains near the interface were streamlined. Molten block containing intermetallic compounds and metal oxides appeared in the vortex of wave crest.展开更多
The results of a study of the electrical explosion of aluminum foils with an artificial periodic surface structure created by laser engraving are presented.Experiments were carried out on pulsed high-current generator...The results of a study of the electrical explosion of aluminum foils with an artificial periodic surface structure created by laser engraving are presented.Experiments were carried out on pulsed high-current generators BIN(270 kA,300 kV,100 ns)and KING(200 kA,40 kV,200 ns)with Al foil of thicknesses 16 and 4μm,respectively.Images of the exploded foils were recorded by point projection radiography in the radiation from hybrid X-pinches.It is found that the application of an artificial periodic structure to the foil leads to a much more uniform and well-defined periodic structure of the exploded foil.Images recorded in the UV range using a microchannel-plate-intensified detector show that the radiation from a surface-modified foil is more uniform along the entire length and width of the foil than that from a foil without modification.展开更多
The exploding foil,which is a main influence factor of exploding foil initiator(EFI),was studied to improve the utilization rate of energy in EFI.The burst currents of three bridge foils with different shapes were mea...The exploding foil,which is a main influence factor of exploding foil initiator(EFI),was studied to improve the utilization rate of energy in EFI.The burst currents of three bridge foils with different shapes were measured,and the sensitivity of initiation charge made of HNS-IV was tested by slappers.The test results show that,for O-shaped bridge foil,the burst current density is maximal,and the initiating voltage at 50% of firing probability of HNS-IV is minimal.The O-shaped bridge foil can be used to improve the utilization rate of energy in EFI and reduce the firing energy.展开更多
为了能更有效地处理含有噪音数据的数据集,提出了一个基于GDT(general distribution table)的对FOIL系统的改进方法,该方法利用GDT的思想、规则强度等概念,考虑到数据由噪音引起的不确定性.通过对FOIL系统算法的改进,能够很好地解决FOI...为了能更有效地处理含有噪音数据的数据集,提出了一个基于GDT(general distribution table)的对FOIL系统的改进方法,该方法利用GDT的思想、规则强度等概念,考虑到数据由噪音引起的不确定性.通过对FOIL系统算法的改进,能够很好地解决FOIL系统对含有噪音训练例集的学习能力,提高FOIL的学习精度.同时,通过例子阐述了该方法的实施过程,分析表明:该算法是一种新的有效地处理含有噪音数据的一阶谓词学习系统.展开更多
Vaporizing foil actuator welding(VFAW) was used for joining 2024-T3 and 7075-T6 aluminum alloy sheets, and the resulting joint microstructure was analyzed. 2024/7075 aluminum alloy pairs with suitable processing param...Vaporizing foil actuator welding(VFAW) was used for joining 2024-T3 and 7075-T6 aluminum alloy sheets, and the resulting joint microstructure was analyzed. 2024/7075 aluminum alloy pairs with suitable processing parameters can be prepared by using VFAW. Dynamic preform addresses the poor formability problem of target material and advantage of VFAW on dissimilar materials in some conditions. But with standoff sheet inserting in the flyer and target, 2024/7075 welded pairs gets the better weld strength, compared with flyer preformed method. The microstructure of the circular weld area of the welded joint showed a wave interface, in which a thin melt layer formed at the center and edge parts. The crystal grains near the bonding interface were remarkably elongated and refined. Therefore, the joining of the 2024/7075 pairs was facilitated through plastic forming and melting.展开更多
The dynamic stall problem for blades is related to the general performance of wind turbines,where a varying flow field is introduced with a rapid change of the effective angle of attack (AOA).The objective of this wor...The dynamic stall problem for blades is related to the general performance of wind turbines,where a varying flow field is introduced with a rapid change of the effective angle of attack (AOA).The objective of this work is to study the aerodynamic performance of a sinusoidally oscillating NACA0012 airfoil.The coupled k-ω Menter's shear stress transport (SST) turbulence model and γ-Reθ transition model were used for turbulence closure.Lagrangian coherent structures (LCS) were utilized to analyze the dynamic behavior of the flow structures.The computational results were supported by the experiments.The results indicated that this numerical method can well describe the dynamic stall process.For the case with reduced frequency K =0.1,the lift and drag coefficients increase constantly with increasing angle prior to dynamic stall.When the AOA reaches the stall angle,the lift and drag coefficients decline suddenly due to the interplay between the first leading-and trailing-edge vortex.With further increase of the AOA,both the lift and drag coefficients experience a secondary rise and fall process because of formation and shedding of the secondary vortex.The results also reveal that the dynamic behavior of the flow structures can be effectively identified using the finite-time Lyapunov exponent (FTLE) field.The influence of the reduced frequency on the flow structures and energy extraction efficiency in the dynamic stall process is further discussed.When the reduced frequency increases,the dynamic stall is delayed and the total energy extraction efficiency is enhanced.With K =0.05,the amplitude of the dynamic coefficients fluctuates more significantly in the poststall process than in the case of K =0.1.展开更多
Anode foil of aluminum electrolytic capacitor,which requires large surface area for high capacitance,were prepared by rolling,annealing and electrochemical etching.Effects of cerium addition on the capacitance of alum...Anode foil of aluminum electrolytic capacitor,which requires large surface area for high capacitance,were prepared by rolling,annealing and electrochemical etching.Effects of cerium addition on the capacitance of aluminum electrolytic capacitors were investigated.Microstructure of the aluminum foil surface was observed by optical microscopy(OM) and scanning electron microscopy(SEM).Electron back scattered diffraction(EBSD) was also employed to reveal texture evolvement of cold-rolled aluminum foil after annealed.The results showed that addition of cerium contributed to higher <100> texture and higher etch pit density as well.Moreover,the distribution of etch tunnels was more uniform compared with that without cerium addition.Perfect specific surface area was obtained with 0.0074% addition of cerium.展开更多
A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is e...A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).展开更多
Adsorption and inhibition behavior of 2,5-bis(ethyldisulfanyl)-1,3,4-thiadiazole(DMTDA) and N-((6-methyl-1H-benzo[d][1,2,3]triazol-1-yl)methyl)-N-octyloctan-1-amine(EAMBA) as corrosion inhibitors contained in copper f...Adsorption and inhibition behavior of 2,5-bis(ethyldisulfanyl)-1,3,4-thiadiazole(DMTDA) and N-((6-methyl-1H-benzo[d][1,2,3]triazol-1-yl)methyl)-N-octyloctan-1-amine(EAMBA) as corrosion inhibitors contained in copper foil rolling oil have been investigated using gravimetric and electrochemical techniques. Meanwhile, scanning electron microscopy(SEM) and energy dispersive spectrometer(EDS) have been employed to observe the surface topography and analyze the components on copper foil. The results show that the rolling oil containing DMTDA and EAMBA can significantly decrease the dissolution rate and increase the inhibition efficiency of samples, especially in the case of best compounded rolling oil system. The SEM and EDS investigations also confirmed that the protection of the copper foil surface is achieved by strong adsorption of the molecules which can prevent copper from being corroded easily. Reactivity descriptors of the corrosion inhibitors have been calculated by the density functional theory(DFT) and the reactivity has been analyzed through the molecular orbital and Fukui indices. Active sites of inhibitor are mainly concentrated on the ring and the polar functional groups, and in the meanwhile, the distribution is helpful to form coordination and backbonding among molecules and then to form stable adsorption on the metal surface. And this work provides theoretical evidence for the selection of corrosion inhibitors contained in copper foil rolling oil.展开更多
The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth...The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.展开更多
In the present work,austenitic stainless steel(ASS)304 foils with a thickness of 50μm were first annealed at temperatures ranging from 700 to 1100℃for 1 h to obtain different microstructural characteristics.Then the...In the present work,austenitic stainless steel(ASS)304 foils with a thickness of 50μm were first annealed at temperatures ranging from 700 to 1100℃for 1 h to obtain different microstructural characteristics.Then the effects of microstructural characteristics on the formability of ASS 304 foils and the quality of drawn cups using micro deep drawing(MDD)were studied,and the mechanism involved was discussed.The results show that the as-received ASS 304 foil has a poor formability and cannot be used to form a cup using MDD.Serious wrinkling problem occurs on the drawn cup,and the height profile distribution on the mouth and the symmetry of the drawn cup is quite non-uniform when the annealing temperature is 700℃.At annealing temperatures of 900 and 950℃,the drawn cups are both characterized with very few wrinkles,and the distribution of height profile,symmetry and mouth thickness are uniform on the mouths of the drawn cups.The wrinkling becomes increasingly significant with a further increase of annealing temperature from 950 to 1100℃.The optimal annealing temperatures obtained in this study are 900 and 950℃for reducing the generation of wrinkling,and therefore improving the quality of drawn cups.With non-optimized microstructure,the distribution of the compressive stress in the circumferential direction of the drawn foils becomes inhomogeneous,which is thought to be the cause of the occurrence of localized deformation till wrinkling during MDD.展开更多
文摘Exploding foil initiator(EFI)is a kind of advanced device for initiating explosives,but its function is unstable when it comes to directly igniting pyrotechnics.To solve the problem,this research aims to reveal the ignition mechanism of EFIs directly igniting pyrotechnics.An oscilloscope,a photon Doppler velocimetry,and a plasma spectrum measurement system were employed to obtain information of electric characteristics,impact pressure,and plasma temperature.The results of the electric characteristics and the impact pressure were inconsistent with ignition results.The only thing that the ignition success tests had in common was that their plasma all had a relatively long period of high-temperature duration(HTD).It eventually concludes that the ignition mechanism in this research is the microconvection heat transfer rather than the shock initiation,which differs from that of exploding foil initiators detonating explosives.Furthermore,the methods for evaluating the ignition success of semiconductor bridge initiators are not entirely applicable to the tests mentioned in this paper.The HTD is the critical parameter for judging the ignition success,and it is influenced by two factors:the late time discharge and the energy of the electric explosion.The longer time of the late time discharge and the more energy of the electric explosion,the easier it is to expand the HTD,which improves the probability of the ignition success.
基金Project supported by the Basic and Applied Basic Research Foundation of Guangdong Province,China(Grant Nos.2019A1515110302 and 2022A1515140003)the Key Research and Development Program of Guangdong Province,China(Grant Nos.2020B010189001,2021B0301030002,2019B010931001,and 2018B030327001)+5 种基金the National Natural Science Foundation of China(Grant Nos.52172035,52025023,52322205,51991342,52021006,51991344,52100115,11888101,92163206,12104018,and 12274456)the National Key Research and Development Program of China(Grant Nos.2021YFB3200303,2022YFA1405600,2018YFA0703700,2021YFA1400201,and 2021YFA1400502)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB33000000)the Pearl River Talent Recruitment Program of Guangdong Province,China(Grant No.2019ZT08C321)China Postdoctoral Science Foundation(Grant Nos.2020T130022 and 2020M680178)the Science and Technology Plan Project of Liaoning Province,China(Grant No.2021JH2/10100012).
文摘High-purity copper(Cu) with excellent thermal and electrical conductivity, is crucial in modern technological applications, including heat exchangers, integrated circuits, and superconducting magnets. The current purification process is mainly based on the zone/electrolytic refining or anion exchange, however, which excessively relies on specific integrated equipment with ultra-high vacuum or chemical solution environment, and is also bothered by external contaminants and energy consumption. Here we report a simple approach to purify the Cu foils from 99.9%(3N) to 99.99%(4N) by a temperature-gradient thermal annealing technique, accompanied by the kinetic evolution of single crystallization of Cu.The success of purification mainly relies on(i) the segregation of elements with low effective distribution coefficient driven by grain-boundary movements and(ii) the high-temperature evaporation of elements with high saturated vapor pressure.The purified Cu foils display higher flexibility(elongation of 70%) and electrical conductivity(104% IACS) than that of the original commercial rolled Cu foils(elongation of 10%, electrical conductivity of ~ 100% IACS). Our results provide an effective strategy to optimize the as-produced metal medium, and therefore will facilitate the potential applications of Cu foils in precision electronic products and high-frequency printed circuit boards.
基金National Natural Science Foundation of China(Grant No.11872013)for supporting this project.
文摘Al/Ni reactive multilayer foil(RMF)possesses excellent comprehensive properties as a promising substitute for traditional Cu bridge.A theoretical resistivity model of Al/Ni RMF was developed to guide the optimization of EFIs.Al/Ni RMF with different bilayer thicknesses and bridge dimensions were prepared by MEMS technology and electrical explosion tests were carried out.According to physical and chemical reactions in bridge,the electrical explosion process was divided into 5 stages:heating of condensed bridge,vaporization and diffusion of Al layers,intermetallic combination reaction,intrinsic explosion,ionization of metal gases,which are obviously shown in measured voltage curve.Effects of interface and grain boundary scattering on the resistivity of film metal were considered.Focusing on variations of substance and state,the resistivity was developed as a function of temperature at each stage.Electrical explosion curves were calculated by this model at different bilayer thicknesses,bridge dimensions and capacitor voltages,which showed an excellent agreement with experimental ones.
文摘Taking bump-type gas foil bearings as the research object,a deformation model of bump foil and a thin-plate finite element model of top foil were proposed.By solving Reynolds equation and energy equation,the pressure distribution and the temperature distribution of gas films in foil bearings were obtained.Further,a numerical method for calculating the lubrication performance of gas foil bearings with considering the surface roughness was proposed.With a specific example,effects of the surface roughness on the bearing lubrication performance were parametrically studied.The results indicate that rougher journal surface can lead to larger fluctuation of the lubrication performance,while surface roughness of top foil has few effects on the fluctuation.Moreover,the mean values of performance parameters almost remain constant at different values of surface roughness.
文摘Ti/Fe clad plate had attracted extensive attention because of its important application. In order to reduce the titanium layer thickness, the explosive welding of TA1 titanium foil to Q235 steel plate was carried out. The interfacial bonding performance was analyzed by micromorphology analysis and mechanical property test, and the formation process of interfacial wave and molten block in the vortex was simulated by smoothed particle hydrodynamics(SPH) method. The results showed that salt as pressure transfer layer used in explosive welding could play a good buffer effect on the collision between flyer and base layers. Regular waveforms were formed on the bonding interface, and the titanium foil/steel clad plate exhibited good welding quality and bonding property. The crest of the observed interfacial wave moved 200 μm from the beginning to the final formation, and it was important of jet on the formation of interfacial waveform. The interface was mainly bonded in the form of molten layer, and the grains near the interface were streamlined. Molten block containing intermetallic compounds and metal oxides appeared in the vortex of wave crest.
基金supported by the Russian Science Foundation,Project No.19-79-30086-P.
文摘The results of a study of the electrical explosion of aluminum foils with an artificial periodic surface structure created by laser engraving are presented.Experiments were carried out on pulsed high-current generators BIN(270 kA,300 kV,100 ns)and KING(200 kA,40 kV,200 ns)with Al foil of thicknesses 16 and 4μm,respectively.Images of the exploded foils were recorded by point projection radiography in the radiation from hybrid X-pinches.It is found that the application of an artificial periodic structure to the foil leads to a much more uniform and well-defined periodic structure of the exploded foil.Images recorded in the UV range using a microchannel-plate-intensified detector show that the radiation from a surface-modified foil is more uniform along the entire length and width of the foil than that from a foil without modification.
文摘The exploding foil,which is a main influence factor of exploding foil initiator(EFI),was studied to improve the utilization rate of energy in EFI.The burst currents of three bridge foils with different shapes were measured,and the sensitivity of initiation charge made of HNS-IV was tested by slappers.The test results show that,for O-shaped bridge foil,the burst current density is maximal,and the initiating voltage at 50% of firing probability of HNS-IV is minimal.The O-shaped bridge foil can be used to improve the utilization rate of energy in EFI and reduce the firing energy.
文摘为了能更有效地处理含有噪音数据的数据集,提出了一个基于GDT(general distribution table)的对FOIL系统的改进方法,该方法利用GDT的思想、规则强度等概念,考虑到数据由噪音引起的不确定性.通过对FOIL系统算法的改进,能够很好地解决FOIL系统对含有噪音训练例集的学习能力,提高FOIL的学习精度.同时,通过例子阐述了该方法的实施过程,分析表明:该算法是一种新的有效地处理含有噪音数据的一阶谓词学习系统.
基金Funded by the State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body(No.31815008)the National Natural Science Foundation of China(No.U1564202,NO.51205298)111 Project(No.B17034)
文摘Vaporizing foil actuator welding(VFAW) was used for joining 2024-T3 and 7075-T6 aluminum alloy sheets, and the resulting joint microstructure was analyzed. 2024/7075 aluminum alloy pairs with suitable processing parameters can be prepared by using VFAW. Dynamic preform addresses the poor formability problem of target material and advantage of VFAW on dissimilar materials in some conditions. But with standoff sheet inserting in the flyer and target, 2024/7075 welded pairs gets the better weld strength, compared with flyer preformed method. The microstructure of the circular weld area of the welded joint showed a wave interface, in which a thin melt layer formed at the center and edge parts. The crystal grains near the bonding interface were remarkably elongated and refined. Therefore, the joining of the 2024/7075 pairs was facilitated through plastic forming and melting.
基金the National Postdoctoral Program for Innovative Talents(Grant BX201700126)the China Postdoctoral Science Foundation(Grant 2017M620043)+1 种基金the National Natural Science Foundation of China(Grants 51679005 and 91752105)the National Natural Science Foundation of Beijing(Grant 3172029).
文摘The dynamic stall problem for blades is related to the general performance of wind turbines,where a varying flow field is introduced with a rapid change of the effective angle of attack (AOA).The objective of this work is to study the aerodynamic performance of a sinusoidally oscillating NACA0012 airfoil.The coupled k-ω Menter's shear stress transport (SST) turbulence model and γ-Reθ transition model were used for turbulence closure.Lagrangian coherent structures (LCS) were utilized to analyze the dynamic behavior of the flow structures.The computational results were supported by the experiments.The results indicated that this numerical method can well describe the dynamic stall process.For the case with reduced frequency K =0.1,the lift and drag coefficients increase constantly with increasing angle prior to dynamic stall.When the AOA reaches the stall angle,the lift and drag coefficients decline suddenly due to the interplay between the first leading-and trailing-edge vortex.With further increase of the AOA,both the lift and drag coefficients experience a secondary rise and fall process because of formation and shedding of the secondary vortex.The results also reveal that the dynamic behavior of the flow structures can be effectively identified using the finite-time Lyapunov exponent (FTLE) field.The influence of the reduced frequency on the flow structures and energy extraction efficiency in the dynamic stall process is further discussed.When the reduced frequency increases,the dynamic stall is delayed and the total energy extraction efficiency is enhanced.With K =0.05,the amplitude of the dynamic coefficients fluctuates more significantly in the poststall process than in the case of K =0.1.
基金supported by the Inner Mongolia Important Science & Technology Project (20071911)Inner Mongolia Technology Research & Development Project
文摘Anode foil of aluminum electrolytic capacitor,which requires large surface area for high capacitance,were prepared by rolling,annealing and electrochemical etching.Effects of cerium addition on the capacitance of aluminum electrolytic capacitors were investigated.Microstructure of the aluminum foil surface was observed by optical microscopy(OM) and scanning electron microscopy(SEM).Electron back scattered diffraction(EBSD) was also employed to reveal texture evolvement of cold-rolled aluminum foil after annealed.The results showed that addition of cerium contributed to higher <100> texture and higher etch pit density as well.Moreover,the distribution of etch tunnels was more uniform compared with that without cerium addition.Perfect specific surface area was obtained with 0.0074% addition of cerium.
文摘A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).
基金the financial assistance provided by the National Natural Science Foundation of China (No. 51474025)the Cooperation Program between USTB and SINOPEC (No.112116)
文摘Adsorption and inhibition behavior of 2,5-bis(ethyldisulfanyl)-1,3,4-thiadiazole(DMTDA) and N-((6-methyl-1H-benzo[d][1,2,3]triazol-1-yl)methyl)-N-octyloctan-1-amine(EAMBA) as corrosion inhibitors contained in copper foil rolling oil have been investigated using gravimetric and electrochemical techniques. Meanwhile, scanning electron microscopy(SEM) and energy dispersive spectrometer(EDS) have been employed to observe the surface topography and analyze the components on copper foil. The results show that the rolling oil containing DMTDA and EAMBA can significantly decrease the dissolution rate and increase the inhibition efficiency of samples, especially in the case of best compounded rolling oil system. The SEM and EDS investigations also confirmed that the protection of the copper foil surface is achieved by strong adsorption of the molecules which can prevent copper from being corroded easily. Reactivity descriptors of the corrosion inhibitors have been calculated by the density functional theory(DFT) and the reactivity has been analyzed through the molecular orbital and Fukui indices. Active sites of inhibitor are mainly concentrated on the ring and the polar functional groups, and in the meanwhile, the distribution is helpful to form coordination and backbonding among molecules and then to form stable adsorption on the metal surface. And this work provides theoretical evidence for the selection of corrosion inhibitors contained in copper foil rolling oil.
基金supported by the Natural Sciences and Engineering Research Council(NSERC)of CanadaThe financial support of the State Scholarship Fund of China(No.201506160061)
文摘The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.
基金Supported by National Natural Science Foundation of China(Grant Nos.51975398,51974196)Research Project Supported by Shanxi Scholarship Council of China(Grant No.2020-037).
文摘In the present work,austenitic stainless steel(ASS)304 foils with a thickness of 50μm were first annealed at temperatures ranging from 700 to 1100℃for 1 h to obtain different microstructural characteristics.Then the effects of microstructural characteristics on the formability of ASS 304 foils and the quality of drawn cups using micro deep drawing(MDD)were studied,and the mechanism involved was discussed.The results show that the as-received ASS 304 foil has a poor formability and cannot be used to form a cup using MDD.Serious wrinkling problem occurs on the drawn cup,and the height profile distribution on the mouth and the symmetry of the drawn cup is quite non-uniform when the annealing temperature is 700℃.At annealing temperatures of 900 and 950℃,the drawn cups are both characterized with very few wrinkles,and the distribution of height profile,symmetry and mouth thickness are uniform on the mouths of the drawn cups.The wrinkling becomes increasingly significant with a further increase of annealing temperature from 950 to 1100℃.The optimal annealing temperatures obtained in this study are 900 and 950℃for reducing the generation of wrinkling,and therefore improving the quality of drawn cups.With non-optimized microstructure,the distribution of the compressive stress in the circumferential direction of the drawn foils becomes inhomogeneous,which is thought to be the cause of the occurrence of localized deformation till wrinkling during MDD.
