A compact laser diode-pumped solid-state Nd：LuVO4 acousto-optic Q-switched laser is demonstrated at 916 nm of a quasi-three level for the first time. A pulse width of 130ns is observed when the pulse-repetition frequ...A compact laser diode-pumped solid-state Nd：LuVO4 acousto-optic Q-switched laser is demonstrated at 916 nm of a quasi-three level for the first time. A pulse width of 130ns is observed when the pulse-repetition frequency is 10 kHz. The laser experiment shows that the Nd：Lu VO4 crystal can be used for efficient diode-pumped Q-switched lasers.展开更多
We demonstrate a Kerr-lens mode-locked Yb:Lu YSiO_(5)(Yb:LYSO)laser with the pulse duration of 54 fs,corresponding to a spectral bandwidth of 25 nm centered at 1062 nm.To the best of our knowledge,this is the shortest...We demonstrate a Kerr-lens mode-locked Yb:Lu YSiO_(5)(Yb:LYSO)laser with the pulse duration of 54 fs,corresponding to a spectral bandwidth of 25 nm centered at 1062 nm.To the best of our knowledge,this is the shortest pulse duration obtained from Yb:LYSO laser.At the repetition rate of 378.3 MHz,an output power of 111.6 m W is obtained using an output coupler with 0.6%transmittance,which can maintain long-time stable mode-locking more than 13 h.展开更多
Numerical simulation is described which estimates the performance of thulium sensitized holmium doped CW fluoride fiber laser at 2.04 μm for both core and cladding pumped. This model takes into account the mechanis...Numerical simulation is described which estimates the performance of thulium sensitized holmium doped CW fluoride fiber laser at 2.04 μm for both core and cladding pumped. This model takes into account the mechanisms of cross relaxation and energy transfer to describe the laser operation. A subroutine program for calculating the absorption rate of cladding pumped scheme is included in the model. The losses of signal and pump light along the fiber have been taken into account. The test of cladding pumped scheme program shows good agreement with the experimental result. The experimental results of core pumping Tm Ho doped fiber laser in fluoride host are compared with the present model, and shows a good agreement with calculations. This model also provides data of the optimum parameters for the configuration of the efficient cladding pumped Tm Ho fluoride laser systems.展开更多
A laser-diode-pumped Nd: YAG laser Q-switched Passively with a YAG colorcenter chip has been deveolped. The Q-switched pulse output has a duration of 25-70ns,an energy of about 7.9 μJ and a repetition frequency of 1....A laser-diode-pumped Nd: YAG laser Q-switched Passively with a YAG colorcenter chip has been deveolped. The Q-switched pulse output has a duration of 25-70ns,an energy of about 7.9 μJ and a repetition frequency of 1.25-5.0kHz when the laser cavityparameters and pump power are changed. The Q-switched dynamics is analyzed with therate equation theorry. The theoretical and experimental results agree well.展开更多
We demonstrate a cw and actively Q-switched Er：LuAO laser resonantly dual-end-pumped by 1532nm fibre- coupled laser diodes. A maximum cw output power of 1.9W at 1650.3nm is obtained at a pump power of 25.5 W, corresp...We demonstrate a cw and actively Q-switched Er：LuAO laser resonantly dual-end-pumped by 1532nm fibre- coupled laser diodes. A maximum cw output power of 1.9W at 1650.3nm is obtained at a pump power of 25.5 W, corresponding to a slope efficiency of 43.3 %. In the Q-switched regime, the maximum pulse energy of 3.51 mJ is reached at a pulse repetition rate of 100 Hz, a pulse duration of 90.5ns and a pump power of 25.5 W. At the repetition rate of 400 Hz, the output energy is 2.12m J, corresponding to a pulse duration of 125.4 ns.展开更多
We demonstrate a diode-pumped passively cw mode-locked Nd：CaGdAlO4 laser operating at 1079nm with a semiconductor saturable absorber mirror for the first time to the best of our knowledge. The threshold pump power of...We demonstrate a diode-pumped passively cw mode-locked Nd：CaGdAlO4 laser operating at 1079nm with a semiconductor saturable absorber mirror for the first time to the best of our knowledge. The threshold pump power of the laser is 180mW. A maximum average output power of 93mW is obtained under the pump power of 1.94 W. The pulse duration of the mode-locked pulses is 3.1ps and the repetition rate is 157MHz.展开更多
A compact high power diode-pumped passively mode-locked Nd:YVO_4 laser with high repetition rate is realized.Using an Nd:YVO_4 crystal and a semiconductor saturable absorber mirror(SESAM) in the oscillator, the picose...A compact high power diode-pumped passively mode-locked Nd:YVO_4 laser with high repetition rate is realized.Using an Nd:YVO_4 crystal and a semiconductor saturable absorber mirror(SESAM) in the oscillator, the picosecond pulse output with an average power of 1.38 W, a repetition rate of 3.24 GHz, and a pulse duration of 11.4 ps is achieved. After one stage of amplification, the final output power reaches 11.34 W, corresponding to a total optical-to-optical efficiency of about 32%. The root mean square(RMS) value of power fluctuation is demonstrated to be less than 0.6% in 24 hours,showing a superior stability with the compact configuration.展开更多
A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam qualit...A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam quality at high power, thermally near-unstable flat-flat resonators with two-rod birefringence compensation are designed to obtain the large fundamental mode size inside the Nd：YAG rods and the same beam width inside the KTP crystal. The optimal intracavity power ratio of both 1064nm and 1319nm beams is also considered. The output power fluctuation of the yellow laser remains less than 5% in four hours.展开更多
Here we developed a novel wavelength-switchable visible continuous-wave(CW)Pr^(3+):YLF laser around 670 nm.In single-wavelength laser operations,the maximum output powers of 2.60 W,1.26 W,and 0.21 W,the maximum slope ...Here we developed a novel wavelength-switchable visible continuous-wave(CW)Pr^(3+):YLF laser around 670 nm.In single-wavelength laser operations,the maximum output powers of 2.60 W,1.26 W,and 0.21 W,the maximum slope efficiencies of 34.7%,27.3%,and 12.3%were achieved with good beam qualities(M^(2)<1.6)at 670.4 nm,674.2 nm,and 678.9 nm,respectively.Record-high output power(2.6 W)and record-high slope efficiency(34.7%)were achieved for the Pr^(3+):YLF laser operation at 670.4 nm.This is also the first demonstration of longer-wavelength peaks beyond 670 nm in the^(3)P_(1)→^(3)F_(3)transition of Pr^(3+):YLF.In multi-wavelength laser operations,the dual-wavelength lasings,including 670.1/674.8 nm,670.1/679.1 nm,and 675.0/679.4 nm,were obtained by fine adjustment of one/two etalons within the cavity.Furthermore,the triple-wavelength lasings,e.g.672.2/674.2/678.6 nm and 670.4/674.8/679.4 nm,were successfully demonstrated.Moreover,both the first-order vortex lasers(LG_(0)^(+1)and LG_(0)^(-1)modes)at 670.4 nm were obtained by off-axis pumping.展开更多
We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite cera...We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.展开更多
We report the compact diode-pumped continuous-wave （CW） Nd：LuV04 lasers operated at 916nm and 458nm for the first time. The maximum output power of 780mW at 916nm laser is obtained with a slope efficiency of 9.3%. ...We report the compact diode-pumped continuous-wave （CW） Nd：LuV04 lasers operated at 916nm and 458nm for the first time. The maximum output power of 780mW at 916nm laser is obtained with a slope efficiency of 9.3%. We generate 50roW of 458nm blue laser employing a type-Ⅰ critical phase-matched LBO crystal.展开更多
The use of broadband laser technology is a novel approach for inhibiting processes related to laser plasma interactions(LPIs).In this study,several preliminary experiments into broadband-laser-driven LPIs are carried ...The use of broadband laser technology is a novel approach for inhibiting processes related to laser plasma interactions(LPIs).In this study,several preliminary experiments into broadband-laser-driven LPIs are carried out using a newly established hundreds-of-joules broadband second-harmonic-generation laser facility.Through direct comparison with LPI results for a traditional narrowband laser,the actual LPI-suppression effect of the broadband laser is shown.The broadband laser had a clear suppressive effect on both back-stimulated Raman scattering and back-stimulated Brillouin scattering at laser intensities below 1×10^(15) W cm^(−2).An abnormal hot-electron phenomenon is also investigated,using targets of different thicknesses.展开更多
This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd：YAG master oscillator-power amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation fiat...This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd：YAG master oscillator-power amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation fiat-fiat cavity was adopted as the master oscillator. A solid etalon was inserted in the unidirectional ring resonator to compress the laser linewidth. Under a repetition rate of 500 Hz and pulse width of 160 μs, the master oscillator delivers an average output power of 16.8 W at 1319 nm with linear polarisation, beam quality factor M^2=1.16 and linewidth of 3.2 GHz. A double-pass power amplifier with two amplifier stages was employed for higher power scaling and the output power was amplified to be 25.9 W with M^2 = 1.43.展开更多
The effect of co-doping Y3＋ and the doping concentration of Nd3＋ on the spectroscopic properties and laser performance of Nd：CaF2 crystals are investigated systematically. For a 0.5% Nd：CaF2 crystal, the emission ...The effect of co-doping Y3＋ and the doping concentration of Nd3＋ on the spectroscopic properties and laser performance of Nd：CaF2 crystals are investigated systematically. For a 0.5% Nd：CaF2 crystal, the emission life- time at 1.06 μm increases from 18 to 361 μs by co-doping 10 at.% Y3＋, while the emission cross section increases to 4.27 × 10^-20 cm2 at 1054 nm. With a 10 at.% doping concentration of Y3＋, Nd, Y：CaF2 crystals concentrate emission bands that peak at 1054 nm with shoulders at 1063 nm, and FWHM at about 30 nm. A diode-pumped, highly efficient laser operation is obtained with 0.5% Nd, 1070 Y：CaF2 and 0.6% Nd, 1070 Y：CaF2 crystals, with slope efficiencies over 30% and 27%, respectively, and a maximum output power up to 901 mW.展开更多
The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant ...The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.展开更多
Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a...Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a processebased physical modeling of a pileereinforced reservoir landslide and present an improved deformation analysis involving large strains and water effects.We collect multieperiod point clouds using a terrain laser scanner and reconstruct its deformation field through a point cloud processing workflow.The results show that this method can accurately describe the landslide surface deformation at any time and area by both scalar and vector fields.The deformation fields in different profiles of the physical model and different stages of the evolutionary process provide adequate and detailed landslide information.We analyze the large strain upstream of the pile caused by the pile installation and the consequent violent deformation during the evolutionary process.Furthermore,our method effectively overcomes the challenges of identifying targets commonly encountered in geotechnical modeling where water effects are considered and targets are polluted,which facilitates the deformation analysis at the wading area in a reservoir landslide.Eventually,combining subsurface deformation as well as numerical modeling,we comprehensively analyze the kinematics and failure mechanisms of this complicated object involving landslides and pile foundations as well as water effects.This method is of great significance for any geotechnical modeling concerning large-strain analysis and water effects.展开更多
Laser powder bed fusion(L-PBF)of Mg alloys has provided tremendous opportunities for customized production of aeronautical and medical parts.Layer thickness(LT)is of great significance to the L-PBF process but has not...Laser powder bed fusion(L-PBF)of Mg alloys has provided tremendous opportunities for customized production of aeronautical and medical parts.Layer thickness(LT)is of great significance to the L-PBF process but has not been studied for Mg alloys.In this study,WE43 Mg alloy bulk cubes,porous scaffolds,and thin walls with layer thicknesses of 10,20,30,and 40μm were fabricated.The required laser energy input increased with increasing layer thickness and was different for the bulk cubes and porous scaffolds.Porosity tended to occur at the connection joints in porous scaffolds for LT40 and could be eliminated by reducing the laser energy input.For thin wall parts,a large overhang angle or a small wall thickness resulted in porosity when a large layer thicknesses was used,and the porosity disappeared by reducing the layer thickness or laser energy input.A deeper keyhole penetration was found in all occasions with porosity,explaining the influence of layer thickness,geometrical structure,and laser energy input on the porosity.All the samples achieved a high fusion quality with a relative density of over 99.5%using the optimized laser energy input.The increased layer thickness resulted to more precipitation phases,finer grain sizes and decreased grain texture.With the similar high fusion quality,the tensile strength and elongation of bulk samples were significantly improved from 257 MPa and 1.41%with the 10μm layer to 287 MPa and 15.12%with the 40μm layer,in accordance with the microstructural change.The effect of layer thickness on the compressive properties of porous scaffolds was limited.However,the corrosion rate of bulk samples accelerated with increasing the layer thickness,mainly attributed to the increased number of precipitation phases.展开更多
BACKGROUND In recent years,confocal laser endomicroscopy(CLE)has become a new endoscopic imaging technology at the microscopic level,which is extensively performed for real-time in vivo histological examination.CLE ca...BACKGROUND In recent years,confocal laser endomicroscopy(CLE)has become a new endoscopic imaging technology at the microscopic level,which is extensively performed for real-time in vivo histological examination.CLE can be performed to distinguish benign from malignant lesions.In this study,we diagnosed using CLE an asymptomatic patient with poorly differentiated gastric adenocarcinoma.CASE SUMMARY A 63-year-old woman was diagnosed with gastric mucosal lesions,which may be gastric cancer,in the small curvature of the stomach by gastroscopy.She consented to undergo CLE for morphological observation of the gastric mucosa.Through the combination of CLE diagnosis and postoperative pathology,the intraoperative CLE diagnosis was considered to be reliable.According to our experience,CLE can be performed as the first choice for the diagnosis of gastric cancer.CONCLUSION CLE has several advantages over pathological diagnosis.We believe that CLE has great potential in the diagnosis of benign and malignant gastric lesions.展开更多
A kilowatt diode-pumped solid state heat capacity laser is fabricated with a double-slab Nd：YAG. Using the theoretical model of heat capacity laser output laser characteristics, the relationships between the output p...A kilowatt diode-pumped solid state heat capacity laser is fabricated with a double-slab Nd：YAG. Using the theoretical model of heat capacity laser output laser characteristics, the relationships between the output power, temperature and time are obtained. The slab is 59 × 40×4.5mm^3 in size. The average pump power is 11.2kW, the repetition rate is i kHz, and the duty cycle is 20%. During the running time of i s, the output energy of the laser has a fluctuation with the maximal output energy at 2.06 J, and the maximal output average power is 2.06kW. At the end of the second, the output energy declines to about 50% compared to the beginning. The therma/effects can be improved with one slab cooled by water. The experimental results are consistent with the calculation data.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 60490280, 60225005 and 60478046.
文摘A compact laser diode-pumped solid-state Nd：LuVO4 acousto-optic Q-switched laser is demonstrated at 916 nm of a quasi-three level for the first time. A pulse width of 130ns is observed when the pulse-repetition frequency is 10 kHz. The laser experiment shows that the Nd：Lu VO4 crystal can be used for efficient diode-pumped Q-switched lasers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11774277 and 62105253)the Science and Technology Program of Xi’an(Grant No.202005YK01)+2 种基金the Natural Science Basic Research Program of Shaanxi,China(Grant No.2019JCW-03)the Natural Science Foundation of Shannxi Province,China(Grant Nos.2022JQ-709 and 2023-JC-YB-485)the Fundamental Research Funds for the Central Universities(Grant No.XJS222206)。
文摘We demonstrate a Kerr-lens mode-locked Yb:Lu YSiO_(5)(Yb:LYSO)laser with the pulse duration of 54 fs,corresponding to a spectral bandwidth of 25 nm centered at 1062 nm.To the best of our knowledge,this is the shortest pulse duration obtained from Yb:LYSO laser.At the repetition rate of 378.3 MHz,an output power of 111.6 m W is obtained using an output coupler with 0.6%transmittance,which can maintain long-time stable mode-locking more than 13 h.
文摘Numerical simulation is described which estimates the performance of thulium sensitized holmium doped CW fluoride fiber laser at 2.04 μm for both core and cladding pumped. This model takes into account the mechanisms of cross relaxation and energy transfer to describe the laser operation. A subroutine program for calculating the absorption rate of cladding pumped scheme is included in the model. The losses of signal and pump light along the fiber have been taken into account. The test of cladding pumped scheme program shows good agreement with the experimental result. The experimental results of core pumping Tm Ho doped fiber laser in fluoride host are compared with the present model, and shows a good agreement with calculations. This model also provides data of the optimum parameters for the configuration of the efficient cladding pumped Tm Ho fluoride laser systems.
文摘A laser-diode-pumped Nd: YAG laser Q-switched Passively with a YAG colorcenter chip has been deveolped. The Q-switched pulse output has a duration of 25-70ns,an energy of about 7.9 μJ and a repetition frequency of 1.25-5.0kHz when the laser cavityparameters and pump power are changed. The Q-switched dynamics is analyzed with therate equation theorry. The theoretical and experimental results agree well.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61308009 and 61405047the China Postdoctoral Science Foundation Funded Project under Grant No 2013M540288+2 种基金the Fundamental Research Funds for the Central Universities under Grant Nos HIT.NSRIF.2014044 and HIT.NSRIF.2015042the Science Fund for Outstanding Youths of Heilongjiang Province under Grant No JQ201310the Heilongjiang Postdoctoral Science Foundation Funded Project under Grant No LBH-Z14085
文摘We demonstrate a cw and actively Q-switched Er：LuAO laser resonantly dual-end-pumped by 1532nm fibre- coupled laser diodes. A maximum cw output power of 1.9W at 1650.3nm is obtained at a pump power of 25.5 W, corresponding to a slope efficiency of 43.3 %. In the Q-switched regime, the maximum pulse energy of 3.51 mJ is reached at a pulse repetition rate of 100 Hz, a pulse duration of 90.5ns and a pump power of 25.5 W. At the repetition rate of 400 Hz, the output energy is 2.12m J, corresponding to a pulse duration of 125.4 ns.
基金Supported by the National Key Basic Research Program of China under Grant No 2013CB922402the International Joint Research Program of the National Natural Science Foundation of China under Grant No 61210017
文摘We demonstrate a diode-pumped passively cw mode-locked Nd：CaGdAlO4 laser operating at 1079nm with a semiconductor saturable absorber mirror for the first time to the best of our knowledge. The threshold pump power of the laser is 180mW. A maximum average output power of 93mW is obtained under the pump power of 1.94 W. The pulse duration of the mode-locked pulses is 3.1ps and the repetition rate is 157MHz.
基金Project supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB16030200)the National Natural Science Foundation of China(Grant Nos.11774410 and 61575217)+1 种基金the National Key Scientific Instruments Development Program of China(Grant No.2012YQ120047)the Key Research Program of Frontier Sciences of Chinese Academy of Sciences(Grant No.KJZD-EW-L11-03)
文摘A compact high power diode-pumped passively mode-locked Nd:YVO_4 laser with high repetition rate is realized.Using an Nd:YVO_4 crystal and a semiconductor saturable absorber mirror(SESAM) in the oscillator, the picosecond pulse output with an average power of 1.38 W, a repetition rate of 3.24 GHz, and a pulse duration of 11.4 ps is achieved. After one stage of amplification, the final output power reaches 11.34 W, corresponding to a total optical-to-optical efficiency of about 32%. The root mean square(RMS) value of power fluctuation is demonstrated to be less than 0.6% in 24 hours,showing a superior stability with the compact configuration.
基金Supported by the National Natural Science Foundation of China under Grant No 60508013, and the Knowledge Innovation Programme of Chinese Academy of Sciences under Grant No KJCX1-05.
文摘A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam quality at high power, thermally near-unstable flat-flat resonators with two-rod birefringence compensation are designed to obtain the large fundamental mode size inside the Nd：YAG rods and the same beam width inside the KTP crystal. The optimal intracavity power ratio of both 1064nm and 1319nm beams is also considered. The output power fluctuation of the yellow laser remains less than 5% in four hours.
基金supported by the National Natural Science Foundation of China(Nos.11674269,61975168).
文摘Here we developed a novel wavelength-switchable visible continuous-wave(CW)Pr^(3+):YLF laser around 670 nm.In single-wavelength laser operations,the maximum output powers of 2.60 W,1.26 W,and 0.21 W,the maximum slope efficiencies of 34.7%,27.3%,and 12.3%were achieved with good beam qualities(M^(2)<1.6)at 670.4 nm,674.2 nm,and 678.9 nm,respectively.Record-high output power(2.6 W)and record-high slope efficiency(34.7%)were achieved for the Pr^(3+):YLF laser operation at 670.4 nm.This is also the first demonstration of longer-wavelength peaks beyond 670 nm in the^(3)P_(1)→^(3)F_(3)transition of Pr^(3+):YLF.In multi-wavelength laser operations,the dual-wavelength lasings,including 670.1/674.8 nm,670.1/679.1 nm,and 675.0/679.4 nm,were obtained by fine adjustment of one/two etalons within the cavity.Furthermore,the triple-wavelength lasings,e.g.672.2/674.2/678.6 nm and 670.4/674.8/679.4 nm,were successfully demonstrated.Moreover,both the first-order vortex lasers(LG_(0)^(+1)and LG_(0)^(-1)modes)at 670.4 nm were obtained by off-axis pumping.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61107086, 61172010, and 61101058)the Science and Technology Committee of Tianjin, China (Grant No. 11JCYBJC01100)the National High Technology Research and Development Program of China (Grant No. 2011AA010205)
文摘We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60308001 and 60490280-1, the Knowledge Innovation Project of Chinese Academy of Sciences under Grant No KJXC-SW-W14, the National Natural Science Foundation of China under Grant Nos 50572054 and 50590401, the Natural Science Foundation of Shandong Province under Grant No Y2004F01, and the National Basic Research Program of China under Grant No 2004CB619002.
文摘We report the compact diode-pumped continuous-wave （CW） Nd：LuV04 lasers operated at 916nm and 458nm for the first time. The maximum output power of 780mW at 916nm laser is obtained with a slope efficiency of 9.3%. We generate 50roW of 458nm blue laser employing a type-Ⅰ critical phase-matched LBO crystal.
基金supported by the National Science Foundation of China under Award Nos.12074353 and 12075227.
文摘The use of broadband laser technology is a novel approach for inhibiting processes related to laser plasma interactions(LPIs).In this study,several preliminary experiments into broadband-laser-driven LPIs are carried out using a newly established hundreds-of-joules broadband second-harmonic-generation laser facility.Through direct comparison with LPI results for a traditional narrowband laser,the actual LPI-suppression effect of the broadband laser is shown.The broadband laser had a clear suppressive effect on both back-stimulated Raman scattering and back-stimulated Brillouin scattering at laser intensities below 1×10^(15) W cm^(−2).An abnormal hot-electron phenomenon is also investigated,using targets of different thicknesses.
基金Project supported by the National High Technology Research and Development Program and the National Natural Science Foundation of China (Grant No. 60508013)
文摘This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd：YAG master oscillator-power amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation fiat-fiat cavity was adopted as the master oscillator. A solid etalon was inserted in the unidirectional ring resonator to compress the laser linewidth. Under a repetition rate of 500 Hz and pulse width of 160 μs, the master oscillator delivers an average output power of 16.8 W at 1319 nm with linear polarisation, beam quality factor M^2=1.16 and linewidth of 3.2 GHz. A double-pass power amplifier with two amplifier stages was employed for higher power scaling and the output power was amplified to be 25.9 W with M^2 = 1.43.
基金supported by the National Natural Science Foundation of China under Grant Nos.61178056,61422511,and 51432007
文摘The effect of co-doping Y3＋ and the doping concentration of Nd3＋ on the spectroscopic properties and laser performance of Nd：CaF2 crystals are investigated systematically. For a 0.5% Nd：CaF2 crystal, the emission life- time at 1.06 μm increases from 18 to 361 μs by co-doping 10 at.% Y3＋, while the emission cross section increases to 4.27 × 10^-20 cm2 at 1054 nm. With a 10 at.% doping concentration of Y3＋, Nd, Y：CaF2 crystals concentrate emission bands that peak at 1054 nm with shoulders at 1063 nm, and FWHM at about 30 nm. A diode-pumped, highly efficient laser operation is obtained with 0.5% Nd, 1070 Y：CaF2 and 0.6% Nd, 1070 Y：CaF2 crystals, with slope efficiencies over 30% and 27%, respectively, and a maximum output power up to 901 mW.
基金supported by the 2021 Open Project Fund of Science and Technology on Electromechanical Dynamic Control Laboratory,grant number 212-C-J-F-QT-2022-0020China Postdoctoral Science Foundation,grant number 2021M701713+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province,grant number KYCX23_0511the Jiangsu Funding Program for Excellent Postdoctoral Talent,grant number 20220ZB245。
文摘The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.
基金the National Natural Science Foundation of China(Grant No.42020104006).
文摘Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a processebased physical modeling of a pileereinforced reservoir landslide and present an improved deformation analysis involving large strains and water effects.We collect multieperiod point clouds using a terrain laser scanner and reconstruct its deformation field through a point cloud processing workflow.The results show that this method can accurately describe the landslide surface deformation at any time and area by both scalar and vector fields.The deformation fields in different profiles of the physical model and different stages of the evolutionary process provide adequate and detailed landslide information.We analyze the large strain upstream of the pile caused by the pile installation and the consequent violent deformation during the evolutionary process.Furthermore,our method effectively overcomes the challenges of identifying targets commonly encountered in geotechnical modeling where water effects are considered and targets are polluted,which facilitates the deformation analysis at the wading area in a reservoir landslide.Eventually,combining subsurface deformation as well as numerical modeling,we comprehensively analyze the kinematics and failure mechanisms of this complicated object involving landslides and pile foundations as well as water effects.This method is of great significance for any geotechnical modeling concerning large-strain analysis and water effects.
基金funded by the National Key Research and Development Program of China(2018YFE0104200)National Natural Science Foundation of China(51875310,52175274,82172065)Tsinghua Precision Medicine Foundation.
文摘Laser powder bed fusion(L-PBF)of Mg alloys has provided tremendous opportunities for customized production of aeronautical and medical parts.Layer thickness(LT)is of great significance to the L-PBF process but has not been studied for Mg alloys.In this study,WE43 Mg alloy bulk cubes,porous scaffolds,and thin walls with layer thicknesses of 10,20,30,and 40μm were fabricated.The required laser energy input increased with increasing layer thickness and was different for the bulk cubes and porous scaffolds.Porosity tended to occur at the connection joints in porous scaffolds for LT40 and could be eliminated by reducing the laser energy input.For thin wall parts,a large overhang angle or a small wall thickness resulted in porosity when a large layer thicknesses was used,and the porosity disappeared by reducing the layer thickness or laser energy input.A deeper keyhole penetration was found in all occasions with porosity,explaining the influence of layer thickness,geometrical structure,and laser energy input on the porosity.All the samples achieved a high fusion quality with a relative density of over 99.5%using the optimized laser energy input.The increased layer thickness resulted to more precipitation phases,finer grain sizes and decreased grain texture.With the similar high fusion quality,the tensile strength and elongation of bulk samples were significantly improved from 257 MPa and 1.41%with the 10μm layer to 287 MPa and 15.12%with the 40μm layer,in accordance with the microstructural change.The effect of layer thickness on the compressive properties of porous scaffolds was limited.However,the corrosion rate of bulk samples accelerated with increasing the layer thickness,mainly attributed to the increased number of precipitation phases.
基金The Health Science and Technology Foundation of Inner Mongolia,No.202201436Science and Technology Innovation Foundation of Inner Mongolia,No.CXYD2022BT01.
文摘BACKGROUND In recent years,confocal laser endomicroscopy(CLE)has become a new endoscopic imaging technology at the microscopic level,which is extensively performed for real-time in vivo histological examination.CLE can be performed to distinguish benign from malignant lesions.In this study,we diagnosed using CLE an asymptomatic patient with poorly differentiated gastric adenocarcinoma.CASE SUMMARY A 63-year-old woman was diagnosed with gastric mucosal lesions,which may be gastric cancer,in the small curvature of the stomach by gastroscopy.She consented to undergo CLE for morphological observation of the gastric mucosa.Through the combination of CLE diagnosis and postoperative pathology,the intraoperative CLE diagnosis was considered to be reliable.According to our experience,CLE can be performed as the first choice for the diagnosis of gastric cancer.CONCLUSION CLE has several advantages over pathological diagnosis.We believe that CLE has great potential in the diagnosis of benign and malignant gastric lesions.
文摘A kilowatt diode-pumped solid state heat capacity laser is fabricated with a double-slab Nd：YAG. Using the theoretical model of heat capacity laser output laser characteristics, the relationships between the output power, temperature and time are obtained. The slab is 59 × 40×4.5mm^3 in size. The average pump power is 11.2kW, the repetition rate is i kHz, and the duty cycle is 20%. During the running time of i s, the output energy of the laser has a fluctuation with the maximal output energy at 2.06 J, and the maximal output average power is 2.06kW. At the end of the second, the output energy declines to about 50% compared to the beginning. The therma/effects can be improved with one slab cooled by water. The experimental results are consistent with the calculation data.
