In designing efficient perovskite solar cells(PSCs),the selection of suitable electron transport layers(ETLs)is critical to the final device performance as they determine the driving force for selective charge extract...In designing efficient perovskite solar cells(PSCs),the selection of suitable electron transport layers(ETLs)is critical to the final device performance as they determine the driving force for selective charge extraction.SnO_(2)nanoparticles(NPs)based ETLs have been a popular choice for PSCs due to superior electron mobility,but their relatively deep-lying conduction band energy levels(ECB)result in substantial potential loss.Meanwhile,TiO_(2)NPs establish favorable band alignment owing to shallower ECB,but their low intrinsic mobility and abundant surface trap sites impede the final performance.For this reason,constructing a cascaded bilayer ETL is highly desirable for efficient PSCs,as it can rearrange energy levels and exploit on advantages of an individual ETL.In this study,we prepare SnO_(2)NPs and acetylacetone-modified TiO_(2)(Acac-TiO_(2))NPs and implement them as bilayer SnO_(2)/Acac-TiO_(2)(BST)ETL,to assemble cascaded energy band structure.SnO_(2)contributes to rapid charge carrier transport from high electron mobility while Acac-TiO_(2)minimizes band-offset and effectively suppresses interfacial recombination.Accordingly,the optimized BST ETL generates synergistic influence and delivers power conversion efficiency(PCE)as high as 23.14%with open-circuit voltage(V_(oc))reaching 1.14 V.Furthermore,the BST ETL is transferred to a large scale and the corresponding mini module demonstrates peak performance of 18.39%PCE from 25 cm^(2)aperture area.Finally,the BST-based mini module exhibit excellent stability,maintaining 83.1%of its initial efficiency after 1000 h under simultaneous 1 Sun light-soaking and damp heat(85℃/RH 85%)environment.展开更多
AIM: To evaluate the outcomes of trabeculectomy with large area mitomycin-C(MMC) application as a first line treatment in advanced glaucoma. ·METHODS: The records of 55 patients with severe visual field defects u...AIM: To evaluate the outcomes of trabeculectomy with large area mitomycin-C(MMC) application as a first line treatment in advanced glaucoma. ·METHODS: The records of 55 patients with severe visual field defects undergoing trabeculectomy were retrospectively reviewed. The patients were classified as first-line therapy to either early trabeculectomy(initial trabeculectomy-Group 1) or long term medical therapy followed by trabeculectomy(primary trabeculectomy-Group 2). Trabeculectomy was performed with large-area MMC application. Intraocular pressure(IOP) values,visual acuities,mean deviations,morphology and function of the blebs,necessity for anti-glaucomatous medications and surgical complications were reported. ·RESULTS: There were 20 eyes of 18 patients in Group 1 and 37 eyes of 37 patients in Group 2. The mean preoperative IOPs in Groups 1 and 2 were 40.2±10.0mmHg(27-68mmHg) and 29.0±4.4mmHg(21-41mmHg),respectively(P=0.001). Average preoperative mean deviations(MD) in Groups 1 and 2 were 17.4±2.8dB(13.3-23dB) and 17.9± 2.4dB(13.7-23.2dB),respectively(P=0.441). Postoperative IOPs significantly decreased and were comparable in both Groups. The mean number of medications was significantly higher in Group 2(P =0.005). No cystic bleb formation was observed in Group 1,whereas 4 patients from Group 2(10.8%) developed cystic bleb(P =0.040). No visually devastating complication has occurred in both Groups. ·CONCLUSION: Initial trabeculectomy with large areaMMC application might be applied in patients with advanced glaucoma with low complication rates. Long-term topically applied anti-glaucomatous medications seem to increase the risk of cystic bleb formation.展开更多
We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer...We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer graphene oxide sheets can be chemically reduced by HNO3 and HI to form a highly conductive graphene film on a substrate at lower temperature. The reduced graphene oxide sheets show a high conductivity sheet with resistance of 476Ω/sq and transmittance of 76% at 550nm （6 layers）. The technique used to produce the transparent conductive graphene thin film is facile, inexpensive, and can be tunable for a large area production applied for electronics or touch screens.展开更多
Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs ...Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs can be as low as less than 1.0 mΩ(77 K, 10 GHz).Homogenousity of the properties around the plane was studied.Under the measnous distributions.Influences of substrate temperature and Ar and O2 pressures on properties of the double-sided thin films were discussed.展开更多
By utilization of different excitation power sources, linear plasma sources can be differentiated into DC, RF, VHF, microwave and dual frequency types. Through installing several linear plasma sources in parallel or a...By utilization of different excitation power sources, linear plasma sources can be differentiated into DC, RF, VHF, microwave and dual frequency types. Through installing several linear plasma sources in parallel or adopting the so-called roll-to-roll （air-to-air） process, scale uniform linear plasma sources were realized and successfully applied to the deposition of large area uniform dielectric thin films, Furthermore, the magnetic field system can effectively reduce the recombination losses on the wall of the vacuum chamber and enhance the plasma density. Linear plasma sources with approximately one square meter deposition area with the plasma density of 1011 cm 3 have been developed, some of which have been used for the deposition of dielectric layers and large area plasma etching.展开更多
Halide perovskites have rapidly attracted considerable attention due to unprecedented properties not seen in traditional semiconductors.In addition to their optoelectronic merits,one advantage of perovskite materials ...Halide perovskites have rapidly attracted considerable attention due to unprecedented properties not seen in traditional semiconductors.In addition to their optoelectronic merits,one advantage of perovskite materials is their solution processability,which opens the door to low-cost and high throughput solution coating strategies for the commercialization of perovskite solar cells(PSCs).Here we review perovskite film fabrication by meniscus coating—a simple and readily scalable manufacturing technique,including blade coating and slot-die coating.We outline the fundamental fluid mechanisms of meniscus coating,discuss drying and crystallization of perovskite in the coating process,and provide an overview of recent progress in meniscus-coated PSCs.展开更多
Objective To summarize the clinical experience of frontotemporal expanded flap with bilateral superficial temporal vessels in repairing large area scar contracture in face and neck.Methods 14 patients with facial and ...Objective To summarize the clinical experience of frontotemporal expanded flap with bilateral superficial temporal vessels in repairing large area scar contracture in face and neck.Methods 14 patients with facial and Cervical scar contracture in our hospital were taken as the research object.With bilateral superficial temporal vessels as pedicles,a 400-600 ml skin dilator was inserted into the forehead and 50-100 ml skin dilator was inserted into the two temporal parts respectively.Within 3-4 months,the water injection volume reaches 2 times of the dilator volume.After maintaining for one month,skin flap transplantation was performed.The frontal flap was reserved for hairline reconstruction,and the flap was cut to cover the area after facial and Cervical scar release to reconstruct the jaw-neck angle.The pedicle division and pedicle trimming were performed 3-4 weeks after operation.Results All the 14 patients completed the operation successfully.The flap expansion time is 5-6 months.The expanded skin flap covers an area of 26 cm×9 cm-42 cm×16 cm,and all the skin flaps survived after operation.Among them,2 patients suffered from flap congestion after flap transplantation.Follow-up for 6-12 months showed that the color and texture of the skin flap were similar to those of facial skin,with natural transition and no obvious bloating.The angle between the lower jaw and the neck is about 90.The anterior flexion,posterior extension,lateral flexion and rotation of the neck are obviously improved compared with the anterior,and the posterior extension is close to normal.Conclusion Frontotemporal expanded flap with bilateral superficial temporal vessels is suitable for patients with large-area scar contracture in face and neck that cannot be repaired after expansion of adjacent local normal tissues.展开更多
Mussel aquaculture and large yellow croaker aquaculture areas and their environmental characteristics in Zhoushan were analyzed using satellite data and in-situ surveys.A new two-step remote sensing method was propose...Mussel aquaculture and large yellow croaker aquaculture areas and their environmental characteristics in Zhoushan were analyzed using satellite data and in-situ surveys.A new two-step remote sensing method was proposed and applied to determine the basic environmental characteristics of the best mussel and large yellow croaker aquaculture areas.This methodology includes the first step of extraction of the location distribution and the second step of the extraction of internal environmental factors.The fishery ranching index(FRI1,FRI2)was established to extract the mussel and the large yellow croaker aquaculture area in Zhoushan,using Gaofen-1(GF-1)and Gaofen-6(GF-6)satellite data with a special resolution of 2 m.In the second step,the environmental factors such as sea surface temperature(SST),chlorophyll a(Chl-a)concentration,current and tide,suspended sediment concentration(SSC)in mussel aquaculture area and large yellow croaker aquaculture area were extracted and analyzed in detail.The results show the following three points.(1)For the extraction of the mussel aquaculture area,FRI1 and FRI2 are complementary,and the combination of FRI1 and FRI2 is suitable to extract the mussel aquaculture area.As for the large yellow croaker aquaculture area extraction,FRI2 is suitable.(2)Mussel aquaculture and the large yellow croaker aquaculture area in Zhoushan are mainly located on the side near the islands that are away from the eastern open waters.The water environment factor template suitable for mussel and large yellow croaker aquaculture was determined.(3)This two-step remote sensing method can be used for the preliminary screening of potential site selection for the mussels and large yellow croaker aquaculture area in the future.the fishery ranching index(FRI1,FRI2)in this paper can be applied to extract the mussel and large yellow croaker aquaculture areas in coastal waters around the world.展开更多
There has been growing research interest in the use of molybdenum disulfide in the fields of optoelectronics and energy harvesting devices, by virtue of its indirect-to-direct band gap tunability. However, obtaining l...There has been growing research interest in the use of molybdenum disulfide in the fields of optoelectronics and energy harvesting devices, by virtue of its indirect-to-direct band gap tunability. However, obtaining large area thin films of MoS2 for future device applications still remains a challenge. In the present study, the amounts of the precursors （S and MOO3） were varied systematically in order to optimize the growth of highly crystalline and large area MoS2 layers by the chemical vapor deposition method. Careful control of the amounts of precursors was found to the key factor in the synthesis of large area highly crystalline flakes. The thickness of the layers was confirmed by Raman spectroscopy and atomic force microscopy. The optical properties and chemical composition were studied by photoluminescence （PL） and X-ray photoelectron spectroscopy. The emergence of strong direct excitonic emissions at 1.82 eV （A-exciton, with a normalized PL intensity of -55 × 10^3） and 1.98 eV （B-exciton, with a normalized PL intensity of -5 × 10^3） of the sample at room temperature clearly indicates the high luminescence quantum efficiency. The mobility of the films was found to be 0.09 cm^2/（V.s） at room temperature. This study provides a method for the controlled synthesis of high-quality two-dimensional （2D） transition metal dichalcogenide materials, useful for applications in nanodevices, optoelectronics and solar energv conversion.展开更多
Double-walled carbon nanotube （DWCNT） macro-films with large areas, excellent flexibility and superhydrophobicity are reported. The area of the macro-film is larger than 30 cm×15 cm, and this large film can be ...Double-walled carbon nanotube （DWCNT） macro-films with large areas, excellent flexibility and superhydrophobicity are reported. The area of the macro-film is larger than 30 cm×15 cm, and this large film can be bended, or folded without any damage, and even can be tailored freely. After a simple modification of perfluoroalkysilane, the surface of the macro-film shows excellent superhydrophobicity with a water contact angle of 165.74-2 deg. and sliding angle lower than 3 deg., the prepared superhydrophobic films showing excellent antifouling, self-cleaning and water-repellent functions. The topographic roughness and perfluoroalkysilane modification are found to contribute to the observed superhydrophobicity. Considering the outstanding electronic, chemical and mechanical properties of DWCNTs, it is expected that this multifunctional DWCNT macro-film has potential applications in many fields.展开更多
The recent dramatic rise in power conversion efficiencies（PCE）of perovskite solar cells has triggered intense research worldwide.However,their practical development is hampered by poor stability and low PCE values w...The recent dramatic rise in power conversion efficiencies（PCE）of perovskite solar cells has triggered intense research worldwide.However,their practical development is hampered by poor stability and low PCE values with large areas devices.Here,we developed a gas-pumping method to avoid pinholes and eliminate local structural defects over large areas of perovskite film,even for 5 × 5 cm^2 modules,the PCE reached 10.6%and no significant degradation was found after 140 days of outdoor testing.Our approach enables the realization of high performance large-area PSCs for practical application.展开更多
The authors prepared large area surface-enhanced Raman scattering（SERS） active substrates with tunable enhancement. First the large area gratings were fabricated by scanning a photoresist with two-beam laser interfe...The authors prepared large area surface-enhanced Raman scattering（SERS） active substrates with tunable enhancement. First the large area gratings were fabricated by scanning a photoresist with two-beam laser interference and subsequently they were coated with silver nano islands via vacuum evaporation. SERS active metal island grating substrates with four different periods（300, 400, 515 and 600 nm） and Ag nano islands uniformly coated on an area of 2.5 cm×0.5 cm were obtained. The measured SERS spectra reveal the tuning effect of the period on the Raman sig- nals period. The highest enhancement（ca. 105） for Rhodamine 6G（R6G） as probing molecule is associated with a pe- riod of 515 nm due to the perfect matching of surface plasmons and Raman excitation line. A good reproducibility of SERS signals with almost the same SERS intensity at different spots was observed on all the larger area Ag island grating substrates.展开更多
Perovskite solar cells(PSCs)have attracted significant research interest due to the rapid rise in efficiency.However,a large efficiency gap still exists between laboratory-based small devices and industrialoriented la...Perovskite solar cells(PSCs)have attracted significant research interest due to the rapid rise in efficiency.However,a large efficiency gap still exists between laboratory-based small devices and industrialoriented large-scale modules.One of the main reasons for the efficiency losses is the degraded quality and morphology of the deposited large-area films,which is closely associated with crystallization processes.In this review,we discuss the nucleation and crystallization processes in solution and vaporbased up-scaling deposition methods for large-area perovskite films.We review recent scientific achievements and technical developments that have been made in the field of large-area cells.We present the existing problems that limit the performance of large devices and extensively discuss the key influencing parameters from the perspective of nucleation and crystallization over large areas.This review highlights the importance of crystallization control in up-scaling fabrications and presents promising strategies towards large-area perovskite-based optoelectronic devices.展开更多
By tilting a plasma jet and rotating 360°,a large-area can be scanned and sterilized in a short time.Compared with the previous array device,this pipe has the significant advantages of high sterilization uniformi...By tilting a plasma jet and rotating 360°,a large-area can be scanned and sterilized in a short time.Compared with the previous array device,this pipe has the significant advantages of high sterilization uniformity and low gas consumption.Firstly,a rotatable plasma jet device,which can control the swing and rotation of a jet pipe,is designed,and a corresponding theoretical model is established to guide the experiment.Secondly,with Staphylococcus aureus(S.aureus)and Escherichia coli(E.coli)as the target bacteria,the device achieves a short sterilization time of 158 s—the minimum sterilization flow of S.aureus and E.coli is 0.8 slm and 0.6 slm,respectively.The device is compared with an array plasma sterilization device in terms of sterilization speed and gas consumption.The results show that the device is not only better than an array plasma sterilization device with respect to scanning uniformity,but also far less than the array plasma sterilization device in gas consumption of 5 slm.Therefore,the device has great potential in applications involving efficient,large-area sterilization.展开更多
From the point of spatio-temporal changes of ecological system type,function and value,in Menglian county,land using/cover data was based on three Landsat TM images(respectively obtained in2000,2005,2010 and 2015) whi...From the point of spatio-temporal changes of ecological system type,function and value,in Menglian county,land using/cover data was based on three Landsat TM images(respectively obtained in2000,2005,2010 and 2015) which were interpreted as basic information sources by using RS and GIS technology and then revising ecosystem service value per unit area in Menglian county.This paper has researched on the changes of ecosystem service value of economic garden for large area planting as well as evaluated ecosystem service value scientifically in Menglian county combined with the sensitivity analysis.The Results showed that:(1) In Menglian county,from 2000 to 2015,land use pattern manifested as the transformation from large areas of cultivated land,forest land and shrub to the economic landscape,the economic landscape is increased by 24458.31 hm^2,however,farm land,wood land and shrub are reduced by 24865.74 hm2 in total;(2) Changes of ecosystem service value is closely related to economic landscape development in Menglian county.The situation of ecosystem service value shows the changing trend from improvement to severity in 2000-2015.ESV is increased by 96.39 million yuan from 2000 to2005,whose annual growth rate is about 0.56%·a^(-1).But in the year of 2005 to 2015,ESV is reduced by120.23 million yuan and annual reduced rate is about 0.34%·a^(-1);(3) In Menglian county,the main ecological system is the woodland ecological system,the primary ecosystem service functions are biodiversity protection,gas regulation,soil formation and retention,climate regulation and water supply,the ecological benefit were decreased in 2000-2015;(4) From the aspect of space distribution,ecosystem service value in Menglian county is relatively high in the central area and relatively not high in the western and eastern area.ESV(yuan·hm`(-2)) was changed obvious,Gongxin town trended to decline,other towns increased first the then reduced.The temporal and spatial variation of ecosystem service value in Menglian county is affected by natural and human factors.The key to the development of economic landscape is rational land use according to the practical situation,which can create economic value and also keep its ecological value.展开更多
Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical...Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical in astronomical research of wide field of view and large samples that concerns various frontiers in astronomy and astrophysics. Up to now, however, among the tens of billions of all kinds of celestial bodies recorded by imaging surveys, only a very little part (about one ten thousandth)展开更多
About 150000 km^(2) of area is available for exploration in the continental shelf of northern South China Sea.As a potential area,Yingqiong Basin(Yinggehai and Qiongdongnan)has effective exploration area of 90000 km^(2).
The Soft X-ray Imager(SXI)is part of the scientific payload of the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission.SMILE is a joint science mission between the European Space Agency(ESA)and the Chinese...The Soft X-ray Imager(SXI)is part of the scientific payload of the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission.SMILE is a joint science mission between the European Space Agency(ESA)and the Chinese Academy of Sciences(CAS)and is due for launch in 2025.SXI is a compact X-ray telescope with a wide field-of-view(FOV)capable of encompassing large portions of Earth’s magnetosphere from the vantage point of the SMILE orbit.SXI is sensitive to the soft X-rays produced by the Solar Wind Charge eXchange(SWCX)process produced when heavy ions of solar wind origin interact with neutral particles in Earth’s exosphere.SWCX provides a mechanism for boundary detection within the magnetosphere,such as the position of Earth’s magnetopause,because the solar wind heavy ions have a very low density in regions of closed magnetic field lines.The sensitivity of the SXI is such that it can potentially track movements of the magnetopause on timescales of a few minutes and the orbit of SMILE will enable such movements to be tracked for segments lasting many hours.SXI is led by the University of Leicester in the United Kingdom(UK)with collaborating organisations on hardware,software and science support within the UK,Europe,China and the United States.展开更多
All-polymer solar cells(all-PSCs)have made significant progress recently,but few studies have been conducted to investigate the lab-to-manufacturing translation from the spin-coating method to the printing process.Her...All-polymer solar cells(all-PSCs)have made significant progress recently,but few studies have been conducted to investigate the lab-to-manufacturing translation from the spin-coating method to the printing process.Here,the random copolymerization method and non-conjugated backbone approach are integrated to manipulate the morphology and photoelectric properties of the active layer for large-area printed all-PSCs.A series of non-conjugated terpolymer acceptors PYSe-TC_(6)T(x)(x=5,10,and 20,refers to the molar ratio of TC_(6)T unit)are developed by covalently introducing non-conjugated unit TC_(6)T into the PYSe host bipolymer by random copolymerization.The spin-coated PYSe-TC_(6)T(10)-based all-PSC demonstrates the best power conversion efficiency(PCE)of 13.54%,superior to the PYSe-based one(12.45%).More intriguingly,morphological studies reveal that a combination of the random polymerization and non-conjugated backbone strategy can effectively prevent the active layer from overaggregation and improve the film quality during the printing process,thereby minimizing the efficiency and technology gap between spin-coated small-area devices and blade-coated large-area devices.By directly using the same preparation condition of spin-coating,the blade-coated small-area(0.04 cm^(2))delivers a PCE of 12.83%and the large-area(1.21 cm^(2))device achieves a PCE of 11.96%with a small PCE loss.Both PCE value and PCE loss are one of the most outstanding performances of the bladecoated all-PSCs.These findings reveal that a combination of the non-conjugated flexible backbone with random copolymerization to develop non-conjugated terpolymers is an attractive design concept to smoothly realize the lab-to-manufacturing translation.展开更多
基金supported by the National Research Foundation of Korea(NRF)under the Ministry of ScienceICT&Future Planning(Basic Science Research Program[No.2021R1A5A6002853],[No.2022R1A2C3004964],[No.2022R1C1C2008126],[No.2022M3H4A1A03074093])
文摘In designing efficient perovskite solar cells(PSCs),the selection of suitable electron transport layers(ETLs)is critical to the final device performance as they determine the driving force for selective charge extraction.SnO_(2)nanoparticles(NPs)based ETLs have been a popular choice for PSCs due to superior electron mobility,but their relatively deep-lying conduction band energy levels(ECB)result in substantial potential loss.Meanwhile,TiO_(2)NPs establish favorable band alignment owing to shallower ECB,but their low intrinsic mobility and abundant surface trap sites impede the final performance.For this reason,constructing a cascaded bilayer ETL is highly desirable for efficient PSCs,as it can rearrange energy levels and exploit on advantages of an individual ETL.In this study,we prepare SnO_(2)NPs and acetylacetone-modified TiO_(2)(Acac-TiO_(2))NPs and implement them as bilayer SnO_(2)/Acac-TiO_(2)(BST)ETL,to assemble cascaded energy band structure.SnO_(2)contributes to rapid charge carrier transport from high electron mobility while Acac-TiO_(2)minimizes band-offset and effectively suppresses interfacial recombination.Accordingly,the optimized BST ETL generates synergistic influence and delivers power conversion efficiency(PCE)as high as 23.14%with open-circuit voltage(V_(oc))reaching 1.14 V.Furthermore,the BST ETL is transferred to a large scale and the corresponding mini module demonstrates peak performance of 18.39%PCE from 25 cm^(2)aperture area.Finally,the BST-based mini module exhibit excellent stability,maintaining 83.1%of its initial efficiency after 1000 h under simultaneous 1 Sun light-soaking and damp heat(85℃/RH 85%)environment.
文摘AIM: To evaluate the outcomes of trabeculectomy with large area mitomycin-C(MMC) application as a first line treatment in advanced glaucoma. ·METHODS: The records of 55 patients with severe visual field defects undergoing trabeculectomy were retrospectively reviewed. The patients were classified as first-line therapy to either early trabeculectomy(initial trabeculectomy-Group 1) or long term medical therapy followed by trabeculectomy(primary trabeculectomy-Group 2). Trabeculectomy was performed with large-area MMC application. Intraocular pressure(IOP) values,visual acuities,mean deviations,morphology and function of the blebs,necessity for anti-glaucomatous medications and surgical complications were reported. ·RESULTS: There were 20 eyes of 18 patients in Group 1 and 37 eyes of 37 patients in Group 2. The mean preoperative IOPs in Groups 1 and 2 were 40.2±10.0mmHg(27-68mmHg) and 29.0±4.4mmHg(21-41mmHg),respectively(P=0.001). Average preoperative mean deviations(MD) in Groups 1 and 2 were 17.4±2.8dB(13.3-23dB) and 17.9± 2.4dB(13.7-23.2dB),respectively(P=0.441). Postoperative IOPs significantly decreased and were comparable in both Groups. The mean number of medications was significantly higher in Group 2(P =0.005). No cystic bleb formation was observed in Group 1,whereas 4 patients from Group 2(10.8%) developed cystic bleb(P =0.040). No visually devastating complication has occurred in both Groups. ·CONCLUSION: Initial trabeculectomy with large areaMMC application might be applied in patients with advanced glaucoma with low complication rates. Long-term topically applied anti-glaucomatous medications seem to increase the risk of cystic bleb formation.
基金Supported by the Basic Research Program of Nanjing University of Posts and Telecommunications under Grant No NY212002the Innovative Research Team in University under Grant No IRT1148the 2014 Shuangchuang Program of Jiangsu Province
文摘We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer graphene oxide sheets can be chemically reduced by HNO3 and HI to form a highly conductive graphene film on a substrate at lower temperature. The reduced graphene oxide sheets show a high conductivity sheet with resistance of 476Ω/sq and transmittance of 76% at 550nm （6 layers）. The technique used to produce the transparent conductive graphene thin film is facile, inexpensive, and can be tunable for a large area production applied for electronics or touch screens.
文摘Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs can be as low as less than 1.0 mΩ(77 K, 10 GHz).Homogenousity of the properties around the plane was studied.Under the measnous distributions.Influences of substrate temperature and Ar and O2 pressures on properties of the double-sided thin films were discussed.
基金supported by National Natural Science Foundation of China(No.11205201)
文摘By utilization of different excitation power sources, linear plasma sources can be differentiated into DC, RF, VHF, microwave and dual frequency types. Through installing several linear plasma sources in parallel or adopting the so-called roll-to-roll （air-to-air） process, scale uniform linear plasma sources were realized and successfully applied to the deposition of large area uniform dielectric thin films, Furthermore, the magnetic field system can effectively reduce the recombination losses on the wall of the vacuum chamber and enhance the plasma density. Linear plasma sources with approximately one square meter deposition area with the plasma density of 1011 cm 3 have been developed, some of which have been used for the deposition of dielectric layers and large area plasma etching.
基金This work was supported by Office of Naval Research under award N00014-17-1-2619.Certain images in this publication have been obtained by the author(s)from the Wikimedia website,where they were made available under a Creative Commons licence or stated to be in the public domain.Please see individual figure captions in this publication for details.To the extent that the law allows,IOP Publishing disclaim any liability that any person may suffer as a result of accessing,using or forwarding the image(s).Any reuse rights should be checked and permission should be sought if necessary from Wikimedia and/or the copyright owner(as appropriate)before using or forwarding the image.
文摘Halide perovskites have rapidly attracted considerable attention due to unprecedented properties not seen in traditional semiconductors.In addition to their optoelectronic merits,one advantage of perovskite materials is their solution processability,which opens the door to low-cost and high throughput solution coating strategies for the commercialization of perovskite solar cells(PSCs).Here we review perovskite film fabrication by meniscus coating—a simple and readily scalable manufacturing technique,including blade coating and slot-die coating.We outline the fundamental fluid mechanisms of meniscus coating,discuss drying and crystallization of perovskite in the coating process,and provide an overview of recent progress in meniscus-coated PSCs.
文摘Objective To summarize the clinical experience of frontotemporal expanded flap with bilateral superficial temporal vessels in repairing large area scar contracture in face and neck.Methods 14 patients with facial and Cervical scar contracture in our hospital were taken as the research object.With bilateral superficial temporal vessels as pedicles,a 400-600 ml skin dilator was inserted into the forehead and 50-100 ml skin dilator was inserted into the two temporal parts respectively.Within 3-4 months,the water injection volume reaches 2 times of the dilator volume.After maintaining for one month,skin flap transplantation was performed.The frontal flap was reserved for hairline reconstruction,and the flap was cut to cover the area after facial and Cervical scar release to reconstruct the jaw-neck angle.The pedicle division and pedicle trimming were performed 3-4 weeks after operation.Results All the 14 patients completed the operation successfully.The flap expansion time is 5-6 months.The expanded skin flap covers an area of 26 cm×9 cm-42 cm×16 cm,and all the skin flaps survived after operation.Among them,2 patients suffered from flap congestion after flap transplantation.Follow-up for 6-12 months showed that the color and texture of the skin flap were similar to those of facial skin,with natural transition and no obvious bloating.The angle between the lower jaw and the neck is about 90.The anterior flexion,posterior extension,lateral flexion and rotation of the neck are obviously improved compared with the anterior,and the posterior extension is close to normal.Conclusion Frontotemporal expanded flap with bilateral superficial temporal vessels is suitable for patients with large-area scar contracture in face and neck that cannot be repaired after expansion of adjacent local normal tissues.
基金The National Key Research and Development Program of China under contract Nos 2023YFD2401900 and 2020YFD09008004the National Natural Science Foundation of China Key International(Regional)Cooperative Research Project under contract No.42020104009the Basic Public Welfare Research Program of Zhejiang Province under contract No.LGF21D010004.
文摘Mussel aquaculture and large yellow croaker aquaculture areas and their environmental characteristics in Zhoushan were analyzed using satellite data and in-situ surveys.A new two-step remote sensing method was proposed and applied to determine the basic environmental characteristics of the best mussel and large yellow croaker aquaculture areas.This methodology includes the first step of extraction of the location distribution and the second step of the extraction of internal environmental factors.The fishery ranching index(FRI1,FRI2)was established to extract the mussel and the large yellow croaker aquaculture area in Zhoushan,using Gaofen-1(GF-1)and Gaofen-6(GF-6)satellite data with a special resolution of 2 m.In the second step,the environmental factors such as sea surface temperature(SST),chlorophyll a(Chl-a)concentration,current and tide,suspended sediment concentration(SSC)in mussel aquaculture area and large yellow croaker aquaculture area were extracted and analyzed in detail.The results show the following three points.(1)For the extraction of the mussel aquaculture area,FRI1 and FRI2 are complementary,and the combination of FRI1 and FRI2 is suitable to extract the mussel aquaculture area.As for the large yellow croaker aquaculture area extraction,FRI2 is suitable.(2)Mussel aquaculture and the large yellow croaker aquaculture area in Zhoushan are mainly located on the side near the islands that are away from the eastern open waters.The water environment factor template suitable for mussel and large yellow croaker aquaculture was determined.(3)This two-step remote sensing method can be used for the preliminary screening of potential site selection for the mussels and large yellow croaker aquaculture area in the future.the fishery ranching index(FRI1,FRI2)in this paper can be applied to extract the mussel and large yellow croaker aquaculture areas in coastal waters around the world.
文摘There has been growing research interest in the use of molybdenum disulfide in the fields of optoelectronics and energy harvesting devices, by virtue of its indirect-to-direct band gap tunability. However, obtaining large area thin films of MoS2 for future device applications still remains a challenge. In the present study, the amounts of the precursors （S and MOO3） were varied systematically in order to optimize the growth of highly crystalline and large area MoS2 layers by the chemical vapor deposition method. Careful control of the amounts of precursors was found to the key factor in the synthesis of large area highly crystalline flakes. The thickness of the layers was confirmed by Raman spectroscopy and atomic force microscopy. The optical properties and chemical composition were studied by photoluminescence （PL） and X-ray photoelectron spectroscopy. The emergence of strong direct excitonic emissions at 1.82 eV （A-exciton, with a normalized PL intensity of -55 × 10^3） and 1.98 eV （B-exciton, with a normalized PL intensity of -5 × 10^3） of the sample at room temperature clearly indicates the high luminescence quantum efficiency. The mobility of the films was found to be 0.09 cm^2/（V.s） at room temperature. This study provides a method for the controlled synthesis of high-quality two-dimensional （2D） transition metal dichalcogenide materials, useful for applications in nanodevices, optoelectronics and solar energv conversion.
基金supports by the National Natural Science Foundation of China (No. 50871067)the National 863 Project (No. 2007AA05Z128) from the Ministry of Science and Technology of China
文摘Double-walled carbon nanotube （DWCNT） macro-films with large areas, excellent flexibility and superhydrophobicity are reported. The area of the macro-film is larger than 30 cm×15 cm, and this large film can be bended, or folded without any damage, and even can be tailored freely. After a simple modification of perfluoroalkysilane, the surface of the macro-film shows excellent superhydrophobicity with a water contact angle of 165.74-2 deg. and sliding angle lower than 3 deg., the prepared superhydrophobic films showing excellent antifouling, self-cleaning and water-repellent functions. The topographic roughness and perfluoroalkysilane modification are found to contribute to the observed superhydrophobicity. Considering the outstanding electronic, chemical and mechanical properties of DWCNTs, it is expected that this multifunctional DWCNT macro-film has potential applications in many fields.
文摘The recent dramatic rise in power conversion efficiencies（PCE）of perovskite solar cells has triggered intense research worldwide.However,their practical development is hampered by poor stability and low PCE values with large areas devices.Here,we developed a gas-pumping method to avoid pinholes and eliminate local structural defects over large areas of perovskite film,even for 5 × 5 cm^2 modules,the PCE reached 10.6%and no significant degradation was found after 140 days of outdoor testing.Our approach enables the realization of high performance large-area PSCs for practical application.
基金Supported by the National Natural Science Foundation of China（Nos.90923037, 61137001, 61008014, 60978048）.
文摘The authors prepared large area surface-enhanced Raman scattering（SERS） active substrates with tunable enhancement. First the large area gratings were fabricated by scanning a photoresist with two-beam laser interference and subsequently they were coated with silver nano islands via vacuum evaporation. SERS active metal island grating substrates with four different periods（300, 400, 515 and 600 nm） and Ag nano islands uniformly coated on an area of 2.5 cm×0.5 cm were obtained. The measured SERS spectra reveal the tuning effect of the period on the Raman sig- nals period. The highest enhancement（ca. 105） for Rhodamine 6G（R6G） as probing molecule is associated with a pe- riod of 515 nm due to the perfect matching of surface plasmons and Raman excitation line. A good reproducibility of SERS signals with almost the same SERS intensity at different spots was observed on all the larger area Ag island grating substrates.
文摘Perovskite solar cells(PSCs)have attracted significant research interest due to the rapid rise in efficiency.However,a large efficiency gap still exists between laboratory-based small devices and industrialoriented large-scale modules.One of the main reasons for the efficiency losses is the degraded quality and morphology of the deposited large-area films,which is closely associated with crystallization processes.In this review,we discuss the nucleation and crystallization processes in solution and vaporbased up-scaling deposition methods for large-area perovskite films.We review recent scientific achievements and technical developments that have been made in the field of large-area cells.We present the existing problems that limit the performance of large devices and extensively discuss the key influencing parameters from the perspective of nucleation and crystallization over large areas.This review highlights the importance of crystallization control in up-scaling fabrications and presents promising strategies towards large-area perovskite-based optoelectronic devices.
基金partially supported by National Natural Science Foundation of China(Nos.61864001 and 62163009)Key Projects of Guangxi Natural Science Foundation(No.2021JJD170019)+1 种基金the Foundation of Guangxi Key Laboratory of Automatic Detecting Technology and Instruments(Guilin University of Electronic Technology)(Nos.YQ21111 and YQ21204)Innovation Project of Guang Xi Graduate Education(No.YCSW2021181)。
文摘By tilting a plasma jet and rotating 360°,a large-area can be scanned and sterilized in a short time.Compared with the previous array device,this pipe has the significant advantages of high sterilization uniformity and low gas consumption.Firstly,a rotatable plasma jet device,which can control the swing and rotation of a jet pipe,is designed,and a corresponding theoretical model is established to guide the experiment.Secondly,with Staphylococcus aureus(S.aureus)and Escherichia coli(E.coli)as the target bacteria,the device achieves a short sterilization time of 158 s—the minimum sterilization flow of S.aureus and E.coli is 0.8 slm and 0.6 slm,respectively.The device is compared with an array plasma sterilization device in terms of sterilization speed and gas consumption.The results show that the device is not only better than an array plasma sterilization device with respect to scanning uniformity,but also far less than the array plasma sterilization device in gas consumption of 5 slm.Therefore,the device has great potential in applications involving efficient,large-area sterilization.
基金supported by the National Natural Science Foundation of China(Grant Nos.41361020,40961031)
文摘From the point of spatio-temporal changes of ecological system type,function and value,in Menglian county,land using/cover data was based on three Landsat TM images(respectively obtained in2000,2005,2010 and 2015) which were interpreted as basic information sources by using RS and GIS technology and then revising ecosystem service value per unit area in Menglian county.This paper has researched on the changes of ecosystem service value of economic garden for large area planting as well as evaluated ecosystem service value scientifically in Menglian county combined with the sensitivity analysis.The Results showed that:(1) In Menglian county,from 2000 to 2015,land use pattern manifested as the transformation from large areas of cultivated land,forest land and shrub to the economic landscape,the economic landscape is increased by 24458.31 hm^2,however,farm land,wood land and shrub are reduced by 24865.74 hm2 in total;(2) Changes of ecosystem service value is closely related to economic landscape development in Menglian county.The situation of ecosystem service value shows the changing trend from improvement to severity in 2000-2015.ESV is increased by 96.39 million yuan from 2000 to2005,whose annual growth rate is about 0.56%·a^(-1).But in the year of 2005 to 2015,ESV is reduced by120.23 million yuan and annual reduced rate is about 0.34%·a^(-1);(3) In Menglian county,the main ecological system is the woodland ecological system,the primary ecosystem service functions are biodiversity protection,gas regulation,soil formation and retention,climate regulation and water supply,the ecological benefit were decreased in 2000-2015;(4) From the aspect of space distribution,ecosystem service value in Menglian county is relatively high in the central area and relatively not high in the western and eastern area.ESV(yuan·hm`(-2)) was changed obvious,Gongxin town trended to decline,other towns increased first the then reduced.The temporal and spatial variation of ecosystem service value in Menglian county is affected by natural and human factors.The key to the development of economic landscape is rational land use according to the practical situation,which can create economic value and also keep its ecological value.
文摘Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical in astronomical research of wide field of view and large samples that concerns various frontiers in astronomy and astrophysics. Up to now, however, among the tens of billions of all kinds of celestial bodies recorded by imaging surveys, only a very little part (about one ten thousandth)
文摘About 150000 km^(2) of area is available for exploration in the continental shelf of northern South China Sea.As a potential area,Yingqiong Basin(Yinggehai and Qiongdongnan)has effective exploration area of 90000 km^(2).
基金funding and support from the United Kingdom Space Agency(UKSA)the European Space Agency(ESA)+5 种基金funded and supported through the ESA PRODEX schemefunded through PRODEX PEA 4000123238the Research Council of Norway grant 223252funded by Spanish MCIN/AEI/10.13039/501100011033 grant PID2019-107061GB-C61funding and support from the Chinese Academy of Sciences(CAS)funding and support from the National Aeronautics and Space Administration(NASA)。
文摘The Soft X-ray Imager(SXI)is part of the scientific payload of the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission.SMILE is a joint science mission between the European Space Agency(ESA)and the Chinese Academy of Sciences(CAS)and is due for launch in 2025.SXI is a compact X-ray telescope with a wide field-of-view(FOV)capable of encompassing large portions of Earth’s magnetosphere from the vantage point of the SMILE orbit.SXI is sensitive to the soft X-rays produced by the Solar Wind Charge eXchange(SWCX)process produced when heavy ions of solar wind origin interact with neutral particles in Earth’s exosphere.SWCX provides a mechanism for boundary detection within the magnetosphere,such as the position of Earth’s magnetopause,because the solar wind heavy ions have a very low density in regions of closed magnetic field lines.The sensitivity of the SXI is such that it can potentially track movements of the magnetopause on timescales of a few minutes and the orbit of SMILE will enable such movements to be tracked for segments lasting many hours.SXI is led by the University of Leicester in the United Kingdom(UK)with collaborating organisations on hardware,software and science support within the UK,Europe,China and the United States.
基金the support from the National Natural Science Foundation of China(NSFC)(51973087,52173170 and 22169012)Thousand Talents Plan of Jiangxi Province(jxsq2019201004)。
文摘All-polymer solar cells(all-PSCs)have made significant progress recently,but few studies have been conducted to investigate the lab-to-manufacturing translation from the spin-coating method to the printing process.Here,the random copolymerization method and non-conjugated backbone approach are integrated to manipulate the morphology and photoelectric properties of the active layer for large-area printed all-PSCs.A series of non-conjugated terpolymer acceptors PYSe-TC_(6)T(x)(x=5,10,and 20,refers to the molar ratio of TC_(6)T unit)are developed by covalently introducing non-conjugated unit TC_(6)T into the PYSe host bipolymer by random copolymerization.The spin-coated PYSe-TC_(6)T(10)-based all-PSC demonstrates the best power conversion efficiency(PCE)of 13.54%,superior to the PYSe-based one(12.45%).More intriguingly,morphological studies reveal that a combination of the random polymerization and non-conjugated backbone strategy can effectively prevent the active layer from overaggregation and improve the film quality during the printing process,thereby minimizing the efficiency and technology gap between spin-coated small-area devices and blade-coated large-area devices.By directly using the same preparation condition of spin-coating,the blade-coated small-area(0.04 cm^(2))delivers a PCE of 12.83%and the large-area(1.21 cm^(2))device achieves a PCE of 11.96%with a small PCE loss.Both PCE value and PCE loss are one of the most outstanding performances of the bladecoated all-PSCs.These findings reveal that a combination of the non-conjugated flexible backbone with random copolymerization to develop non-conjugated terpolymers is an attractive design concept to smoothly realize the lab-to-manufacturing translation.
