The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly af...The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.展开更多
Heat setting has important effects on mechanical and structural properties of polypropylene( PP) mesh. However,there is no systematic study on the effects of heat setting. In this paper,the orthogonal array was design...Heat setting has important effects on mechanical and structural properties of polypropylene( PP) mesh. However,there is no systematic study on the effects of heat setting. In this paper,the orthogonal array was designed for heat setting,and the influences of heat setting on structural, mechanical properties and flexural rigidity of PP mesh were studied. The experimental results showed that temperature had larger influence than tension and time on thickness,tensile strength,bursting strength, tear strength and bending stiffness of PP meshes, except the fabric weight. The optimum heat setting parameters were as follows: temperature was120 ℃, time was 10 min,and tension was small. These results will provide guideline for the selection of heat setting parameters.展开更多
In order to meet the curative effect,the glove of the flexible medical orthosis was designed to use nylon / spandex and polyester / spandex covered yarns to knit the glove by parts.For the purpose of confirming the be...In order to meet the curative effect,the glove of the flexible medical orthosis was designed to use nylon / spandex and polyester / spandex covered yarns to knit the glove by parts.For the purpose of confirming the best heat setting technology of the glove knitted by multicomponent materials, different heat setting technologies with different temperature and time were tested on the nylon / spandex and the polyester / spandex knitted fabrics.And the effects of the heat setting technology on dimensional stability and elastic recovery of the two kinds of fabrics were analyzed as well.The results show that in the proper range of temperature and time,dimensional stability and elastic recovery of the nylon / spandex knitted fabric become better with the increases of temperature and time.And dimensional stability of the polyester / spandex knitted fabric also turns good.But its elastic recovery doesn't change obviously.All the measured values were compared with each other.And the results indicate that dimensional stability and elastic recovery of these two kinds of fabrics both are great after the heat setting technology of temperature 180 ℃ and time 60 s.展开更多
We give heat kernel estimates on Julia sets J（f;） for quadratic polynomials f c（z） = z;+ c for c in the main cardioid or the ±1/k-bulbs where k ≥ 2. First we use external ray parametrization to construct a r...We give heat kernel estimates on Julia sets J（f;） for quadratic polynomials f c（z） = z;+ c for c in the main cardioid or the ±1/k-bulbs where k ≥ 2. First we use external ray parametrization to construct a regular, strongly local and conservative Dirichlet form on Julia set. Then we show that this Dirichlet form is a resistance form and the corresponding resistance metric induces the same topology as Euclidean metric. Finally, we give heat kernel estimates under the resistance metric.展开更多
In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isotherma...In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isothermally calorimetric experiment is put forward. The experimental results indicated that: the magnitude of first peak of heat evolution varies from sample to sample, correlation between heat evolution during first peak of heat evolution and initial (as well as final) setting time is unsatisfactory when samples are not classified; while groups of sample classified based on strength grade represent satisfactory correlations, which indicating the existence of close relation between hydration heat evolution in much earlier hydration age and setting property of cement in rather later age. Importance of first peak in hydration heat evolution for understanding cement setting property and reasons for sample classification are also discussed in this paper.展开更多
General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In thi...General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In this study, domestic medical PP monofilament was selected as raw material whose diameter was 0.15 mm, and the patch was knitted in the warp knitting machine of 12E gauge with one bar. Using the method of orthogonal experiment with three factors and three levels, the best heat-setting process of PP mesh was determined at the temperature of 130 ~C with 10 min under tension-free conditions. The relationship between heat-setting tension and performance of the patch was discussed. Patches with different porosity were prepared, and then structural parameters including density, thickness, porosity, and mechanical properties including tensile breaking strength, bursting strength, tearing strength, flexural rigidity and suture pulling out strength were tested and compared. The experimental results show that： the smaller of the patch＇s density, the higher of the porosity; other properties including density, thickness, bending stiffness, tensile breaking strength, bursting strength, tear strength, and suture pulling out strength reduce in varying degrees. This different degree of reduction is worth summarizing.展开更多
基金National Natural Science Foundation of China(No.62173307)the Key R&D Projects of Science and Technology Department of Zhejiang Province,China(Nos.2023C01158,2022C01065 and 2022C01188)the Fundamental Research Funds of Zhejiang Sci-Tech University,China(No.22242298-Y)。
文摘The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.
基金National Natural Science Foundation of China(Nos.11472077,U1537213)the National Key Research and Development Program of China(No.2016YFB0303303)
文摘Heat setting has important effects on mechanical and structural properties of polypropylene( PP) mesh. However,there is no systematic study on the effects of heat setting. In this paper,the orthogonal array was designed for heat setting,and the influences of heat setting on structural, mechanical properties and flexural rigidity of PP mesh were studied. The experimental results showed that temperature had larger influence than tension and time on thickness,tensile strength,bursting strength, tear strength and bending stiffness of PP meshes, except the fabric weight. The optimum heat setting parameters were as follows: temperature was120 ℃, time was 10 min,and tension was small. These results will provide guideline for the selection of heat setting parameters.
基金the 12th Five-Year Plan Supporting Project of Ministry of Science and Technology,China(No.2013BAI10B03)
文摘In order to meet the curative effect,the glove of the flexible medical orthosis was designed to use nylon / spandex and polyester / spandex covered yarns to knit the glove by parts.For the purpose of confirming the best heat setting technology of the glove knitted by multicomponent materials, different heat setting technologies with different temperature and time were tested on the nylon / spandex and the polyester / spandex knitted fabrics.And the effects of the heat setting technology on dimensional stability and elastic recovery of the two kinds of fabrics were analyzed as well.The results show that in the proper range of temperature and time,dimensional stability and elastic recovery of the nylon / spandex knitted fabric become better with the increases of temperature and time.And dimensional stability of the polyester / spandex knitted fabric also turns good.But its elastic recovery doesn't change obviously.All the measured values were compared with each other.And the results indicate that dimensional stability and elastic recovery of these two kinds of fabrics both are great after the heat setting technology of temperature 180 ℃ and time 60 s.
文摘We give heat kernel estimates on Julia sets J（f;） for quadratic polynomials f c（z） = z;+ c for c in the main cardioid or the ±1/k-bulbs where k ≥ 2. First we use external ray parametrization to construct a regular, strongly local and conservative Dirichlet form on Julia set. Then we show that this Dirichlet form is a resistance form and the corresponding resistance metric induces the same topology as Euclidean metric. Finally, we give heat kernel estimates under the resistance metric.
基金Funded by Guangxi Science Foundation(No. 0639006)
文摘In order to veritably measure the first peak of hydration heat evolution that has been illustrated important in indicating cement behavior in early hydration, an improved way of water addition into cement in isothermally calorimetric experiment is put forward. The experimental results indicated that: the magnitude of first peak of heat evolution varies from sample to sample, correlation between heat evolution during first peak of heat evolution and initial (as well as final) setting time is unsatisfactory when samples are not classified; while groups of sample classified based on strength grade represent satisfactory correlations, which indicating the existence of close relation between hydration heat evolution in much earlier hydration age and setting property of cement in rather later age. Importance of first peak in hydration heat evolution for understanding cement setting property and reasons for sample classification are also discussed in this paper.
文摘General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In this study, domestic medical PP monofilament was selected as raw material whose diameter was 0.15 mm, and the patch was knitted in the warp knitting machine of 12E gauge with one bar. Using the method of orthogonal experiment with three factors and three levels, the best heat-setting process of PP mesh was determined at the temperature of 130 ~C with 10 min under tension-free conditions. The relationship between heat-setting tension and performance of the patch was discussed. Patches with different porosity were prepared, and then structural parameters including density, thickness, porosity, and mechanical properties including tensile breaking strength, bursting strength, tearing strength, flexural rigidity and suture pulling out strength were tested and compared. The experimental results show that： the smaller of the patch＇s density, the higher of the porosity; other properties including density, thickness, bending stiffness, tensile breaking strength, bursting strength, tear strength, and suture pulling out strength reduce in varying degrees. This different degree of reduction is worth summarizing.
