The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, la...The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, large burial depth, and strong heterogeneity under the control of faulting and karstification. Based on geological, logging, and seismic data, this study classified the Ordovician fault-karst reservoirs in the Yuejin block of the Tahe oilfield into three types, namely karst-cave, dissolved-vug, and fractured types, and established the integrated identification criteria of the three types of reservoirs. This study characterized karst caves, dissolved vugs, and multi-scale faults through seismic wave impedance inversion and frequency-domain detection of multi-scale faults. 3D geological models of different types of reservoirs were built using the combined deterministic and stochastic methods and characterized the spatial distribution of multi-scale faults, karst caves, dissolved vugs, and physical property parameters of reservoir. This study established the method for the geological modeling of fault-karst reservoirs, achieved the quantitative characterization and revealed the heterogeneity of fault-karst reservoirs. The karst-cave and dissolved-vug types are high in porosity and act as reservoirs, while the fractured type is high in permeability and act as flow pathway. This study lays the foundation for the development index prediction, well emplacement, and efficient development of the fault-karst carbonate reservoirs.展开更多
The Upper Ordovician-Lower Silurian Longmaxi Shale in the Upper Yangtze block represents one of the most important shale gas plays in China. The shale composition,porosity,organic thermal maturity,and methane sorption...The Upper Ordovician-Lower Silurian Longmaxi Shale in the Upper Yangtze block represents one of the most important shale gas plays in China. The shale composition,porosity,organic thermal maturity,and methane sorption were investigated at the Qilongcun section in the Dingshan area,southeastern Sichuan Basin. The results show that the Upper Ordovician-Lower Silurian Longmaxi Shale contains:(1) sapropelic I organic matter;(2) a 40-m thick bedded sequence where total organic carbon(TOC) content is > 2%;(3) a 30-m thick layer at the base of the Longmaxi Shale with a brittle mineral content higher than 50%; and(4) a mean methane adsorption capacity of 1.80 cm^3/g(7 MPa pressure). A positive correlation between TOC and sorbed gas indicates that organic matter content exerts an important control on methane storage capacity. Based on the analysis of the shale reservoir characteristics,the lower member of the Longmaxi Shale can thus be considered a favorable stratum for shale gas exploration and exploitation. It has similar reservoir characteristics with the Longmaxi Shale in the Jiaoshiba area tested with a high-yield industrial gas flow. However,based on tectonic analysis,differences in the level of industrial gas flow between the low-yield study area and the high-yield Jiaoshiba area may result from different tectonic preservation conditions. Evidence from these studies indicates the shale gas potential of the Longmaxi Shale is constrained by the reservoir and preservation conditions.展开更多
It is very difficult to evaluate the productivity of horizontal wells in fault block reservoirs due to the influence of fault sealing.On the basis of the method of images and source-sink theory,a semianalytical model ...It is very difficult to evaluate the productivity of horizontal wells in fault block reservoirs due to the influence of fault sealing.On the basis of the method of images and source-sink theory,a semianalytical model coupling reservoir and finite conductivity horizontal wellbore flow dynamics was built,in which the influence of fault sealing was taken into account.The distribution of wellbore flow and radial inflow profiles along the horizontal interval were also obtained.The impact of the distance between the horizontal well and the fault on the well productivity was quantitatively analyzed.Based on this analysis,the optimal distance between the horizontal well and the fault in banded fault block reservoirs could be determined.According to the field application,the relative error calculated by the model proposed in this paper is within ±15%.It is an effective evaluation method for the productivity of horizontal wells in fault block reservoirs.The productivity of the horizontal well increases logarithmically as the distance between the horizontal well and the fault increases.The optimal distance between the horizontal well and the fault is 0.25-0.3 times the horizontal well length.展开更多
In the field of 3 D geologic modeling, researchers often pay more attention to modeling methods and workflows, but neglect the quantitative evaluation of models. If the evaluation is narrowed to the same reservoir typ...In the field of 3 D geologic modeling, researchers often pay more attention to modeling methods and workflows, but neglect the quantitative evaluation of models. If the evaluation is narrowed to the same reservoir type, the comparability and practicality of quantitative assessment will be emerging. The evaluation system should include three parts: data verification, geological understanding and process check. Data verification mainly involves testing the accuracy of local prediction with actual data, and geological understanding is to examine whether the global estimation honors geological principles and prior insights. Process check is also indispensable to avoid occasionality. To this end, we produced a set of assessment criteria, taking complex fault-block sandstone oil reservoir as an example. To be specific, thirteen characteristic parameters were totally selected, setting weights according to their rated importance, formulating three-level evaluation standards in a centesimal system for each characteristic parameter, and obtaining the final assessment based on the cumulative score. The results indicate that such evaluation can not only access the quality of the model objectively and comprehensively, but also identify the aspects in need of improvement through the deduction items.展开更多
Three-dimensional geological modeling of reservoirs is an essential tool to predict reservoir performance and improve the understanding of reservoir uniqueness in Es1 formation. The paper focuses on the use of petrel ...Three-dimensional geological modeling of reservoirs is an essential tool to predict reservoir performance and improve the understanding of reservoir uniqueness in Es1 formation. The paper focuses on the use of petrel software to build three-dimensional reservoir geological model which characterizes and assesses block Nv32 that located in the west of the Shenvsi oilfield in the south of Cangzhou city, Hebei province of China, and has an oil-bearing area of 1.4 km<sup>2</sup>. This study is depending on integration data from well logs of 22 wells which provided from geology, geophysics, and petrophysics to identify and provide precise depict of the subsurface internal structure and the reservoir heterogeneity. Input data was used to build the structural model, sedimentary facies model, petrophysical properties (porosity, permeability, saturation, and N/G model, and finally to determine the reservoir volume. The lithological facies were simulated using the assigned value method. Moreover, Petrophysical properties (Porosity, permeability, oil saturation and net to gross) were constructed for each zone using the Sequential Gaussian Simulation method to guide the distribution of petrophysical properties of Es1 formation, block Nv32. Statistical analysis of the porosity, permeability, oil saturation and N/G model present that the porosity occurrence distribution is mainly concern between 0.2% - 36.39% of block Nv32 with an average porosity value of 17.5%, permeability between 0.017 mD to 974.8 mD, having an average permeability of 59.44 mD, oil saturation between 0.00 to 0.95 having an average value of 0.22, and N/G is mainly concentrated between 0.01 to 1.00 within an average value of 0.61. This research has indicated the reliability of the three-dimensional model technique as a suitable tool to provide a sufficient understanding of petrophysical distribution. The south-western and north-western indicate that oilfield is very promising an exploratory well should be drilled to find out the thickness and size of the reservoir.展开更多
This paper proposed a method of injection-production system adjustment to solve the problem that the water flooding effect was restricted because of the horizontal and vertical contradictions during the development pr...This paper proposed a method of injection-production system adjustment to solve the problem that the water flooding effect was restricted because of the horizontal and vertical contradictions during the development process of fault block reservoirs. Considering the heterogeneity of reservoir, the Buckley-Leverett water flooding theory was applied to establish the relationship between the recovery and cumulative water injection. In order to achieve the goal of vertically balanced recovery of each section, the calculation method of vertical sectional injection allocation was proposed. The planar triangular seepage unit was assumed and sweep coefficients of different oil-water distribution patterns were characterized using multi-flow tube method. In order to balance and maximize the plane sweep coefficient, the calculation method of plane production system optimization was obtained. Then the injection-production system stereoscopic adjustment method based on equilibrium displacement was proposed with vertical sectional injection allocation and plane production system optimization. This method was applied to injection and production adjustment of BZ oilfield in southern Bohai. The effect of water control and oil increase was obvious. This method can greatly improve the effect of water flooding of offshore fault block reservoirs with the adjustment of injection-production system.展开更多
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (XDA14010204).
文摘The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, large burial depth, and strong heterogeneity under the control of faulting and karstification. Based on geological, logging, and seismic data, this study classified the Ordovician fault-karst reservoirs in the Yuejin block of the Tahe oilfield into three types, namely karst-cave, dissolved-vug, and fractured types, and established the integrated identification criteria of the three types of reservoirs. This study characterized karst caves, dissolved vugs, and multi-scale faults through seismic wave impedance inversion and frequency-domain detection of multi-scale faults. 3D geological models of different types of reservoirs were built using the combined deterministic and stochastic methods and characterized the spatial distribution of multi-scale faults, karst caves, dissolved vugs, and physical property parameters of reservoir. This study established the method for the geological modeling of fault-karst reservoirs, achieved the quantitative characterization and revealed the heterogeneity of fault-karst reservoirs. The karst-cave and dissolved-vug types are high in porosity and act as reservoirs, while the fractured type is high in permeability and act as flow pathway. This study lays the foundation for the development index prediction, well emplacement, and efficient development of the fault-karst carbonate reservoirs.
基金supported by Science and Technology Support Program of Sichuan Province(No.15ZC1390)National Natural Science Foundation of China(No.41102064)
文摘The Upper Ordovician-Lower Silurian Longmaxi Shale in the Upper Yangtze block represents one of the most important shale gas plays in China. The shale composition,porosity,organic thermal maturity,and methane sorption were investigated at the Qilongcun section in the Dingshan area,southeastern Sichuan Basin. The results show that the Upper Ordovician-Lower Silurian Longmaxi Shale contains:(1) sapropelic I organic matter;(2) a 40-m thick bedded sequence where total organic carbon(TOC) content is > 2%;(3) a 30-m thick layer at the base of the Longmaxi Shale with a brittle mineral content higher than 50%; and(4) a mean methane adsorption capacity of 1.80 cm^3/g(7 MPa pressure). A positive correlation between TOC and sorbed gas indicates that organic matter content exerts an important control on methane storage capacity. Based on the analysis of the shale reservoir characteristics,the lower member of the Longmaxi Shale can thus be considered a favorable stratum for shale gas exploration and exploitation. It has similar reservoir characteristics with the Longmaxi Shale in the Jiaoshiba area tested with a high-yield industrial gas flow. However,based on tectonic analysis,differences in the level of industrial gas flow between the low-yield study area and the high-yield Jiaoshiba area may result from different tectonic preservation conditions. Evidence from these studies indicates the shale gas potential of the Longmaxi Shale is constrained by the reservoir and preservation conditions.
基金support from the National Science & Technology Major Project of China (No. 2009ZX05009-006)the China National Offshore Oil Corporation (CNOOC)
文摘It is very difficult to evaluate the productivity of horizontal wells in fault block reservoirs due to the influence of fault sealing.On the basis of the method of images and source-sink theory,a semianalytical model coupling reservoir and finite conductivity horizontal wellbore flow dynamics was built,in which the influence of fault sealing was taken into account.The distribution of wellbore flow and radial inflow profiles along the horizontal interval were also obtained.The impact of the distance between the horizontal well and the fault on the well productivity was quantitatively analyzed.Based on this analysis,the optimal distance between the horizontal well and the fault in banded fault block reservoirs could be determined.According to the field application,the relative error calculated by the model proposed in this paper is within ±15%.It is an effective evaluation method for the productivity of horizontal wells in fault block reservoirs.The productivity of the horizontal well increases logarithmically as the distance between the horizontal well and the fault increases.The optimal distance between the horizontal well and the fault is 0.25-0.3 times the horizontal well length.
基金Supported by the Sinopec Science and Technology Major Project(G5800-17-ZS-KJB009)
文摘In the field of 3 D geologic modeling, researchers often pay more attention to modeling methods and workflows, but neglect the quantitative evaluation of models. If the evaluation is narrowed to the same reservoir type, the comparability and practicality of quantitative assessment will be emerging. The evaluation system should include three parts: data verification, geological understanding and process check. Data verification mainly involves testing the accuracy of local prediction with actual data, and geological understanding is to examine whether the global estimation honors geological principles and prior insights. Process check is also indispensable to avoid occasionality. To this end, we produced a set of assessment criteria, taking complex fault-block sandstone oil reservoir as an example. To be specific, thirteen characteristic parameters were totally selected, setting weights according to their rated importance, formulating three-level evaluation standards in a centesimal system for each characteristic parameter, and obtaining the final assessment based on the cumulative score. The results indicate that such evaluation can not only access the quality of the model objectively and comprehensively, but also identify the aspects in need of improvement through the deduction items.
文摘Three-dimensional geological modeling of reservoirs is an essential tool to predict reservoir performance and improve the understanding of reservoir uniqueness in Es1 formation. The paper focuses on the use of petrel software to build three-dimensional reservoir geological model which characterizes and assesses block Nv32 that located in the west of the Shenvsi oilfield in the south of Cangzhou city, Hebei province of China, and has an oil-bearing area of 1.4 km<sup>2</sup>. This study is depending on integration data from well logs of 22 wells which provided from geology, geophysics, and petrophysics to identify and provide precise depict of the subsurface internal structure and the reservoir heterogeneity. Input data was used to build the structural model, sedimentary facies model, petrophysical properties (porosity, permeability, saturation, and N/G model, and finally to determine the reservoir volume. The lithological facies were simulated using the assigned value method. Moreover, Petrophysical properties (Porosity, permeability, oil saturation and net to gross) were constructed for each zone using the Sequential Gaussian Simulation method to guide the distribution of petrophysical properties of Es1 formation, block Nv32. Statistical analysis of the porosity, permeability, oil saturation and N/G model present that the porosity occurrence distribution is mainly concern between 0.2% - 36.39% of block Nv32 with an average porosity value of 17.5%, permeability between 0.017 mD to 974.8 mD, having an average permeability of 59.44 mD, oil saturation between 0.00 to 0.95 having an average value of 0.22, and N/G is mainly concentrated between 0.01 to 1.00 within an average value of 0.61. This research has indicated the reliability of the three-dimensional model technique as a suitable tool to provide a sufficient understanding of petrophysical distribution. The south-western and north-western indicate that oilfield is very promising an exploratory well should be drilled to find out the thickness and size of the reservoir.
文摘This paper proposed a method of injection-production system adjustment to solve the problem that the water flooding effect was restricted because of the horizontal and vertical contradictions during the development process of fault block reservoirs. Considering the heterogeneity of reservoir, the Buckley-Leverett water flooding theory was applied to establish the relationship between the recovery and cumulative water injection. In order to achieve the goal of vertically balanced recovery of each section, the calculation method of vertical sectional injection allocation was proposed. The planar triangular seepage unit was assumed and sweep coefficients of different oil-water distribution patterns were characterized using multi-flow tube method. In order to balance and maximize the plane sweep coefficient, the calculation method of plane production system optimization was obtained. Then the injection-production system stereoscopic adjustment method based on equilibrium displacement was proposed with vertical sectional injection allocation and plane production system optimization. This method was applied to injection and production adjustment of BZ oilfield in southern Bohai. The effect of water control and oil increase was obvious. This method can greatly improve the effect of water flooding of offshore fault block reservoirs with the adjustment of injection-production system.
基金This work is supported in partial by Major State Basic Research Project （No. G19990328, Parallel Computations of the Large-Scale Reservoir Simulation （2003-2004） （Cooperated with China National 0ffshore 0il Corporation）, and National Natural Science Foundation Project （No. 60303020, 2004.1-2006.12）.
