Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue ...Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue damage occurs frequently to affect the screening performance. This work aims to conduct a systematic mechanics analysis of the beam structures and improve the design method. Total motion of a beam structure in screening process can be decomposed into the traditional followed rigid translation(FRT), bending vibration(BV) and axial linear-distributed random rigid translation(ALRRT) excited by the side-plates. When treated as a generalized single-degree-of-freedom(SDOF) elastic system analytically, the BV can be solved by the Rayleigh's method. Stochastic analysis for random process is conducted for the detailed ALRRT calculation. Expressions for the mechanics property, namely, the shearing force and bending-moment with respect to BV and ALRRT, are derived, respectively. Experimental and numerical investigations demonstrate that the largest BV exists at the beam center and can be nearly ignored in comparison with the FRT during a simplified engineering design. With the BV and FRT considered, the mechanics property accords well with the practical situation with the maximum error of 6.33%, which is less than that obtained by traditional method.展开更多
In this paper, a solution of axisymmetric large amplitude vibration is presented for a circular sandwich plate with the flexure rigidity of the face layers taken into account . In solving the problem , the modified i...In this paper, a solution of axisymmetric large amplitude vibration is presented for a circular sandwich plate with the flexure rigidity of the face layers taken into account . In solving the problem , the modified iteration method is proposed. Then our results are compared with those from paper [1].展开更多
In this paper, nonlinear forced vibration of symmetrically laminated rectilinearly orthotropic circular plates excited by a harmonic force q(0)cos omega t including effects of transverse shear deformation is discussed...In this paper, nonlinear forced vibration of symmetrically laminated rectilinearly orthotropic circular plates excited by a harmonic force q(0)cos omega t including effects of transverse shear deformation is discussed. The analytical solution for the relationship between forcing frequency and amplitude of vibration is obtained by Galerkin's method. Finally, the paper analyses the effect of the transverse shear on the vibration of the plate and gives the ratio of nonlinear period to linear period for nonlinear free vibration of the plate.展开更多
Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the st...Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.展开更多
A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has ...A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has robustness to uncertainty of frequency, which makes it practical in engineering. Several time optimal and time-fuel optimal control strategies are designed for a kind of single flexible link. Simulation results validate the feasibility of our method.展开更多
This paper describes analytical and numerical methods to analyze the steady state periodic response of an oscillator with symmetric elastic and inertia nonlinearity. A new implementation of the homotopy perturbation m...This paper describes analytical and numerical methods to analyze the steady state periodic response of an oscillator with symmetric elastic and inertia nonlinearity. A new implementation of the homotopy perturbation method （HPM） and an ancient Chinese method called the max-rain approach are presented to obtain an approximate solution. The major concern is to assess the accuracy of these approximate methods in predicting the system response within a certain range of system parameters by examining their ability to establish an actual （numerical） solution. Therefore, the analytical results are compared with the numerical results to illustrate the effectiveness and convenience of the proposed methods.展开更多
This paper addresses the effect of leakage on the natural frequencies of a large amplitude vibrating panel backed by a cavity, which has not been considered in many other related studies. The structural-acoustic gover...This paper addresses the effect of leakage on the natural frequencies of a large amplitude vibrating panel backed by a cavity, which has not been considered in many other related studies. The structural-acoustic governing equations are employed to study this nonlinear problem. An elliptical integral method, which was recently developed for the nonlinear panel cavity problem, is introduced here to solve for the structural-acoustics responses. The present results agree reasonably well with those obtained from the classical harmonic balance method. Modal convergences of the nonlinear solutions are performed to verify the proposed method. The effects of vibration amplitude and leakage size are studied and discussed. It is found that （1） the edge leakages in a panel cavity system significantly affect the natural frequency properties, and （2） the edge leakages induce a low frequency acoustic resonance.展开更多
基金Project(51221462) supported by the National Natural Science Foundation of ChinaProject(20120095110001) supported by the Ph D Programs Foundation of Ministry of Education of China
文摘Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue damage occurs frequently to affect the screening performance. This work aims to conduct a systematic mechanics analysis of the beam structures and improve the design method. Total motion of a beam structure in screening process can be decomposed into the traditional followed rigid translation(FRT), bending vibration(BV) and axial linear-distributed random rigid translation(ALRRT) excited by the side-plates. When treated as a generalized single-degree-of-freedom(SDOF) elastic system analytically, the BV can be solved by the Rayleigh's method. Stochastic analysis for random process is conducted for the detailed ALRRT calculation. Expressions for the mechanics property, namely, the shearing force and bending-moment with respect to BV and ALRRT, are derived, respectively. Experimental and numerical investigations demonstrate that the largest BV exists at the beam center and can be nearly ignored in comparison with the FRT during a simplified engineering design. With the BV and FRT considered, the mechanics property accords well with the practical situation with the maximum error of 6.33%, which is less than that obtained by traditional method.
文摘In this paper, a solution of axisymmetric large amplitude vibration is presented for a circular sandwich plate with the flexure rigidity of the face layers taken into account . In solving the problem , the modified iteration method is proposed. Then our results are compared with those from paper [1].
文摘In this paper, nonlinear forced vibration of symmetrically laminated rectilinearly orthotropic circular plates excited by a harmonic force q(0)cos omega t including effects of transverse shear deformation is discussed. The analytical solution for the relationship between forcing frequency and amplitude of vibration is obtained by Galerkin's method. Finally, the paper analyses the effect of the transverse shear on the vibration of the plate and gives the ratio of nonlinear period to linear period for nonlinear free vibration of the plate.
基金Project(20120095110001)supported by the PhD Programs Foundation of Ministry of Education of ChinaProject(51134022,51221462)supported by the National Natural Science Foundation of China+1 种基金Project(CXZZ13_0927)supported by Research and Innovation Program for College Graduates of Jiangsu Province,ChinaProject(2013DXS03)supported by the Fundamental Research Funds for Central Universities of China
文摘Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.
基金This project is supported by National 211 Project.
文摘A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has robustness to uncertainty of frequency, which makes it practical in engineering. Several time optimal and time-fuel optimal control strategies are designed for a kind of single flexible link. Simulation results validate the feasibility of our method.
文摘This paper describes analytical and numerical methods to analyze the steady state periodic response of an oscillator with symmetric elastic and inertia nonlinearity. A new implementation of the homotopy perturbation method （HPM） and an ancient Chinese method called the max-rain approach are presented to obtain an approximate solution. The major concern is to assess the accuracy of these approximate methods in predicting the system response within a certain range of system parameters by examining their ability to establish an actual （numerical） solution. Therefore, the analytical results are compared with the numerical results to illustrate the effectiveness and convenience of the proposed methods.
基金Project supported by the City USRG Grant(No.7004701),China
文摘This paper addresses the effect of leakage on the natural frequencies of a large amplitude vibrating panel backed by a cavity, which has not been considered in many other related studies. The structural-acoustic governing equations are employed to study this nonlinear problem. An elliptical integral method, which was recently developed for the nonlinear panel cavity problem, is introduced here to solve for the structural-acoustics responses. The present results agree reasonably well with those obtained from the classical harmonic balance method. Modal convergences of the nonlinear solutions are performed to verify the proposed method. The effects of vibration amplitude and leakage size are studied and discussed. It is found that （1） the edge leakages in a panel cavity system significantly affect the natural frequency properties, and （2） the edge leakages induce a low frequency acoustic resonance.
