Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In thi...Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.展开更多
To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resul...To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resulting in an extremely low detection limit and improving the measurement accuracy.However,the complex and expensive hardware required does not facilitate the application or promotion of this method.Thus,a method is proposed in this study to discriminate the digital waveform of pulse signals output using an HPGe detector,whereby Compton scattering background is suppressed and a low minimum detectable activity(MDA)is achieved without using an expensive and complex anticoincidence detector and device.The electric-field-strength and energy-deposition distributions of the detector are simulated to determine the relationship between pulse shape and energy-deposition location,as well as the characteristics of energy-deposition distributions for fulland partial-energy deposition events.This relationship is used to develop a pulse-shape-discrimination algorithm based on an artificial neural network for pulse-feature identification.To accurately determine the relationship between the deposited energy of gamma(γ)rays in the detector and the deposition location,we extract four shape parameters from the pulse signals output by the detector.Machine learning is used to input the four shape parameters into the detector.Subsequently,the pulse signals are identified and classified to discriminate between partial-and full-energy deposition events.Some partial-energy deposition events are removed to suppress Compton scattering.The proposed method effectively decreases the MDA of an HPGeγ-energy dispersive spectrometer.Test results show that the Compton suppression factors for energy spectra obtained from measurements on ^(152)Eu,^(137)Cs,and ^(60)Co radioactive sources are 1.13(344 keV),1.11(662 keV),and 1.08(1332 keV),respectively,and that the corresponding MDAs are 1.4%,5.3%,and 21.6%lower,respectively.展开更多
In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten s...In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten salt at 1083–1173 K by applying an average current of 1.42–1.46 A for 9.50–21.0 h,the current efficiency of 66.4–88.6%was obtained.The produced Mg alloys consisted of MgCu_(2)and Cu(Mg)or MgCu_(2)and CuMg_(2)phases,depending on the Mg concentration in the Mg alloy.When the electrolysis of calcined dolomite was conducted in MgF_(2)–LiF–CaF_(2)molten salt at 1083 K,the current efficiency was 40.9–71.4%,owing to undesired reactions such as electroreduction of Ca^(2+)or/and CO_(3)^(2−)ions.Meanwhile,the current efficiency increased from 40.9%to 63.2%by utilizing a Pt anode,because the occurrence of CO_(3)^(2−)ions in the molten salt was prevented.After vacuum distillation of the obtained Mg alloys at 1300 K for 10 h,Mg metal with a purity of 99.9996–99.9998%was produced.Therefore,the feasibility of this novel process for the production of high-purity Mg metal from dolomite was demonstrated.展开更多
It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the alu...It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the aluminum impurities in the titanium sponge are inherited from the magnesium used to reduce titanium tetrachloride. However, it remains elusive for decades why magnesium produced through the silicothermic reduction method contains a high content of aluminum impurities with large fluctuations. By recourse to thermodynamic calculations and comparative experiments, we demonstrate that fluorite, a material used as a catalyst in the silicothermic reduction method to produce magnesium, is the chief culprit for the pest aluminum and propose a mechanism to rationalize the observed phenomena. Our findings indicate that one practical way to produce qualified magnesium for the production of high-purity titanium is to abandon fluorite during the production of magnesium with the silicothermic reduction method.展开更多
A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted u...A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted using a Cu cathode in MgF2– LiF – KCl molten salt at 1043 K by applying an average current of 1.44 A for 12.5 h. The electrolysis of calcined North Korean magnesite and seawater Mg O clinker yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 89.6–92.4%. The electrolysis of oxidized Mg O-C refractory brick, aged ferronickel slag, and ferronickel slag yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 59.3–92.3%. The vacuum distillation of Mg alloys obtained was conducted at 1300 K for 10 h to produce high-purity Mg metal. After vacuum distillation, Mg metal with a purity of above 99.994% was obtained. Therefore, this study demonstrates the feasibility of the production of high-purity Mg metal from various Mg O resources using a novel electrolytic process with a Cu cathode, followed by vacuum distillation.展开更多
Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,an...Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,and the major minerals are quartz(39.8%),K-feldspar(18.8%),albite(36.3%),muscovite(3.4%),and garnet(1.1%).Monazite U–Pb isotopic dating indicates that the No.5 pegmatite from the Eastern Qinling was emplaced at ca.420.2±2.2 Ma,which confirms that highpurity quartz mineralization probably formed during the Early Devonian.In-situ laser ablation inductively coupled plasma mass spectrometry analysis of quartz show that quartz samples from Eastern Qinling have total trace element concentrations(Al,Ti,Sc,Li,B,Cr,Mn,and Fe)ranging from 23.2 to 52.8 ppm,slightly higher than the quartz(impurity element content from 13.4 to 25.9 ppm)of the Spruce Pine high-purity quartz deposit in western North Carolina.The No.5 pegmatite of Eastern Qinling could be defined as one high-purity quartz deposit of China.展开更多
A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced ti...A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced time of 5 h,and CaO content of 2.5wt%,a DRI with a metallization rate of 96.5%was obtained through coal-based direct reduction of ultra-high-grade iron concentrate.Then,an HPI with a Fe purity of 99.95%and C,Si,Mn,and P contents as low as 0.0008wt%,0.0006wt%,0.0014wt%,and 0.0015wt%,respectively,was prepared by smelting separation of the DRI using a smelting temperature of 1625°C,smelting time of 45 min,and CaO content of 9.3wt%.The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard.An HPI with a Fe purity of 99.98wt%can be produced through the direct reduction?smelting separation of ultra-high-grade iron concentrate at relatively low cost.The proposed process shows a promising prospect for application in the future.展开更多
This article gives a brief introduction to manufacturers and markets of sputtering targets as well as the manufacturing technology thereof. Then, it analyzes the application of high-purity gold sputtering targets in t...This article gives a brief introduction to manufacturers and markets of sputtering targets as well as the manufacturing technology thereof. Then, it analyzes the application of high-purity gold sputtering targets in the fields of integrated circuit, information storage, flat panel display, etc. Based on the above, the article analyzes the processing development trend for the high-purity gold sputtering targets in aspects of ultra-high purity, manufacturing technology, analysis and testing technologies.展开更多
An improved method has been developed for enriching and determining trace In,Pt,Sn,Co,Hg,Pb,Ni,Bi,Pd,Cu and Ag in high-purity gallium.Sample was treated by PDM（partial dissolution of matrix）withHCl（11mol/L）-HNO<...An improved method has been developed for enriching and determining trace In,Pt,Sn,Co,Hg,Pb,Ni,Bi,Pd,Cu and Ag in high-purity gallium.Sample was treated by PDM（partial dissolution of matrix）withHCl（11mol/L）-HNO<sub>3</sub>（0.5mol/L）to a small residue of which Ga was then removed by extraction with 1 mlisopropyl ether.The concentrated impurities were determined by AES procedure.The recoveries for the ele-ments at the range of 0.02～0.2 μg are 95～103％;the relative standard deviations for determined impuritiesovera rangeofn.10<sup>-7</sup>～n·10<sup>-8</sup>％ are 4.3～12％;the detection limit of most elements can reach n·10<sup>-7</sup>～n·10<sup>-8</sup>％ level with the exception of Hg and Pt.This method has been successfully used to analyze many sam-ples sent by factories and institutes.展开更多
Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctiona...Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctional catalyst derived from hydrotalcite-like materials,we demonstrate the feasibility of producing high-purity H_(2)(~96%)with 0.9 mol H_(2) mol^(-1) C yield via the sorption enhanced steam reforming(SESR)of BL.The SESRBL performance in terms of H_(2) production maintained stable for 5 cycles,but declined from the 6th cycle.XRD,Raman spectroscopy,elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst.It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL,while deposition of Na and K from the BL might also be responsible for the declined performance.On the other hand,it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO_(3).Our results highlight a promising alternative for BL treatment and H_(2) production,thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.展开更多
Two optical methods, namely crystal facet reflection and etching pits reflection, were used to orient and high-purity germanium crystals. The X-ray diffraction patterns of three slices that were cut from the oriented ...Two optical methods, namely crystal facet reflection and etching pits reflection, were used to orient and high-purity germanium crystals. The X-ray diffraction patterns of three slices that were cut from the oriented and crystals were measured by X-ray diffraction. The experimental errors of crystal facet reflection method and etching pits reflection method are in the range of 0.05° - 0.12°. The crystal facet reflection method and etching pits reflection method are extremely simple and cheap and their accuracies are acceptable for characterizing high purity detector-grade germanium crystals.展开更多
High-purity magnesium(HP Mg)and Mg-1Ca,as representations of Mg-matrix implants produced by purifying and alloying,are employed in biomedical applications primarily because of their bioactivity and degradability.The s...High-purity magnesium(HP Mg)and Mg-1Ca,as representations of Mg-matrix implants produced by purifying and alloying,are employed in biomedical applications primarily because of their bioactivity and degradability.The superiority of both degradation properties,the match between degradation and osteo-genesis in vivo,and biosafety are critical problems that will decide future purifying or alloying to construct Mg-based implants and promote clinical translation.The present study investigated the benefits and limitations of degradation behavior and biosafety of HP Mg and Mg-1Ca according to the electro-chemical experiment,hydrogen evolution test,immersion test,and in vivo bone implantation assay.The results indicated that due to its Mg 2 Ca phase,Mg-1Ca exhibited a considerably higher corrosion current density and hydrogen production than HP Mg in vitro.Furthermore,HP Mg and Mg-1Ca display a favorable match between their degradation and the surrounding osteogenesis,resulting in no significant variation in degradation in vivo during 26 weeks.Additionally,the implantation and degradation of HP Mg and Mg-1Ca do not result in major organ dysfunction or pathological abnormalities.This work is expected to lay the foundation for future clinical translation of Mg and Mg alloy orthopedic implants.展开更多
For the first time,the flash sintering(FS)of high-purity alumina at room temperature,which was previously considered unachievable due to its low electrical conductivity,was conducted herein.The electrical arc originat...For the first time,the flash sintering(FS)of high-purity alumina at room temperature,which was previously considered unachievable due to its low electrical conductivity,was conducted herein.The electrical arc originating from surface flashover was harnessed to induce FS at room temperature and low air pressure.The successful FS of high-purity alumina was realized at 60 kPa under the arc constraint,resulting in a notable relative density of the alumina sample of 98.7%.The electric–thermal coupling between the arc and high-purity alumina sample during the arc-induced FS process was analyzed via the finite element simulation method.The results revealed the thermal and electrical effects of the arc on the sample,which ultimately enhance the electrical conductivity of the alumina sample.The formation of a conductive channel on the sample surface,a result of increased electrical conductivity,was the pivotal factor in achieving FS in high-purity alumina at room temperature.The arc constraint technique can be applied to numerous materials,such as ionic conductors,semiconductors,and even insulators,under room-temperature and low-air-pressure conditions.展开更多
A novel purification process based on mixer-settlers for high-purity NdCl_3 was developed. Acidic solution and pure NdCl_3 solution were compared to scrub the less-extractable rare earths(REs)(La, Ce, and Pr)from load...A novel purification process based on mixer-settlers for high-purity NdCl_3 was developed. Acidic solution and pure NdCl_3 solution were compared to scrub the less-extractable rare earths(REs)(La, Ce, and Pr)from loaded organic phase. The extractant with low-degree saponification was evaluated to remove the more-extractable element(Sm). Then the RE impurities(La, Ce, Pr, and Sm) in Nd were purified by an integrated process. Furthermore, effect of smuggling behavior on the purification of NdCl_3 in mixersettlers was studied. Based on the investigation mentioned above, the pilot-scale purification process for NdCl_3 with a purity of 99.999% was developed, and the total recovery was about 99%.展开更多
Through anisotropic Ag overgrowth on the surface of Au nanobipyramids(Au NBPs), high-purity and sizecontrolled Ag nanorods(Au/Ag NRs) are obtained by a simplified purification process. The diameters of the Au/Ag NRs a...Through anisotropic Ag overgrowth on the surface of Au nanobipyramids(Au NBPs), high-purity and sizecontrolled Ag nanorods(Au/Ag NRs) are obtained by a simplified purification process. The diameters of the Au/Ag NRs are determined by the size of the as-prepared Au NBPs, and the lengths of the Au/Ag NRs are tunable using different amounts of Ag precursor in the growth solution. Surface-enhanced Raman scattering(SERS) studies using Rhodamine-6G(R6G) as a test molecule indicate that the Au/Ag NRs have excellent sensing potential. The tunable optical properties and strong electromagnetic effect of the Au/Ag NRs, along with their superior SERS signal enhancement, show that Au/Ag NRs are promising for further applications in plasmon sensing and biomolecular detection.展开更多
The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coa...The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coating was prepared on high-purity magnesium(HP Mg)rods by fluorination and hydrothermal treatment.Scanning electron microscope showed that the thickness of the bilayer coating was 3.78 lm and that the surface morphology was nanoscale.In an in vivo experiment on femoral condyle defects in rabbits,the serum magnesium ion levels of rabbits were always in the normal range after surgery,and the liver and kidney functions were not abnormal,which indicated that the CDHA/MgF_(2)bilayer coating has good biosafety.Micro-CT showed that the CDHA/MgF_(2)bilayer coating significantly reduced the degradation rate of the HP Mg rods and enhanced the promotion of bone formation.Hard tissue sections showed that the CDHA/MgF_(2)bilayer coating gave the bone tissue a tight contact interface with the HP Mg rod and improved the bone mass.Immunohistochemistry showed that the expression of vascular endothelial growth factor and BMP-2 was more obvious.These results confirm that the CDHA/MgF_(2)bilayer coating can improve the properties of HP Mg and provide a basis for the further transformation of HP Mg in the future.It also provides a new reference for the surface modification of magnesiummetal.展开更多
Magnesium(Mg)screws perform clinical potential in anterior cruciate ligament(ACL)reconstruction,and promote fibrocartilaginous entheses regeneration at the femoral entrance.We aim to prove that high-purity Magnesium(H...Magnesium(Mg)screws perform clinical potential in anterior cruciate ligament(ACL)reconstruction,and promote fibrocartilaginous entheses regeneration at the femoral entrance.We aim to prove that high-purity Magnesium(HP Mg)screws modulate macrophage polarization in fibrocartilage interface regeneration both in vitro and in vivo.HP Mg extracts performed good cytocompatibility and significantly promoted M2 macrophage polarization in the flow cytometry and ELISA assays.M2 macrophages stimulated fibrochondrocyte differentiation of cocultured hBMSCs,and HP Mg extracts had synergistic effect on the process.Then we applied HP Mg screws,with Ti screws as control,in the ACL reconstruction rabbit model.In the histological and immunofluorescence analysis,HP Mg screws inhibited M1 polarization at 2 weeks and highly promoted M2 polarization at 2 and 4 weeks at the tendon–bone interface.Furthermore,regeneration of fibrocartilaginous entheses,rather than the fibrovascular scar interface,was detected in the HP Mg group at 12 weeks.For further mechanism study via RNA-seq detection and WB assays,we found that AKT1 was highly activated in M2 polarization,and HP Mg could stimulate AKT1 expression,rather than AKT2,in the early phase of tendon–bone healing.Our study elucidated macrophage polarization during tendon–bone healing process and emphasized HP Mg on M2 polarization and fibrocartilage interface regeneration via the selective activation of AKT1 and PI3K/AKT pathway.展开更多
Hydrogen is a green clean fuel and chemical feedstock. Its separation and purification from hydrogencontaining mixtures is the key step in the production of hydrogen with high purity(>99.99%). In this work, carbon ...Hydrogen is a green clean fuel and chemical feedstock. Its separation and purification from hydrogencontaining mixtures is the key step in the production of hydrogen with high purity(>99.99%). In this work, carbon molecular sieve(CMS) membranes with ultrahigh permselectivity for hydrogen purification were fabricated by high-temperature(700–900 ℃) pyrolysis of polymeric precursor of phenolphthaleinbased cardo poly(arylene ether ketone)(PEK-C). The evolution of the microstructural texture and ultramicroporous structure and gas separation performance of the CMS membrane were characterized via TG-MS, FT-IR, XRD, TEM, CO2 sorption analysis and gas permeation measurements. CMS membranes prepared at 700 ℃ exhibited amorphous turbostratic carbon structures and high H2 permeability of 5260 Barrer with H2/CH4, H2/N2 and H2/CO selectivities of 311, 142, 75, respectively. When carbonized at900 ℃, the CMS membrane with ultrahigh H2/CH4 selectivity of 1859 was derived owing to the formation of the dense and ordered carbon structure. CMS membranes with ultrahigh permselectivity exhibit an attractive application prospect in hydrogen purification.展开更多
Internal friction and micro-creep measurements were performed with high-purity aluminiumbamboo-crystal specimens.The relaxation strength was found to decrease with the decreaseof temperature and became zero at about 0...Internal friction and micro-creep measurements were performed with high-purity aluminiumbamboo-crystal specimens.The relaxation strength was found to decrease with the decreaseof temperature and became zero at about 0.4 T_m(T_m is the melting temperature).This re-flects the occurrence of local disordering in the bamboo boundary region at this temperature.This result conforms to the picture of grain-boundary disordering constructed by atomicsimulation studies.展开更多
Crystalline TiO_2(P25) and isolated titanate species in a ZSM-5 structure(TS-1) were modified with Au and Ag, respectively, and tested in the gas-phase photocatalytic CO_2 reduction under high purity conditions. The n...Crystalline TiO_2(P25) and isolated titanate species in a ZSM-5 structure(TS-1) were modified with Au and Ag, respectively, and tested in the gas-phase photocatalytic CO_2 reduction under high purity conditions. The noble metal modification was performed by photodeposition. Light absorbance properties of the catalysts are examined with UV–Vis spectroscopy before and after the activity test. In the gas-phase photocatalytic CO_2 reduction, it was observed that the catalysts with Ag nanostructures are more active than those with Au nanostructures. It is thus found that the energetic difference between the band gap energy of the semiconductor and the position of the plasmon is influencing the photocatalytic activity.Potentially, plasmon excitation due to visible light absorption results in plasmon resonance energy, which affects the excitation of the semiconductor positively. Therefore, an overlap between band gap energy of the semiconductor and metal plasmon is needed.展开更多
基金supported by the Key Research and Development Program of Guangxi Province,China (No.AB23075174)the National Natural Science Foundation of China (No.52174386)the Science and Technology Plan Project of Sichuan Province,China (No.2022YFS0459).
文摘Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.
基金This work was supported by the National Key R&D Program of China(Nos.2022YFF0709503,2022YFB1902700,2017YFC0602101)the Key Research and Development Program of Sichuan province(No.2023YFG0347)the Key Research and Development Program of Sichuan province(No.2020ZDZX0007).
文摘To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resulting in an extremely low detection limit and improving the measurement accuracy.However,the complex and expensive hardware required does not facilitate the application or promotion of this method.Thus,a method is proposed in this study to discriminate the digital waveform of pulse signals output using an HPGe detector,whereby Compton scattering background is suppressed and a low minimum detectable activity(MDA)is achieved without using an expensive and complex anticoincidence detector and device.The electric-field-strength and energy-deposition distributions of the detector are simulated to determine the relationship between pulse shape and energy-deposition location,as well as the characteristics of energy-deposition distributions for fulland partial-energy deposition events.This relationship is used to develop a pulse-shape-discrimination algorithm based on an artificial neural network for pulse-feature identification.To accurately determine the relationship between the deposited energy of gamma(γ)rays in the detector and the deposition location,we extract four shape parameters from the pulse signals output by the detector.Machine learning is used to input the four shape parameters into the detector.Subsequently,the pulse signals are identified and classified to discriminate between partial-and full-energy deposition events.Some partial-energy deposition events are removed to suppress Compton scattering.The proposed method effectively decreases the MDA of an HPGeγ-energy dispersive spectrometer.Test results show that the Compton suppression factors for energy spectra obtained from measurements on ^(152)Eu,^(137)Cs,and ^(60)Co radioactive sources are 1.13(344 keV),1.11(662 keV),and 1.08(1332 keV),respectively,and that the corresponding MDAs are 1.4%,5.3%,and 21.6%lower,respectively.
基金supported by the National Research Councile of Science and Technology funded by the Korean Ministry of Industry in Korea(Project Nos.:1711173260,22-3803)the Korea Evaluation Institute of Industrial Technology funded by the Korean Ministry of Industry in Korea(Project Nos.:1415179713,20011157).
文摘In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten salt at 1083–1173 K by applying an average current of 1.42–1.46 A for 9.50–21.0 h,the current efficiency of 66.4–88.6%was obtained.The produced Mg alloys consisted of MgCu_(2)and Cu(Mg)or MgCu_(2)and CuMg_(2)phases,depending on the Mg concentration in the Mg alloy.When the electrolysis of calcined dolomite was conducted in MgF_(2)–LiF–CaF_(2)molten salt at 1083 K,the current efficiency was 40.9–71.4%,owing to undesired reactions such as electroreduction of Ca^(2+)or/and CO_(3)^(2−)ions.Meanwhile,the current efficiency increased from 40.9%to 63.2%by utilizing a Pt anode,because the occurrence of CO_(3)^(2−)ions in the molten salt was prevented.After vacuum distillation of the obtained Mg alloys at 1300 K for 10 h,Mg metal with a purity of 99.9996–99.9998%was produced.Therefore,the feasibility of this novel process for the production of high-purity Mg metal from dolomite was demonstrated.
基金the support from the National Natural Science Foundation of China (No.52031011)funding from the Science and Technology Departments of Shaanxi and Xi’an,China (Nos.2021GXLH-Z-015,2016KTZDGY-04-04 and 201805064ZD15CG48)。
文摘It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the aluminum impurities in the titanium sponge are inherited from the magnesium used to reduce titanium tetrachloride. However, it remains elusive for decades why magnesium produced through the silicothermic reduction method contains a high content of aluminum impurities with large fluctuations. By recourse to thermodynamic calculations and comparative experiments, we demonstrate that fluorite, a material used as a catalyst in the silicothermic reduction method to produce magnesium, is the chief culprit for the pest aluminum and propose a mechanism to rationalize the observed phenomena. Our findings indicate that one practical way to produce qualified magnesium for the production of high-purity titanium is to abandon fluorite during the production of magnesium with the silicothermic reduction method.
基金supported by the Korea Evaluation Institute of Industrial Technology funded by the Korean Ministry of Industry in Korea (Project No.:20000970, 20–9805)Basic Research Project (22–3803) of the Korea Institute of Geoscience and Mineral Resources (KIGAM) funded by the Ministry of Science and ICT of Korea。
文摘A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted using a Cu cathode in MgF2– LiF – KCl molten salt at 1043 K by applying an average current of 1.44 A for 12.5 h. The electrolysis of calcined North Korean magnesite and seawater Mg O clinker yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 89.6–92.4%. The electrolysis of oxidized Mg O-C refractory brick, aged ferronickel slag, and ferronickel slag yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 59.3–92.3%. The vacuum distillation of Mg alloys obtained was conducted at 1300 K for 10 h to produce high-purity Mg metal. After vacuum distillation, Mg metal with a purity of above 99.994% was obtained. Therefore, this study demonstrates the feasibility of the production of high-purity Mg metal from various Mg O resources using a novel electrolytic process with a Cu cathode, followed by vacuum distillation.
基金the National Natural Science Foundation of China(42062006 and 41962007)the National Key Research and Development Program of China(2016YFC0600207)+1 种基金the Project of China Geological Survey(DD20190186 and 12120114034501)the science and technology research project of Jiangxi Provincial Department of Education(GJJ190379)。
文摘Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,and the major minerals are quartz(39.8%),K-feldspar(18.8%),albite(36.3%),muscovite(3.4%),and garnet(1.1%).Monazite U–Pb isotopic dating indicates that the No.5 pegmatite from the Eastern Qinling was emplaced at ca.420.2±2.2 Ma,which confirms that highpurity quartz mineralization probably formed during the Early Devonian.In-situ laser ablation inductively coupled plasma mass spectrometry analysis of quartz show that quartz samples from Eastern Qinling have total trace element concentrations(Al,Ti,Sc,Li,B,Cr,Mn,and Fe)ranging from 23.2 to 52.8 ppm,slightly higher than the quartz(impurity element content from 13.4 to 25.9 ppm)of the Spruce Pine high-purity quartz deposit in western North Carolina.The No.5 pegmatite of Eastern Qinling could be defined as one high-purity quartz deposit of China.
基金the National Natural Science Foundation of China(No.51904063)the Fundamental Research Funds for the Central Universities,China(Nos.N172503016,N172502005,and N172506011)the China Postdoctoral Science Foundation(No.2018M640259).
文摘A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced time of 5 h,and CaO content of 2.5wt%,a DRI with a metallization rate of 96.5%was obtained through coal-based direct reduction of ultra-high-grade iron concentrate.Then,an HPI with a Fe purity of 99.95%and C,Si,Mn,and P contents as low as 0.0008wt%,0.0006wt%,0.0014wt%,and 0.0015wt%,respectively,was prepared by smelting separation of the DRI using a smelting temperature of 1625°C,smelting time of 45 min,and CaO content of 9.3wt%.The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard.An HPI with a Fe purity of 99.98wt%can be produced through the direct reduction?smelting separation of ultra-high-grade iron concentrate at relatively low cost.The proposed process shows a promising prospect for application in the future.
基金National key technology support program(2012BAE06B05)
文摘This article gives a brief introduction to manufacturers and markets of sputtering targets as well as the manufacturing technology thereof. Then, it analyzes the application of high-purity gold sputtering targets in the fields of integrated circuit, information storage, flat panel display, etc. Based on the above, the article analyzes the processing development trend for the high-purity gold sputtering targets in aspects of ultra-high purity, manufacturing technology, analysis and testing technologies.
文摘An improved method has been developed for enriching and determining trace In,Pt,Sn,Co,Hg,Pb,Ni,Bi,Pd,Cu and Ag in high-purity gallium.Sample was treated by PDM（partial dissolution of matrix）withHCl（11mol/L）-HNO<sub>3</sub>（0.5mol/L）to a small residue of which Ga was then removed by extraction with 1 mlisopropyl ether.The concentrated impurities were determined by AES procedure.The recoveries for the ele-ments at the range of 0.02～0.2 μg are 95～103％;the relative standard deviations for determined impuritiesovera rangeofn.10<sup>-7</sup>～n·10<sup>-8</sup>％ are 4.3～12％;the detection limit of most elements can reach n·10<sup>-7</sup>～n·10<sup>-8</sup>％ level with the exception of Hg and Pt.This method has been successfully used to analyze many sam-ples sent by factories and institutes.
基金This work was supported by the Guangdong Natural Science Foundation(2017A030312005)Science and Technology Program of Guangzhou City(201707010058).
文摘Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctional catalyst derived from hydrotalcite-like materials,we demonstrate the feasibility of producing high-purity H_(2)(~96%)with 0.9 mol H_(2) mol^(-1) C yield via the sorption enhanced steam reforming(SESR)of BL.The SESRBL performance in terms of H_(2) production maintained stable for 5 cycles,but declined from the 6th cycle.XRD,Raman spectroscopy,elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst.It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL,while deposition of Na and K from the BL might also be responsible for the declined performance.On the other hand,it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO_(3).Our results highlight a promising alternative for BL treatment and H_(2) production,thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.
文摘Two optical methods, namely crystal facet reflection and etching pits reflection, were used to orient and high-purity germanium crystals. The X-ray diffraction patterns of three slices that were cut from the oriented and crystals were measured by X-ray diffraction. The experimental errors of crystal facet reflection method and etching pits reflection method are in the range of 0.05° - 0.12°. The crystal facet reflection method and etching pits reflection method are extremely simple and cheap and their accuracies are acceptable for characterizing high purity detector-grade germanium crystals.
基金the Science and Technology Commission of Shanghai Municipality(18DZ2201500,19DZ2203900)Innovative Research Team of High-level Local Universities in Shanghai(SHSMU-ZLCX20212400)Research Disci-pline Fund(KQXJXK2021)from Ninth People’s Hospital,Shanghai Jiao Tong University School of Medicine,and College of Stomatology,Shanghai Jiao Tong University.
文摘High-purity magnesium(HP Mg)and Mg-1Ca,as representations of Mg-matrix implants produced by purifying and alloying,are employed in biomedical applications primarily because of their bioactivity and degradability.The superiority of both degradation properties,the match between degradation and osteo-genesis in vivo,and biosafety are critical problems that will decide future purifying or alloying to construct Mg-based implants and promote clinical translation.The present study investigated the benefits and limitations of degradation behavior and biosafety of HP Mg and Mg-1Ca according to the electro-chemical experiment,hydrogen evolution test,immersion test,and in vivo bone implantation assay.The results indicated that due to its Mg 2 Ca phase,Mg-1Ca exhibited a considerably higher corrosion current density and hydrogen production than HP Mg in vitro.Furthermore,HP Mg and Mg-1Ca display a favorable match between their degradation and the surrounding osteogenesis,resulting in no significant variation in degradation in vivo during 26 weeks.Additionally,the implantation and degradation of HP Mg and Mg-1Ca do not result in major organ dysfunction or pathological abnormalities.This work is expected to lay the foundation for future clinical translation of Mg and Mg alloy orthopedic implants.
基金This work was supported by the National Natural Science Foundation of China(52077118)Guangdong Basic and Applied Basic Research Foundation(2021A1515011778)Key Laboratory of Engineering Dielectrics and Its Application(Harbin University of Science and Technology),Ministry of Education(KFM202204).
文摘For the first time,the flash sintering(FS)of high-purity alumina at room temperature,which was previously considered unachievable due to its low electrical conductivity,was conducted herein.The electrical arc originating from surface flashover was harnessed to induce FS at room temperature and low air pressure.The successful FS of high-purity alumina was realized at 60 kPa under the arc constraint,resulting in a notable relative density of the alumina sample of 98.7%.The electric–thermal coupling between the arc and high-purity alumina sample during the arc-induced FS process was analyzed via the finite element simulation method.The results revealed the thermal and electrical effects of the arc on the sample,which ultimately enhance the electrical conductivity of the alumina sample.The formation of a conductive channel on the sample surface,a result of increased electrical conductivity,was the pivotal factor in achieving FS in high-purity alumina at room temperature.The arc constraint technique can be applied to numerous materials,such as ionic conductors,semiconductors,and even insulators,under room-temperature and low-air-pressure conditions.
基金Project supported by'Hundreds Talents Program' from Chinese Academy of Sciences,Science and Technology Major Project of Fujian Province(2015HZ0001-3)National Natural Science Foundation of China(21571179)Science and Technology Major Project of Ganzhou(2017-8)
文摘A novel purification process based on mixer-settlers for high-purity NdCl_3 was developed. Acidic solution and pure NdCl_3 solution were compared to scrub the less-extractable rare earths(REs)(La, Ce, and Pr)from loaded organic phase. The extractant with low-degree saponification was evaluated to remove the more-extractable element(Sm). Then the RE impurities(La, Ce, Pr, and Sm) in Nd were purified by an integrated process. Furthermore, effect of smuggling behavior on the purification of NdCl_3 in mixersettlers was studied. Based on the investigation mentioned above, the pilot-scale purification process for NdCl_3 with a purity of 99.999% was developed, and the total recovery was about 99%.
基金National Natural Science Foundation of China(NSFC)(11274173,11374159)Jiangsu Innovation Program for Graduate Education(KYZZ_0091)+1 种基金Scientific Foundation of Nanjing Institute of Technology(CKJB201411,QKJB201409,YKJ201538)Qing Lan Project and Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Through anisotropic Ag overgrowth on the surface of Au nanobipyramids(Au NBPs), high-purity and sizecontrolled Ag nanorods(Au/Ag NRs) are obtained by a simplified purification process. The diameters of the Au/Ag NRs are determined by the size of the as-prepared Au NBPs, and the lengths of the Au/Ag NRs are tunable using different amounts of Ag precursor in the growth solution. Surface-enhanced Raman scattering(SERS) studies using Rhodamine-6G(R6G) as a test molecule indicate that the Au/Ag NRs have excellent sensing potential. The tunable optical properties and strong electromagnetic effect of the Au/Ag NRs, along with their superior SERS signal enhancement, show that Au/Ag NRs are promising for further applications in plasmon sensing and biomolecular detection.
基金supported by Dalian Health Commission,medical key specialty of Dengfeng project[grant number(2021)243]National Orthopedics and Sports Rehabilitation Clinical Research Center Innovation Fund(2021-NCRC-CXJJ-ZH-28).
文摘The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coating was prepared on high-purity magnesium(HP Mg)rods by fluorination and hydrothermal treatment.Scanning electron microscope showed that the thickness of the bilayer coating was 3.78 lm and that the surface morphology was nanoscale.In an in vivo experiment on femoral condyle defects in rabbits,the serum magnesium ion levels of rabbits were always in the normal range after surgery,and the liver and kidney functions were not abnormal,which indicated that the CDHA/MgF_(2)bilayer coating has good biosafety.Micro-CT showed that the CDHA/MgF_(2)bilayer coating significantly reduced the degradation rate of the HP Mg rods and enhanced the promotion of bone formation.Hard tissue sections showed that the CDHA/MgF_(2)bilayer coating gave the bone tissue a tight contact interface with the HP Mg rod and improved the bone mass.Immunohistochemistry showed that the expression of vascular endothelial growth factor and BMP-2 was more obvious.These results confirm that the CDHA/MgF_(2)bilayer coating can improve the properties of HP Mg and provide a basis for the further transformation of HP Mg in the future.It also provides a new reference for the surface modification of magnesiummetal.
基金sponsored by the National Natural Science Foundation of China(No.81702183,No.81974325)Shanghai Sailing Program(No.17YF1414100).
文摘Magnesium(Mg)screws perform clinical potential in anterior cruciate ligament(ACL)reconstruction,and promote fibrocartilaginous entheses regeneration at the femoral entrance.We aim to prove that high-purity Magnesium(HP Mg)screws modulate macrophage polarization in fibrocartilage interface regeneration both in vitro and in vivo.HP Mg extracts performed good cytocompatibility and significantly promoted M2 macrophage polarization in the flow cytometry and ELISA assays.M2 macrophages stimulated fibrochondrocyte differentiation of cocultured hBMSCs,and HP Mg extracts had synergistic effect on the process.Then we applied HP Mg screws,with Ti screws as control,in the ACL reconstruction rabbit model.In the histological and immunofluorescence analysis,HP Mg screws inhibited M1 polarization at 2 weeks and highly promoted M2 polarization at 2 and 4 weeks at the tendon–bone interface.Furthermore,regeneration of fibrocartilaginous entheses,rather than the fibrovascular scar interface,was detected in the HP Mg group at 12 weeks.For further mechanism study via RNA-seq detection and WB assays,we found that AKT1 was highly activated in M2 polarization,and HP Mg could stimulate AKT1 expression,rather than AKT2,in the early phase of tendon–bone healing.Our study elucidated macrophage polarization during tendon–bone healing process and emphasized HP Mg on M2 polarization and fibrocartilage interface regeneration via the selective activation of AKT1 and PI3K/AKT pathway.
基金the National Key R&D Program of China(2017YFB0603403)National Natural Science Foundation of China(21676044,21878033,21978034)+1 种基金High Level Innovation Team of Liaoning Province(XLYC1908033)Fundamental Research Funds for the Central Universities(DUT19ZD211,DUT 2018TB02)for the financial support。
文摘Hydrogen is a green clean fuel and chemical feedstock. Its separation and purification from hydrogencontaining mixtures is the key step in the production of hydrogen with high purity(>99.99%). In this work, carbon molecular sieve(CMS) membranes with ultrahigh permselectivity for hydrogen purification were fabricated by high-temperature(700–900 ℃) pyrolysis of polymeric precursor of phenolphthaleinbased cardo poly(arylene ether ketone)(PEK-C). The evolution of the microstructural texture and ultramicroporous structure and gas separation performance of the CMS membrane were characterized via TG-MS, FT-IR, XRD, TEM, CO2 sorption analysis and gas permeation measurements. CMS membranes prepared at 700 ℃ exhibited amorphous turbostratic carbon structures and high H2 permeability of 5260 Barrer with H2/CH4, H2/N2 and H2/CO selectivities of 311, 142, 75, respectively. When carbonized at900 ℃, the CMS membrane with ultrahigh H2/CH4 selectivity of 1859 was derived owing to the formation of the dense and ordered carbon structure. CMS membranes with ultrahigh permselectivity exhibit an attractive application prospect in hydrogen purification.
文摘Internal friction and micro-creep measurements were performed with high-purity aluminiumbamboo-crystal specimens.The relaxation strength was found to decrease with the decreaseof temperature and became zero at about 0.4 T_m(T_m is the melting temperature).This re-flects the occurrence of local disordering in the bamboo boundary region at this temperature.This result conforms to the picture of grain-boundary disordering constructed by atomicsimulation studies.
文摘Crystalline TiO_2(P25) and isolated titanate species in a ZSM-5 structure(TS-1) were modified with Au and Ag, respectively, and tested in the gas-phase photocatalytic CO_2 reduction under high purity conditions. The noble metal modification was performed by photodeposition. Light absorbance properties of the catalysts are examined with UV–Vis spectroscopy before and after the activity test. In the gas-phase photocatalytic CO_2 reduction, it was observed that the catalysts with Ag nanostructures are more active than those with Au nanostructures. It is thus found that the energetic difference between the band gap energy of the semiconductor and the position of the plasmon is influencing the photocatalytic activity.Potentially, plasmon excitation due to visible light absorption results in plasmon resonance energy, which affects the excitation of the semiconductor positively. Therefore, an overlap between band gap energy of the semiconductor and metal plasmon is needed.
