Human–robot(HR)collaboration(HRC)is an emerging research field because of the complementary advantages of humans and robots.An HRC framework for robotic assembly based on impedance control is proposed in this paper.I...Human–robot(HR)collaboration(HRC)is an emerging research field because of the complementary advantages of humans and robots.An HRC framework for robotic assembly based on impedance control is proposed in this paper.In the HRC framework,the human is the decision maker,the robot acts as the executor,while the assembly environment provides constraints.The robot is the main executor to perform the assembly action,which has the position control,drag and drop,positive impedance control,and negative impedance control modes.To reveal the characteristics of the HRC framework,the switch condition map of different control modes and the stability analysis of the HR coupled system are discussed.In the end,HRC assembly experiments are conducted,where the HRC assembly task can be accomplished when the assembling tolerance is 0.08 mm or with the interference fit.Experiments show that the HRC assembly has the complementary advantages of humans and robots and is efficient in finishing complex assembly tasks.展开更多
A complete characterization of the behavior in human-robot interactions(HRI) includes both: the behavioral dynamics and the control laws that characterize how the behavior is regulated with the perception data. In thi...A complete characterization of the behavior in human-robot interactions(HRI) includes both: the behavioral dynamics and the control laws that characterize how the behavior is regulated with the perception data. In this way, this work proposes a leader-follower coordinate control based on an impedance control that allows to establish a dynamic relation between social forces and motion error. For this, a scheme is presented to identify the impedance based on fictitious social forces, which are described by distance-based potential fields.As part of the validation procedure, we present an experimental comparison to select the better of two different fictitious force structures. The criteria are determined by two qualities: least impedance errors during the validation procedure and least parameter variance during the recursive estimation procedure.Finally, with the best fictitious force and its identified impedance,an impedance control is designed for a mobile robot Pioneer 3AT,which is programmed to follow a human in a structured scenario.According to results, and under the hypothesis that moving like humans will be acceptable by humans, it is believed that the proposed control improves the social acceptance of the robot for this kind of interaction.展开更多
Robotic systems are expected to play an increasingly important role in future space activities. The robotic on-orbital service, whose key is the capturing technology, becomes a research hot spot in recent years. This ...Robotic systems are expected to play an increasingly important role in future space activities. The robotic on-orbital service, whose key is the capturing technology, becomes a research hot spot in recent years. This paper studies the dynamics modeling and impedance control of a multi-arm free-flying space robotic system capturing a non-cooperative target. Firstly, a control-oriented dynamics model is essential in control algorithm design and code realization. Unlike a numerical algorithm, an analytical approach is suggested. Using a general and a quasi-coordinate Lagrangian formulation, the kinematics and dynamics equations are derived.Then, an impedance control algorithm is developed which allows coordinated control of the multiple manipulators to capture a target.Through enforcing a reference impedance, end-effectors behave like a mass-damper-spring system fixed in inertial space in reaction to any contact force between the capture hands and the target. Meanwhile, the position and the attitude of the base are maintained stably by using gas jet thrusters to work against the manipulators' reaction. Finally, a simulation by using a space robot with two manipulators and a free-floating non-cooperative target is illustrated to verify the effectiveness of the proposed method.展开更多
The hydraulic parallel manipulator combines the high-power density of the hydraulic system and high rigidity of the parallel mechanism with excellent load-carrying capacity.However,the high-precision trajectory tracki...The hydraulic parallel manipulator combines the high-power density of the hydraulic system and high rigidity of the parallel mechanism with excellent load-carrying capacity.However,the high-precision trajectory tracking control of the hydraulic parallel manipulator is challenged by the coupling dynamics of the parallel mechanism and the high nonlinearities of the hydraulic system.In this study,the trajectory control of a 3-DOF symmetric spherical parallel 3UPS/S manipulator is evaluated.Focusing on the highly coupling and nonlinear system dynamics,a compound impedance control method for a hydraulic driven parallel manipulator is proposed,which combines impedance control with the spatial motion characteristics of a parallel manipulator.The control strategy is divided into the inner and outer loops.The inner loop controls the impedance of the actuator in the joint space,and the outer loop controls the impedance of the entire platform in the task space to compensate the coupling of the actuators and improve the tracking accuracy of the moving platform.Compound impedance control does not require force or pressure sensors and is less dependent on modeling precision.The experimental results show that the compound impedance control effectively improves the tracking accuracy of the moving platform.This research proposes a compound impedance control strategy for a 3-DOF hydraulic parallel manipulator,which has high tracking precision with a simple and cheap system configuration.展开更多
For robot interaction control,the interaction force between the robot and the manipulated object or environment should be monitored.Impedance control is a type of interaction control.Specifically,in impedance control,...For robot interaction control,the interaction force between the robot and the manipulated object or environment should be monitored.Impedance control is a type of interaction control.Specifically,in impedance control,the dynamic relationship between the interaction force and the resulting motion is controlled.In order to control the impedance of a mechanical system,typically,the interaction force has to be sensed.Due to the inherent limitations of direct force sensing at the interaction site,in the present work,the interaction force is observed using robust observers.In particular,to enhance the accuracy of impedance control,a first order sliding mode impedance controller is designed and incorporated in the present paper.Its advantage over positionbased interaction control algorithms is demonstrated through experimentation.Experimental results are given to show the effectiveness of the proposed algorithms.展开更多
In this article, an unknown system dynamics estimator-based impedance control method is proposed for the lower limb exoskeleton to stimulate the tracking flexibility with the terminal target position when suffering pa...In this article, an unknown system dynamics estimator-based impedance control method is proposed for the lower limb exoskeleton to stimulate the tracking flexibility with the terminal target position when suffering parametric inaccuracies and unexpected disturbances. To reinforce the robust performance, via constructing the filtering operation-based dynamic relation, i.e., invariant manifold, the unknown system dynamics estimators are employed to maintain the accurate perturbation identification in both the hip and knee subsystem. Besides, a funnel control technique is designed to govern the convergence process within a minor overshoot and a higher steady-state precision. Meanwhile, an interactive complaint result can be obtained with the aid of the impedance control, where the prescribed terminal trajectory can be adjusted into the interaction variable-based target position by the force–position mapping, revealing the dynamic influence between the impedance coefficient (stiffness and damping) and the adjusted position magnitude. A sufficient stability analysis verifies the ultimately uniformly bounded results of all the error signals, and even the angle errors can be regulated within the predefined funnel boundary in the whole convergence. Finally, some simulations are provided to demonstrate the validity and superiority including the enhanced interaction flexibility and robustness.展开更多
Stiffness adjustment is an important feature of human arm control.The adaptive variable impedance control can adapt to the robotic stiffness,but may result in a large overshoot.In this paper,nonlinear impedance contro...Stiffness adjustment is an important feature of human arm control.The adaptive variable impedance control can adapt to the robotic stiffness,but may result in a large overshoot.In this paper,nonlinear impedance control is proposed for collaborative robotic grinding,where nonlinear force feedback is designed to compensate for the nonlinear stiffness of the environment.Thus,the interaction system can be linearization to ensure the system stability.Moreover,a target trajectory adaptation strategy is studied to ensure the force tracking requirement.Then,switching law between trajectory tracking and force tracking is proposed when the robot performs a complex grinding task.The stability of the switch control as well as the trajectory adaptation law is proved.Experiments are conducted in a robotic grinding test rig,where the robot is used to grind a turbine blade.Experimental results show that the nonlinear impedance control can obtain stable grinding force,and have better grinding quality than the linear impedance control.展开更多
As an innovative concept,an optimal predictive impedance controlle is introduced here to control a lower limb rehabilitation robo in the presence of uncertainty.The desired impedance law is considered to propose a con...As an innovative concept,an optimal predictive impedance controlle is introduced here to control a lower limb rehabilitation robo in the presence of uncertainty.The desired impedance law is considered to propose a conventional model-based impedance controller for the LLRR.However,external disturbances,model imperfection,and parameters uncertainties reduce the performance of the controller in practice.In order to cope with these uncertainties,an optimal predictive compensator is introduced as a solution for a proposed convex optimization problem,which is performed on a forward finite-length horizon.As a result,the LLRR has the desired behavior even in an uncertain environment.The performance and efficiency of the proposed controller are verified by the simulation results.展开更多
Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.How...Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.However,it is difficult to obtain its precise dynamic model,because of the nonlinearity and uncertainty of the heavy robot.This paper presents a dynamic control framework with a decentralized structure for single wheel-leg,position tracking based on model predictive control(MPC)and adaptive impedance module from inside to outside.Through the Newton-Euler dynamic model of the Stewart mechanism,the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart.The actuating force naturally enables each strut to stretch and retract,thereby realizing six degrees-of-freedom(6-DOFs)position-tracking for Stewart wheel-leg.The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z-axis.This adjustment allows the robot to adequately control the desired support force tracking,isolating the robot body from vibration that is generated from unknown terrain.The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips.By comparing the proportional and integral(PI)and constant impedance controllers,better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder,as well as an inertial measurement unit(IMU)mounted on the robot body.The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot.展开更多
Variable Impedance control allows robots and humans to safely and efficiently interact with unknown external environments.This tutorial introduces online impedance adaptation control(OIAC)for variable compliant joint ...Variable Impedance control allows robots and humans to safely and efficiently interact with unknown external environments.This tutorial introduces online impedance adaptation control(OIAC)for variable compliant joint motions in a range of control tasks:rapid(<1 s)movement control(i.e.,whipping to hit),arm and finger impedance quantification,multifunctional exoskeleton control,and robot-inspired human arm control hypothesis.The OIAC has been introduced as a feedback control,which can be integrated into a feedforward control,e.g.,learned by data-driven methods.This integration facilitates the understanding of human and robot arm control,closing a research loop between biomechanics and robotics.It shows not only a research way from biomechanics to robotics,but also another reserved one.This tutorial aims at presenting research examples and Python codes for advancing the understanding of variable impedance adaptation in human and robot motor control.It contributes to the state-of-the-art by providing an online impedance adaptation controller for wearable robots(i.e.,exoskeletons)which can be used in robotic and biomechanical applications.展开更多
With the development of human robot interaction technologies, haptic interfaces are widely used for 3 D applications to provide the sense of touch. These interfaces have been utilized in medical simulation, virtual as...With the development of human robot interaction technologies, haptic interfaces are widely used for 3 D applications to provide the sense of touch. These interfaces have been utilized in medical simulation, virtual assembly and remote manipulation tasks. However, haptic interface design and control are still critical problems to reproduce the highly sensitive touch sense of humans. This paper presents the development and evaluation of a7-DOF(degree of freedom) haptic interface based on the modified delta mechanism. Firstly, both kinematics and dynamics of the modified mechanism are analyzed and presented. A novel gravity compensation algorithm based on the physical model is proposed and validated in simulation. A haptic controller is proposed based on the forward kinematics and the gravity compensation algorithm. To evaluate the control performance of the haptic interface, a prototype has been implemented. Three kinds of experiments: gravity compensation, static response and force tracking are performed respectively. The experimental results show that the mean error of the gravity compensation is less than 0.7 N and the maximum continuous force along the axis can be up to 6 N. This demonstrates the good performance of the proposed haptic interface.展开更多
Human-robot interaction(HRI) is fundamental for human-centered robotics, and has been attracting intensive research for more than a decade. The series elastic actuator(SEA) provides inherent compliance, safety and fur...Human-robot interaction(HRI) is fundamental for human-centered robotics, and has been attracting intensive research for more than a decade. The series elastic actuator(SEA) provides inherent compliance, safety and further benefits for HRI, but the introduced elastic element also brings control difficulties. In this paper, we address the stiffness rendering problem for a cable-driven SEA system, to achieve either low stiffness for good transparency or high stiffness bigger than the physical spring constant, and to assess the rendering accuracy with quantified metrics. By taking a velocity-sourced model of the motor, a cascaded velocity-torque-impedance control structure is established. To achieve high fidelity torque control, the 2-DOF(degree of freedom) stabilizing control method together with a compensator has been used to handle the competing requirements on tracking performance, noise and disturbance rejection,and energy optimization in the cable-driven SEA system. The conventional passivity requirement for HRI usually leads to a conservative design of the impedance controller, and the rendered stiffness cannot go higher than the physical spring constant. By adding a phase-lead compensator into the impedance controller,the stiffness rendering capability was augmented with guaranteed relaxed passivity. Extensive simulations and experiments have been performed, and the virtual stiffness has been rendered in the extended range of 0.1 to 2.0 times of the physical spring constant with guaranteed relaxed passivity for physical humanrobot interaction below 5 Hz. Quantified metrics also verified good rendering accuracy.展开更多
In this paper,we present a novel data-driven design method for the human-robot interaction(HRI)system,where a given task is achieved by cooperation between the human and the robot.The presented HRI controller design i...In this paper,we present a novel data-driven design method for the human-robot interaction(HRI)system,where a given task is achieved by cooperation between the human and the robot.The presented HRI controller design is a two-level control design approach consisting of a task-oriented performance optimization design and a plant-oriented impedance controller design.The task-oriented design minimizes the human effort and guarantees the perfect task tracking in the outer-loop,while the plant-oriented achieves the desired impedance from the human to the robot manipulator end-effector in the inner-loop.Data-driven reinforcement learning techniques are used for performance optimization in the outer-loop to assign the optimal impedance parameters.In the inner-loop,a velocity-free filter is designed to avoid the requirement of end-effector velocity measurement.On this basis,an adaptive controller is designed to achieve the desired impedance of the robot manipulator in the task space.The simulation and experiment of a robot manipulator are conducted to verify the efficacy of the presented HRI design framework.展开更多
Although traditional position-controlled industrial robots can be competent for most assembly tasks,they cannot complete complex tasks that frequently interact with the external environment.The current research on exo...Although traditional position-controlled industrial robots can be competent for most assembly tasks,they cannot complete complex tasks that frequently interact with the external environment.The current research on exoskeleton robots also has problems such as excessive inertia of exoskeleton robots,poor system integration and difficult human–computer interaction control.To solve these problems,this paper independently develops a tendon driving robotic system composed of a tendon driving robotic arm and an upper limb exoskeleton,and studies its control technology.First,the robot system is selected,configured,and constructed.Second,the kinematics of the robot is analyzed,and then the dynamics are studied,and the parameter identification experiment of single degree of freedom is completed.Finally,the research on zero-force control and impedance control of the robot has effectively improved the robot’s human–machine integration ability,ensured the flexibility and compliance in the process of human–computer interaction.The compliant control problem expands the usage scenarios and application scope of robots and contributes to the realization of complex operations of this group of robots in unstructured environments.展开更多
To ensure the safety, comfort, and effectiveness of lower limb rehabilitation exoskeleton robots in the rehabilitation training process, compliance is a prerequisite for human–machine interaction safety. First, under...To ensure the safety, comfort, and effectiveness of lower limb rehabilitation exoskeleton robots in the rehabilitation training process, compliance is a prerequisite for human–machine interaction safety. First, under the premise of considering the mechanical structure of the lower limb rehabilitation exoskeleton robot (LLRER), when conducting the dynamic transmission of the exoskeleton knee joint, the soft axis is added to ensure that the rotation motion and torque are flexibly transmitted to any position to achieve flexible force transmission. Second, to realize the active compliance control of LLRER, the sliding mode impedance closed-loop controller is developed based on the kinematics and dynamics model of LLRER, and the stability of the designed control system is verified by Lyapunov method. Then the experiment is designed to track the collected bicycle rehabilitation motion data stably, and the algorithm and dynamic model are verified to satisfy the experimental requirements. Finally, aiming at the transmission efficiency and response performance of the soft shaft in the torque transmission process of the knee joint, the soft shaft transmission performance test is carried out to test the soft shaft transmission performance and realize the compliance of the LLRER, so as to ensure that the rehabilitation training can be carried out in a safe and comfortable interactive environment. Through the design of rehabilitation exercise training, it is verified that the LLRER of flexible transmission under sliding mode impedance control has good adaptability in the actual environment, and can achieve accurate and flexible control. During the experiment, the effectiveness of monitoring rehabilitation training is brought through the respiratory belt.展开更多
A kind of new acoustic liner with adjustable impedance has been proposed. At the same time, a set of control system has been designed for this kind of liner. Many experimental results have been obtained based on this ...A kind of new acoustic liner with adjustable impedance has been proposed. At the same time, a set of control system has been designed for this kind of liner. Many experimental results have been obtained based on this control system. In fact, the present investigation shows the possibi1ity of active control of sound absorption coefficient or impedance of a liner according to external sound source condition by means of a standing wave tube. The experimental results show that the sound absorption coefficient of the liner can keep optimal under any sound source condition by controlling the cavity depth and the flow rate through the perforated plate of the liner. In addition, hoth the resistance and the reactance of the liner can also be controlled independently corresponding to any given condition. which is necessary to control unsteady How in turbomachinery.展开更多
A pneumatic actuator is a fast and economical tool that converts compressed air into mechanical motion.In this paper,an extended state observer(ESO)-based sliding mode controller(SMC)is developed to adjust the air pre...A pneumatic actuator is a fast and economical tool that converts compressed air into mechanical motion.In this paper,an extended state observer(ESO)-based sliding mode controller(SMC)is developed to adjust the air pressure of the actua-tor for accurate position control,Specifically,an impedance control module is established to produce desired air pressure based on the relationship between forces and desired positions.Then,the ESO-based SMC is implemented to adjust the air pressure to the required level despite the presence of system uncertainties and disturbances.As a result,the position of the actuator is controlled to a setpoint through the regulation of pressure.The performance of ESO-based SMC is compared with that of a classic active disturbance rciection controller(ADRC)and a SMC.Simulation results demonstrate that the:ESO-based SMC shows comparable performance to ADRC in terms of precise pressure control.In addition,it requires the least control effort ncessary to excite valves among the three controllers.The stability of ESO based SMC is theoretically justifed through Lyapunov approach.展开更多
Mapping grasps from human to anthropomorphic robotic hands is an open issue in research,because the master hand and the slave hand have dissimilar kinematics.This paper proposes a hybrid mapping method to solve this p...Mapping grasps from human to anthropomorphic robotic hands is an open issue in research,because the master hand and the slave hand have dissimilar kinematics.This paper proposes a hybrid mapping method to solve this problem.In the proposed method,fingers in the master and the slave hands are divided into vital and synergic fingers according to their contribution to the grasping task.The tip of the vital finger of the master hand is first mapped to that of the slave hand while ensuring that both are in simultaneous contact with the object to be grasped.Following postural synergy theory,joints of the other synergic fingers of the slave hand are then used to generate an anthropomorphic grasping configuration according to the shape of the object to be grasped.Following this,a human-guided impedance controller is used to reduce the pre-grasping error and realize compliant interaction with the environment.The proposed hybrid mapping method can not only generate the posture of the humanoid envelope but can also carry out impedance-adaptive matching.It was evaluated using simulations and an experiment involving an anthropomorphic robotic slave hand.展开更多
基金supported in part by the National Natural Science Foundation of China(62293514,52275020,and 91948301)。
文摘Human–robot(HR)collaboration(HRC)is an emerging research field because of the complementary advantages of humans and robots.An HRC framework for robotic assembly based on impedance control is proposed in this paper.In the HRC framework,the human is the decision maker,the robot acts as the executor,while the assembly environment provides constraints.The robot is the main executor to perform the assembly action,which has the position control,drag and drop,positive impedance control,and negative impedance control modes.To reveal the characteristics of the HRC framework,the switch condition map of different control modes and the stability analysis of the HR coupled system are discussed.In the end,HRC assembly experiments are conducted,where the HRC assembly task can be accomplished when the assembling tolerance is 0.08 mm or with the interference fit.Experiments show that the HRC assembly has the complementary advantages of humans and robots and is efficient in finishing complex assembly tasks.
文摘A complete characterization of the behavior in human-robot interactions(HRI) includes both: the behavioral dynamics and the control laws that characterize how the behavior is regulated with the perception data. In this way, this work proposes a leader-follower coordinate control based on an impedance control that allows to establish a dynamic relation between social forces and motion error. For this, a scheme is presented to identify the impedance based on fictitious social forces, which are described by distance-based potential fields.As part of the validation procedure, we present an experimental comparison to select the better of two different fictitious force structures. The criteria are determined by two qualities: least impedance errors during the validation procedure and least parameter variance during the recursive estimation procedure.Finally, with the best fictitious force and its identified impedance,an impedance control is designed for a mobile robot Pioneer 3AT,which is programmed to follow a human in a structured scenario.According to results, and under the hypothesis that moving like humans will be acceptable by humans, it is believed that the proposed control improves the social acceptance of the robot for this kind of interaction.
基金supported by the National Natural Science Foundation of China (61673009)。
文摘Robotic systems are expected to play an increasingly important role in future space activities. The robotic on-orbital service, whose key is the capturing technology, becomes a research hot spot in recent years. This paper studies the dynamics modeling and impedance control of a multi-arm free-flying space robotic system capturing a non-cooperative target. Firstly, a control-oriented dynamics model is essential in control algorithm design and code realization. Unlike a numerical algorithm, an analytical approach is suggested. Using a general and a quasi-coordinate Lagrangian formulation, the kinematics and dynamics equations are derived.Then, an impedance control algorithm is developed which allows coordinated control of the multiple manipulators to capture a target.Through enforcing a reference impedance, end-effectors behave like a mass-damper-spring system fixed in inertial space in reaction to any contact force between the capture hands and the target. Meanwhile, the position and the attitude of the base are maintained stably by using gas jet thrusters to work against the manipulators' reaction. Finally, a simulation by using a space robot with two manipulators and a free-floating non-cooperative target is illustrated to verify the effectiveness of the proposed method.
基金National Natural Science Foundation of China(Grant No.51875499).
文摘The hydraulic parallel manipulator combines the high-power density of the hydraulic system and high rigidity of the parallel mechanism with excellent load-carrying capacity.However,the high-precision trajectory tracking control of the hydraulic parallel manipulator is challenged by the coupling dynamics of the parallel mechanism and the high nonlinearities of the hydraulic system.In this study,the trajectory control of a 3-DOF symmetric spherical parallel 3UPS/S manipulator is evaluated.Focusing on the highly coupling and nonlinear system dynamics,a compound impedance control method for a hydraulic driven parallel manipulator is proposed,which combines impedance control with the spatial motion characteristics of a parallel manipulator.The control strategy is divided into the inner and outer loops.The inner loop controls the impedance of the actuator in the joint space,and the outer loop controls the impedance of the entire platform in the task space to compensate the coupling of the actuators and improve the tracking accuracy of the moving platform.Compound impedance control does not require force or pressure sensors and is less dependent on modeling precision.The experimental results show that the compound impedance control effectively improves the tracking accuracy of the moving platform.This research proposes a compound impedance control strategy for a 3-DOF hydraulic parallel manipulator,which has high tracking precision with a simple and cheap system configuration.
文摘For robot interaction control,the interaction force between the robot and the manipulated object or environment should be monitored.Impedance control is a type of interaction control.Specifically,in impedance control,the dynamic relationship between the interaction force and the resulting motion is controlled.In order to control the impedance of a mechanical system,typically,the interaction force has to be sensed.Due to the inherent limitations of direct force sensing at the interaction site,in the present work,the interaction force is observed using robust observers.In particular,to enhance the accuracy of impedance control,a first order sliding mode impedance controller is designed and incorporated in the present paper.Its advantage over positionbased interaction control algorithms is demonstrated through experimentation.Experimental results are given to show the effectiveness of the proposed algorithms.
基金supported in part by the Young Talent Fund of Association for Science and Technology in Shaanxi,China(No.20230126).
文摘In this article, an unknown system dynamics estimator-based impedance control method is proposed for the lower limb exoskeleton to stimulate the tracking flexibility with the terminal target position when suffering parametric inaccuracies and unexpected disturbances. To reinforce the robust performance, via constructing the filtering operation-based dynamic relation, i.e., invariant manifold, the unknown system dynamics estimators are employed to maintain the accurate perturbation identification in both the hip and knee subsystem. Besides, a funnel control technique is designed to govern the convergence process within a minor overshoot and a higher steady-state precision. Meanwhile, an interactive complaint result can be obtained with the aid of the impedance control, where the prescribed terminal trajectory can be adjusted into the interaction variable-based target position by the force–position mapping, revealing the dynamic influence between the impedance coefficient (stiffness and damping) and the adjusted position magnitude. A sufficient stability analysis verifies the ultimately uniformly bounded results of all the error signals, and even the angle errors can be regulated within the predefined funnel boundary in the whole convergence. Finally, some simulations are provided to demonstrate the validity and superiority including the enhanced interaction flexibility and robustness.
基金supported by the National Key Research and Development Program of China (Grant No.2022YFB4702200)the National Natural Science Foundation of China (Grant Nos.52275020,62293514)。
文摘Stiffness adjustment is an important feature of human arm control.The adaptive variable impedance control can adapt to the robotic stiffness,but may result in a large overshoot.In this paper,nonlinear impedance control is proposed for collaborative robotic grinding,where nonlinear force feedback is designed to compensate for the nonlinear stiffness of the environment.Thus,the interaction system can be linearization to ensure the system stability.Moreover,a target trajectory adaptation strategy is studied to ensure the force tracking requirement.Then,switching law between trajectory tracking and force tracking is proposed when the robot performs a complex grinding task.The stability of the switch control as well as the trajectory adaptation law is proved.Experiments are conducted in a robotic grinding test rig,where the robot is used to grind a turbine blade.Experimental results show that the nonlinear impedance control can obtain stable grinding force,and have better grinding quality than the linear impedance control.
文摘As an innovative concept,an optimal predictive impedance controlle is introduced here to control a lower limb rehabilitation robo in the presence of uncertainty.The desired impedance law is considered to propose a conventional model-based impedance controller for the LLRR.However,external disturbances,model imperfection,and parameters uncertainties reduce the performance of the controller in practice.In order to cope with these uncertainties,an optimal predictive compensator is introduced as a solution for a proposed convex optimization problem,which is performed on a forward finite-length horizon.As a result,the LLRR has the desired behavior even in an uncertain environment.The performance and efficiency of the proposed controller are verified by the simulation results.
基金Supported by National Natural Science Foundation of China(Grant No.61773060).
文摘Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.However,it is difficult to obtain its precise dynamic model,because of the nonlinearity and uncertainty of the heavy robot.This paper presents a dynamic control framework with a decentralized structure for single wheel-leg,position tracking based on model predictive control(MPC)and adaptive impedance module from inside to outside.Through the Newton-Euler dynamic model of the Stewart mechanism,the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart.The actuating force naturally enables each strut to stretch and retract,thereby realizing six degrees-of-freedom(6-DOFs)position-tracking for Stewart wheel-leg.The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z-axis.This adjustment allows the robot to adequately control the desired support force tracking,isolating the robot body from vibration that is generated from unknown terrain.The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips.By comparing the proportional and integral(PI)and constant impedance controllers,better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder,as well as an inertial measurement unit(IMU)mounted on the robot body.The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot.
基金supported by the Human Frontier Science Program(RGP0002/2017)the BrØrene Hartmanns Fund(A36775)the Thomas B.Thriges Fund(7648-2106).
文摘Variable Impedance control allows robots and humans to safely and efficiently interact with unknown external environments.This tutorial introduces online impedance adaptation control(OIAC)for variable compliant joint motions in a range of control tasks:rapid(<1 s)movement control(i.e.,whipping to hit),arm and finger impedance quantification,multifunctional exoskeleton control,and robot-inspired human arm control hypothesis.The OIAC has been introduced as a feedback control,which can be integrated into a feedforward control,e.g.,learned by data-driven methods.This integration facilitates the understanding of human and robot arm control,closing a research loop between biomechanics and robotics.It shows not only a research way from biomechanics to robotics,but also another reserved one.This tutorial aims at presenting research examples and Python codes for advancing the understanding of variable impedance adaptation in human and robot motor control.It contributes to the state-of-the-art by providing an online impedance adaptation controller for wearable robots(i.e.,exoskeletons)which can be used in robotic and biomechanical applications.
基金supported by the National Natural Science Foundation(NNSF)of China(61533016,U1613210)the National High-tech Research and Development Program(863 Program)of China(2015AA042306)the Beijing Natural Science Foundation(4161001)
文摘With the development of human robot interaction technologies, haptic interfaces are widely used for 3 D applications to provide the sense of touch. These interfaces have been utilized in medical simulation, virtual assembly and remote manipulation tasks. However, haptic interface design and control are still critical problems to reproduce the highly sensitive touch sense of humans. This paper presents the development and evaluation of a7-DOF(degree of freedom) haptic interface based on the modified delta mechanism. Firstly, both kinematics and dynamics of the modified mechanism are analyzed and presented. A novel gravity compensation algorithm based on the physical model is proposed and validated in simulation. A haptic controller is proposed based on the forward kinematics and the gravity compensation algorithm. To evaluate the control performance of the haptic interface, a prototype has been implemented. Three kinds of experiments: gravity compensation, static response and force tracking are performed respectively. The experimental results show that the mean error of the gravity compensation is less than 0.7 N and the maximum continuous force along the axis can be up to 6 N. This demonstrates the good performance of the proposed haptic interface.
基金supported by the National Natural Science Foundation of China(61403215)the National Natural Science Foundation of Tianjin(13JCYBJC36600)the Fundamental Research Funds for the Central Universities
文摘Human-robot interaction(HRI) is fundamental for human-centered robotics, and has been attracting intensive research for more than a decade. The series elastic actuator(SEA) provides inherent compliance, safety and further benefits for HRI, but the introduced elastic element also brings control difficulties. In this paper, we address the stiffness rendering problem for a cable-driven SEA system, to achieve either low stiffness for good transparency or high stiffness bigger than the physical spring constant, and to assess the rendering accuracy with quantified metrics. By taking a velocity-sourced model of the motor, a cascaded velocity-torque-impedance control structure is established. To achieve high fidelity torque control, the 2-DOF(degree of freedom) stabilizing control method together with a compensator has been used to handle the competing requirements on tracking performance, noise and disturbance rejection,and energy optimization in the cable-driven SEA system. The conventional passivity requirement for HRI usually leads to a conservative design of the impedance controller, and the rendered stiffness cannot go higher than the physical spring constant. By adding a phase-lead compensator into the impedance controller,the stiffness rendering capability was augmented with guaranteed relaxed passivity. Extensive simulations and experiments have been performed, and the virtual stiffness has been rendered in the extended range of 0.1 to 2.0 times of the physical spring constant with guaranteed relaxed passivity for physical humanrobot interaction below 5 Hz. Quantified metrics also verified good rendering accuracy.
基金This work was supported in part by the National Natural Science Foundation of China(61903028)the Youth Innovation Promotion Association,Chinese Academy of Sciences(2020137)+1 种基金the Lifelong Learning Machines Program from DARPA/Microsystems Technology Officethe Army Research Laboratory(W911NF-18-2-0260).
文摘In this paper,we present a novel data-driven design method for the human-robot interaction(HRI)system,where a given task is achieved by cooperation between the human and the robot.The presented HRI controller design is a two-level control design approach consisting of a task-oriented performance optimization design and a plant-oriented impedance controller design.The task-oriented design minimizes the human effort and guarantees the perfect task tracking in the outer-loop,while the plant-oriented achieves the desired impedance from the human to the robot manipulator end-effector in the inner-loop.Data-driven reinforcement learning techniques are used for performance optimization in the outer-loop to assign the optimal impedance parameters.In the inner-loop,a velocity-free filter is designed to avoid the requirement of end-effector velocity measurement.On this basis,an adaptive controller is designed to achieve the desired impedance of the robot manipulator in the task space.The simulation and experiment of a robot manipulator are conducted to verify the efficacy of the presented HRI design framework.
基金the National Key R&D Program of China(Grant No.2021YFB3201600).
文摘Although traditional position-controlled industrial robots can be competent for most assembly tasks,they cannot complete complex tasks that frequently interact with the external environment.The current research on exoskeleton robots also has problems such as excessive inertia of exoskeleton robots,poor system integration and difficult human–computer interaction control.To solve these problems,this paper independently develops a tendon driving robotic system composed of a tendon driving robotic arm and an upper limb exoskeleton,and studies its control technology.First,the robot system is selected,configured,and constructed.Second,the kinematics of the robot is analyzed,and then the dynamics are studied,and the parameter identification experiment of single degree of freedom is completed.Finally,the research on zero-force control and impedance control of the robot has effectively improved the robot’s human–machine integration ability,ensured the flexibility and compliance in the process of human–computer interaction.The compliant control problem expands the usage scenarios and application scope of robots and contributes to the realization of complex operations of this group of robots in unstructured environments.
基金supported in part by the National Natural Science Foundation of China under grants 61873304 and 62173048in part by the China Postdoctoral Science Foundation Funded Project under grant 2018M641784also in part by the Key Science and Technology Project of Jilin Province,China,grant nos.20200404208YY.
文摘To ensure the safety, comfort, and effectiveness of lower limb rehabilitation exoskeleton robots in the rehabilitation training process, compliance is a prerequisite for human–machine interaction safety. First, under the premise of considering the mechanical structure of the lower limb rehabilitation exoskeleton robot (LLRER), when conducting the dynamic transmission of the exoskeleton knee joint, the soft axis is added to ensure that the rotation motion and torque are flexibly transmitted to any position to achieve flexible force transmission. Second, to realize the active compliance control of LLRER, the sliding mode impedance closed-loop controller is developed based on the kinematics and dynamics model of LLRER, and the stability of the designed control system is verified by Lyapunov method. Then the experiment is designed to track the collected bicycle rehabilitation motion data stably, and the algorithm and dynamic model are verified to satisfy the experimental requirements. Finally, aiming at the transmission efficiency and response performance of the soft shaft in the torque transmission process of the knee joint, the soft shaft transmission performance test is carried out to test the soft shaft transmission performance and realize the compliance of the LLRER, so as to ensure that the rehabilitation training can be carried out in a safe and comfortable interactive environment. Through the design of rehabilitation exercise training, it is verified that the LLRER of flexible transmission under sliding mode impedance control has good adaptability in the actual environment, and can achieve accurate and flexible control. During the experiment, the effectiveness of monitoring rehabilitation training is brought through the respiratory belt.
文摘A kind of new acoustic liner with adjustable impedance has been proposed. At the same time, a set of control system has been designed for this kind of liner. Many experimental results have been obtained based on this control system. In fact, the present investigation shows the possibi1ity of active control of sound absorption coefficient or impedance of a liner according to external sound source condition by means of a standing wave tube. The experimental results show that the sound absorption coefficient of the liner can keep optimal under any sound source condition by controlling the cavity depth and the flow rate through the perforated plate of the liner. In addition, hoth the resistance and the reactance of the liner can also be controlled independently corresponding to any given condition. which is necessary to control unsteady How in turbomachinery.
文摘A pneumatic actuator is a fast and economical tool that converts compressed air into mechanical motion.In this paper,an extended state observer(ESO)-based sliding mode controller(SMC)is developed to adjust the air pressure of the actua-tor for accurate position control,Specifically,an impedance control module is established to produce desired air pressure based on the relationship between forces and desired positions.Then,the ESO-based SMC is implemented to adjust the air pressure to the required level despite the presence of system uncertainties and disturbances.As a result,the position of the actuator is controlled to a setpoint through the regulation of pressure.The performance of ESO-based SMC is compared with that of a classic active disturbance rciection controller(ADRC)and a SMC.Simulation results demonstrate that the:ESO-based SMC shows comparable performance to ADRC in terms of precise pressure control.In addition,it requires the least control effort ncessary to excite valves among the three controllers.The stability of ESO based SMC is theoretically justifed through Lyapunov approach.
基金supported in part by the China National Key Research and Development Program under Grant no.2020YFC2007801in part by the National Natural Science Foundation of China under Grant no.U1813209.
文摘Mapping grasps from human to anthropomorphic robotic hands is an open issue in research,because the master hand and the slave hand have dissimilar kinematics.This paper proposes a hybrid mapping method to solve this problem.In the proposed method,fingers in the master and the slave hands are divided into vital and synergic fingers according to their contribution to the grasping task.The tip of the vital finger of the master hand is first mapped to that of the slave hand while ensuring that both are in simultaneous contact with the object to be grasped.Following postural synergy theory,joints of the other synergic fingers of the slave hand are then used to generate an anthropomorphic grasping configuration according to the shape of the object to be grasped.Following this,a human-guided impedance controller is used to reduce the pre-grasping error and realize compliant interaction with the environment.The proposed hybrid mapping method can not only generate the posture of the humanoid envelope but can also carry out impedance-adaptive matching.It was evaluated using simulations and an experiment involving an anthropomorphic robotic slave hand.
