The purpose of this paper is to investigate the performance improvement mechanism of a high power vertical centrifugal pump by using numerical calculations.Therefore,a comparative study of energy losses and internal f...The purpose of this paper is to investigate the performance improvement mechanism of a high power vertical centrifugal pump by using numerical calculations.Therefore,a comparative study of energy losses and internal flow characteristics in the original and optimized models was carried out with special attention to the hydraulic component matching.The optimized model(model B)was obtained by optimizing the vaned diffuser and volute based on the original model(model A),mainly the diffuser inlet diameter,diffuser inlet vane angle,volute channel inlet width and volute throat area were changed.Firstly,the comparative results on performance and energy losses of two models showed that the efficiency and head of model B was significantly increased under design and part-load conditions.It is mainly due to the dramatic reduction of energy loss PL in the diffuser and volute.Then,the comparisons of PL and flow patterns in the vaned diffuser showed that the matching optimization between the model B impeller outlet flow angle and diffuser inlet vane angle resulted in a better flow pattern in both the circumferential and axial directions of the diffuser,which leads to the PL3 reduction.The meridian velocity Vm of model B was significantly increased at diffuser inlet regions and resulted in improvements of flow patterns at diffuser middle and outlet regions as well as pressure expansion capacity.Finally,the comparisons of PL and flow characteristics in the volute showed that the turbulence loss reduction in the model B volute was due to the flow pattern improvement at diffuser outlet regions which provided better flow conditions at volute inlet regions.The matching optimization between the diffuser and volute significantly reduced the turbulence loss in volute sections 1–4 and enhanced the pressure expansion capacity in sections 8–10.展开更多
In recent scenario of Wireless Sensor Networks(WSNs),there are many application developed for handling sensitive and private data such as military information,surveillance data,tracking,etc.Hence,the sensor nodes of W...In recent scenario of Wireless Sensor Networks(WSNs),there are many application developed for handling sensitive and private data such as military information,surveillance data,tracking,etc.Hence,the sensor nodes of WSNs are distributed in an intimidating region,which is non-rigid to attacks.The recent research domains of WSN deal with models to handle the WSN communications against malicious attacks and threats.In traditional models,the solution has been made for defending the networks,only to specific attacks.However,in real-time applications,the kind of attack that is launched by the adversary is not known.Additionally,on developing a security mechanism for WSN,the resource constraints of sensor nodes are also to be considered.With that note,this paper presents an Enhanced Security Model with Improved Defensive Routing Mechanism(IDRM)for defending the sensor network from various attacks.Moreover,for efficient model design,the work includes the part of feature evaluation of some general attacks of WSNs.The IDRM also includes determination of optimal secure paths and Node security for secure routing operations.The performance of the proposed model is evaluated with respect to several factors;it is found that the model has achieved better security levels and is efficient than other existing models in WSN communications.It is proven that the proposed IDRM produces 74%of PDR in average and a minimized packet drop of 38%when comparing with the existing works.展开更多
At present,ideological and political education is significant for poor college students.The focus of funding for poor students has gradually transformed from providing economic support for them to ideological and spir...At present,ideological and political education is significant for poor college students.The focus of funding for poor students has gradually transformed from providing economic support for them to ideological and spiritual help,which puts forward higher requirements on how to carry out ideological and political work.It also requires us to advance the work of ideological and moral education and put it in the most important position in the ideological and educational work for poor college students.Combined with the reality of poor college students,we will adhere to the idea of being student-oriented and endeavor to enhance the effectiveness,pertinence,and relevance of the work of ideological and political education.This paper analyzes the significance and problems of ideological and political education for poor college students and puts forward effective ways to solve the problems from the levels of ideology,cognition,and teaching staff.展开更多
Continuous CNT fibers have been directly fabricated in a speed of 50 m/h-400 m/h,based on an improved chemical vapor deposition method.As-prepared fibers are further post-treated by acid.According to the SEM images an...Continuous CNT fibers have been directly fabricated in a speed of 50 m/h-400 m/h,based on an improved chemical vapor deposition method.As-prepared fibers are further post-treated by acid.According to the SEM images and Raman spectra,the acid treatment results in the compaction and surface modification of the CNTs in fibers,which are beneficial for the electron and load transfer.Compared to the HNO3 treatment,HClSO_3 or H_2SO_4 treatment is more effective for the improvement of the fibers＇ properties.After HCISO_3 treatment for 2 h,the fibers＇ strength and electrical conductivity reach up to-2 GPa and-4.3 MS/m,which are promoted by-200%and almost one order of magnitude than those without acid treatment,respectively.The load-bearing status of the CNT fibers are analyzed based on the downshifts of the G＇ band and the strain transfer factor of the fibers under tension.The results reveal that acid treatment could greatly enhance the load transfer and inter-bundle strength.With the HCISO3 treatment,the strain transfer factor is enhanced from-3.9%to-53.6%.展开更多
Recently,multi-pass caliber rolling has been shown to be effective for Mg alloys.This study investigated the effect of subsequent annealing on the mechanical properties of a caliber-rolled AZ31 Mg alloy to modulate th...Recently,multi-pass caliber rolling has been shown to be effective for Mg alloys.This study investigated the effect of subsequent annealing on the mechanical properties of a caliber-rolled AZ31 Mg alloy to modulate the strength-ductility relationship.This annealing gave rise to different trends in mechanical properties depending on the temperature regime.Low-temperature annealing(T≤473 K)exhibited a typical trade-off relationship,where an increase in annealing temperature resulted in increased ductility but decreased strength and hardness.Such a heat treatment did not degrade the high strength-ductility balance of the caliber-rolled alloy,suggesting that the mechanical properties could be tailored for different potential applications.In contrast,high-temperature annealing(T>473 K)caused a simultaneous deterioration in strength,hardness,and ductility with increasing annealing temperature.These differences are discussed in terms of the varying microstructural features under the different investigated annealing regimes.展开更多
Existing mechanism of simulating soil movement at tunnel face is generally based on the translational or rotational velocity field,which is,to some extent,different from the real soil movement in the arching zone.Nume...Existing mechanism of simulating soil movement at tunnel face is generally based on the translational or rotational velocity field,which is,to some extent,different from the real soil movement in the arching zone.Numerical simulations are carried out first to investigate the characteristics of the velocity distribution at tunnel face and above tunnel vault.Then a new kinematically admissible velocity field is proposed to improve the description of the soil movement according to the results of the numerical simulation.Based on the proposed velocity field,an improved failure mechanism is constructed adopting the spatial discretization technique,which takes into account soil arching effect and plastic deformation within soil mass.Finally,the critical face pressure and the proposed mechanism are compared with the results of the numerical simulation,existing analytical studies and experimental tests to verify the accuracy and improvement of the presented method.The proposed mechanism can serve as an alternative approach for the face stability analysis.展开更多
A multi-pass caliber rolling has attracted attentions as an alternative to severe plastic deformation processes.The present study enhanced strength and ductility of AZ31 Mg alloy simultaneously through the application...A multi-pass caliber rolling has attracted attentions as an alternative to severe plastic deformation processes.The present study enhanced strength and ductility of AZ31 Mg alloy simultaneously through the application of caliber rolling.The improving trends in tensile properties were interpreted with various caliber-rolling strains.The oval/circular-shaped calibers imposed a high plastic strain at the center of crosssection,leading to effective grain refinement to submicron scale.This work also confirmed the texture randomizing effect of caliber rolling.Such microstructural evolutions gave rise to the fabrication of high-strength material.Moreover,the caliber-rolled AZ31 Mg alloys exhibited an improvement in ductility as compared to the as-received sheet-rolled material.This was discussed in terms of activation of non-basal slip systems and suppression of mechanical twinning.This study successfully proved the possibility of caliber rolling to produce a bulk Mg rod with enhanced tensile properties.展开更多
FeAl/TiC composites were fabricated by hot pressing blended elemental powders. The effects of Ni-doping on thedensification and mechanical properties of the composites were studied. Results show that the density of th...FeAl/TiC composites were fabricated by hot pressing blended elemental powders. The effects of Ni-doping on thedensification and mechanical properties of the composites were studied. Results show that the density of the composites decreases with the content of TiC increasing, and the addition of Ni significantly improves the densificationprocess by enhancing mass transfer in the bonding phase. The mechanical properties of the composites are closelyrelated with their porosity. Besides increasing the density of the composites, the addition of Ni improves the mechanical properties by other three effects: solution-strengthening the bonding phase, strengthening the FeAI-TiC interfaceand increasing ductile fracture in FeAl phase.展开更多
At present, the huge problem that China’s Non-profit Organizations are facing is the low efficiency of public fundraising. However, the newly appeared Online Fundraising Platform indicates some possibilities in ove...At present, the huge problem that China’s Non-profit Organizations are facing is the low efficiency of public fundraising. However, the newly appeared Online Fundraising Platform indicates some possibilities in overcoming the obstacle for public fundraising. Among which Tencent Online Fundraising Platform becomes the typical and the point cut of exploring Online Fundraising Platform Improving Efficiency Mechanism of public donation. Online Fundraising Platform is similar to the online United Way, relying on the advantages of the Internet and the united fundraising to build a ecosystem of public donation which has professional fundraising system, good charity atmosphere, excellent policy environment and crossover cooperation resources. And in which, many factors get improved in pubic donation influence factors system. For one thing, Charity atmosphere and policy environment can be shaped better. For another, the charities can transmit fundraising information in inexpensive and high-efficiency way, and must ensure the transparency of project and donation. Finally, it will be more convenient for donors to get charitable information, make donations and supervise the nonprofit organizations.展开更多
Objective To increase the mechanic characteristic of bovine jugular veins conduit (BJVC) by combined knitted stent outside made of nylon fiber. Methods Got rid of the cells of BJVC by enzymolysis,then combined a fabri...Objective To increase the mechanic characteristic of bovine jugular veins conduit (BJVC) by combined knitted stent outside made of nylon fiber. Methods Got rid of the cells of BJVC by enzymolysis,then combined a fabric stent with a acellular bovine jugular vein展开更多
In this work, a bimetallic zeolitic imidazolate framework （ZIF） CoZn-ZIF was synthesized via a facile sol-vothermal approach and applied in lithiumion batteries. The as-prepared CoZn-ZIF shows a high reversible capa...In this work, a bimetallic zeolitic imidazolate framework （ZIF） CoZn-ZIF was synthesized via a facile sol-vothermal approach and applied in lithiumion batteries. The as-prepared CoZn-ZIF shows a high reversible capacity of 605.8 mA b g-i at a current density of 100 mA g^-1, far beyond the performance of the corresponding monometallic Co-ZIF- 67 and Zn-ZIF-8. Ex-situ synchrotron soft X-ray absorption spectroscopy, X-ray diffraction, and electron paramagnetic resonance techniques were employed to explore the Li^storage mechanism. The superior performance of CoZn-ZIF over Co-ZIF-67 and Zn-ZIF-8 could be mainly attributed to lithiation and delithiation of nitrogen atoms, accompanied by the breakage and recoordination of metal nitrogen bond. Morever, a few metal nitrogen bonds without recoordination will lead to the amorphization of CoZn-ZIF and the formation of few nitrogen radicals.展开更多
On the basis of analyzing the shortage of scale measure of the current AHP, and following base principIe of two comparison: principle of reward-punishment and principle of conversion, translation function and concilia...On the basis of analyzing the shortage of scale measure of the current AHP, and following base principIe of two comparison: principle of reward-punishment and principle of conversion, translation function and conciliation coefficient have been structured. This article advances a new measure which structuring translation function and conciliation coefficient. The result of application of improved AHP on the synthesis evaluation of agricultural mechanization is satisfactory.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.51979125)supported by the Jiangsu Provincial Science Fund for Distinguished Young Scholars(Grant No.BK20211547)+2 种基金the Technological Innovation Team Project in Colleges and Universities of Jiangsu Province(Grant No.SKJ(2021)-1)the Open Research Subject of Key Laboratory of Fluid Machinery and Engineering(Xihua University)of Sichuan Province(Grant No.LTDL-2022007)the Graduate Research and Innovation Projects of Jiangsu Province(Grant No.KYCX23_3701).
文摘The purpose of this paper is to investigate the performance improvement mechanism of a high power vertical centrifugal pump by using numerical calculations.Therefore,a comparative study of energy losses and internal flow characteristics in the original and optimized models was carried out with special attention to the hydraulic component matching.The optimized model(model B)was obtained by optimizing the vaned diffuser and volute based on the original model(model A),mainly the diffuser inlet diameter,diffuser inlet vane angle,volute channel inlet width and volute throat area were changed.Firstly,the comparative results on performance and energy losses of two models showed that the efficiency and head of model B was significantly increased under design and part-load conditions.It is mainly due to the dramatic reduction of energy loss PL in the diffuser and volute.Then,the comparisons of PL and flow patterns in the vaned diffuser showed that the matching optimization between the model B impeller outlet flow angle and diffuser inlet vane angle resulted in a better flow pattern in both the circumferential and axial directions of the diffuser,which leads to the PL3 reduction.The meridian velocity Vm of model B was significantly increased at diffuser inlet regions and resulted in improvements of flow patterns at diffuser middle and outlet regions as well as pressure expansion capacity.Finally,the comparisons of PL and flow characteristics in the volute showed that the turbulence loss reduction in the model B volute was due to the flow pattern improvement at diffuser outlet regions which provided better flow conditions at volute inlet regions.The matching optimization between the diffuser and volute significantly reduced the turbulence loss in volute sections 1–4 and enhanced the pressure expansion capacity in sections 8–10.
文摘In recent scenario of Wireless Sensor Networks(WSNs),there are many application developed for handling sensitive and private data such as military information,surveillance data,tracking,etc.Hence,the sensor nodes of WSNs are distributed in an intimidating region,which is non-rigid to attacks.The recent research domains of WSN deal with models to handle the WSN communications against malicious attacks and threats.In traditional models,the solution has been made for defending the networks,only to specific attacks.However,in real-time applications,the kind of attack that is launched by the adversary is not known.Additionally,on developing a security mechanism for WSN,the resource constraints of sensor nodes are also to be considered.With that note,this paper presents an Enhanced Security Model with Improved Defensive Routing Mechanism(IDRM)for defending the sensor network from various attacks.Moreover,for efficient model design,the work includes the part of feature evaluation of some general attacks of WSNs.The IDRM also includes determination of optimal secure paths and Node security for secure routing operations.The performance of the proposed model is evaluated with respect to several factors;it is found that the model has achieved better security levels and is efficient than other existing models in WSN communications.It is proven that the proposed IDRM produces 74%of PDR in average and a minimized packet drop of 38%when comparing with the existing works.
文摘At present,ideological and political education is significant for poor college students.The focus of funding for poor students has gradually transformed from providing economic support for them to ideological and spiritual help,which puts forward higher requirements on how to carry out ideological and political work.It also requires us to advance the work of ideological and moral education and put it in the most important position in the ideological and educational work for poor college students.Combined with the reality of poor college students,we will adhere to the idea of being student-oriented and endeavor to enhance the effectiveness,pertinence,and relevance of the work of ideological and political education.This paper analyzes the significance and problems of ideological and political education for poor college students and puts forward effective ways to solve the problems from the levels of ideology,cognition,and teaching staff.
基金Project supported by the National Basic Research Program of China(Grant No.2012CB932302)the National Natural Science Foundation of China(Grant Nos.11634014,51172271,51372269,and 51472264)the“Strategic Priority Research Program”of the Chinese Academy of Sciences(Grant No.XDA09040202)
文摘Continuous CNT fibers have been directly fabricated in a speed of 50 m/h-400 m/h,based on an improved chemical vapor deposition method.As-prepared fibers are further post-treated by acid.According to the SEM images and Raman spectra,the acid treatment results in the compaction and surface modification of the CNTs in fibers,which are beneficial for the electron and load transfer.Compared to the HNO3 treatment,HClSO_3 or H_2SO_4 treatment is more effective for the improvement of the fibers＇ properties.After HCISO_3 treatment for 2 h,the fibers＇ strength and electrical conductivity reach up to-2 GPa and-4.3 MS/m,which are promoted by-200%and almost one order of magnitude than those without acid treatment,respectively.The load-bearing status of the CNT fibers are analyzed based on the downshifts of the G＇ band and the strain transfer factor of the fibers under tension.The results reveal that acid treatment could greatly enhance the load transfer and inter-bundle strength.With the HCISO3 treatment,the strain transfer factor is enhanced from-3.9%to-53.6%.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)through GCRC-SOP(No.2011-0030013).
文摘Recently,multi-pass caliber rolling has been shown to be effective for Mg alloys.This study investigated the effect of subsequent annealing on the mechanical properties of a caliber-rolled AZ31 Mg alloy to modulate the strength-ductility relationship.This annealing gave rise to different trends in mechanical properties depending on the temperature regime.Low-temperature annealing(T≤473 K)exhibited a typical trade-off relationship,where an increase in annealing temperature resulted in increased ductility but decreased strength and hardness.Such a heat treatment did not degrade the high strength-ductility balance of the caliber-rolled alloy,suggesting that the mechanical properties could be tailored for different potential applications.In contrast,high-temperature annealing(T>473 K)caused a simultaneous deterioration in strength,hardness,and ductility with increasing annealing temperature.These differences are discussed in terms of the varying microstructural features under the different investigated annealing regimes.
基金financial support provided by the National Natural Science Foundation of China(Grant No.51978042)。
文摘Existing mechanism of simulating soil movement at tunnel face is generally based on the translational or rotational velocity field,which is,to some extent,different from the real soil movement in the arching zone.Numerical simulations are carried out first to investigate the characteristics of the velocity distribution at tunnel face and above tunnel vault.Then a new kinematically admissible velocity field is proposed to improve the description of the soil movement according to the results of the numerical simulation.Based on the proposed velocity field,an improved failure mechanism is constructed adopting the spatial discretization technique,which takes into account soil arching effect and plastic deformation within soil mass.Finally,the critical face pressure and the proposed mechanism are compared with the results of the numerical simulation,existing analytical studies and experimental tests to verify the accuracy and improvement of the presented method.The proposed mechanism can serve as an alternative approach for the face stability analysis.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.2018R1C1B6002068).
文摘A multi-pass caliber rolling has attracted attentions as an alternative to severe plastic deformation processes.The present study enhanced strength and ductility of AZ31 Mg alloy simultaneously through the application of caliber rolling.The improving trends in tensile properties were interpreted with various caliber-rolling strains.The oval/circular-shaped calibers imposed a high plastic strain at the center of crosssection,leading to effective grain refinement to submicron scale.This work also confirmed the texture randomizing effect of caliber rolling.Such microstructural evolutions gave rise to the fabrication of high-strength material.Moreover,the caliber-rolled AZ31 Mg alloys exhibited an improvement in ductility as compared to the as-received sheet-rolled material.This was discussed in terms of activation of non-basal slip systems and suppression of mechanical twinning.This study successfully proved the possibility of caliber rolling to produce a bulk Mg rod with enhanced tensile properties.
基金This work was supported by Hunan Provincial Natural Science Foundation.
文摘FeAl/TiC composites were fabricated by hot pressing blended elemental powders. The effects of Ni-doping on thedensification and mechanical properties of the composites were studied. Results show that the density of the composites decreases with the content of TiC increasing, and the addition of Ni significantly improves the densificationprocess by enhancing mass transfer in the bonding phase. The mechanical properties of the composites are closelyrelated with their porosity. Besides increasing the density of the composites, the addition of Ni improves the mechanical properties by other three effects: solution-strengthening the bonding phase, strengthening the FeAI-TiC interfaceand increasing ductile fracture in FeAl phase.
文摘At present, the huge problem that China’s Non-profit Organizations are facing is the low efficiency of public fundraising. However, the newly appeared Online Fundraising Platform indicates some possibilities in overcoming the obstacle for public fundraising. Among which Tencent Online Fundraising Platform becomes the typical and the point cut of exploring Online Fundraising Platform Improving Efficiency Mechanism of public donation. Online Fundraising Platform is similar to the online United Way, relying on the advantages of the Internet and the united fundraising to build a ecosystem of public donation which has professional fundraising system, good charity atmosphere, excellent policy environment and crossover cooperation resources. And in which, many factors get improved in pubic donation influence factors system. For one thing, Charity atmosphere and policy environment can be shaped better. For another, the charities can transmit fundraising information in inexpensive and high-efficiency way, and must ensure the transparency of project and donation. Finally, it will be more convenient for donors to get charitable information, make donations and supervise the nonprofit organizations.
文摘Objective To increase the mechanic characteristic of bovine jugular veins conduit (BJVC) by combined knitted stent outside made of nylon fiber. Methods Got rid of the cells of BJVC by enzymolysis,then combined a fabric stent with a acellular bovine jugular vein
基金supported by the National Natural Science Foundation of China for Excellent Young Scholars(21522303)the National Natural Science Foundation of China(21373086)+3 种基金the Basic Research Project of Shanghai Science and Technology Committee(14JC1491000)the Large Instruments Open Foundation of East China Normal Universitythe National Key Basic Research Program of China(2013CB921800)the National High Technology Research and Development Program of China(2014AA123401)
文摘In this work, a bimetallic zeolitic imidazolate framework （ZIF） CoZn-ZIF was synthesized via a facile sol-vothermal approach and applied in lithiumion batteries. The as-prepared CoZn-ZIF shows a high reversible capacity of 605.8 mA b g-i at a current density of 100 mA g^-1, far beyond the performance of the corresponding monometallic Co-ZIF- 67 and Zn-ZIF-8. Ex-situ synchrotron soft X-ray absorption spectroscopy, X-ray diffraction, and electron paramagnetic resonance techniques were employed to explore the Li^storage mechanism. The superior performance of CoZn-ZIF over Co-ZIF-67 and Zn-ZIF-8 could be mainly attributed to lithiation and delithiation of nitrogen atoms, accompanied by the breakage and recoordination of metal nitrogen bond. Morever, a few metal nitrogen bonds without recoordination will lead to the amorphization of CoZn-ZIF and the formation of few nitrogen radicals.
基金The project is supported by National Natural Science Foundation of China (39770432)ZhejiangProvincial Natural Science Founda
文摘On the basis of analyzing the shortage of scale measure of the current AHP, and following base principIe of two comparison: principle of reward-punishment and principle of conversion, translation function and conciliation coefficient have been structured. This article advances a new measure which structuring translation function and conciliation coefficient. The result of application of improved AHP on the synthesis evaluation of agricultural mechanization is satisfactory.
