The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault lo...The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.展开更多
Machining-features of the workplace are described by using of the object-oriented （O-O） technology. Geometrical machining-features are recognized in the given cut region by using the maximum membership priciple abou...Machining-features of the workplace are described by using of the object-oriented （O-O） technology. Geometrical machining-features are recognized in the given cut region by using the maximum membership priciple about the fuzzy set. Depending on the IF-THEN rule and the fuzzy matching method, the rough information of the machining-process for high-speed milling （HSM） is extracted based on the database of machining-process for HSM. The optimization model of machining-process scheme is established to obtain shorter cut time, lower cost or higher surface quality. It is helpful to form successful cases for HSM. NC programming for HSM is realized according to optimized machining-process data from HSM cases selected by the optimization model and the extracted information of machining-process.展开更多
This study is concerned with the surface integrity of Inconel 738LC parts manufactured by selective laser melting(SLM)followed by high-speed milling(HSM).In the investigation process of surface integrity,the study emp...This study is concerned with the surface integrity of Inconel 738LC parts manufactured by selective laser melting(SLM)followed by high-speed milling(HSM).In the investigation process of surface integrity,the study employs ultradepth three-dimensional microscopy,laser scanning confocal microscopy,scanning electron microscopy,electron backscatter diffractometry,and energy dispersive spectroscopy to characterize the evolution of material microstructure,work hardening,residual stress coupling,and anisotropic effect of the building direction on surface integrity of the samples.The results show that SLM/HSM hybrid manufacturing can be an effective method to obtain better surface quality with a thinner machining metamorphic layer.High-speed machining is adopted to reduce cutting force and suppress machining heat,which is an effective way to produce better surface mechanical properties during the SLM/HSM hybrid manufacturing process.In general,high-speed milling of the SLM-built Inconel 738LC samples offers better surface integrity,compared to simplex additive manufacturing or casting.展开更多
A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating u...A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating under cutting and cooling under non-cutting. It shows that cutting speed and the tool-workpiece engagement condition are determinative for tool temperature in the operation. The suggested model was investigated by tests of AlTiN coated endmill machining hardened die steel JIS SKD61, where cutting temperature on the flank face of tool was measured with an optical fiber type radiation thermometer. Experimental results show that the tendency of cutting temperature to increase with cutting speed and engagement angle is intensified with the progressing tool wear.展开更多
High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy...High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.展开更多
A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples. In this system the tool/workpiece interface temperat...A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples. In this system the tool/workpiece interface temperature is measured by the tool/workpiece natural thermocouple, while the temperature distribution on the workpiece surface and that of interior are measured by some standard thermocouples prearranged at proper positions. The system can be used to measure cutting temperature in the machining with the rotary cutting tools, such as vertical drill and end milling cutter. It is practically used for the research on high-speed milling with hardened steel.展开更多
Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by ...Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.展开更多
The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, break...The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, breakage, and so on. The main wear mechanisms are adhesion, diffusion and fatigue. Compared with conventional speed machining, the effect and impact of thermal-dynamical coupling field play an important role in the cutting tool wear in high-speed milling of aluminum alloy.展开更多
An integrated dynamic model considering the influence of the helix angle is developed through dividing the cutting process into three cutting processes： uninterrupted, entry, and exit cutting processes. The semi-disc...An integrated dynamic model considering the influence of the helix angle is developed through dividing the cutting process into three cutting processes： uninterrupted, entry, and exit cutting processes. The semi-discretized technique is used to approximate the finite dimensional Floquet transition matrix of the dynamic control equation to determine the stability of milling process. The stability charts for helix mills are obtained. Results show that the helix angle plays an important role in the stability of milling process. The stability regions with helix angle become larger than those without helix angle. Some ＂islands＂ are presented in the stability charts, and ＂island＂ locations are determined by the relation between the axial depth of cut and the helix pitch. The ＂islands＂ are connected by the ＂bridge＂ by the effects of entry and exit cutting processes. The theoretical results are validated by milling experiments.展开更多
Considering the deficiency in milling process parameters selection, based on the modelling of dynamic milling force and the deduction of chatter stability limits, the chatter stability lobes simulation program for mil...Considering the deficiency in milling process parameters selection, based on the modelling of dynamic milling force and the deduction of chatter stability limits, the chatter stability lobes simulation program for milling is developed with MAT- LAB. The simulation optimization application software of dynamics was designed using engineering simulation software Visio Basic. The chatter stability lobes for milling, which can be used as an instruction guide for the selection of process parameters, are simulated with frequency response functions （FRFs） gained by hammer test. The validation and accuracy of the simulation algorithm are verified by experiments. The simulation method has been used in a factory with an excellent application effect.展开更多
A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine i...A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine is introduced, and the workpiece locating system and the post processing system of the cutter location （CL） data file are analyzed. The new machine has advantages of low costs, simple structure, good rigidity, and high precision. It is easy to be transformed and used to process the workpiece with a complex surface.展开更多
Using a closed field unbalanced magnetron sputtering system,the cemented carbide end mills were coated with a CrTiAlN hard coating,which consisted of a Cr adhesive layer,a CrN interlayer and a CrTiAlN top layer.The mi...Using a closed field unbalanced magnetron sputtering system,the cemented carbide end mills were coated with a CrTiAlN hard coating,which consisted of a Cr adhesive layer,a CrN interlayer and a CrTiAlN top layer.The microstructure and mechanical properties of the coating were investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,micro indentation and scratch test.The cutting performance of the coated end mills were conducted by high-speed dry milling hardened steel（P20,HRC 45）.The results indicates that the coating is composed of（Cr,Ti,Al）N columnar grains with nanolayers.The coating exhibits good adhesion to cemented carbide substrate and high microhardness of around 30 GPa.The coated end mills show significant improvement on tool life and much lower cutting force as compared to the uncoated ones.And the related mechanisms were discussed.展开更多
To enhance the efficiency and machining precision of the TX1600G complex boring and milling machining center,a study was conducted on the structure of its gantry milling system.This study aimed to mitigate the influen...To enhance the efficiency and machining precision of the TX1600G complex boring and milling machining center,a study was conducted on the structure of its gantry milling system.This study aimed to mitigate the influence of factors such as structural quality,natural frequency,and stiffness.The approach employed for this investigation involved mechanism topology optimization.To initiate this process,a finite element model of the gantry milling system structure was established.Subsequently,an objective function,comprising strain energy and modal eigenvalues,was synthesized.This objective function was optimized through multi-objective topology optimization,taking into account certain mass fraction constraints and considering various factors,including processing technology.The ultimate goal of this optimization was to create a gantry milling structure that exhibited high levels of dynamic and static stiffness,a superior natural frequency,and reduced mass.To validate the effectiveness of these topology optimization results,a comparison was made between the new and previous structures.The findings of this study serve as a valuable reference for optimizing the structure of other components within the machining center.展开更多
In metal cutting industry it is a common practice to search for optimal combination of cutting parameters in order to maximize the tool life for a fixed minimum value of material removal rate（MRR）. After the advent ...In metal cutting industry it is a common practice to search for optimal combination of cutting parameters in order to maximize the tool life for a fixed minimum value of material removal rate（MRR）. After the advent of high-speed milling（HSM） pro cess, lots of experimental and theoretical researches have been done for this purpose which mainly emphasized on the optimization of the cutting parameters. It is highly beneficial to convert raw data into a comprehensive knowledge-based expert system using fuzzy logic as the reasoning mechanism. In this paper an attempt has been presented for the extraction of the rules from fuzzy neural network（FNN） so as to have the most effective knowledge-base for given set of data. Experiments were conducted to determine the best values of cutting speeds that can maximize tool life for different combinations of input parameters. A fuzzy neural network was constructed based on the fuzzification of input parameters and the cutting speed. After training process, raw rule sets were extracted and a rule pruning approach was proposed to obtain concise linguistic rules. The estimation process with fuzzy inference showed that the optimized combination of fuzzy rules provided the estimation error of only 6.34 m/min as compared to 314 m/min of that of randomized combination of rule s.展开更多
This paper presents the fault diagnosis of face milling tool based on machine learning approach.While machining,spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are a...This paper presents the fault diagnosis of face milling tool based on machine learning approach.While machining,spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are acquired.A set of discrete wavelet features is extracted from the vibration signals using discrete wavelet transform(DWT)technique.The decision tree technique is used to select significant features out of all extracted wavelet features.C-support vector classification(C-SVC)andν-support vector classification(ν-SVC)models with different kernel functions of support vector machine(SVM)are used to study and classify the tool condition based on selected features.From the results obtained,C-SVC is the best model thanν-SVC and it can be able to give 94.5%classification accuracy for face milling of special steel alloy 42CrMo4.展开更多
The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting spee...The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting speed,feed per tooth,cutting tool geometry and cooling strategy are demonstrated.It has been found that the surface quality of machined grooves can be improved by increasing the cutting speed.However,cryogenic cooling with CO_2 exhibits no significant improvement of surface quality.Microstructure and hardness investigations revealed similar microstructure and hardness variations near the machined groove walls for both utilized tool geometries.Therefore,cryogenic cooling can decrease more far-ranging hardness reductions due to high process temperatures,especially in the UFG regions of the machined parts,whilst it cannot prevent the drop in hardness directly at the groove walls.展开更多
An approach is presented to optimize the surface roughness in high-speed finish milling of 7050- T7451 aeronautical aluminum alloy. In view of this, the multi-linear regression model for surface roughness has been dev...An approach is presented to optimize the surface roughness in high-speed finish milling of 7050- T7451 aeronautical aluminum alloy. In view of this, the multi-linear regression model for surface roughness has been developed in terms of slenderness ratio, cutting speed, radial depth-of-cut and feed per tooth by means of orthogonal experimental design. Variance analyses were applied to check the adequacy of the predictive model and the significances of the independent input parameters. Response contours of surface roughness were generated by using response surface methodology （RSM）. From these contours, it was possible to select an optimum combination of cutting parameters that improves machining efficiency without increasing the surface roughness.展开更多
In this paper,application examples of high-speed electrical machines are presented,and the machine structures are categorized.Key issues of design and control for the high-speed permanent magnet machines are reviewed,...In this paper,application examples of high-speed electrical machines are presented,and the machine structures are categorized.Key issues of design and control for the high-speed permanent magnet machines are reviewed,including bearings selection,rotor dynamics analysis and design,rotor stress analysis and protection,thermal analysis and design,electromagnetic losses analysis and reduction,sensorless control strategies,as well as comparison and selection of sine-wave and square-wave drive modes.Some challenges are also discussed,so that future studies could be focused.展开更多
The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performa...The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performance of the machine tool decline. One is the milling head spindle supported on two sets of complex bearings. The mechanical dynamic rigidity of milling head structure is researched on designed digital prototype with finite element analysis（FEA） and modal synthesis analysis （ MSA ） for identifying the weak structures. The other is the ram structure hanging on milling head. The structure is researched to get dynamic performance on cutting at different ram extending positions. The analysis results on spindle and ram are used to improve the mechanical configurations and structure in design. The machine tool is built up with modified structure and gets better dynamic rigidity than it was before.展开更多
Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have th...Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.展开更多
基金the National Key Research and Development Program of China under Grant 2021YFB3301300the National Natural Science Foundation of China under Grant 62203213+1 种基金the Natural Science Foundation of Jiangsu Province under Grant BK20220332the Open Project Program of Fujian Provincial Key Laboratory of Intelligent Identification and Control of Complex Dynamic System under Grant 2022A0004.
文摘The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.
文摘Machining-features of the workplace are described by using of the object-oriented （O-O） technology. Geometrical machining-features are recognized in the given cut region by using the maximum membership priciple about the fuzzy set. Depending on the IF-THEN rule and the fuzzy matching method, the rough information of the machining-process for high-speed milling （HSM） is extracted based on the database of machining-process for HSM. The optimization model of machining-process scheme is established to obtain shorter cut time, lower cost or higher surface quality. It is helpful to form successful cases for HSM. NC programming for HSM is realized according to optimized machining-process data from HSM cases selected by the optimization model and the extracted information of machining-process.
基金Shenzhen Municipal Science and Technology Innovation Commission Projects(Grant Nos.Y01336107,JCYJ20180504165824643,GJHZ20180411143506667,JC YJ20170817111811303 and KQTD20190929172505711)。
文摘This study is concerned with the surface integrity of Inconel 738LC parts manufactured by selective laser melting(SLM)followed by high-speed milling(HSM).In the investigation process of surface integrity,the study employs ultradepth three-dimensional microscopy,laser scanning confocal microscopy,scanning electron microscopy,electron backscatter diffractometry,and energy dispersive spectroscopy to characterize the evolution of material microstructure,work hardening,residual stress coupling,and anisotropic effect of the building direction on surface integrity of the samples.The results show that SLM/HSM hybrid manufacturing can be an effective method to obtain better surface quality with a thinner machining metamorphic layer.High-speed machining is adopted to reduce cutting force and suppress machining heat,which is an effective way to produce better surface mechanical properties during the SLM/HSM hybrid manufacturing process.In general,high-speed milling of the SLM-built Inconel 738LC samples offers better surface integrity,compared to simplex additive manufacturing or casting.
文摘A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating under cutting and cooling under non-cutting. It shows that cutting speed and the tool-workpiece engagement condition are determinative for tool temperature in the operation. The suggested model was investigated by tests of AlTiN coated endmill machining hardened die steel JIS SKD61, where cutting temperature on the flank face of tool was measured with an optical fiber type radiation thermometer. Experimental results show that the tendency of cutting temperature to increase with cutting speed and engagement angle is intensified with the progressing tool wear.
基金Projects(50975237,51005184) supported by the National Natural Science Foundation of China
文摘High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.
文摘A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples. In this system the tool/workpiece interface temperature is measured by the tool/workpiece natural thermocouple, while the temperature distribution on the workpiece surface and that of interior are measured by some standard thermocouples prearranged at proper positions. The system can be used to measure cutting temperature in the machining with the rotary cutting tools, such as vertical drill and end milling cutter. It is practically used for the research on high-speed milling with hardened steel.
基金Supported by the National Key Basic Research Program of China("973"Project)(2009CB724401)the China Postdoctoral Science Foundation(20070420208)the Postdoctoral Innovation Foundation of Shandong Province(200702023)~~
文摘Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.
文摘The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. Results show that the dominant wear patterns are coating damage, crater wear, micro-chipping, breakage, and so on. The main wear mechanisms are adhesion, diffusion and fatigue. Compared with conventional speed machining, the effect and impact of thermal-dynamical coupling field play an important role in the cutting tool wear in high-speed milling of aluminum alloy.
文摘An integrated dynamic model considering the influence of the helix angle is developed through dividing the cutting process into three cutting processes： uninterrupted, entry, and exit cutting processes. The semi-discretized technique is used to approximate the finite dimensional Floquet transition matrix of the dynamic control equation to determine the stability of milling process. The stability charts for helix mills are obtained. Results show that the helix angle plays an important role in the stability of milling process. The stability regions with helix angle become larger than those without helix angle. Some ＂islands＂ are presented in the stability charts, and ＂island＂ locations are determined by the relation between the axial depth of cut and the helix pitch. The ＂islands＂ are connected by the ＂bridge＂ by the effects of entry and exit cutting processes. The theoretical results are validated by milling experiments.
基金Tianjin Municipal Association of Higher Vocational&Technical Education Projects(No.XIV412)
文摘Considering the deficiency in milling process parameters selection, based on the modelling of dynamic milling force and the deduction of chatter stability limits, the chatter stability lobes simulation program for milling is developed with MAT- LAB. The simulation optimization application software of dynamics was designed using engineering simulation software Visio Basic. The chatter stability lobes for milling, which can be used as an instruction guide for the selection of process parameters, are simulated with frequency response functions （FRFs） gained by hammer test. The validation and accuracy of the simulation algorithm are verified by experiments. The simulation method has been used in a factory with an excellent application effect.
文摘A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine is introduced, and the workpiece locating system and the post processing system of the cutter location （CL） data file are analyzed. The new machine has advantages of low costs, simple structure, good rigidity, and high precision. It is easy to be transformed and used to process the workpiece with a complex surface.
基金Projects (500120069,U1201245) supported by the National Natural Science Foundation of ChinaProject (2011J2200036) supported by Guangzhou Scientific and Technological Planning Project,ChinaProject supported by Guangdong Province Universities and Colleges Pearl River Scholar Funded Scheme(2012),China
文摘Using a closed field unbalanced magnetron sputtering system,the cemented carbide end mills were coated with a CrTiAlN hard coating,which consisted of a Cr adhesive layer,a CrN interlayer and a CrTiAlN top layer.The microstructure and mechanical properties of the coating were investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,micro indentation and scratch test.The cutting performance of the coated end mills were conducted by high-speed dry milling hardened steel（P20,HRC 45）.The results indicates that the coating is composed of（Cr,Ti,Al）N columnar grains with nanolayers.The coating exhibits good adhesion to cemented carbide substrate and high microhardness of around 30 GPa.The coated end mills show significant improvement on tool life and much lower cutting force as compared to the uncoated ones.And the related mechanisms were discussed.
文摘To enhance the efficiency and machining precision of the TX1600G complex boring and milling machining center,a study was conducted on the structure of its gantry milling system.This study aimed to mitigate the influence of factors such as structural quality,natural frequency,and stiffness.The approach employed for this investigation involved mechanism topology optimization.To initiate this process,a finite element model of the gantry milling system structure was established.Subsequently,an objective function,comprising strain energy and modal eigenvalues,was synthesized.This objective function was optimized through multi-objective topology optimization,taking into account certain mass fraction constraints and considering various factors,including processing technology.The ultimate goal of this optimization was to create a gantry milling structure that exhibited high levels of dynamic and static stiffness,a superior natural frequency,and reduced mass.To validate the effectiveness of these topology optimization results,a comparison was made between the new and previous structures.The findings of this study serve as a valuable reference for optimizing the structure of other components within the machining center.
基金supported by International Science and Technology Cooperation project (Grant No. 2008DFA71750)
文摘In metal cutting industry it is a common practice to search for optimal combination of cutting parameters in order to maximize the tool life for a fixed minimum value of material removal rate（MRR）. After the advent of high-speed milling（HSM） pro cess, lots of experimental and theoretical researches have been done for this purpose which mainly emphasized on the optimization of the cutting parameters. It is highly beneficial to convert raw data into a comprehensive knowledge-based expert system using fuzzy logic as the reasoning mechanism. In this paper an attempt has been presented for the extraction of the rules from fuzzy neural network（FNN） so as to have the most effective knowledge-base for given set of data. Experiments were conducted to determine the best values of cutting speeds that can maximize tool life for different combinations of input parameters. A fuzzy neural network was constructed based on the fuzzification of input parameters and the cutting speed. After training process, raw rule sets were extracted and a rule pruning approach was proposed to obtain concise linguistic rules. The estimation process with fuzzy inference showed that the optimized combination of fuzzy rules provided the estimation error of only 6.34 m/min as compared to 314 m/min of that of randomized combination of rule s.
文摘This paper presents the fault diagnosis of face milling tool based on machine learning approach.While machining,spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are acquired.A set of discrete wavelet features is extracted from the vibration signals using discrete wavelet transform(DWT)technique.The decision tree technique is used to select significant features out of all extracted wavelet features.C-support vector classification(C-SVC)andν-support vector classification(ν-SVC)models with different kernel functions of support vector machine(SVM)are used to study and classify the tool condition based on selected features.From the results obtained,C-SVC is the best model thanν-SVC and it can be able to give 94.5%classification accuracy for face milling of special steel alloy 42CrMo4.
基金supported by the German Research Foundation(DFG)the DFG for funding the subproject B3 and C5 of the Collaborative Research Center 666 "Integral sheet metal design with higher order bifurcations-Development,Production,Evaluation″
文摘The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting speed,feed per tooth,cutting tool geometry and cooling strategy are demonstrated.It has been found that the surface quality of machined grooves can be improved by increasing the cutting speed.However,cryogenic cooling with CO_2 exhibits no significant improvement of surface quality.Microstructure and hardness investigations revealed similar microstructure and hardness variations near the machined groove walls for both utilized tool geometries.Therefore,cryogenic cooling can decrease more far-ranging hardness reductions due to high process temperatures,especially in the UFG regions of the machined parts,whilst it cannot prevent the drop in hardness directly at the groove walls.
基金Sponsored by the National Natural Science Foundation of China (50575126)the Foundation for the Author of National Excellent Doctoral Dis-sertation of China (200231)
文摘An approach is presented to optimize the surface roughness in high-speed finish milling of 7050- T7451 aeronautical aluminum alloy. In view of this, the multi-linear regression model for surface roughness has been developed in terms of slenderness ratio, cutting speed, radial depth-of-cut and feed per tooth by means of orthogonal experimental design. Variance analyses were applied to check the adequacy of the predictive model and the significances of the independent input parameters. Response contours of surface roughness were generated by using response surface methodology （RSM）. From these contours, it was possible to select an optimum combination of cutting parameters that improves machining efficiency without increasing the surface roughness.
基金The authors'team acknowledges the continuous and invaluable support from the Natural Science Foundation of China under the grants of 51577165,51690182,51377140,and 51077116.
文摘In this paper,application examples of high-speed electrical machines are presented,and the machine structures are categorized.Key issues of design and control for the high-speed permanent magnet machines are reviewed,including bearings selection,rotor dynamics analysis and design,rotor stress analysis and protection,thermal analysis and design,electromagnetic losses analysis and reduction,sensorless control strategies,as well as comparison and selection of sine-wave and square-wave drive modes.Some challenges are also discussed,so that future studies could be focused.
基金supported by Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality,China.
文摘The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performance of the machine tool decline. One is the milling head spindle supported on two sets of complex bearings. The mechanical dynamic rigidity of milling head structure is researched on designed digital prototype with finite element analysis（FEA） and modal synthesis analysis （ MSA ） for identifying the weak structures. The other is the ram structure hanging on milling head. The structure is researched to get dynamic performance on cutting at different ram extending positions. The analysis results on spindle and ram are used to improve the mechanical configurations and structure in design. The machine tool is built up with modified structure and gets better dynamic rigidity than it was before.
基金This work was supported by the National Natural Science Foundation of China(51677144).
文摘Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.
