With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic ...With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic movements,the strike-slip faults have controlled the distribution of hydrocarbon resources owing to the special fault characteristics and fault-related structures.In contrast,the kinematics and formation mechanism of strike-slip faults in buried sedimentary basins are difficult to investigate,limiting the discussion of these faults and hydrocarbon accumulation.In this study,we identified the characteristics of massive sigmoidal tension gashes(STGs)that formed in the Shunnan area of the Tarim Basin.High-resolution three-dimensional seismic data and attribute analyses were used to investigate their geometric and kinematic characteristics.Then,the stress state of each point of the STGs was calculated using seismic curvature attributes.Finally,the formation mechanism of the STGs and their roles in controlling hydrocarbon migration and accumulation were discussed.The results suggest that:(1)the STGs developed in the Shunnan area have a wide distribution,with a tensile fault arranged in an enéchelon pattern,showing an S-shaped bending.These STGs formed in multiple stages,and differential rotation occurred along the direction of strike-slip stress during formation.(2)Near the principal displacement zone of the strike-slip faults,the stress value of the STGs was higher,gradually decreasing at both ends.The shallow layer deformation was greater than the deep layer deformation.(3)STGs are critical for connecting source rocks,migrating oil and gas,sealing horizontally,and developing efficient reservoirs.This study not only provides seismic evidence for the formation and evolution of super large STGs,but also provides certain guidance for oil and gas exploration in this area.展开更多
A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geogr...A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geographical distribution,dynamic development process,and failure mechanism of these ground fissures by employing field monitoring,numerical simulation,and theoretical analysis.The findings demonstrate that ground fissure development has an obvious feature of subregion,and its geographical distribution is significantly affected by topography.Tensile type,open type,and stepped type are three different categories of ground fissure.Ground fissures emerge dynamically as the panel advances,and they typically develop with a distance of less than periodic weighting step distance in advance of panel advancing position.Ground fissures present the dynamic development feature,temporary fissure has the ability of self-healing.The dynamic development process of ground fissure with closed-distance coal seam repeated mining is expounded,and the development scale is a dynamic development stage of“closure→expansion→stabilized”on the basis of the original development scale.From the perspective of topsoil deformation,the computation model considering two points movement vectors towards two directions of the gob and the ground surface is established,the development criterion considering the critical deformation value of topsoil is obtained.The mechanical model of hinged structure of inclined body is proposed to clarify the ground fissure development,and the interaction between slope activity and ground fissure development is expounded.These research results fulfill the gap of ground fissures about development regularity and formation mechanism,and can contribute to ground fissure prevention and treatment with Karst landform.展开更多
Due to the insufficient slip systems in hexagonal close-packed structure,twinning is frequently activated to support stable plastic deformation of Mg alloy.In this work,we found four typical twin-like interfaces with ...Due to the insufficient slip systems in hexagonal close-packed structure,twinning is frequently activated to support stable plastic deformation of Mg alloy.In this work,we found four typical twin-like interfaces with misorientations of 102°,109°,142°and 149°,respectively,which had not only a shared[1120]zone axis of neighboring grains,but also overlapped diffraction spots similar to twins.However,highresolution transmission electron microscope(HRTEM)analysis revealed that the interfaces in real space deviated from the supposed twinning planes in reciprocal space,i.e.their overlapped diffraction spots.We clarified that the incoherent interfaces were co-axial grain boundaries(CGBs).Additionally,a special angle ofθ,close to 90°,between the interface and one side of basal plane,was frequently formed in CGBs.We proposed that interaction of multiple twinning contributes to the formation of CGBs,and theθis formed due to alternative tensile and compression twinning under a uniaxial loading.展开更多
This study aims to explore the formation mechanism of ethyl acetate and organic acids in acid rice soup(rice-acid soup)inoculated with Kluyveromyces marxianus L1-1 through the complementary analysis of transcriptome a...This study aims to explore the formation mechanism of ethyl acetate and organic acids in acid rice soup(rice-acid soup)inoculated with Kluyveromyces marxianus L1-1 through the complementary analysis of transcriptome and proteome.The quantity of K.marxianus L1-1 varied significantly in the fermentation process of rice-acid soup and the first and third days were the two key turning points in the growth phase of K.marxianus L1-1.Importantly,the concentrations of ethyl acetate,ethanol,acetic acid,and L-lactic acid increased from day 1 to day 3.At least 4231 genes and 2937 proteins were identified and 610 differentially expressed proteins were annotated to 30 Kyoto Encyclopedia of Genes and Genomes(KEGG)pathways based on the analysis results of transcriptome and proteome.The key genes and proteins including up-regulated alcohol dehydrogenase family,alcohol O-acetyltransferase,acetyl-CoA C-acetyltransferase,acyl-coenzyme A thioester hydrolase,and down-regulated aldehyde dehydrogenase family were involved in glycolysis/gluconeogenesis pathways,starch and sucrose metabolism pathways,amino sugar and nucleotide sugar metabolism pathways,tricarboxylic acid(TCA)cycle,and pyruvate metabolism pathways,thus promoting the formation of ethyl acetate,organic acids,alcohols,and other esters.Our results revealed the formation mechanisms of ethyl acetate and organic acids in rice-acid soup inoculated with K.marxianus L1-1.展开更多
The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC)...The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic展开更多
The upper reaches of the Minjiang River are in the eastern margin of the Tibetan Plateau,where active faults are well developed and earthquakes frequently occur.Anomalous climate change and the extremely complex geome...The upper reaches of the Minjiang River are in the eastern margin of the Tibetan Plateau,where active faults are well developed and earthquakes frequently occur.Anomalous climate change and the extremely complex geomechanical properties of rock and soil have resulted in a number of geohazards.Based on the analysis of remote sensing interpretations,geological field surveys,geophysical prospecting and geological dating results,this paper discusses the developmental characteristics of the Gamisi ancient landslide in Songpan County,Sichuan Province,and investigates its geological age and formation mechanism.This study finds that the Gamisi ancient landslide is in the periglacial region of the Minshan Mountain and formed approximately 25 ka BP.The landslide initiation zone has a collapse and slide zone of approximately 22.65×106–31.7×106 m3 and shows a maximum sliding distance of approximately 1.42 km,with an elevation difference of approximately 310 m between the back wall of the landslide and the leading edge of the accumulation area.The landslide movement was characterized by a high speed and long runout.During the sliding process,the landslide body eroded and dammed the ancient Minjiang River valley.The ancient river channel was buried 30-60 m below the surface of the landslide accumulation area.Geophysical prospecting and drilling observations revealed that the ancient riverbed was approximately 80-100 m thick.After the dam broke,the Minjiang River was migrated to the current channel at the leading edge of the landslide.The Gamisi ancient landslide was greatly affected by the regional crustal uplift,topography,geomorphology and paleoclimatic change.The combined action of periglacial karstification and climate change caused the limestone at the rear edge of the landslide fractured,thus providing a lithological foundation for landslide occurrence.Intense tectonic activity along the Minjiang Fault,which runs through the middle and trailing parts of the Gamisi ancient landslide,may have been the main factor inducing landsliding.Studying the Gamisi ancient landslide is of great significance for investigating the regional response to paleoclimatic change and geomorphologic evolution of the Minjiang Fault since the late Pleistocene and for disaster prevention and mitigation.展开更多
Scientific collaboration has become an important part of the people-to-people exchanges in the Belt and Road initiative,and remarkable progress has been made since 2013.Taking the 65 countries along the Belt and Road(...Scientific collaboration has become an important part of the people-to-people exchanges in the Belt and Road initiative,and remarkable progress has been made since 2013.Taking the 65 countries along the Belt and Road(BRI countries)as the research areas and using collaborated Web of Science(WOS)core collection papers to construct an international scientific collaboration matrix,the paper explores the spatial structure,hierarchy and formation mechanisms of scientific collaboration networks of 65 countries along the Belt and Road.The results show that:1)Beyond the Belt and Road regions(BRI regions),Central&Eastern Europe,China and West Asia&North Africa have formed a situation in which they all have the most external links with other countries beyond BRI regions.China has the dominant role over other BRI countries in generating scientific links.The overall spatial structure has changed to a skeleton structure consisting of many dense regions,such as Europe,North America,East Asia and Oceania.2)Within the Belt and Road regions,Central&Eastern Europe has become the largest collaboration partner with other sub-regions in BRI countries.The spatial structure of scientific collaboration networks has transformed from the‘dual core’composed of China and the Central&Eastern Europe region,to the‘multi-polarization’composed of‘one zone and multi-points’.3)The hierarchical structure of scientific collaboration networks presents a typical‘core-periphery’structure,and changes from‘single core’to‘double cores’.4)Among the formation mechanisms of scientific collaboration networks,scientific research strength and social proximity play the most important roles,while geographical distance gradually weakens the hindrance to scientific collaboration.展开更多
Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily i...Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily intake and physic-chemical properties of dioxins are briefly summarized. Three formation mechanisms of dioxins in waste incineration process, namely as de novo synthesis, mechanisms involving small organic molecular as precursors and homogenous gas phase reaction mechanism are alto reviewed. The influencing factors for dioxins formation during waste incineration process are also discussed. Three major methods for reducing dioxins emission from waste incineration process are discussed based upon the formation mechanisms and influencing factors. A new waste incineration process with low dioxins emission and low hydrogen chloride corrosion has been proposed based on multi- stage unit operation principal according to formation mechanisms of dioxins and potential production location in waste incinerators.展开更多
Inconel 718,a nickel,chrome and iron alloy,has special advantages,such as high-temperature strength,thermal resistance and corrosion resistance,which facilitate wide usage in the aerospace industry,especially in the h...Inconel 718,a nickel,chrome and iron alloy,has special advantages,such as high-temperature strength,thermal resistance and corrosion resistance,which facilitate wide usage in the aerospace industry,especially in the hot sections of gas turbine engines.However,machining this alloy is correlated closely with the material’s inherent properties such as excellent combination of strength,hardness and toughness,low thermal conductivity and the tendency to adhere to cutting tools.This nickel alloy also contains inclusions of hard abrasive carbide particles that lead to work-hardening of the workpiece material and thus abrasive wear of the cutting tool.That is,the machining of Inconel 718 is always influenced by high mechanical and thermal loads.This article reviews the chip formation mechanism of Inconel 718.One of the main characteristics in machining of Inconel 718 is that it will produce serrated or segmented chips in a wide range of cutting speeds and feeds.Existing studies show that the chip serration or segmentation by shear localization affects the machined surface integrity,and also contributes to the chip’s evacuation and the automation of machining operations.Thus,research conclusion indicates that the serrated or segmented chip phenomenon is desirable in reducing the level of cutting force,and detailed analysis of models and approaches to understand the chip formation mechanism of Inconel 718 is vital for machining this alloy effectively and efficiently.Therefore,this article presents some summaries on the models and approaches on the chip formation in machining of Inconel 718.展开更多
The formation mechanism of the spheroidal carbide in the ultra-low carbon ductile cast iron fabricated by the metal mold casting technique was systematically investigated. The results demonstrated that the spheroidal ...The formation mechanism of the spheroidal carbide in the ultra-low carbon ductile cast iron fabricated by the metal mold casting technique was systematically investigated. The results demonstrated that the spheroidal carbide belonged to eutectic carbide and crystallized in the isolated eutectic liquid phase area. The formation process of the spheroidal carbide was related to the contact and the intersection between the primary dendrite and the secondary dendrite of austenite. The oxides of magnesium, rare earths and other elements can act as heterogeneous nucleation sites for the spheroidal carbide. It was also found that the amount of the spheroidal carbide would increase with an increase in carbon content. The cooling rate has an important influence on the spheroidal carbide under the same chemical composition condition.展开更多
The curved martensite structures have been observed in CuZnAl-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in a...The curved martensite structures have been observed in CuZnAl-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in as-solution treated, as-aged and as-trained alloys usually occurred around dislocation tangles or precipitate, at the plate boundary or grain boundary, and when the growing plates collided with each other or alternate mutually.展开更多
Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over severa...Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over several microns.Analysis of intermediate objects in the products indicates that their formation mechanism follows the wire-to-tube model.Besides,according to thermodynamic analysis of the driving force combing with experimental results,we find that the thermal gradient can effectively favor the formation of CNTs in our metallic catalyst-free CVD.展开更多
Grain-displacing hydrate deposits exist at many marine sites,which constitute an important part of methane hydrate resources worldwide.Attributed to the difficulties in acquiring field data and synthesizing experiment...Grain-displacing hydrate deposits exist at many marine sites,which constitute an important part of methane hydrate resources worldwide.Attributed to the difficulties in acquiring field data and synthesizing experimental samples,the formation and property characterization of grain-displacing hydrate remains less understood and characterized than the pore-filling hydrate in current literature.This study reviews the formation mechanisms of grain-displacing hydrate from the perspective of geological accumulation and microscale sedimentary property.The experimental methods of synthesizing grain-displacing hydrate in the laboratory and the current knowledge on the property of grain-displacing hydrate sediment are also introduced.Shortcomings in current theories and suggestions for future study are proposed.The work is hoped to provide valuable insights for the research into the hydrate accumulation,geophysics,and hydrate exploitation targeted at the grain-displacing hydrate in the marine sediments.展开更多
A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneousl...A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneously. It is suggested that two separate chemical reactions,i.e. Ni+Al →NiAl and Ti+2B→TiB2, are involved during the exothermic reaction. Additionof Ti and B to Ni-Al system impedes the structural evolution of Ni and Al powders and delays the abrupt reaction. The final products are equilibrium phases without any metastable phases formed. This type of reaction is suggested to be suitable for alloy systems with two large heatrelease reactions.展开更多
1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of...1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of morphologies like globular structure rod-like and tubular,by the order aggregating of these nanoparticles various展开更多
Molecular dynamics simulations are performed to observe the evolutions of 512 and 51262 cage-like water clusters filled with or without a methane molecule immersed in bulk liquid water at 250 K and 230 K. The lifetime...Molecular dynamics simulations are performed to observe the evolutions of 512 and 51262 cage-like water clusters filled with or without a methane molecule immersed in bulk liquid water at 250 K and 230 K. The lifetimes of these clusters are calculated according to their Lindemann index δ (t) using the criteria of δ≥0.07. For both the filled and empty clusters, we find the dynamics of bulk water determines the lifetimes of cage-like water clusters, and that the lifetime of 512 62 cage-like cluster is the same as that of 512 cage-like cluster. Although the methane molecule indeed makes the filled cage-like cluster more stable than the empty one, the empty cage-like cluster still has chance to be long-lived compared with the filled clusters. These observations support the labile cluster hypothesis on the formation mechanisms of gas hydrates.展开更多
This study reviews the distribution of groundwater salinity in an arid desert transition zone. By combining field experiments and computer simulation models we make a comprehensive analysis of the formation mechanism ...This study reviews the distribution of groundwater salinity in an arid desert transition zone. By combining field experiments and computer simulation models we make a comprehensive analysis of the formation mechanism of fresh groundwater in relation to the paleogeographic conditions of lithofacies, the geochemical characteristics of the aquifer media, salt deliverability in the vadose zone and prevailing hydrodynamic conditions. The results demonstrate that(1) the lacustrine facies deposition stratum of the Huanhe formation in the Cretaceous system provides a brackish-salt groundwater environment;(2) the average salinity of parent rocks are approximately 440 mg/kg and 4 371 mg/kg in the Quaternary eolian sand and the Cretaceous Huanhe formation respectively, suggesting that parent rocks are the principal controlling factor in the distribution of groundwater quality given that mineral and chemical composition of the eolian sand is simpler than that of the Huanhe formation;(3) average groundwater flow rates are approximately 0.25 m/d and 0.1 m/d in eolian sand and Huanhe formation aquifers respectively, indicating that hydrodynamic conditions play an important role in driving in the formation and evolution of fresh groundwater;(4) The salinity deliverability in the vadose zone overlying the aeolian sand and Huanhe formation aquifers are approximately 15.97 mg/L and 220.42 mg/L respectively, signifying that the combination of lithology and salt content of vadose zone, rainfall infiltration, evapotranspiration and concentration heavily influence the formation, distribution and evolution of groundwater quality. This study can provide a scientific basis for the sustainable development and utilization of groundwater resources in arid areas.展开更多
Clarifying the formation mechanism of poor settlements is the " pathological" basis for urban regeneration and poverty governance.On the basis of scientific determination of 155 poor settlements in Lanzhou C...Clarifying the formation mechanism of poor settlements is the " pathological" basis for urban regeneration and poverty governance.On the basis of scientific determination of 155 poor settlements in Lanzhou City,this paper classified their types and analyzed the characteristics of their quantity distribution and density distribution. From the perspective of spatial and social interaction,and combined the internal factors and external factors,this paper put forward the formation mechanism of poor settlements,namely,superposition of unit society collapse and physical environment degradation,interaction between differentiation of residents' income and reform of housing institution,interweaving between urban discontinuous planning and jumping construction,coupling between passive urbanization and active urbanization,and derivation of lagged economic development and unique regional culture.展开更多
The Western fundamentalist view of human rights,in contrast to Chinese society and culture,is external,and thus provides"conceptual form," "thinking method" and "theoretical technique"but...The Western fundamentalist view of human rights,in contrast to Chinese society and culture,is external,and thus provides"conceptual form," "thinking method" and "theoretical technique"but not concrete content.In the traditional Chinese ideology,the time-honored group standard cannot be replaced by the individual standard.In New China,priority is given to the freedom and independence of "everyone" and the realization of rights and interests for"all".Contemporary China combines the human rights conception in Marxism with China’s concrete reality.Meanwhile,it integrates the socialist idea of equality with the traditional culture of the Chinese nation,creating a dual-guarantee system for universal values and individual rights.It gives a clear-cut expression to contemporary China’s rich traits of the cultural tradition of emphasizing progress for all and the equality for all,the priority of realizing the survival and development of the people,and the reference to the achievements of human rights civilizations of other countries.Human rights development in contemporary China must further consolidate the political conditions and institutional base for realizing the "public " goal of human rights and build a solid institutional guarantee for the "private" value orientation of human rights,by means of the construction of the whole-process people’s democracy.展开更多
基金Thanks to the Northwest Oilfield Branch,SINOPEC,for providing the seismic data.We thank Dr.Yi-Duo Liu of University of Houston,Ying-Chang Cao and Fang Hao of China University of Petroleum(East China)for their constructive suggestions of this manuscript.We also thank two anonymous reviewers for their comments that helped us to improve the manuscript.This research is jointly supported by the National Natural Science Foundation of China(No.42272155)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA14010301)+1 种基金the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.41821002)National Natural Science Foundation of China(No.41702138).
文摘With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic movements,the strike-slip faults have controlled the distribution of hydrocarbon resources owing to the special fault characteristics and fault-related structures.In contrast,the kinematics and formation mechanism of strike-slip faults in buried sedimentary basins are difficult to investigate,limiting the discussion of these faults and hydrocarbon accumulation.In this study,we identified the characteristics of massive sigmoidal tension gashes(STGs)that formed in the Shunnan area of the Tarim Basin.High-resolution three-dimensional seismic data and attribute analyses were used to investigate their geometric and kinematic characteristics.Then,the stress state of each point of the STGs was calculated using seismic curvature attributes.Finally,the formation mechanism of the STGs and their roles in controlling hydrocarbon migration and accumulation were discussed.The results suggest that:(1)the STGs developed in the Shunnan area have a wide distribution,with a tensile fault arranged in an enéchelon pattern,showing an S-shaped bending.These STGs formed in multiple stages,and differential rotation occurred along the direction of strike-slip stress during formation.(2)Near the principal displacement zone of the strike-slip faults,the stress value of the STGs was higher,gradually decreasing at both ends.The shallow layer deformation was greater than the deep layer deformation.(3)STGs are critical for connecting source rocks,migrating oil and gas,sealing horizontally,and developing efficient reservoirs.This study not only provides seismic evidence for the formation and evolution of super large STGs,but also provides certain guidance for oil and gas exploration in this area.
基金funded by State Key Laboratory of Strata Intelligent Control and Green Mining Cofounded by Shandong Province and the Ministry of Science and Technology,Shandong University of Science and Technology(Grant No.MDPC2023ZR01)Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining(Grant No.WPUKFJJ2019-19)Major research project of Guizhou Provincial Department of Education on innovative groups(Grant No.Qianjiaohe KY[2019]070)。
文摘A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geographical distribution,dynamic development process,and failure mechanism of these ground fissures by employing field monitoring,numerical simulation,and theoretical analysis.The findings demonstrate that ground fissure development has an obvious feature of subregion,and its geographical distribution is significantly affected by topography.Tensile type,open type,and stepped type are three different categories of ground fissure.Ground fissures emerge dynamically as the panel advances,and they typically develop with a distance of less than periodic weighting step distance in advance of panel advancing position.Ground fissures present the dynamic development feature,temporary fissure has the ability of self-healing.The dynamic development process of ground fissure with closed-distance coal seam repeated mining is expounded,and the development scale is a dynamic development stage of“closure→expansion→stabilized”on the basis of the original development scale.From the perspective of topsoil deformation,the computation model considering two points movement vectors towards two directions of the gob and the ground surface is established,the development criterion considering the critical deformation value of topsoil is obtained.The mechanical model of hinged structure of inclined body is proposed to clarify the ground fissure development,and the interaction between slope activity and ground fissure development is expounded.These research results fulfill the gap of ground fissures about development regularity and formation mechanism,and can contribute to ground fissure prevention and treatment with Karst landform.
基金supported by the National Key R&D Program of China[grant number 2021YFA1200203]the Key Program of National Natural Science Foundation of China[grant number 51931003]+3 种基金the National Natural Science Foundation of China[grant numbers 52171118,52071178,51901103]the Projects in Science and Technique Plans of Ningbo City[grant number 2019B10083]the China Postdoctoral Science Foundation[grant number 2021M701715]the Opening Project of the Key Laboratory of Advanced Manufacturing and Intelligent Technology(Ministry of Education)of Harbin University of Science and Technology[grant number KFKT202103]
文摘Due to the insufficient slip systems in hexagonal close-packed structure,twinning is frequently activated to support stable plastic deformation of Mg alloy.In this work,we found four typical twin-like interfaces with misorientations of 102°,109°,142°and 149°,respectively,which had not only a shared[1120]zone axis of neighboring grains,but also overlapped diffraction spots similar to twins.However,highresolution transmission electron microscope(HRTEM)analysis revealed that the interfaces in real space deviated from the supposed twinning planes in reciprocal space,i.e.their overlapped diffraction spots.We clarified that the incoherent interfaces were co-axial grain boundaries(CGBs).Additionally,a special angle ofθ,close to 90°,between the interface and one side of basal plane,was frequently formed in CGBs.We proposed that interaction of multiple twinning contributes to the formation of CGBs,and theθis formed due to alternative tensile and compression twinning under a uniaxial loading.
基金financially supported by National Natural Science Foundation of China (32060530)Guizhou University, Gui Da Te Gang He Zi (2022) 39, Technology platform and talent team plan of Guizhou. China ((2018)5251)+2 种基金Graduate Research Fund Project of Guizhou (YJSCXJH(2019]028)Industry-University-Research Cooperation Project of Guizhou (701/700465172217)China Scholarship Council (201906670006)
文摘This study aims to explore the formation mechanism of ethyl acetate and organic acids in acid rice soup(rice-acid soup)inoculated with Kluyveromyces marxianus L1-1 through the complementary analysis of transcriptome and proteome.The quantity of K.marxianus L1-1 varied significantly in the fermentation process of rice-acid soup and the first and third days were the two key turning points in the growth phase of K.marxianus L1-1.Importantly,the concentrations of ethyl acetate,ethanol,acetic acid,and L-lactic acid increased from day 1 to day 3.At least 4231 genes and 2937 proteins were identified and 610 differentially expressed proteins were annotated to 30 Kyoto Encyclopedia of Genes and Genomes(KEGG)pathways based on the analysis results of transcriptome and proteome.The key genes and proteins including up-regulated alcohol dehydrogenase family,alcohol O-acetyltransferase,acetyl-CoA C-acetyltransferase,acyl-coenzyme A thioester hydrolase,and down-regulated aldehyde dehydrogenase family were involved in glycolysis/gluconeogenesis pathways,starch and sucrose metabolism pathways,amino sugar and nucleotide sugar metabolism pathways,tricarboxylic acid(TCA)cycle,and pyruvate metabolism pathways,thus promoting the formation of ethyl acetate,organic acids,alcohols,and other esters.Our results revealed the formation mechanisms of ethyl acetate and organic acids in rice-acid soup inoculated with K.marxianus L1-1.
文摘The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic
基金supported by the National Natural Science Foundation of China(41731287,41877279)China Geological Survey Project(DD20160271)
文摘The upper reaches of the Minjiang River are in the eastern margin of the Tibetan Plateau,where active faults are well developed and earthquakes frequently occur.Anomalous climate change and the extremely complex geomechanical properties of rock and soil have resulted in a number of geohazards.Based on the analysis of remote sensing interpretations,geological field surveys,geophysical prospecting and geological dating results,this paper discusses the developmental characteristics of the Gamisi ancient landslide in Songpan County,Sichuan Province,and investigates its geological age and formation mechanism.This study finds that the Gamisi ancient landslide is in the periglacial region of the Minshan Mountain and formed approximately 25 ka BP.The landslide initiation zone has a collapse and slide zone of approximately 22.65×106–31.7×106 m3 and shows a maximum sliding distance of approximately 1.42 km,with an elevation difference of approximately 310 m between the back wall of the landslide and the leading edge of the accumulation area.The landslide movement was characterized by a high speed and long runout.During the sliding process,the landslide body eroded and dammed the ancient Minjiang River valley.The ancient river channel was buried 30-60 m below the surface of the landslide accumulation area.Geophysical prospecting and drilling observations revealed that the ancient riverbed was approximately 80-100 m thick.After the dam broke,the Minjiang River was migrated to the current channel at the leading edge of the landslide.The Gamisi ancient landslide was greatly affected by the regional crustal uplift,topography,geomorphology and paleoclimatic change.The combined action of periglacial karstification and climate change caused the limestone at the rear edge of the landslide fractured,thus providing a lithological foundation for landslide occurrence.Intense tectonic activity along the Minjiang Fault,which runs through the middle and trailing parts of the Gamisi ancient landslide,may have been the main factor inducing landsliding.Studying the Gamisi ancient landslide is of great significance for investigating the regional response to paleoclimatic change and geomorphologic evolution of the Minjiang Fault since the late Pleistocene and for disaster prevention and mitigation.
基金Under the auspices of Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA20010103)。
文摘Scientific collaboration has become an important part of the people-to-people exchanges in the Belt and Road initiative,and remarkable progress has been made since 2013.Taking the 65 countries along the Belt and Road(BRI countries)as the research areas and using collaborated Web of Science(WOS)core collection papers to construct an international scientific collaboration matrix,the paper explores the spatial structure,hierarchy and formation mechanisms of scientific collaboration networks of 65 countries along the Belt and Road.The results show that:1)Beyond the Belt and Road regions(BRI regions),Central&Eastern Europe,China and West Asia&North Africa have formed a situation in which they all have the most external links with other countries beyond BRI regions.China has the dominant role over other BRI countries in generating scientific links.The overall spatial structure has changed to a skeleton structure consisting of many dense regions,such as Europe,North America,East Asia and Oceania.2)Within the Belt and Road regions,Central&Eastern Europe has become the largest collaboration partner with other sub-regions in BRI countries.The spatial structure of scientific collaboration networks has transformed from the‘dual core’composed of China and the Central&Eastern Europe region,to the‘multi-polarization’composed of‘one zone and multi-points’.3)The hierarchical structure of scientific collaboration networks presents a typical‘core-periphery’structure,and changes from‘single core’to‘double cores’.4)Among the formation mechanisms of scientific collaboration networks,scientific research strength and social proximity play the most important roles,while geographical distance gradually weakens the hindrance to scientific collaboration.
文摘Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily intake and physic-chemical properties of dioxins are briefly summarized. Three formation mechanisms of dioxins in waste incineration process, namely as de novo synthesis, mechanisms involving small organic molecular as precursors and homogenous gas phase reaction mechanism are alto reviewed. The influencing factors for dioxins formation during waste incineration process are also discussed. Three major methods for reducing dioxins emission from waste incineration process are discussed based upon the formation mechanisms and influencing factors. A new waste incineration process with low dioxins emission and low hydrogen chloride corrosion has been proposed based on multi- stage unit operation principal according to formation mechanisms of dioxins and potential production location in waste incinerators.
基金Supported by National Natural Science Foundation of China(Grant Nos.51975481 and 51675440)Fundamental Research Funds for the Central Universities(Grant No.3102020ZX004).
文摘Inconel 718,a nickel,chrome and iron alloy,has special advantages,such as high-temperature strength,thermal resistance and corrosion resistance,which facilitate wide usage in the aerospace industry,especially in the hot sections of gas turbine engines.However,machining this alloy is correlated closely with the material’s inherent properties such as excellent combination of strength,hardness and toughness,low thermal conductivity and the tendency to adhere to cutting tools.This nickel alloy also contains inclusions of hard abrasive carbide particles that lead to work-hardening of the workpiece material and thus abrasive wear of the cutting tool.That is,the machining of Inconel 718 is always influenced by high mechanical and thermal loads.This article reviews the chip formation mechanism of Inconel 718.One of the main characteristics in machining of Inconel 718 is that it will produce serrated or segmented chips in a wide range of cutting speeds and feeds.Existing studies show that the chip serration or segmentation by shear localization affects the machined surface integrity,and also contributes to the chip’s evacuation and the automation of machining operations.Thus,research conclusion indicates that the serrated or segmented chip phenomenon is desirable in reducing the level of cutting force,and detailed analysis of models and approaches to understand the chip formation mechanism of Inconel 718 is vital for machining this alloy effectively and efficiently.Therefore,this article presents some summaries on the models and approaches on the chip formation in machining of Inconel 718.
基金financially supported by the Hebei Province Science and Technology Support Program(No.14211007D)
文摘The formation mechanism of the spheroidal carbide in the ultra-low carbon ductile cast iron fabricated by the metal mold casting technique was systematically investigated. The results demonstrated that the spheroidal carbide belonged to eutectic carbide and crystallized in the isolated eutectic liquid phase area. The formation process of the spheroidal carbide was related to the contact and the intersection between the primary dendrite and the secondary dendrite of austenite. The oxides of magnesium, rare earths and other elements can act as heterogeneous nucleation sites for the spheroidal carbide. It was also found that the amount of the spheroidal carbide would increase with an increase in carbon content. The cooling rate has an important influence on the spheroidal carbide under the same chemical composition condition.
基金Science Council of Shandong Province!under Grant No.89F0274
文摘The curved martensite structures have been observed in CuZnAl-based shape memory alloys by both transmission electron microscope and optical microscope. It was found that the curved martensite structures observed in as-solution treated, as-aged and as-trained alloys usually occurred around dislocation tangles or precipitate, at the plate boundary or grain boundary, and when the growing plates collided with each other or alternate mutually.
基金supported by the Creative Research Group of National Science Foundation of China(Grant No.50721003)the Foundation of the Ministry of Education of China for Returned Scholars(Grant No.2005383)
文摘Our work reported that the so-called pure carbon nanotubes(CNTs)can be synthesized without metallic catalyst by chemical vapor deposition(CVD).The as-prepared CNTs have average diameter of 50 nm and length over several microns.Analysis of intermediate objects in the products indicates that their formation mechanism follows the wire-to-tube model.Besides,according to thermodynamic analysis of the driving force combing with experimental results,we find that the thermal gradient can effectively favor the formation of CNTs in our metallic catalyst-free CVD.
基金supported by the National Natural Science Foundation of China(42006181,42176212,41976205,41876051)the Youth Foundation of Natural Science Foundation of Shandong Province(ZR2020QE109)+1 种基金the National Key Research and Development Project(2018YFE0126400)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(2021QNLM020002).
文摘Grain-displacing hydrate deposits exist at many marine sites,which constitute an important part of methane hydrate resources worldwide.Attributed to the difficulties in acquiring field data and synthesizing experimental samples,the formation and property characterization of grain-displacing hydrate remains less understood and characterized than the pore-filling hydrate in current literature.This study reviews the formation mechanisms of grain-displacing hydrate from the perspective of geological accumulation and microscale sedimentary property.The experimental methods of synthesizing grain-displacing hydrate in the laboratory and the current knowledge on the property of grain-displacing hydrate sediment are also introduced.Shortcomings in current theories and suggestions for future study are proposed.The work is hoped to provide valuable insights for the research into the hydrate accumulation,geophysics,and hydrate exploitation targeted at the grain-displacing hydrate in the marine sediments.
文摘A NiAl/TiB2 nanocomposite is synthesized by mechanical alloying elemental powders. Upon milling for a certain time, an abrupt exothermic reaction occurs and a large amount of NiAl and TiB2 compounds form simultaneously. It is suggested that two separate chemical reactions,i.e. Ni+Al →NiAl and Ti+2B→TiB2, are involved during the exothermic reaction. Additionof Ti and B to Ni-Al system impedes the structural evolution of Ni and Al powders and delays the abrupt reaction. The final products are equilibrium phases without any metastable phases formed. This type of reaction is suggested to be suitable for alloy systems with two large heatrelease reactions.
基金supported by Natural Science Foundation of China(Project No.41206035,41602231)The National Nature Science Foundation of Guangdong Province(Project No.2015A030313157)
文摘1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of morphologies like globular structure rod-like and tubular,by the order aggregating of these nanoparticles various
基金supported by the National Natural Science Foundation of China(Grant No.40102005 and No.49725205).
文摘Molecular dynamics simulations are performed to observe the evolutions of 512 and 51262 cage-like water clusters filled with or without a methane molecule immersed in bulk liquid water at 250 K and 230 K. The lifetimes of these clusters are calculated according to their Lindemann index δ (t) using the criteria of δ≥0.07. For both the filled and empty clusters, we find the dynamics of bulk water determines the lifetimes of cage-like water clusters, and that the lifetime of 512 62 cage-like cluster is the same as that of 512 cage-like cluster. Although the methane molecule indeed makes the filled cage-like cluster more stable than the empty one, the empty cage-like cluster still has chance to be long-lived compared with the filled clusters. These observations support the labile cluster hypothesis on the formation mechanisms of gas hydrates.
基金supported by the “Groundwater exploration of energy base in the Ordos basin (Ningxia)” (No. 1212011121162) of China Geological Survey
文摘This study reviews the distribution of groundwater salinity in an arid desert transition zone. By combining field experiments and computer simulation models we make a comprehensive analysis of the formation mechanism of fresh groundwater in relation to the paleogeographic conditions of lithofacies, the geochemical characteristics of the aquifer media, salt deliverability in the vadose zone and prevailing hydrodynamic conditions. The results demonstrate that(1) the lacustrine facies deposition stratum of the Huanhe formation in the Cretaceous system provides a brackish-salt groundwater environment;(2) the average salinity of parent rocks are approximately 440 mg/kg and 4 371 mg/kg in the Quaternary eolian sand and the Cretaceous Huanhe formation respectively, suggesting that parent rocks are the principal controlling factor in the distribution of groundwater quality given that mineral and chemical composition of the eolian sand is simpler than that of the Huanhe formation;(3) average groundwater flow rates are approximately 0.25 m/d and 0.1 m/d in eolian sand and Huanhe formation aquifers respectively, indicating that hydrodynamic conditions play an important role in driving in the formation and evolution of fresh groundwater;(4) The salinity deliverability in the vadose zone overlying the aeolian sand and Huanhe formation aquifers are approximately 15.97 mg/L and 220.42 mg/L respectively, signifying that the combination of lithology and salt content of vadose zone, rainfall infiltration, evapotranspiration and concentration heavily influence the formation, distribution and evolution of groundwater quality. This study can provide a scientific basis for the sustainable development and utilization of groundwater resources in arid areas.
基金Supported by Young Scholar Project of Humanities and Social Science Foundation of Ministry of Education(14YJCZH212)
文摘Clarifying the formation mechanism of poor settlements is the " pathological" basis for urban regeneration and poverty governance.On the basis of scientific determination of 155 poor settlements in Lanzhou City,this paper classified their types and analyzed the characteristics of their quantity distribution and density distribution. From the perspective of spatial and social interaction,and combined the internal factors and external factors,this paper put forward the formation mechanism of poor settlements,namely,superposition of unit society collapse and physical environment degradation,interaction between differentiation of residents' income and reform of housing institution,interweaving between urban discontinuous planning and jumping construction,coupling between passive urbanization and active urbanization,and derivation of lagged economic development and unique regional culture.
基金the initial result of a major project of the Beijing Research Center of Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era and the Beijing Social Science Foundation.The name of the project is“Research on General Secretary Xi Jinping’s Important Discourse on Human Rights”(Project No.21LLFXA051)。
文摘The Western fundamentalist view of human rights,in contrast to Chinese society and culture,is external,and thus provides"conceptual form," "thinking method" and "theoretical technique"but not concrete content.In the traditional Chinese ideology,the time-honored group standard cannot be replaced by the individual standard.In New China,priority is given to the freedom and independence of "everyone" and the realization of rights and interests for"all".Contemporary China combines the human rights conception in Marxism with China’s concrete reality.Meanwhile,it integrates the socialist idea of equality with the traditional culture of the Chinese nation,creating a dual-guarantee system for universal values and individual rights.It gives a clear-cut expression to contemporary China’s rich traits of the cultural tradition of emphasizing progress for all and the equality for all,the priority of realizing the survival and development of the people,and the reference to the achievements of human rights civilizations of other countries.Human rights development in contemporary China must further consolidate the political conditions and institutional base for realizing the "public " goal of human rights and build a solid institutional guarantee for the "private" value orientation of human rights,by means of the construction of the whole-process people’s democracy.
