The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification proc...The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.展开更多
Selenium nanoparticles(SeNPs)have been demonstrated potential for use in diseases associated with oxidative stress.Functionalized SeNPs with lower toxicity and higher biocompatibility could bring better therapeutic ac...Selenium nanoparticles(SeNPs)have been demonstrated potential for use in diseases associated with oxidative stress.Functionalized SeNPs with lower toxicity and higher biocompatibility could bring better therapeutic activity and clinical application value.Herein,this work was conducted to investigate the protective effect of Pleurotus tuber-regium polysaccharide-protein complex funtionnalized SeNPs(PTR-SeNPs)against acetaminophen(APAP)-induced oxidative injure in HepG2 cells and C57BL/6J mouse liver.Further elucidation of the underlying molecular mechanism,in particular their modulation of Nrf2 signaling pathway was also performed.The results showed that PTR-SeNPs could significantly ameliorate APAP-induced oxidative injury as evidenced by a range of biochemical analysis,histopathological examination and immunoblotting study.PTR-SeNPs could hosphorylate and activate PKCδ,depress Keap1,and increase nuclear accumulation of Nrf2,resulting in upregulation of GCLC,GCLM,HO-1 and NQO-1 expression.Besides,PTR-SeNPs suppressed the biotransformation of APAP to generate intracellular ROS through CYP 2E1 inhibition,restoring the mitochondrial morphology.Furthermore,the protective effect of PTR-SeNPs against APAP induced hepatotoxicity was weakened as Nrf2 was depleted in vivo,indicating the pivotal role of Nrf2 signaling pathway in PTR-SeNPs mediated hepatoprotective efficacy.Being a potential hepatic protectant,PTR-SeNPs could serve as a new source of selenium supplement for health-promoting and biomedical applications.展开更多
Lithium metal batteries(LMBs)have attracted wide attentions because of their high theoretical specific capacity and low electrochemical potential.However,the growth of lithium dendrites seriously affects the practical...Lithium metal batteries(LMBs)have attracted wide attentions because of their high theoretical specific capacity and low electrochemical potential.However,the growth of lithium dendrites seriously affects the practical application of LMBs.Thus,the lithium-philic carbonyl and carboxy dualgroup-modified covalent organic framework(COF-COOH)is designed to coat the polypropylene(PP)separator(COF-COOH@PP separator),realizing the regulation of ion transport and uniform lithium deposition.The plentiful and negative charge sites in the COF-COOH can suppress the diffusion of the freely movable lithium salt anion by the electrostatic interaction.Density functional theory(DFT)calculations demonstrate that the COF-COOH possesses the function of anchoring anion and desolvation.Consequently,the Li^(+)transference number(0.7),ion conductivity(0.64 mS cm^(-1)),and desolvating of Li^(+)are obviously improved by using the COF-COOH@PP separator.The modified Li-Li symmetric battery delivers stable cycle for more than 1000 h and lower voltage hysteresis(0.02 V).This dendrite-free deposition strategy holds great promise for practical application of Li metal anodes.展开更多
Lithium-rich manganese-based materials(LRMs) are promising cathode for high-energy-density lithiumion batteries due to their high capacity,low toxicity,and low cost.However,LRMs suffer from serious voltage decay and c...Lithium-rich manganese-based materials(LRMs) are promising cathode for high-energy-density lithiumion batteries due to their high capacity,low toxicity,and low cost.However,LRMs suffer from serious voltage decay and capacity fade due to continual migration and dissolution of transition metal ions(TMs) during cycling process.Herein,a novel strategy is proposed to inhibit the TMs migration of LRMs through a modified separator by means of functionalized carbon coating layer,which depends on the chemical constraint of the abundant functional groups in the modified super P.In addition,it has been found that the dissolution of TMs can be restrained based on the Le Chatelier's principle.Moreover,the modified separator owns good wettability toward the electrolyte.As a result,the LRMs cathode with the modified separator delivers a high discharge capacity of 329.93 mA h g-1 at 0.1 C,and achieves good cyclic performance,the enhanced reaction kinetics and low voltage decay.Therefore,this work provides a new idea to promote the comprehensive electrochemical performances of Li-ion batteries with LRMs cathode through a strategy of separator modification.展开更多
Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to ...Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks,and for the early detection and treatment of diseases for home healthcare.Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable.Functionalized hydrogels are intrinsically conductive,self-healing,self-adhesive,biocompatible,and room-temperature sensitive.Compared with traditional rigid vapor sensors,hydrogel-based gas and humidity sensors can directly fit human skin or clothing,and are more suitable for real-time monitoring of personal health and safety.In this review,current studies on hydrogel-based vapor sensors are investigated.The required properties and optimization methods of wearable hydrogel-based sensors are introduced.Subsequently,existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized.Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented.Moreover,the potential of hydrogels in the field of vapor sensing is elucidated.Finally,the current research status,challenges,and future trends of hydrogel gas/humidity sensing are discussed.展开更多
To better understand the role of the-NH_(2)group in adsorption process of phenolic wastewaters,NH_(2)-functionalized MIL-53(Al)composites with activated carbon(NH_(2)-M(Al)@(B)AC)were prepared.The results showed that ...To better understand the role of the-NH_(2)group in adsorption process of phenolic wastewaters,NH_(2)-functionalized MIL-53(Al)composites with activated carbon(NH_(2)-M(Al)@(B)AC)were prepared.The results showed that the-NH_(2)group could increase the mesopore volume for composites,which promotes mass transfer and full utilization of active sites,because hierarchical mesopore structure makes the adsorbent easier to enter the internal adsorption sites.Furthermore,the introduction of the-NH_(2)group can improve the adsorption capacity,decrease the activation energy,and enhance the interaction between the adsorbent and p-nitrophenol,demonstrating that the-NH_(2)group plays a crucial role in the adsorption of p-nitrophenol.The density functional theory calculation results show that the H-bond interaction between the-NH_(2)group in the adsorbent and the-NO_(2)in the p-nitrophenol(adsorption energy of -35.5 kJ·mol^(-1)),and base-acid interaction between the primary-NH_(2)group in the adsorbent and the acidic-OH group in the p-nitrophenol(adsorption energy of -27.3 kJ·mol^(-1))are predominant mechanisms for adsorption in terms of the NH_(2)-functionalized adsorbent.Both NH_(2)-functionalized M(Al)@AC and M(Al)@BAC composites exhibited higher p-nitrophenol adsorption capacity than corresponding nonfunctionalized composites.Among the composites,the NH_(2)-M(Al)@BAC had the highest p-nitrophenol adsorption capacity of 474 mg·g^(-1).展开更多
The lithium-sulfur(Li-S)battery,as one of the energy storage devices,has been in the limelight due to its high theoretical energy density.However,the poor redox kinetics and the"shuttle effect"of polysulfide...The lithium-sulfur(Li-S)battery,as one of the energy storage devices,has been in the limelight due to its high theoretical energy density.However,the poor redox kinetics and the"shuttle effect"of polysulfides severely restrict the use of Li-S batteries in practical applications.Herein,a novel bimetallic LaNiO_(3) functional material with high electrical conductivity and catalytic property is prepared to act as a high-efficiency polysulfide shuttling stopper.The three LaNiO_(3) samples with different physical/chemical characteristics are obtained by controlling the calcination temperature.In conjunction with the high electrical conductivity and excellent catalytic properties of the as-prepared materials,the appropriate chemisorption toward polysulfides offers great potential to enhance electrochemical stability for highperformance Li-S batteries.Particularly,the Li-S cell with the separator modified by such functional material gives a specific capacity of 658 mA h g^(-1) after 500 cycles at a high current density of 2 C.Even with high sulfur loading of 6.05 mg cm^(-2),the Li-S battery still exhibits an areal specific capacity of 2.81 m A h cm^(-2)after 150 cycles.This work paves a new avenue for the rational design of materials for separator modification in high-performance Li-S batteries.展开更多
Using porous carbon hosts in cathodes of Li-S cells can disperse S actives and offset their poor electrical conductivity.However,such reservoirs would in turn absorb excess electrolyte solvents to S-unfilled regions,c...Using porous carbon hosts in cathodes of Li-S cells can disperse S actives and offset their poor electrical conductivity.However,such reservoirs would in turn absorb excess electrolyte solvents to S-unfilled regions,causing the electrolyte overconsumption,specific energy decline,and even safety hazards for battery devices.To build better cathodes,we propose to substitute carbons by In-doped SnO_(2)(ITO)nano ceramics that own three-in-one functionalities:1)using conductive ITO enables minimizing the total carbon content to an extremely low mass ratio(~3%)in cathodes,elevating the electrode tap density and averting the electrolyte overuse;2)polar ITO nanoclusters can serve as robust anchors toward Li polysulfide(LiPS)by electrostatic adsorption or chemical bond interactions;3)they offer catalysis centers for liquid–solid phase conversions of S-based actives.Also,such ceramics are intrinsically nonflammable,preventing S cathodes away from thermal runaway or explosion.These merits entail our configured cathodes with high tap density(1.54 g cm^(−3)),less electrolyte usage,good security for flame retardance,and decent Li-storage behaviors.With lean and LiNO_(3)-free electrolyte,packed full cells exhibit excellent redox kinetics,suppressed LiPS shuttling,and excellent cyclability.This may trigger great research enthusiasm in rational design of low-carbon and safer S cathodes.展开更多
A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids....A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids. A great number of materials have potential to be used in nanoparticles production and then in nanofluids;one of them is Multi-Walled Carbon Nano Tubes (MWCNT). They have thermal conductivity around 3000 W/mK while other materials used as nanoparticles like CuO have thermal conductivity of 76.5 W/mK. Due to this fact, MWCNT nanoparticles have potential to be used in nanofluids production, aiming to increase heat transfer rate in energy systems. In this context, the main goal of this paper is to evaluate from the synthesis to the experimental measurement of thermal conductivity of nanofluid samples based on functionalized (-OH) MWCNT nanoparticles. They will be analyzed nanoparticles with different functionalization degrees (4% wt, 6% wt, and 9% wt). In addition, it will be quantified other thermophysical properties (dynamic viscosity, specific heat and specific mass) of the synthetized nanofluids. So, the present work can contribute with experimental data that will help researches in the study and development of MWCNT nanofluids. According to the results, the maximum increment obtained in thermal conductivity was 10.65% in relation to the base fluid (water).展开更多
Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized a...Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO_(2)emissions due to their large CO_(2)adsorption amount,excellent CO_(2)adsorption selectivity and lower energy requirements for adsorbent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO_(2)capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.展开更多
The nanophotocatalysts were synthesized in four stages and evaluated by FTIR, FESEM and VSM analysis. The influence of nanofluids containing functionalized magnetic Ti O2 nanophotocatalyst and dipalmitoylphosphatidylc...The nanophotocatalysts were synthesized in four stages and evaluated by FTIR, FESEM and VSM analysis. The influence of nanofluids containing functionalized magnetic Ti O2 nanophotocatalyst and dipalmitoylphosphatidylcholine lecithin in drag reduction of turbulent flow in four horizontal pipelines was studied. The effective parameters on drag reduction(nanoparticle concentration, surfactant concentration, p H and Re number) were investigated and optimized in each pipeline using response surface method. The drag reduction in 1/2 " galvanized, 3/4" galvanized, 1/2 "five-layer and 1/2" cuprous pipelines was found 99.1%, 92.5%, 87.6% and 85.2%, respectively. The model adequacy was measured using ANOVA. Based on the high determination coefficient, more than 95% of variance of experimental data in all pipelines was described by quadratic model.展开更多
Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic c...Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic condition. Herein, a novel non-covalent surface modification approach towards graphene oxide was conducted via a UV-induced photo-polymerization technique that involves two major routes; a UV-sensitive initiator embedded via pi-pi interactions on the graphene planar rings, and the polymerization of hydrophobic polymeric chains along the surface. The functionalized graphene oxide successfully achieved the desired hydrophobicity as it displayed the characteristic of being readily dissolved in organic solvent. Upon its addition into a polymeric solution and subjected to an electrospinning process,non-woven random nanofibers embedded with graphene oxide sheets were obtained. The prepared polymeric nanofibers were subjected to two-step thermal treatments that eventually converted the polymeric chains into a carbon-rich conductive structure. A unique morphology was observed upon the addition of the functionalized graphene oxide, whereby the sheets were embedded and intercalated within the carbon nanofibers and formed a continuous structure. This reinforcement effectively enhanced the electrochemical performance of the carbon nanofibers by recording a specific capacitance of up to 140.10 F/g at the current density of 1 A/g, which was approximately three folds more than that of pristine nanofibers.It also retained the capacitance up to 96.2% after 1000 vigorous charge/discharge cycles. This functionalization technique opens up a new pathway in tuning the solubility nature of graphene oxide towards the synthesis of a graphene oxide-reinforced polymeric structure.展开更多
Functionalized graphene nano-platelets(FGN) were obtained via treating graphene nanoplatelets(GN) with HNO_3, and served as adsorbent for the removal of Pb^(2+) from solutions. We investigated the FGN adsorption capac...Functionalized graphene nano-platelets(FGN) were obtained via treating graphene nanoplatelets(GN) with HNO_3, and served as adsorbent for the removal of Pb^(2+) from solutions. We investigated the FGN adsorption capacity for Pb^(2+) at different initial concentrations, varying pH, contact time and temperature. The characterization results of scanning electron microscopy(SEM), thermal analysis(TG/DTG), Fourier transform infrared spectroscopy(FT-IR) and Brunauer-Emmett-Teller(BET) method indicated that FGN layers were thin and possess large specific area with oxygen-containing functional groups grafted onto their surface. Meanwhile, the determined equilibrium adsorption capacity of FGN for Pb^(2+) was 57.765 mg/g and adsorption isotherms well confirmed to Langmuir isotherms models. The results reveals that the FGN has better effect of water treatment.展开更多
Articular cartilage(AC)is an avascular and flexible connective tissue located on the bone surface in the diarthrodial joints.AC defects are common in the knees of young and physically active individuals.Because of the...Articular cartilage(AC)is an avascular and flexible connective tissue located on the bone surface in the diarthrodial joints.AC defects are common in the knees of young and physically active individuals.Because of the lack of suitable tissue-engineered artificial matrices,current therapies for AC defects,espe-cially full-thickness AC defects and osteochondral interfaces,fail to replace or regenerate damaged carti-lage adequately.With rapid research and development advancements in AC tissue engineering(ACTE),functionalized hydrogels have emerged as promising cartilage matrix substitutes because of their favor-able biomechanical properties,water content,swelling ability,cytocompatibility,biodegradability,and lubricating behaviors.They can be rationally designed and conveniently tuned to simulate the extracel-lular matrix of cartilage.This article briefly introduces the composition,structure,and function of AC and its defects,followed by a comprehensive review of the exquisite(bio)design and(bio)fabrication of func-tionalized hydrogels for AC repair.Finally,we summarize the challenges encountered in functionalized hydrogel-based strategies for ACTE both in vivo and in vitro and the future directions for clinical translation.展开更多
Biodiesel is an attractive alternative to fossil fuels due to the energy and environmental concerns. In this paper, seven different multi –SO_(3)H functionalized ILs based on the low-cost less-substituted amines, whi...Biodiesel is an attractive alternative to fossil fuels due to the energy and environmental concerns. In this paper, seven different multi –SO_(3)H functionalized ILs based on the low-cost less-substituted amines, which contained massive sites for functionalization of sulfonic acid groups and further treatment of sulfonate-based anions, were prepared as catalysts with high acidity and desirable catalytic activity for the synthesis of biodiesel from the esterification of oleic acid with methanol. The physicochemical properties of these acidic ILs were characterized by a variety of analytical techniques such as FT-IR, EA, TGA, and the Br?nsted acidity was well determined by UV–vis. Among the ILs prepared, [EDA-PS][P-TSA] showed the highest catalytic activity for esterification due to its high acidity and appropriate miscibility with reactants, with an ultrahigh97.58% conversion of oleic acid under the optimum conditions(i.e. reaction time, 1.8 h;catalyst amount, 3 wt%;alcohol/acid molar ratio, 13:1,temperature 70℃) acquired from the Box–Behnken response surface methodology. With the novel strategy of multi –SO_(3) H modification on ILs,our catalyst had an approaching or even superior oleic acid conversion rate compared to other reported catalysts with considerably lower catalyst dosage and shorter reaction time. More importantly, it also exhibited high generality for converting various FFA feedstocks into biodiesel with considerable conversion within 93.59–94.33% under a rather lower catalyst dosage, which showed the valuable potential for converting low-cost oils into biodiesel from an economic and environmental perspective.展开更多
A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16-dihydroxy-1- thia ...A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16-dihydroxy-1- thia - 5, 8, 11, 14- tetraoxacycloheptadecane via etheritication with ω-chloroundecene, followed by hydrosilylation with triethoxysilane, cohydrolysis with D<sub>4</sub>, sequentially. Treating the polysiloxane with potassium cholroplatinite, the title complex was obtained. It was found that the platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.展开更多
A modified method of preparing crown functionalized linear polysiloxane has been described.4’-allylbenzo-15-crown-5 was subjected to hydrosilylation with methyldichlorosilane,followed bypolycondensation with silanol-...A modified method of preparing crown functionalized linear polysiloxane has been described.4’-allylbenzo-15-crown-5 was subjected to hydrosilylation with methyldichlorosilane,followed bypolycondensation with silanol-terminated polydimethylsiloxane to give the title crownfunctionalized linear polysiloxane. It was found that the polysiloxane could be coordinated withplatinum salt to form platinum complex, which could catalyze the hydrosilylation of olefins withtriethoxysilane efficiently.展开更多
Nanocomposite cation exchange membranes(CEMs) were prepared by adding various loadings of functionalized silica nanoparticles to the sulfonated polyethersulfone(s PES) polymeric matrix. The silica nanoparticles were f...Nanocomposite cation exchange membranes(CEMs) were prepared by adding various loadings of functionalized silica nanoparticles to the sulfonated polyethersulfone(s PES) polymeric matrix. The silica nanoparticles were functionalized by mercaptopropyl(F_1, IEC=0), propylsulfonic acid(F_2, IEC= 2.71), and sulfonic acid(F_3, IEC=2.84). The properties of prepared membranes were investigated by varying the loadings of functionalized silica nanoparticles. Applying functionalized nanoparticles provides additional ion exchange groups and enhances water contents as well as conductivities and permselectivities of the membranes. The maximum IEC of 1.9 meq.g^(-1) was obtained for the membrane having 3 wt% F_3 nanoparticles and the maximum conductivity of 0.237 S·cm^(-1) was achieved for the membrane having 2 wt% F_3 nanoparticles, which were 19.6% and 64% higher than the corresponding values for s PES membrane, respectively. The excellent properties of the nanocomposite cation-exchange membranes make them appropriate candidates for electrodialysis and desalination processes.展开更多
The society’s urgent demand for environmentally friendly, safe and low-cost energy storage devices has promoted the research of aqueous zinc-ion batteries. However, the uneven deposition of Zn ions on anodes will lea...The society’s urgent demand for environmentally friendly, safe and low-cost energy storage devices has promoted the research of aqueous zinc-ion batteries. However, the uneven deposition of Zn ions on anodes will lead to the growth of the dendrite and reduce the Coulombic efficiency as well as the lifespan of the devices. Herein, we construct an O,N-dual functionalized carbon cloth current collector via a simple hydrothermal strategy, in which the oxygen-containing functional groups and the N heteroatoms can regulate the transmission and deposition of Zn ions, respectively. The proposed synergistic strategy ensures the uniform distribution of Zn ions on the surface of the Zn anode and inhibits the formation of dendrites. The symmetric cell based on the O,N-dual doped carbon cloth presents superior cycling stability(318 h) with a low voltage hysteresis(11.2 mV) at an areal capacity of 1 m Ah cm^(-2)(20% depth of diacharge). Meanwhile, the appreciably low overpotential(16 m V) and high Columbic efficiency(98.2%)also demonstrate that the O,N-dual functionalized carbon cloth can be worked as a promising host for Zn ions deposition.展开更多
An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immob...An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immobilized on the sol-gel derived silica, which is superior to purely viscous ionic liquid with a crucial limit of high temperature, low mass transfer rate,and mass loss. The adsorbents were characterized by the Fourier transform infrared spectrometer, transmission electron microscope, N_2 adsorption/desorption, X-ray photoelectron spectroscopy, and thermal analysis techniques. The effects of the metal and halogen in IL, the loading amount of IL, and the adsorption temperature were studied by dynamic adsorption experiments at a gas flow rate of 100 mL/min. The H2 S adsorption results have showed that the optimal adsorbent and adsorption temperature are 5% [Bmim]Cl·CuCl_2/silica gel and 20—50 ℃, respectively. H_2 S can be captured and oxidized to elemental sulfur, and [Bmim]Cl·CuCl_2/silica gel can be readily regenerated by air. The excellent efficiency of H2 S removal may be attributed to the formation of nano-scaled and high-concentration [Bmim]Cl·CuCl_2 confined in silica gel, indicating that the immobilization of [Bmim]Cl·CuCl_2 on the sol-gel derived silica can be used for H2 S removal promisingly.展开更多
基金the National Natural Science Foundation of China(Grant number 51771178)Shaanxi Outstanding Youth Fund project(Grant number 2021JC-45)+2 种基金Key international cooperation projects in Shaanxi Province(Grant number 2020KWZ-007)the Major Program of Science and Technology in Shaanxi Province(Grant number20191102006)Open Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body(Grant number 32115019)。
文摘The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.
基金financially supported by National Natural Science Foundation of China(81700524)Natural Science Foundation of Fujian Province(2022J01866)from Fujian Provincial Department of Science and Technology+1 种基金Key Project of Fujian University of Traditional Chinese Medicine(X2021019)Collaborative Innovation and Platform Establishment Project of Department of Science and Technology of Guangdong Province(2019A050520003)。
文摘Selenium nanoparticles(SeNPs)have been demonstrated potential for use in diseases associated with oxidative stress.Functionalized SeNPs with lower toxicity and higher biocompatibility could bring better therapeutic activity and clinical application value.Herein,this work was conducted to investigate the protective effect of Pleurotus tuber-regium polysaccharide-protein complex funtionnalized SeNPs(PTR-SeNPs)against acetaminophen(APAP)-induced oxidative injure in HepG2 cells and C57BL/6J mouse liver.Further elucidation of the underlying molecular mechanism,in particular their modulation of Nrf2 signaling pathway was also performed.The results showed that PTR-SeNPs could significantly ameliorate APAP-induced oxidative injury as evidenced by a range of biochemical analysis,histopathological examination and immunoblotting study.PTR-SeNPs could hosphorylate and activate PKCδ,depress Keap1,and increase nuclear accumulation of Nrf2,resulting in upregulation of GCLC,GCLM,HO-1 and NQO-1 expression.Besides,PTR-SeNPs suppressed the biotransformation of APAP to generate intracellular ROS through CYP 2E1 inhibition,restoring the mitochondrial morphology.Furthermore,the protective effect of PTR-SeNPs against APAP induced hepatotoxicity was weakened as Nrf2 was depleted in vivo,indicating the pivotal role of Nrf2 signaling pathway in PTR-SeNPs mediated hepatoprotective efficacy.Being a potential hepatic protectant,PTR-SeNPs could serve as a new source of selenium supplement for health-promoting and biomedical applications.
基金financial support provided by the National Natural Science Foundation of China(52064049)the Key National Natural Science Foundation of Yunnan Province(2018FA028 and 2019FY003023)+2 种基金International Joint Research Center for Advanced Energy Materials of Yunnan Province(202003AE140001)Key Laboratory of Solid State Ions for Green Energy of Yunnan University(2019)the Analysis and Measurements Center of Yunnan University for the sample testing service.
文摘Lithium metal batteries(LMBs)have attracted wide attentions because of their high theoretical specific capacity and low electrochemical potential.However,the growth of lithium dendrites seriously affects the practical application of LMBs.Thus,the lithium-philic carbonyl and carboxy dualgroup-modified covalent organic framework(COF-COOH)is designed to coat the polypropylene(PP)separator(COF-COOH@PP separator),realizing the regulation of ion transport and uniform lithium deposition.The plentiful and negative charge sites in the COF-COOH can suppress the diffusion of the freely movable lithium salt anion by the electrostatic interaction.Density functional theory(DFT)calculations demonstrate that the COF-COOH possesses the function of anchoring anion and desolvation.Consequently,the Li^(+)transference number(0.7),ion conductivity(0.64 mS cm^(-1)),and desolvating of Li^(+)are obviously improved by using the COF-COOH@PP separator.The modified Li-Li symmetric battery delivers stable cycle for more than 1000 h and lower voltage hysteresis(0.02 V).This dendrite-free deposition strategy holds great promise for practical application of Li metal anodes.
基金supported financially by the National Natural Science Foundation of China (U19A2018)the Key Project of Strategic New Industry of Hunan Province (2019GK2032)+2 种基金the Natural Science Foundation of Hunan Province (2021JJ30651)the Science and Technology Program of Xiangtan (GX-ZD20211004)Postgraduate Scientific Research Innovation Project of Hunan Province (CX20210635)。
文摘Lithium-rich manganese-based materials(LRMs) are promising cathode for high-energy-density lithiumion batteries due to their high capacity,low toxicity,and low cost.However,LRMs suffer from serious voltage decay and capacity fade due to continual migration and dissolution of transition metal ions(TMs) during cycling process.Herein,a novel strategy is proposed to inhibit the TMs migration of LRMs through a modified separator by means of functionalized carbon coating layer,which depends on the chemical constraint of the abundant functional groups in the modified super P.In addition,it has been found that the dissolution of TMs can be restrained based on the Le Chatelier's principle.Moreover,the modified separator owns good wettability toward the electrolyte.As a result,the LRMs cathode with the modified separator delivers a high discharge capacity of 329.93 mA h g-1 at 0.1 C,and achieves good cyclic performance,the enhanced reaction kinetics and low voltage decay.Therefore,this work provides a new idea to promote the comprehensive electrochemical performances of Li-ion batteries with LRMs cathode through a strategy of separator modification.
基金Jin Wu acknowledges financial support from the National Natural Science Foundation of China(No.61801525)the Guangdong Basic and Applied Basic Research Foundation(No.2020A1515010693)+1 种基金the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.22lgqb17)the Independent Fund of the State Key Laboratory of Optoelectronic Materials and Technologies(Sun Yat-sen University)under grant No.OEMT-2022-ZRC-05.
文摘Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks,and for the early detection and treatment of diseases for home healthcare.Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable.Functionalized hydrogels are intrinsically conductive,self-healing,self-adhesive,biocompatible,and room-temperature sensitive.Compared with traditional rigid vapor sensors,hydrogel-based gas and humidity sensors can directly fit human skin or clothing,and are more suitable for real-time monitoring of personal health and safety.In this review,current studies on hydrogel-based vapor sensors are investigated.The required properties and optimization methods of wearable hydrogel-based sensors are introduced.Subsequently,existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized.Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented.Moreover,the potential of hydrogels in the field of vapor sensing is elucidated.Finally,the current research status,challenges,and future trends of hydrogel gas/humidity sensing are discussed.
基金supported by the National Natural Science Foundation of China(22008134)。
文摘To better understand the role of the-NH_(2)group in adsorption process of phenolic wastewaters,NH_(2)-functionalized MIL-53(Al)composites with activated carbon(NH_(2)-M(Al)@(B)AC)were prepared.The results showed that the-NH_(2)group could increase the mesopore volume for composites,which promotes mass transfer and full utilization of active sites,because hierarchical mesopore structure makes the adsorbent easier to enter the internal adsorption sites.Furthermore,the introduction of the-NH_(2)group can improve the adsorption capacity,decrease the activation energy,and enhance the interaction between the adsorbent and p-nitrophenol,demonstrating that the-NH_(2)group plays a crucial role in the adsorption of p-nitrophenol.The density functional theory calculation results show that the H-bond interaction between the-NH_(2)group in the adsorbent and the-NO_(2)in the p-nitrophenol(adsorption energy of -35.5 kJ·mol^(-1)),and base-acid interaction between the primary-NH_(2)group in the adsorbent and the acidic-OH group in the p-nitrophenol(adsorption energy of -27.3 kJ·mol^(-1))are predominant mechanisms for adsorption in terms of the NH_(2)-functionalized adsorbent.Both NH_(2)-functionalized M(Al)@AC and M(Al)@BAC composites exhibited higher p-nitrophenol adsorption capacity than corresponding nonfunctionalized composites.Among the composites,the NH_(2)-M(Al)@BAC had the highest p-nitrophenol adsorption capacity of 474 mg·g^(-1).
基金supported by the National Natural Science Foundation of China(51972184,22005169)the Key Basic Research Project of Shandong Province(ZR2019ZD49)+2 种基金the Natural Science Foundation of Shandong Province(ZR2020QB121)the Taishan Scholars Project of Shandong Provincethe Taishan Scholar Young Talent Program(tsqn201909114)。
文摘The lithium-sulfur(Li-S)battery,as one of the energy storage devices,has been in the limelight due to its high theoretical energy density.However,the poor redox kinetics and the"shuttle effect"of polysulfides severely restrict the use of Li-S batteries in practical applications.Herein,a novel bimetallic LaNiO_(3) functional material with high electrical conductivity and catalytic property is prepared to act as a high-efficiency polysulfide shuttling stopper.The three LaNiO_(3) samples with different physical/chemical characteristics are obtained by controlling the calcination temperature.In conjunction with the high electrical conductivity and excellent catalytic properties of the as-prepared materials,the appropriate chemisorption toward polysulfides offers great potential to enhance electrochemical stability for highperformance Li-S batteries.Particularly,the Li-S cell with the separator modified by such functional material gives a specific capacity of 658 mA h g^(-1) after 500 cycles at a high current density of 2 C.Even with high sulfur loading of 6.05 mg cm^(-2),the Li-S battery still exhibits an areal specific capacity of 2.81 m A h cm^(-2)after 150 cycles.This work paves a new avenue for the rational design of materials for separator modification in high-performance Li-S batteries.
基金support by the National Natural Science Foundation of China(51802269,21773138)Fundamental Research Funds for the Central Universities(XDJK2019AA002)+1 种基金the Venture&Innovation Support Program for Chongqing Overseas Returnees(cx2018027)the innovation platform for academicians of Hainan province.
文摘Using porous carbon hosts in cathodes of Li-S cells can disperse S actives and offset their poor electrical conductivity.However,such reservoirs would in turn absorb excess electrolyte solvents to S-unfilled regions,causing the electrolyte overconsumption,specific energy decline,and even safety hazards for battery devices.To build better cathodes,we propose to substitute carbons by In-doped SnO_(2)(ITO)nano ceramics that own three-in-one functionalities:1)using conductive ITO enables minimizing the total carbon content to an extremely low mass ratio(~3%)in cathodes,elevating the electrode tap density and averting the electrolyte overuse;2)polar ITO nanoclusters can serve as robust anchors toward Li polysulfide(LiPS)by electrostatic adsorption or chemical bond interactions;3)they offer catalysis centers for liquid–solid phase conversions of S-based actives.Also,such ceramics are intrinsically nonflammable,preventing S cathodes away from thermal runaway or explosion.These merits entail our configured cathodes with high tap density(1.54 g cm^(−3)),less electrolyte usage,good security for flame retardance,and decent Li-storage behaviors.With lean and LiNO_(3)-free electrolyte,packed full cells exhibit excellent redox kinetics,suppressed LiPS shuttling,and excellent cyclability.This may trigger great research enthusiasm in rational design of low-carbon and safer S cathodes.
文摘A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids. A great number of materials have potential to be used in nanoparticles production and then in nanofluids;one of them is Multi-Walled Carbon Nano Tubes (MWCNT). They have thermal conductivity around 3000 W/mK while other materials used as nanoparticles like CuO have thermal conductivity of 76.5 W/mK. Due to this fact, MWCNT nanoparticles have potential to be used in nanofluids production, aiming to increase heat transfer rate in energy systems. In this context, the main goal of this paper is to evaluate from the synthesis to the experimental measurement of thermal conductivity of nanofluid samples based on functionalized (-OH) MWCNT nanoparticles. They will be analyzed nanoparticles with different functionalization degrees (4% wt, 6% wt, and 9% wt). In addition, it will be quantified other thermophysical properties (dynamic viscosity, specific heat and specific mass) of the synthetized nanofluids. So, the present work can contribute with experimental data that will help researches in the study and development of MWCNT nanofluids. According to the results, the maximum increment obtained in thermal conductivity was 10.65% in relation to the base fluid (water).
基金supported by the National Natural Science Foundation of China(21878200 and 21676174)International S&T Cooperation Program of Shanxi province(201703D421038)+1 种基金Shanxi Scholarship Council of China(2017-036)Joint Fund of Shanxi Provincial Coal Seam Gas(2015012019)。
文摘Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO_(2)emissions due to their large CO_(2)adsorption amount,excellent CO_(2)adsorption selectivity and lower energy requirements for adsorbent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO_(2)capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.
文摘The nanophotocatalysts were synthesized in four stages and evaluated by FTIR, FESEM and VSM analysis. The influence of nanofluids containing functionalized magnetic Ti O2 nanophotocatalyst and dipalmitoylphosphatidylcholine lecithin in drag reduction of turbulent flow in four horizontal pipelines was studied. The effective parameters on drag reduction(nanoparticle concentration, surfactant concentration, p H and Re number) were investigated and optimized in each pipeline using response surface method. The drag reduction in 1/2 " galvanized, 3/4" galvanized, 1/2 "five-layer and 1/2" cuprous pipelines was found 99.1%, 92.5%, 87.6% and 85.2%, respectively. The model adequacy was measured using ANOVA. Based on the high determination coefficient, more than 95% of variance of experimental data in all pipelines was described by quadratic model.
文摘Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic condition. Herein, a novel non-covalent surface modification approach towards graphene oxide was conducted via a UV-induced photo-polymerization technique that involves two major routes; a UV-sensitive initiator embedded via pi-pi interactions on the graphene planar rings, and the polymerization of hydrophobic polymeric chains along the surface. The functionalized graphene oxide successfully achieved the desired hydrophobicity as it displayed the characteristic of being readily dissolved in organic solvent. Upon its addition into a polymeric solution and subjected to an electrospinning process,non-woven random nanofibers embedded with graphene oxide sheets were obtained. The prepared polymeric nanofibers were subjected to two-step thermal treatments that eventually converted the polymeric chains into a carbon-rich conductive structure. A unique morphology was observed upon the addition of the functionalized graphene oxide, whereby the sheets were embedded and intercalated within the carbon nanofibers and formed a continuous structure. This reinforcement effectively enhanced the electrochemical performance of the carbon nanofibers by recording a specific capacitance of up to 140.10 F/g at the current density of 1 A/g, which was approximately three folds more than that of pristine nanofibers.It also retained the capacitance up to 96.2% after 1000 vigorous charge/discharge cycles. This functionalization technique opens up a new pathway in tuning the solubility nature of graphene oxide towards the synthesis of a graphene oxide-reinforced polymeric structure.
基金Funded by the National Natural Science Fundation of China(Nos.51678111 and 51478082)
文摘Functionalized graphene nano-platelets(FGN) were obtained via treating graphene nanoplatelets(GN) with HNO_3, and served as adsorbent for the removal of Pb^(2+) from solutions. We investigated the FGN adsorption capacity for Pb^(2+) at different initial concentrations, varying pH, contact time and temperature. The characterization results of scanning electron microscopy(SEM), thermal analysis(TG/DTG), Fourier transform infrared spectroscopy(FT-IR) and Brunauer-Emmett-Teller(BET) method indicated that FGN layers were thin and possess large specific area with oxygen-containing functional groups grafted onto their surface. Meanwhile, the determined equilibrium adsorption capacity of FGN for Pb^(2+) was 57.765 mg/g and adsorption isotherms well confirmed to Langmuir isotherms models. The results reveals that the FGN has better effect of water treatment.
基金supported by grants from the AO Foundation (AOOCD Consortium TA1711481)Areas of Excellence Scheme from the University Grant Council of Hong Kong (Ao E/M-402/20)+1 种基金Theme-based Research Scheme from the University Grant Council of Hong Kong (T13-402/17-N)Key-Area Research and Development Program of Guangdong Province (2019B010941001)
文摘Articular cartilage(AC)is an avascular and flexible connective tissue located on the bone surface in the diarthrodial joints.AC defects are common in the knees of young and physically active individuals.Because of the lack of suitable tissue-engineered artificial matrices,current therapies for AC defects,espe-cially full-thickness AC defects and osteochondral interfaces,fail to replace or regenerate damaged carti-lage adequately.With rapid research and development advancements in AC tissue engineering(ACTE),functionalized hydrogels have emerged as promising cartilage matrix substitutes because of their favor-able biomechanical properties,water content,swelling ability,cytocompatibility,biodegradability,and lubricating behaviors.They can be rationally designed and conveniently tuned to simulate the extracel-lular matrix of cartilage.This article briefly introduces the composition,structure,and function of AC and its defects,followed by a comprehensive review of the exquisite(bio)design and(bio)fabrication of func-tionalized hydrogels for AC repair.Finally,we summarize the challenges encountered in functionalized hydrogel-based strategies for ACTE both in vivo and in vitro and the future directions for clinical translation.
基金supporting by National Natural Science Foundation of China(Grant No.21878054)Project on the Integration of Industry and Education of Fujian Province(Project No.2018Y4008)。
文摘Biodiesel is an attractive alternative to fossil fuels due to the energy and environmental concerns. In this paper, seven different multi –SO_(3)H functionalized ILs based on the low-cost less-substituted amines, which contained massive sites for functionalization of sulfonic acid groups and further treatment of sulfonate-based anions, were prepared as catalysts with high acidity and desirable catalytic activity for the synthesis of biodiesel from the esterification of oleic acid with methanol. The physicochemical properties of these acidic ILs were characterized by a variety of analytical techniques such as FT-IR, EA, TGA, and the Br?nsted acidity was well determined by UV–vis. Among the ILs prepared, [EDA-PS][P-TSA] showed the highest catalytic activity for esterification due to its high acidity and appropriate miscibility with reactants, with an ultrahigh97.58% conversion of oleic acid under the optimum conditions(i.e. reaction time, 1.8 h;catalyst amount, 3 wt%;alcohol/acid molar ratio, 13:1,temperature 70℃) acquired from the Box–Behnken response surface methodology. With the novel strategy of multi –SO_(3) H modification on ILs,our catalyst had an approaching or even superior oleic acid conversion rate compared to other reported catalysts with considerably lower catalyst dosage and shorter reaction time. More importantly, it also exhibited high generality for converting various FFA feedstocks into biodiesel with considerable conversion within 93.59–94.33% under a rather lower catalyst dosage, which showed the valuable potential for converting low-cost oils into biodiesel from an economic and environmental perspective.
文摘A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16-dihydroxy-1- thia - 5, 8, 11, 14- tetraoxacycloheptadecane via etheritication with ω-chloroundecene, followed by hydrosilylation with triethoxysilane, cohydrolysis with D<sub>4</sub>, sequentially. Treating the polysiloxane with potassium cholroplatinite, the title complex was obtained. It was found that the platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.
基金This work was supported by the National Natural Science Foundation of China and the Natural Science Foundation of Hubei Province
文摘A modified method of preparing crown functionalized linear polysiloxane has been described.4’-allylbenzo-15-crown-5 was subjected to hydrosilylation with methyldichlorosilane,followed bypolycondensation with silanol-terminated polydimethylsiloxane to give the title crownfunctionalized linear polysiloxane. It was found that the polysiloxane could be coordinated withplatinum salt to form platinum complex, which could catalyze the hydrosilylation of olefins withtriethoxysilane efficiently.
文摘Nanocomposite cation exchange membranes(CEMs) were prepared by adding various loadings of functionalized silica nanoparticles to the sulfonated polyethersulfone(s PES) polymeric matrix. The silica nanoparticles were functionalized by mercaptopropyl(F_1, IEC=0), propylsulfonic acid(F_2, IEC= 2.71), and sulfonic acid(F_3, IEC=2.84). The properties of prepared membranes were investigated by varying the loadings of functionalized silica nanoparticles. Applying functionalized nanoparticles provides additional ion exchange groups and enhances water contents as well as conductivities and permselectivities of the membranes. The maximum IEC of 1.9 meq.g^(-1) was obtained for the membrane having 3 wt% F_3 nanoparticles and the maximum conductivity of 0.237 S·cm^(-1) was achieved for the membrane having 2 wt% F_3 nanoparticles, which were 19.6% and 64% higher than the corresponding values for s PES membrane, respectively. The excellent properties of the nanocomposite cation-exchange membranes make them appropriate candidates for electrodialysis and desalination processes.
基金supported by the National Natural Science Foundation of China (21825106, 92061201)the Program for Innovative Research Team (in Science and Technology) in Universities of Henan Province (19IRTSTHN022)Zhengzhou University。
文摘The society’s urgent demand for environmentally friendly, safe and low-cost energy storage devices has promoted the research of aqueous zinc-ion batteries. However, the uneven deposition of Zn ions on anodes will lead to the growth of the dendrite and reduce the Coulombic efficiency as well as the lifespan of the devices. Herein, we construct an O,N-dual functionalized carbon cloth current collector via a simple hydrothermal strategy, in which the oxygen-containing functional groups and the N heteroatoms can regulate the transmission and deposition of Zn ions, respectively. The proposed synergistic strategy ensures the uniform distribution of Zn ions on the surface of the Zn anode and inhibits the formation of dendrites. The symmetric cell based on the O,N-dual doped carbon cloth presents superior cycling stability(318 h) with a low voltage hysteresis(11.2 mV) at an areal capacity of 1 m Ah cm^(-2)(20% depth of diacharge). Meanwhile, the appreciably low overpotential(16 m V) and high Columbic efficiency(98.2%)also demonstrate that the O,N-dual functionalized carbon cloth can be worked as a promising host for Zn ions deposition.
基金financially supported by the Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2014BAC28B01)the Jiangsu Key Laboratory of Anaerobic Biotechnology (Jiangnan University) Supported Research Project (No. JKLAB201703)
文摘An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immobilized on the sol-gel derived silica, which is superior to purely viscous ionic liquid with a crucial limit of high temperature, low mass transfer rate,and mass loss. The adsorbents were characterized by the Fourier transform infrared spectrometer, transmission electron microscope, N_2 adsorption/desorption, X-ray photoelectron spectroscopy, and thermal analysis techniques. The effects of the metal and halogen in IL, the loading amount of IL, and the adsorption temperature were studied by dynamic adsorption experiments at a gas flow rate of 100 mL/min. The H2 S adsorption results have showed that the optimal adsorbent and adsorption temperature are 5% [Bmim]Cl·CuCl_2/silica gel and 20—50 ℃, respectively. H_2 S can be captured and oxidized to elemental sulfur, and [Bmim]Cl·CuCl_2/silica gel can be readily regenerated by air. The excellent efficiency of H2 S removal may be attributed to the formation of nano-scaled and high-concentration [Bmim]Cl·CuCl_2 confined in silica gel, indicating that the immobilization of [Bmim]Cl·CuCl_2 on the sol-gel derived silica can be used for H2 S removal promisingly.
