By synthesizing reactive powders via a self-sustaining combustion synthesis, the glycine-nitrate process, the gadolinium-doped celia （GDC） with the chemical formula Ce0.8Gd0.2O1.9 was prepared. The resultant powders...By synthesizing reactive powders via a self-sustaining combustion synthesis, the glycine-nitrate process, the gadolinium-doped celia （GDC） with the chemical formula Ce0.8Gd0.2O1.9 was prepared. The resultant powders were dispersed with the terpineol as the dispersant through different methods such as ball milling and high-shear dispersing. Coagulation factor （CF） was used to mark the degree of agglomeration on the nano-scale GDC in this work. The effect of agglomeration on the densification behavior at different sintering temperatures was investigated. The studies indicated that agglomeration retarded the densification at the sintering stage. The powders with better dispersion exhibited a higher sintered density at the same temperature. After effective dispersion treatment, GDC could be fully densified at the sintering temperature of 1300 ℃. The densification temperature was significantly lower than those reported previously. The high sintering kinetics of the ceramics was obtained based on the agglomeration control.展开更多
Gadolinium-doped ceria(GDC)interlayers are required to prevent the interfacial reaction between La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)cathode and Y_(2)O_(3)-stabilized ZrO 2(YSZ)electrolyte in solid oxide fuel ce...Gadolinium-doped ceria(GDC)interlayers are required to prevent the interfacial reaction between La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)cathode and Y_(2)O_(3)-stabilized ZrO 2(YSZ)electrolyte in solid oxide fuel cells(SOFCs).However,it's difficult to prepare a thin and dense GDC interlayer on the sintered half-cell at a low temperature.In this study,the physical vapor deposition(PVD)method was employed to success-fully manufacture dense GDC interlayers with the thickness of 1 m m.The influences of GDC sintering temperature(900℃,1000℃ and 1100℃)on cell performance characteristics and degradation behavior were investigated.The cell with GDC interlayer sintered at 1100?C showed the lowest degradation rate during the 216-h operation.The best stability was attributed to the most effective inhibition of Sr diffusion by the GDC interlayer,which was demonstrated by the almost unchanged Ohmic and polari-zation resistances during the aging stage and the negligible Sr enrichment at YSZ/GDC interface.Compared to the conventional screen-printed GDC interlayers(sintered above 1250℃),the GDC inter-layer prepared by the PVD method and sintered at 1100℃ was significantly denser and thinner,showing a promising application prospect due to its benefits for cell stability.展开更多
We report a study of the roles of gadolinium(lll)(Gd3+)dopants in influencing the catalytic activity of gadolinium-doped ceria nanoparticles towards the pro-oxidation of hydrogen peroxide to hydroxyl radicals.These do...We report a study of the roles of gadolinium(lll)(Gd3+)dopants in influencing the catalytic activity of gadolinium-doped ceria nanoparticles towards the pro-oxidation of hydrogen peroxide to hydroxyl radicals.These doped ceria nanoparticles with dopant concentrations of 0.6 wt.%,3 wt.%,and 6 wt.%Gd^3+were synthesized using an ozone-mediated method for tuning their catalytic activities.The Gd dopants were found to foster an increase in the percentage of Ce^3+ions in the doped ceria nanoparticles.Our reaction kinetic study revealed that the relationship between the overall reaction rates and the Gd dopant concentrations in our doped materials followed a volcano-like trend.In contrast,the apparent activation energy values of these Gd-doped ceria nanoparticles were found to be positively associated with the concentrations of Gd dopants.The overall catalytic activity trend was attributed to the interplay between the promotion and degradation effects of the Gd dopants on the properties of doped ceria nanoparticles.展开更多
In this study,Gd and Ca co-doped ceria electrolytes with the compositions of Ce_(0.8)Gd_(0.2-x)Ca_(x)O_(2-δ)(x=0-0.08) were prepared by a novel gel-casting method.The effects of the addition of Ca on the phase compos...In this study,Gd and Ca co-doped ceria electrolytes with the compositions of Ce_(0.8)Gd_(0.2-x)Ca_(x)O_(2-δ)(x=0-0.08) were prepared by a novel gel-casting method.The effects of the addition of Ca on the phase compositions,sintering behavio r,and electrical prope rties of samples were investigated.According to the scanning electron microscope results and relative density measurement results,it is found that the addition of particular quantity of CaO can promote the sintering densification with a uniform grain growth.When the sintering temperature is 1400℃,the sample with 6 mol% addition of Ca has the highest relative density,which reaches 98.5% of the theoretical density.The electrical properties testing results confirm that the electrical conductivity of the samples can be improved significantly by doping appropriate CaO content.The maximum conductivity of 0.082 S/cm can be obtained at 800℃ in the Ce_(0.8)Gd_(0.12)-Ca_(0.06)O_(1.87) sample.It suggests that CaO can be used as an effective sintering aid and a codopant on the optimization of electrical properties for ceria-based electrolytes.展开更多
Dehydrogenation is considered as one of the most important industrial applications for renewable energy.Cubic ceria-based catalysts are known to display promising dehydrogenation performances in this area.Large partic...Dehydrogenation is considered as one of the most important industrial applications for renewable energy.Cubic ceria-based catalysts are known to display promising dehydrogenation performances in this area.Large particle size(>20 nm)and less surface defects,however,hinder further application of ceria materials.Herein,an alternative strategy involving lactic acid(LA)assisted hydrothermal method was developed to synthesize active,selective and durable cubic ceria of<6 nm for dehydrogenation reactions.Detailed studies of growth mechanism revealed that,the carboxyl and hydroxyl groups in LA molecule synergistically manipulate the morphological evolution of ceria precursors.Carboxyl groups determine the cubic shape and particle size,while hydroxyl groups promote compositional transformation of ceria precursors into CeO_(2) phases.Moreover,enhanced oxygen vacancies(Vo)on the surface of CeO_(2) were obtained owing to continuous removal of O species under reductive atmosphere.Cubic CeO_(2) catalysts synthesized by the LA-assisted method,immobilized with bimetallic PtCo clusters,exhibit a record high activity(TOF:29,241 h^(-1))and Vo-dependent synergism for dehydrogenation of bio-derived polyols at 200℃.We also found that quenching Vo defects at air atmosphere causes activity loss of PtCo/CeO_(2) catalysts.To regenerate Vo defects,a simple strategy was developed by irradiating deactivated catalysts using hernia lamp.The outcome of this work will provide new insights into manufacturing durable catalyst materials for aqueous phase dehydrogenation applications.展开更多
Cerium oxide(CeO_(2)),or ceria,and its doped derivatives have been extensively studied for several decades and are well-known oxides valued for their unique structural properties and wide range of applications.These m...Cerium oxide(CeO_(2)),or ceria,and its doped derivatives have been extensively studied for several decades and are well-known oxides valued for their unique structural properties and wide range of applications.These materials play a crucial role in sustainable development within society.Structural modification through de fect e ngineering of the highly stable cubic fluorite phase enhances the versatility of this doped ceria to a new level.Among the numerous dopants of the CeO_(2)matrix,ceria doped with gadolinium(Gd),known as Ce_(1-x)Gd_(x)O_(2-■)(CGO),is gaining popularity due to its multifunctionality.The introduction of defect-induced vacancies in the oxygen sublattice(V_(o))and a change in the average valence of cerium(Ce^(3+)/Ce^(4+))are primarily responsible for the improved performance compared to pristine CeO_(2).These materials are currently undergoing intensive research for potential use as electrolytes in intermediate-temperature solid oxide fuel cells(IT-SOFCs)and dense oxygen-permeable membranes(OPMs).Additionally,they are being commercially utilized for power generation and oxygen separation.CGO materials are also attracting significant attention in various fields such as optics,photocatalysis,electrostriction,spintronics,gas sensing,electrocatalysis,and biomedical applications.This review paper aims to compile the latest contributions to CGO materials and comprehensively cover their various application areas.The crystal structure,defect equilibrium in Gd^(3+)-doped CeO_(2),the origin of multifunctionality,and the prospects of these materials are also exclusively discussed.展开更多
A series of H3PO4-modified CeO2 samples were prepared by impregnation of CeO2 with H3PO4solution,and evaluated for the selective catalytic reduction of NOx by NH3.The samples were characterized by X-ray diffraction,N2...A series of H3PO4-modified CeO2 samples were prepared by impregnation of CeO2 with H3PO4solution,and evaluated for the selective catalytic reduction of NOx by NH3.The samples were characterized by X-ray diffraction,N2 adsorption-desorption,infrared spectroscopy,Raman spectroscopy,X-ray photoelectron spectroscopy,temperature-programmed desorption of NH3,and temperature-programmed reduction of H2.The results showed that more than 80%NO conversion was achieved in the temperature range 250-550℃ over the H3PO4-CeO2 catalyst.The enhanced catalytic performance could be ascribed to the increase in acidic strength,especially Bronsted acidity,and reduction in redox properties of the CeO2 after H3PO4 modification.展开更多
The preferential oxidation of CO （CO‐PROX） is a hot topic because of its importance in pro‐ton‐exchange membrane fuel cells （PEMFCs）. Au catalysts are highly active in CO oxidation. Howev‐er, their activities ...The preferential oxidation of CO （CO‐PROX） is a hot topic because of its importance in pro‐ton‐exchange membrane fuel cells （PEMFCs）. Au catalysts are highly active in CO oxidation. Howev‐er, their activities still need to be improved at the PEMFC operating temperatures of 80–120 ＆#176;C. In the present study, Au nanoparticles of average size 2.6 nm supported on ceria‐modified Al2O3 were synthesized and characterized using powder X‐ray diffraction, nitrogen physisorption, transmission electron and scanning transmission electron microscopies, temperature‐programmed hydrogen reduction （H2‐TPR）, Raman spectroscopy, and in situ diffuse‐reflectance infrared Fourier‐transform spectroscopy. Highly dispersed Au nanoparticles and strong structures formed by Au–support in‐teractions were the main active species on the ceria surface. The Raman and H2‐TPR results show that the improved catalytic performance of the Au catalysts can be attributed to enhanced strong metal–support interactions and the reducibility caused by ceria doping. The formation of oxygen vacancies on the catalysts increased their activities in CO‐PROX. The synthesized Au catalysts gave excellent catalytic performances with high CO conversions （＆gt;97%） and CO2 selectivities （＆gt;50%） in the temperature range 80–150 ＆#176;C.展开更多
Ceria nanotubes with high CO conversion activity by means of carbon nanotubes as removable templates in the simple liquid phase process were fabricated under moderate conditions. The pristine CNTs were first pretreate...Ceria nanotubes with high CO conversion activity by means of carbon nanotubes as removable templates in the simple liquid phase process were fabricated under moderate conditions. The pristine CNTs were first pretreated by refluxing in a 30% nitric acid solution at 140 ℃ for 24 h, then dispersed in an ethanolic Ce（NO3）3.6H2O solution with ultrasonic radiation at room temperature for 1 h. Under vigorous stirring, NaOH solution was added drop by drop into the above ethanolic solution until the pH value was 10. The product was collected and repeatedly washed with ethanol and on drying at 60 ℃, the CeO2/CNT composites were obtained. Then, the as-prepared composites were heated at 450 ℃ in an air atmosphere for 30 min to remove CNTs. The ceria nanotubes were characterized by X-Ray Diffraction （XRD）, Transmission Electron Microscopy （TEM）, and X-Ray Photoelectron Spectrum （XPS）. The results showed that the ceria nanotubes were polycrystalline face-centered cubic phase and were composed of lots of dense cefia nanoparficles. The diameter of cefia nanotubes was about 40-50 nm. Catalytic activity of the product for CO oxidation was carded out at the region of 30-300 ℃ in a U-shaped quartz reactor with feeding about 0.15 g of the catalyst, which was loaded on Al2O3 carder. The inlet gas composition was 1.0% CO and 28% O2 with N2 as balance, and the rate of flow was kept at 40 ml/min. The catalytic products were analyzed by gas chromatography. The as-repared CeO2 nanotubes showed higher CO oxidation activity, which indicated that the morphology of ceria products affected the catalytic performance. The ceria nanotubes supported on Al2O3 demonstrated that conversion temperature for CO oxidation to CO2 was lower than that for bulk catalysts.展开更多
Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were in...Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were infiltrated into(Pr0.7Ca0.3)0.9MnO3-δ(PCM) cathode of anode supported SOFC cells.The cell with 2.6 mg/cm2 SDC impregnated in cathode showed the maximum power density of 580 mW/cm2 compared with 310 mW/cm2 of the cell without impregnation at 850 °C.The cells were also characterized with the impeda...展开更多
Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by sc...Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy（SEM）, X-ray diffractometer（XRD）, high-resolution transmission electron microscopy（HRTEM） and temperature programmed reducfion（TPR） techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift （WGS） reaction in a wide temperature range （180-360 ℃）. The results showed that 3DOM Pt/TiO2 catalyst exhibited obviously better catalytic performance than the corresponding non macro-porous catalyst, owing to the macro-porous structure favoring mass transfer. Addition of celia into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the celia modified catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.展开更多
Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined betwee...Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.展开更多
Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900℃ in air. Scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and ...Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900℃ in air. Scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and high-resolution electron microscopy （HREM） were used to examine the morphology and microstructure of the oxide film. It was found that ceria coating greatly improved the oxidation resistance of Cr both in isothermal and cyclic oxidizing experiments. Acoustic emission （AE） technique was used in situ to monitor the cracking and spalling of oxide film, and AE signals were analyzed in time-domain and number-domain according to related oxide fracture model. Laser Raman spectrometer was also used to study the stress of oxide film formed on Cr with and without ceria. The improvement in oxidation resistance of chromium is believed mainly due to that ceria greatly reduced the growth speed and grain size of Cr2O3. This fine grained Cr2O3 oxide film might have better high temperature plasticity and could relieve parts of the compressive stress by means of creeping and maintained ridge character and relatively lower level of internal stress. Meanwhile, ceria application reduced the size and number of interfacial defects, remarkably enhanced the adhesive property of Cr2O3 oxide scale formed on Cr substrate.展开更多
基金Project supported by the Key Research Programof the National Natural Science Foundation (90610035)
文摘By synthesizing reactive powders via a self-sustaining combustion synthesis, the glycine-nitrate process, the gadolinium-doped celia （GDC） with the chemical formula Ce0.8Gd0.2O1.9 was prepared. The resultant powders were dispersed with the terpineol as the dispersant through different methods such as ball milling and high-shear dispersing. Coagulation factor （CF） was used to mark the degree of agglomeration on the nano-scale GDC in this work. The effect of agglomeration on the densification behavior at different sintering temperatures was investigated. The studies indicated that agglomeration retarded the densification at the sintering stage. The powders with better dispersion exhibited a higher sintered density at the same temperature. After effective dispersion treatment, GDC could be fully densified at the sintering temperature of 1300 ℃. The densification temperature was significantly lower than those reported previously. The high sintering kinetics of the ceramics was obtained based on the agglomeration control.
基金This work was supported by the National Key R&D Program of China(2018YFB1502202)Tsinghua University Initiative Scien-tific Research Program(20193080038).
文摘Gadolinium-doped ceria(GDC)interlayers are required to prevent the interfacial reaction between La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)cathode and Y_(2)O_(3)-stabilized ZrO 2(YSZ)electrolyte in solid oxide fuel cells(SOFCs).However,it's difficult to prepare a thin and dense GDC interlayer on the sintered half-cell at a low temperature.In this study,the physical vapor deposition(PVD)method was employed to success-fully manufacture dense GDC interlayers with the thickness of 1 m m.The influences of GDC sintering temperature(900℃,1000℃ and 1100℃)on cell performance characteristics and degradation behavior were investigated.The cell with GDC interlayer sintered at 1100?C showed the lowest degradation rate during the 216-h operation.The best stability was attributed to the most effective inhibition of Sr diffusion by the GDC interlayer,which was demonstrated by the almost unchanged Ohmic and polari-zation resistances during the aging stage and the negligible Sr enrichment at YSZ/GDC interface.Compared to the conventional screen-printed GDC interlayers(sintered above 1250℃),the GDC inter-layer prepared by the PVD method and sintered at 1100℃ was significantly denser and thinner,showing a promising application prospect due to its benefits for cell stability.
基金C.L.C.,A.B.,and T.J.F.gratefully acknowledge the financial support from the National Science Foundation(No.CHE-1362916)Y.G.and D.W.Z.were supported by the CASShanghai Science Research Center(No.CAS-SSRC-YJ-2015-01)the National Natural Science Foundation of China(Nos.11574340 and 21773287).
文摘We report a study of the roles of gadolinium(lll)(Gd3+)dopants in influencing the catalytic activity of gadolinium-doped ceria nanoparticles towards the pro-oxidation of hydrogen peroxide to hydroxyl radicals.These doped ceria nanoparticles with dopant concentrations of 0.6 wt.%,3 wt.%,and 6 wt.%Gd^3+were synthesized using an ozone-mediated method for tuning their catalytic activities.The Gd dopants were found to foster an increase in the percentage of Ce^3+ions in the doped ceria nanoparticles.Our reaction kinetic study revealed that the relationship between the overall reaction rates and the Gd dopant concentrations in our doped materials followed a volcano-like trend.In contrast,the apparent activation energy values of these Gd-doped ceria nanoparticles were found to be positively associated with the concentrations of Gd dopants.The overall catalytic activity trend was attributed to the interplay between the promotion and degradation effects of the Gd dopants on the properties of doped ceria nanoparticles.
基金Project supported by the Natural Science Foundation of Anhui Province of China(1708085ME112)。
文摘In this study,Gd and Ca co-doped ceria electrolytes with the compositions of Ce_(0.8)Gd_(0.2-x)Ca_(x)O_(2-δ)(x=0-0.08) were prepared by a novel gel-casting method.The effects of the addition of Ca on the phase compositions,sintering behavio r,and electrical prope rties of samples were investigated.According to the scanning electron microscope results and relative density measurement results,it is found that the addition of particular quantity of CaO can promote the sintering densification with a uniform grain growth.When the sintering temperature is 1400℃,the sample with 6 mol% addition of Ca has the highest relative density,which reaches 98.5% of the theoretical density.The electrical properties testing results confirm that the electrical conductivity of the samples can be improved significantly by doping appropriate CaO content.The maximum conductivity of 0.082 S/cm can be obtained at 800℃ in the Ce_(0.8)Gd_(0.12)-Ca_(0.06)O_(1.87) sample.It suggests that CaO can be used as an effective sintering aid and a codopant on the optimization of electrical properties for ceria-based electrolytes.
基金financial supports National Natural Science Foundation of China(22078365,21706290)Natural Science Foundation of Shandong Province(ZR2017MB004)+2 种基金Innovative Research Funding from Qingdao City,Shandong Province(17-1-1-80-jch)“Fundamental Research Funds for the Central Universities”and“the Development Fund of State Key Laboratory of Heavy Oil Processing”(17CX02017A,20CX02204A)Postgraduate Innovation Project(YCX2021057)from China University of Petroleum.
文摘Dehydrogenation is considered as one of the most important industrial applications for renewable energy.Cubic ceria-based catalysts are known to display promising dehydrogenation performances in this area.Large particle size(>20 nm)and less surface defects,however,hinder further application of ceria materials.Herein,an alternative strategy involving lactic acid(LA)assisted hydrothermal method was developed to synthesize active,selective and durable cubic ceria of<6 nm for dehydrogenation reactions.Detailed studies of growth mechanism revealed that,the carboxyl and hydroxyl groups in LA molecule synergistically manipulate the morphological evolution of ceria precursors.Carboxyl groups determine the cubic shape and particle size,while hydroxyl groups promote compositional transformation of ceria precursors into CeO_(2) phases.Moreover,enhanced oxygen vacancies(Vo)on the surface of CeO_(2) were obtained owing to continuous removal of O species under reductive atmosphere.Cubic CeO_(2) catalysts synthesized by the LA-assisted method,immobilized with bimetallic PtCo clusters,exhibit a record high activity(TOF:29,241 h^(-1))and Vo-dependent synergism for dehydrogenation of bio-derived polyols at 200℃.We also found that quenching Vo defects at air atmosphere causes activity loss of PtCo/CeO_(2) catalysts.To regenerate Vo defects,a simple strategy was developed by irradiating deactivated catalysts using hernia lamp.The outcome of this work will provide new insights into manufacturing durable catalyst materials for aqueous phase dehydrogenation applications.
基金Project supported by the Indian Council of Medical Research(#5/3/8/30/ITR-f/2018-ITR)National Research Foundation of Korea(RS-2023-00278268)。
文摘Cerium oxide(CeO_(2)),or ceria,and its doped derivatives have been extensively studied for several decades and are well-known oxides valued for their unique structural properties and wide range of applications.These materials play a crucial role in sustainable development within society.Structural modification through de fect e ngineering of the highly stable cubic fluorite phase enhances the versatility of this doped ceria to a new level.Among the numerous dopants of the CeO_(2)matrix,ceria doped with gadolinium(Gd),known as Ce_(1-x)Gd_(x)O_(2-■)(CGO),is gaining popularity due to its multifunctionality.The introduction of defect-induced vacancies in the oxygen sublattice(V_(o))and a change in the average valence of cerium(Ce^(3+)/Ce^(4+))are primarily responsible for the improved performance compared to pristine CeO_(2).These materials are currently undergoing intensive research for potential use as electrolytes in intermediate-temperature solid oxide fuel cells(IT-SOFCs)and dense oxygen-permeable membranes(OPMs).Additionally,they are being commercially utilized for power generation and oxygen separation.CGO materials are also attracting significant attention in various fields such as optics,photocatalysis,electrostriction,spintronics,gas sensing,electrocatalysis,and biomedical applications.This review paper aims to compile the latest contributions to CGO materials and comprehensively cover their various application areas.The crystal structure,defect equilibrium in Gd^(3+)-doped CeO_(2),the origin of multifunctionality,and the prospects of these materials are also exclusively discussed.
基金supported by the National Natural Science Foundation of China(21177120)the Open Fund of Key Laboratory of Functional Inorganic Material Chemistry(Heilongjiang University),Ministry of Education~~
文摘A series of H3PO4-modified CeO2 samples were prepared by impregnation of CeO2 with H3PO4solution,and evaluated for the selective catalytic reduction of NOx by NH3.The samples were characterized by X-ray diffraction,N2 adsorption-desorption,infrared spectroscopy,Raman spectroscopy,X-ray photoelectron spectroscopy,temperature-programmed desorption of NH3,and temperature-programmed reduction of H2.The results showed that more than 80%NO conversion was achieved in the temperature range 250-550℃ over the H3PO4-CeO2 catalyst.The enhanced catalytic performance could be ascribed to the increase in acidic strength,especially Bronsted acidity,and reduction in redox properties of the CeO2 after H3PO4 modification.
基金supported by the National Basic Research Program of China (973 Program, 2013CB934104)the National Natural Science Founda-tion of China (21225312, U1303192)~~
文摘The preferential oxidation of CO （CO‐PROX） is a hot topic because of its importance in pro‐ton‐exchange membrane fuel cells （PEMFCs）. Au catalysts are highly active in CO oxidation. Howev‐er, their activities still need to be improved at the PEMFC operating temperatures of 80–120 ＆#176;C. In the present study, Au nanoparticles of average size 2.6 nm supported on ceria‐modified Al2O3 were synthesized and characterized using powder X‐ray diffraction, nitrogen physisorption, transmission electron and scanning transmission electron microscopies, temperature‐programmed hydrogen reduction （H2‐TPR）, Raman spectroscopy, and in situ diffuse‐reflectance infrared Fourier‐transform spectroscopy. Highly dispersed Au nanoparticles and strong structures formed by Au–support in‐teractions were the main active species on the ceria surface. The Raman and H2‐TPR results show that the improved catalytic performance of the Au catalysts can be attributed to enhanced strong metal–support interactions and the reducibility caused by ceria doping. The formation of oxygen vacancies on the catalysts increased their activities in CO‐PROX. The synthesized Au catalysts gave excellent catalytic performances with high CO conversions （＆gt;97%） and CO2 selectivities （＆gt;50%） in the temperature range 80–150 ＆#176;C.
基金Fundamental Research Key Project of Shanghai (06JC14060)
文摘Ceria nanotubes with high CO conversion activity by means of carbon nanotubes as removable templates in the simple liquid phase process were fabricated under moderate conditions. The pristine CNTs were first pretreated by refluxing in a 30% nitric acid solution at 140 ℃ for 24 h, then dispersed in an ethanolic Ce（NO3）3.6H2O solution with ultrasonic radiation at room temperature for 1 h. Under vigorous stirring, NaOH solution was added drop by drop into the above ethanolic solution until the pH value was 10. The product was collected and repeatedly washed with ethanol and on drying at 60 ℃, the CeO2/CNT composites were obtained. Then, the as-prepared composites were heated at 450 ℃ in an air atmosphere for 30 min to remove CNTs. The ceria nanotubes were characterized by X-Ray Diffraction （XRD）, Transmission Electron Microscopy （TEM）, and X-Ray Photoelectron Spectrum （XPS）. The results showed that the ceria nanotubes were polycrystalline face-centered cubic phase and were composed of lots of dense cefia nanoparficles. The diameter of cefia nanotubes was about 40-50 nm. Catalytic activity of the product for CO oxidation was carded out at the region of 30-300 ℃ in a U-shaped quartz reactor with feeding about 0.15 g of the catalyst, which was loaded on Al2O3 carder. The inlet gas composition was 1.0% CO and 28% O2 with N2 as balance, and the rate of flow was kept at 40 ml/min. The catalytic products were analyzed by gas chromatography. The as-repared CeO2 nanotubes showed higher CO oxidation activity, which indicated that the morphology of ceria products affected the catalytic performance. The ceria nanotubes supported on Al2O3 demonstrated that conversion temperature for CO oxidation to CO2 was lower than that for bulk catalysts.
文摘Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were infiltrated into(Pr0.7Ca0.3)0.9MnO3-δ(PCM) cathode of anode supported SOFC cells.The cell with 2.6 mg/cm2 SDC impregnated in cathode showed the maximum power density of 580 mW/cm2 compared with 310 mW/cm2 of the cell without impregnation at 850 °C.The cells were also characterized with the impeda...
基金supported by the Ministry of Sciences and Technology of China (863 Programs) (2006AA05Z115, 2007AA05Z104)
文摘Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy（SEM）, X-ray diffractometer（XRD）, high-resolution transmission electron microscopy（HRTEM） and temperature programmed reducfion（TPR） techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift （WGS） reaction in a wide temperature range （180-360 ℃）. The results showed that 3DOM Pt/TiO2 catalyst exhibited obviously better catalytic performance than the corresponding non macro-porous catalyst, owing to the macro-porous structure favoring mass transfer. Addition of celia into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the celia modified catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.
基金Project supported by Rare Earth Department of National Development Committee Preparation of High Quality Polishing Powder
文摘Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.
基金Project supported by the National Natural Science Foundation of China (29231011)the Natural Science Foundation ofJiangsu Province (04KJD460010)
文摘Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900℃ in air. Scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and high-resolution electron microscopy （HREM） were used to examine the morphology and microstructure of the oxide film. It was found that ceria coating greatly improved the oxidation resistance of Cr both in isothermal and cyclic oxidizing experiments. Acoustic emission （AE） technique was used in situ to monitor the cracking and spalling of oxide film, and AE signals were analyzed in time-domain and number-domain according to related oxide fracture model. Laser Raman spectrometer was also used to study the stress of oxide film formed on Cr with and without ceria. The improvement in oxidation resistance of chromium is believed mainly due to that ceria greatly reduced the growth speed and grain size of Cr2O3. This fine grained Cr2O3 oxide film might have better high temperature plasticity and could relieve parts of the compressive stress by means of creeping and maintained ridge character and relatively lower level of internal stress. Meanwhile, ceria application reduced the size and number of interfacial defects, remarkably enhanced the adhesive property of Cr2O3 oxide scale formed on Cr substrate.
