After discussion on the mechanism of polymer particle nucleation and growth in inverse microemulsion polymerization, a schematic physical model for polymerization of acrylamide in inverse microemulsions was presented....After discussion on the mechanism of polymer particle nucleation and growth in inverse microemulsion polymerization, a schematic physical model for polymerization of acrylamide in inverse microemulsions was presented. Furthermore, several key problems in mathematically modeling of inverse microemulsion polymerization were pointed out.展开更多
The polymerization of the inverse microemulsions composed of methyl methacrylate,acrylic acid, sodium dodecyl sulfate and water was monitored by refractometer, conductometer andtime-resolved light scattering device. T...The polymerization of the inverse microemulsions composed of methyl methacrylate,acrylic acid, sodium dodecyl sulfate and water was monitored by refractometer, conductometer andtime-resolved light scattering device. The results showed that refractive index, conductivity orintensity distribution of scattered light changed along with polymerization, and different processesof polymerization could be identified.展开更多
In this paper,we investigate the reverse order law for Drazin inverse of three bound-ed linear operators under some commutation relations.Moreover,the Drazin invertibility of sum is also obtained for two bounded linea...In this paper,we investigate the reverse order law for Drazin inverse of three bound-ed linear operators under some commutation relations.Moreover,the Drazin invertibility of sum is also obtained for two bounded linear operators and its expression is presented.展开更多
Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conv...Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conventional inverse analysis cannot deal with uncertainty in geotechnical and geological systems.In this study,a framework was developed to evaluate and quantify uncertainty in inverse analysis based on the reduced-order model(ROM)and probabilistic programming.The ROM was utilized to capture the mechanical and deformation properties of surrounding rock mass in geomechanical problems.Probabilistic programming was employed to evaluate uncertainty during construction in geotechnical engineering.A circular tunnel was then used to illustrate the proposed framework using analytical and numerical solution.The results show that the geomechanical parameters and associated uncertainty can be properly obtained and the proposed framework can capture the mechanical behaviors under uncertainty.Then,a slope case was employed to demonstrate the performance of the developed framework.The results prove that the proposed framework provides a scientific,feasible,and effective tool to characterize the properties and physical mechanism of geomaterials under uncertainty in geotechnical engineering problems.展开更多
This paper presents a novel sequential inverse optimal control(SIOC)method for discrete-time systems,which calculates the unknown weight vectors of the cost function in real time using the input and output of an optim...This paper presents a novel sequential inverse optimal control(SIOC)method for discrete-time systems,which calculates the unknown weight vectors of the cost function in real time using the input and output of an optimally controlled discrete-time system.The proposed method overcomes the limitations of previous approaches by eliminating the need for the invertible Jacobian assumption.It calculates the possible-solution spaces and their intersections sequentially until the dimension of the intersection space decreases to one.The remaining one-dimensional vector of the possible-solution space’s intersection represents the SIOC solution.The paper presents clear conditions for convergence and addresses the issue of noisy data by clarifying the conditions for the singular values of the matrices that relate to the possible-solution space.The effectiveness of the proposed method is demonstrated through simulation results.展开更多
Accurate diagnosis of apple leaf diseases is crucial for improving the quality of apple production and promoting the development of the apple industry. However, apple leaf diseases do not differ significantly from ima...Accurate diagnosis of apple leaf diseases is crucial for improving the quality of apple production and promoting the development of the apple industry. However, apple leaf diseases do not differ significantly from image texture and structural information. The difficulties in disease feature extraction in complex backgrounds slow the related research progress. To address the problems, this paper proposes an improved multi-scale inverse bottleneck residual network model based on a triplet parallel attention mechanism, which is built upon ResNet-50, while improving and combining the inception module and ResNext inverse bottleneck blocks, to recognize seven types of apple leaf(including six diseases of alternaria leaf spot, brown spot, grey spot, mosaic, rust, scab, and one healthy). First, the 3×3 convolutions in some of the residual modules are replaced by multi-scale residual convolutions, the convolution kernels of different sizes contained in each branch of the multi-scale convolution are applied to extract feature maps of different sizes, and the outputs of these branches are multi-scale fused by summing to enrich the output features of the images. Second, the global layer-wise dynamic coordinated inverse bottleneck structure is used to reduce the network feature loss. The inverse bottleneck structure makes the image information less lossy when transforming from different dimensional feature spaces. The fusion of multi-scale and layer-wise dynamic coordinated inverse bottlenecks makes the model effectively balances computational efficiency and feature representation capability, and more robust with a combination of horizontal and vertical features in the fine identification of apple leaf diseases. Finally, after each improved module, a triplet parallel attention module is integrated with cross-dimensional interactions among channels through rotations and residual transformations, which improves the parallel search efficiency of important features and the recognition rate of the network with relatively small computational costs while the dimensional dependencies are improved. To verify the validity of the model in this paper, we uniformly enhance apple leaf disease images screened from the public data sets of Plant Village, Baidu Flying Paddle, and the Internet. The final processed image count is 14,000. The ablation study, pre-processing comparison, and method comparison are conducted on the processed datasets. The experimental results demonstrate that the proposed method reaches 98.73% accuracy on the adopted datasets, which is 1.82% higher than the classical ResNet-50 model, and 0.29% better than the apple leaf disease datasets before preprocessing. It also achieves competitive results in apple leaf disease identification compared to some state-ofthe-art methods.展开更多
In the past decade,notable progress has been achieved in the development of the generalized finite difference method(GFDM).The underlying principle of GFDM involves dividing the domain into multiple sub-domains.Within...In the past decade,notable progress has been achieved in the development of the generalized finite difference method(GFDM).The underlying principle of GFDM involves dividing the domain into multiple sub-domains.Within each sub-domain,explicit formulas for the necessary partial derivatives of the partial differential equations(PDEs)can be obtained through the application of Taylor series expansion and moving-least square approximation methods.Consequently,the method generates a sparse coefficient matrix,exhibiting a banded structure,making it highly advantageous for large-scale engineering computations.In this study,we present the application of the GFDM to numerically solve inverse Cauchy problems in two-and three-dimensional piezoelectric structures.Through our preliminary numerical experiments,we demonstrate that the proposed GFDMapproach shows great promise for accurately simulating coupled electroelastic equations in inverse problems,even with 3%errors added to the input data.展开更多
This paper presents a novel view of the impact of electron collision off-axis positions on the dynamic properties and relativistic nonlinear Thomson inverse scattering of excited electrons within tightly focused, circ...This paper presents a novel view of the impact of electron collision off-axis positions on the dynamic properties and relativistic nonlinear Thomson inverse scattering of excited electrons within tightly focused, circularly polarized laser pulses of varying intensities. We examine the effects of the transverse ponderomotive force, specifically how the deviation angle and speed of electron motion are affected by the initial off-axis position of the electron and the peak amplitude of the laser pulse. When the laser pulse intensity is low, an increase in the electron's initial off-axis distance results in reduced spatial radiation power, improved collimation, super-continuum phenomena generation, red-shifting of the spectrum's harmonic peak, and significant symmetry in the radiation radial direction. However, in contradiction to conventional understandings,when the laser pulse intensity is relatively high, the properties of the relativistic nonlinear Thomson inverse scattering of the electron deviate from the central axis, changing direction in opposition to the aforementioned effects. After reaching a peak, these properties then shift again, aligning with the previous direction. The complex interplay of these effects suggests a greater nuance and intricacy in the relationship between laser pulse intensity, electron position, and scattering properties than previously thought.展开更多
Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights t...Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights the importance of addressing race conditions in parallel image processing, specifically focusing on color inverse filtering using OpenMP. We considered three solutions to solve race conditions, each with distinct characteristics: #pragma omp atomic: Protects individual memory operations for fine-grained control. #pragma omp critical: Protects entire code blocks for exclusive access. #pragma omp parallel sections reduction: Employs a reduction clause for safe aggregation of values across threads. Our findings show that the produced images were unaffected by race condition. However, it becomes evident that solving the race conditions in the code makes it significantly faster, especially when it is executed on multiple cores.展开更多
In this paper, the inverse spectral problem of Sturm-Liouville operator with boundary conditions and jump conditions dependent on the spectral parameter is investigated. Firstly, the self-adjointness of the problem an...In this paper, the inverse spectral problem of Sturm-Liouville operator with boundary conditions and jump conditions dependent on the spectral parameter is investigated. Firstly, the self-adjointness of the problem and the eigenvalue properties are given, then the asymptotic formulas of eigenvalues and eigenfunctions are presented. Finally, the uniqueness theorems of the corresponding inverse problems are given by Weyl function theory and inverse spectral data approach.展开更多
In recent years,China has implemented several measures to improve air quality.The Beijing-Tianjin-Hebei(BTH)region is one area that has suffered from the most serious air pollution in China and has undergone huge chan...In recent years,China has implemented several measures to improve air quality.The Beijing-Tianjin-Hebei(BTH)region is one area that has suffered from the most serious air pollution in China and has undergone huge changes in air quality in the past few years.How to scientifically assess these change processes remain the key issue in further improving the air quality over this region in the future.To evaluate the changes in major air pollutant emissions over this region,this paper employs ensemble Kalman filtering(EnKF)for integrating the national ground monitoring pollutant observation data and the Nested Air Quality Prediction Modeling System(NAQPMS)simulation data to inversely estimate the emission rates of SO_(2),NOX,CO,and primary PM_(2.5)over BTH region in February from 2014 to 2019.The results show that SO_(2),NOX,CO,and primary PM_(2.5)emissions in the BTH region decreased in February from 2014 to 2019 by 83%,37%,41%,and 42%,while decreases in Beijing during this period were 86%,67%,59%,and 65%,respectively.Compared with the prior emission inventory,the inversion emission inventory reduces the uncertainty of multi-pollutant simulation in the BTH region,with simulated root mean square errors of the monthly average concentrations of SO_(2),NOX,PM_(2.5),and CO reduced by 41%,30%,31%,and 22%,respectively.The average uncertainties of SO_(2),NOX,PM_(2.5),and CO inversion emissions in2014-19 are±14.03%yr^(-1),±28.91%yr^(-1),±126.15%yr^(-1),and±43.58%yr^(-1).Compared with the uncertainty of MEIC emission,the uncertainties of all species changed by+2%yr^(-1),-2%yr^(-1),-26%yr^(-1),and-4%yr^(-1),respectively.The spatial distribution results illustrate that air pollutant emissions are mainly distributed over the eastern and southern BTH regions.The spatial gap between the inversion emissions and MEIC emissions was further closed in 2019 compared to 2014.The results of this paper can provide a new reference for assessing changes in air pollution emissions over the BTH region in recent years and validating a bottom-up emission inventory.展开更多
Inverse design focuses on identifying photonic structures to optimize the performance of photonic devices.Conventional scalar-based inverse design approaches are insufficient to design photonic devices of anisotropic ...Inverse design focuses on identifying photonic structures to optimize the performance of photonic devices.Conventional scalar-based inverse design approaches are insufficient to design photonic devices of anisotropic materials such as lithium niobate(LN).To the best of our knowledge,this work proposes for the first time the inverse design method for anisotropic materials to optimize the structure of anisotropic-material based photonics devices.Specifically,the orientation dependent properties of anisotropic materials are included in the adjoint method,which provides a more precise prediction of light propagation within such materials.The proposed method is used to design ultra-compact wavelength division demultiplexers in the X-cut thin-film lithium niobate(TFLN)platform.By benchmarking the device performances of our method with those of classical scalar-based inverse design,we demonstrate that this method properly addresses the critical issue of material anisotropy in the X-cut TFLN platform.This proposed method fills the gap of inverse design of anisotropic materials based photonic devices,which finds prominent applications in TFLN platforms and other anisotropicmaterial based photonic integration platforms.展开更多
Thermal metamaterials offer a promising avenue for creating artificial materials with unconventional physical properties,such as thermal cloak,concentrator,rotator,and illusion.However,designs and fabrication of therm...Thermal metamaterials offer a promising avenue for creating artificial materials with unconventional physical properties,such as thermal cloak,concentrator,rotator,and illusion.However,designs and fabrication of thermal metamaterials are of challenge due to the limitations of existing methods on anisotropic material properties.We propose an evolutionary framework for designing thermal metamaterials using genetic algorithm optimization.Our approach encodes unit cells with different thermal conductivities and performs global optimization using the evolution-inspired operators.We further fabricate the thermal functional cells using 3D printing and verify their thermal illusion functionality experimentally.Our study introduces a new design paradigm for advanced thermal metamaterials that can manipulate heat flows robustly and realize functional thermal metadevices without anisotropic thermal conductivity.Our approach can be easily applied to fabrications in various fields such as thermal management and thermal sensing.展开更多
Objective:The objective of this work is to investigate the mapping relationship between transcranial ultrasound image quality and transcranial acoustic metamaterial parameters using inverse design methods.Impact State...Objective:The objective of this work is to investigate the mapping relationship between transcranial ultrasound image quality and transcranial acoustic metamaterial parameters using inverse design methods.Impact Statement:Our study provides insights into inverse design methods and opens the route to guide the preparation of transcranial acoustic metamaterials.Introduction:The development of acoustic metamaterials has enabled the exploration of cranial ultrasound,and it has been found that the influence of the skull distortion layer on acoustic waves can be effectively eliminated by adjusting the parameters of the acoustic metamaterial.However,the interaction mechanism between transcranial ultrasound images and transcranial acoustic metamaterial parameters is unknown.Methods:In this study,1,456 transcranial ultrasound image datasets were used to explore the mapping relationship between the quality of transcranial ultrasound images and the parameters of transcranial acoustic metamaterials.Results:The multioutput parameter prediction model of transcranial metamaterials based on deep back-propagation neural network was built,and metamaterial parameters under transcranial image evaluation indices are predicted using the prediction model.Conclusion:This inverse big data design approach paves the way for guiding the preparation of transcranial metamaterials.展开更多
This work explores the inverse stochastic resonance(ISR) induced by bounded noise and the multiple inverse stochastic resonance induced by time delay by constructing a modular neural network, where the modified Oja’s...This work explores the inverse stochastic resonance(ISR) induced by bounded noise and the multiple inverse stochastic resonance induced by time delay by constructing a modular neural network, where the modified Oja’s synaptic learning rule is employed to characterize synaptic plasticity in this network. Meanwhile, the effects of synaptic plasticity on the ISR dynamics are investigated. Through numerical simulations, it is found that the mean firing rate curve under the influence of bounded noise has an inverted bell-like shape, which implies the appearance of ISR. Moreover, synaptic plasticity with smaller learning rate strengthens this ISR phenomenon, while synaptic plasticity with larger learning rate weakens or even destroys it. On the other hand, the mean firing rate curve under the influence of time delay is found to exhibit a decaying oscillatory process, which represents the emergence of multiple ISR. However, the multiple ISR phenomenon gradually weakens until it disappears with increasing noise amplitude. On the same time, synaptic plasticity with smaller learning rate also weakens this multiple ISR phenomenon, while synaptic plasticity with larger learning rate strengthens it. Furthermore, we find that changes of synaptic learning rate can induce the emergence of ISR phenomenon. We hope these obtained results would provide new insights into the study of ISR in neuroscience.展开更多
In this paper,we establish the unique determination result for inverse acoustic scattering of a penetrable obstacle with a general conductive boundary condition by using phaseless far field data at a fixed frequency.I...In this paper,we establish the unique determination result for inverse acoustic scattering of a penetrable obstacle with a general conductive boundary condition by using phaseless far field data at a fixed frequency.It is well-known that the modulus of the far field pattern is invariant under translations of the scattering obstacle if only one plane wave is used as the incident field,so it is impossible to reconstruct the location of the underlying scatterers.Based on some new research results on the impenetrable obstacle and inhomogeneous isotropic medium,we consider different types of superpositions of incident waves to break the translation invariance property.展开更多
This paper is concerned with inverse acoustic scattering in an inhomogeneous medium with a conductive boundary condition and the unknown buried impenetrable objects inside.Using a variational approach,we establish the...This paper is concerned with inverse acoustic scattering in an inhomogeneous medium with a conductive boundary condition and the unknown buried impenetrable objects inside.Using a variational approach,we establish the well-posedness of the direct problem.For the inverse problem,we shall numerically reconstruct the inhomogeneous medium from the far-field data for different kinds of cases.For the case when a Dirichlet boundary condition is imposed on the buried object,the classical factorization method proposed in[1]is justified as valid for reconstructing the inhomogeneous medium from the far-field data.For the case when a Neumann boundary condition is imposed on the buried object,the classical factorization method of[1]cannot be applied directly,since the middle operator of the factorization of the far-field operator is only compact.In this case,we develop a modified factorization method to locate the inhomogeneous medium with a conductive boundary condition and the unknown buried objects.Some numerical experiments are provided to demonstrate the practicability of the inversion algorithms developed.展开更多
The medium for next-generation communication is considered as fiber for fast,secure communication and switching capability.Mode division and space division multiplexing provide an excellent switching capability with h...The medium for next-generation communication is considered as fiber for fast,secure communication and switching capability.Mode division and space division multiplexing provide an excellent switching capability with high data transmission rate.In this work,the authors have approached an inverse modeling technique using regression-based machine learning to design a weakly coupled few-mode fiber for facilitating mode division multiplexing.The technique is adapted to predict the accurate profile parameters for the proposed few-mode fiber to obtain the maximum number of modes.It is for a three-ring-core few-mode fiber for guiding five,ten,fifteen,and twenty modes.Three types of regression models namely ordinary least-square linear multi-output regression,k-nearest neighbors of multi-output regression,and ID3 algorithm-based decision trees for multi-output regression are used for predicting the multiple profile parameters.It is observed that the ID3-based decision tree for multioutput regression is the robust,highly-accurate machine learning model for fast modeling of FMFs.The proposed fiber claims to be an efficient candidate for the next-generation 5G and 6G backhaul networks using mode division multiplexing.展开更多
Optical cavity has long been critical for a variety of applications ranging from precise measurement to spectral analysis.A number of theories and methods have been successful in describing the optical response of a s...Optical cavity has long been critical for a variety of applications ranging from precise measurement to spectral analysis.A number of theories and methods have been successful in describing the optical response of a stratified optical cavity,while the inverse problem,especially the inverse design of a displacement sensitive cavity,remains a significant challenge due to the cost of computation and comprehensive performance requirements.This paper reports a novel inverse design methodology combining the characteristic matrix method,mixed-discrete variables optimization algorithm,and Monte Carlo method-based tolerance analysis.The material characteristics are indexed to enable the mixed-discrete variables optimization,which yields considerable speed and efficiency improvements.This method allows arbitrary response adjustment with technical feasibility and gives a glimpse into the analytical characterization of the optical response.Two entirely different light-displacement responses,including an asymmetric sawtooth-like response and a highly symmetric response,are dug out and experimentally achieved,which fully confirms the validity of the method.The compact Fabry-Perot cavities have a good balance between performance and feasibility,making them promising candidates for displacement transducers.More importantly,the proposed inverse design paves the way for a universal design of optical cavities,or even nanophotonic devices.展开更多
Recently, the inverse connected p-median problem on block graphs G(V,E,w) under various cost functions, say rectilinear norm, Chebyshev norm, and bottleneck Hamming distance. Their contributions include finding a nece...Recently, the inverse connected p-median problem on block graphs G(V,E,w) under various cost functions, say rectilinear norm, Chebyshev norm, and bottleneck Hamming distance. Their contributions include finding a necessary and sufficient condition for the connected p-median problem on block graphs, developing algorithms and showing that these problems can be solved in O(n log n) time, where n is the number of vertices in the underlying block graph. Using similar technique, we show that some results are incorrect by a counter-example. Then we redefine some notations, reprove Theorem 1 and redescribe Theorem 2, Theorem 3 and Theorem 4.展开更多
基金ChinaSklochePolymerReactionEngineeringLaboratory (No .KF990 4)FujianProvincialNaturalScienceFoundationofChina(No .D0 0 10 0 0 4)
文摘After discussion on the mechanism of polymer particle nucleation and growth in inverse microemulsion polymerization, a schematic physical model for polymerization of acrylamide in inverse microemulsions was presented. Furthermore, several key problems in mathematically modeling of inverse microemulsion polymerization were pointed out.
基金the National Natural Science Foundation of China （No.20304001）.
文摘The polymerization of the inverse microemulsions composed of methyl methacrylate,acrylic acid, sodium dodecyl sulfate and water was monitored by refractometer, conductometer andtime-resolved light scattering device. The results showed that refractive index, conductivity orintensity distribution of scattered light changed along with polymerization, and different processesof polymerization could be identified.
基金supported by the NNSF of China(12261065)the NSF of Inner Mongolia(2022MS01005)+1 种基金the Basic Science Research Fund of the Universities Directly under the Inner Mongolia Autonomous Re-gion(JY20220084)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region(NMGIRT2317).
文摘In this paper,we investigate the reverse order law for Drazin inverse of three bound-ed linear operators under some commutation relations.Moreover,the Drazin invertibility of sum is also obtained for two bounded linear operators and its expression is presented.
基金The authors gratefully acknowledge the support from the National Natural Science Foundation of China(Grant No.42377174)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2022ME198)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020006).
文摘Uncertainty is an essentially challenging for safe construction and long-term stability of geotechnical engineering.The inverse analysis is commonly utilized to determine the physico-mechanical parameters.However,conventional inverse analysis cannot deal with uncertainty in geotechnical and geological systems.In this study,a framework was developed to evaluate and quantify uncertainty in inverse analysis based on the reduced-order model(ROM)and probabilistic programming.The ROM was utilized to capture the mechanical and deformation properties of surrounding rock mass in geomechanical problems.Probabilistic programming was employed to evaluate uncertainty during construction in geotechnical engineering.A circular tunnel was then used to illustrate the proposed framework using analytical and numerical solution.The results show that the geomechanical parameters and associated uncertainty can be properly obtained and the proposed framework can capture the mechanical behaviors under uncertainty.Then,a slope case was employed to demonstrate the performance of the developed framework.The results prove that the proposed framework provides a scientific,feasible,and effective tool to characterize the properties and physical mechanism of geomaterials under uncertainty in geotechnical engineering problems.
文摘This paper presents a novel sequential inverse optimal control(SIOC)method for discrete-time systems,which calculates the unknown weight vectors of the cost function in real time using the input and output of an optimally controlled discrete-time system.The proposed method overcomes the limitations of previous approaches by eliminating the need for the invertible Jacobian assumption.It calculates the possible-solution spaces and their intersections sequentially until the dimension of the intersection space decreases to one.The remaining one-dimensional vector of the possible-solution space’s intersection represents the SIOC solution.The paper presents clear conditions for convergence and addresses the issue of noisy data by clarifying the conditions for the singular values of the matrices that relate to the possible-solution space.The effectiveness of the proposed method is demonstrated through simulation results.
基金supported in part by the General Program Hunan Provincial Natural Science Foundation of 2022,China(2022JJ31022)the Undergraduate Education Reform Project of Hunan Province,China(HNJG-20210532)the National Natural Science Foundation of China(62276276)。
文摘Accurate diagnosis of apple leaf diseases is crucial for improving the quality of apple production and promoting the development of the apple industry. However, apple leaf diseases do not differ significantly from image texture and structural information. The difficulties in disease feature extraction in complex backgrounds slow the related research progress. To address the problems, this paper proposes an improved multi-scale inverse bottleneck residual network model based on a triplet parallel attention mechanism, which is built upon ResNet-50, while improving and combining the inception module and ResNext inverse bottleneck blocks, to recognize seven types of apple leaf(including six diseases of alternaria leaf spot, brown spot, grey spot, mosaic, rust, scab, and one healthy). First, the 3×3 convolutions in some of the residual modules are replaced by multi-scale residual convolutions, the convolution kernels of different sizes contained in each branch of the multi-scale convolution are applied to extract feature maps of different sizes, and the outputs of these branches are multi-scale fused by summing to enrich the output features of the images. Second, the global layer-wise dynamic coordinated inverse bottleneck structure is used to reduce the network feature loss. The inverse bottleneck structure makes the image information less lossy when transforming from different dimensional feature spaces. The fusion of multi-scale and layer-wise dynamic coordinated inverse bottlenecks makes the model effectively balances computational efficiency and feature representation capability, and more robust with a combination of horizontal and vertical features in the fine identification of apple leaf diseases. Finally, after each improved module, a triplet parallel attention module is integrated with cross-dimensional interactions among channels through rotations and residual transformations, which improves the parallel search efficiency of important features and the recognition rate of the network with relatively small computational costs while the dimensional dependencies are improved. To verify the validity of the model in this paper, we uniformly enhance apple leaf disease images screened from the public data sets of Plant Village, Baidu Flying Paddle, and the Internet. The final processed image count is 14,000. The ablation study, pre-processing comparison, and method comparison are conducted on the processed datasets. The experimental results demonstrate that the proposed method reaches 98.73% accuracy on the adopted datasets, which is 1.82% higher than the classical ResNet-50 model, and 0.29% better than the apple leaf disease datasets before preprocessing. It also achieves competitive results in apple leaf disease identification compared to some state-ofthe-art methods.
基金the Natural Science Foundation of Shandong Province of China(Grant No.ZR2022YQ06)the Development Plan of Youth Innovation Team in Colleges and Universities of Shandong Province(Grant No.2022KJ140)the Key Laboratory ofRoad Construction Technology and Equipment(Chang’an University,No.300102253502).
文摘In the past decade,notable progress has been achieved in the development of the generalized finite difference method(GFDM).The underlying principle of GFDM involves dividing the domain into multiple sub-domains.Within each sub-domain,explicit formulas for the necessary partial derivatives of the partial differential equations(PDEs)can be obtained through the application of Taylor series expansion and moving-least square approximation methods.Consequently,the method generates a sparse coefficient matrix,exhibiting a banded structure,making it highly advantageous for large-scale engineering computations.In this study,we present the application of the GFDM to numerically solve inverse Cauchy problems in two-and three-dimensional piezoelectric structures.Through our preliminary numerical experiments,we demonstrate that the proposed GFDMapproach shows great promise for accurately simulating coupled electroelastic equations in inverse problems,even with 3%errors added to the input data.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.10947170/A05 and 11104291)the Natural Science Fund for Colleges and Universities in Jiangsu Province (Grant No.10KJB140006)+2 种基金the Natural Sciences Foundation of Shanghai (Grant No.11ZR1441300)the Natural Science Foundation of Nanjing University of Posts and Telecommunications (Grant No.NY221098)the Jiangsu Qing Lan Project for their sponsorship。
文摘This paper presents a novel view of the impact of electron collision off-axis positions on the dynamic properties and relativistic nonlinear Thomson inverse scattering of excited electrons within tightly focused, circularly polarized laser pulses of varying intensities. We examine the effects of the transverse ponderomotive force, specifically how the deviation angle and speed of electron motion are affected by the initial off-axis position of the electron and the peak amplitude of the laser pulse. When the laser pulse intensity is low, an increase in the electron's initial off-axis distance results in reduced spatial radiation power, improved collimation, super-continuum phenomena generation, red-shifting of the spectrum's harmonic peak, and significant symmetry in the radiation radial direction. However, in contradiction to conventional understandings,when the laser pulse intensity is relatively high, the properties of the relativistic nonlinear Thomson inverse scattering of the electron deviate from the central axis, changing direction in opposition to the aforementioned effects. After reaching a peak, these properties then shift again, aligning with the previous direction. The complex interplay of these effects suggests a greater nuance and intricacy in the relationship between laser pulse intensity, electron position, and scattering properties than previously thought.
文摘Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights the importance of addressing race conditions in parallel image processing, specifically focusing on color inverse filtering using OpenMP. We considered three solutions to solve race conditions, each with distinct characteristics: #pragma omp atomic: Protects individual memory operations for fine-grained control. #pragma omp critical: Protects entire code blocks for exclusive access. #pragma omp parallel sections reduction: Employs a reduction clause for safe aggregation of values across threads. Our findings show that the produced images were unaffected by race condition. However, it becomes evident that solving the race conditions in the code makes it significantly faster, especially when it is executed on multiple cores.
文摘In this paper, the inverse spectral problem of Sturm-Liouville operator with boundary conditions and jump conditions dependent on the spectral parameter is investigated. Firstly, the self-adjointness of the problem and the eigenvalue properties are given, then the asymptotic formulas of eigenvalues and eigenfunctions are presented. Finally, the uniqueness theorems of the corresponding inverse problems are given by Weyl function theory and inverse spectral data approach.
基金supported by National Natural Science Foundation(Grant Nos.41875164 and 92044303)。
文摘In recent years,China has implemented several measures to improve air quality.The Beijing-Tianjin-Hebei(BTH)region is one area that has suffered from the most serious air pollution in China and has undergone huge changes in air quality in the past few years.How to scientifically assess these change processes remain the key issue in further improving the air quality over this region in the future.To evaluate the changes in major air pollutant emissions over this region,this paper employs ensemble Kalman filtering(EnKF)for integrating the national ground monitoring pollutant observation data and the Nested Air Quality Prediction Modeling System(NAQPMS)simulation data to inversely estimate the emission rates of SO_(2),NOX,CO,and primary PM_(2.5)over BTH region in February from 2014 to 2019.The results show that SO_(2),NOX,CO,and primary PM_(2.5)emissions in the BTH region decreased in February from 2014 to 2019 by 83%,37%,41%,and 42%,while decreases in Beijing during this period were 86%,67%,59%,and 65%,respectively.Compared with the prior emission inventory,the inversion emission inventory reduces the uncertainty of multi-pollutant simulation in the BTH region,with simulated root mean square errors of the monthly average concentrations of SO_(2),NOX,PM_(2.5),and CO reduced by 41%,30%,31%,and 22%,respectively.The average uncertainties of SO_(2),NOX,PM_(2.5),and CO inversion emissions in2014-19 are±14.03%yr^(-1),±28.91%yr^(-1),±126.15%yr^(-1),and±43.58%yr^(-1).Compared with the uncertainty of MEIC emission,the uncertainties of all species changed by+2%yr^(-1),-2%yr^(-1),-26%yr^(-1),and-4%yr^(-1),respectively.The spatial distribution results illustrate that air pollutant emissions are mainly distributed over the eastern and southern BTH regions.The spatial gap between the inversion emissions and MEIC emissions was further closed in 2019 compared to 2014.The results of this paper can provide a new reference for assessing changes in air pollution emissions over the BTH region in recent years and validating a bottom-up emission inventory.
基金supported from the Major Key Project of PCLthe National Talent Program。
文摘Inverse design focuses on identifying photonic structures to optimize the performance of photonic devices.Conventional scalar-based inverse design approaches are insufficient to design photonic devices of anisotropic materials such as lithium niobate(LN).To the best of our knowledge,this work proposes for the first time the inverse design method for anisotropic materials to optimize the structure of anisotropic-material based photonics devices.Specifically,the orientation dependent properties of anisotropic materials are included in the adjoint method,which provides a more precise prediction of light propagation within such materials.The proposed method is used to design ultra-compact wavelength division demultiplexers in the X-cut thin-film lithium niobate(TFLN)platform.By benchmarking the device performances of our method with those of classical scalar-based inverse design,we demonstrate that this method properly addresses the critical issue of material anisotropy in the X-cut TFLN platform.This proposed method fills the gap of inverse design of anisotropic materials based photonic devices,which finds prominent applications in TFLN platforms and other anisotropicmaterial based photonic integration platforms.
基金supported by the National Natural Science Foundation of China(Grant No.11875047)。
文摘Thermal metamaterials offer a promising avenue for creating artificial materials with unconventional physical properties,such as thermal cloak,concentrator,rotator,and illusion.However,designs and fabrication of thermal metamaterials are of challenge due to the limitations of existing methods on anisotropic material properties.We propose an evolutionary framework for designing thermal metamaterials using genetic algorithm optimization.Our approach encodes unit cells with different thermal conductivities and performs global optimization using the evolution-inspired operators.We further fabricate the thermal functional cells using 3D printing and verify their thermal illusion functionality experimentally.Our study introduces a new design paradigm for advanced thermal metamaterials that can manipulate heat flows robustly and realize functional thermal metadevices without anisotropic thermal conductivity.Our approach can be easily applied to fabrications in various fields such as thermal management and thermal sensing.
基金This work was supported by the National Key R&D Program of China(2022YFB3204300)the Zhejiang Provincial Key R&D Program of China(2022C01002)the National Major Scientific Research Instrument Development Project(81827804).
文摘Objective:The objective of this work is to investigate the mapping relationship between transcranial ultrasound image quality and transcranial acoustic metamaterial parameters using inverse design methods.Impact Statement:Our study provides insights into inverse design methods and opens the route to guide the preparation of transcranial acoustic metamaterials.Introduction:The development of acoustic metamaterials has enabled the exploration of cranial ultrasound,and it has been found that the influence of the skull distortion layer on acoustic waves can be effectively eliminated by adjusting the parameters of the acoustic metamaterial.However,the interaction mechanism between transcranial ultrasound images and transcranial acoustic metamaterial parameters is unknown.Methods:In this study,1,456 transcranial ultrasound image datasets were used to explore the mapping relationship between the quality of transcranial ultrasound images and the parameters of transcranial acoustic metamaterials.Results:The multioutput parameter prediction model of transcranial metamaterials based on deep back-propagation neural network was built,and metamaterial parameters under transcranial image evaluation indices are predicted using the prediction model.Conclusion:This inverse big data design approach paves the way for guiding the preparation of transcranial metamaterials.
基金the National Natural Science Foundation of China(Grant No.11972217).
文摘This work explores the inverse stochastic resonance(ISR) induced by bounded noise and the multiple inverse stochastic resonance induced by time delay by constructing a modular neural network, where the modified Oja’s synaptic learning rule is employed to characterize synaptic plasticity in this network. Meanwhile, the effects of synaptic plasticity on the ISR dynamics are investigated. Through numerical simulations, it is found that the mean firing rate curve under the influence of bounded noise has an inverted bell-like shape, which implies the appearance of ISR. Moreover, synaptic plasticity with smaller learning rate strengthens this ISR phenomenon, while synaptic plasticity with larger learning rate weakens or even destroys it. On the other hand, the mean firing rate curve under the influence of time delay is found to exhibit a decaying oscillatory process, which represents the emergence of multiple ISR. However, the multiple ISR phenomenon gradually weakens until it disappears with increasing noise amplitude. On the same time, synaptic plasticity with smaller learning rate also weakens this multiple ISR phenomenon, while synaptic plasticity with larger learning rate strengthens it. Furthermore, we find that changes of synaptic learning rate can induce the emergence of ISR phenomenon. We hope these obtained results would provide new insights into the study of ISR in neuroscience.
文摘In this paper,we establish the unique determination result for inverse acoustic scattering of a penetrable obstacle with a general conductive boundary condition by using phaseless far field data at a fixed frequency.It is well-known that the modulus of the far field pattern is invariant under translations of the scattering obstacle if only one plane wave is used as the incident field,so it is impossible to reconstruct the location of the underlying scatterers.Based on some new research results on the impenetrable obstacle and inhomogeneous isotropic medium,we consider different types of superpositions of incident waves to break the translation invariance property.
基金supported by the National Natural ScienceFoundation of China Grant(11871416,12171057)the Natural Science Foundation of Shandong Province Grant(ZR2019MA027)。
文摘This paper is concerned with inverse acoustic scattering in an inhomogeneous medium with a conductive boundary condition and the unknown buried impenetrable objects inside.Using a variational approach,we establish the well-posedness of the direct problem.For the inverse problem,we shall numerically reconstruct the inhomogeneous medium from the far-field data for different kinds of cases.For the case when a Dirichlet boundary condition is imposed on the buried object,the classical factorization method proposed in[1]is justified as valid for reconstructing the inhomogeneous medium from the far-field data.For the case when a Neumann boundary condition is imposed on the buried object,the classical factorization method of[1]cannot be applied directly,since the middle operator of the factorization of the far-field operator is only compact.In this case,we develop a modified factorization method to locate the inhomogeneous medium with a conductive boundary condition and the unknown buried objects.Some numerical experiments are provided to demonstrate the practicability of the inversion algorithms developed.
文摘The medium for next-generation communication is considered as fiber for fast,secure communication and switching capability.Mode division and space division multiplexing provide an excellent switching capability with high data transmission rate.In this work,the authors have approached an inverse modeling technique using regression-based machine learning to design a weakly coupled few-mode fiber for facilitating mode division multiplexing.The technique is adapted to predict the accurate profile parameters for the proposed few-mode fiber to obtain the maximum number of modes.It is for a three-ring-core few-mode fiber for guiding five,ten,fifteen,and twenty modes.Three types of regression models namely ordinary least-square linear multi-output regression,k-nearest neighbors of multi-output regression,and ID3 algorithm-based decision trees for multi-output regression are used for predicting the multiple profile parameters.It is observed that the ID3-based decision tree for multioutput regression is the robust,highly-accurate machine learning model for fast modeling of FMFs.The proposed fiber claims to be an efficient candidate for the next-generation 5G and 6G backhaul networks using mode division multiplexing.
基金We are grateful for financial supports from National Natural Science Foundation of China(62004166)Natural Science Foundation of Ningbo(202003N4062)+2 种基金National Postdoctoral Program for Innovative Talents(BX20200279)Natural Science Basic Research Program of Shaanxi Province(2020JQ-199)Fundamental Research Funds for the Central Universities(31020190QD027).
文摘Optical cavity has long been critical for a variety of applications ranging from precise measurement to spectral analysis.A number of theories and methods have been successful in describing the optical response of a stratified optical cavity,while the inverse problem,especially the inverse design of a displacement sensitive cavity,remains a significant challenge due to the cost of computation and comprehensive performance requirements.This paper reports a novel inverse design methodology combining the characteristic matrix method,mixed-discrete variables optimization algorithm,and Monte Carlo method-based tolerance analysis.The material characteristics are indexed to enable the mixed-discrete variables optimization,which yields considerable speed and efficiency improvements.This method allows arbitrary response adjustment with technical feasibility and gives a glimpse into the analytical characterization of the optical response.Two entirely different light-displacement responses,including an asymmetric sawtooth-like response and a highly symmetric response,are dug out and experimentally achieved,which fully confirms the validity of the method.The compact Fabry-Perot cavities have a good balance between performance and feasibility,making them promising candidates for displacement transducers.More importantly,the proposed inverse design paves the way for a universal design of optical cavities,or even nanophotonic devices.
文摘Recently, the inverse connected p-median problem on block graphs G(V,E,w) under various cost functions, say rectilinear norm, Chebyshev norm, and bottleneck Hamming distance. Their contributions include finding a necessary and sufficient condition for the connected p-median problem on block graphs, developing algorithms and showing that these problems can be solved in O(n log n) time, where n is the number of vertices in the underlying block graph. Using similar technique, we show that some results are incorrect by a counter-example. Then we redefine some notations, reprove Theorem 1 and redescribe Theorem 2, Theorem 3 and Theorem 4.
