The complex distribution of gas hydrate in sediments makes understanding the mechanical properties of hydrate-bearing sediments a challenging task.The mechanical behaviors of hydrate-bearing interlayered sediments are...The complex distribution of gas hydrate in sediments makes understanding the mechanical properties of hydrate-bearing sediments a challenging task.The mechanical behaviors of hydrate-bearing interlayered sediments are still poorly known.A series of triaxial shearing tests were conducted to investigate the strength parameters and deformation properties of methane hydrate-bearing interlayered sediments at the effective pressure of 1 MPa.The results indicate that the stress-strain curves of hydrate-bearing interlayered sediments are significantly different from that of hydrate-bearing sediments.The peak strength,Young's modulus,initial yielding modulus,and failure mode are deeply affected by the methane hydrate distribution.The failure behaviors and mechanism of strain softening and hardening patterns of the interlayered specimens are more complicated than those of the integrated specimens.This study compares the different mechanical behaviors between integrated and interlayered specimens containing gas hydrate,which can serve as a reference for the prediction and analysis of the deformation behaviors of natural gas hydrate reservoirs.展开更多
Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure ...Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure of the materials was studied by an X-ray powder diffractometer and a Fourier transform infrared (FTIR) spectrometer.The results indicated that the basal spacing [d(001) value] of the materials was increased significantly to 1.9194 nm relative to Na-montmorillonite (1.2182 nm).After calcined for 2 h at 300℃,the basal spacing was stabilized at 1.8394 nm and the layered structure of the materials was not destroyed.Thermal analysis was conducted by a thermal gravimetry and differential thermal analysis (TG-DTA) instrument,it showed that Al-PILM lost physically adsorbed water below 230.6℃ and water formed by dehydroxylation of the pillars at around 497.1℃, with a peak of the phase transformation at 903.0℃.展开更多
As the main component of wearable electronic equipment,flexible pressure sensors have attracted wide attention due to their excellent sensitivity and their promise with respect to applications in health monitoring,ele...As the main component of wearable electronic equipment,flexible pressure sensors have attracted wide attention due to their excellent sensitivity and their promise with respect to applications in health monitoring,electronic skin,and human-computer interactions.However,it remains a significant challenge to achieve epidermal sensing over a wide sensing range,with short response/recovery time and featuring seamless conformability to the skin simultaneously.This is critical since the capture of minute electrophysiological signals is important for health care applications.In this paper,we report the preparation of a nacre-like MXene/sodium carboxymethyl cellulose(CMC)nanocomposite film with a“brick-and-mortar”interior structure using a vacuum-induced self-assembly strategy.The synergistic behavior of the MXene“brick”and flexible CMC“mortar”contributes to attenuating interlamellar self-stacking and creates numerous variable conductive pathways on the sensing film.This resulted in a high sensitivity over a broad pressure range(i.e.,0.03-22.37 kPa:162.13 kPa^(-1);22.37-135.71 kPa:127.88 kPa^(-1);135.71-286.49 kPa:100.58 kPa^(-1)).This sensor also has a low detection limit(0.85 Pa),short response/recovery time(8.58 ms/34.34 ms),and good stability(2000 cycles).Furthermore,we deployed pressure sensors to distinguish among tiny particles,various physiological signals of the human body,space arrays,robot motion monitoring,and other related applications to demonstrate their feasibility for a variety of health and motion monitoring use cases.展开更多
TC21 titanium alloy,as an important metal to fabricate the aircraft structural components,has attracted great attentions recently.A TC21 titanium alloy with widmanst?tten structure was isothermally compressed.Based on...TC21 titanium alloy,as an important metal to fabricate the aircraft structural components,has attracted great attentions recently.A TC21 titanium alloy with widmanst?tten structure was isothermally compressed.Based on the microstructure observation,the evolution of initialβgrain,Grain Boundaryαphase(α;),lamellar a and interlayeredβwas systematically investigated.The results showed that,with the increasing of height reduction,theα;underwent an evolution process from bending/kinking to breaking inducing the corresponding blurring of initial coarse b grain outline.Meanwhile,a significant phase transformation from a to b took place at the terminations of brokenα;.The evolution of lamellarαand interlayeredβin the colony was closely related to their deformation compatibility.In the a colony,the interlayered b experienced a larger deformation amount than lamellarα.The higher distortion energy promoted the occurrence of Dynamic Recovery(DRV)and Dynamic Recrystallization(DRX)to generate many Low Angle Boundaries(LABs)and High Angle Boundaries(HABs)in interlayered b,which induced an apparent grain refinement of b phase.On the contrary,the lower distortion energy and low deformation temperature suppressed the occurrence of DRV/DRX and restrained the globularization of lamellarα.Furthermore,the microstructure observation clearly revealed that the shearing separation mechanism dominated the evolution of the a phase from lamellar to short bar-like morphology.展开更多
The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low potential.Nonetheless,the format...The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low potential.Nonetheless,the formation and growth of dendrites seriously compromise battery life and safety.Herein,an yttriastabilized bismuth oxide(YSB) layer is fabricated on the polypropylene(PP) separator,where YSB reacts with Li anode in-situ in the cell to form a multi-component composite interlayer consisting of Li_(3)Bi,Li_(2)O,and Y_(2)O_(3).The interlayer can function not only as a redistributor to regulate Li^(+) distribution but also as an anion adsorber to increase the Li^(+) transference number from 0.37 to 0.79 for suppressing dendrite nucleation and growth.Consequently,compared with the cell with a baseline separator,those with modified separators exhibit prolonged lifespan in both Li/Li symmetrical cells and Li/Cu half-cells.Notably,the full cells coupled with ultrahigh-loading LiFePO_(4) display an excellent cycling performance of 1700 cycles with a high capacity retention of ~80% at 1 C,exhibiting great potential for practical applications.This work provides a feasible and effective new strategy for separator modification towards building a much-anticipated dendrite-free Li anode and realizing long-lifespan lithium metal batteries.展开更多
The development of lithium-sulfur(Li-S)batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and charge.Herein,the...The development of lithium-sulfur(Li-S)batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and charge.Herein,the crystallinities of a titanium nitride(TiN)film on copper-embedded carbon nanofibers(Cu-CNFs)are regulated and the nanofibers are used as interlayers to resolve the aforementioned crucial issues.A low-crystalline TiN-coated Cu-CNF(L-TiN-Cu-CNF)interlayer is compared with its highly crystalline counterpart(H-TiN-Cu-CNFs).It is demonstrated that the L-TiN coating not only strengthens the chemical adsorption toward polysulfides but also greatly accelerates the electrochemical conversion of polysulfides.Due to robust carbon frameworks and enhanced kinetics,impressive highrate performance at 2 C(913 mAh g^(-1)based on sulfur)as well as remarkable cyclic stability up to 300 cycles(626 mAh g^(-1))with capacity retention of 46.5%is realized for L-TiN-Cu-CNF interlayer-configured Li-S batteries.Even under high loading(3.8 mg cm^(-2))of sulfur and relatively lean electrolyte(10μL electrolyte per milligram sulfur)conditions,the Li-S battery equipped with L-TiN-Cu-CNF interlayers delivers a high capacity of 1144 mAh g^(-1)with cathodic capacity of 4.25 mAh cm^(-2)at 0.1 C,providing a potential pathway toward the design of multifunctional interlayers for highly efficient Li-S batteries.展开更多
Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass...Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass loadings crucial for practical use.The root of these challenges lies in the mechanical instability of the material,which subsequently leads to the structural failure of the electrode.Here,we present a novel synthesis of a composite combining expanded graphite and silicon nanoparticles.This composite features a unique interlayer-bonded graphite structure,achieved through the application of a modified spark plasma sintering method.Notably,this innovative structure not only facilitates efficient ion and electron transport but also provides exceptional mechanical strength(Vickers hardness:up to658 MPa,Young's modulus:11.6 GPa).This strength effectively accommodates silicon expansion,resulting in an impressive areal capacity of 2.9 mA h cm^(-2)(736 mA h g^(-1)) and a steady cycle life(93% after 100cycles).Such outsta nding performance is paired with features appropriate for large-scale industrial production of silicon batteries,such as active mass loading of at least 3.9 mg cm^(-2),a high-tap density electrode material of 1.68 g cm^(-3)(secondary clusters:1.12 g cm^(-3)),and a production yield of up to 1 kg per day.展开更多
Based on first-principles calculations, we systematically study the stacking energy and interlayer magnetic interaction of the heterobilayer composed of CrI_(3) and CrSe_(2) monolayers. It is found that the stacking o...Based on first-principles calculations, we systematically study the stacking energy and interlayer magnetic interaction of the heterobilayer composed of CrI_(3) and CrSe_(2) monolayers. It is found that the stacking order plays a crucial role in the interlayer magnetic coupling. Among all possible stacking structures, the AA-stacking is the most stable heterostructure, exhibiting interlayer antiferromagnetic interactions. Interestingly, the interlayer magnetic interaction can be effectively tuned by biaxial strain. A 4.3% compressive strain would result in a ferromagnetic interlayer interaction in all stacking orders. These results reveal the magnetic properties of CrI_(3)/CrSe_(2) heterostructure, which is expected to be applied to spintronic devices.展开更多
The development of high-performance organic solar cells(OSCs)with high operational stability is essential to accelerate their commercialization.Unfortunately,our understanding of the origin of instabilities in state-o...The development of high-performance organic solar cells(OSCs)with high operational stability is essential to accelerate their commercialization.Unfortunately,our understanding of the origin of instabilities in state-of-the-art OSCs based on bulk heterojunction(BHJ)featuring non-fullerene acceptors(NFAs)remains limited.Herein,we developed NFA-based OSCs using different charge extraction interlayer materials and studied their storage,thermal,and operational stabilities.Despite the high power conversion efficiency(PCE)of the OSCs(17.54%),we found that cells featuring self-assembled monolayers(SAMs)as hole-extraction interlayers exhibited poor stability.The time required for these OSCs to reach 80%of their initial performance(T_(80))was only 6h under continuous thermal stress at 85℃in a nitrogen atmosphere and 1 h under maximum power point tracking(MPPT)in a vacuum.Inserting MoO_(x)between ITO and SAM enhanced the T_(80)to 50 and~15 h after the thermal and operational stability tests,respectively,while maintaining a PCE of 16.9%.Replacing the organic PDINN electron transport layer with ZnO NPs further enhances the cells'thermal and operational stability,boosting the T_(80)to 1000 and 170 h,respectively.Our work reveals the synergistic roles of charge-selective interlayers and device architecture in developing efficient and stable OSCs.展开更多
Inverted perovskite solar cells(PSCs) have attracted broad research and industrial interest owing to their suppressed hysteresis,cost-effectiveness,and easy-fabrication.However,the issue of non-radiative recombination...Inverted perovskite solar cells(PSCs) have attracted broad research and industrial interest owing to their suppressed hysteresis,cost-effectiveness,and easy-fabrication.However,the issue of non-radiative recombination losses at the n-type interface between the perovskite and fullerene has impeded further improvement of photovoltaic performance.Here,we modify the n-type interface of FAPbI_(3) perovskite films by constructing a stereochemical two-dimensional(2D) perovskite interlayer,in which the organic cations comprise both pyridine and ammonium groups.The pyridine N donor can create stable bonding with the surface-uncoordinated Pb on the perovskite,thereby passivating the shallow-level defects and enhancing the air stability of the film.Furthermore,the pyridine N donor also offers a positive polar interface to decrease the surface work function of the perovskite film,enabling n-type modification.Ultimately,we employ a p-i-n photovoltaic(PV) device with the positive dipole interlayer at perovskite/fullerene contact and achieve remarkable photoelectric conversion efficiency(PCE) of 22.0%.展开更多
We investigate the peak structure in the interlayer conductance of Moirésuperlattices using a tunneling theory wedeveloped previously.The theoretical results predict that,due to the resonance of two different par...We investigate the peak structure in the interlayer conductance of Moirésuperlattices using a tunneling theory wedeveloped previously.The theoretical results predict that,due to the resonance of two different partial waves,the doublepeakstructure can appear in the curve of the interlayer conductance versus twist angle.Furthermore,we study the influencesof the model parameters,i.e.,the chemical potential of electrodes,the thickness of Moirésuperlattice,and the strength ofinterface potential,on the peak structure of the interlayer conductance.In particular,the parameter dependence of the peakstructure is concluded via a phase diagram,and the physical meanings of the phase diagram is formulized.Finally,thepotential applications of the present work is discussed.展开更多
The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder...The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder their practical implementation.Polymer has been used extensively to improve the cathode-electrolyte interface in garnet-based all-solid-state LIBs(ASSLBs),while it introduces new concerns about thermal stability.In this study,we propose the incorporation of a multi-functional flame-retardant triphenyl phos-phate additive into poly(ethylene oxide),acting as a thin buffer layer between LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode and garnet electro-lyte.Through electrochemical stability tests,cycling performance evaluations,interfacial thermal stability analysis and flammability tests,improved thermal stability(capacity retention of 98.5%after 100 cycles at 60℃,and 89.6%after 50 cycles at 80℃)and safety characteristics(safe and stable cycling up to 100℃)are demonstrated.Based on various materials characterizations,the mechanism for the improved thermal stability of the interface is proposed.The results highlight the potential of multi-functional flame-retardant additives to address the challenges associated with the electrode-electrolyte interface in ASSLBs at high temperature.Efficient thermal modification in ASSLBs operating at elevated temperatures is also essential for enabling large-scale energy storage with safety being the primary concern.展开更多
Moiré superlattices(MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL a...Moiré superlattices(MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges in its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS_(2) MSL as an example, we find prominent properties including large band gap reduction(~ 0.4 e V) and enhanced optical activity. Firstprinciples calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.展开更多
Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance...Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance.However,strong electrostatic interactions exist between zinc ions and host materials,and they hinder the development of advanced cathode materials for efficient,rapid,and stable Zn-ion storage.MXenes and their derivatives possess a large interlayer spacing,excellent hydrophilicity,outstanding electronic conductivity,and high redox activity.These materials are considered“rising star”cathode candidates for AZIBs.This comprehensive review discusses recent advances in MXenes as AZIB cathodes from the perspectives of crystal structure,Zn-storage mechanism,surface modification,interlayer engineering,and conductive network design to elucidate the correlations among their composition,structure,and electrochemical performance.This work also outlines the remaining challenges faced by MXenes for aqueous Zn-ion storage,such as the urgent need for improved toxic preparation methods,exploration of potential novel MXene cathodes,and suppression of layered MXene restacking upon cycling,and introduces the prospects of MXene-based cathode materials for high-performance AZIBs.展开更多
We study the friction properties of interlayer bonded bilayer graphene by simulating the movement of a slider on the surface of bilayer graphene using molecular dynamics.The results show that the presence of the inter...We study the friction properties of interlayer bonded bilayer graphene by simulating the movement of a slider on the surface of bilayer graphene using molecular dynamics.The results show that the presence of the interlayer covalent bonds due to the local sp^(3) hybridization of carbon atoms in the bilayer graphene seriously reduces the frictional coefficient of the bilayer graphene surface to 30%,depending on the coverage of interlayer sp^(3) bonds and normal loads.For a certain coverage of interlayer sp3bonds,when the normal load of the slider reaches a certain value,the surface of this interlayer bonded bilayer graphene will lose the friction reduction effect on the slider.Our findings provide guidance for the regulation and manipulation of the frictional properties of bilayer graphene surfaces through interlayer covalent bonds,which may be useful for applications of friction related graphene based nanodevices.展开更多
Although lithium-sulfur batteries(LSBs)exhibit high theoretical energy density,their practical application is hindered by poor conductivity of the sulfur cathode,the shuttle effect,and the irreversible deposition of L...Although lithium-sulfur batteries(LSBs)exhibit high theoretical energy density,their practical application is hindered by poor conductivity of the sulfur cathode,the shuttle effect,and the irreversible deposition of Li_(2)S.To address these issues,a novel composite,using electrospinning technology,consisting of Fe_(3)Se_(4)and porous nitrogen-doped carbon nanofibers was designed for the interlayer of LSBs.The porous carbon nanofiber structure facilitates the transport of ions and electrons,while the Fe_(3)Se_(4)material adsorbs lithium polysulfides(LiPSs)and accelerates its catalytic conversion process.Furthermore,the Fe_(3)Se_(4)material interacts with soluble LiPSs to generate a new polysulfide intermediate,Li_(x)FeS_(y)complex,which changes the electrochemical reaction pathway and facilitates the three-dimensional deposition of Li_(2)S,enhancing the reversibility of LSBs.The designed LSB demonstrates a high specific capacity of1529.6 mA h g^(-1)in the first cycle at 0.2 C.The rate performance is also excellent,maintaining an ultra-high specific capacity of 779.7 mA h g^(-1)at a high rate of 8 C.This investigation explores the mechanism of the interaction between the interlayer and LiPSs,and provides a new strategy to regulate the reaction kinetics and Li_(2)S deposition in LSBs.展开更多
A shaking table test for a bridge foundation reinforced by anti-slide piles on a silty clay landslide model with an inclined interlayer was performed.The deformation characteristics of the bridge foundation piles and ...A shaking table test for a bridge foundation reinforced by anti-slide piles on a silty clay landslide model with an inclined interlayer was performed.The deformation characteristics of the bridge foundation piles and anti-slide piles were analyzed in different loading conditions.The dynamic response law of a silty clay landslide with an inclined interlayer was summarized.The spacing between the rear anti-slide piles and bridge foundation should be reasonably controlled according to the seismic fortification requirements,to avoid the two peaks in the forced deformation of the bridge foundation piles.The“blocking effect”of the bridge foundation piles reduced the deformation of the forward anti-slide piles.The stress-strain response of silty clay was intensified as the vibration wave field appeared on the slope.Since the vibration intensified,the thrust distribution of the landslide underwent a process of shifting from triangle to inverted trapezoid,the difference in the acceleration response between the bearing platform and silty clay landslide tended to decrease,and the spectrum amplitude near the natural vibration frequency increased.The rear anti-slide piles were able to slow down the shear deformation of the soil in front of the piles and avoid excessive acceleration response of the bridge foundation piles.展开更多
When an underground structure passes through a liquefiable soil layer,the soil liquefaction may pose a significant threat to the structure.A centrifuge shaking table test was performed to research the seismic response...When an underground structure passes through a liquefiable soil layer,the soil liquefaction may pose a significant threat to the structure.A centrifuge shaking table test was performed to research the seismic response of underground structures in liquefiable interlayer sites,and a valid numerical model was obtained through simulation model test.Finally,the calibrated numerical model was used to perform further research on the influence of various distribution characteristics of liquefiable interlayers on the seismic reaction of underground structures.The key findings are as follows.The structure faces the most unfavorable condition once a liquefiable layer is located in the middle of the underground structure.When a liquefiable layer exists in the middle of the structure,the seismic reactions of both the underground structure and model site will increase with the rise of the thickness of the liquefiable interlayer.The inter-story drift of the structure in the non-liquefiable site is much smaller than that in the liquefiable interlayer site.The inter-story drift of the structure is not only associated with the site displacement and the soil-structure stiffness ratio but also closely associated with the slippage of the soil-structure contact interface under the condition of large deformation of the site.展开更多
Metal additive manufacturing(AM)technologies have made significant progress in the basic theoretical field since their invention in the 1970s.However,performance instability during continuous processing,such as therma...Metal additive manufacturing(AM)technologies have made significant progress in the basic theoretical field since their invention in the 1970s.However,performance instability during continuous processing,such as thermal history,residual stress accumulation,and columnar grain epitaxial growth,consistently hinders their broad application in standardized industrial production.To overcome these challenges,performance-control-oriented hybrid AM(HAM)technologies have been introduced.These technologies,by leveraging external auxiliary processes,aim to regulate microstructural evolution and mechanical properties during metal AM.This paper provides a systematic and detailed review of performance-control-oriented HAM technology,which is categorized into two main groups:energy field-assisted AM(EFed AM,e.g.ultrasonic,electromagnetic,and heat)technologies and interlayer plastic deformation-assisted AM(IPDed AM,e.g.laser shock peening,rolling,ultrasonic peening,and friction stir process)technologies.This review covers the influence of external energy fields on the melting,flow,and solidification behavior of materials,and the regulatory effects of interlayer plastic deformation on grain refinement,nucleation,and recrystallization.Furthermore,the role of performance-control-oriented HAM technologies in managing residual stress conversion,metallurgical defect closure,mechanical property improvement,and anisotropy regulation is thoroughly reviewed and discussed.The review concludes with an analysis of future development trends in EFed AM and IPDed AM technologies.展开更多
Almost all sandstone reservoirs contain interlayers. The identification and characterization of these interlayers iscritical for minimizing the uncertainty associated with oilfield development and improving oil and ga...Almost all sandstone reservoirs contain interlayers. The identification and characterization of these interlayers iscritical for minimizing the uncertainty associated with oilfield development and improving oil and gas recovery.Identifying interlayers outside wells using identification methods based on logging data and machine learning isdifficult and seismic-based identification techniques are expensive. Herein, a numerical model based on seepageand well-testing theories is introduced to identify interlayers using transient pressure data. The proposed modelrelies on the open-source MATLAB Reservoir Simulation Toolbox. The effects of the interlayer thickness, position,and width on the pressure response are thoroughly investigated. A procedure for inverting interlayer parametersin the reservoir using the bottom-hole pressure is also proposed. This method uses only transient pressuredata during well testing and can effectively identify the interlayer distribution near the wellbore at an extremelylow cost. The reliability of the model is verified using effective oilfield examples.展开更多
基金supported by the National Natural Science Foundation of China (No. 41976074)National Key Research and Development Plan (No. 2017YFC030 7600)+2 种基金the Taishan Scholar Special Experts Project (No. ts201712079)Qingdao National Laboratory for Marine Science and Technology (No. QNLM2016ORP0207)the Graduate School Innovation Program of China University of Petroleum (East China) (No. YCX2019020)
文摘The complex distribution of gas hydrate in sediments makes understanding the mechanical properties of hydrate-bearing sediments a challenging task.The mechanical behaviors of hydrate-bearing interlayered sediments are still poorly known.A series of triaxial shearing tests were conducted to investigate the strength parameters and deformation properties of methane hydrate-bearing interlayered sediments at the effective pressure of 1 MPa.The results indicate that the stress-strain curves of hydrate-bearing interlayered sediments are significantly different from that of hydrate-bearing sediments.The peak strength,Young's modulus,initial yielding modulus,and failure mode are deeply affected by the methane hydrate distribution.The failure behaviors and mechanism of strain softening and hardening patterns of the interlayered specimens are more complicated than those of the integrated specimens.This study compares the different mechanical behaviors between integrated and interlayered specimens containing gas hydrate,which can serve as a reference for the prediction and analysis of the deformation behaviors of natural gas hydrate reservoirs.
文摘Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure of the materials was studied by an X-ray powder diffractometer and a Fourier transform infrared (FTIR) spectrometer.The results indicated that the basal spacing [d(001) value] of the materials was increased significantly to 1.9194 nm relative to Na-montmorillonite (1.2182 nm).After calcined for 2 h at 300℃,the basal spacing was stabilized at 1.8394 nm and the layered structure of the materials was not destroyed.Thermal analysis was conducted by a thermal gravimetry and differential thermal analysis (TG-DTA) instrument,it showed that Al-PILM lost physically adsorbed water below 230.6℃ and water formed by dehydroxylation of the pillars at around 497.1℃, with a peak of the phase transformation at 903.0℃.
基金supported by the National Natural Science Foundation of China(Nos.52003253 and 52203245)the China Postdoctoral Innovative Talent Support Program(No.BX20220274)the Henan Science and Technology Department,China(No.222301420004)。
文摘As the main component of wearable electronic equipment,flexible pressure sensors have attracted wide attention due to their excellent sensitivity and their promise with respect to applications in health monitoring,electronic skin,and human-computer interactions.However,it remains a significant challenge to achieve epidermal sensing over a wide sensing range,with short response/recovery time and featuring seamless conformability to the skin simultaneously.This is critical since the capture of minute electrophysiological signals is important for health care applications.In this paper,we report the preparation of a nacre-like MXene/sodium carboxymethyl cellulose(CMC)nanocomposite film with a“brick-and-mortar”interior structure using a vacuum-induced self-assembly strategy.The synergistic behavior of the MXene“brick”and flexible CMC“mortar”contributes to attenuating interlamellar self-stacking and creates numerous variable conductive pathways on the sensing film.This resulted in a high sensitivity over a broad pressure range(i.e.,0.03-22.37 kPa:162.13 kPa^(-1);22.37-135.71 kPa:127.88 kPa^(-1);135.71-286.49 kPa:100.58 kPa^(-1)).This sensor also has a low detection limit(0.85 Pa),short response/recovery time(8.58 ms/34.34 ms),and good stability(2000 cycles).Furthermore,we deployed pressure sensors to distinguish among tiny particles,various physiological signals of the human body,space arrays,robot motion monitoring,and other related applications to demonstrate their feasibility for a variety of health and motion monitoring use cases.
基金supported by National Natural Science Foundation of China(No.51971046)Fundamental Research Funds for the Central Universities,China(No.2020CDJGFCL005)。
文摘TC21 titanium alloy,as an important metal to fabricate the aircraft structural components,has attracted great attentions recently.A TC21 titanium alloy with widmanst?tten structure was isothermally compressed.Based on the microstructure observation,the evolution of initialβgrain,Grain Boundaryαphase(α;),lamellar a and interlayeredβwas systematically investigated.The results showed that,with the increasing of height reduction,theα;underwent an evolution process from bending/kinking to breaking inducing the corresponding blurring of initial coarse b grain outline.Meanwhile,a significant phase transformation from a to b took place at the terminations of brokenα;.The evolution of lamellarαand interlayeredβin the colony was closely related to their deformation compatibility.In the a colony,the interlayered b experienced a larger deformation amount than lamellarα.The higher distortion energy promoted the occurrence of Dynamic Recovery(DRV)and Dynamic Recrystallization(DRX)to generate many Low Angle Boundaries(LABs)and High Angle Boundaries(HABs)in interlayered b,which induced an apparent grain refinement of b phase.On the contrary,the lower distortion energy and low deformation temperature suppressed the occurrence of DRV/DRX and restrained the globularization of lamellarα.Furthermore,the microstructure observation clearly revealed that the shearing separation mechanism dominated the evolution of the a phase from lamellar to short bar-like morphology.
基金supported by the National Nature Science Foundation of China [52172247, 21875237]the National Key R&D Program of China [2018YFB0905400]。
文摘The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low potential.Nonetheless,the formation and growth of dendrites seriously compromise battery life and safety.Herein,an yttriastabilized bismuth oxide(YSB) layer is fabricated on the polypropylene(PP) separator,where YSB reacts with Li anode in-situ in the cell to form a multi-component composite interlayer consisting of Li_(3)Bi,Li_(2)O,and Y_(2)O_(3).The interlayer can function not only as a redistributor to regulate Li^(+) distribution but also as an anion adsorber to increase the Li^(+) transference number from 0.37 to 0.79 for suppressing dendrite nucleation and growth.Consequently,compared with the cell with a baseline separator,those with modified separators exhibit prolonged lifespan in both Li/Li symmetrical cells and Li/Cu half-cells.Notably,the full cells coupled with ultrahigh-loading LiFePO_(4) display an excellent cycling performance of 1700 cycles with a high capacity retention of ~80% at 1 C,exhibiting great potential for practical applications.This work provides a feasible and effective new strategy for separator modification towards building a much-anticipated dendrite-free Li anode and realizing long-lifespan lithium metal batteries.
基金China Scholarship Council,Grant/Award Number:201806950083Advanced Materials research program of the Zernike National Research CentreFaculty of Science and Engineering(FSE),University of Groningen。
文摘The development of lithium-sulfur(Li-S)batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and charge.Herein,the crystallinities of a titanium nitride(TiN)film on copper-embedded carbon nanofibers(Cu-CNFs)are regulated and the nanofibers are used as interlayers to resolve the aforementioned crucial issues.A low-crystalline TiN-coated Cu-CNF(L-TiN-Cu-CNF)interlayer is compared with its highly crystalline counterpart(H-TiN-Cu-CNFs).It is demonstrated that the L-TiN coating not only strengthens the chemical adsorption toward polysulfides but also greatly accelerates the electrochemical conversion of polysulfides.Due to robust carbon frameworks and enhanced kinetics,impressive highrate performance at 2 C(913 mAh g^(-1)based on sulfur)as well as remarkable cyclic stability up to 300 cycles(626 mAh g^(-1))with capacity retention of 46.5%is realized for L-TiN-Cu-CNF interlayer-configured Li-S batteries.Even under high loading(3.8 mg cm^(-2))of sulfur and relatively lean electrolyte(10μL electrolyte per milligram sulfur)conditions,the Li-S battery equipped with L-TiN-Cu-CNF interlayers delivers a high capacity of 1144 mAh g^(-1)with cathodic capacity of 4.25 mAh cm^(-2)at 0.1 C,providing a potential pathway toward the design of multifunctional interlayers for highly efficient Li-S batteries.
基金supported by the National Research Foundation, Prime Minister’s Office, Singapore, under its Competitive Research Programme (CRP award number NRF-CRP22-2019-008)Medium-Sized Centre Programme (CA2DM)+1 种基金the Ministry of Education of Singapore, under its Research Centre of Excellence award to the Institute for Functional Intelligent Materials (I-FIM, Project No. EDUNC-33-18-279-V12)by the EDB Singapore, under its Space Technology Development Programme (S2219013-STDP)。
文摘Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass loadings crucial for practical use.The root of these challenges lies in the mechanical instability of the material,which subsequently leads to the structural failure of the electrode.Here,we present a novel synthesis of a composite combining expanded graphite and silicon nanoparticles.This composite features a unique interlayer-bonded graphite structure,achieved through the application of a modified spark plasma sintering method.Notably,this innovative structure not only facilitates efficient ion and electron transport but also provides exceptional mechanical strength(Vickers hardness:up to658 MPa,Young's modulus:11.6 GPa).This strength effectively accommodates silicon expansion,resulting in an impressive areal capacity of 2.9 mA h cm^(-2)(736 mA h g^(-1)) and a steady cycle life(93% after 100cycles).Such outsta nding performance is paired with features appropriate for large-scale industrial production of silicon batteries,such as active mass loading of at least 3.9 mg cm^(-2),a high-tap density electrode material of 1.68 g cm^(-3)(secondary clusters:1.12 g cm^(-3)),and a production yield of up to 1 kg per day.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12074213, 11574108, 12104253, 12104034, 12022415, and 12374054)the Major Basic Program of Natural Science Foundation of Shandong Province (Grant No. ZR2021ZD01)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Based on first-principles calculations, we systematically study the stacking energy and interlayer magnetic interaction of the heterobilayer composed of CrI_(3) and CrSe_(2) monolayers. It is found that the stacking order plays a crucial role in the interlayer magnetic coupling. Among all possible stacking structures, the AA-stacking is the most stable heterostructure, exhibiting interlayer antiferromagnetic interactions. Interestingly, the interlayer magnetic interaction can be effectively tuned by biaxial strain. A 4.3% compressive strain would result in a ferromagnetic interlayer interaction in all stacking orders. These results reveal the magnetic properties of CrI_(3)/CrSe_(2) heterostructure, which is expected to be applied to spintronic devices.
基金supported by the King Abdul ah University of Science and Technology(KAUST)office of Research Administration(ORA)under award No:OSR-CCF-3079 and OSR-2016-CRG5-3029the National Research Foundation of Korea(2019R1A6A1A11044070)
文摘The development of high-performance organic solar cells(OSCs)with high operational stability is essential to accelerate their commercialization.Unfortunately,our understanding of the origin of instabilities in state-of-the-art OSCs based on bulk heterojunction(BHJ)featuring non-fullerene acceptors(NFAs)remains limited.Herein,we developed NFA-based OSCs using different charge extraction interlayer materials and studied their storage,thermal,and operational stabilities.Despite the high power conversion efficiency(PCE)of the OSCs(17.54%),we found that cells featuring self-assembled monolayers(SAMs)as hole-extraction interlayers exhibited poor stability.The time required for these OSCs to reach 80%of their initial performance(T_(80))was only 6h under continuous thermal stress at 85℃in a nitrogen atmosphere and 1 h under maximum power point tracking(MPPT)in a vacuum.Inserting MoO_(x)between ITO and SAM enhanced the T_(80)to 50 and~15 h after the thermal and operational stability tests,respectively,while maintaining a PCE of 16.9%.Replacing the organic PDINN electron transport layer with ZnO NPs further enhances the cells'thermal and operational stability,boosting the T_(80)to 1000 and 170 h,respectively.Our work reveals the synergistic roles of charge-selective interlayers and device architecture in developing efficient and stable OSCs.
基金financially supported by the National Ten Thousand Talent Program for Young Top-notch Talent,China,the National Natural Science Fund for Excellent Young Scholars,China(52022030)the National Natural Science Foundation of China,China(51972111,52203330)+7 种基金the Shanghai Pilot Program for Basic Research,China(22TQ1400100-5)the “Dawn”Program of Shanghai Education Commission,China(22SG28)the Shanghai Municipal Natural Science Foundation,China(22ZR1418000)the Science and Technology Innovation Plan of Shanghai Science and Technology Commission,China(22YF1410000)the Postdoctoral Research Foundation of China,China(2021M701190)the Fundamental Research Funds for the Central Universities,China(JKD01231632,JKVD1231041)the Major Science and Technology Projects of Inner Mongolia Autonomous Region,China(2021ZD0042)the Shanghai Engineering Research Center of Hierarchical Nanomaterials,China(18DZ2252400)。
文摘Inverted perovskite solar cells(PSCs) have attracted broad research and industrial interest owing to their suppressed hysteresis,cost-effectiveness,and easy-fabrication.However,the issue of non-radiative recombination losses at the n-type interface between the perovskite and fullerene has impeded further improvement of photovoltaic performance.Here,we modify the n-type interface of FAPbI_(3) perovskite films by constructing a stereochemical two-dimensional(2D) perovskite interlayer,in which the organic cations comprise both pyridine and ammonium groups.The pyridine N donor can create stable bonding with the surface-uncoordinated Pb on the perovskite,thereby passivating the shallow-level defects and enhancing the air stability of the film.Furthermore,the pyridine N donor also offers a positive polar interface to decrease the surface work function of the perovskite film,enabling n-type modification.Ultimately,we employ a p-i-n photovoltaic(PV) device with the positive dipole interlayer at perovskite/fullerene contact and achieve remarkable photoelectric conversion efficiency(PCE) of 22.0%.
基金supported by the National Natural Science Foundation of China(Grant No.11704197)the Natural Science Foundation of Nanjing University of Posts and Telecommunications(Grant Nos.NY221066 and NY223074).
文摘We investigate the peak structure in the interlayer conductance of Moirésuperlattices using a tunneling theory wedeveloped previously.The theoretical results predict that,due to the resonance of two different partial waves,the doublepeakstructure can appear in the curve of the interlayer conductance versus twist angle.Furthermore,we study the influencesof the model parameters,i.e.,the chemical potential of electrodes,the thickness of Moirésuperlattice,and the strength ofinterface potential,on the peak structure of the interlayer conductance.In particular,the parameter dependence of the peakstructure is concluded via a phase diagram,and the physical meanings of the phase diagram is formulized.Finally,thepotential applications of the present work is discussed.
基金This work was supported by the Australian Research Council via Discovery Projects(Nos.DP200103315,DP200103332 and DP230100685)Linkage Projects(No.LP220200920).The authors acknowledge the Microscopy and Microanalysis Facility—John de Laeter Centre,Curtin University for the scientific and technical assistance of material characterizations.L.Zhao and C.Cao would like to acknowledge the PhD scholarship supported by BLACKSTONE Minerals Ltd.
文摘The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder their practical implementation.Polymer has been used extensively to improve the cathode-electrolyte interface in garnet-based all-solid-state LIBs(ASSLBs),while it introduces new concerns about thermal stability.In this study,we propose the incorporation of a multi-functional flame-retardant triphenyl phos-phate additive into poly(ethylene oxide),acting as a thin buffer layer between LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode and garnet electro-lyte.Through electrochemical stability tests,cycling performance evaluations,interfacial thermal stability analysis and flammability tests,improved thermal stability(capacity retention of 98.5%after 100 cycles at 60℃,and 89.6%after 50 cycles at 80℃)and safety characteristics(safe and stable cycling up to 100℃)are demonstrated.Based on various materials characterizations,the mechanism for the improved thermal stability of the interface is proposed.The results highlight the potential of multi-functional flame-retardant additives to address the challenges associated with the electrode-electrolyte interface in ASSLBs at high temperature.Efficient thermal modification in ASSLBs operating at elevated temperatures is also essential for enabling large-scale energy storage with safety being the primary concern.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFA1402500)the National Natural Science Foundation of China(Grant No.62125402)。
文摘Moiré superlattices(MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges in its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS_(2) MSL as an example, we find prominent properties including large band gap reduction(~ 0.4 e V) and enhanced optical activity. Firstprinciples calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.
基金the National Natural Science Foundation of China(Nos.52372171,22075016,and 52201201)the National Program for Support of Top-notch Young Professionals,China+3 种基金the Interdisciplinary Research Project for Young Teachers of University of Science and Technology Beijing,China(No.FRF-IDRY-21-011)the State Key Laboratory for Advanced Metals and Materials,China(No.2022Z-17)the Ministry of Education Social Science Project,China(No.18YJC790087)the“Xiaomi Young Scholar”Funding Project,China,and the 111 Project,China(No.B170003)。
文摘Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical performance.However,strong electrostatic interactions exist between zinc ions and host materials,and they hinder the development of advanced cathode materials for efficient,rapid,and stable Zn-ion storage.MXenes and their derivatives possess a large interlayer spacing,excellent hydrophilicity,outstanding electronic conductivity,and high redox activity.These materials are considered“rising star”cathode candidates for AZIBs.This comprehensive review discusses recent advances in MXenes as AZIB cathodes from the perspectives of crystal structure,Zn-storage mechanism,surface modification,interlayer engineering,and conductive network design to elucidate the correlations among their composition,structure,and electrochemical performance.This work also outlines the remaining challenges faced by MXenes for aqueous Zn-ion storage,such as the urgent need for improved toxic preparation methods,exploration of potential novel MXene cathodes,and suppression of layered MXene restacking upon cycling,and introduces the prospects of MXene-based cathode materials for high-performance AZIBs.
基金supported by the Doctor Fund and the Program of independent Research for Young Teachers of Yanshan University (Grant Nos.B919 and 020000534)。
文摘We study the friction properties of interlayer bonded bilayer graphene by simulating the movement of a slider on the surface of bilayer graphene using molecular dynamics.The results show that the presence of the interlayer covalent bonds due to the local sp^(3) hybridization of carbon atoms in the bilayer graphene seriously reduces the frictional coefficient of the bilayer graphene surface to 30%,depending on the coverage of interlayer sp^(3) bonds and normal loads.For a certain coverage of interlayer sp3bonds,when the normal load of the slider reaches a certain value,the surface of this interlayer bonded bilayer graphene will lose the friction reduction effect on the slider.Our findings provide guidance for the regulation and manipulation of the frictional properties of bilayer graphene surfaces through interlayer covalent bonds,which may be useful for applications of friction related graphene based nanodevices.
基金financially supported by the National Natural Science Foundation of China(No.22372103)Guangdong Basic and Applied Basic Research Foundation,China(2021A1515010241,2024A1515010032)the Shenzhen Science and Technology Foundation,China(JCYJ20220531103216037)。
文摘Although lithium-sulfur batteries(LSBs)exhibit high theoretical energy density,their practical application is hindered by poor conductivity of the sulfur cathode,the shuttle effect,and the irreversible deposition of Li_(2)S.To address these issues,a novel composite,using electrospinning technology,consisting of Fe_(3)Se_(4)and porous nitrogen-doped carbon nanofibers was designed for the interlayer of LSBs.The porous carbon nanofiber structure facilitates the transport of ions and electrons,while the Fe_(3)Se_(4)material adsorbs lithium polysulfides(LiPSs)and accelerates its catalytic conversion process.Furthermore,the Fe_(3)Se_(4)material interacts with soluble LiPSs to generate a new polysulfide intermediate,Li_(x)FeS_(y)complex,which changes the electrochemical reaction pathway and facilitates the three-dimensional deposition of Li_(2)S,enhancing the reversibility of LSBs.The designed LSB demonstrates a high specific capacity of1529.6 mA h g^(-1)in the first cycle at 0.2 C.The rate performance is also excellent,maintaining an ultra-high specific capacity of 779.7 mA h g^(-1)at a high rate of 8 C.This investigation explores the mechanism of the interaction between the interlayer and LiPSs,and provides a new strategy to regulate the reaction kinetics and Li_(2)S deposition in LSBs.
基金Sichuan Science and Technology Program under Grant No.2023NSFSC0894Major Project of the Science and Technology Research and Development Program of the Ministry of Railways of China under Grant No.Z2012-061。
文摘A shaking table test for a bridge foundation reinforced by anti-slide piles on a silty clay landslide model with an inclined interlayer was performed.The deformation characteristics of the bridge foundation piles and anti-slide piles were analyzed in different loading conditions.The dynamic response law of a silty clay landslide with an inclined interlayer was summarized.The spacing between the rear anti-slide piles and bridge foundation should be reasonably controlled according to the seismic fortification requirements,to avoid the two peaks in the forced deformation of the bridge foundation piles.The“blocking effect”of the bridge foundation piles reduced the deformation of the forward anti-slide piles.The stress-strain response of silty clay was intensified as the vibration wave field appeared on the slope.Since the vibration intensified,the thrust distribution of the landslide underwent a process of shifting from triangle to inverted trapezoid,the difference in the acceleration response between the bearing platform and silty clay landslide tended to decrease,and the spectrum amplitude near the natural vibration frequency increased.The rear anti-slide piles were able to slow down the shear deformation of the soil in front of the piles and avoid excessive acceleration response of the bridge foundation piles.
基金National Natural Science Foundation of China under Grant No.52078020。
文摘When an underground structure passes through a liquefiable soil layer,the soil liquefaction may pose a significant threat to the structure.A centrifuge shaking table test was performed to research the seismic response of underground structures in liquefiable interlayer sites,and a valid numerical model was obtained through simulation model test.Finally,the calibrated numerical model was used to perform further research on the influence of various distribution characteristics of liquefiable interlayers on the seismic reaction of underground structures.The key findings are as follows.The structure faces the most unfavorable condition once a liquefiable layer is located in the middle of the underground structure.When a liquefiable layer exists in the middle of the structure,the seismic reactions of both the underground structure and model site will increase with the rise of the thickness of the liquefiable interlayer.The inter-story drift of the structure in the non-liquefiable site is much smaller than that in the liquefiable interlayer site.The inter-story drift of the structure is not only associated with the site displacement and the soil-structure stiffness ratio but also closely associated with the slippage of the soil-structure contact interface under the condition of large deformation of the site.
基金The financial support was provided by National Natural Science Foundation of China(Grant Numbers:52335008,52175409 and 52305469)Jiangsu Provincial Science and Technology Projects in China(Grant Numbers:BE2023026and BE2022069)+1 种基金Natural Science Foundation of Jiangsu Province(No.BK20220530)the Graduate Research Innovation Program of Jiangsu Province in China(Grant Number:KYCX23_3723)。
文摘Metal additive manufacturing(AM)technologies have made significant progress in the basic theoretical field since their invention in the 1970s.However,performance instability during continuous processing,such as thermal history,residual stress accumulation,and columnar grain epitaxial growth,consistently hinders their broad application in standardized industrial production.To overcome these challenges,performance-control-oriented hybrid AM(HAM)technologies have been introduced.These technologies,by leveraging external auxiliary processes,aim to regulate microstructural evolution and mechanical properties during metal AM.This paper provides a systematic and detailed review of performance-control-oriented HAM technology,which is categorized into two main groups:energy field-assisted AM(EFed AM,e.g.ultrasonic,electromagnetic,and heat)technologies and interlayer plastic deformation-assisted AM(IPDed AM,e.g.laser shock peening,rolling,ultrasonic peening,and friction stir process)technologies.This review covers the influence of external energy fields on the melting,flow,and solidification behavior of materials,and the regulatory effects of interlayer plastic deformation on grain refinement,nucleation,and recrystallization.Furthermore,the role of performance-control-oriented HAM technologies in managing residual stress conversion,metallurgical defect closure,mechanical property improvement,and anisotropy regulation is thoroughly reviewed and discussed.The review concludes with an analysis of future development trends in EFed AM and IPDed AM technologies.
文摘Almost all sandstone reservoirs contain interlayers. The identification and characterization of these interlayers iscritical for minimizing the uncertainty associated with oilfield development and improving oil and gas recovery.Identifying interlayers outside wells using identification methods based on logging data and machine learning isdifficult and seismic-based identification techniques are expensive. Herein, a numerical model based on seepageand well-testing theories is introduced to identify interlayers using transient pressure data. The proposed modelrelies on the open-source MATLAB Reservoir Simulation Toolbox. The effects of the interlayer thickness, position,and width on the pressure response are thoroughly investigated. A procedure for inverting interlayer parametersin the reservoir using the bottom-hole pressure is also proposed. This method uses only transient pressuredata during well testing and can effectively identify the interlayer distribution near the wellbore at an extremelylow cost. The reliability of the model is verified using effective oilfield examples.
