Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction ...Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction lining and wire rope.Then we carried out a dynamic mechanical analysis(DMA) to explain the change in mechanical properties of the friction lining as function of temperature and load frequency and found that temperature has a stronger effect on the mechanical properties than the frequency.We used multiple regression analysis to obtain the thermoviscoelastic constitutive relations of the friction lining.As well we derived the analytic solution for the thermoviscoelastic contact radius and pressure by combining the theory of viscoelastic contact mechanics with thermoviscoelastic constitutive relations.展开更多
The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental ...The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental verification are studied.First,considering the stick-slip phenomenon in the clutch engagement process,a detailed 9-degrees-of-freedom(DOF)model including the body,each cylinder of the engine,clutch and friction lining,torsional damper,transmission and other driveline parts is established,and the calculation formula of friction torque in the clutch engagement process is determined.Second,the influence of the friction gradient characteristics on the amplification or attenuation of the automobile friction judder is analyzed,and the corresponding stability analysis and the numerical simulation of different friction gradient values are carried out with MATLAB/Simulink software.Finally,judder bench test equipment and a corresponding damping test program are developed,and the relationship between the friction coefficient gradient characteristics and the system damping is analyzed.After a large number of tests,the evaluation basis of the test is determined.The research results show that the friction lining with negative gradient characteristics of the friction coefficient will have a judder signal.When the friction gradient value is less than-0.005 s/m,the judder signal of the measured clutch cannot be completely attenuated,and the judder phenomenon occurs.When the friction gradient is greater than-0.005 s/m,the judder signal can be significantly suppressed and the system connection tends to be stable.展开更多
The band conveyer driven by linear friction is a new device. It can reduce drivesize and conveyor belt tensity, and increase delivery capacity. It has feasibility and usability particularly in altering the original co...The band conveyer driven by linear friction is a new device. It can reduce drivesize and conveyor belt tensity, and increase delivery capacity. It has feasibility and usability particularly in altering the original conveyer and solving the problems of capacity insufficiency. The technology has brought certain difficulty for engineers, because it has certaindifficulty both in theory and in calculation. Therefore, Visual Basic 6.0 programming technology was used to develop a set of 'the design system of the band conveyer driven bylinear friction.' After being proved in the field, it can completely meet the demands of thedesign. This paper introduced its main theory or basis in design, so as to provide relatedtechnical support to this kind of project.展开更多
Wet multi-plate clutches are relevant components of modern drivetrain applications,not only in terms of function but also safety and comfort.Especially at the beginning of their lifetime,distinct changes of the fricti...Wet multi-plate clutches are relevant components of modern drivetrain applications,not only in terms of function but also safety and comfort.Especially at the beginning of their lifetime,distinct changes of the friction behavior may occur and make the actuation of the clutch challenging.This transcript describes the typical running-in behavior of wet multi-plate clutches and gives a general definition for running-in of clutches.Moreover,a new test method to systematically investigate the running-in behavior of clutches is introduced.This test method contains a test procedure to characterize the running-in behavior on different load levels.Furthermore,a multi-stage procedure to evaluate and characterize the running-in behavior of clutches with mathematical approaches and new characteristic values is given.The quality of the test method is demonstrated on the example of three different tribological systems from dual clutch transmissions(DCT)and automatic transmissions(AT)application using paper friction linings.展开更多
This paper studies the regression of a numerical two-dimensional flat plate friction line using the RANS method with the SST k - co turbulence model. Numerical simulations with different inlet turbulence kinetic energ...This paper studies the regression of a numerical two-dimensional flat plate friction line using the RANS method with the SST k - co turbulence model. Numerical simulations with different inlet turbulence kinetic energies are first conducted. Comparing with the experimental data, the finest grid and the appropriate inlet turbulence kinetic energy are selected to compute the fiat plate friction resistance at 14 Reynolds numbers. Two numerical friction lines are obtained by the least squares root fitting method and one similar to that of the ITTC-1957 line and the cubic polynomials in logarithmic scales, and the results are compared to the friction line proposals available in the open literature. Finally, the full scale viscous resistance predictions of DTMB5415, KVLCC2, SUBOFF are compared between the numerical friction line and the friction line proposals available in the open literature based on the form factor approach. It is shown that the form factor keeps relatively constant via the numerical friction line for the bare hull, but the form factor concept in extrapolating the model test results is not appropriate for appended hulls. It is suggested that for computing a form factor numerically, it is best to use a numerical friction line.展开更多
基金Projects 50875253 supported by the National Natural Science Foundation of China20060290505 by the Research Fund for the Doctoral Program of Higher Education of China+2 种基金107054 by the Key Project of Ministry of Education of ChinaBK2008127 by the Natural Science Foundation of Jiangsu ProvinceCX08B_042Z by the Scientific Innovation Program for Postgraduates in Colleges and Universities of Jiangsu Province
文摘Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction lining and wire rope.Then we carried out a dynamic mechanical analysis(DMA) to explain the change in mechanical properties of the friction lining as function of temperature and load frequency and found that temperature has a stronger effect on the mechanical properties than the frequency.We used multiple regression analysis to obtain the thermoviscoelastic constitutive relations of the friction lining.As well we derived the analytic solution for the thermoviscoelastic contact radius and pressure by combining the theory of viscoelastic contact mechanics with thermoviscoelastic constitutive relations.
基金Supported by National Natural Science Foundation of China (Grant No.51775249)。
文摘The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental verification are studied.First,considering the stick-slip phenomenon in the clutch engagement process,a detailed 9-degrees-of-freedom(DOF)model including the body,each cylinder of the engine,clutch and friction lining,torsional damper,transmission and other driveline parts is established,and the calculation formula of friction torque in the clutch engagement process is determined.Second,the influence of the friction gradient characteristics on the amplification or attenuation of the automobile friction judder is analyzed,and the corresponding stability analysis and the numerical simulation of different friction gradient values are carried out with MATLAB/Simulink software.Finally,judder bench test equipment and a corresponding damping test program are developed,and the relationship between the friction coefficient gradient characteristics and the system damping is analyzed.After a large number of tests,the evaluation basis of the test is determined.The research results show that the friction lining with negative gradient characteristics of the friction coefficient will have a judder signal.When the friction gradient value is less than-0.005 s/m,the judder signal of the measured clutch cannot be completely attenuated,and the judder phenomenon occurs.When the friction gradient is greater than-0.005 s/m,the judder signal can be significantly suppressed and the system connection tends to be stable.
基金Supported by the Beijing Important Constructive Subject of Processing and Storage of Agriculture Products ( PXM2009-014207-078172 )
文摘The band conveyer driven by linear friction is a new device. It can reduce drivesize and conveyor belt tensity, and increase delivery capacity. It has feasibility and usability particularly in altering the original conveyer and solving the problems of capacity insufficiency. The technology has brought certain difficulty for engineers, because it has certaindifficulty both in theory and in calculation. Therefore, Visual Basic 6.0 programming technology was used to develop a set of 'the design system of the band conveyer driven bylinear friction.' After being proved in the field, it can completely meet the demands of thedesign. This paper introduced its main theory or basis in design, so as to provide relatedtechnical support to this kind of project.
基金The presented results are based on the research project FVA no.343/Ⅲ undertaken by the Research Association for Drive Technology e.V.(FVA).
文摘Wet multi-plate clutches are relevant components of modern drivetrain applications,not only in terms of function but also safety and comfort.Especially at the beginning of their lifetime,distinct changes of the friction behavior may occur and make the actuation of the clutch challenging.This transcript describes the typical running-in behavior of wet multi-plate clutches and gives a general definition for running-in of clutches.Moreover,a new test method to systematically investigate the running-in behavior of clutches is introduced.This test method contains a test procedure to characterize the running-in behavior on different load levels.Furthermore,a multi-stage procedure to evaluate and characterize the running-in behavior of clutches with mathematical approaches and new characteristic values is given.The quality of the test method is demonstrated on the example of three different tribological systems from dual clutch transmissions(DCT)and automatic transmissions(AT)application using paper friction linings.
基金supported by the National Natural Science Foundation of China(Grant No.51179198,51479207)the High Technology Marine Scientific Research Project of Ministry of Industry and Information Technology of China(Grant No.[2012]534)
文摘This paper studies the regression of a numerical two-dimensional flat plate friction line using the RANS method with the SST k - co turbulence model. Numerical simulations with different inlet turbulence kinetic energies are first conducted. Comparing with the experimental data, the finest grid and the appropriate inlet turbulence kinetic energy are selected to compute the fiat plate friction resistance at 14 Reynolds numbers. Two numerical friction lines are obtained by the least squares root fitting method and one similar to that of the ITTC-1957 line and the cubic polynomials in logarithmic scales, and the results are compared to the friction line proposals available in the open literature. Finally, the full scale viscous resistance predictions of DTMB5415, KVLCC2, SUBOFF are compared between the numerical friction line and the friction line proposals available in the open literature based on the form factor approach. It is shown that the form factor keeps relatively constant via the numerical friction line for the bare hull, but the form factor concept in extrapolating the model test results is not appropriate for appended hulls. It is suggested that for computing a form factor numerically, it is best to use a numerical friction line.
