Flexible pressure sensors have many potential applications in the monitoring of physiological signals because of their good biocompatibil-ity and wearability.However,their relatively low sensitivity,linearity,and stab...Flexible pressure sensors have many potential applications in the monitoring of physiological signals because of their good biocompatibil-ity and wearability.However,their relatively low sensitivity,linearity,and stability have hindered their large-scale commercial application.Herein,aflexible capacitive pressure sensor based on an interdigital electrode structure with two porous microneedle arrays(MNAs)is pro-posed.The porous substrate that constitutes the MNA is a mixed product of polydimethylsiloxane and NaHCO3.Due to its porous and interdigital structure,the maximum sensitivity(0.07 kPa-1)of a porous MNA-based pressure sensor was found to be seven times higher than that of an imporous MNA pressure sensor,and it was much greater than that of aflat pressure sensor without a porous MNA structure.Finite-element analysis showed that the interdigital MNA structure can greatly increase the strain and improve the sensitivity of the sen-sor.In addition,the porous MNA-based pressure sensor was found to have good stability over 1500 loading cycles as a result of its bilayer parylene-enhanced conductive electrode structure.Most importantly,it was found that the sensor could accurately monitor the motion of afinger,wrist joint,arm,face,abdomen,eye,and Adam’s apple.Furthermore,preliminary semantic recognition was achieved by monitoring the movement of the Adam’s apple.Finally,multiple pressure sensors were integrated into a 33 array to detect a spatial pressure distribu-×tion.Compared to the sensors reported in previous works,the interdigital electrode structure presented in this work improves sensitivity and stability by modifying the electrode layer rather than the dielectric layer.展开更多
Currently,the increasing demands for portable,implantable,and wearable electronics have triggered the interest in miniaturized energy storage devices.Different from conventional energy storage devices,interdigital mic...Currently,the increasing demands for portable,implantable,and wearable electronics have triggered the interest in miniaturized energy storage devices.Different from conventional energy storage devices,interdigital microbatteries(IMBs) are free of separators and prepared on a single substrate,potentially achieving a short ionic diffusion path and better performance.Meanwhile,they can be easily fabricated and integrated into on-chip miniaturized electronics,holding the promise to provide long-lasting power for advanced microelectronic devices.To date,while many seminal works have been reviewed the topic of microbatteries,there is no work that systematically summarizes the development of IMBs of high energy density and stable voltage platforms from fabrication,functionalization to integration.The current review focuses on the most recent progress in IMBs,discussing advanced micromachining techniques with compatible features to construct high-performance IMBs with smart functions and intelligent integrated systems.The future opportunities and challenges of IMBs are also highlighted,calling for more efforts in this dynamic and fast-growing research field.展开更多
Lamb waves are used to detect fouling in food vessels. The propagation of the Lamb waves in plates exhibits many modes and dispersion characteristics, which have great influence on fouling detection. The relative dist...Lamb waves are used to detect fouling in food vessels. The propagation of the Lamb waves in plates exhibits many modes and dispersion characteristics, which have great influence on fouling detection. The relative distribution of the in-plane and out-of-plane displacement of the mode across the thickness of the plate will determine the sensitivity of the mode to a particular loading condition. By considering the dispersion and multi-mode characteristics of guided waves, an interdigital polyvi- nylidene fluoride （PVDF） transducer is designed to realize the mode selection of gnided waves, and a single a0 mode is used for guided wave detection. Fouling detection experiments are conducted in the laboratory using epoxy adhesive on a thin plate. Using the interdigital PVDF transducer, three fouled areas are detected. Using one of the time-frequency analysis methods, the waveforms are further processed. This also demonstrates the validity of this method of fouling detection.展开更多
A broadband(BB)mode is observed by collective Thomson scattering diagnostics in repeatable shots of EAST and analyzed for the first time.This BB mode usually grows during L–H transitions,featuring a BB quasi-coherent...A broadband(BB)mode is observed by collective Thomson scattering diagnostics in repeatable shots of EAST and analyzed for the first time.This BB mode usually grows during L–H transitions,featuring a BB quasi-coherent mode with increasing frequency.During H-mode operations,it is characterized by steady-state BB in the high-frequency range(f~200–2000 k Hz),at the electron scale(k_(θ)ρ_(s)=1–2),mainly driven by the density gradient,and is sensitive to the value ofηein the region of interest(ρ=0.4–0.8),wherehe=(R/L_(Te))/(R/L_(ne))is the ratio of the normalized electron temperature gradient and density gradient,and the regionρ=0.4–0.8 usually has a relatively low collisionality(v_(eff)<5).The frequency of BB is found to be dependent on the electron temperature and density gradient,which is a typical feature of electron-driven turbulence.A negative correlation between the energy confinement and the intensity of the BB turbulence during H-mode has been found,which indicates a strong electron thermal transport induced by the BB turbulence.The BB significantly decreases the electron temperature and causes flatter electron temperature profiles in the region of interest(ρ=0.4–0.8),thus makingηedecrease and the BB destabilize further.These characteristics of BB are related to the theoretical density gradient-driven trapped electron mode.It should be noted that this mode is not observed by other diagnostics in EAST,and shows very different features to the coherent modes in the edge.展开更多
The blob properties in I-mode and ELM-free H-mode plasmas compared to L-mode have been investigated on the EAST tokamak,including the blob detection rate Nb,sizeδb,lifetimeτb and radial velocity vr,b.The blob proper...The blob properties in I-mode and ELM-free H-mode plasmas compared to L-mode have been investigated on the EAST tokamak,including the blob detection rate Nb,sizeδb,lifetimeτb and radial velocity vr,b.The blob properties in L-mode and I-mode are similar,and those in ELM-free H-mode are different to them.The blob Nbis smaller whileτbis larger in H-mode.The experimental blob sizeδband velocity scalings vr,b-δb show a good agreement with the theoretical models.The variation in blob properties during the L-I and H-L transitions,and their relations to the scrape-off layer(SOL)density,edge and SOL turbulence,and SOL collisionality are discussed.The suppression of the edge(inside the last closed flux surface)turbulence is not reflected in the blob behavior,while the blob detection rate shows a correlation with the SOL density and its low-frequency(3–50 kH z)fluctuations.In addition,the blob detection rate is found to increase with the divertor collisionalityΛdiv,indicating a dependence of blob behavior onΛdiv.The differences in blob detection rates among the three operating regimes might be due to their different SOL densities and collisionalities.The investigation contributes to understanding the influences of edge and SOL plasma parameters on the blob behavior.展开更多
基金supported in part by the National Natural Science Foundation of China(Grant No.62104056)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LQ21F010010)+4 种基金the National Natural Science Foundation of China(Grant Nos.62141409 and 62204204)the National Key R&D Program of China(Grant No.2022ZD0208602)the Zhejiang Provincial Key Research&Development Fund(Grant Nos.2019C04003 and 2021C01041)the Shanghai Sailing Program(Grant No.21YF1451000)the Key Research and Development Program of Shaanxi(Grant No.2022GY-001).
文摘Flexible pressure sensors have many potential applications in the monitoring of physiological signals because of their good biocompatibil-ity and wearability.However,their relatively low sensitivity,linearity,and stability have hindered their large-scale commercial application.Herein,aflexible capacitive pressure sensor based on an interdigital electrode structure with two porous microneedle arrays(MNAs)is pro-posed.The porous substrate that constitutes the MNA is a mixed product of polydimethylsiloxane and NaHCO3.Due to its porous and interdigital structure,the maximum sensitivity(0.07 kPa-1)of a porous MNA-based pressure sensor was found to be seven times higher than that of an imporous MNA pressure sensor,and it was much greater than that of aflat pressure sensor without a porous MNA structure.Finite-element analysis showed that the interdigital MNA structure can greatly increase the strain and improve the sensitivity of the sen-sor.In addition,the porous MNA-based pressure sensor was found to have good stability over 1500 loading cycles as a result of its bilayer parylene-enhanced conductive electrode structure.Most importantly,it was found that the sensor could accurately monitor the motion of afinger,wrist joint,arm,face,abdomen,eye,and Adam’s apple.Furthermore,preliminary semantic recognition was achieved by monitoring the movement of the Adam’s apple.Finally,multiple pressure sensors were integrated into a 33 array to detect a spatial pressure distribu-×tion.Compared to the sensors reported in previous works,the interdigital electrode structure presented in this work improves sensitivity and stability by modifying the electrode layer rather than the dielectric layer.
基金financial support from the National Natural Science Foundation of China(NSFC)(22109009)the China Postdoctoral Science Foundation(2020M680376)+2 种基金the National Key R&D Program of China(2017YFB1104300)the NSFC(21975027,22035005,52073159)the NSFC-STINT(21911530143)。
文摘Currently,the increasing demands for portable,implantable,and wearable electronics have triggered the interest in miniaturized energy storage devices.Different from conventional energy storage devices,interdigital microbatteries(IMBs) are free of separators and prepared on a single substrate,potentially achieving a short ionic diffusion path and better performance.Meanwhile,they can be easily fabricated and integrated into on-chip miniaturized electronics,holding the promise to provide long-lasting power for advanced microelectronic devices.To date,while many seminal works have been reviewed the topic of microbatteries,there is no work that systematically summarizes the development of IMBs of high energy density and stable voltage platforms from fabrication,functionalization to integration.The current review focuses on the most recent progress in IMBs,discussing advanced micromachining techniques with compatible features to construct high-performance IMBs with smart functions and intelligent integrated systems.The future opportunities and challenges of IMBs are also highlighted,calling for more efforts in this dynamic and fast-growing research field.
基金This project is supported by National Natural Science Foundation of China (No. 60404017)Municipal Natural Science Foundation of Beijing, China (No.4052008)Plan of Excellent People Cultivation of Beijing, China (No. 20051D0501506)
文摘Lamb waves are used to detect fouling in food vessels. The propagation of the Lamb waves in plates exhibits many modes and dispersion characteristics, which have great influence on fouling detection. The relative distribution of the in-plane and out-of-plane displacement of the mode across the thickness of the plate will determine the sensitivity of the mode to a particular loading condition. By considering the dispersion and multi-mode characteristics of guided waves, an interdigital polyvi- nylidene fluoride （PVDF） transducer is designed to realize the mode selection of gnided waves, and a single a0 mode is used for guided wave detection. Fouling detection experiments are conducted in the laboratory using epoxy adhesive on a thin plate. Using the interdigital PVDF transducer, three fouled areas are detected. Using one of the time-frequency analysis methods, the waveforms are further processed. This also demonstrates the validity of this method of fouling detection.
基金supported by National Natural Science Foundation of China(No.11875286)the National Key R&D Program of China(No.2019YFE03010002)CAS President’s International Fellowship Initiative(No.2022VMB0007)。
文摘A broadband(BB)mode is observed by collective Thomson scattering diagnostics in repeatable shots of EAST and analyzed for the first time.This BB mode usually grows during L–H transitions,featuring a BB quasi-coherent mode with increasing frequency.During H-mode operations,it is characterized by steady-state BB in the high-frequency range(f~200–2000 k Hz),at the electron scale(k_(θ)ρ_(s)=1–2),mainly driven by the density gradient,and is sensitive to the value ofηein the region of interest(ρ=0.4–0.8),wherehe=(R/L_(Te))/(R/L_(ne))is the ratio of the normalized electron temperature gradient and density gradient,and the regionρ=0.4–0.8 usually has a relatively low collisionality(v_(eff)<5).The frequency of BB is found to be dependent on the electron temperature and density gradient,which is a typical feature of electron-driven turbulence.A negative correlation between the energy confinement and the intensity of the BB turbulence during H-mode has been found,which indicates a strong electron thermal transport induced by the BB turbulence.The BB significantly decreases the electron temperature and causes flatter electron temperature profiles in the region of interest(ρ=0.4–0.8),thus makingηedecrease and the BB destabilize further.These characteristics of BB are related to the theoretical density gradient-driven trapped electron mode.It should be noted that this mode is not observed by other diagnostics in EAST,and shows very different features to the coherent modes in the edge.
基金supported by the National Key R&D Program of China(Nos.2022YFE03020004,2017YFE0301300,2018YFE0303104 and 2019YFE03030000)the Major Science and Technology Infrastructure Maintenance and Reconstruction Projects of the Chinese Academy of Sciences+3 种基金National Natural Science Foundation of China(Nos.12275313,11922513,12005004 and U19A20113)the Institute of Energy,Hefei Comprehensive National Science Center(No.GXXT-2020-004)the Anhui Provincial Natural Science Foundation(No.2008085QA38)the Users with Excellence Program of Hefei Science Center,Chinese Academy of Sciences(No.2020HSC-UE009)。
文摘The blob properties in I-mode and ELM-free H-mode plasmas compared to L-mode have been investigated on the EAST tokamak,including the blob detection rate Nb,sizeδb,lifetimeτb and radial velocity vr,b.The blob properties in L-mode and I-mode are similar,and those in ELM-free H-mode are different to them.The blob Nbis smaller whileτbis larger in H-mode.The experimental blob sizeδband velocity scalings vr,b-δb show a good agreement with the theoretical models.The variation in blob properties during the L-I and H-L transitions,and their relations to the scrape-off layer(SOL)density,edge and SOL turbulence,and SOL collisionality are discussed.The suppression of the edge(inside the last closed flux surface)turbulence is not reflected in the blob behavior,while the blob detection rate shows a correlation with the SOL density and its low-frequency(3–50 kH z)fluctuations.In addition,the blob detection rate is found to increase with the divertor collisionalityΛdiv,indicating a dependence of blob behavior onΛdiv.The differences in blob detection rates among the three operating regimes might be due to their different SOL densities and collisionalities.The investigation contributes to understanding the influences of edge and SOL plasma parameters on the blob behavior.
