Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effe...Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.展开更多
With the depletion of fossil fuels and the demand for high-performance energy storage devices,solidstate lithium metal batteries have received widespread attention due to their high energy density and safety advantage...With the depletion of fossil fuels and the demand for high-performance energy storage devices,solidstate lithium metal batteries have received widespread attention due to their high energy density and safety advantages.Among them,the earliest developed organic solid-state polymer electrolyte has a promising future due to its advantages such as good mechanical flexibility,but its poor ion transport performance dramatically limits its performance improvement.Therefore,single-ion conducting polymer electrolytes(SICPEs)with high lithium-ion transport number,capable of improving the concentration polarization and inhibiting the growth of lithium dendrites,have been proposed,which provide a new direction for the further development of high-performance organic polymer electrolytes.In view of this,lithium ions transport mechanisms and design principles in SICPEs are summarized and discussed in this paper.The modification principles currently used can be categorized into the following three types:enhancement of lithium salt anion-polymer interactions,weakening of lithium salt anion-cation interactions,and modulation of lithium ion-polymer interactions.In addition,the advances in single-ion conductors of conventional and novel polymer electrolytes are summarized,and several typical highperformance single-ion conductors are enumerated and analyzed in what way they improve ionic conductivity,lithium ions mobility,and the ability to inhibit lithium dendrites.Finally,the advantages and design methodology of SICPEs are summarized again and the future directions are outlined.展开更多
To attain the objectives of carbon peaking and carbon neutrality,the development of stable and highperformance ion-conducting materials holds enormous relevance in various energy storage and conversion devices.Particu...To attain the objectives of carbon peaking and carbon neutrality,the development of stable and highperformance ion-conducting materials holds enormous relevance in various energy storage and conversion devices.Particularly,crystalline porous materials possessing built-in ordered nanochannels exhibit remarkable superiority in comprehending the ion transfer mechanisms with precision.In this regard,covalent organic frameworks(COFs)are highly regarded as a promising alternative due to their preeminent structural tunability,accessible well-defined pores,and excellent thermal/chemical stability under hydrous/anhydrous conditions.By the availability of organic units and the diversity of topologies and connections,advances in COFs have been increasing rapidly over the last decade and they have emerged as a new field of proton-conducting materials.Therefore,a comprehensive summary and discussion are urgently needed to provide an"at a glance"understanding of the prospects and challenges in the development of proton-conducting COFs.In this review,we target a comprehensive review of COFs in the field of proton conductivity from the aspects of design strategies,the proton conducting mechanism/features,the relationships of structure-function,and the application of research.The relevant content of theoretical simulation,advanced structural characterizations,prospects,and challenges are also presented elaborately and critically.More importantly,we sincerely hope that this progress report will form a consistent view of this field and provide inspiration for future research.展开更多
Transparent conducting F-doped texture SnO2 films with resistivity as low as 5× 10-4 Ω ·cm,with carrier concentrations between 3.5 × 1020 and 7× 1020 cm-3 and Hall mobilities from 15.7 to 20.1 cm2...Transparent conducting F-doped texture SnO2 films with resistivity as low as 5× 10-4 Ω ·cm,with carrier concentrations between 3.5 × 1020 and 7× 1020 cm-3 and Hall mobilities from 15.7 to 20.1 cm2/(V/s) have been prepared by atmosphere pressure chemical vapour deposition (APCVD). These polycrystalline films possess a variable preferred orientation, the polycrystallite sizes and orientations vary with substrate temperature. The substrate temperature and fluorine flow rate dependence of conductivity, Hall mobility and carrier conentration fOr the resultingfilms have been obtained. The temperature dependence of the mobiity and carrier concentrationhave been measured over a temperature range 16～400 K. A systematically theoretical analysis on scattering mechanisms for the highly conductive SnO2 films has been given. Both theoretical analysis and experimental results indicate that for these degenerate, polycrystalline SnO2 ：F films in the low temperature range (below 100 K), ionized impurity scattering is main scattering mechanism. However, when the temperature is higher than 100 K, the lattice vibration scattering becomes dominant. The grain boundary scattering makes a small contribution to limit the mobility of the films.展开更多
Na<sub>5+x</sub>YAl<sub>x</sub>Si<sub>4-x</sub>O<sub>12</sub> superionic conductors arerhombohedral R3c space group.Their structures arecharacterized by(Al<sub>x/4...Na<sub>5+x</sub>YAl<sub>x</sub>Si<sub>4-x</sub>O<sub>12</sub> superionic conductors arerhombohedral R3c space group.Their structures arecharacterized by(Al<sub>x/4</sub>Si<sub>1-x/4</sub>)O<sub>4</sub> tetrahedra linked toform puckered(Al<sub>3x</sub>Si<sub>4-x</sub>)<sub>4</sub>O<sub>35</sub> rings parallel to thebasal plane of the hexagonal cell.These rings,separated by parts of sodium oxygen polyhedron,arestacked to form large rigid colums parallel to c axis.The columns are linked by[YO<sub>6</sub>]octahedra to form athree-dimensional Framework with large channels betweenthe rings.Parts of Na ions located in the cores of thecolumns are movable.In terms of the conductionmechanism,the concentration of conducting Na<sup>+</sup> ions wascarried out and compared with the experimental results.It was found that the theoretical values accord withthe experimental results.展开更多
The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of...The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.展开更多
As global warming intensifies, researchers worldwide strive to develop effective ways to reduce heat transfer. Among the natural fiber composites studied extensively in recent decades, bamboo has emerged as a prime ca...As global warming intensifies, researchers worldwide strive to develop effective ways to reduce heat transfer. Among the natural fiber composites studied extensively in recent decades, bamboo has emerged as a prime candidate for reinforcement. This woody plant offers inherent strengths, biodegradability, and abundant availability. Due to its high cellulose content, its low thermal conductivity establishes bamboo as a thermally resistant material. Its low thermal conductivity, enhanced by a NaOH solution treatment, makes it an excellent thermally resistant material. Researchers incorporated Hollow Glass Microspheres (HGM) and Kaolin fillers into the epoxy matrix to improve the insulating properties of bamboo composites. These fillers substantially enhance thermal resistance, limiting heat transfer. Various compositions, like (30% HGM + 25% Bamboo + 65% Epoxy) and (30% Kaolin + 25% Bamboo + 45% Epoxy), were compared to identify the most efficient thermal insulator. Using Vacuum Assisted Resin Transfer Molding (VARTM) ensures uniform distribution of fillers and resin, creating a structurally sound thermal barrier. These reinforced composites, evaluated using the TOPSIS method, demonstrated their potential as high-performance materials combating heat transfer, offering a promising solution in the battle against climate change.展开更多
The electrical conductivities of single-crystal K-feldspar along three different crystallographic directions are investigated by the Solartron-1260 Impedance/Gain-phase analyzer at 873 K–1223 K and 1.0 GPa–3.0 GPa i...The electrical conductivities of single-crystal K-feldspar along three different crystallographic directions are investigated by the Solartron-1260 Impedance/Gain-phase analyzer at 873 K–1223 K and 1.0 GPa–3.0 GPa in a frequency range of 10-1 Hz–106 Hz. The measured electrical conductivity along the ⊥ [001] axis direction decreases with increasing pressure, and the activation energy and activation volume of charge carriers are determined to be 1.04 ± 0.06 e V and 2.51 ± 0.19 cm^3/mole, respectively. The electrical conductivity of K-feldspar is highly anisotropic, and its value along the⊥ [001] axis is approximately three times higher than that along the ⊥ [100] axis. At 2.0 GPa, the diffusion coefficient of ionic potassium is obtained from the electrical conductivity data using the Nernst–Einstein equation. The measured electrical conductivity and calculated diffusion coefficient of potassium suggest that the main conduction mechanism is of ionic conduction, therefore the dominant charge carrier is transferred between normal lattice potassium positions and adjacent interstitial sites along the thermally activated electric field.展开更多
Polyvinylpyrrolidone-reduced graphene oxide was prepared by modified hummers method and was used as adsorbent for removing Cu ions from wastewater. The effects of contact time and ions concentration on adsorption capa...Polyvinylpyrrolidone-reduced graphene oxide was prepared by modified hummers method and was used as adsorbent for removing Cu ions from wastewater. The effects of contact time and ions concentration on adsorption capacity were examined. The maximum adsorption capacity of 1689 mg/g was observed at an initial p H value of 3.5 after agitating for 10 min. It was demonstrated that polyvinylpyrrolidone-reduced graphene oxide had a huge adsorption capacity for Cu ions, which was 10 times higher than maximal value reported in previous works. The adsorption mechanism was also discussed by density functional theory. It demonstrates that Cu ions are attracted to surface of reduced graphene oxide by C atoms in reduced graphene oxide modified by polyvinylpyrrolidone through physisorption processes, which may be responsible for the higher adsorption capacity. Our results suggest that polyvinylpyrrolidone-reduced graphene oxide is an effective adsorbent for removing Cu ions in wastewater. It also provides a new way to improve the adsorption capacity of reduced graphene oxide for dealing with the heavy metal ion in wastewater.展开更多
Effective thermal management is quite urgent for electronics owing to their ever-growing integration degree,operation frequency and power density,and the main strategy of thermal management is to remove excess energy ...Effective thermal management is quite urgent for electronics owing to their ever-growing integration degree,operation frequency and power density,and the main strategy of thermal management is to remove excess energy from electronics to outside by thermal conductive materials.Compared to the conventional thermal management materials,flexible thermally conductive films with high in-plane thermal conductivity,as emerging candidates,have aroused greater interest in the last decade,which show great potential in thermal management applications of next-generation devices.However,a comprehensive review of flexible thermally conductive films is rarely reported.Thus,we review recent advances of both intrinsic polymer films and polymer-based composite films with ultrahigh in-plane thermal conductivity,with deep understandings of heat transfer mechanism,processing methods to enhance thermal conductivity,optimization strategies to reduce interface thermal resistance and their potential applications.Lastly,challenges and opportunities for the future development of flexible thermally conductive films are also discussed.展开更多
Aqueous Zinc-ion batteries(ZIB) are attracting immense attention because of their merits of excellent safety and quite cheap properties compared with lithium-ion batteries(LIB).Manganese oxide is one of the most impor...Aqueous Zinc-ion batteries(ZIB) are attracting immense attention because of their merits of excellent safety and quite cheap properties compared with lithium-ion batteries(LIB).Manganese oxide is one of the most important cathode materials of ZIB.In this paper,α-Mn2O3 used as cathode of ZIB is synthesized via Metal-Organic Framework(MOF)-derived method,which delivers a high specific capacity of225 mAh g^(-1) at 0.05 A g^(-1) and 92.7 mAh g^(-1) after 1700 cycles at 2 A g^(-1).The charge storage mechanism of α-Mn2O3 cathode is found to greatly depend on the discharge current density.At lower current density discharging,the H+ and Zn2+ are successively intercalated into the α-Mn2O3 before and after the "turning point" of discharge voltage and their discharging products present obviously different morphologies changing from flower-like to large plate-like products.At a higher current density,the low-voltage plateau after the turning point disappears due to the decrease of amount of Zn2+ intercalation and the H+intercalation is dominated in α-Mn2 O3.This study provides significant understanding for future design and research of high-performance Mn-based cathodes of ZIB.展开更多
The microstmcture and conductive mechanism of high density polyethylene/carbon black (HDPE/CB) composite were investigated by positron annihilation lifetime spectroscopy (PALS). The PALS were measured in two series of...The microstmcture and conductive mechanism of high density polyethylene/carbon black (HDPE/CB) composite were investigated by positron annihilation lifetime spectroscopy (PALS). The PALS were measured in two series of samples,one with various CB contents in the composites and the other with various γ-irradiation doses in HDPE/CB composite containing 20 wt% CB. It was found that CB particles distribute in the amorphous regions, the CB critical content value in HDPE/CB composite is about 16.7 wt% and the suitable γ-irradiation dose for improving the conductive behavior of HDPE/CB composite is about 20 Mrad. The result observed for the second set of samples suggests that γ-irradiation causes not only cross-linking in amorphous regions but also destruction of the partial crystalline structure. Therefore, a suitable irradiation dose, about 20 Mrad, can induce sufficient cross-linking in the amorphous regions without enhancing the decomposition of crystalline structure, so that the positive temperature coefficient (PTC) effect remains while the negative temperature coefficient (NTC) effect is suppressed. A new interpretation of the conductive mechanism, which might provide a more detailed explanation of the PTC effect and the NTC effect has been proposed.展开更多
Porous core–shell CoMn_2O_4 microspheres of ca. 3–5 μm in diameter were synthesized and served as anode of lithium ion battery. Results demonstrate that the as-synthesized CoMn_2O_4 materials exhibit excellent elec...Porous core–shell CoMn_2O_4 microspheres of ca. 3–5 μm in diameter were synthesized and served as anode of lithium ion battery. Results demonstrate that the as-synthesized CoMn_2O_4 materials exhibit excellent electrochemical properties. The CoMn_2O_4 anode can deliver a large capacity of 1070 mAh g^(–1) in the first discharge, a reversible capacity of 500 mAh g^(–1) after 100 cycles with a coulombic efficiency of 98.5%at a charge–discharge current density of 200 mA g^(–1), and a specific capacity of 385 mAh g^(–1) at a much higher charge-discharge current density of 1600 mA g^(–1). Synchrotron X–ray absorption fine structure(XAFS) techniques were applied to investigate the conversion reaction mechanism of the CoMn_2O_4 anode.The X–ray absorption near edge structure(XANES) spectra revealed that, in the first discharge–charge cycle, Co and Mn in CoMn_2O_4 were reduced to metallic Co and Mn when the electrode was discharged to 0.01 V, while they were oxidized respectively to CoO and MnO when the electrode was charged to 3.0 V.Experiments of both XANES and extended X–ray absorption fine structure(EXAFS) revealed that neither valence evolution nor phase transition of the porous core–shell CoMn_2O_4 microspheres could happen in the discharge plateau from 0.8 to 0.6 V, which demonstrates the formation of solid electrolyte interface(SEI) on the anode.展开更多
Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_...Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.展开更多
The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH...The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and different initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non-linear Langmuir isotherm for chitosan, chitosan-GLA and chitosan-alginate beads in single metal system were 34.98, 14.24 and 60.27 mg/g, respectively. However, the adsorption capacity of Pb(II) ions were reduced in the binary metal system due to the competitive adsorption between Pb(II) and Cu(II) ions. Based on the ion exchange study, the release of Ca2+, Mg2+, K+ and Na+ ions played an important role in the adsorption of Pb(II) ions by all three adsorbents but only at lower concentrations of Pb(II) ions. Infrared spectra showed that the binding between Pb(II) ions and the adsorbents involved mostly the nitrogen and oxygen atoms. All three adsorbents showed satisfactory adsorption capacities and can be considered as an efficient adsorbent for the removal of Pb(II) ions from aqueous solutions.展开更多
High-performance lithium ion capacitors(LICs) have been seriously hindered by the very low capacity and unclear capacitive mechanism of carbon cathode.Herein,after the combination of experimental results and theoretic...High-performance lithium ion capacitors(LICs) have been seriously hindered by the very low capacity and unclear capacitive mechanism of carbon cathode.Herein,after the combination of experimental results and theoretical calculations,it is found that the critical pore size of 0.8 nm for PF_6~-ion adsorption decreases strong interactive repulsion of electrons and largely reduces adsorption energy barrier,which greatly improves the charge accommodation capacity in electrical double-layer behavior.Most importantly,the chemical-bond evolution process of C=O group has been firstly revealed by X-ray photoelectron spectroscopy(XPS),indicating that the introduction of C=O group can provide abundant redox active sites for PF_6~-ion adsorption accompanied with enhanced pseudocapacitive capacity.Attributed to the synergistic effect of dual capacitive mechanism,porous carbon sheet(PCS) cathode shows a reversible specific capacity of 53.6 mAh g^(-1) even at a high current density of 50 A g^(-1).Significantly,the quasisolid-state LIC manifests state-of-the-art electrochemical performances with an integrated maximum energy density of 163 Wh kg^(-1) and an outstanding power density of 15,000 W kg^(-1).This elaborate work promotes better fundamental understanding about capacitive mechanism of PF_6~-ion and offers a rational dual-capacitive strategy for the design of advanced carbon cathodes.展开更多
The microstructures of precursors strongly affect the electrochemical performance of Ni-rich layerstructured cathode materials.In this study,the growth behaviour of Ni_(0.815)Co_(0.15)Al_(0.035)(OH)_2(NCA) prepared vi...The microstructures of precursors strongly affect the electrochemical performance of Ni-rich layerstructured cathode materials.In this study,the growth behaviour of Ni_(0.815)Co_(0.15)Al_(0.035)(OH)_2(NCA) prepared via the ammonia complexation precipitation method in a 50-L-volume continuously stirred tank reactor(CSTR) is studied in detail.The growth of Ni(OH)2-based hydroxide can be divided into a nucleation process,an agglomeration growth process,a process in which multiple growth mechanisms coexist,and an interface growth process over time,while the inner structure of the CSTR can be divided into a nucleation zone,a complex dissolution zone,a growth zone,and a maturation zone.The concentration of ammonium ions affects the growth habit of the primary crystal significantly due to its specific adsorption on the electronegative crystal plane.When the ammonia concentration is <1.5 mol L^(-1) at 60℃ at pH=11.5,the precursors grow preferentially along the(1 0 1) crystal plane,whereas they grow preferentially along the(0 0 1) crystal plane when the concentration is >2.0 mol L^(-1).The LiNi_(0.815)Co_(0.15)Al_(0.035)O_2 materials inherit the grain structure of the precursor.Materials prepared from precursors with(1 0 1)preferential primary particles show a higher specific capacity and better rate performance than those that were prepared from(0 0 1) preferential primary particles,but the latter realize a better cycling performance than the former.展开更多
Aqueous rechargeable Zn/MnO2 zinc-ion batteries(ZIBs)are reviving recently due to their low cost,non-toxicity,and natural abundance.However,their energy storage mechanism remains controversial due to their complicated...Aqueous rechargeable Zn/MnO2 zinc-ion batteries(ZIBs)are reviving recently due to their low cost,non-toxicity,and natural abundance.However,their energy storage mechanism remains controversial due to their complicated electrochemical reactions.Meanwhile,to achieve satisfactory cyclic stability and rate performance of the Zn/MnO2 ZIBs,Mn2+ is introduced in the electrolyte(e.g.,ZnSO4 solution),which leads to more complicated reactions inside the ZIBs systems.Herein,based on comprehensive analysis methods including electrochemical analysis and Pourbaix diagram,we provide novel insights into the energy storage mechanism of Zn/MnO2 batteries in the presence of Mn2+.A complex series of electrochemical reactions with the coparticipation of Zn2+,H+,Mn2+,SO42-,and OH-were revealed.During the first discharge process,co-insertion of Zn2+ and H+ promotes the transformation of MnO2 into ZnxMnO4,MnOOH,and Mn2O3,accompanying with increased electrolyte pH and the formation of ZnSO4·3 Zn(OH)2-5 H2O.During the subsequent charge process,ZnxMnO4,MnOOH,and Mn2O3 revert to a-MnO2 with the extraction of Zn2+ and H+,while ZnSO4·3Zn(OH)2·5H2O reacts with Mn2+ to form ZnMn3O7·3 H2O.In the following charge/discharge processes,besides aforementioned electrochemical reactions,Zn2+ reversibly insert into/extract from α-MnO2,ZnxMnO4,and ZnMn3O7·3H2O hosts;ZnSO4·3Zn(OH)2·5 H2O,Zn2Mn3O8,and ZnMn2O4 convert mutually with the participation of Mn2+.This work is believed to provide theoretical guidance for further research on high-performance ZIBs.展开更多
A single-factor experiment of copper ion adsorption on pure palygorskite was carried out to understand the Cu2+ sorption of palygorskite—an important clay mineral in soil and sedimentary rock. In addition, pH of the ...A single-factor experiment of copper ion adsorption on pure palygorskite was carried out to understand the Cu2+ sorption of palygorskite—an important clay mineral in soil and sedimentary rock. In addition, pH of the solution and the surface microstructure of palygorskite were investigated before and after adsorption. The experimental results indicated that efficiency of Cu2+ removal was related to the oscillation rate of the specimen shaker, sorption time, initial pH value and the amount of adsorbent added. Palygorskite induced Cu2+ hydrolysis and interaction between copper hydroxide colloids and palygorskite surfaces, as observed with transmission electron microscopy (TEM), were the main contributions to palygorskite removal of Cu2+. This mechanism was different from adsorption at the mineral-water interface. It was proposed that surface hydrolysis of palygorskite raised the alkalinity of the palygorskite-water interface and suspension system. Thus, the induced pH of the solution was then high enough for Cu2+ hydrolysis on the mineral surface and in solution.展开更多
基金the National Natural Science Foundation of China(Nos.22209095 and 22238004).
文摘Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.
基金supported by the National Natural Science Foundation of China(51973157,51873152)Project funded by the China Postdoctoral Science Foundation(2022M711959)State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘With the depletion of fossil fuels and the demand for high-performance energy storage devices,solidstate lithium metal batteries have received widespread attention due to their high energy density and safety advantages.Among them,the earliest developed organic solid-state polymer electrolyte has a promising future due to its advantages such as good mechanical flexibility,but its poor ion transport performance dramatically limits its performance improvement.Therefore,single-ion conducting polymer electrolytes(SICPEs)with high lithium-ion transport number,capable of improving the concentration polarization and inhibiting the growth of lithium dendrites,have been proposed,which provide a new direction for the further development of high-performance organic polymer electrolytes.In view of this,lithium ions transport mechanisms and design principles in SICPEs are summarized and discussed in this paper.The modification principles currently used can be categorized into the following three types:enhancement of lithium salt anion-polymer interactions,weakening of lithium salt anion-cation interactions,and modulation of lithium ion-polymer interactions.In addition,the advances in single-ion conductors of conventional and novel polymer electrolytes are summarized,and several typical highperformance single-ion conductors are enumerated and analyzed in what way they improve ionic conductivity,lithium ions mobility,and the ability to inhibit lithium dendrites.Finally,the advantages and design methodology of SICPEs are summarized again and the future directions are outlined.
基金financial support from the National Natural Science Foundation of China(21978024)the Beijing Natural Science Foundation(2202034)。
文摘To attain the objectives of carbon peaking and carbon neutrality,the development of stable and highperformance ion-conducting materials holds enormous relevance in various energy storage and conversion devices.Particularly,crystalline porous materials possessing built-in ordered nanochannels exhibit remarkable superiority in comprehending the ion transfer mechanisms with precision.In this regard,covalent organic frameworks(COFs)are highly regarded as a promising alternative due to their preeminent structural tunability,accessible well-defined pores,and excellent thermal/chemical stability under hydrous/anhydrous conditions.By the availability of organic units and the diversity of topologies and connections,advances in COFs have been increasing rapidly over the last decade and they have emerged as a new field of proton-conducting materials.Therefore,a comprehensive summary and discussion are urgently needed to provide an"at a glance"understanding of the prospects and challenges in the development of proton-conducting COFs.In this review,we target a comprehensive review of COFs in the field of proton conductivity from the aspects of design strategies,the proton conducting mechanism/features,the relationships of structure-function,and the application of research.The relevant content of theoretical simulation,advanced structural characterizations,prospects,and challenges are also presented elaborately and critically.More importantly,we sincerely hope that this progress report will form a consistent view of this field and provide inspiration for future research.
文摘Transparent conducting F-doped texture SnO2 films with resistivity as low as 5× 10-4 Ω ·cm,with carrier concentrations between 3.5 × 1020 and 7× 1020 cm-3 and Hall mobilities from 15.7 to 20.1 cm2/(V/s) have been prepared by atmosphere pressure chemical vapour deposition (APCVD). These polycrystalline films possess a variable preferred orientation, the polycrystallite sizes and orientations vary with substrate temperature. The substrate temperature and fluorine flow rate dependence of conductivity, Hall mobility and carrier conentration fOr the resultingfilms have been obtained. The temperature dependence of the mobiity and carrier concentrationhave been measured over a temperature range 16～400 K. A systematically theoretical analysis on scattering mechanisms for the highly conductive SnO2 films has been given. Both theoretical analysis and experimental results indicate that for these degenerate, polycrystalline SnO2 ：F films in the low temperature range (below 100 K), ionized impurity scattering is main scattering mechanism. However, when the temperature is higher than 100 K, the lattice vibration scattering becomes dominant. The grain boundary scattering makes a small contribution to limit the mobility of the films.
文摘Na<sub>5+x</sub>YAl<sub>x</sub>Si<sub>4-x</sub>O<sub>12</sub> superionic conductors arerhombohedral R3c space group.Their structures arecharacterized by(Al<sub>x/4</sub>Si<sub>1-x/4</sub>)O<sub>4</sub> tetrahedra linked toform puckered(Al<sub>3x</sub>Si<sub>4-x</sub>)<sub>4</sub>O<sub>35</sub> rings parallel to thebasal plane of the hexagonal cell.These rings,separated by parts of sodium oxygen polyhedron,arestacked to form large rigid colums parallel to c axis.The columns are linked by[YO<sub>6</sub>]octahedra to form athree-dimensional Framework with large channels betweenthe rings.Parts of Na ions located in the cores of thecolumns are movable.In terms of the conductionmechanism,the concentration of conducting Na<sup>+</sup> ions wascarried out and compared with the experimental results.It was found that the theoretical values accord withthe experimental results.
基金the Fundamental Research Funds for the Central Universities(Grant No.30920041102)National Natural Science Foundation of China(Grant No.11802134).
文摘The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.
文摘As global warming intensifies, researchers worldwide strive to develop effective ways to reduce heat transfer. Among the natural fiber composites studied extensively in recent decades, bamboo has emerged as a prime candidate for reinforcement. This woody plant offers inherent strengths, biodegradability, and abundant availability. Due to its high cellulose content, its low thermal conductivity establishes bamboo as a thermally resistant material. Its low thermal conductivity, enhanced by a NaOH solution treatment, makes it an excellent thermally resistant material. Researchers incorporated Hollow Glass Microspheres (HGM) and Kaolin fillers into the epoxy matrix to improve the insulating properties of bamboo composites. These fillers substantially enhance thermal resistance, limiting heat transfer. Various compositions, like (30% HGM + 25% Bamboo + 65% Epoxy) and (30% Kaolin + 25% Bamboo + 45% Epoxy), were compared to identify the most efficient thermal insulator. Using Vacuum Assisted Resin Transfer Molding (VARTM) ensures uniform distribution of fillers and resin, creating a structurally sound thermal barrier. These reinforced composites, evaluated using the TOPSIS method, demonstrated their potential as high-performance materials combating heat transfer, offering a promising solution in the battle against climate change.
基金Project supported by the Strategic Priority Research Program(B)of the Chinese Academy of Sciences(CAS)(Grant No.XDB 18010401)the Key Research Program of Frontier Sciences of CAS(Grant No.QYZDB-SSW-DQC009)+2 种基金the“135”Program of the Institute of Geochemistry of CASthe Hundred-Talent Program of CASthe National Natural Science Foundation of China(Grant Nos.41474078,41774099,and 41772042)
文摘The electrical conductivities of single-crystal K-feldspar along three different crystallographic directions are investigated by the Solartron-1260 Impedance/Gain-phase analyzer at 873 K–1223 K and 1.0 GPa–3.0 GPa in a frequency range of 10-1 Hz–106 Hz. The measured electrical conductivity along the ⊥ [001] axis direction decreases with increasing pressure, and the activation energy and activation volume of charge carriers are determined to be 1.04 ± 0.06 e V and 2.51 ± 0.19 cm^3/mole, respectively. The electrical conductivity of K-feldspar is highly anisotropic, and its value along the⊥ [001] axis is approximately three times higher than that along the ⊥ [100] axis. At 2.0 GPa, the diffusion coefficient of ionic potassium is obtained from the electrical conductivity data using the Nernst–Einstein equation. The measured electrical conductivity and calculated diffusion coefficient of potassium suggest that the main conduction mechanism is of ionic conduction, therefore the dominant charge carrier is transferred between normal lattice potassium positions and adjacent interstitial sites along the thermally activated electric field.
基金the support by National Natural Science Foundation of China under grants (11202006)University’s Science and technology exploiture of Shangxi Province (20121010)the National Basic Research Program of China (G2010CB832701)
文摘Polyvinylpyrrolidone-reduced graphene oxide was prepared by modified hummers method and was used as adsorbent for removing Cu ions from wastewater. The effects of contact time and ions concentration on adsorption capacity were examined. The maximum adsorption capacity of 1689 mg/g was observed at an initial p H value of 3.5 after agitating for 10 min. It was demonstrated that polyvinylpyrrolidone-reduced graphene oxide had a huge adsorption capacity for Cu ions, which was 10 times higher than maximal value reported in previous works. The adsorption mechanism was also discussed by density functional theory. It demonstrates that Cu ions are attracted to surface of reduced graphene oxide by C atoms in reduced graphene oxide modified by polyvinylpyrrolidone through physisorption processes, which may be responsible for the higher adsorption capacity. Our results suggest that polyvinylpyrrolidone-reduced graphene oxide is an effective adsorbent for removing Cu ions in wastewater. It also provides a new way to improve the adsorption capacity of reduced graphene oxide for dealing with the heavy metal ion in wastewater.
基金funded by the National Natural Science Foundation of China (NNSFC grant nos. 52103034, 51873126, 52175331 and 52003170)Shandong Provincial Natural Science Foundation (ZR2021QE014, ZR2020ZD04)
文摘Effective thermal management is quite urgent for electronics owing to their ever-growing integration degree,operation frequency and power density,and the main strategy of thermal management is to remove excess energy from electronics to outside by thermal conductive materials.Compared to the conventional thermal management materials,flexible thermally conductive films with high in-plane thermal conductivity,as emerging candidates,have aroused greater interest in the last decade,which show great potential in thermal management applications of next-generation devices.However,a comprehensive review of flexible thermally conductive films is rarely reported.Thus,we review recent advances of both intrinsic polymer films and polymer-based composite films with ultrahigh in-plane thermal conductivity,with deep understandings of heat transfer mechanism,processing methods to enhance thermal conductivity,optimization strategies to reduce interface thermal resistance and their potential applications.Lastly,challenges and opportunities for the future development of flexible thermally conductive films are also discussed.
基金supported by the National Natural Science Foundation of China (51672156)Local Innovative Research Teams Project of Guangdong Pearl River Talents Program (No. 2017BT01N111)+2 种基金Guangdong Province Technical Plan Project (2017B010119001)Shenzhen Technical Plan Project (JCYJ20170817161221958 and JCYJ20170412170706047)Shenzhen Graphene Manufacturing Innovation Center (201901161513)。
文摘Aqueous Zinc-ion batteries(ZIB) are attracting immense attention because of their merits of excellent safety and quite cheap properties compared with lithium-ion batteries(LIB).Manganese oxide is one of the most important cathode materials of ZIB.In this paper,α-Mn2O3 used as cathode of ZIB is synthesized via Metal-Organic Framework(MOF)-derived method,which delivers a high specific capacity of225 mAh g^(-1) at 0.05 A g^(-1) and 92.7 mAh g^(-1) after 1700 cycles at 2 A g^(-1).The charge storage mechanism of α-Mn2O3 cathode is found to greatly depend on the discharge current density.At lower current density discharging,the H+ and Zn2+ are successively intercalated into the α-Mn2O3 before and after the "turning point" of discharge voltage and their discharging products present obviously different morphologies changing from flower-like to large plate-like products.At a higher current density,the low-voltage plateau after the turning point disappears due to the decrease of amount of Zn2+ intercalation and the H+intercalation is dominated in α-Mn2 O3.This study provides significant understanding for future design and research of high-performance Mn-based cathodes of ZIB.
基金This work was supported by the National Natural Science Foundation of China (Grant No: 19875050, 10075041, 10075044).
文摘The microstmcture and conductive mechanism of high density polyethylene/carbon black (HDPE/CB) composite were investigated by positron annihilation lifetime spectroscopy (PALS). The PALS were measured in two series of samples,one with various CB contents in the composites and the other with various γ-irradiation doses in HDPE/CB composite containing 20 wt% CB. It was found that CB particles distribute in the amorphous regions, the CB critical content value in HDPE/CB composite is about 16.7 wt% and the suitable γ-irradiation dose for improving the conductive behavior of HDPE/CB composite is about 20 Mrad. The result observed for the second set of samples suggests that γ-irradiation causes not only cross-linking in amorphous regions but also destruction of the partial crystalline structure. Therefore, a suitable irradiation dose, about 20 Mrad, can induce sufficient cross-linking in the amorphous regions without enhancing the decomposition of crystalline structure, so that the positive temperature coefficient (PTC) effect remains while the negative temperature coefficient (NTC) effect is suppressed. A new interpretation of the conductive mechanism, which might provide a more detailed explanation of the PTC effect and the NTC effect has been proposed.
基金financially supported by NSFC (Grant Nos.21621091,21373008)the National Key Research and Development Program of China (2016YFB0100202)
文摘Porous core–shell CoMn_2O_4 microspheres of ca. 3–5 μm in diameter were synthesized and served as anode of lithium ion battery. Results demonstrate that the as-synthesized CoMn_2O_4 materials exhibit excellent electrochemical properties. The CoMn_2O_4 anode can deliver a large capacity of 1070 mAh g^(–1) in the first discharge, a reversible capacity of 500 mAh g^(–1) after 100 cycles with a coulombic efficiency of 98.5%at a charge–discharge current density of 200 mA g^(–1), and a specific capacity of 385 mAh g^(–1) at a much higher charge-discharge current density of 1600 mA g^(–1). Synchrotron X–ray absorption fine structure(XAFS) techniques were applied to investigate the conversion reaction mechanism of the CoMn_2O_4 anode.The X–ray absorption near edge structure(XANES) spectra revealed that, in the first discharge–charge cycle, Co and Mn in CoMn_2O_4 were reduced to metallic Co and Mn when the electrode was discharged to 0.01 V, while they were oxidized respectively to CoO and MnO when the electrode was charged to 3.0 V.Experiments of both XANES and extended X–ray absorption fine structure(EXAFS) revealed that neither valence evolution nor phase transition of the porous core–shell CoMn_2O_4 microspheres could happen in the discharge plateau from 0.8 to 0.6 V, which demonstrates the formation of solid electrolyte interface(SEI) on the anode.
基金financially supported by the National Natural Science Foundation of China(Nos.51772138,51572118,and 51601082)the Fundamental Research Funds for the Central Universities(No.lzujbky-2020-59)。
文摘Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.
基金the financial support under the Short Term Grant (No.304/PKIMIA/636065)
文摘The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and different initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non-linear Langmuir isotherm for chitosan, chitosan-GLA and chitosan-alginate beads in single metal system were 34.98, 14.24 and 60.27 mg/g, respectively. However, the adsorption capacity of Pb(II) ions were reduced in the binary metal system due to the competitive adsorption between Pb(II) and Cu(II) ions. Based on the ion exchange study, the release of Ca2+, Mg2+, K+ and Na+ ions played an important role in the adsorption of Pb(II) ions by all three adsorbents but only at lower concentrations of Pb(II) ions. Infrared spectra showed that the binding between Pb(II) ions and the adsorbents involved mostly the nitrogen and oxygen atoms. All three adsorbents showed satisfactory adsorption capacities and can be considered as an efficient adsorbent for the removal of Pb(II) ions from aqueous solutions.
基金financially supported by the National Key Research and Development Program of China (2018YFC1901605)the National Natural Science Foundation of China (52004338)+2 种基金the Hunan Provincial Natural Science Foundation of China (2020JJ5696)the Guangdong Provincial Department of Natural Resources (2020-011)the Fundamental Research Funds for the Central Universities of Central South University (2020zzts058)。
文摘High-performance lithium ion capacitors(LICs) have been seriously hindered by the very low capacity and unclear capacitive mechanism of carbon cathode.Herein,after the combination of experimental results and theoretical calculations,it is found that the critical pore size of 0.8 nm for PF_6~-ion adsorption decreases strong interactive repulsion of electrons and largely reduces adsorption energy barrier,which greatly improves the charge accommodation capacity in electrical double-layer behavior.Most importantly,the chemical-bond evolution process of C=O group has been firstly revealed by X-ray photoelectron spectroscopy(XPS),indicating that the introduction of C=O group can provide abundant redox active sites for PF_6~-ion adsorption accompanied with enhanced pseudocapacitive capacity.Attributed to the synergistic effect of dual capacitive mechanism,porous carbon sheet(PCS) cathode shows a reversible specific capacity of 53.6 mAh g^(-1) even at a high current density of 50 A g^(-1).Significantly,the quasisolid-state LIC manifests state-of-the-art electrochemical performances with an integrated maximum energy density of 163 Wh kg^(-1) and an outstanding power density of 15,000 W kg^(-1).This elaborate work promotes better fundamental understanding about capacitive mechanism of PF_6~-ion and offers a rational dual-capacitive strategy for the design of advanced carbon cathodes.
基金financial support from the National Natural Science Foundation of China (No. 51904135, 51804149, 51764029)the Scientific Research Fundation of Yunnan Provincial Department of Education (No. 2019J0032)+1 种基金the Applied Basic Research Fundation of Yunnan Province (No. 2019FB076, 2018FD039)the Scientific Research Fund of High-end Talents Introduction of Kunming University of Science and Technology (No. KKKP201752022)。
文摘The microstructures of precursors strongly affect the electrochemical performance of Ni-rich layerstructured cathode materials.In this study,the growth behaviour of Ni_(0.815)Co_(0.15)Al_(0.035)(OH)_2(NCA) prepared via the ammonia complexation precipitation method in a 50-L-volume continuously stirred tank reactor(CSTR) is studied in detail.The growth of Ni(OH)2-based hydroxide can be divided into a nucleation process,an agglomeration growth process,a process in which multiple growth mechanisms coexist,and an interface growth process over time,while the inner structure of the CSTR can be divided into a nucleation zone,a complex dissolution zone,a growth zone,and a maturation zone.The concentration of ammonium ions affects the growth habit of the primary crystal significantly due to its specific adsorption on the electronegative crystal plane.When the ammonia concentration is <1.5 mol L^(-1) at 60℃ at pH=11.5,the precursors grow preferentially along the(1 0 1) crystal plane,whereas they grow preferentially along the(0 0 1) crystal plane when the concentration is >2.0 mol L^(-1).The LiNi_(0.815)Co_(0.15)Al_(0.035)O_2 materials inherit the grain structure of the precursor.Materials prepared from precursors with(1 0 1)preferential primary particles show a higher specific capacity and better rate performance than those that were prepared from(0 0 1) preferential primary particles,but the latter realize a better cycling performance than the former.
基金the financial support from the International Science & Technology Cooperation Program of China (No. 2016YFE0102200)Shenzhen Technical Plan Project (No. JCYJ20160301154114273)+1 种基金National Key Basic Research(973) Program of China (No. 2014CB932400)Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program (2017BT01N111)
文摘Aqueous rechargeable Zn/MnO2 zinc-ion batteries(ZIBs)are reviving recently due to their low cost,non-toxicity,and natural abundance.However,their energy storage mechanism remains controversial due to their complicated electrochemical reactions.Meanwhile,to achieve satisfactory cyclic stability and rate performance of the Zn/MnO2 ZIBs,Mn2+ is introduced in the electrolyte(e.g.,ZnSO4 solution),which leads to more complicated reactions inside the ZIBs systems.Herein,based on comprehensive analysis methods including electrochemical analysis and Pourbaix diagram,we provide novel insights into the energy storage mechanism of Zn/MnO2 batteries in the presence of Mn2+.A complex series of electrochemical reactions with the coparticipation of Zn2+,H+,Mn2+,SO42-,and OH-were revealed.During the first discharge process,co-insertion of Zn2+ and H+ promotes the transformation of MnO2 into ZnxMnO4,MnOOH,and Mn2O3,accompanying with increased electrolyte pH and the formation of ZnSO4·3 Zn(OH)2-5 H2O.During the subsequent charge process,ZnxMnO4,MnOOH,and Mn2O3 revert to a-MnO2 with the extraction of Zn2+ and H+,while ZnSO4·3Zn(OH)2·5H2O reacts with Mn2+ to form ZnMn3O7·3 H2O.In the following charge/discharge processes,besides aforementioned electrochemical reactions,Zn2+ reversibly insert into/extract from α-MnO2,ZnxMnO4,and ZnMn3O7·3H2O hosts;ZnSO4·3Zn(OH)2·5 H2O,Zn2Mn3O8,and ZnMn2O4 convert mutually with the participation of Mn2+.This work is believed to provide theoretical guidance for further research on high-performance ZIBs.
基金supported by the Fostering Foundation for the Excellent Ph D.Dissertation of Gansu Agricultural University(2013002)the National High Technology Research and Development Program of China(2013AA102505)the Ministry of Science and Technology National Key R&D project(2016YFC0904600)
基金1 Project supported by the National Natural Science Foundation of China (Nos. 40472026 and 40072017).
文摘A single-factor experiment of copper ion adsorption on pure palygorskite was carried out to understand the Cu2+ sorption of palygorskite—an important clay mineral in soil and sedimentary rock. In addition, pH of the solution and the surface microstructure of palygorskite were investigated before and after adsorption. The experimental results indicated that efficiency of Cu2+ removal was related to the oscillation rate of the specimen shaker, sorption time, initial pH value and the amount of adsorbent added. Palygorskite induced Cu2+ hydrolysis and interaction between copper hydroxide colloids and palygorskite surfaces, as observed with transmission electron microscopy (TEM), were the main contributions to palygorskite removal of Cu2+. This mechanism was different from adsorption at the mineral-water interface. It was proposed that surface hydrolysis of palygorskite raised the alkalinity of the palygorskite-water interface and suspension system. Thus, the induced pH of the solution was then high enough for Cu2+ hydrolysis on the mineral surface and in solution.
