Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of ...Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of the pump.Research on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,etc.However,there are few cavitation studies on external herringbone gear pumps.In addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow field.Therefore,it is urgent to study the cavitation characteristics of external herringbone gear pumps.Compared with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is easier.The simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing area.Cavitation can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be achieved.For example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.展开更多
The wear rate between the rotors of a hypotrochoidal gear pump is characterized.Using the knowledge of shape design on the rotors,the contact stresses without hydrodynamic effect between the rotor teeth were evaluated...The wear rate between the rotors of a hypotrochoidal gear pump is characterized.Using the knowledge of shape design on the rotors,the contact stresses without hydrodynamic effect between the rotor teeth were evaluated through the calculation of the Hertzian contact stress.Based on the above results and the sliding velocity between the rotors,a genetic algorithm (GA) was used as an optimization technique forminimizing the wear rate proportional factor (WRPF).The result shows that the wear rate or the WRPF can be reduced considerably,e.g.approximately 12.8%,throughout the optimization using GA.展开更多
In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axia...In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axial force was obtained and the relationship between the axial force and structure parameters of gears was clarified.In order to balance the axial force,the pressure oil in the high pressure area was introduced into the end face of the plunger to press the plunger against the gear shaft,and the hydrostatic bearing whose type is plunger at the end of the shaft was designed.In order to verify the balance effect of axial force,the leakage owing to end clearance and volume efficiency of gear hydraulic pump before and after the balancing process was analyzed.This paper provides a new analysis idea and balance scheme for the axial force produced in the working process of the double arc helical gear hydraulic pump,which can reduce the leakage owing to end clearance caused by the axial force and improve the volume efficiency of the gear hydraulic pump.展开更多
Based on a comprehensive analysis of the structure and existing problems ofthe gear pump, provided a structure principle of a synchronous gear pump.The discussionsfocused on the working principle, construction feature...Based on a comprehensive analysis of the structure and existing problems ofthe gear pump, provided a structure principle of a synchronous gear pump.The discussionsfocused on the working principle, construction features and finite element analysis ofthe hydraulic gear.The research indicates that the new pump has such advantages aslower noise, better distributed flow and a high work pressure, and it can be widely used inhydraulic systems.展开更多
Nowadays, many kinds of software, which have succes sf ully created the integration of CAD, CAPP and CAM, find their disadvantages in p ractical manufacturing. As a result, it is welcomed to develop small CAD/CAPP sy ...Nowadays, many kinds of software, which have succes sf ully created the integration of CAD, CAPP and CAM, find their disadvantages in p ractical manufacturing. As a result, it is welcomed to develop small CAD/CAPP sy stems on a proper CAD platform, which aim at requirements of factories. Based on the one of the most popular three-dimensional design software SolidWorks, we successfully developed a set of gear pump CAD /CAPP software for Huaiyin Gene ral Factory of Mechanics. 1 The architecture and function of the software According to the need of the enterprises, the general structure of the software contain two subsystems, which are detailed as follows: · The gear pump CAD subsystem contains four main modules, including the optiona l design module of gear pump, module of part design, the module of entity modeli ng and the module of drawing which creates 2 D drawings of parts and assembly c orresponding 3 D modals. · The gear pump CAPP subsystem, which is a combination of creative mode and der ivate mode, also includes four modules, they are the module of access to feature s, the module of planning process route, the module of designing process sheets and the module of generating process documents. 2 The developing environment of the system Basing on Windows 98 and SolidWorks2001 platform, this system creates all functi ons by using Visual C++ 6.0 as developing tools. 3 The keys to the CAD/CAPP integration 3.1 The establishment of product information modal The information of parts is the basis of process planning. In this system, we us e feature modeling to describe the information of parts and assembly of gear pum p, and set up a fundamental basis for the whole system. The information module o f gear pump includes the information of both the assembly and the parts; the par t-describing module uses four-layer structure that is subassembly layer, part layer, feature layer and geometric layer. 3.2 The operation of the information on feature modeling After establishment of information mode of gear pump, the next key problem is ho w to transmit information of product to CAPP subsystem. In order to integrate pe rfectly, connecting CAD with CAPP directly can be a good method. In this system, all information of parts is store in the part drawing files, and the CAPP syste m can load these files to get information. The gear pumps, which are produced by Huaiyin General Factory of Mechanics, are usually belong to several similar typ es, and this means that most products possess large number of similar feature. T herefore, we can easily establish a specific feature for gear pump CAD/CAPP syst em. All parts are created by selecting these features and/or adding few special features. In the module of access to feature of CAPP subsystem, the main task is to find the features and the information will be easily got. 4 Conclusion This system successfully creates gear pump CAD/CAPP integration based on SolidWo rks. 3D CAD software provide more convenient platform for integration and will i nevitably become the mainstream of product design. By developing this system, we clearly realize the promising future of SolidWorks.展开更多
This paper introduces the performances of compound gear pump. Based on the target of having the smallest mass per unit volume, the paper established a mathematical model of optimization, and obtained the results of op...This paper introduces the performances of compound gear pump. Based on the target of having the smallest mass per unit volume, the paper established a mathematical model of optimization, and obtained the results of optimization of the pump.展开更多
The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium allo...The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium alloy. A coMPact ceramic layer of more than 130 μm was developed on the movable endplate with the hardness up to HV1000 by means of microarc oxidation. A trial of tests conducted in a water power transmission system show that the maximum outlet pressure of the gear pump with the movable endplate treated by microarc oxidation, can reach 16 MPa. It is pointed out that the ceramic coating developed by microarc oxidation technology on the surface of aluminium alloy, is economical and feasible.展开更多
Part and Draft modules of SolidEdge are used to construct 3D solid models and generate part drawings, while ActiveX Automation of VB is used to access engineering database files to realize dimension-driven modificat...Part and Draft modules of SolidEdge are used to construct 3D solid models and generate part drawings, while ActiveX Automation of VB is used to access engineering database files to realize dimension-driven modification of the designed parts. Moreover, VB plays the enabling role of integrating all work processes of gear pump design, resulting in a comprehensive CAD system.展开更多
基金supported by a Grant(2024-MOIS35-005)of Policy-linked Technology Development Program on Natural Disaster Prevention and Mitigation funded by Ministry of Interior and Safety(MOIS,Korea).
文摘Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of the pump.Research on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,etc.However,there are few cavitation studies on external herringbone gear pumps.In addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow field.Therefore,it is urgent to study the cavitation characteristics of external herringbone gear pumps.Compared with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is easier.The simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing area.Cavitation can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be achieved.For example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.
基金supported by Changwon National University in 2010,Korea
文摘The wear rate between the rotors of a hypotrochoidal gear pump is characterized.Using the knowledge of shape design on the rotors,the contact stresses without hydrodynamic effect between the rotor teeth were evaluated through the calculation of the Hertzian contact stress.Based on the above results and the sliding velocity between the rotors,a genetic algorithm (GA) was used as an optimization technique forminimizing the wear rate proportional factor (WRPF).The result shows that the wear rate or the WRPF can be reduced considerably,e.g.approximately 12.8%,throughout the optimization using GA.
文摘In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axial force was obtained and the relationship between the axial force and structure parameters of gears was clarified.In order to balance the axial force,the pressure oil in the high pressure area was introduced into the end face of the plunger to press the plunger against the gear shaft,and the hydrostatic bearing whose type is plunger at the end of the shaft was designed.In order to verify the balance effect of axial force,the leakage owing to end clearance and volume efficiency of gear hydraulic pump before and after the balancing process was analyzed.This paper provides a new analysis idea and balance scheme for the axial force produced in the working process of the double arc helical gear hydraulic pump,which can reduce the leakage owing to end clearance caused by the axial force and improve the volume efficiency of the gear hydraulic pump.
文摘Based on a comprehensive analysis of the structure and existing problems ofthe gear pump, provided a structure principle of a synchronous gear pump.The discussionsfocused on the working principle, construction features and finite element analysis ofthe hydraulic gear.The research indicates that the new pump has such advantages aslower noise, better distributed flow and a high work pressure, and it can be widely used inhydraulic systems.
文摘Nowadays, many kinds of software, which have succes sf ully created the integration of CAD, CAPP and CAM, find their disadvantages in p ractical manufacturing. As a result, it is welcomed to develop small CAD/CAPP sy stems on a proper CAD platform, which aim at requirements of factories. Based on the one of the most popular three-dimensional design software SolidWorks, we successfully developed a set of gear pump CAD /CAPP software for Huaiyin Gene ral Factory of Mechanics. 1 The architecture and function of the software According to the need of the enterprises, the general structure of the software contain two subsystems, which are detailed as follows: · The gear pump CAD subsystem contains four main modules, including the optiona l design module of gear pump, module of part design, the module of entity modeli ng and the module of drawing which creates 2 D drawings of parts and assembly c orresponding 3 D modals. · The gear pump CAPP subsystem, which is a combination of creative mode and der ivate mode, also includes four modules, they are the module of access to feature s, the module of planning process route, the module of designing process sheets and the module of generating process documents. 2 The developing environment of the system Basing on Windows 98 and SolidWorks2001 platform, this system creates all functi ons by using Visual C++ 6.0 as developing tools. 3 The keys to the CAD/CAPP integration 3.1 The establishment of product information modal The information of parts is the basis of process planning. In this system, we us e feature modeling to describe the information of parts and assembly of gear pum p, and set up a fundamental basis for the whole system. The information module o f gear pump includes the information of both the assembly and the parts; the par t-describing module uses four-layer structure that is subassembly layer, part layer, feature layer and geometric layer. 3.2 The operation of the information on feature modeling After establishment of information mode of gear pump, the next key problem is ho w to transmit information of product to CAPP subsystem. In order to integrate pe rfectly, connecting CAD with CAPP directly can be a good method. In this system, all information of parts is store in the part drawing files, and the CAPP syste m can load these files to get information. The gear pumps, which are produced by Huaiyin General Factory of Mechanics, are usually belong to several similar typ es, and this means that most products possess large number of similar feature. T herefore, we can easily establish a specific feature for gear pump CAD/CAPP syst em. All parts are created by selecting these features and/or adding few special features. In the module of access to feature of CAPP subsystem, the main task is to find the features and the information will be easily got. 4 Conclusion This system successfully creates gear pump CAD/CAPP integration based on SolidWo rks. 3D CAD software provide more convenient platform for integration and will i nevitably become the mainstream of product design. By developing this system, we clearly realize the promising future of SolidWorks.
文摘This paper introduces the performances of compound gear pump. Based on the target of having the smallest mass per unit volume, the paper established a mathematical model of optimization, and obtained the results of optimization of the pump.
基金Sponsored by the National Natural Science Foundation of China(Grant No.60772077)
文摘The ceramic coating technology of microarc oxidation (MAO) was utilized to modify surface properties of the movable endplate of a high pressure gear pump used in water-hydraulic system, which is made of aluminium alloy. A coMPact ceramic layer of more than 130 μm was developed on the movable endplate with the hardness up to HV1000 by means of microarc oxidation. A trial of tests conducted in a water power transmission system show that the maximum outlet pressure of the gear pump with the movable endplate treated by microarc oxidation, can reach 16 MPa. It is pointed out that the ceramic coating developed by microarc oxidation technology on the surface of aluminium alloy, is economical and feasible.
基金Supported by ‘The tenth five plan’ of national education science(DJB030357) ‘The tenth five plan’ of jiangsu education science(D/2003/01062) Philosophy and social science fund project6 of Jiangsu education department(D3SJB880008)
文摘Part and Draft modules of SolidEdge are used to construct 3D solid models and generate part drawings, while ActiveX Automation of VB is used to access engineering database files to realize dimension-driven modification of the designed parts. Moreover, VB plays the enabling role of integrating all work processes of gear pump design, resulting in a comprehensive CAD system.