In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effec...In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.展开更多
A family of coat circuits for SEPIC converters to improve their boost capability is presented.The present coat circuit does not contain any active switches,so the voltage conversion ratio of the presented converters c...A family of coat circuits for SEPIC converters to improve their boost capability is presented.The present coat circuit does not contain any active switches,so the voltage conversion ratio of the presented converters can be enhanced without complicating its gate driver and control circuits.Meanwhile,because of the expansibility of the coat circuit,the number of its basic cells can be adjusted regarding the actual application requirements.Moreover,in comparison with a conventional SEPIC converter,voltage stress on power switch and diodes of the presented topology is lower at the same output voltage,and thus semiconductor components with low on-resistance are chosen to improve conversion efficiency of converter.The operational principle and steady state analysis of the SEPIC converter with one of the proposed coat circuits have been discussed in detail,and a 300W laboratory prototype is implemented to prove the theoretical analysis of presented converter.展开更多
Heterogeneous complementary inverters composed of bi-layer molybdenum disulfide （MoS2） and single-walled carbon-nanotube （SWCNT） networks are designed, and n-type MoS2/p-type SWCNT inverters are fabricated with a ...Heterogeneous complementary inverters composed of bi-layer molybdenum disulfide （MoS2） and single-walled carbon-nanotube （SWCNT） networks are designed, and n-type MoS2/p-type SWCNT inverters are fabricated with a backgated structure. Field-effect transistors （FETs） based on the MoS2 and SWCNT networks show high electrical performance with large ON/OFF ratios up to 106 and 105 for MoS2 and SWCNT, respectively. The MoS2/SWCNT complementary inverters exhibit Vin-Vout signal matching and achieve excellent performances with a high peak voltage gain of 15, a low static-power consumption of a few nanowatts, and a high noise margin of 0.45VDD, which are suitable for future logic-circuit applications. The inverter performances are affected by the channel width-to-length ratios （W/L） of the MOSR-FETs and SWCNT-FETs. Therefore, W/L should be optimized to achieve a tradeoff between the gain and the power consumption.展开更多
Aiming to integrate the respective merits of the switched-capacitor converter and the quasi-Z-source converter. An novel high step-up quasi-Z-source DC–DC converter with a single switched-capacitor branch is proposed...Aiming to integrate the respective merits of the switched-capacitor converter and the quasi-Z-source converter. An novel high step-up quasi-Z-source DC–DC converter with a single switched-capacitor branch is proposed. Compared to other high boost DC–DC converters,the proposed converter can provide higher output voltage gain, lower current stress across the switches, and lower voltage stress across the output diodes by using the same or similar passive and active components. Therefore, the efficiency and reliability of the converter can be improved.The topological derivation, operating principle, parameter selection, and comparison with other DC–DC converters are presented. Finally, both simulations and experimental results are given to verify the characteristics of the proposed converter.展开更多
A non-isolated high gain step-up DC-DC converter for low power applications is suggested in this study.In the designed transformerless converter,the main switch current and voltage stress is reduced while maintaining ...A non-isolated high gain step-up DC-DC converter for low power applications is suggested in this study.In the designed transformerless converter,the main switch current and voltage stress is reduced while maintaining high voltage gain.For instance,with a duty cycle of 0.5 a voltage gain equal to 5 is achieved while the normalized switch voltage stress is 0.4.Also,it decreases power losses of active and passive elements.In the proposed converter design,the switched-capacitor(SC)technique is used to obtain maximum voltage transfer gain using only one switch.The three modes of operation,i.e.,continuous conduction mode(CCM),boundary conduction mode(BCM),and discontinuous conduction mode(DCM),are studied in detail.The small signal analysis(SSA)of the designed converter is investigated,and its steady-state model is examined under CCM.Performance of the proposed converter proposed in this study is assessed and tested using a prototype.Efficiency of the converter is recorded above 94%in a wide range of output powers.Overall,compared to the other converters,the results suggest satisfactory performance of the designed converter.An issue of the proposed converter is that its input current is not smooth due to using the switched-capacitor cell in its structure.This issue is alleviated by using input filters.展开更多
In this paper,a DC-DC multi-port converter is introduced by integrating a super-lift and a buck converter(SLBC).The proposed single-input dual-output(SIDO)converter has conventional positive output voltage super-lift ...In this paper,a DC-DC multi-port converter is introduced by integrating a super-lift and a buck converter(SLBC).The proposed single-input dual-output(SIDO)converter has conventional positive output voltage super-lift advantages while simultaneously generating a step・up voltage by Luo・converter and a step-down voltage by the buck converter.In this structure,without utilizing electromagnetic components to generate a dual output,the ripple in output voltages is kept low.Meanwhile,the introduced SLBC has a simple structure and an appropriate control method providing a wide range of output voltages.Besides,to illustrate the advantages of the proposed SIDO converter,a comparison with other similar configurations is carried out.Also,simulation and experiment results indicate a considerable reduction in conduction losses compared to other SIDO converters in the same situations.The operation accuracy of SLBC is validated by performing several simulations in PSCAD/EMTDC software and testing a 150W prototype in the laboratory.展开更多
基金This work was supported by China Railway Corporation Science and Technology Research and Development Project(P2021J038).
文摘In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.
基金supported in part by the National Natural Science Foundation of China(51707103)in part by Guangxi Key Research and Development Program(2022AB05028).
文摘A family of coat circuits for SEPIC converters to improve their boost capability is presented.The present coat circuit does not contain any active switches,so the voltage conversion ratio of the presented converters can be enhanced without complicating its gate driver and control circuits.Meanwhile,because of the expansibility of the coat circuit,the number of its basic cells can be adjusted regarding the actual application requirements.Moreover,in comparison with a conventional SEPIC converter,voltage stress on power switch and diodes of the presented topology is lower at the same output voltage,and thus semiconductor components with low on-resistance are chosen to improve conversion efficiency of converter.The operational principle and steady state analysis of the SEPIC converter with one of the proposed coat circuits have been discussed in detail,and a 300W laboratory prototype is implemented to prove the theoretical analysis of presented converter.
基金Acknowledgements This work was supported by the National Natural Science Foundation of China （Nos. 51672154, 51372130, and 61401251）, Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics （No. KF201517）, and Open Foundation of State Key Laboratory of Electronic Thin Films and Integrated Devices （No. KFJJ201402）.
文摘Heterogeneous complementary inverters composed of bi-layer molybdenum disulfide （MoS2） and single-walled carbon-nanotube （SWCNT） networks are designed, and n-type MoS2/p-type SWCNT inverters are fabricated with a backgated structure. Field-effect transistors （FETs） based on the MoS2 and SWCNT networks show high electrical performance with large ON/OFF ratios up to 106 and 105 for MoS2 and SWCNT, respectively. The MoS2/SWCNT complementary inverters exhibit Vin-Vout signal matching and achieve excellent performances with a high peak voltage gain of 15, a low static-power consumption of a few nanowatts, and a high noise margin of 0.45VDD, which are suitable for future logic-circuit applications. The inverter performances are affected by the channel width-to-length ratios （W/L） of the MOSR-FETs and SWCNT-FETs. Therefore, W/L should be optimized to achieve a tradeoff between the gain and the power consumption.
基金supported by the Key Program of National Natural Science Foundation of China(No.51437005)
文摘Aiming to integrate the respective merits of the switched-capacitor converter and the quasi-Z-source converter. An novel high step-up quasi-Z-source DC–DC converter with a single switched-capacitor branch is proposed. Compared to other high boost DC–DC converters,the proposed converter can provide higher output voltage gain, lower current stress across the switches, and lower voltage stress across the output diodes by using the same or similar passive and active components. Therefore, the efficiency and reliability of the converter can be improved.The topological derivation, operating principle, parameter selection, and comparison with other DC–DC converters are presented. Finally, both simulations and experimental results are given to verify the characteristics of the proposed converter.
文摘A non-isolated high gain step-up DC-DC converter for low power applications is suggested in this study.In the designed transformerless converter,the main switch current and voltage stress is reduced while maintaining high voltage gain.For instance,with a duty cycle of 0.5 a voltage gain equal to 5 is achieved while the normalized switch voltage stress is 0.4.Also,it decreases power losses of active and passive elements.In the proposed converter design,the switched-capacitor(SC)technique is used to obtain maximum voltage transfer gain using only one switch.The three modes of operation,i.e.,continuous conduction mode(CCM),boundary conduction mode(BCM),and discontinuous conduction mode(DCM),are studied in detail.The small signal analysis(SSA)of the designed converter is investigated,and its steady-state model is examined under CCM.Performance of the proposed converter proposed in this study is assessed and tested using a prototype.Efficiency of the converter is recorded above 94%in a wide range of output powers.Overall,compared to the other converters,the results suggest satisfactory performance of the designed converter.An issue of the proposed converter is that its input current is not smooth due to using the switched-capacitor cell in its structure.This issue is alleviated by using input filters.
文摘In this paper,a DC-DC multi-port converter is introduced by integrating a super-lift and a buck converter(SLBC).The proposed single-input dual-output(SIDO)converter has conventional positive output voltage super-lift advantages while simultaneously generating a step・up voltage by Luo・converter and a step-down voltage by the buck converter.In this structure,without utilizing electromagnetic components to generate a dual output,the ripple in output voltages is kept low.Meanwhile,the introduced SLBC has a simple structure and an appropriate control method providing a wide range of output voltages.Besides,to illustrate the advantages of the proposed SIDO converter,a comparison with other similar configurations is carried out.Also,simulation and experiment results indicate a considerable reduction in conduction losses compared to other SIDO converters in the same situations.The operation accuracy of SLBC is validated by performing several simulations in PSCAD/EMTDC software and testing a 150W prototype in the laboratory.
