At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 ea...At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 earthquake,which has very strong seismic activity.Therefore,carrying out engineering construction in the Sichuan-Tibet transport corridor is a huge challenge for geological technological personnel.To determining the spatial geometric distribution,activity of active faults and geological safety risk in the Sichuan-Tibet transport corridor.Based on remote sensing images,ground surveys,and chronological tests,as well as the deep geophysical and current GPS data,we investigated the geometry,segmentation,and paleoearthquake history of five major active fault zones in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,namely the Xianshuihe,Litang,Batang,Jiali-Chayu and Lulang-Yigong.The five major fault zones are all Holocene active faults,which contain strike-slip components as well as thrust or normal fault components,and contain multiple branch faults.The Selaha-Kangding segment of the Xianshuihe fault zone,the Maoyaba and Litang segment of the Litang fault zone,the middle segment(Yigong-Tongmai-Bomi)of Jiali-Chayu fault zone and Lulang-Yigong fault zone have the risk of experiencing strong earthquakes in the future,with a high possibility of the occurrence of MS≥7.0 earthquakes.The Jinsha River and the Palong-Zangbu River,which is a high-risk area for geological hazard chain risk in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor.Construction and safe operation Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,need strengthen analysis the current crustal deformation,stress distribution and fault activity patterns,clarify active faults relationship with large earthquakes,and determine the potential maximum magnitude,epicenters,and risk range.This study provides basic data for understanding the activity,seismicity,and tectonic deformation patterns of the regional faults in the Sichuan-Tibet transport corridor.展开更多
China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major ...China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major controlling factors.This study compared the geological characteristics of various shales and analyzed the influences of different parameters on the formation and accumulation of shale gas.In general,shales in China’s several regions exhibit high total organic carbon(TOC)contents,which lays a sound material basis for shale gas generation.Marine strata generally show high degrees of thermal evolution.In contrast,continental shales manifest low degrees of thermal evolution,necessitating focusing on areas with relatively high degrees of thermal evolution in the process of shale gas surveys for these shales.The shales of the Wufeng and Silurian formations constitute the most favorable shale gas reservoirs since they exhibit the highest porosity among the three types of shales.These shales are followed by those in the Niutitang and Longtan formations.In contrast,the shales of the Doushantuo,Yanchang,and Qingshankou formations manifest low porosities.Furthermore,the shales of the Wufeng and Longmaxi formations exhibit high brittle mineral contents.Despite a low siliceous mineral content,the shales of the Doushantuo Formation feature a high carbonate mineral content,which can increase the shales’brittleness to some extent.For marine-continental transitional shales,where thin interbeds of tight sandstone with unequal thicknesses are generally found,it is recommended that fracturing combined with drainage of multiple sets of lithologic strata should be employed to enhance their shale gas production.展开更多
The well-developed coal electricity generation and coal chemical industries have led to huge carbon dioxide(CO_(2))emissions in the northeastern Ordos Basin.The geological storage of CO_(2) in saline aquifers is an ef...The well-developed coal electricity generation and coal chemical industries have led to huge carbon dioxide(CO_(2))emissions in the northeastern Ordos Basin.The geological storage of CO_(2) in saline aquifers is an effective backup way to achieve carbon neutrality.In this case,the potential of saline aquifers for CO_(2) storage serves as a critical basis for subsequent geological storage project.This study calculated the technical control capacities of CO_(2) of the saline aquifers in the fifth member of the Shiqianfeng Formation(the Qian-5 member)based on the statistical analysis of the logging and the drilling and core data from more than 200 wells in the northeastern Ordos Basin,as well as the sedimentary facies,formation lithology,and saline aquifer development patterns of the Qian-5 member.The results show that(1)the reservoirs of saline aquifers in the Qian-5 member,which comprise distributary channel sand bodies of deltaic plains,feature low porosities and permeabilities;(2)The study area hosts three NNE-directed saline aquifer zones,where saline aquifers generally have a single-layer thickness of 3‒8 m and a cumulative thickness of 8‒24 m;(3)The saline aquifers of the Qian-5 member have a total technical control capacity of CO_(2) of 119.25×10^(6) t.With the largest scale and the highest technical control capacity(accounting for 61%of the total technical control capacity),the Jinjie-Yulin saline aquifer zone is an important prospect area for the geological storage of CO_(2) in the saline aquifers of the Qian-5 member in the study area.展开更多
The purpose of this paper is to discuss the integration of the elements of civic and political education into the engineering geology course to improve students’ideological and moral qualities.It is proposed that by ...The purpose of this paper is to discuss the integration of the elements of civic and political education into the engineering geology course to improve students’ideological and moral qualities.It is proposed that by integrating elements of civic and political education,students are guided to form a positive attitude toward engineering practice as well as correct values and ethics.With regard to the teaching design and implementation of the course,the implementation paths of teacher team building,careful teaching design,innovative teaching methods,and the integration of civic and politics in practical teaching are proposed to summarize the significance of integrating the elements of civic and political education in the construction of the engineering geology course.It is pointed out that this integration not only improves the quality of the course,but also provides a reference for the civic and political education of other similar professional courses.This integration not only focuses on the teaching of professional knowledge,but also pays more attention to the cultivation of students’ideology and morality,which provides a model and guidance for shaping new talents with all-round development.展开更多
The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （ori...The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （original structural plane, tectonic structural plane and hypergenic structural plane） and the associated features of the Emeishan basalts and then studies the classification schemes of the built hydropower structure planes of different rock areas （the east district, the central district and the west district） in the Emeishan basalt distribution area, Southwest China. Based on the analysis and comparison of the scale and the engineering geological characteristics of the typical structure planes in the basalt hydroelectric Stations, the types of structural planes are used in the first order classification. The secondary order classification is made by considering the impact factors of rock mass quality, e.g., the state of the structural planes, infilling, joint opening, extending length, the grade of weathering and strength. The engineering geological classification for Emeishan basalt is proposed. Because there are no evidences of a large structure presenting in study area, the first-order （Ⅰ） controlling structural planes do not appear in the classification, there only appear Ⅱ, Ⅲ, Ⅳ and Ⅴ grade structural planes influencing the rock-mass quality. According to the different rock-block types in bedding fault zone, the second-grade （Ⅱ） structural planes consisted of bedding fault zone is further classified into Ⅱ1, Ⅱ2 and Ⅱ3. The third-grade （Ⅲ） structural planes constructed by intraformational faulted zones are not subdivided. According to the different characteristics of intrusion, alteration and weathering unloading structural planes, the Ⅳ grade structure plane is divided into Ⅳ1, Ⅳ2 and Ⅳ3. According to the development characteristics of joints and fractures, the V grade structure plane is divided into fracture Ⅴ1 and columnar joint Ⅴ2. In all, the structural planes are classified into four groups with nine subsets. The research proposes the engineering geological classification of the structural plane for the hydropower project in the Emishan basalts, and the result of the study has a potential application in similar regions.展开更多
This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaskanear Banska Bystrica in Slovakia.The aim of the study is to demonstrate the impossibility ...This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaskanear Banska Bystrica in Slovakia.The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material.Its maximum thickness is 3 m.Another specificific condition of the study area is its location in the built-up area,due to which the applicability of geophysical methods was limited.The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill,which complicates the identification of cave spaces.The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.展开更多
Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By ...Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By analyzing system structure,designing function modules and discussing data management,this paper systematically proposes a framework of technol-ogy to integrate,manage,and analyze the seabed information comprehensively. Then,the technology is applied to the design and development of the Bohai Sea Oilfield Paradigm Area Information System. The system can not only meet the practical demands of marine resources exploration and exploitation in the Bohai Sea oilfield,but also serve as a preparatory work in theory and technology for the realization of the 'Digital Seabed'.展开更多
The Jinsha River runs across the Hengduanshan north-south tectonic zone where neotectonism was relatively strong, accompanied by various geologic hazards. In this case, it seems necessary to make a quantitative assess...The Jinsha River runs across the Hengduanshan north-south tectonic zone where neotectonism was relatively strong, accompanied by various geologic hazards. In this case, it seems necessary to make a quantitative assessment and grading of the engineering geological environment for the planning and development of hydropower projects on the Jinsha River.展开更多
Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological enviro...Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological environments.The post-construction settlement of soft soil foundations are especially large and difficult to calculate.In addition,there are many deficiencies in the current methods used for engineering geological zoning.Focusing on the need of establishing engineering geological zoning for areas with soft soil foundations in the Tianjin Marine Economic Area,combination weighting and extension methods were introduced.An evaluation model for the settlement of soft soil foundations was established using multiple factors and large amounts of data.This evaluation model is accurate and objective for delineating engineering geological zoning.These methods eliminate deficiencies by considering both objective and subjective factors,and help obtain an objective and accurate result.展开更多
Based on previous evaluating methods, a new method which combines GIS with Fussy Clustering algorithm is proposed and applied in evaluating the engineering geological environment of the research area of XuZHou City in...Based on previous evaluating methods, a new method which combines GIS with Fussy Clustering algorithm is proposed and applied in evaluating the engineering geological environment of the research area of XuZHou City in this paper. By analyzing the characteristics and formation of engineering geological environment,the major problems are discussed, including stability of basement rock, sandy soil liquefaction and cultural stratum.According to effecting factors of these problems, the stability of every engineering geological problem in the worked area is classified into different classes. Then, the Fussy Clustering method is used in assessing all conditions of engineering geological environment. Finally, the evaluation is fulfilled in the whole studied area. The calculating result shows the method is feasible.展开更多
Ocean mining activities have been ongoing for nearly 70 years,making great contributions to industrialization.Given the increasing demand for energy,along with the restructuring of the energy supply catalyzed by effor...Ocean mining activities have been ongoing for nearly 70 years,making great contributions to industrialization.Given the increasing demand for energy,along with the restructuring of the energy supply catalyzed by efforts to achieve a low-carbon economy,deep seabed mining will play an important role in addressing energy-and resource-related problems in the future.However,deep seabed mining remains in the exploratory stage,with many challenges presented by the high-pressure,low-temperature,and complex geologic and hydrodynamic environments in deep-sea mining areas,which are inaccessible to human activities.Thus,considerable efforts are required to ensure sustainable,economic,reliable,and safe deep seabed mining.This study reviews the latest advances in marine engineering geology and the environment related to deep-sea min-ing activities,presents a bibliometric analysis of the development of ocean mineral resources since the 1950s,summarizes the development,theory,and issues related to techniques for the three stages of ocean mining(i.e.,exploration,extraction,and closure),and discusses the engineering geology environment,geological disasters,in-situ monitoring techniques,envi-ronmental protection requirements,and environmental effects in detail.Finally,this paper gives some key conclusions and future perspectives to provide insights for subsequent studies and commercial mining operations.展开更多
The Moravian karst belongs to one of the famous karst regions in Central Europe. It is situated in Moravia in the eastern part of the Czech Republic. According to the geology it is of Devonian age and the main rocks a...The Moravian karst belongs to one of the famous karst regions in Central Europe. It is situated in Moravia in the eastern part of the Czech Republic. According to the geology it is of Devonian age and the main rocks are of different types of limestones. The process of karstification is still active. They are many caves with rich stalagmites and stalactites and the Macocha abyss, the depth of which is 138.5 m. The underground Punkva River flows through the main part of the karst, forming beautiful underground lakes. Typical karst phenomena, such as sinkholes and deep canyons, may be observed on the surface of the terrain. Because of the karstification, water erosion and frost weathering, many steep unstable slopes and walls originated. To solve the stability from a geotechnical point of view is not easy. This requests a special engineering-geological knowledge and experience.展开更多
The Engineering Geological Map of the Sakha（Yakutia） Republic covers about 3 million kilometers which is one-fifth of the territory of Russia.The map displays ground and geocryological conditions and active faults.S...The Engineering Geological Map of the Sakha（Yakutia） Republic covers about 3 million kilometers which is one-fifth of the territory of Russia.The map displays ground and geocryological conditions and active faults.Seismic intensity,schemes of zoning by factors of engineering geological conditions,and the general scheme of engineering geological zoning of the Sakha（Yakutia） Republic or the SR（Y）,are shown on the inset maps.The map is required to provide information for planning,construction and exploitation of engineering structures in the SR（Y）.A distinguishing feature of the map is the indication of almost blanket distribution of the frozen ground class.Types of the frozen ground class are separated by lithology,while ground varieties are separated by temperature.Fresh and ultra-fresh suprapermafrost water is predominant within the territory.The compiled map indicates parts of the Arctic-Asian and Baikalo-Stanovoi planetary seismic belts that make engineering geological conditions more complicated.展开更多
In the stability study of the regional structures in the area of the Longyang Gorge Hydroelectrical Power Station, a model of the current stress-deformation field of the area was constructed based on analyses of avail...In the stability study of the regional structures in the area of the Longyang Gorge Hydroelectrical Power Station, a model of the current stress-deformation field of the area was constructed based on analyses of available data of regional surveys and historical earthquakes and field investigations of active faults and ancient earthquakes. This model was examined and verified by physical and mathematical simulation experiments, and quantitative relations and data were obtained.展开更多
There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection...There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection in Wudongde reservoir area of Jinshajiang River valley for example. In all engineering geological conditions,the chronologic age and attitude of strata,and the lithologic association factors control the distributions and evolvement characteristics of slope geological hazard in the studied area. The study shows that the slopes in geological evolution are in different stages. The conclusion helps to understand the types and the intensity of geological disasters.展开更多
A high efficiency method is very important in geological survey for a new city in China.Geophysical parameters are Measured While Drilling(MWD),and these parameters are processed and explained on the ground,so the met...A high efficiency method is very important in geological survey for a new city in China.Geophysical parameters are Measured While Drilling(MWD),and these parameters are processed and explained on the ground,so the method can replace conventional engineering geological exploration for drilling rock sample.According petroleum engineering MWD,using the different characters of different rock absorbs γ radial,with the method of storing data in hole and explaining data on the ground,engineering geological exploration formation density MWD is researched.The MWD works stabilized,and the performance is good with precise data.展开更多
Earth resources are the essential basis for an economy of a country and well-being of her citizens. Their exploitation is a key factor in economic growth and development of the nation, but one that can have serious ne...Earth resources are the essential basis for an economy of a country and well-being of her citizens. Their exploitation is a key factor in economic growth and development of the nation, but one that can have serious negative environmental and socio-economic impacts. Therefore it is important to understand their origin/occurrence and exploitation in terms of environmental sustainability. The human society has profited from exploitation of earth resources, precisely when energy use became much more efficient during the industrial era. Some of these earth resources (renewable and non-renewable) are oil and gas, coal, water, metal ore, wind, air etc. and their methods of exploitation are surface and subsurface mining methods [1]. Thus the geological perspectives of earth resources refer to origin and occurrence of these earth resources while the engineering perspectives refer to the processes involved in the extraction (mining), processing and utilization of the resources. To fulfill the requirement of sustainable development, the efficiency with which resources are utilized has to be improved. The main concerns associated with earth resources, therefore, are generally the costs and environmental impacts of extracting, transporting, and refining them. The economics of earth resources deals with the supply, demand and allocation of the resources.展开更多
Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conv...Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conventional inverse analysis cannot deal with uncertainty in geotechnical and geological systems.In this study,a framework was developed to evaluate and quantify uncertainty in inverse analysis based on the reduced-order model(ROM)and probabilistic programming.The ROM was utilized to capture the mechanical and deformation properties of surrounding rock mass in geomechanical problems.Probabilistic programming was employed to evaluate uncertainty during construction in geotechnical engineering.A circular tunnel was then used to illustrate the proposed framework using analytical and numerical solution.The results show that the geomechanical parameters and associated uncertainty can be properly obtained and the proposed framework can capture the mechanical behaviors under uncertainty.Then,a slope case was employed to demonstrate the performance of the developed framework.The results prove that the proposed framework provides a scientific,feasible,and effective tool to characterize the properties and physical mechanism of geomaterials under uncertainty in geotechnical engineering problems.展开更多
Loess has distinctive characteristics,leading to frequent landslide disasters and posing serious threats to the lives and properties of local re sidents.The involvement of water repre sents a critical factor in induci...Loess has distinctive characteristics,leading to frequent landslide disasters and posing serious threats to the lives and properties of local re sidents.The involvement of water repre sents a critical factor in inducing loess landslides.This study focuses on three neighboring cities sequentially situated on the Loess Plateau along the direction of aeolian deposition of loess,namely Lanzhou,Dingxi,and Tianshui,which are densely populated and prone to landslide disasters.The variations in hydraulic properties,including water retention capacity and permeability,are investigated through Soil Water Characteristic Curve(SWCC)test and hydraulic conductivity test.The experimental findings revealed that Tianshui loess exhibited the highest water retention capacity,followed by Dingxi loess,while Lanzhou loess demonstrated the lowest water retention capacity.Contrastingly,the results for the saturated permeability coefficient were found to be the opposite:Tianshui loess showed the lowest permeability,whereas Lanzhou loess displayed the highest permeability.These results are supported and analyzed by scanning electron microscopy(SEM)observation.In addition,the water retention capacity is mathematically expressed using the van Genuchten model and extended to predict unsaturated hydraulic properties of loess.The experimental results exhibit a strong accordance with one another and align with the regional distribution patterns of disasters.展开更多
基金supported by the National Natural Science Foundation of China(42177184)the Balance Research Funds of the Chinese Academy of Geological Sciences(60)the China Geological Survey(DD20221816)。
文摘At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 earthquake,which has very strong seismic activity.Therefore,carrying out engineering construction in the Sichuan-Tibet transport corridor is a huge challenge for geological technological personnel.To determining the spatial geometric distribution,activity of active faults and geological safety risk in the Sichuan-Tibet transport corridor.Based on remote sensing images,ground surveys,and chronological tests,as well as the deep geophysical and current GPS data,we investigated the geometry,segmentation,and paleoearthquake history of five major active fault zones in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,namely the Xianshuihe,Litang,Batang,Jiali-Chayu and Lulang-Yigong.The five major fault zones are all Holocene active faults,which contain strike-slip components as well as thrust or normal fault components,and contain multiple branch faults.The Selaha-Kangding segment of the Xianshuihe fault zone,the Maoyaba and Litang segment of the Litang fault zone,the middle segment(Yigong-Tongmai-Bomi)of Jiali-Chayu fault zone and Lulang-Yigong fault zone have the risk of experiencing strong earthquakes in the future,with a high possibility of the occurrence of MS≥7.0 earthquakes.The Jinsha River and the Palong-Zangbu River,which is a high-risk area for geological hazard chain risk in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor.Construction and safe operation Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,need strengthen analysis the current crustal deformation,stress distribution and fault activity patterns,clarify active faults relationship with large earthquakes,and determine the potential maximum magnitude,epicenters,and risk range.This study provides basic data for understanding the activity,seismicity,and tectonic deformation patterns of the regional faults in the Sichuan-Tibet transport corridor.
基金supported by the project of the China Geological Survey for shale gas in Southern China(DD20221852)the National Natural Science Foundation of China(42242010,U2244208)。
文摘China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major controlling factors.This study compared the geological characteristics of various shales and analyzed the influences of different parameters on the formation and accumulation of shale gas.In general,shales in China’s several regions exhibit high total organic carbon(TOC)contents,which lays a sound material basis for shale gas generation.Marine strata generally show high degrees of thermal evolution.In contrast,continental shales manifest low degrees of thermal evolution,necessitating focusing on areas with relatively high degrees of thermal evolution in the process of shale gas surveys for these shales.The shales of the Wufeng and Silurian formations constitute the most favorable shale gas reservoirs since they exhibit the highest porosity among the three types of shales.These shales are followed by those in the Niutitang and Longtan formations.In contrast,the shales of the Doushantuo,Yanchang,and Qingshankou formations manifest low porosities.Furthermore,the shales of the Wufeng and Longmaxi formations exhibit high brittle mineral contents.Despite a low siliceous mineral content,the shales of the Doushantuo Formation feature a high carbonate mineral content,which can increase the shales’brittleness to some extent.For marine-continental transitional shales,where thin interbeds of tight sandstone with unequal thicknesses are generally found,it is recommended that fracturing combined with drainage of multiple sets of lithologic strata should be employed to enhance their shale gas production.
基金funded by the Top 10 key scientific and technological projects of CHN Energy in 2021 entitled Research and Demonstration of Technology for Carbon Dioxide Capture and Energy Recycling Utilization(GJNYKJ[2021]No.128,No.:GJNY-21-51)the Carbon Neutrality College(Yulin)Northwest University project entitled Design and research of large-scale CCUS cluster construction in Yulin area,Shaanxi Province(YL2022-38-01).
文摘The well-developed coal electricity generation and coal chemical industries have led to huge carbon dioxide(CO_(2))emissions in the northeastern Ordos Basin.The geological storage of CO_(2) in saline aquifers is an effective backup way to achieve carbon neutrality.In this case,the potential of saline aquifers for CO_(2) storage serves as a critical basis for subsequent geological storage project.This study calculated the technical control capacities of CO_(2) of the saline aquifers in the fifth member of the Shiqianfeng Formation(the Qian-5 member)based on the statistical analysis of the logging and the drilling and core data from more than 200 wells in the northeastern Ordos Basin,as well as the sedimentary facies,formation lithology,and saline aquifer development patterns of the Qian-5 member.The results show that(1)the reservoirs of saline aquifers in the Qian-5 member,which comprise distributary channel sand bodies of deltaic plains,feature low porosities and permeabilities;(2)The study area hosts three NNE-directed saline aquifer zones,where saline aquifers generally have a single-layer thickness of 3‒8 m and a cumulative thickness of 8‒24 m;(3)The saline aquifers of the Qian-5 member have a total technical control capacity of CO_(2) of 119.25×10^(6) t.With the largest scale and the highest technical control capacity(accounting for 61%of the total technical control capacity),the Jinjie-Yulin saline aquifer zone is an important prospect area for the geological storage of CO_(2) in the saline aquifers of the Qian-5 member in the study area.
文摘The purpose of this paper is to discuss the integration of the elements of civic and political education into the engineering geology course to improve students’ideological and moral qualities.It is proposed that by integrating elements of civic and political education,students are guided to form a positive attitude toward engineering practice as well as correct values and ethics.With regard to the teaching design and implementation of the course,the implementation paths of teacher team building,careful teaching design,innovative teaching methods,and the integration of civic and politics in practical teaching are proposed to summarize the significance of integrating the elements of civic and political education in the construction of the engineering geology course.It is pointed out that this integration not only improves the quality of the course,but also provides a reference for the civic and political education of other similar professional courses.This integration not only focuses on the teaching of professional knowledge,but also pays more attention to the cultivation of students’ideology and morality,which provides a model and guidance for shaping new talents with all-round development.
基金funded by the National Natural Science Foundation of China (Grant No.41072228)
文摘The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （original structural plane, tectonic structural plane and hypergenic structural plane） and the associated features of the Emeishan basalts and then studies the classification schemes of the built hydropower structure planes of different rock areas （the east district, the central district and the west district） in the Emeishan basalt distribution area, Southwest China. Based on the analysis and comparison of the scale and the engineering geological characteristics of the typical structure planes in the basalt hydroelectric Stations, the types of structural planes are used in the first order classification. The secondary order classification is made by considering the impact factors of rock mass quality, e.g., the state of the structural planes, infilling, joint opening, extending length, the grade of weathering and strength. The engineering geological classification for Emeishan basalt is proposed. Because there are no evidences of a large structure presenting in study area, the first-order （Ⅰ） controlling structural planes do not appear in the classification, there only appear Ⅱ, Ⅲ, Ⅳ and Ⅴ grade structural planes influencing the rock-mass quality. According to the different rock-block types in bedding fault zone, the second-grade （Ⅱ） structural planes consisted of bedding fault zone is further classified into Ⅱ1, Ⅱ2 and Ⅱ3. The third-grade （Ⅲ） structural planes constructed by intraformational faulted zones are not subdivided. According to the different characteristics of intrusion, alteration and weathering unloading structural planes, the Ⅳ grade structure plane is divided into Ⅳ1, Ⅳ2 and Ⅳ3. According to the development characteristics of joints and fractures, the V grade structure plane is divided into fracture Ⅴ1 and columnar joint Ⅴ2. In all, the structural planes are classified into four groups with nine subsets. The research proposes the engineering geological classification of the structural plane for the hydropower project in the Emishan basalts, and the result of the study has a potential application in similar regions.
基金the support of the project(SP2017/22)which is the base of this articlepartially supported by the Slovak Research and Development Agency under contract No.APVV-0129-12the Scientific Grant Agency of the Ministry of Education,Science,Research and Sport of the Slovak Republic and the Slovak Academy of Sciences(VEGA)within the project No.1/0559/17 and APVV 1/0462/16。
文摘This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaskanear Banska Bystrica in Slovakia.The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material.Its maximum thickness is 3 m.Another specificific condition of the study area is its location in the built-up area,due to which the applicability of geophysical methods was limited.The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill,which complicates the identification of cave spaces.The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.
文摘Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By analyzing system structure,designing function modules and discussing data management,this paper systematically proposes a framework of technol-ogy to integrate,manage,and analyze the seabed information comprehensively. Then,the technology is applied to the design and development of the Bohai Sea Oilfield Paradigm Area Information System. The system can not only meet the practical demands of marine resources exploration and exploitation in the Bohai Sea oilfield,but also serve as a preparatory work in theory and technology for the realization of the 'Digital Seabed'.
基金This study was supported by CAS project kz952-J1-416.
文摘The Jinsha River runs across the Hengduanshan north-south tectonic zone where neotectonism was relatively strong, accompanied by various geologic hazards. In this case, it seems necessary to make a quantitative assessment and grading of the engineering geological environment for the planning and development of hydropower projects on the Jinsha River.
基金National Natural Science Foundations of China(Nos.41172236,41402243)
文摘Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological environments.The post-construction settlement of soft soil foundations are especially large and difficult to calculate.In addition,there are many deficiencies in the current methods used for engineering geological zoning.Focusing on the need of establishing engineering geological zoning for areas with soft soil foundations in the Tianjin Marine Economic Area,combination weighting and extension methods were introduced.An evaluation model for the settlement of soft soil foundations was established using multiple factors and large amounts of data.This evaluation model is accurate and objective for delineating engineering geological zoning.These methods eliminate deficiencies by considering both objective and subjective factors,and help obtain an objective and accurate result.
文摘Based on previous evaluating methods, a new method which combines GIS with Fussy Clustering algorithm is proposed and applied in evaluating the engineering geological environment of the research area of XuZHou City in this paper. By analyzing the characteristics and formation of engineering geological environment,the major problems are discussed, including stability of basement rock, sandy soil liquefaction and cultural stratum.According to effecting factors of these problems, the stability of every engineering geological problem in the worked area is classified into different classes. Then, the Fussy Clustering method is used in assessing all conditions of engineering geological environment. Finally, the evaluation is fulfilled in the whole studied area. The calculating result shows the method is feasible.
基金Funding for this research was provided by the National Natural Science Foundation of China (42022052,42277138,and 52108337)the National Key R&D Program of China (2022YFC2803800)+1 种基金the Shandong Provincial Natural Science Foundation (ZR2020YQ29)UCL's Department of Civil,Environmental and Geomatic Engineering,and Ocean University of China.
文摘Ocean mining activities have been ongoing for nearly 70 years,making great contributions to industrialization.Given the increasing demand for energy,along with the restructuring of the energy supply catalyzed by efforts to achieve a low-carbon economy,deep seabed mining will play an important role in addressing energy-and resource-related problems in the future.However,deep seabed mining remains in the exploratory stage,with many challenges presented by the high-pressure,low-temperature,and complex geologic and hydrodynamic environments in deep-sea mining areas,which are inaccessible to human activities.Thus,considerable efforts are required to ensure sustainable,economic,reliable,and safe deep seabed mining.This study reviews the latest advances in marine engineering geology and the environment related to deep-sea min-ing activities,presents a bibliometric analysis of the development of ocean mineral resources since the 1950s,summarizes the development,theory,and issues related to techniques for the three stages of ocean mining(i.e.,exploration,extraction,and closure),and discusses the engineering geology environment,geological disasters,in-situ monitoring techniques,envi-ronmental protection requirements,and environmental effects in detail.Finally,this paper gives some key conclusions and future perspectives to provide insights for subsequent studies and commercial mining operations.
文摘The Moravian karst belongs to one of the famous karst regions in Central Europe. It is situated in Moravia in the eastern part of the Czech Republic. According to the geology it is of Devonian age and the main rocks are of different types of limestones. The process of karstification is still active. They are many caves with rich stalagmites and stalactites and the Macocha abyss, the depth of which is 138.5 m. The underground Punkva River flows through the main part of the karst, forming beautiful underground lakes. Typical karst phenomena, such as sinkholes and deep canyons, may be observed on the surface of the terrain. Because of the karstification, water erosion and frost weathering, many steep unstable slopes and walls originated. To solve the stability from a geotechnical point of view is not easy. This requests a special engineering-geological knowledge and experience.
文摘The Engineering Geological Map of the Sakha（Yakutia） Republic covers about 3 million kilometers which is one-fifth of the territory of Russia.The map displays ground and geocryological conditions and active faults.Seismic intensity,schemes of zoning by factors of engineering geological conditions,and the general scheme of engineering geological zoning of the Sakha（Yakutia） Republic or the SR（Y）,are shown on the inset maps.The map is required to provide information for planning,construction and exploitation of engineering structures in the SR（Y）.A distinguishing feature of the map is the indication of almost blanket distribution of the frozen ground class.Types of the frozen ground class are separated by lithology,while ground varieties are separated by temperature.Fresh and ultra-fresh suprapermafrost water is predominant within the territory.The compiled map indicates parts of the Arctic-Asian and Baikalo-Stanovoi planetary seismic belts that make engineering geological conditions more complicated.
文摘In the stability study of the regional structures in the area of the Longyang Gorge Hydroelectrical Power Station, a model of the current stress-deformation field of the area was constructed based on analyses of available data of regional surveys and historical earthquakes and field investigations of active faults and ancient earthquakes. This model was examined and verified by physical and mathematical simulation experiments, and quantitative relations and data were obtained.
文摘There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection in Wudongde reservoir area of Jinshajiang River valley for example. In all engineering geological conditions,the chronologic age and attitude of strata,and the lithologic association factors control the distributions and evolvement characteristics of slope geological hazard in the studied area. The study shows that the slopes in geological evolution are in different stages. The conclusion helps to understand the types and the intensity of geological disasters.
文摘A high efficiency method is very important in geological survey for a new city in China.Geophysical parameters are Measured While Drilling(MWD),and these parameters are processed and explained on the ground,so the method can replace conventional engineering geological exploration for drilling rock sample.According petroleum engineering MWD,using the different characters of different rock absorbs γ radial,with the method of storing data in hole and explaining data on the ground,engineering geological exploration formation density MWD is researched.The MWD works stabilized,and the performance is good with precise data.
文摘Earth resources are the essential basis for an economy of a country and well-being of her citizens. Their exploitation is a key factor in economic growth and development of the nation, but one that can have serious negative environmental and socio-economic impacts. Therefore it is important to understand their origin/occurrence and exploitation in terms of environmental sustainability. The human society has profited from exploitation of earth resources, precisely when energy use became much more efficient during the industrial era. Some of these earth resources (renewable and non-renewable) are oil and gas, coal, water, metal ore, wind, air etc. and their methods of exploitation are surface and subsurface mining methods [1]. Thus the geological perspectives of earth resources refer to origin and occurrence of these earth resources while the engineering perspectives refer to the processes involved in the extraction (mining), processing and utilization of the resources. To fulfill the requirement of sustainable development, the efficiency with which resources are utilized has to be improved. The main concerns associated with earth resources, therefore, are generally the costs and environmental impacts of extracting, transporting, and refining them. The economics of earth resources deals with the supply, demand and allocation of the resources.
基金The authors gratefully acknowledge the support from the National Natural Science Foundation of China(Grant No.42377174)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2022ME198)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020006).
文摘Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conventional inverse analysis cannot deal with uncertainty in geotechnical and geological systems.In this study,a framework was developed to evaluate and quantify uncertainty in inverse analysis based on the reduced-order model(ROM)and probabilistic programming.The ROM was utilized to capture the mechanical and deformation properties of surrounding rock mass in geomechanical problems.Probabilistic programming was employed to evaluate uncertainty during construction in geotechnical engineering.A circular tunnel was then used to illustrate the proposed framework using analytical and numerical solution.The results show that the geomechanical parameters and associated uncertainty can be properly obtained and the proposed framework can capture the mechanical behaviors under uncertainty.Then,a slope case was employed to demonstrate the performance of the developed framework.The results prove that the proposed framework provides a scientific,feasible,and effective tool to characterize the properties and physical mechanism of geomaterials under uncertainty in geotechnical engineering problems.
基金the financial support for the research presented in this paper from National Natural Science Foundation of China(42201142,42067066,51778590)。
文摘Loess has distinctive characteristics,leading to frequent landslide disasters and posing serious threats to the lives and properties of local re sidents.The involvement of water repre sents a critical factor in inducing loess landslides.This study focuses on three neighboring cities sequentially situated on the Loess Plateau along the direction of aeolian deposition of loess,namely Lanzhou,Dingxi,and Tianshui,which are densely populated and prone to landslide disasters.The variations in hydraulic properties,including water retention capacity and permeability,are investigated through Soil Water Characteristic Curve(SWCC)test and hydraulic conductivity test.The experimental findings revealed that Tianshui loess exhibited the highest water retention capacity,followed by Dingxi loess,while Lanzhou loess demonstrated the lowest water retention capacity.Contrastingly,the results for the saturated permeability coefficient were found to be the opposite:Tianshui loess showed the lowest permeability,whereas Lanzhou loess displayed the highest permeability.These results are supported and analyzed by scanning electron microscopy(SEM)observation.In addition,the water retention capacity is mathematically expressed using the van Genuchten model and extended to predict unsaturated hydraulic properties of loess.The experimental results exhibit a strong accordance with one another and align with the regional distribution patterns of disasters.
