Ionic gels can be potentially used in wearable devices owing to their high humidity resistance and non-volatility.However,the applicability of existing ionic gel pressure sensors is limited by their low sensitivity.Th...Ionic gels can be potentially used in wearable devices owing to their high humidity resistance and non-volatility.However,the applicability of existing ionic gel pressure sensors is limited by their low sensitivity.Therefore,it is very import-ant to develop an ionic gel pressure sensor with high sensitivity and a wide pressure detection range without sacrificing mechan-ical stretchability and self-healing ability.Herein,we report an effective strategy for developing pressure sensors based on ion-ic gel composites consisting of high-molecular-weight polymers,ionic liquids,and Au nanoparticles.The resulting capacitive pressure sensors exhibit high pressure sensitivity,fast response,and excellent self-healing properties.The sensors composed of highly hydrophobic polymers and ionic liquids can be used to track underwater movements,demonstrating broad application prospects in human motion state monitoring and underwater mechanical operations.展开更多
Wearable electronics integrated with stretchable sensors are considered a promising and non-invasive strategy to monitor respiratory status for health assessment.However,long-term and stable monitoring of respiratory ...Wearable electronics integrated with stretchable sensors are considered a promising and non-invasive strategy to monitor respiratory status for health assessment.However,long-term and stable monitoring of respiratory abnormality is still a grand challenge.Here,we report a facile one-step thermal stretching strategy to fabricate an anti-fatigue ionic gel(AIG)sensor with high fatigue threshold(0=1130 J m^(–2)),high stability(>20,000 cycles),high linear sensitivity,and recyclability.A multimodal wearable respiratory monitoring system(WRMS)developed with AIG sensors can continuously measure respiratory abnormality(single-sensor mode)and compliance(multi-sensor mode)by monitoring the movement of the ribcage and abdomen in a long-term manner.For single-sensor mode,the respiratory frequency(Fr),respiratory energy(Er),and inspire/expire time(I/E ratio)can be extracted to evaluate the respiratory status during sitting,sporting,and sleeping.Further,the multi-sensors mode is developed to evaluate patientventilator asynchrony through validated clinical criteria by monitoring the incongruous movement of the chest and abdomen,which shows great potential for both daily home care and clinical applications.展开更多
Integrating multiple functions into one gel that can be widely applied to electronic devices as well as chemical and biomedical engineering remains a big challenge.Here,a multifunctional ionic liquid/dynamic covalent ...Integrating multiple functions into one gel that can be widely applied to electronic devices as well as chemical and biomedical engineering remains a big challenge.Here,a multifunctional ionic liquid/dynamic covalent bonds (ionic/DCB) type gel was designed and synthesized via one-pot polymerization.With the assistance of electrostatic interaction provided by the imidazolium cations of IL and the reversible DCB of boronic ester,as-prepared ionic/DCB gel showed good stretchable properties and high ionic conductivity at ambient conditions.In addition,the electrostatic interaction between imidazolium cations and sulfonate anions and the reversible DCB led to enhanced chain mobility and thereby excellent self-healing properties.Particularly,sulfonate anions in ionic/DCB gel could alleviate the migration of electronegative polysulfide and promote the transportation of electropositive lithium ion in lithium-sulfur battery system.Therefore,this work provides a new insight to promote the current research on self-healing gels,hopefully expanding their applications in electronic devices.展开更多
A new type of soft actuator material-ionic liquid gel(ILG),which consists of HEMA,BMIMBF4,and TiO_2,can be transformed into gel state under the irradiation of ultraviolet(UV)light.In this paper,Mooney–Rivlin hyperela...A new type of soft actuator material-ionic liquid gel(ILG),which consists of HEMA,BMIMBF4,and TiO_2,can be transformed into gel state under the irradiation of ultraviolet(UV)light.In this paper,Mooney–Rivlin hyperelastic model of finite element method is proposed for the first time to study the properties of the ILG.It has been proved that the content of TiO_2 has a great influence on the properties of the gel,and Young’s modulus of the gel increases with the increase of its content,despite of reduced tensile deformation.The results in this work show that when the TiO_2 content is 1.0 wt%,a large tensile deformation and a strong Young’s modulus can be obtained to be 325%and 7.8 k Pa,respectively.The material parameters of ILG with TiO_2content values of 0.2 wt%,0.5 wt%,1.0 wt%,and 1.5 wt%are obtained,respectively,through uniaxial tensile tests,including C_(10),C_(01),C_(20),C_(11),C_(02),C_(30),C_(21),C_(12),and C_(03)elements.In this paper,the large-scaled general finite element software ANSYS is used to simulate and analyze the ILG,which is based on SOLID186 element and nonlinear hyperelastic Mooney–Rivlin model.The finite element simulation analysis based stress-strain curves are almost consistent with the experimental stress–strain curves,and hence the finite element analysis of ILG is feasible and credible.This work presents a new direction for studying the performance of soft actuator for the ILG,and also contributes to the design of soft robot actuator.展开更多
Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characteriz...Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characterized by infrared(IR) spectroscopy and nuclear magnetic resonance(NMR) spectroscopy. Thermogravimetric analyzer(TG), X-ray diffractometer(XRD) and scanning electron microscope(SEM) were used to evaluate their thermal stability,crystalline structure and apparent morphology, respectively. Surface areas of the prepared catalysts were calculated by the Brunauer-Emmett-Teller(BET) method. The catalytic reaction for the synthesis of propylene carbonate(PC) using CO_2 and propylene oxide(PO) in the presence of the prepared catalysts was studied. The influences of times of recycling and catalyst structure on catalytic performance were also investigated. The experimental results showed that the silica gel supported polyether ILs catalysts successfully prepared under mild condition could possess the advantages of high activity, excellent thermal stability, good selectivity and easy recycling, while the phase transition of the liquid polyether ILs catalysts was also achieved. When the reaction temperature was 90 °C, the CO_2 pressure was 2.0 MPa and the dosage of the catalyst was 2.5%, [HOOC-PECH-MIM]Cl-Si was found to have the best catalytic performance in the catalytic process, with the conversion rate reaching 100% and the selectivity equating to 98.2%. The conversion rate and selectivity still could reach more than 90% even after the catalyst was reused for 15 times.展开更多
A new polymeric ionic liquid gel was prepared with 1-[(2-methacryloyloxy)ethyl]-3-methylimidazolium bromide(MEMImBr) via radiation-induced polymerization and cross-linking at room temperature.The resultant PMEMImBr ge...A new polymeric ionic liquid gel was prepared with 1-[(2-methacryloyloxy)ethyl]-3-methylimidazolium bromide(MEMImBr) via radiation-induced polymerization and cross-linking at room temperature.The resultant PMEMImBr gel exhibits high strength and flexibility as well as special swelling behavior in oil-in-water(O/W)emulsions.The swelling behavior of PMEMImBr gel in emulsions is similar to that in water except that the swelling rate in emulsions is slightly smaller than that in water.The organic solvents with higher polarity in the emulsions contribute to the swelling of PMEMImBr gels,and the O/W proportion of emulsion in the swollen gel equals approximately that of original emulsion when the concentration of organic solvent is lower than 0.2 g/g.展开更多
An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immob...An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immobilized on the sol-gel derived silica, which is superior to purely viscous ionic liquid with a crucial limit of high temperature, low mass transfer rate,and mass loss. The adsorbents were characterized by the Fourier transform infrared spectrometer, transmission electron microscope, N_2 adsorption/desorption, X-ray photoelectron spectroscopy, and thermal analysis techniques. The effects of the metal and halogen in IL, the loading amount of IL, and the adsorption temperature were studied by dynamic adsorption experiments at a gas flow rate of 100 mL/min. The H2 S adsorption results have showed that the optimal adsorbent and adsorption temperature are 5% [Bmim]Cl·CuCl_2/silica gel and 20—50 ℃, respectively. H_2 S can be captured and oxidized to elemental sulfur, and [Bmim]Cl·CuCl_2/silica gel can be readily regenerated by air. The excellent efficiency of H2 S removal may be attributed to the formation of nano-scaled and high-concentration [Bmim]Cl·CuCl_2 confined in silica gel, indicating that the immobilization of [Bmim]Cl·CuCl_2 on the sol-gel derived silica can be used for H2 S removal promisingly.展开更多
Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, shape, and ionic conductivity ...Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, shape, and ionic conductivity of these samples. The results show that the range of solid solution formation is in 0< x ≤0 09, in which the conductivity of these samples raises with the increasing amount of RE 2O 3 (RE=Pr, Nd, Sm, Gd) added, and the diameter of the powders is about 100 nm. Compared with the conventional solid state reaction, the sol gel method needs low temperature and presents high ionic conductivity.展开更多
In this study, a modified silica gel surface with a hydrophobic ionic liquid (SG-1,10-PhenanNTf2) was used as an adsorbent for a selective extraction of coumarin prior to its determination by use of high performance l...In this study, a modified silica gel surface with a hydrophobic ionic liquid (SG-1,10-PhenanNTf2) was used as an adsorbent for a selective extraction of coumarin prior to its determination by use of high performance liquid chromatography. Results demonstrated that SG-1,10-PhenanNTf2 phase had a good adsorption capacity up to 85.29 mg?g?1, high selectivity, good site accessibility and fast binding kinetics toward coumarin. The adsorption capacity for coumarin was improved by 62.33% with the SG-1,10-PhenanNTf2 phase as compared to activated silica gel. Adsorption isotherm data displayed that the adsorption process was mainly monolayer on a homogeneous adsorbent surface, confirming the validity of Langmuir adsorption isotherm model. The adsorption of coumarin on the SG-1,10-PhenanNTf2 phase was accomplished after only 60 min contact time. Results of kinetic models showed that the adsorption of coumarin on the SG-1,10-PhenanNTf2 phase obeyed a pseudo second-order kinetic model. Finally, the efficiency of this methodology was confirmed by applying it to real water samples.展开更多
Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the...Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the ratio of mixing with dimetyl sulfoxide and the concentration of LiI affect the conductivity. The behavior is different depending on the type of ionic liquid. Although the mixing ionic liquid enhances the conductivity, the short circuit current density of assembled solar cell with it was suppressed so much.展开更多
Apatite-lanthanum silicate has attracted considerable interest in recent years due to its high oxide ion conductivity.In this paper,V-doped samples La10-xVx(SiO4) 6O3+x(0≤x≤1.5) were prepared by sol-gel method and t...Apatite-lanthanum silicate has attracted considerable interest in recent years due to its high oxide ion conductivity.In this paper,V-doped samples La10-xVx(SiO4) 6O3+x(0≤x≤1.5) were prepared by sol-gel method and the influences of V-dopant content on calcining temperature and conductivity were reported.The samples were characterized by thermal analysis(TG-DSC) ,X-ray diffraction(XRD) and scanning electron micrograph(SEM) . The apatite was obtained at 800°C,a relatively low temperature in comparison to 1500°C with the conventional solid-state method.The ceramic pellets sintered at 1200°C for 5 h showed a higher relative density than La9.33Si6O26 pellets sintered at 1400°C for 20 h.The conductivities of samples were measured by electrochemical impedance spectroscopy.The conductivity was improved with the increase of V-dopant content on La site.展开更多
Li1.3Al0.3Ti1.7(PO4)3 pellets sintered with different mole fractions of LiBO2 were prepared by sol-gel method.The structural identification,surface morphology,ionic conductivity,and activation energy of the pellets we...Li1.3Al0.3Ti1.7(PO4)3 pellets sintered with different mole fractions of LiBO2 were prepared by sol-gel method.The structural identification,surface morphology,ionic conductivity,and activation energy of the pellets were studied by X-ray diffraction,scanning electron microscopy,and electrochemical impedance spectroscopy.The results show that all the Li1.3Al0.3Ti1.7(PO4)3 pellets sintered with different mole fractions of LiBO2 have similar X-ray diffraction patterns.The sintered pellet becomes denser and the boundary and corner of the particles become illegible with the increase of LiBO2.Among the Li1.3Al0.3Ti1.7(PO3)4 pellets sintered with different mole fractions of LiBO2,the one sintered with 1 mol% LiBO2 shows the highest ionic conductivity of 3.95×10-4 S.cm-1 and the lowest activation energy of 0.2469 eV.展开更多
Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and con...Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and condensation reaction of Si(OC4H9)4. The crystallinity,morphology and ionic conductivity of composite polymer electrolyte films were examined by differential scanning calorimetry,scanning electron microscopy,atom force microscopy and alternating current impedance spectroscopy,respectively. Compared with the crystallinity of the unmodified SiO2 as inert filler,that of composite polymer electrolytes is decreased. The results show that silane-modified SiO2 particles are uniformly dispersed in (PEO)8LiClO4 composite polymer electrolyte film and the addition of silane-modified SiO2 increases the ionic conductivity of the (PEO)8LiClO4 more noticeably. When the mass fraction of SiO2 is about 10%,the conductivity of (PEO)8LiClO4-modified SiO2 attains a maximum value of 4.8×10-5 S·cm-1.展开更多
An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichlorometh...An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichloromethane by Williamson reaction.FTIR and ~1H-NMR measurement demonstrated that the polymer repeating units were C[CH_2-OCH_2O-(CH_2CH_2O)_m-CH_2O-(CH_2CH_2O)_n-CH_2O]_4.The polymer host held well mechanical properties for pentaerythritol cross-linking.The gel polymer electrolytes based on Lithium...展开更多
Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current densi...Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current density. Two kinds of ionic liquids were tested: imidazolium and pyrazolium systems. The two different stages of adding pyridine to the electrolyte were considered and the amount of pyridine was studied. It was found that the electrolyte including pyrazolium ionic liquids to which pyridine was added before the mixing with fluorinated oligomer showed the highest electric conductivity, short current density and open voltage. This resulted in the highest conversion efficiency of 4%. As the amount of pyridine increased, the fill factor and the open voltage were improved at first, and then the short current density increased. If the pyridine was added more, the short current density conversely decreased.展开更多
基金supported by the National Natural Science Foundation of China(NSFC,Grant Nos.61874111,62174152 and 62022079)the National Key Research and Development Program of China(Grant No.2020YFB1506400)+1 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020115)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA16021200).
文摘Ionic gels can be potentially used in wearable devices owing to their high humidity resistance and non-volatility.However,the applicability of existing ionic gel pressure sensors is limited by their low sensitivity.Therefore,it is very import-ant to develop an ionic gel pressure sensor with high sensitivity and a wide pressure detection range without sacrificing mechan-ical stretchability and self-healing ability.Herein,we report an effective strategy for developing pressure sensors based on ion-ic gel composites consisting of high-molecular-weight polymers,ionic liquids,and Au nanoparticles.The resulting capacitive pressure sensors exhibit high pressure sensitivity,fast response,and excellent self-healing properties.The sensors composed of highly hydrophobic polymers and ionic liquids can be used to track underwater movements,demonstrating broad application prospects in human motion state monitoring and underwater mechanical operations.
基金supported by the National Natural Science Foundation of China(NNSFC grant No.52125301)the Sichuan Province Science and Technology Department Project(grant No.2021YJ0448)+1 种基金the Post Doctoral Research Fund,West China Hospital,Sichuan University(grant No.2020HXBH181)We thank Shanghai Synchrotron Radiation Facility(SSRF)BL16B1 for providing technological support for SAXS and WAXD characterization。
文摘Wearable electronics integrated with stretchable sensors are considered a promising and non-invasive strategy to monitor respiratory status for health assessment.However,long-term and stable monitoring of respiratory abnormality is still a grand challenge.Here,we report a facile one-step thermal stretching strategy to fabricate an anti-fatigue ionic gel(AIG)sensor with high fatigue threshold(0=1130 J m^(–2)),high stability(>20,000 cycles),high linear sensitivity,and recyclability.A multimodal wearable respiratory monitoring system(WRMS)developed with AIG sensors can continuously measure respiratory abnormality(single-sensor mode)and compliance(multi-sensor mode)by monitoring the movement of the ribcage and abdomen in a long-term manner.For single-sensor mode,the respiratory frequency(Fr),respiratory energy(Er),and inspire/expire time(I/E ratio)can be extracted to evaluate the respiratory status during sitting,sporting,and sleeping.Further,the multi-sensors mode is developed to evaluate patientventilator asynchrony through validated clinical criteria by monitoring the incongruous movement of the chest and abdomen,which shows great potential for both daily home care and clinical applications.
基金financially supported by the National Natural Science Fund for Distinguished Young Scholars (No. 21425417)the National Natural Science Foundation of China (Nos. 21835005, U1862109, and 21704071)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Integrating multiple functions into one gel that can be widely applied to electronic devices as well as chemical and biomedical engineering remains a big challenge.Here,a multifunctional ionic liquid/dynamic covalent bonds (ionic/DCB) type gel was designed and synthesized via one-pot polymerization.With the assistance of electrostatic interaction provided by the imidazolium cations of IL and the reversible DCB of boronic ester,as-prepared ionic/DCB gel showed good stretchable properties and high ionic conductivity at ambient conditions.In addition,the electrostatic interaction between imidazolium cations and sulfonate anions and the reversible DCB led to enhanced chain mobility and thereby excellent self-healing properties.Particularly,sulfonate anions in ionic/DCB gel could alleviate the migration of electronegative polysulfide and promote the transportation of electropositive lithium ion in lithium-sulfur battery system.Therefore,this work provides a new insight to promote the current research on self-healing gels,hopefully expanding their applications in electronic devices.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51538009 and 51605334)the Natural Science Foundation of Shanghai Municipality,China(Grant No.08002360285)
文摘A new type of soft actuator material-ionic liquid gel(ILG),which consists of HEMA,BMIMBF4,and TiO_2,can be transformed into gel state under the irradiation of ultraviolet(UV)light.In this paper,Mooney–Rivlin hyperelastic model of finite element method is proposed for the first time to study the properties of the ILG.It has been proved that the content of TiO_2 has a great influence on the properties of the gel,and Young’s modulus of the gel increases with the increase of its content,despite of reduced tensile deformation.The results in this work show that when the TiO_2 content is 1.0 wt%,a large tensile deformation and a strong Young’s modulus can be obtained to be 325%and 7.8 k Pa,respectively.The material parameters of ILG with TiO_2content values of 0.2 wt%,0.5 wt%,1.0 wt%,and 1.5 wt%are obtained,respectively,through uniaxial tensile tests,including C_(10),C_(01),C_(20),C_(11),C_(02),C_(30),C_(21),C_(12),and C_(03)elements.In this paper,the large-scaled general finite element software ANSYS is used to simulate and analyze the ILG,which is based on SOLID186 element and nonlinear hyperelastic Mooney–Rivlin model.The finite element simulation analysis based stress-strain curves are almost consistent with the experimental stress–strain curves,and hence the finite element analysis of ILG is feasible and credible.This work presents a new direction for studying the performance of soft actuator for the ILG,and also contributes to the design of soft robot actuator.
基金supported by the National Natural Science Foundation of China (NSFC 21706163)the Liaoning Province Department of Education Foundation (LQGD2017020)
文摘Three new catalysts based on the silica gel supported polyether ionic liquids(ILs), i.e., [HO-PECH-MIM]ClSi, [H2N-PECH-MIM]Cl-Si, and [HOOC-PECH-MIM]Cl-Si, were prepared, and their chemical structures were characterized by infrared(IR) spectroscopy and nuclear magnetic resonance(NMR) spectroscopy. Thermogravimetric analyzer(TG), X-ray diffractometer(XRD) and scanning electron microscope(SEM) were used to evaluate their thermal stability,crystalline structure and apparent morphology, respectively. Surface areas of the prepared catalysts were calculated by the Brunauer-Emmett-Teller(BET) method. The catalytic reaction for the synthesis of propylene carbonate(PC) using CO_2 and propylene oxide(PO) in the presence of the prepared catalysts was studied. The influences of times of recycling and catalyst structure on catalytic performance were also investigated. The experimental results showed that the silica gel supported polyether ILs catalysts successfully prepared under mild condition could possess the advantages of high activity, excellent thermal stability, good selectivity and easy recycling, while the phase transition of the liquid polyether ILs catalysts was also achieved. When the reaction temperature was 90 °C, the CO_2 pressure was 2.0 MPa and the dosage of the catalyst was 2.5%, [HOOC-PECH-MIM]Cl-Si was found to have the best catalytic performance in the catalytic process, with the conversion rate reaching 100% and the selectivity equating to 98.2%. The conversion rate and selectivity still could reach more than 90% even after the catalyst was reused for 15 times.
基金supported by the National Natural Science Foundation of China (No. 11375019)
文摘A new polymeric ionic liquid gel was prepared with 1-[(2-methacryloyloxy)ethyl]-3-methylimidazolium bromide(MEMImBr) via radiation-induced polymerization and cross-linking at room temperature.The resultant PMEMImBr gel exhibits high strength and flexibility as well as special swelling behavior in oil-in-water(O/W)emulsions.The swelling behavior of PMEMImBr gel in emulsions is similar to that in water except that the swelling rate in emulsions is slightly smaller than that in water.The organic solvents with higher polarity in the emulsions contribute to the swelling of PMEMImBr gels,and the O/W proportion of emulsion in the swollen gel equals approximately that of original emulsion when the concentration of organic solvent is lower than 0.2 g/g.
基金financially supported by the Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2014BAC28B01)the Jiangsu Key Laboratory of Anaerobic Biotechnology (Jiangnan University) Supported Research Project (No. JKLAB201703)
文摘An innovative approach to H2 S capture has been developed using several metal-based ionic liquids([Bmim]Cl·CuCl_2, [Bmim]Cl·FeCl_3, [Bmim]Cl·ZnCl_2, [Bmim]Br·CuCl_2, and [Bmim]Br·FeCl_3) immobilized on the sol-gel derived silica, which is superior to purely viscous ionic liquid with a crucial limit of high temperature, low mass transfer rate,and mass loss. The adsorbents were characterized by the Fourier transform infrared spectrometer, transmission electron microscope, N_2 adsorption/desorption, X-ray photoelectron spectroscopy, and thermal analysis techniques. The effects of the metal and halogen in IL, the loading amount of IL, and the adsorption temperature were studied by dynamic adsorption experiments at a gas flow rate of 100 mL/min. The H2 S adsorption results have showed that the optimal adsorbent and adsorption temperature are 5% [Bmim]Cl·CuCl_2/silica gel and 20—50 ℃, respectively. H_2 S can be captured and oxidized to elemental sulfur, and [Bmim]Cl·CuCl_2/silica gel can be readily regenerated by air. The excellent efficiency of H2 S removal may be attributed to the formation of nano-scaled and high-concentration [Bmim]Cl·CuCl_2 confined in silica gel, indicating that the immobilization of [Bmim]Cl·CuCl_2 on the sol-gel derived silica can be used for H2 S removal promisingly.
文摘Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, shape, and ionic conductivity of these samples. The results show that the range of solid solution formation is in 0< x ≤0 09, in which the conductivity of these samples raises with the increasing amount of RE 2O 3 (RE=Pr, Nd, Sm, Gd) added, and the diameter of the powders is about 100 nm. Compared with the conventional solid state reaction, the sol gel method needs low temperature and presents high ionic conductivity.
文摘In this study, a modified silica gel surface with a hydrophobic ionic liquid (SG-1,10-PhenanNTf2) was used as an adsorbent for a selective extraction of coumarin prior to its determination by use of high performance liquid chromatography. Results demonstrated that SG-1,10-PhenanNTf2 phase had a good adsorption capacity up to 85.29 mg?g?1, high selectivity, good site accessibility and fast binding kinetics toward coumarin. The adsorption capacity for coumarin was improved by 62.33% with the SG-1,10-PhenanNTf2 phase as compared to activated silica gel. Adsorption isotherm data displayed that the adsorption process was mainly monolayer on a homogeneous adsorbent surface, confirming the validity of Langmuir adsorption isotherm model. The adsorption of coumarin on the SG-1,10-PhenanNTf2 phase was accomplished after only 60 min contact time. Results of kinetic models showed that the adsorption of coumarin on the SG-1,10-PhenanNTf2 phase obeyed a pseudo second-order kinetic model. Finally, the efficiency of this methodology was confirmed by applying it to real water samples.
文摘Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the ratio of mixing with dimetyl sulfoxide and the concentration of LiI affect the conductivity. The behavior is different depending on the type of ionic liquid. Although the mixing ionic liquid enhances the conductivity, the short circuit current density of assembled solar cell with it was suppressed so much.
基金Supported by the Joint Funds of NSFC-Guangdong of China(U0834004)the Natural Science Foundation of Guangdong Province(06025657)
文摘Apatite-lanthanum silicate has attracted considerable interest in recent years due to its high oxide ion conductivity.In this paper,V-doped samples La10-xVx(SiO4) 6O3+x(0≤x≤1.5) were prepared by sol-gel method and the influences of V-dopant content on calcining temperature and conductivity were reported.The samples were characterized by thermal analysis(TG-DSC) ,X-ray diffraction(XRD) and scanning electron micrograph(SEM) . The apatite was obtained at 800°C,a relatively low temperature in comparison to 1500°C with the conventional solid-state method.The ceramic pellets sintered at 1200°C for 5 h showed a higher relative density than La9.33Si6O26 pellets sintered at 1400°C for 20 h.The conductivities of samples were measured by electrochemical impedance spectroscopy.The conductivity was improved with the increase of V-dopant content on La site.
基金supported by the National Natural Science Foundation of China(No.20873054)the Scientific Research Fund of Hunan Provincial Education Department of China(No.07B060)
文摘Li1.3Al0.3Ti1.7(PO4)3 pellets sintered with different mole fractions of LiBO2 were prepared by sol-gel method.The structural identification,surface morphology,ionic conductivity,and activation energy of the pellets were studied by X-ray diffraction,scanning electron microscopy,and electrochemical impedance spectroscopy.The results show that all the Li1.3Al0.3Ti1.7(PO4)3 pellets sintered with different mole fractions of LiBO2 have similar X-ray diffraction patterns.The sintered pellet becomes denser and the boundary and corner of the particles become illegible with the increase of LiBO2.Among the Li1.3Al0.3Ti1.7(PO3)4 pellets sintered with different mole fractions of LiBO2,the one sintered with 1 mol% LiBO2 shows the highest ionic conductivity of 3.95×10-4 S.cm-1 and the lowest activation energy of 0.2469 eV.
文摘Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and condensation reaction of Si(OC4H9)4. The crystallinity,morphology and ionic conductivity of composite polymer electrolyte films were examined by differential scanning calorimetry,scanning electron microscopy,atom force microscopy and alternating current impedance spectroscopy,respectively. Compared with the crystallinity of the unmodified SiO2 as inert filler,that of composite polymer electrolytes is decreased. The results show that silane-modified SiO2 particles are uniformly dispersed in (PEO)8LiClO4 composite polymer electrolyte film and the addition of silane-modified SiO2 increases the ionic conductivity of the (PEO)8LiClO4 more noticeably. When the mass fraction of SiO2 is about 10%,the conductivity of (PEO)8LiClO4-modified SiO2 attains a maximum value of 4.8×10-5 S·cm-1.
文摘An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichloromethane by Williamson reaction.FTIR and ~1H-NMR measurement demonstrated that the polymer repeating units were C[CH_2-OCH_2O-(CH_2CH_2O)_m-CH_2O-(CH_2CH_2O)_n-CH_2O]_4.The polymer host held well mechanical properties for pentaerythritol cross-linking.The gel polymer electrolytes based on Lithium...
文摘Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current density. Two kinds of ionic liquids were tested: imidazolium and pyrazolium systems. The two different stages of adding pyridine to the electrolyte were considered and the amount of pyridine was studied. It was found that the electrolyte including pyrazolium ionic liquids to which pyridine was added before the mixing with fluorinated oligomer showed the highest electric conductivity, short current density and open voltage. This resulted in the highest conversion efficiency of 4%. As the amount of pyridine increased, the fill factor and the open voltage were improved at first, and then the short current density increased. If the pyridine was added more, the short current density conversely decreased.
