The sufficient bond between concrete and rock is an important prerequisite to ensure the effect of shotcrete support. However, in cold regions engineering protection system, the bond condition of rock and concrete sur...The sufficient bond between concrete and rock is an important prerequisite to ensure the effect of shotcrete support. However, in cold regions engineering protection system, the bond condition of rock and concrete surface is easily affected by freeze-thaw cycles, resulting in interface damage, debonding and even supporting failure. Understanding the micromechanisms of the damage and debonding of the rock-concrete interface is essential for improving the interface protection.Therefore, the micromorphology, micromechanical properties, and microdebonding evolution of the sandstone-concrete interface transition zone(ITZ) under varying freeze-thaw cycles(0, 5, 10, 15, 20) were studied using scanning electron microscope, stereoscopic microscope, and nano-indentation. Furthermore, the distribution range and evolution process of ITZ affected by freeze-thaw cycles were defined. Major findings of this study are as follows:(1) The microdamage evolution law of the ITZ under increasing freeze-thaw cycles is clarified, and the relationship between the number of cracks in the ITZ and freeze-thaw cycles is established;(2) As the number of freeze-thaw cycles increases, the ITZ's micromechanical strength decreases, and its development width tends to increase;(3) The damage and debonding evolution mechanisms of sandstone-concrete ITZ under freeze-thaw cycles is revealed, and its micromechanical evolution model induced by freeze-thaw cycles is proposed.展开更多
Consideration of stable isotopes in precipitation is valuable for investigating hydrological processes.Therefore,correcting the measured isotopic composition of precipitation under below-cloud evaporation is necessary...Consideration of stable isotopes in precipitation is valuable for investigating hydrological processes.Therefore,correcting the measured isotopic composition of precipitation under below-cloud evaporation is necessary.An accurate description of the underlying processes affecting stable isotopic composition of precipitation could help improve our understanding of the water cycle.The transitivity between monsoonal and arid climates was reflected by the evaporation rate of falling raindrops in precipitation in the Qilian Mountains,a typical transition zone between Tibetan Plateau and arid region of China.Considering 1310 precipitation event-scale samples,based on stable isotope analysis method,the mean below-cloud evaporation rate(f)in the study area was measured as 12.00%during the summer half-year(May-October).The evaporation rate on the northern slopes(12.70%)of the Qilian Mountains in China was significantly higher than that on the southern slopes(9.98%).The transition between monsoonal and arid climates was reflected in the evaporation rate of falling raindrops during precipitation in the Qilian Mountains of China.Below-cloud evaporation contributed to a noticeable enrichment of stable isotopes in the precipitation in the study area.The monthly precipitationδ^(18)O enrichment rate in the Qilian Mountains of China from May to October was 29.18%,23.35%,25.60%,22.99%,31.64%,and 14.72%,respectively.For every 1.00%increase in the evaporation rate of raindrops in Qilian Mountains of China,the changes in the concentration of oxygen isotopes from the bottom of the clouds to the ground increased by 0.92‰;however,with an evaporation rate of<5.00%,for every 1.00%increase in the evaporation rate of raindrops the changes in the concentration of oxygen isotopes from the bottom of the clouds to the ground increased by 1.00‰could also be observed.Furthermore,altitude was an important factor affecting below-cloud evaporation in the study area.展开更多
The mesoscale fiber-matrix interfacial transition zone(FM-ITZ) under induced curing pressure plays a key role in the effectiveness of fiber reinforcement and the engineering application of fiber-reinforced cementitiou...The mesoscale fiber-matrix interfacial transition zone(FM-ITZ) under induced curing pressure plays a key role in the effectiveness of fiber reinforcement and the engineering application of fiber-reinforced cementitious composites(FRCCs). This critical review establishes the link among induced curing pressure(i.e., external loading condition), multiphysics processes(i.e., internal governing mechanism), and interface behavior(i.e., material behavior) for FRCC materials through analysis of the state-of-the-art research findings on the FM-ITZ of FRCC materials. The following results are obtained. For the mechanical process, the induced curing pressure changes the stress state and enhances multicracking behavior, which can strengthen the FM-ITZ. For the hydraulic process, the strengthened seepage of the FM-ITZ under induced curing pressure weakens the effective stress and exaggerates the deficiency in water retention capacity between the bulk matrix and the FMITZ. For the thermal process, the induced curing pressure causes a steep temperature gradient in the FM-ITZ and thus influences the temperature evolution and thermally-induced microcracks in the FM-ITZ. For the chemical process, the induced curing pressure enhances hydration kinetics and results in the formation of additional hydration products in the FM-ITZ. Moreover, recommendations are proposed on the basis of findings from this review to facilitate the implementation of fiber reinforcement in cemented paste backfill technology.展开更多
This study aims to clarify the effects of curing regimes and lightweight aggregate(LWA)on the morphology, width and mechanical properties of the interfacial transition zone(ITZ) of ultra-high performance concrete(UHPC...This study aims to clarify the effects of curing regimes and lightweight aggregate(LWA)on the morphology, width and mechanical properties of the interfacial transition zone(ITZ) of ultra-high performance concrete(UHPC), and provide reference for the selection of lightweight ultra-high performance concrete(L-UHPC) curing regimes and the pre-wetting degree LWA. The results show that, under the three curing regimes(standard curing, steam curing and autoclaved curing), LWA is tightly bound to the matrix without obvious boundaries. ITZ width increases with the water absorption of LWA and decreases with increasing curing temperature. The ITZ microhardness is the highest when water absorption is 3%, and the microhardness value is more stable with the distance from LWA. Steam and autoclaved curing increase ITZ microhardness compared to standard curing. As LWA pre-wetting and curing temperatures increase, the degree of hydration at the ITZ increases, generating high-density CSH(HD CSH) and ultra-high-density CSH(UHD CSH), and reducing unhydrated particles in ITZ. ITZ micro-mechanical properties are optimized due to hydration products being denser.展开更多
The ballastless track is nowadays the most popular railway system due to the required low number of maintenance opera-tions and costs,despite the high investment.The gradual change from ballasted to ballastless tracks...The ballastless track is nowadays the most popular railway system due to the required low number of maintenance opera-tions and costs,despite the high investment.The gradual change from ballasted to ballastless tracks has been occurring in Asia,but also in Europe,increasing the number of transition zones.The transition zones are a special area of the railway networks where there is an accelerated process of track degradation,which is a major concern of the railway infrastructure managers.Thus,the accurate prediction of the short-and long-term performance of ballastless tracks in transition zones is an important topic in the current paradigm of building/rehabilitating high-speed lines.This work purposes the development of an advanced 3D model to study the global performance of a ballastless track in an embankment-tunnel transition zone considering the influence of the train speed(220,360,500,and 600 km/h).Moreover,a mitigation measure is also adopted to reduce the stress and displacements levels of the track in the transition.A resilient mat placed in the tunnel and embank-ment aims to soften the transition.The behaviour of the track with the resilient mat is evaluated considering the influence of the train speed,with special attention regarding the critical speed.The used methodology is a novel and hybrid approach that allows including short-term and long-term performance,through the development of a powerful 3D model combined with the implementation of a calibrated empirical permanent deformation model.展开更多
Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectificatio...Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.展开更多
Haloxylon ammodendron, with its tolerance of drought, high temperature, and salt alkali conditions, is one of the main sand-fixing plant species in the oasis-desert transition zone in China. This study used the TDP30(...Haloxylon ammodendron, with its tolerance of drought, high temperature, and salt alkali conditions, is one of the main sand-fixing plant species in the oasis-desert transition zone in China. This study used the TDP30(where TDP is the thermal dissipation probe) to measure hourly and daily variations in the stem sap flow velocity of H. ammodendron at three age-classes(10, 15, and 20 years old,which were denoted as H10, H15, and H20, respectively) in the Minqin oasis-desert transition zone,China, from May through October 2020. By simultaneously monitoring temperature, relative humidity,photosynthetically active radiation, wind speed, net radiation, rainfall, and soil moisture in this region, we comprehensively investigated the stem sap flow velocity of different-aged H. ammodendron plants(H10,H15, and H20) and revealed its response to physical factors. The results showed that, on sunny days, the hourly variation curves of the stem sap flow velocity of H. ammodendron plants at the three age-classes were mainly unimodal. In addition, the stem sap flow velocity of H. ammodendron plants decreased significantly from September to October, which also delayed its peak time of hourly variation. On rainy days, the stem sap flow velocity of H. ammodendron plants was multimodal and significantly lower than that on sunny days.Average daily water consumption of H. ammodendron plants at H10, H15, and H20 was 1.98, 2.82, and 1.91kg/d, respectively. Temperature was the key factor affecting the stem sap flow velocity of H. ammodendron at all age-classes. Net radiation was the critical factor influencing the stem sap flow velocity of H.ammodendron at H10 and H15;however, for that at H20, it was vapor pressure deficit. The stem sap flow velocity of H. ammodendron was highly significantly correlated with soil moisture at the soil depths of 50and 100 cm, and the correlation was strengthened with increasing stand age. Altogether, our results revealed the dynamic changes of the stem sap flow velocity in different-aged H. ammodendron forest stands and its response mechanism to local physical factors, which provided a theoretical basis for the construction of new protective forests as well as the restoration and protection of existing ones in this region and other similar arid regions in the world.展开更多
The welding interface is crucial to the service safety of dissimilar metal weld(DMW)joints between stainless steel(SS)and low alloy(LA)steel.Different status of welding interfaces was prepared by cladding SS consumabl...The welding interface is crucial to the service safety of dissimilar metal weld(DMW)joints between stainless steel(SS)and low alloy(LA)steel.Different status of welding interfaces was prepared by cladding SS consumables to LA steel substrates with different heat inputs via tungsten inert gas arc welding(TIG),followed by a series of microstructural characterizations and hardness tests.Results showed that a hardening and transition layer(TL)would be generated along the welding interface,and the width and hardening degree of the TL would increase with the heat input.Meanwhile,heavy load hardness tests showed that highly severe inhomogeneous plastic deformation and the microcrack would be generated in the interfacial region and the welding interface respectively in the highest heat input sample(1.03 kJ/mm).These results indicate that the increase in heat input would deteriorate the bonding performance of DMW joints.Further microstructural observations showed that the higher hardening degree of the highest heat input sample was mainly attributed to the stronger grain boundary,solution,and dislocation strengthening effects.展开更多
This study was designed to investigate the different involvements of prostatic stromal cells from the normal transitional zone(TZ)or peripheral zone(PZ)in the carcinogenesis of prostate cancer(PCa)epithelial cells(PC-...This study was designed to investigate the different involvements of prostatic stromal cells from the normal transitional zone(TZ)or peripheral zone(PZ)in the carcinogenesis of prostate cancer(PCa)epithelial cells(PC-3)in vitro and in vivo co-culture models.Ultra-structures and gene expression profiles of primary cultures of human prostatic stromal cells from the normal TZ or PZ were analyzed by electron microscopy and microarray analysis.In vitro and in vivo co-culture models composed of normal TZ or PZ stromal cells and human PCa PC-3 cells were established.We assessed tumor growth and weight in the in vivo nude mice model.There are morphological and ultra-structural differences in stromal cells from TZ and PZ of the normal prostate.In all,514 differentially expressed genes were selected by microarray analysis;483 genes were more highly expressed in stromal cells from TZ and 31 were more highly expressed in those from PZ.Co-culture with PZ stromal cells and transforming growth factor-β1(TGF-β1)increased the tumor growth of PC-3 cells in vitro and in vivo,as well as Bcl-2 expression.On the other hand,stromal cells of TZ suppressed PC-3 cell tumor growth in the mouse model.We conclude that ultra-structures and gene expression differ between the stromal cells from TZ or PZ of the normal prostate,and stroma-epithelium interactions from TZ or PZ might be responsible for the distinct zonal localization of prostate tumor formation.展开更多
In order to facilitate the development and application of air entraining agents(AEA) in the high performance concrete, entrained air void structure parameters(air void size range from 10 to 1 600 μm) of 28 d sifted m...In order to facilitate the development and application of air entraining agents(AEA) in the high performance concrete, entrained air void structure parameters(air void size range from 10 to 1 600 μm) of 28 d sifted mortar were measured by image analysis method. The relationship between the air void size distribution and strength of mortar was studied by methods of grey connection analysis and multiple linear regression analysis. The multiple linear regression equation was established with a correlation coefficient of 0.966. The weight of the affection of hierarchical porosity on the compressive strength ratio was also obtained. In addition, the effect of air voids on the paste-aggregate interfacial transition zone(ITZ) was analyzed by microhardness. The results show that the correlation between different pore size range and the compressive strength is negative. The effect of air void size distribution on 28 days compressive strength is different: under the condition of similar total porosity, with the increase of the porosity of the air void size, ranging from 10 to 200 μm, and the decrease of the porosity, ranging from 200 to 1 600 μm, the average air void diameter and mean free spacing are decreased; as well as the width of ITZ. On the contrary, the microhardness of the ITZ is increased while the compressive strength loss is decreased.展开更多
Magnetic resonance (MR) imaging has been increasingly used in the evaluation of prostate cancer. As studies have suggested that the majority of cancers arise from the peripheral zone (PZ), MR imaging has focused on th...Magnetic resonance (MR) imaging has been increasingly used in the evaluation of prostate cancer. As studies have suggested that the majority of cancers arise from the peripheral zone (PZ), MR imaging has focused on the PZ of the prostate gland thus far. However, a considerable number of cancers (up to 30%) originate in the transition zone (TZ), substantially contributing to morbidity and mortality. Therefore, research is needed on the TZ of the prostate gland. Recently, MR imaging and advanced MR techniques have been gaining acceptance in evaluation of the TZ. In this article, the MR imaging features of TZ prostate cancers, the role of MR imaging in TZ cancer detection and staging, and recent advanced MR techniques will be discussed in light of the literature.展开更多
The interface morphologies and microstruetures of the directionally solidified Ni-5wt-% Cualloy during dendrite-to-cell transition at high growth rates have been investigated with anewly developed apparatus for unidir...The interface morphologies and microstruetures of the directionally solidified Ni-5wt-% Cualloy during dendrite-to-cell transition at high growth rates have been investigated with anewly developed apparatus for unidirectional solidification with the temperature gradient atthe solid/liquid interface higher than 1000 K/cm.The results show that in the vicinity ofdendrite-to-cell transition point,the well developed sidebranches become shrivelled with theincrease of growth rate and disappear at the dendrite-to-cell transition,and the primaryspacing decreases simultaneously.Moreover,the length of mushy zone decreases greatly dur-ing the dendrite-to-cell transition.Cells obtained at high growth rates have very similarmorphologies to those at low growth rates,but with much smaller cell spacings andunsmoothed cell walls which may be attributed to the different stability conditions of the cellwalls at low and high growth rates respectively.展开更多
This paper reports the results of the visual observations and micro-analysis of concrete core samples after 6 and 12 months of their exposure to sodium, ammonium and magnesium sulfate solutions with the same concentra...This paper reports the results of the visual observations and micro-analysis of concrete core samples after 6 and 12 months of their exposure to sodium, ammonium and magnesium sulfate solutions with the same concentration of sulfate ions. XRD, SEM and EDS were used for micro-analysis of the microstructure and the composition of the interface zone in the samples. The results indicate that the deterioration of concrete by different sulfate solutions could proceed differently with regard to the mechanism and the mode of damage caused. The damage of concrete exposed to sodium sulfate solution is mainly caused by the gypsum crystals formed in the interface zone, which lead to expansion and cracking. In the case of concrete immersed in magnesium sulfate solutions, a layer of brucite (magnesium hydroxide) and gypsum was produced in the interface zone, which reduces the cohesiveness of the interface zone in concrete. For the concrete immersed in ammonium sulfate solutions, the conversation of mortar to some mush mass by ammonium ions and the formation of a large of gypsum occurred in the interface zone, consequently, serious softening of hydrated cement pastes and expansion and cracking of concrete are the characteristics of the attack by ammonium sulfate solutions. Also, it is considered that using drilled concrete core as samples to evaluate the sulfate resistance of concrete is a good and accelerated method.展开更多
Body waves retrieved from ambient noise cross-correlation functions(NCFs) have been reported by more and more recent studies in addition to the dominant recovered surface waves. And one of important applications of th...Body waves retrieved from ambient noise cross-correlation functions(NCFs) have been reported by more and more recent studies in addition to the dominant recovered surface waves. And one of important applications of these recovered body waves is to investigate the structure of discontinuities within the mantle transition zone(MTZ). In this study, clear body wave phases reflected from the MTZ discontinuities at 410 km and 660 km have been observed on the NCFs in the frequency band of 0.1–0.2 Hz from a dense regional seismic array in southwest China. The original timedomain reflected signals in the NCFs were first converted to the depth-domain NCFs based on a velocity model before they were further stacked spatially within different bins. Then the depth-domain NCFs were stacked to investigate the lateral variations of the MTZ discontinuities, that is, the 410-km and 660-km discontinuities. Our results exhibit a simple and lateral coherent P_(410) P phase and a much more complicated P_(660) P phase along two profiles, which are in good agreement with mineralogical prediction and recent receiver function studies in the same area. This interferometric method can provide stable reflected body wave phases mainly in the frequency band 0.1–0.2 Hz due to the secondary microseism noise, which can be potentially used for high-resolution mantle interface imaging. This approach is also a good complement to traditional imaging methods, such as receiver function imaging.展开更多
This study deals with complexity, frequency spectrum and velocity model of the crust-mantle transitional zone in different tectonic units along the northeast margin of Qinghai-Xizang plateau, based on PmP waveform dat...This study deals with complexity, frequency spectrum and velocity model of the crust-mantle transitional zone in different tectonic units along the northeast margin of Qinghai-Xizang plateau, based on PmP waveform data from two deep seismic sounding profiles passing through the area. It reveals that Moho has stable tectonic features in Ordos and Lingzhong basins, where crust and mantle are coupled as first-order discontinuity. Moho shows obvious signs of activity in Haiyuan seismic region and in the contact zone between Bayanhar block and Qaidam block.Crust and mantle in these two areas are coupled as complicated crust-mantle transitional zone consisting of multiple laminae with alternate high and low velocities, totaling 20 km in thickness. The difference between Moho of different tectonic units reflects heterogeneity of the coupled crust-mantle zone; the difference between fine structures of Haiyuan seismic region and Maqin fault zone reflects different deep material composition of the two continent-continent collision zones and the interaction between blocks.展开更多
As the position of the transition zone changes obviously, that is, as the transition zone migrates to thenorth or the south from present position, it affects water or heat balance between the land and the atmosphere i...As the position of the transition zone changes obviously, that is, as the transition zone migrates to thenorth or the south from present position, it affects water or heat balance between the land and the atmosphere in a considerable degree and has a profound influence on climate in North China. The experiment results in this paper indicate whether in the dry case or in the wet case of the large-scale climatological background field, the surface air temperature in a wide range of the transition zone migration and its surrounding decreases as the transition zone migrates northward. Moreover, the net upward fluxes of the surface long wave l.adiation and the sensible heat decrease, and the evaporation to the atmosphere increases. Asthe transition zone migrates southward, the results are opPOsite. This kind of significant thermal forcing between the land and the atmosphere can excite secondary circulation or circulation cells, which interact withthe large-scale circulation systems, changing the atmospheric motion, affecting the water vapor transPOrtation and consequently having an effect on the precipitation.展开更多
The Qinling Mountains has always been regarded as an essential dividing line between the warm temperate zone and the subtropical zone in eastern China and plays a vital role in the geoecological pattern of China.Howev...The Qinling Mountains has always been regarded as an essential dividing line between the warm temperate zone and the subtropical zone in eastern China and plays a vital role in the geoecological pattern of China.However,there is controversy about the specific location of this geographical boundary in the academic community.As a product of the combined effects of zonal and non-zonal factors,the mountain altitudinal belts(MABs)can reflect both the horizontal zonality and the vertical zonality of vegetation distribution.Using the MAB information,we can not only profoundly understand the complex mountain system of QinlingDaba Mountains but can also judge its nature as a geographical boundary more scientifically.Therefore,based on the comparative analysis of basal belt,dominant belt characteristics and belt structure characteristics of the MABs in Qinling-Daba Mountains,subtropical and temperate mountains,this paper analyzed the MAB differences and similarities among Qinling-Daba Mountains,subtropical and temperate typical mountains,to reveal the vegetation distribution characteristics in the north-south transitional zone.The results show that:(1)The MABs of the southern part of QinlingDaba Mountains(southern slope of the Daba Mountains)are the same or similar to those of the Subtropical Mountains,and the MABs of the northern part of Qinling-Daba Mountains(northern slope of the Qinling Mountains)are similar to those of the temperate mountains.While it shows obvious transitional characteristics in the vast area between the northern slope of the Daba Mountains and the southern slope of the Qinling Mountains:the basal belts gradually transit from the evergreen broadleaved forest belt(basal belt in subtropical mountains)to the evergreen and deciduous broad-leaved mixed forest belt,and the dominant belts also transit from the evergreen broad-leaved forest belt to the evergreen and deciduous broad-leaved mixed forest belt or the deciduous broad-leaved forest belt.(2)The transitional zone between the subtropical zone and the warm temperate zone is located between the northern slope of the Daba Mountains and the southern slope of the Qinling Mountains.The southern boundary of the transitional zone is along the northern slope of Shennongjia Mountain-the northern slope of Micang Mountain-Baishuijiang Nature Reserve,and the northern boundary is along the southern slope of Funiu Mountain-the southern slope of Taibai Mountain-Lianhua Mountain.Additionally,in the transitional zone,the average temperature in January is between-5°C and 1°C,the annual average temperature is between 10°C and 13°C except Hanzhong Basin and Hanshui Valley,and the accumulated temperature above 10°C ranges from 2000°C to 4000°C,the annual rainfall is about 800-1000 mm.The results provide a scientific basis for revealing the characteristics of China’s north-south transitional zone and scientific division of the boundary between the subtropical zone and warm temperate zone in China.展开更多
The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete unders...The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete understanding and a quantitative modeling of ITZ are still lacking. Consequently, an integrated modeling and experimental study were conducted. First, the theoretical calculation model of the ITZ volume fraction about the rotary ellipsoidal aggregate particles was established based on the nearest surface function formula. Its calculation programs were written based on Visual Basic 6.0 language and achieved visualization and functionalization. Then, the influencing factors of ITZ volume fraction of the ellipsoidal aggregate particles and the overlapping degree between the ITZ were systematically analyzed. Finally, the calculation models of ITZ volume fraction on actual ellipsoidal aggregate were given, based on cobblestones or pebbles particles with naturally ellipsoidal shape. The results indicate that the calculation model proposed is highly reliable.展开更多
This study sought to assess the challenges and opportunities that come with climate change and variability impacts on maize farming in the Nkoranza South Municipality in the Transitional Zone of Ghana. The mixed metho...This study sought to assess the challenges and opportunities that come with climate change and variability impacts on maize farming in the Nkoranza South Municipality in the Transitional Zone of Ghana. The mixed method approach (qualitative and quantitative) was used in collecting the data. Rainfall data obtained from the Ghana Meteorological Agency (GMet) indicated that the dry cell between the major and minor rainy seasons was getting wetter and the two seasons were gradually merging whereas the first and last quarters of the year were getting drier over the last couple of decades. The situation over the last five years (2010-2015) had worsened as the amount of total rainfall had reduced by 22% compared to the 30 year period between 1960 and 1982. The results of the study showed that farmers had perceived changes in climate in the form of decreasing rainfall, rising air temperatures and seasonal changes in rainfall pattern which were affecting their maize farming operations. The major setbacks within the area were deficit in rainy days and intermittent erratic rainfall affecting maize production. The major opportunity available to farmers in the face of changing climate in this agroecological zone was cashew production. About 76.8% of the respondents had diversified into cashew farming as a result of rainfall failure and strong resistance of the cashew trees to changing and variable climate.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.41772333)the National Natural Science Foundation of Shaanxi Province, China (Grant No.2018JQ5124)the New-Star Talents Promotion Project of Science and Technology of Shaanxi Province, China (Grant No.2019KJXX049)。
文摘The sufficient bond between concrete and rock is an important prerequisite to ensure the effect of shotcrete support. However, in cold regions engineering protection system, the bond condition of rock and concrete surface is easily affected by freeze-thaw cycles, resulting in interface damage, debonding and even supporting failure. Understanding the micromechanisms of the damage and debonding of the rock-concrete interface is essential for improving the interface protection.Therefore, the micromorphology, micromechanical properties, and microdebonding evolution of the sandstone-concrete interface transition zone(ITZ) under varying freeze-thaw cycles(0, 5, 10, 15, 20) were studied using scanning electron microscope, stereoscopic microscope, and nano-indentation. Furthermore, the distribution range and evolution process of ITZ affected by freeze-thaw cycles were defined. Major findings of this study are as follows:(1) The microdamage evolution law of the ITZ under increasing freeze-thaw cycles is clarified, and the relationship between the number of cracks in the ITZ and freeze-thaw cycles is established;(2) As the number of freeze-thaw cycles increases, the ITZ's micromechanical strength decreases, and its development width tends to increase;(3) The damage and debonding evolution mechanisms of sandstone-concrete ITZ under freeze-thaw cycles is revealed, and its micromechanical evolution model induced by freeze-thaw cycles is proposed.
基金Under the auspices of the Joint Funds of the National Natural Science Foundation of China(No.U22A20592)the National Key Research and Development Program of China(No.2020YFA0607702)+2 种基金the Second Tibetan Plateau Scientific Expedition and Research Program(No.2019QZKK0405)Chinese Academy of Sciences Young Crossover Team Project(No.JCTD-2022-18)Excellent doctoral program in Gansu Province(No.22JR5RA052)。
文摘Consideration of stable isotopes in precipitation is valuable for investigating hydrological processes.Therefore,correcting the measured isotopic composition of precipitation under below-cloud evaporation is necessary.An accurate description of the underlying processes affecting stable isotopic composition of precipitation could help improve our understanding of the water cycle.The transitivity between monsoonal and arid climates was reflected by the evaporation rate of falling raindrops in precipitation in the Qilian Mountains,a typical transition zone between Tibetan Plateau and arid region of China.Considering 1310 precipitation event-scale samples,based on stable isotope analysis method,the mean below-cloud evaporation rate(f)in the study area was measured as 12.00%during the summer half-year(May-October).The evaporation rate on the northern slopes(12.70%)of the Qilian Mountains in China was significantly higher than that on the southern slopes(9.98%).The transition between monsoonal and arid climates was reflected in the evaporation rate of falling raindrops during precipitation in the Qilian Mountains of China.Below-cloud evaporation contributed to a noticeable enrichment of stable isotopes in the precipitation in the study area.The monthly precipitationδ^(18)O enrichment rate in the Qilian Mountains of China from May to October was 29.18%,23.35%,25.60%,22.99%,31.64%,and 14.72%,respectively.For every 1.00%increase in the evaporation rate of raindrops in Qilian Mountains of China,the changes in the concentration of oxygen isotopes from the bottom of the clouds to the ground increased by 0.92‰;however,with an evaporation rate of<5.00%,for every 1.00%increase in the evaporation rate of raindrops the changes in the concentration of oxygen isotopes from the bottom of the clouds to the ground increased by 1.00‰could also be observed.Furthermore,altitude was an important factor affecting below-cloud evaporation in the study area.
基金the Natural Sciences and Engineering Research Council of Canada (NSERC)Lakehead University for their financial support。
文摘The mesoscale fiber-matrix interfacial transition zone(FM-ITZ) under induced curing pressure plays a key role in the effectiveness of fiber reinforcement and the engineering application of fiber-reinforced cementitious composites(FRCCs). This critical review establishes the link among induced curing pressure(i.e., external loading condition), multiphysics processes(i.e., internal governing mechanism), and interface behavior(i.e., material behavior) for FRCC materials through analysis of the state-of-the-art research findings on the FM-ITZ of FRCC materials. The following results are obtained. For the mechanical process, the induced curing pressure changes the stress state and enhances multicracking behavior, which can strengthen the FM-ITZ. For the hydraulic process, the strengthened seepage of the FM-ITZ under induced curing pressure weakens the effective stress and exaggerates the deficiency in water retention capacity between the bulk matrix and the FMITZ. For the thermal process, the induced curing pressure causes a steep temperature gradient in the FM-ITZ and thus influences the temperature evolution and thermally-induced microcracks in the FM-ITZ. For the chemical process, the induced curing pressure enhances hydration kinetics and results in the formation of additional hydration products in the FM-ITZ. Moreover, recommendations are proposed on the basis of findings from this review to facilitate the implementation of fiber reinforcement in cemented paste backfill technology.
基金Funded by the National Natural Science Foundation of China (Nos.U21A20149, 51878003, 51908378)Research Reserve of Anhui Jianzhu University (No.2022XMK01)Excellent Scientific Research and Innovation Team in Colleges and Universities of Anhui Province(No. 2022AH010017)。
文摘This study aims to clarify the effects of curing regimes and lightweight aggregate(LWA)on the morphology, width and mechanical properties of the interfacial transition zone(ITZ) of ultra-high performance concrete(UHPC), and provide reference for the selection of lightweight ultra-high performance concrete(L-UHPC) curing regimes and the pre-wetting degree LWA. The results show that, under the three curing regimes(standard curing, steam curing and autoclaved curing), LWA is tightly bound to the matrix without obvious boundaries. ITZ width increases with the water absorption of LWA and decreases with increasing curing temperature. The ITZ microhardness is the highest when water absorption is 3%, and the microhardness value is more stable with the distance from LWA. Steam and autoclaved curing increase ITZ microhardness compared to standard curing. As LWA pre-wetting and curing temperatures increase, the degree of hydration at the ITZ increases, generating high-density CSH(HD CSH) and ultra-high-density CSH(UHD CSH), and reducing unhydrated particles in ITZ. ITZ micro-mechanical properties are optimized due to hydration products being denser.
基金financed by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UIDB/04029/2020 financially supported by: Base Funding-UIDB/04708/2020 of the CONSTRUCT-Institute of R&D in Structures and Construction-national funds through the FCT/ MCTES (PIDDAC)
文摘The ballastless track is nowadays the most popular railway system due to the required low number of maintenance opera-tions and costs,despite the high investment.The gradual change from ballasted to ballastless tracks has been occurring in Asia,but also in Europe,increasing the number of transition zones.The transition zones are a special area of the railway networks where there is an accelerated process of track degradation,which is a major concern of the railway infrastructure managers.Thus,the accurate prediction of the short-and long-term performance of ballastless tracks in transition zones is an important topic in the current paradigm of building/rehabilitating high-speed lines.This work purposes the development of an advanced 3D model to study the global performance of a ballastless track in an embankment-tunnel transition zone considering the influence of the train speed(220,360,500,and 600 km/h).Moreover,a mitigation measure is also adopted to reduce the stress and displacements levels of the track in the transition.A resilient mat placed in the tunnel and embank-ment aims to soften the transition.The behaviour of the track with the resilient mat is evaluated considering the influence of the train speed,with special attention regarding the critical speed.The used methodology is a novel and hybrid approach that allows including short-term and long-term performance,through the development of a powerful 3D model combined with the implementation of a calibrated empirical permanent deformation model.
基金the National Natural Science Foundation of China(Grant No.51976002)the Beijing Nova Program of Science and Technology(Grant No.Z191100001119033)。
文摘Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.
基金supported by the National Natural Science Foundation of China Subsidization Project (32260425, 31860238)the Natural Science Foundation of Gansu Province, China (32060246, 21JR7RA733)。
文摘Haloxylon ammodendron, with its tolerance of drought, high temperature, and salt alkali conditions, is one of the main sand-fixing plant species in the oasis-desert transition zone in China. This study used the TDP30(where TDP is the thermal dissipation probe) to measure hourly and daily variations in the stem sap flow velocity of H. ammodendron at three age-classes(10, 15, and 20 years old,which were denoted as H10, H15, and H20, respectively) in the Minqin oasis-desert transition zone,China, from May through October 2020. By simultaneously monitoring temperature, relative humidity,photosynthetically active radiation, wind speed, net radiation, rainfall, and soil moisture in this region, we comprehensively investigated the stem sap flow velocity of different-aged H. ammodendron plants(H10,H15, and H20) and revealed its response to physical factors. The results showed that, on sunny days, the hourly variation curves of the stem sap flow velocity of H. ammodendron plants at the three age-classes were mainly unimodal. In addition, the stem sap flow velocity of H. ammodendron plants decreased significantly from September to October, which also delayed its peak time of hourly variation. On rainy days, the stem sap flow velocity of H. ammodendron plants was multimodal and significantly lower than that on sunny days.Average daily water consumption of H. ammodendron plants at H10, H15, and H20 was 1.98, 2.82, and 1.91kg/d, respectively. Temperature was the key factor affecting the stem sap flow velocity of H. ammodendron at all age-classes. Net radiation was the critical factor influencing the stem sap flow velocity of H.ammodendron at H10 and H15;however, for that at H20, it was vapor pressure deficit. The stem sap flow velocity of H. ammodendron was highly significantly correlated with soil moisture at the soil depths of 50and 100 cm, and the correlation was strengthened with increasing stand age. Altogether, our results revealed the dynamic changes of the stem sap flow velocity in different-aged H. ammodendron forest stands and its response mechanism to local physical factors, which provided a theoretical basis for the construction of new protective forests as well as the restoration and protection of existing ones in this region and other similar arid regions in the world.
文摘The welding interface is crucial to the service safety of dissimilar metal weld(DMW)joints between stainless steel(SS)and low alloy(LA)steel.Different status of welding interfaces was prepared by cladding SS consumables to LA steel substrates with different heat inputs via tungsten inert gas arc welding(TIG),followed by a series of microstructural characterizations and hardness tests.Results showed that a hardening and transition layer(TL)would be generated along the welding interface,and the width and hardening degree of the TL would increase with the heat input.Meanwhile,heavy load hardness tests showed that highly severe inhomogeneous plastic deformation and the microcrack would be generated in the interfacial region and the welding interface respectively in the highest heat input sample(1.03 kJ/mm).These results indicate that the increase in heat input would deteriorate the bonding performance of DMW joints.Further microstructural observations showed that the higher hardening degree of the highest heat input sample was mainly attributed to the stronger grain boundary,solution,and dislocation strengthening effects.
基金the National Natural Science Foundation of China(No.30672109).
文摘This study was designed to investigate the different involvements of prostatic stromal cells from the normal transitional zone(TZ)or peripheral zone(PZ)in the carcinogenesis of prostate cancer(PCa)epithelial cells(PC-3)in vitro and in vivo co-culture models.Ultra-structures and gene expression profiles of primary cultures of human prostatic stromal cells from the normal TZ or PZ were analyzed by electron microscopy and microarray analysis.In vitro and in vivo co-culture models composed of normal TZ or PZ stromal cells and human PCa PC-3 cells were established.We assessed tumor growth and weight in the in vivo nude mice model.There are morphological and ultra-structural differences in stromal cells from TZ and PZ of the normal prostate.In all,514 differentially expressed genes were selected by microarray analysis;483 genes were more highly expressed in stromal cells from TZ and 31 were more highly expressed in those from PZ.Co-culture with PZ stromal cells and transforming growth factor-β1(TGF-β1)increased the tumor growth of PC-3 cells in vitro and in vivo,as well as Bcl-2 expression.On the other hand,stromal cells of TZ suppressed PC-3 cell tumor growth in the mouse model.We conclude that ultra-structures and gene expression differ between the stromal cells from TZ or PZ of the normal prostate,and stroma-epithelium interactions from TZ or PZ might be responsible for the distinct zonal localization of prostate tumor formation.
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2009CB623100)the National Natural Science Foundation of China(No.51378391)
文摘In order to facilitate the development and application of air entraining agents(AEA) in the high performance concrete, entrained air void structure parameters(air void size range from 10 to 1 600 μm) of 28 d sifted mortar were measured by image analysis method. The relationship between the air void size distribution and strength of mortar was studied by methods of grey connection analysis and multiple linear regression analysis. The multiple linear regression equation was established with a correlation coefficient of 0.966. The weight of the affection of hierarchical porosity on the compressive strength ratio was also obtained. In addition, the effect of air voids on the paste-aggregate interfacial transition zone(ITZ) was analyzed by microhardness. The results show that the correlation between different pore size range and the compressive strength is negative. The effect of air void size distribution on 28 days compressive strength is different: under the condition of similar total porosity, with the increase of the porosity of the air void size, ranging from 10 to 200 μm, and the decrease of the porosity, ranging from 200 to 1 600 μm, the average air void diameter and mean free spacing are decreased; as well as the width of ITZ. On the contrary, the microhardness of the ITZ is increased while the compressive strength loss is decreased.
文摘Magnetic resonance (MR) imaging has been increasingly used in the evaluation of prostate cancer. As studies have suggested that the majority of cancers arise from the peripheral zone (PZ), MR imaging has focused on the PZ of the prostate gland thus far. However, a considerable number of cancers (up to 30%) originate in the transition zone (TZ), substantially contributing to morbidity and mortality. Therefore, research is needed on the TZ of the prostate gland. Recently, MR imaging and advanced MR techniques have been gaining acceptance in evaluation of the TZ. In this article, the MR imaging features of TZ prostate cancers, the role of MR imaging in TZ cancer detection and staging, and recent advanced MR techniques will be discussed in light of the literature.
文摘The interface morphologies and microstruetures of the directionally solidified Ni-5wt-% Cualloy during dendrite-to-cell transition at high growth rates have been investigated with anewly developed apparatus for unidirectional solidification with the temperature gradient atthe solid/liquid interface higher than 1000 K/cm.The results show that in the vicinity ofdendrite-to-cell transition point,the well developed sidebranches become shrivelled with theincrease of growth rate and disappear at the dendrite-to-cell transition,and the primaryspacing decreases simultaneously.Moreover,the length of mushy zone decreases greatly dur-ing the dendrite-to-cell transition.Cells obtained at high growth rates have very similarmorphologies to those at low growth rates,but with much smaller cell spacings andunsmoothed cell walls which may be attributed to the different stability conditions of the cellwalls at low and high growth rates respectively.
基金Funded by the Natural Science Foundation of China (No. 50378092)
文摘This paper reports the results of the visual observations and micro-analysis of concrete core samples after 6 and 12 months of their exposure to sodium, ammonium and magnesium sulfate solutions with the same concentration of sulfate ions. XRD, SEM and EDS were used for micro-analysis of the microstructure and the composition of the interface zone in the samples. The results indicate that the deterioration of concrete by different sulfate solutions could proceed differently with regard to the mechanism and the mode of damage caused. The damage of concrete exposed to sodium sulfate solution is mainly caused by the gypsum crystals formed in the interface zone, which lead to expansion and cracking. In the case of concrete immersed in magnesium sulfate solutions, a layer of brucite (magnesium hydroxide) and gypsum was produced in the interface zone, which reduces the cohesiveness of the interface zone in concrete. For the concrete immersed in ammonium sulfate solutions, the conversation of mortar to some mush mass by ammonium ions and the formation of a large of gypsum occurred in the interface zone, consequently, serious softening of hydrated cement pastes and expansion and cracking of concrete are the characteristics of the attack by ammonium sulfate solutions. Also, it is considered that using drilled concrete core as samples to evaluate the sulfate resistance of concrete is a good and accelerated method.
基金supported by China Earthquake Science Experiment Project,China Earthquake Administration(Nos.2017CESE0101 and 2016CESE0201)the National Natural Science Foundation of China(No.41574034)
文摘Body waves retrieved from ambient noise cross-correlation functions(NCFs) have been reported by more and more recent studies in addition to the dominant recovered surface waves. And one of important applications of these recovered body waves is to investigate the structure of discontinuities within the mantle transition zone(MTZ). In this study, clear body wave phases reflected from the MTZ discontinuities at 410 km and 660 km have been observed on the NCFs in the frequency band of 0.1–0.2 Hz from a dense regional seismic array in southwest China. The original timedomain reflected signals in the NCFs were first converted to the depth-domain NCFs based on a velocity model before they were further stacked spatially within different bins. Then the depth-domain NCFs were stacked to investigate the lateral variations of the MTZ discontinuities, that is, the 410-km and 660-km discontinuities. Our results exhibit a simple and lateral coherent P_(410) P phase and a much more complicated P_(660) P phase along two profiles, which are in good agreement with mineralogical prediction and recent receiver function studies in the same area. This interferometric method can provide stable reflected body wave phases mainly in the frequency band 0.1–0.2 Hz due to the secondary microseism noise, which can be potentially used for high-resolution mantle interface imaging. This approach is also a good complement to traditional imaging methods, such as receiver function imaging.
基金Chinese Joint Seismological Science Foundation (102025, 104027).Contribution No. RCEG200210, Geophysical Exploration Center, China Earthquake Administration.
文摘This study deals with complexity, frequency spectrum and velocity model of the crust-mantle transitional zone in different tectonic units along the northeast margin of Qinghai-Xizang plateau, based on PmP waveform data from two deep seismic sounding profiles passing through the area. It reveals that Moho has stable tectonic features in Ordos and Lingzhong basins, where crust and mantle are coupled as first-order discontinuity. Moho shows obvious signs of activity in Haiyuan seismic region and in the contact zone between Bayanhar block and Qaidam block.Crust and mantle in these two areas are coupled as complicated crust-mantle transitional zone consisting of multiple laminae with alternate high and low velocities, totaling 20 km in thickness. The difference between Moho of different tectonic units reflects heterogeneity of the coupled crust-mantle zone; the difference between fine structures of Haiyuan seismic region and Maqin fault zone reflects different deep material composition of the two continent-continent collision zones and the interaction between blocks.
文摘As the position of the transition zone changes obviously, that is, as the transition zone migrates to thenorth or the south from present position, it affects water or heat balance between the land and the atmosphere in a considerable degree and has a profound influence on climate in North China. The experiment results in this paper indicate whether in the dry case or in the wet case of the large-scale climatological background field, the surface air temperature in a wide range of the transition zone migration and its surrounding decreases as the transition zone migrates northward. Moreover, the net upward fluxes of the surface long wave l.adiation and the sensible heat decrease, and the evaporation to the atmosphere increases. Asthe transition zone migrates southward, the results are opPOsite. This kind of significant thermal forcing between the land and the atmosphere can excite secondary circulation or circulation cells, which interact withthe large-scale circulation systems, changing the atmospheric motion, affecting the water vapor transPOrtation and consequently having an effect on the precipitation.
基金funded by the Natural Science Foundation of China(Grant No.41871350)Scientific and Technological Basic Resources Survey Project(Grant No.2017FY100900)。
文摘The Qinling Mountains has always been regarded as an essential dividing line between the warm temperate zone and the subtropical zone in eastern China and plays a vital role in the geoecological pattern of China.However,there is controversy about the specific location of this geographical boundary in the academic community.As a product of the combined effects of zonal and non-zonal factors,the mountain altitudinal belts(MABs)can reflect both the horizontal zonality and the vertical zonality of vegetation distribution.Using the MAB information,we can not only profoundly understand the complex mountain system of QinlingDaba Mountains but can also judge its nature as a geographical boundary more scientifically.Therefore,based on the comparative analysis of basal belt,dominant belt characteristics and belt structure characteristics of the MABs in Qinling-Daba Mountains,subtropical and temperate mountains,this paper analyzed the MAB differences and similarities among Qinling-Daba Mountains,subtropical and temperate typical mountains,to reveal the vegetation distribution characteristics in the north-south transitional zone.The results show that:(1)The MABs of the southern part of QinlingDaba Mountains(southern slope of the Daba Mountains)are the same or similar to those of the Subtropical Mountains,and the MABs of the northern part of Qinling-Daba Mountains(northern slope of the Qinling Mountains)are similar to those of the temperate mountains.While it shows obvious transitional characteristics in the vast area between the northern slope of the Daba Mountains and the southern slope of the Qinling Mountains:the basal belts gradually transit from the evergreen broadleaved forest belt(basal belt in subtropical mountains)to the evergreen and deciduous broad-leaved mixed forest belt,and the dominant belts also transit from the evergreen broad-leaved forest belt to the evergreen and deciduous broad-leaved mixed forest belt or the deciduous broad-leaved forest belt.(2)The transitional zone between the subtropical zone and the warm temperate zone is located between the northern slope of the Daba Mountains and the southern slope of the Qinling Mountains.The southern boundary of the transitional zone is along the northern slope of Shennongjia Mountain-the northern slope of Micang Mountain-Baishuijiang Nature Reserve,and the northern boundary is along the southern slope of Funiu Mountain-the southern slope of Taibai Mountain-Lianhua Mountain.Additionally,in the transitional zone,the average temperature in January is between-5°C and 1°C,the annual average temperature is between 10°C and 13°C except Hanzhong Basin and Hanshui Valley,and the accumulated temperature above 10°C ranges from 2000°C to 4000°C,the annual rainfall is about 800-1000 mm.The results provide a scientific basis for revealing the characteristics of China’s north-south transitional zone and scientific division of the boundary between the subtropical zone and warm temperate zone in China.
基金Funded by the National Natural Science Foundations of China(Nos.51478278 and 51408380)the Natural Science Foundation of Hebei Province(No.E2014210149)Higher Education Science and Technology Research Project of Hebei Province(No.ZD2016065)
文摘The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete understanding and a quantitative modeling of ITZ are still lacking. Consequently, an integrated modeling and experimental study were conducted. First, the theoretical calculation model of the ITZ volume fraction about the rotary ellipsoidal aggregate particles was established based on the nearest surface function formula. Its calculation programs were written based on Visual Basic 6.0 language and achieved visualization and functionalization. Then, the influencing factors of ITZ volume fraction of the ellipsoidal aggregate particles and the overlapping degree between the ITZ were systematically analyzed. Finally, the calculation models of ITZ volume fraction on actual ellipsoidal aggregate were given, based on cobblestones or pebbles particles with naturally ellipsoidal shape. The results indicate that the calculation model proposed is highly reliable.
文摘This study sought to assess the challenges and opportunities that come with climate change and variability impacts on maize farming in the Nkoranza South Municipality in the Transitional Zone of Ghana. The mixed method approach (qualitative and quantitative) was used in collecting the data. Rainfall data obtained from the Ghana Meteorological Agency (GMet) indicated that the dry cell between the major and minor rainy seasons was getting wetter and the two seasons were gradually merging whereas the first and last quarters of the year were getting drier over the last couple of decades. The situation over the last five years (2010-2015) had worsened as the amount of total rainfall had reduced by 22% compared to the 30 year period between 1960 and 1982. The results of the study showed that farmers had perceived changes in climate in the form of decreasing rainfall, rising air temperatures and seasonal changes in rainfall pattern which were affecting their maize farming operations. The major setbacks within the area were deficit in rainy days and intermittent erratic rainfall affecting maize production. The major opportunity available to farmers in the face of changing climate in this agroecological zone was cashew production. About 76.8% of the respondents had diversified into cashew farming as a result of rainfall failure and strong resistance of the cashew trees to changing and variable climate.
