Ni-rich layered oxides are potential cathode materials for next-generation high energy density Li-ion batteries due to their high capacity and low cost.However,the inherently unstable surface properties,including high...Ni-rich layered oxides are potential cathode materials for next-generation high energy density Li-ion batteries due to their high capacity and low cost.However,the inherently unstable surface properties,including high levels of residual Li compounds,dissolution of transition metal cations,and parasitic side reactions,have not been effectively addressed,leading to significant degradation in their electrochemical performance.In this study,we propose a simple and effective lactic acid-assisted interface engineering strategy to regulate the surface chemistry and properties of Ni-rich LiNi_(0.8)Co_(0.1)Mr_(0.1)O_(2) cathode.This novel surface treatment method successfully eliminates surface residual Li compounds,inhibits structural collapse,and mitigates cathode-electrolyte interface film growth.As a result,the lactic acidtreated LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) achieved a remarkable capacity retention of 91.7% after 100 cycles at 0.5 C(25℃) and outstanding rate capability of 149.5 mA h g^(-1) at 10 C,significantly outperforming the pristine material.Furthermore,a pouch-type full cell incorporating the modified LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode demonstrates impressive long-term cycle life,retaining 81.5% of its capacity after 500 cycles at 1 C.More importantly,the thermal stability of the modified cathode is also dramatically improved.This study offers a valuable surface modification strategy for enhancing the overall performance of Ni-rich cathode materials.展开更多
The effects of 5 lactic acid bacteria(LAB)fermentation on the pasting properties of glutinous rice flour were compared,and suitable fermentation strains were selected based on the changes of viscosity,setback value,an...The effects of 5 lactic acid bacteria(LAB)fermentation on the pasting properties of glutinous rice flour were compared,and suitable fermentation strains were selected based on the changes of viscosity,setback value,and breakdown value to prepare LAB compound starter cultures.The results revealed that Latilactobacillus sakei HSD004 and Lacticaseibacillus rhamnosus HSD005 had apparent advantages in increasing the viscosity and reducing the setback and breakdown values of glutinous rice flour.In particular,the compound starter created using the two abovementioned LAB in the ratio of 3:1 had better performance than that using a single LAB in improving the pasting properties and increasing the water and oil absorption capacity of glutinous rice flour.Moreover,the gelatinization enthalpy of the fermented samples increased significantly.For frozen glutinous rice dough stored for 28 days,the viscoelasticity of frozen dough prepared by compound starter was better than that of control dough,and the freezable water content was lower than that of control dough.These results indicate that compound LAB fermentation is a promising technology in the glutinous rice-based food processing industry,which has significance for its application.展开更多
Food allergy as a global health problem threatens food industry.Bee pollen(BP)is a typical food with allergenic potentials,although it performs various nutritional/pharmacological functions to humans.In this study,lac...Food allergy as a global health problem threatens food industry.Bee pollen(BP)is a typical food with allergenic potentials,although it performs various nutritional/pharmacological functions to humans.In this study,lactic acid bacteria(LAB)were used to ferment Brassica napus BP for alleviating its allergenicity.Four novel allergens(glutaredoxin,oleosin-B2,catalase and lipase)were identified with significant decreases in LAB-fermented BP(FBP)than natural BP by proteomics.Meanwhile,metabolomics analysis showed significant increases of 28 characteristic oligopeptides and amino acids in FBP versus BP,indicating the degradation of LAB on allergens.Moreover,FBP showed alleviatory effects in BALB/c mice,which relieved pathological symptoms and lowered production of allergic mediators.Microbial high-throughput sequencing analysis showed that FBP could regulate gut microbiota and metabolism to strengthen immunity,which were closely correlated with the alleviation of allergic reactivity.These findings could contribute to the development and utilization of hypoallergenic BP products.展开更多
Drug-loaded microspheres are significant for the development of modern pharmaceutical products. It is well known that the taken of aspirin for long-term increases the risk of serious gastrointestinal complications, th...Drug-loaded microspheres are significant for the development of modern pharmaceutical products. It is well known that the taken of aspirin for long-term increases the risk of serious gastrointestinal complications, therefore a controllable delivery of aspirin is of importance to lighten those side effects. In this work, poly(lactic acid)(PLA) was chosen as the carrier to prepare PLA-aspirin microspheres by using the traditional and the improved solvent evaporation methods. It was found that no matter which experimental condition was, the encapsulation efficiency of aspirin was higher by using the improved method than that of the traditional method. Specifically, when the concentration of polyvinyl alcohol = 1%(mass),the polymer concentration = 1:20, the oil/water rate = 1:2.5, PLA-aspirin microspheres were obtained via the improved method with a high yield of 82.83%(mass) and an encapsulation efficiency of 44.09%. PLAaspirin microspheres were then prepared continuously using the improved method, which further enhanced the encapsulation efficiency to 54.56%. Approximate 85% aspirin released from microspheres within 7 days. Obvious degradation which was represented by reduction on hardness was observed by soaking microspheres in PBS for 60 days. This work is of interest because it provides a continuous route to prepare PLA-aspirin microspheres continuously with a high drug encapsulation efficiency.展开更多
Background:Lactic acid bacteria(LAB)participating in milk fermentation naturally release and enrich the fermented dairy product with a broad range of bioactive metabolites,which has numerous roles in the intestinal he...Background:Lactic acid bacteria(LAB)participating in milk fermentation naturally release and enrich the fermented dairy product with a broad range of bioactive metabolites,which has numerous roles in the intestinal health-promot-ing of the consumer.However,information is lacking regarding the application prospect of LAB fermented milk in the animal industry.This study investigated the effects of lactic acid bacteria-fermented formula milk(LFM)on the growth performance,intestinal immunity,microbiota composition,and transcriptomic responses in weaned piglets.A total of 24 male weaned piglets were randomly divided into the control(CON)and LFM groups.Each group consisted of 6 replicates(cages)with 2 piglets per cage.Each piglet in the LFM group were supplemented with 80 mL LFM three times a day,while the CON group was treated with the same amount of drinking water.Results:LFM significantly increased the average daily gain of piglets over the entire 14 d(P<0.01)and the average daily feed intake from 7 to 14 d(P<0.05).Compared to the CON group,ileal goblet cell count,villus-crypt ratio,sIgA,and lactate concentrations in the LFM group were significantly increased(P<0.05).Transcriptomic analysis of ileal mucosa identified 487 differentially expressed genes(DEGs)between two groups.Especially,DEGs involved in the intestinal immune network for IgA production pathways,such as polymeric immunoglobulin receptor(PIGR),were significantly up-regulated(P<0.01)by LFM supplementation.Moreover,trefoil factor 2(TFF2)in the LFM group,one of the DEGs involved in the secretory function of goblet cells,was also significantly up-regulated(P<0.01).Sequenc-ing of the 16S rRNA gene of microbiota demonstrated that LFM led to selective enrichment of lactate-producing and short-chain fatty acid(SCFA)-producing bacteria in the ileum,such as an increase in the relative abundance of Entero-coccus(P=0.09)and Acetitomaculum(P<0.05).Conclusions:LFM can improve intestinal health and immune tolerance,thus enhancing the growth performance of weaned piglets.The changes in microbiota and metabolites induced by LFM might mediate the regulation of the secretory function of goblet cells.展开更多
With increasing strict regulation on single-use plastics,lactic acid(LA)and alkyl lactates,as essential monomers for bio-degradable polylactic acid(PLA)plastic products,have gained worldwide attention in both academia...With increasing strict regulation on single-use plastics,lactic acid(LA)and alkyl lactates,as essential monomers for bio-degradable polylactic acid(PLA)plastic products,have gained worldwide attention in both academia and industry.While LA is still dominantly produced through fermentation processes from start,chemical synthesis from cellulosic biomass remains a grand challenge,owing to poor selectivity in activating CAH and CAC bonds in sugar molecules.To our best knowledge,recent publications have been focused on hydrothermal conversion of glucose to LA,while this review summarizes the highlights on direct thermal conversion of fructose as starting material to LA and derivatives.In particular,the synergies of metal/metal cations and acid/base catalysts will be critically revised on retro-aldol and dehydration reactions.This work will provide insights into rational design of active and selective catalysts for the production of carboxylic acids from biomass feedstocks.展开更多
In this study,a new type of 3 D printed living biological hydrogel was developed by integrating lactic acid bacteria(LAB)into biocompatible and non-toxic polymer materials.Interestingly,the living materials loaded wit...In this study,a new type of 3 D printed living biological hydrogel was developed by integrating lactic acid bacteria(LAB)into biocompatible and non-toxic polymer materials.Interestingly,the living materials loaded with LAB can be freeze-dried and reused for more than 100 times.The bio-hydrogel can be used to co-culture different LAB and keep its fermentation performance stable in long-term use.The release kinetics model and response surface method were used to simulate and optimize the bacteria release mode in the bio-hydrogel.The results show that the release of bacteria from hydrogel is regulated by the coupling of Fickian diffusion and polymer swelling.The stability of LAB hydrogel was evaluated by reuse experiments.The images of confocal microscopy and scanning electron microscope showed that the bacteria with high cell viability were distributed in the hydrogel and intact structure of the living hydrogel was maintained after 100 times of reuse as yoghurt starter.In conclusion,the 3 D printed LAB bio-hydrogel developed in this study has the advantage of reuse and sustainability,which is expected to open up a new way for the preparation of food culture starter.展开更多
Background: Metformin (M) is an effective first-line hypoglycemic agent in obese type 2 diabetes mellitus due to its low cost and safety profile. The Case: A 66-year-man presented with shock due to lactic acidosis ind...Background: Metformin (M) is an effective first-line hypoglycemic agent in obese type 2 diabetes mellitus due to its low cost and safety profile. The Case: A 66-year-man presented with shock due to lactic acidosis induced by M-supersaturation subsequent to acute renal failure following infective diarrhea. The drug has been used, by this patient, for >10 years without complication. Physical examination, laboratory tests, radiological investigations and blood cultures did not show evidence of new cardiac, hepatic and septic insult. Despite discontinuation of M and 2-days of aggressive hydration, bicarbonate infusions and pressors;toxic levels of the drug persisted and shock-state culminated in severe and oliguric renal failure with serum urea and creatinine up to 50 mmol/L and 1270 umol/L, respectively. Hence, continuous venovenous hemodiafiltration (CVVHDF) was used, for 16-hours, to remove the drug, correct his acidosis and support his severe renal complications. Hours after the procedure;drug level, lactic acidosis and its associated shock improved followed by gradual renal recovery. The patient was discharged after 6 days and serum creatinine reached his base line (180 umol/L) 2 weeks later. The drug was not recommended for his future use. Conclusion: M-induced lactic acidosis, should be considered in assessment of shock in M-treated patients and management of unstable patients indicates early-use of CVVHDF.展开更多
Petroleum-based materials,such as plastic,are characterized by adverse environmental pollution;as a result,researchers have sought alternative degradable plastics that are environmentally friendly,such as polylactic a...Petroleum-based materials,such as plastic,are characterized by adverse environmental pollution;as a result,researchers have sought alternative degradable plastics that are environmentally friendly,such as polylactic acid(PLA).PLA has shown great potential to replace petroleum-based plastics.In this study,seven different samples of unmodified Pueraria lobata root powder(PRP)with different contents(i.e.,0,5,10,15,20,25,and 30 wt%)and three different modified PRPs(i.e.,treated with NaOH,NaOH-KH-550,and Formic)were used to reinforce polylactic acid(PLA)via solution casting process.These prepared PRP/PLA composite films were characterized using SEM,FTIR,UV-visible spectra analysis,TG,DSC,weight loss measurement(wt%),and mechanical measurements.The results showed that the PRP modified with KH-550(PRPK)intensified the interaction in the interface region between the PRP and the PLA matrix,thus increasing the tensile strength(54.5 MPa),elongation at break(2.8%),and Young’s modulus(3310 MPa)of the PRPK/PLA biofilms.Contact angle measurement showed that the PRP treatments contributed to the hydrophobicity of films.The transparency of PRP-10/PLA film atλ_(800)was 11.09%,and its UVA and UVB transmittance were 3.28 and 1.16,respectively.After blending PLA with PRP,the PRP/PLA composite films exhibited excellent biodegradability.In summary,PRPK improved the mechanical properties of PLA and prevented the films from ultraviolet light,suggesting that PRPK-5/PLA film could be used as packaging materials.展开更多
The main objective of this work was to study and develop composite materials by experiments with mixtures of synthetic(glass fiber, carbon fiber) and natural fiber(durian skin fiber) reinforcements on a polylactic aci...The main objective of this work was to study and develop composite materials by experiments with mixtures of synthetic(glass fiber, carbon fiber) and natural fiber(durian skin fiber) reinforcements on a polylactic acid(PLA) matrix composite, because of its excellent mechanical properties. Durian skin fiber(DSF) is a natural waste throughout Thailand, and an alternative to recycling is to realize its potential as a new reinforcement through mixing and the injection molding processes. The flexural strength(σ_(F)) and flexural modulus(E_(F)) of the composites from specimens showed a maximum value by content of durian skin fiber at 10 wt%, for good performance relative to particle dispersion between the matrix and the fiber, and showed a minimum value by content of durian skin fiber at 20 wt%, because the reinforcement material affects the mechanical properties in the experiments.展开更多
At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional...At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.展开更多
The present study aimed to understand the effect of dielectric barrier discharge cold plasma(DBD-CP)technology on the antimicrobial chitosan deposition and the properties enhancement of polylactic acid(PLA)films.The r...The present study aimed to understand the effect of dielectric barrier discharge cold plasma(DBD-CP)technology on the antimicrobial chitosan deposition and the properties enhancement of polylactic acid(PLA)films.The results indicated that DBD-CP was an effective method for improving the adhesion and surface hydrophilicity of PLA,facilitating the deposition of chitosan coating.This modification was attributed to the increased surface roughness,as well as the presence of polar functional groups observed through atomic force microscopy,surface free energy and Fourier transform infrared spectroscopy analysis.The study further revealed that both water resistance and mechanical properties were significantly improved after DBD-CP treatment,which was positively correlated with the amount of chitosan deposited on the PLA surfaces.Following comprehensive evaluation,the treatment at 75 W was determined as the optimal condition for enhancing the properties.Additionally,the modified film exhibited strong antimicrobial activity against Staphylococcus aureus.Consequently,the DBD-CP technology could be a promising tool for better utilization of PLA-based materials in the antibacterial food packaging industry.展开更多
The objective of this study was to investigate the effect of lactic acid bacteria(LAB) inoculums on fermentation quality and in vitro digestibility of corn stover silage.Corn stover was ensiled without(control) or wit...The objective of this study was to investigate the effect of lactic acid bacteria(LAB) inoculums on fermentation quality and in vitro digestibility of corn stover silage.Corn stover was ensiled without(control) or with Lactobacillus plantarum(LP),Enterococcus faecalis(EF),and Enterococcus mundtii(EM) for 45 days.The fermentation characteristics were assessed,and subsequent in vitro dry matter digestibility(DM-D),neutral detergent fiber digestibility(NDF-D),volatile fatty acids(VFA),methane(CH4) production,cellulolytic bacteria proportions and their activities per corn stover silage were also determined.There was no significant difference(P>0.05) among the silage pH,lactic acid,crude protein(CP),water soluble carbohydrates(WSC) and lignocelluloses contents of different treatments.The relative proportions of Ruminococcus flavefaciens and Fibrobacter succinogenes,carboxymethyl-ocellulose and β-glycosidase activities,DM-D,NDF-D,and VFA production of in vitro incubation was higher(P<0.05) for silages inoculated with LP and EF than those of the control silage.Silage inoculated with LP showed the lowest(P<0.05) CH4 production per unit yield of VFA,which was positively corresponded to the lowest(P<0.05) ratio of acetate to propionate.In summary,the ensiling fermentation quality and subsequent utilization of corn stover silage were efficiently improved by inoculated with L.plantarum.展开更多
The effect of Ti3C2 MXene nanosheets on the intumescent flame retardant(IFR)poly(lactic acid)(PLA)composites was investigated among a series of PLA/IFR/MXene,which were prepared by melt blending 0-2.0 wt%MXene,10.0 wt...The effect of Ti3C2 MXene nanosheets on the intumescent flame retardant(IFR)poly(lactic acid)(PLA)composites was investigated among a series of PLA/IFR/MXene,which were prepared by melt blending 0-2.0 wt%MXene,10.0 wt%-12.0 wt%IFR and PLA together.The results of limiting oxygen index(LOI)and vertical burning(UL-94)discover that the combination of 0.5 wt%MXene and 11.5 wt%IFR synergistically improves the fire safety of PLA to reach UL-94 V-0 rating with LOI value of 33.0%.The PLA/IFR/MXene composites perform an obvious reduction in peak of heat release rate(HRR)in cone calorimeter tests(CCTs).Furthermore,the carbon residues after CCTs were characterized by scanning electron microscope(SEM),laser Raman spectroscopy(LRS),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).It is demonstrated that both the titanium composition of the MXene structure and the characteristics of the two-dimensional material enhance the PLA/IFR/MXene composite materials’ability to produce a dense barrier layer to resist burnout during thermal degradation.展开更多
According to the sequence of the bile salt hydrolase (BSH) gene of Bifidobacterium and the restriction enzyme cutting sites of expression vector pNZ8148, primers were designed and the bile salt hydrolase (BSH) gene wa...According to the sequence of the bile salt hydrolase (BSH) gene of Bifidobacterium and the restriction enzyme cutting sites of expression vector pNZ8148, primers were designed and the bile salt hydrolase (BSH) gene was gotten from Bacillus bifidus ATCC 29521 by PCR. BSH gene was inserted into lactic acid bacteria expression vector pNZ8148 to construct the recombinant pNZ8148-BSH. The recombinant pNZ8148-BSH was transferred into lactic acid bacteria NZ9000 with electrotransformation method. And the recombinant which could express BSH protein was obtained. It was identified by SDS-PAGE electrophoresis and activity verification. The result could provide a rationale reference for expressing BSH in lactic acid bacteria.展开更多
Tuberculosis(TB) is a communicable disease caused by Mycobacterium tuberculosis(M. tuberculosis). WHO estimated that 10.4 million new(incident) TB cases worldwide in year 2016. The increased prevalence of drug resista...Tuberculosis(TB) is a communicable disease caused by Mycobacterium tuberculosis(M. tuberculosis). WHO estimated that 10.4 million new(incident) TB cases worldwide in year 2016. The increased prevalence of drug resistant strains and side effects associated with the current anti-tubercular drugs make the treatment options more complicated. Hence, there are necessities to identify new drug candidates to fight against various sub-populations of M. tuberculosis with less or no toxicity/side effects and shorter treatment duration. Bacteriocins produced by lactic acid bacteria(LAB) attract attention of researchers because of its "Generally recognized as safe" status. LAB and its bacteriocins possess an effective antimicrobial activity against various bacteria and fungi. Interestingly bacteriocins such as nisin and lacticin 3147 have shown antimycobacterial activity in vitro. As probiotics, LAB plays a vital role in promoting various health benefits including ability to modulate immune response against various infectious diseases. LAB and its metabolic products activate immune system and thereby limiting the M. tuberculosis pathogenesis. The protein and peptide engineering techniques paved the ways to obtain hybrid bacteriocin derivatives from the known peptide sequence of existing bacteriocin. In this review, we focus on the antimycobacterial property and immunomodulatory role of LAB and its metabolic products. Techniques for large scale synthesis of potential bacteriocin with multifunctional activity and enhanced stability are also discussed.展开更多
A novel conductive drug-loading system was prepared by using an improved emulsion electrostatic spinning method which contained polylactic acid (PLA),graphene oxide (GO),and nerve growth factor (NGF) coated with bovin...A novel conductive drug-loading system was prepared by using an improved emulsion electrostatic spinning method which contained polylactic acid (PLA),graphene oxide (GO),and nerve growth factor (NGF) coated with bovine serum albumin (BSA) nanoparticles.Firstly,the structure,mechanical properties,morphology and electrical conductivity of PLA/GO electro spun fiber membranes with different GO ratios were characterized.PLA/GO scaffolds can exhibit superior porosity,hydrophilic and biomechanical properties when the GO incorporation rate is 0.5%.The addition of GO in the PLA/GO electro spun fiber membranes can also create appropriate pH environment for the repair of injured nerve when the GO incorporation rate is above 0.5%.Secondly,PLA/GO/BSA/Genipin/NGF particles (with a ratio of BSA/NGF=3:1) prepared by modified emulsion electro spinning method will release more NGF than PLA/GO/NGF particles.In addition,PLA/0.5%GO/NGF scaffold can maintain its structure stability for at least 8 weeks observed by scanning electron microscope (SEM).Moreover,the degradation of PLA/0.5%GO/NGF scaffold is consistent with its weight loss.Finally,in vitro assay confirmes that PLA/GO composite scaffold exhibits low cytotoxicity to RSC96 cells.Cellular results have demonstrated that PLA/0.5%GO/NGF sustained-release drug sustained-release system with appropriate electrical stimulation (ES) can promote PC12 cell proliferation,and it can maintain its differentiation capability for at least 3 weeks.In conclusion,PLA/0.5%GO/NGF sustained-release drug sustained-release system can maintain its biological activity for at least 3 weeks and promote cell proliferation with appropriate ES.展开更多
Objective: To study some soybean cultivars commonly used in Northern Thailand that exhibit high nutritional profile and to investigate the changes in bioactive principles and antioxidant capacity of the fermented soy ...Objective: To study some soybean cultivars commonly used in Northern Thailand that exhibit high nutritional profile and to investigate the changes in bioactive principles and antioxidant capacity of the fermented soy broth that was prepared using the selected soybean cultivar and Lactobacillus paracasei HII02 mediated fermentation process.Methods: The best soybean cultivar was subjected to fermentation, and then analyzed the phytochemical, antioxidant and nutritional changes by high performance liquid chromatography and spectrophotometric analysis.Results: Sor Jor 2 soybean cultivar showed rich nutritional profile and was subjected to fermentation process. Lactobacillus paracasei HII02 mediated fermentation of Sor Jor 2 soybean exhibited stable physical and chemical characteristics. Lactic acid bacteria mediated fermentation also increased the aglycone forms of isoflavone content, exhibited antioxidant capacity and thereby enhanced the quality of the fermented soy broth. It also prevented the growth of coliforms in fermented soybean.Conclusions: The study results suggest that fermented soybean is rich in nutrition and considered to be safe for consumption for the improvement of health and to treat the malnutrition.展开更多
Objective: To investigate the antibacterial effect of selected lactic acid bacteria(LAB)biofilms on the planktonic and biofilm population of methicillin-resistant Staphylococcus aureus(MRSA)(S547).Methods: In this stu...Objective: To investigate the antibacterial effect of selected lactic acid bacteria(LAB)biofilms on the planktonic and biofilm population of methicillin-resistant Staphylococcus aureus(MRSA)(S547).Methods: In this study, biofilm-forming LAB were isolated from tairu and kefir. Isolate Y1 and isolate KF were selected based on their prominent inhibition against test pathogens(using spot-on-agar method and agar-well-diffusion assay) and efficient biofilm production(using tissue culture plate method). They were then identified as Lactobacillus casei(L. casei) Y1 and Lactobacillus plantarum(L. plantarum) KF, respectively using16 S r DNA gene sequencing. The influence of incubation time, temperature and aeration on the biofilm production of L. casei Y1 and L. plantarum KF was also investigated using tissue culture plate method. The inhibitory activity of both the selected LAB biofilms was evaluated against MRSA(Institute for Medical Research code: S547) using L. plantarum ATCC 8014 as the reference strain.Results: L. casei Y1 showed the highest reduction of MRSA biofilms, by 3.53 log at48 h while L. plantarum KF records the highest reduction of 2.64 log at 36 h. In inhibiting planktonic population of MRSA(S547), both L. casei Y1 and L. plantarum KF biofilms recorded their maximum reduction of 4.13 log and 3.41 log at 24 h, respectively. Despite their inhibitory effects being time-dependent, both LAB biofilms exhibited good potential in controlling the biofilm and planktonic population of MRSA(S547).Conclusions: The results from this study could highlight the importance of analysing biofilms of LAB to enhance their antibacterial efficacy. Preferably, these protective biofilms of LAB could also be a better alternative to control the formation of biofilms by pathogens such as MRSA.展开更多
基金This work was supported by the Anhui Provincial Natural Science Foundation(Grant No.2308085QB69)the Institute of Energy,Hefei Comprehensive National Science Center(Grant No.21KZS210).
文摘Ni-rich layered oxides are potential cathode materials for next-generation high energy density Li-ion batteries due to their high capacity and low cost.However,the inherently unstable surface properties,including high levels of residual Li compounds,dissolution of transition metal cations,and parasitic side reactions,have not been effectively addressed,leading to significant degradation in their electrochemical performance.In this study,we propose a simple and effective lactic acid-assisted interface engineering strategy to regulate the surface chemistry and properties of Ni-rich LiNi_(0.8)Co_(0.1)Mr_(0.1)O_(2) cathode.This novel surface treatment method successfully eliminates surface residual Li compounds,inhibits structural collapse,and mitigates cathode-electrolyte interface film growth.As a result,the lactic acidtreated LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) achieved a remarkable capacity retention of 91.7% after 100 cycles at 0.5 C(25℃) and outstanding rate capability of 149.5 mA h g^(-1) at 10 C,significantly outperforming the pristine material.Furthermore,a pouch-type full cell incorporating the modified LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode demonstrates impressive long-term cycle life,retaining 81.5% of its capacity after 500 cycles at 1 C.More importantly,the thermal stability of the modified cathode is also dramatically improved.This study offers a valuable surface modification strategy for enhancing the overall performance of Ni-rich cathode materials.
基金supported by the National Key Research and Development Program of China(2021YFD2100902-3)the National Natural Science Foundation of China(32072258)+5 种基金Major Science and Technology Program of Heilongjiang(2020ZX08B02)Harbin University of Commerce“Young Innovative Talents”Support Program(2019CX062020CX262020CX27)the Central Financial Support for the Development of Local Colleges and Universities,Graduate Innovation Research Project of Harbin University of Commerce(YJSCX2021-698HSD)Training plan of Young Innovative Talents in Universities of Heilongjiang(UNPYSCT-2020218).
文摘The effects of 5 lactic acid bacteria(LAB)fermentation on the pasting properties of glutinous rice flour were compared,and suitable fermentation strains were selected based on the changes of viscosity,setback value,and breakdown value to prepare LAB compound starter cultures.The results revealed that Latilactobacillus sakei HSD004 and Lacticaseibacillus rhamnosus HSD005 had apparent advantages in increasing the viscosity and reducing the setback and breakdown values of glutinous rice flour.In particular,the compound starter created using the two abovementioned LAB in the ratio of 3:1 had better performance than that using a single LAB in improving the pasting properties and increasing the water and oil absorption capacity of glutinous rice flour.Moreover,the gelatinization enthalpy of the fermented samples increased significantly.For frozen glutinous rice dough stored for 28 days,the viscoelasticity of frozen dough prepared by compound starter was better than that of control dough,and the freezable water content was lower than that of control dough.These results indicate that compound LAB fermentation is a promising technology in the glutinous rice-based food processing industry,which has significance for its application.
基金supported by the National Natural Science Foundation of China(32102605)the Agricultural Science and Technology Innovation Program under Grant(CAAS-ASTIP-2020-IAR)。
文摘Food allergy as a global health problem threatens food industry.Bee pollen(BP)is a typical food with allergenic potentials,although it performs various nutritional/pharmacological functions to humans.In this study,lactic acid bacteria(LAB)were used to ferment Brassica napus BP for alleviating its allergenicity.Four novel allergens(glutaredoxin,oleosin-B2,catalase and lipase)were identified with significant decreases in LAB-fermented BP(FBP)than natural BP by proteomics.Meanwhile,metabolomics analysis showed significant increases of 28 characteristic oligopeptides and amino acids in FBP versus BP,indicating the degradation of LAB on allergens.Moreover,FBP showed alleviatory effects in BALB/c mice,which relieved pathological symptoms and lowered production of allergic mediators.Microbial high-throughput sequencing analysis showed that FBP could regulate gut microbiota and metabolism to strengthen immunity,which were closely correlated with the alleviation of allergic reactivity.These findings could contribute to the development and utilization of hypoallergenic BP products.
基金financially supported by National Natural Science Foundation of China (22068018)Yunnan Ten Thousand Talents Plan Young & Elite Talents Project。
文摘Drug-loaded microspheres are significant for the development of modern pharmaceutical products. It is well known that the taken of aspirin for long-term increases the risk of serious gastrointestinal complications, therefore a controllable delivery of aspirin is of importance to lighten those side effects. In this work, poly(lactic acid)(PLA) was chosen as the carrier to prepare PLA-aspirin microspheres by using the traditional and the improved solvent evaporation methods. It was found that no matter which experimental condition was, the encapsulation efficiency of aspirin was higher by using the improved method than that of the traditional method. Specifically, when the concentration of polyvinyl alcohol = 1%(mass),the polymer concentration = 1:20, the oil/water rate = 1:2.5, PLA-aspirin microspheres were obtained via the improved method with a high yield of 82.83%(mass) and an encapsulation efficiency of 44.09%. PLAaspirin microspheres were then prepared continuously using the improved method, which further enhanced the encapsulation efficiency to 54.56%. Approximate 85% aspirin released from microspheres within 7 days. Obvious degradation which was represented by reduction on hardness was observed by soaking microspheres in PBS for 60 days. This work is of interest because it provides a continuous route to prepare PLA-aspirin microspheres continuously with a high drug encapsulation efficiency.
基金supported by the National Natural Science Foundation of China(31872362 and 32072688)the Agricultural Science and Technology Independent Innovation Fund Project of Jiangsu Province[CX(19)1006].
文摘Background:Lactic acid bacteria(LAB)participating in milk fermentation naturally release and enrich the fermented dairy product with a broad range of bioactive metabolites,which has numerous roles in the intestinal health-promot-ing of the consumer.However,information is lacking regarding the application prospect of LAB fermented milk in the animal industry.This study investigated the effects of lactic acid bacteria-fermented formula milk(LFM)on the growth performance,intestinal immunity,microbiota composition,and transcriptomic responses in weaned piglets.A total of 24 male weaned piglets were randomly divided into the control(CON)and LFM groups.Each group consisted of 6 replicates(cages)with 2 piglets per cage.Each piglet in the LFM group were supplemented with 80 mL LFM three times a day,while the CON group was treated with the same amount of drinking water.Results:LFM significantly increased the average daily gain of piglets over the entire 14 d(P<0.01)and the average daily feed intake from 7 to 14 d(P<0.05).Compared to the CON group,ileal goblet cell count,villus-crypt ratio,sIgA,and lactate concentrations in the LFM group were significantly increased(P<0.05).Transcriptomic analysis of ileal mucosa identified 487 differentially expressed genes(DEGs)between two groups.Especially,DEGs involved in the intestinal immune network for IgA production pathways,such as polymeric immunoglobulin receptor(PIGR),were significantly up-regulated(P<0.01)by LFM supplementation.Moreover,trefoil factor 2(TFF2)in the LFM group,one of the DEGs involved in the secretory function of goblet cells,was also significantly up-regulated(P<0.01).Sequenc-ing of the 16S rRNA gene of microbiota demonstrated that LFM led to selective enrichment of lactate-producing and short-chain fatty acid(SCFA)-producing bacteria in the ileum,such as an increase in the relative abundance of Entero-coccus(P=0.09)and Acetitomaculum(P<0.05).Conclusions:LFM can improve intestinal health and immune tolerance,thus enhancing the growth performance of weaned piglets.The changes in microbiota and metabolites induced by LFM might mediate the regulation of the secretory function of goblet cells.
基金the funds from National Natural Science Foundation of China (22078365, 21706290)Natural Science Foundation of Shandong Province (ZR2017MB004)+2 种基金Innovative Research Funding from Qingdao City, Shandong Province (17-1-1-80-jch)Fundamental Research Funds for the Central Universities and Development Fund of State Key Laboratory of Heavy Oil Processing (17CX02017A, 20CX02204A)New Faculty Start-Up Funding from China University of Petroleum (YJ201601059)
文摘With increasing strict regulation on single-use plastics,lactic acid(LA)and alkyl lactates,as essential monomers for bio-degradable polylactic acid(PLA)plastic products,have gained worldwide attention in both academia and industry.While LA is still dominantly produced through fermentation processes from start,chemical synthesis from cellulosic biomass remains a grand challenge,owing to poor selectivity in activating CAH and CAC bonds in sugar molecules.To our best knowledge,recent publications have been focused on hydrothermal conversion of glucose to LA,while this review summarizes the highlights on direct thermal conversion of fructose as starting material to LA and derivatives.In particular,the synergies of metal/metal cations and acid/base catalysts will be critically revised on retro-aldol and dehydration reactions.This work will provide insights into rational design of active and selective catalysts for the production of carboxylic acids from biomass feedstocks.
基金supported by Jiangsu Agriculture Science and Technology Innovatioin Fund(CX(21)2003)。
文摘In this study,a new type of 3 D printed living biological hydrogel was developed by integrating lactic acid bacteria(LAB)into biocompatible and non-toxic polymer materials.Interestingly,the living materials loaded with LAB can be freeze-dried and reused for more than 100 times.The bio-hydrogel can be used to co-culture different LAB and keep its fermentation performance stable in long-term use.The release kinetics model and response surface method were used to simulate and optimize the bacteria release mode in the bio-hydrogel.The results show that the release of bacteria from hydrogel is regulated by the coupling of Fickian diffusion and polymer swelling.The stability of LAB hydrogel was evaluated by reuse experiments.The images of confocal microscopy and scanning electron microscope showed that the bacteria with high cell viability were distributed in the hydrogel and intact structure of the living hydrogel was maintained after 100 times of reuse as yoghurt starter.In conclusion,the 3 D printed LAB bio-hydrogel developed in this study has the advantage of reuse and sustainability,which is expected to open up a new way for the preparation of food culture starter.
文摘Background: Metformin (M) is an effective first-line hypoglycemic agent in obese type 2 diabetes mellitus due to its low cost and safety profile. The Case: A 66-year-man presented with shock due to lactic acidosis induced by M-supersaturation subsequent to acute renal failure following infective diarrhea. The drug has been used, by this patient, for >10 years without complication. Physical examination, laboratory tests, radiological investigations and blood cultures did not show evidence of new cardiac, hepatic and septic insult. Despite discontinuation of M and 2-days of aggressive hydration, bicarbonate infusions and pressors;toxic levels of the drug persisted and shock-state culminated in severe and oliguric renal failure with serum urea and creatinine up to 50 mmol/L and 1270 umol/L, respectively. Hence, continuous venovenous hemodiafiltration (CVVHDF) was used, for 16-hours, to remove the drug, correct his acidosis and support his severe renal complications. Hours after the procedure;drug level, lactic acidosis and its associated shock improved followed by gradual renal recovery. The patient was discharged after 6 days and serum creatinine reached his base line (180 umol/L) 2 weeks later. The drug was not recommended for his future use. Conclusion: M-induced lactic acidosis, should be considered in assessment of shock in M-treated patients and management of unstable patients indicates early-use of CVVHDF.
基金This research was funded by the Xiaohe Talent Project of Zhangjiajie City(No.2022xhrc01)the Research Foundation of Hunan Provincial Education Department(Nos.20A412+1 种基金19C1541)the Natural Science Research Project of Jishou University(No.Jd19005).
文摘Petroleum-based materials,such as plastic,are characterized by adverse environmental pollution;as a result,researchers have sought alternative degradable plastics that are environmentally friendly,such as polylactic acid(PLA).PLA has shown great potential to replace petroleum-based plastics.In this study,seven different samples of unmodified Pueraria lobata root powder(PRP)with different contents(i.e.,0,5,10,15,20,25,and 30 wt%)and three different modified PRPs(i.e.,treated with NaOH,NaOH-KH-550,and Formic)were used to reinforce polylactic acid(PLA)via solution casting process.These prepared PRP/PLA composite films were characterized using SEM,FTIR,UV-visible spectra analysis,TG,DSC,weight loss measurement(wt%),and mechanical measurements.The results showed that the PRP modified with KH-550(PRPK)intensified the interaction in the interface region between the PRP and the PLA matrix,thus increasing the tensile strength(54.5 MPa),elongation at break(2.8%),and Young’s modulus(3310 MPa)of the PRPK/PLA biofilms.Contact angle measurement showed that the PRP treatments contributed to the hydrophobicity of films.The transparency of PRP-10/PLA film atλ_(800)was 11.09%,and its UVA and UVB transmittance were 3.28 and 1.16,respectively.After blending PLA with PRP,the PRP/PLA composite films exhibited excellent biodegradability.In summary,PRPK improved the mechanical properties of PLA and prevented the films from ultraviolet light,suggesting that PRPK-5/PLA film could be used as packaging materials.
文摘The main objective of this work was to study and develop composite materials by experiments with mixtures of synthetic(glass fiber, carbon fiber) and natural fiber(durian skin fiber) reinforcements on a polylactic acid(PLA) matrix composite, because of its excellent mechanical properties. Durian skin fiber(DSF) is a natural waste throughout Thailand, and an alternative to recycling is to realize its potential as a new reinforcement through mixing and the injection molding processes. The flexural strength(σ_(F)) and flexural modulus(E_(F)) of the composites from specimens showed a maximum value by content of durian skin fiber at 10 wt%, for good performance relative to particle dispersion between the matrix and the fiber, and showed a minimum value by content of durian skin fiber at 20 wt%, because the reinforcement material affects the mechanical properties in the experiments.
基金supported by the National Natural Science Foundation of China(No.81171731)the Project of Chengdu Science and Technology Bureau(Nos.2021-YF05-01619-SN and 2021-RC05-00022-CG)+2 种基金the Science and Technology Project of Tibet Autonomous Region(Nos.XZ202202YD0013C and XZ201901-GB-08)the Sichuan Science and Technology Program(No.2022YFG0066)the 1·3·5 Project for Disciplines of Excellence,West China Hospital,Sichuan University(Nos.ZYJC21026,ZYGD21001 and ZYJC21077).
文摘At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.
基金This work was financially assisted by the National Natural Science Foundation of China(32101875)China Postdoctoral Science Foundation(2021M702458).
文摘The present study aimed to understand the effect of dielectric barrier discharge cold plasma(DBD-CP)technology on the antimicrobial chitosan deposition and the properties enhancement of polylactic acid(PLA)films.The results indicated that DBD-CP was an effective method for improving the adhesion and surface hydrophilicity of PLA,facilitating the deposition of chitosan coating.This modification was attributed to the increased surface roughness,as well as the presence of polar functional groups observed through atomic force microscopy,surface free energy and Fourier transform infrared spectroscopy analysis.The study further revealed that both water resistance and mechanical properties were significantly improved after DBD-CP treatment,which was positively correlated with the amount of chitosan deposited on the PLA surfaces.Following comprehensive evaluation,the treatment at 75 W was determined as the optimal condition for enhancing the properties.Additionally,the modified film exhibited strong antimicrobial activity against Staphylococcus aureus.Consequently,the DBD-CP technology could be a promising tool for better utilization of PLA-based materials in the antibacterial food packaging industry.
基金supported by the National Natural Science Foundation of China(31502015,31672488)the Natural Science Foundation of Shanxi Province of China(2015021162)
文摘The objective of this study was to investigate the effect of lactic acid bacteria(LAB) inoculums on fermentation quality and in vitro digestibility of corn stover silage.Corn stover was ensiled without(control) or with Lactobacillus plantarum(LP),Enterococcus faecalis(EF),and Enterococcus mundtii(EM) for 45 days.The fermentation characteristics were assessed,and subsequent in vitro dry matter digestibility(DM-D),neutral detergent fiber digestibility(NDF-D),volatile fatty acids(VFA),methane(CH4) production,cellulolytic bacteria proportions and their activities per corn stover silage were also determined.There was no significant difference(P>0.05) among the silage pH,lactic acid,crude protein(CP),water soluble carbohydrates(WSC) and lignocelluloses contents of different treatments.The relative proportions of Ruminococcus flavefaciens and Fibrobacter succinogenes,carboxymethyl-ocellulose and β-glycosidase activities,DM-D,NDF-D,and VFA production of in vitro incubation was higher(P<0.05) for silages inoculated with LP and EF than those of the control silage.Silage inoculated with LP showed the lowest(P<0.05) CH4 production per unit yield of VFA,which was positively corresponded to the lowest(P<0.05) ratio of acetate to propionate.In summary,the ensiling fermentation quality and subsequent utilization of corn stover silage were efficiently improved by inoculated with L.plantarum.
基金support from the National Natural Science Foundation of China(Grant Nos.21908031 and 51903092)the China Postdoctoral Science Foundation funded project(Grant No.2019M652884)support from Guangdong Special Support Program(Grant No.2017TX04N371)。
文摘The effect of Ti3C2 MXene nanosheets on the intumescent flame retardant(IFR)poly(lactic acid)(PLA)composites was investigated among a series of PLA/IFR/MXene,which were prepared by melt blending 0-2.0 wt%MXene,10.0 wt%-12.0 wt%IFR and PLA together.The results of limiting oxygen index(LOI)and vertical burning(UL-94)discover that the combination of 0.5 wt%MXene and 11.5 wt%IFR synergistically improves the fire safety of PLA to reach UL-94 V-0 rating with LOI value of 33.0%.The PLA/IFR/MXene composites perform an obvious reduction in peak of heat release rate(HRR)in cone calorimeter tests(CCTs).Furthermore,the carbon residues after CCTs were characterized by scanning electron microscope(SEM),laser Raman spectroscopy(LRS),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).It is demonstrated that both the titanium composition of the MXene structure and the characteristics of the two-dimensional material enhance the PLA/IFR/MXene composite materials’ability to produce a dense barrier layer to resist burnout during thermal degradation.
基金Supported by 863 Projects (2008AA10Z311)National Science and Technology Support Projects (2009BADB9B06)+1 种基金Started Post-doctoral Research Grant of Heilongjiang Province (LBH-Q07023)Harbin Technological Innovation of Special Funds (2007RFQXN020)
文摘According to the sequence of the bile salt hydrolase (BSH) gene of Bifidobacterium and the restriction enzyme cutting sites of expression vector pNZ8148, primers were designed and the bile salt hydrolase (BSH) gene was gotten from Bacillus bifidus ATCC 29521 by PCR. BSH gene was inserted into lactic acid bacteria expression vector pNZ8148 to construct the recombinant pNZ8148-BSH. The recombinant pNZ8148-BSH was transferred into lactic acid bacteria NZ9000 with electrotransformation method. And the recombinant which could express BSH protein was obtained. It was identified by SDS-PAGE electrophoresis and activity verification. The result could provide a rationale reference for expressing BSH in lactic acid bacteria.
基金supported by Sathyabama Institute of Science and Technology,Chennai,Tamil Nadu,India and Indian Council of Medical Research(ICMR),New Delhi,India(Ref.No:5/8/5/19/2014-ECD-I)
文摘Tuberculosis(TB) is a communicable disease caused by Mycobacterium tuberculosis(M. tuberculosis). WHO estimated that 10.4 million new(incident) TB cases worldwide in year 2016. The increased prevalence of drug resistant strains and side effects associated with the current anti-tubercular drugs make the treatment options more complicated. Hence, there are necessities to identify new drug candidates to fight against various sub-populations of M. tuberculosis with less or no toxicity/side effects and shorter treatment duration. Bacteriocins produced by lactic acid bacteria(LAB) attract attention of researchers because of its "Generally recognized as safe" status. LAB and its bacteriocins possess an effective antimicrobial activity against various bacteria and fungi. Interestingly bacteriocins such as nisin and lacticin 3147 have shown antimycobacterial activity in vitro. As probiotics, LAB plays a vital role in promoting various health benefits including ability to modulate immune response against various infectious diseases. LAB and its metabolic products activate immune system and thereby limiting the M. tuberculosis pathogenesis. The protein and peptide engineering techniques paved the ways to obtain hybrid bacteriocin derivatives from the known peptide sequence of existing bacteriocin. In this review, we focus on the antimycobacterial property and immunomodulatory role of LAB and its metabolic products. Techniques for large scale synthesis of potential bacteriocin with multifunctional activity and enhanced stability are also discussed.
基金Funded by the National Natural Science Foundation of China(No.51572206)the Wuhan Huanghe Excellence Plan+1 种基金Natural Science Foundation of Hubei(2018CFB487)the National Innovation and Entrepreneurship Training Program for College Students(Nos.202010497028,202010497030,and 202010497062)。
文摘A novel conductive drug-loading system was prepared by using an improved emulsion electrostatic spinning method which contained polylactic acid (PLA),graphene oxide (GO),and nerve growth factor (NGF) coated with bovine serum albumin (BSA) nanoparticles.Firstly,the structure,mechanical properties,morphology and electrical conductivity of PLA/GO electro spun fiber membranes with different GO ratios were characterized.PLA/GO scaffolds can exhibit superior porosity,hydrophilic and biomechanical properties when the GO incorporation rate is 0.5%.The addition of GO in the PLA/GO electro spun fiber membranes can also create appropriate pH environment for the repair of injured nerve when the GO incorporation rate is above 0.5%.Secondly,PLA/GO/BSA/Genipin/NGF particles (with a ratio of BSA/NGF=3:1) prepared by modified emulsion electro spinning method will release more NGF than PLA/GO/NGF particles.In addition,PLA/0.5%GO/NGF scaffold can maintain its structure stability for at least 8 weeks observed by scanning electron microscope (SEM).Moreover,the degradation of PLA/0.5%GO/NGF scaffold is consistent with its weight loss.Finally,in vitro assay confirmes that PLA/GO composite scaffold exhibits low cytotoxicity to RSC96 cells.Cellular results have demonstrated that PLA/0.5%GO/NGF sustained-release drug sustained-release system with appropriate electrical stimulation (ES) can promote PC12 cell proliferation,and it can maintain its differentiation capability for at least 3 weeks.In conclusion,PLA/0.5%GO/NGF sustained-release drug sustained-release system can maintain its biological activity for at least 3 weeks and promote cell proliferation with appropriate ES.
基金Chiang Mai University provided the financial supports for Innovation Center for Holistic Health,Nutraceuticals,and Cosmeceuticals(CMUgrant sanction,Dated:1 October 2016)
文摘Objective: To study some soybean cultivars commonly used in Northern Thailand that exhibit high nutritional profile and to investigate the changes in bioactive principles and antioxidant capacity of the fermented soy broth that was prepared using the selected soybean cultivar and Lactobacillus paracasei HII02 mediated fermentation process.Methods: The best soybean cultivar was subjected to fermentation, and then analyzed the phytochemical, antioxidant and nutritional changes by high performance liquid chromatography and spectrophotometric analysis.Results: Sor Jor 2 soybean cultivar showed rich nutritional profile and was subjected to fermentation process. Lactobacillus paracasei HII02 mediated fermentation of Sor Jor 2 soybean exhibited stable physical and chemical characteristics. Lactic acid bacteria mediated fermentation also increased the aglycone forms of isoflavone content, exhibited antioxidant capacity and thereby enhanced the quality of the fermented soy broth. It also prevented the growth of coliforms in fermented soybean.Conclusions: The study results suggest that fermented soybean is rich in nutrition and considered to be safe for consumption for the improvement of health and to treat the malnutrition.
基金Funding for this project was provided by Fundamental Research Grant Scheme(FRGS)of the Ministry of Higher Education,Malaysia(zuhainis@upm.edu.my)(Grant number:5524488)
文摘Objective: To investigate the antibacterial effect of selected lactic acid bacteria(LAB)biofilms on the planktonic and biofilm population of methicillin-resistant Staphylococcus aureus(MRSA)(S547).Methods: In this study, biofilm-forming LAB were isolated from tairu and kefir. Isolate Y1 and isolate KF were selected based on their prominent inhibition against test pathogens(using spot-on-agar method and agar-well-diffusion assay) and efficient biofilm production(using tissue culture plate method). They were then identified as Lactobacillus casei(L. casei) Y1 and Lactobacillus plantarum(L. plantarum) KF, respectively using16 S r DNA gene sequencing. The influence of incubation time, temperature and aeration on the biofilm production of L. casei Y1 and L. plantarum KF was also investigated using tissue culture plate method. The inhibitory activity of both the selected LAB biofilms was evaluated against MRSA(Institute for Medical Research code: S547) using L. plantarum ATCC 8014 as the reference strain.Results: L. casei Y1 showed the highest reduction of MRSA biofilms, by 3.53 log at48 h while L. plantarum KF records the highest reduction of 2.64 log at 36 h. In inhibiting planktonic population of MRSA(S547), both L. casei Y1 and L. plantarum KF biofilms recorded their maximum reduction of 4.13 log and 3.41 log at 24 h, respectively. Despite their inhibitory effects being time-dependent, both LAB biofilms exhibited good potential in controlling the biofilm and planktonic population of MRSA(S547).Conclusions: The results from this study could highlight the importance of analysing biofilms of LAB to enhance their antibacterial efficacy. Preferably, these protective biofilms of LAB could also be a better alternative to control the formation of biofilms by pathogens such as MRSA.
