Algal blooms in lakes have become a common global environmental problem. Nowadays, remote sensing is widely used to monitor algal blooms in lakes due to the macroscopic, fast, real-time characteristics. However, it is...Algal blooms in lakes have become a common global environmental problem. Nowadays, remote sensing is widely used to monitor algal blooms in lakes due to the macroscopic, fast, real-time characteristics. However, it is often difficult to distinguish between algal blooms and aquatic vegetation due to their similar spectral characteristics. In this paper, we used modified vegetation presence frequency index(VPF) based on Moderate-resolution Imaging Spectroradiometer(MODIS) imagery to distinguish algal blooms from aquatic vegetation, and analyzed the spatial and temporal variations of algal blooms and aquatic vegetation from a phenological perspective for five large natural lakes with frequent algal bloom outbreaks in China from 2019 to 2020. We simplified the VPF method to make it with a higher spatial transferability so that it could be applied to other lakes in different climatic zones. Through accuracy validation, we found that the modified VPF method can effectively distinguish between algal blooms and aquatic vegetation, and the results vary from lake to lake. The highest accuracy of 97% was achieved in Hulun Lake, where the frequency of algal outbreaks is low and the extent of aquatic vegetation is stable, while the lowest accuracy of 76% was achieved in Dianchi Lake, which is rainy in summer and the lake is small. Analyses suggests that the time period when algal blooms occur most frequently might not coincide with that when they have the largest area. However, in most cases these two are close in terms of time period. The modified VPF method has a broad scope of application, is easy to implement, and has a high practical value. Furthermore, the method could be established using only a small amount of measured data, which is useful for water quality monitoring on large spatial scales.展开更多
The delay compensation method plays an essential role in maintaining the stability and achieving accurate real-time hybrid simulation results. The effectiveness of various compensation methods in different test scenar...The delay compensation method plays an essential role in maintaining the stability and achieving accurate real-time hybrid simulation results. The effectiveness of various compensation methods in different test scenarios, however, needs to be quantitatively evaluated. In this study, four compensation methods （i.e., the polynomial extrapolation, the linear acceleration extrapolation, the inverse compensation and the adaptive inverse compensation） are selected and compared experimentally using a frequency evaluation index （FEI） method. The effectiveness of the FEI method is first verified through comparison with the discrete transfer fimction approach for compensation methods assuming constant delay. Incomparable advantage is further demonstrated for the FEI method when applied to adaptive compensation methods, where the discrete transfer function approach is difficult to implement. Both numerical simulation and laboratory tests with predefined displacements are conducted using sinusoidal signals and random signals as inputs. Findings from numerical simulation and experimental results demonstrate that the FEI method is an efficient and effective approach to compare the performance of different compensation methods, especially for those requiring adaptation of compensation parameters.展开更多
This paper is devoted to investigate the robust H∞sliding mode load frequency control(SMLFC) of multi-area power system with time delay. By taking into account stochastic disturbances induced by the integration of re...This paper is devoted to investigate the robust H∞sliding mode load frequency control(SMLFC) of multi-area power system with time delay. By taking into account stochastic disturbances induced by the integration of renewable energies,a new sliding surface function is constructed to guarantee the fast response and robust performance, then the sliding mode control law is designed to guarantee the reach ability of the sliding surface in a finite-time interval. The sufficient robust frequency stabilization result for multi-area power system with time delay is presented in terms of linear matrix inequalities(LMIs). Finally,a two-area power system is provided to illustrate the usefulness and effectiveness of the obtained results.展开更多
Optical spatial modulation （OSM） is a multiple-transmitter technique that can provide higher data rates with low system complexity as compared with single-input single-output systems. Orthogonal frequency division m...Optical spatial modulation （OSM） is a multiple-transmitter technique that can provide higher data rates with low system complexity as compared with single-input single-output systems. Orthogonal frequency division multiplexing （OFDM） is widely implemented to achieve better spectral efficiency in wireless channels. Asymmetrically clipped optical OFDM （O-OFDM） and DC-biased O-OFDM are two well-known O-OFDM techniques suitable for intensity-modulation direct-detection optical systems. In this work, sample indexed spatial OFDM （SIS-OFDM） is proposed to combine OSM and O-OFDM in a novel way and achieve significant per- formance gain. By assigning time-domain samples of the O-OFDM transmit symbol to different transmitters, SIS-OFDM achieves much better spectral efficiency and reduces computational complexity at the transmitter as compared with previous work that combines OSM with O-OFDM in the frequency domain. We also consider the impact of optical source biasing on overall performance, and the relative performance of imaging receiver （ImR） versus non-imaging receiver （NImR） design for our proposed SIS-OFDM technique. Results indicate that for an Ntx x Nrx multiple-input multiple-output configuration where Nix = N = 4, SIS-OFDM using ImR can achieve up to 135 dB of signal-to-noise ratio gain over comparable system using a NImR. Also, using Nc number of O-OFDM subcarriers provides up to Nsc × log2（Ntx） additional bits per symbol of spectral efficiency over technioues that combine OSM and O-OFDM in the freollencv domain.展开更多
基金Under the auspices of National Key Research and Development Project of China (No. 2021YFB3901101)National Natural Science Foundation of China (No. 41971322, 42071336, 42001311, 41730104)+2 种基金Jilin Provincial Science and Technology Development Project (No. 20180519021JH)Youth Innovation Promotion Association of Chinese Academy of Sciences (No. 2020234)China Postdoctoral Science Foundation (No. 2020M681057)。
文摘Algal blooms in lakes have become a common global environmental problem. Nowadays, remote sensing is widely used to monitor algal blooms in lakes due to the macroscopic, fast, real-time characteristics. However, it is often difficult to distinguish between algal blooms and aquatic vegetation due to their similar spectral characteristics. In this paper, we used modified vegetation presence frequency index(VPF) based on Moderate-resolution Imaging Spectroradiometer(MODIS) imagery to distinguish algal blooms from aquatic vegetation, and analyzed the spatial and temporal variations of algal blooms and aquatic vegetation from a phenological perspective for five large natural lakes with frequent algal bloom outbreaks in China from 2019 to 2020. We simplified the VPF method to make it with a higher spatial transferability so that it could be applied to other lakes in different climatic zones. Through accuracy validation, we found that the modified VPF method can effectively distinguish between algal blooms and aquatic vegetation, and the results vary from lake to lake. The highest accuracy of 97% was achieved in Hulun Lake, where the frequency of algal outbreaks is low and the extent of aquatic vegetation is stable, while the lowest accuracy of 76% was achieved in Dianchi Lake, which is rainy in summer and the lake is small. Analyses suggests that the time period when algal blooms occur most frequently might not coincide with that when they have the largest area. However, in most cases these two are close in terms of time period. The modified VPF method has a broad scope of application, is easy to implement, and has a high practical value. Furthermore, the method could be established using only a small amount of measured data, which is useful for water quality monitoring on large spatial scales.
基金National Natural Science Foundation of China under Grant No.51378107the Fundamental Research Funds for the Central Universities and Priority Academic Program Development of Jiangsu Higher Education Institutions under Grant No.KYLX-0158the National Natural Science Foundation under Grant No.CMMI-1227962
文摘The delay compensation method plays an essential role in maintaining the stability and achieving accurate real-time hybrid simulation results. The effectiveness of various compensation methods in different test scenarios, however, needs to be quantitatively evaluated. In this study, four compensation methods （i.e., the polynomial extrapolation, the linear acceleration extrapolation, the inverse compensation and the adaptive inverse compensation） are selected and compared experimentally using a frequency evaluation index （FEI） method. The effectiveness of the FEI method is first verified through comparison with the discrete transfer fimction approach for compensation methods assuming constant delay. Incomparable advantage is further demonstrated for the FEI method when applied to adaptive compensation methods, where the discrete transfer function approach is difficult to implement. Both numerical simulation and laboratory tests with predefined displacements are conducted using sinusoidal signals and random signals as inputs. Findings from numerical simulation and experimental results demonstrate that the FEI method is an efficient and effective approach to compare the performance of different compensation methods, especially for those requiring adaptation of compensation parameters.
基金supported in part by the National Natural Science Foundation of China(61673161)the Natural Science Foundation of Jiangsu Province of China(BK20161510)+2 种基金the Fundamental Research Funds for the Central Universities of China(2017B13914)the 111 Project(B14022)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘This paper is devoted to investigate the robust H∞sliding mode load frequency control(SMLFC) of multi-area power system with time delay. By taking into account stochastic disturbances induced by the integration of renewable energies,a new sliding surface function is constructed to guarantee the fast response and robust performance, then the sliding mode control law is designed to guarantee the reach ability of the sliding surface in a finite-time interval. The sufficient robust frequency stabilization result for multi-area power system with time delay is presented in terms of linear matrix inequalities(LMIs). Finally,a two-area power system is provided to illustrate the usefulness and effectiveness of the obtained results.
基金supported by the Engineering Research Centers Program of the National Science Foundation under Grant No.EEC-0812056
文摘Optical spatial modulation （OSM） is a multiple-transmitter technique that can provide higher data rates with low system complexity as compared with single-input single-output systems. Orthogonal frequency division multiplexing （OFDM） is widely implemented to achieve better spectral efficiency in wireless channels. Asymmetrically clipped optical OFDM （O-OFDM） and DC-biased O-OFDM are two well-known O-OFDM techniques suitable for intensity-modulation direct-detection optical systems. In this work, sample indexed spatial OFDM （SIS-OFDM） is proposed to combine OSM and O-OFDM in a novel way and achieve significant per- formance gain. By assigning time-domain samples of the O-OFDM transmit symbol to different transmitters, SIS-OFDM achieves much better spectral efficiency and reduces computational complexity at the transmitter as compared with previous work that combines OSM with O-OFDM in the frequency domain. We also consider the impact of optical source biasing on overall performance, and the relative performance of imaging receiver （ImR） versus non-imaging receiver （NImR） design for our proposed SIS-OFDM technique. Results indicate that for an Ntx x Nrx multiple-input multiple-output configuration where Nix = N = 4, SIS-OFDM using ImR can achieve up to 135 dB of signal-to-noise ratio gain over comparable system using a NImR. Also, using Nc number of O-OFDM subcarriers provides up to Nsc × log2（Ntx） additional bits per symbol of spectral efficiency over technioues that combine OSM and O-OFDM in the freollencv domain.
