The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forgin...The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forging load and deformed buIge profile during upset forging of blocks. Simulation of upsetforging of rectangular blocks under various friction condjtions was performed. Comparison of the computed results with experiments and FEM shows good agreement. It is shown that this techniquecan be used for 3D simulation of metal forming process.展开更多
Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated t...Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated that average grain size became finer with the increasing number of upsetting and stretching.Especially,the size of stretching three times with upsetting twice had the most remarkable effect on refinement,and the size was only 27.36%of the original one.Moreover,the stress model was integrated into the software and finite element models were established.Simulation results demonstrated that the strain at center point of workpiece was far larger than critical strain value in each process,so that dynamic recrystallization(DRX) occurred in each workpiece,which implied DRX could occur for several times with the increasing number of upsetting and stretching,and uniform finer microstructure would be obtained.However,the results also showed that higher temperature was an unfavorable factor for grain refinement,so the times of heating should be limited for workpiece,and as many forging processes as possible should be finished in once heating.展开更多
文摘The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forging load and deformed buIge profile during upset forging of blocks. Simulation of upsetforging of rectangular blocks under various friction condjtions was performed. Comparison of the computed results with experiments and FEM shows good agreement. It is shown that this techniquecan be used for 3D simulation of metal forming process.
基金the National Science and Technology Major Project of China(No.2012ZX04012-011-02)the National Basic Research Program(973)of China(No.2011CB012903)
文摘Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated that average grain size became finer with the increasing number of upsetting and stretching.Especially,the size of stretching three times with upsetting twice had the most remarkable effect on refinement,and the size was only 27.36%of the original one.Moreover,the stress model was integrated into the software and finite element models were established.Simulation results demonstrated that the strain at center point of workpiece was far larger than critical strain value in each process,so that dynamic recrystallization(DRX) occurred in each workpiece,which implied DRX could occur for several times with the increasing number of upsetting and stretching,and uniform finer microstructure would be obtained.However,the results also showed that higher temperature was an unfavorable factor for grain refinement,so the times of heating should be limited for workpiece,and as many forging processes as possible should be finished in once heating.
