This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate mat...This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate matter samples(PM_(2.5))using ion-imprinted polymers as adsorbent packed in minicolumn.A bulk polymerization method was chosen to synthesize the polymer based on a ternary complex of lead ions with 4-2-pyridilazo resorcinol and 4-vinyl pyridine with methacrylic acid as a functional monomer.The optimum pH for sorption was 6,and other variables for the FIA system were optimized,including breakthrough volume,eluent concentration,and eluent volume.The optimum conditions were reached with a breakthrough volume of 4.45 mL,calculated as a dynamic retention capacity of 5.20 mg/g of Pb(II)40 mg/L,with a 1.5 mL/min flow rate.The eluent used for the FIA system was 0.5 mL HNO_(3)of 3 mol/L.Linearity,precision,and limits of detection of the FIA system were determined before being applied to preconcentration and analysis of lead ions in PM_(2.5)samples.The precision of the method was determined to be 3.09%by calculating the coefficients of the variant.Linearity of the method in the concentration range of 50-1000μg/L gave a coefficient correlation of 0.9925,showing a good response,and the limit of detection of the system was 5.11μg/L,better than that of the FAAS method.Performances of the FIA system were evaluated and showed good results with an enrichment factor of more than 20 times higher and a concentration efficiency of 11.65 min^(-1)with a consumptive index of 4.5 mL.Preconcentration and analysis of the PM_(2.5)samples in Bandung City showed the concentrations of Pb(II)were 26.67μg/L and 33.3μg/L with the accuracy of the method for each sample of104.75%and 107.86%.展开更多
Objectives:Based on the information from the random inspection of foods by the China Food and Drug Administration in 2022,the contamin-ation levels of lead ions are high in many edible products.Traditional methods of ...Objectives:Based on the information from the random inspection of foods by the China Food and Drug Administration in 2022,the contamin-ation levels of lead ions are high in many edible products.Traditional methods of detecting lead ions cannot meet the requirements of on-site analysis of food due to the need for large equipment.The immunochromatographic assay(iCA)is an effective,rapid,on-site analytical technique for determining lead ions in foods.However,the performance of ICA based on the traditional probe(AuNP-mAb)is limited by ignoring the influ-ence of theantibody orientation.Materials and Methods:In this study,we developed an efficient technology for constructing a universal probe(AuNP-PrA-mAb)based on the oriented immobilization of antibody.The performance of ICA was largely improved due to specific binding of the Fc region of the antibody with recombinant protein A(PrA)on the surface of a gold nanoparticle(AuNP).The ICA based on a universal probe was applied for the qualitative and quantitative detection of lead ions in Procambarus clarki within 30 min.Meanwhile,a simple and fast pretreatment method based on dilute acid extraction was developed forpretreating thePclarkii containing leadions.Results:The visual limit of detection and the scanning limit of quantization of the developed iCA strip for lead ions were O.5 ng/mL and 0.28 ng/mL,respectively.The sensitivity of ICA based on universal probe was 10-fold higher than that of the ICA using traditional probe.Furthermore,the detection results had no obvious difference between the ICA and ICP-MS with t-test statistical method.Conclusions:The developed ICA based on a universal probe presented broad application prospects in detecting contaminants in foods.展开更多
Lignin is one of the major contents of lignocellulose and can be used as feedstock for adsorbent materials for wastewater treatment.Here,a lignin-poly(N-methylaniline)-graphene oxide(lignin-PNMA-rGO)hydrogel has been ...Lignin is one of the major contents of lignocellulose and can be used as feedstock for adsorbent materials for wastewater treatment.Here,a lignin-poly(N-methylaniline)-graphene oxide(lignin-PNMA-rGO)hydrogel has been prepared by a two-step method,microspheres of lignin-PNMA was synthesis by the polymerization of NMA monomer in the presence of lignin in aqueous solution,and then they were encapsulated by the as-prepared reduced graphene oxide(GO)hydrogel via a reduction induced self-assembly of the GO nanosheets.The scanning electron microscopy(SEM),Fourier transform infrared(FT-IR),X-ray diffraction(XRD),and UV-Vis studies have been carried out and revealed that the formation of the 3D porous nanocomposite hydrogel with multilevel structures and sufficient active sites.The lignin-PNMA-rGO adsorbent exhibited high adsorption capacity for both organic dye methylene blue(MB,201.7 mg/g)and Pb 2+ion(753.5 mg/g).The new lignin-based adsorbent is a low-cost,environmentally benign,which is an attractive adsor-bent for wastewater treatment.展开更多
Measurement of the neutron yield is performed at a primary energy of 400 MeV/u carbons for the Pb target.Water-bath activation-foil method is used in a moderation measurement with Au foils to detect the moderated neut...Measurement of the neutron yield is performed at a primary energy of 400 MeV/u carbons for the Pb target.Water-bath activation-foil method is used in a moderation measurement with Au foils to detect the moderated neutrons. The neutron yield is determined to be 18.4±2.1 per carbon by integrating the neutron flux over the entire water volume. The corresponding simulation values are performed by Geant4 code with three models to compare with the experimental results. The comparison shows that the calculated result with the INCL model is in good agreement with the experimental data.展开更多
A novel magnetic chelating adsorbent （CPMS） with iminodiacetate functionality was prepared by polymerization of glycidyl methacrylate-iminodiacetic acid （GMA-IDA） monomer with N, N-methylenebisacrylamide as crossl...A novel magnetic chelating adsorbent （CPMS） with iminodiacetate functionality was prepared by polymerization of glycidyl methacrylate-iminodiacetic acid （GMA-IDA） monomer with N, N-methylenebisacrylamide as crosslinker in the presence of monodisperse magnetic silica microspheres （MS）. CPMS was characterized by IR, SEM, VSM and TGA. The experimental results revealed that MS was embedded in the gel polymer, but the morphology of CPMS was irregular. The saturation magnetization for CPMS was found to be 28.4 emu/g, and the percentage of GMA-IDA polymer grafted on MS was about 46.5%. CPMS were shown to be efficient for the removal of Pb（II） ions at pH 3.0 - 6.0, and the adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 54.4 mg？g？1 at pH 5.0. Moreover, the adsorption rate of CPMS was fast and it took about 5 minutes to achieve adsorption equilibrium in aqueous solution of lower lead ions concentration.展开更多
The effect and mechanism of the removal of Pb^(2+) from an aqueous solutionby using brucite as the adsorbent were studied. It was revealed that the increase in pH of brucitesuspension, as a result of the release of ma...The effect and mechanism of the removal of Pb^(2+) from an aqueous solutionby using brucite as the adsorbent were studied. It was revealed that the increase in pH of brucitesuspension, as a result of the release of magnesium hydroxide into the suspension, leads to a sharprise of the adsorption amount of Pb^(2+) on brucite. The synergism of buffering and adsorptioncapacities of brucite is responsible for the removal of Pb^(2+) from the aqueous solution. Thecoexistence of Cu^(2+) with Pb^(2+) causes a decrease of their adsorption on brucite due to acompetition for surface sites and brucite exhibits a higher adsorption capacity for Pb^(2+) than forCu^(2+). The percentage adsorption of Pb^(2+) on brucite could reach 96.38 percent, 97.20 percentand 94.09 percent respectively with the initial pH of the suspension pH_i = 1.76 (initial Pb^(2+)concentration [Pb^(2+)]_i = 20 mumol/L), 1.82 ([Pb^(2+)]_i = 100 mumol/L) and 1.84 ([Pb^(2+)]_i =500 mumol/L). It was concluded that brucite is a very efficient mineral adsorbent for Pb^(2+)removal from polluted acidic water.展开更多
The growth of Phanerochaete chrysosporium (ATCC 24725) in pellets was influenced by culture time, medium pH, C/N, surfactant concentration, spore number in inoculum, and shaking rate. The removal of Pb 2+ from...The growth of Phanerochaete chrysosporium (ATCC 24725) in pellets was influenced by culture time, medium pH, C/N, surfactant concentration, spore number in inoculum, and shaking rate. The removal of Pb 2+ from aqueous solution by this kind of mycelial pellets was studied. The results indicated that many factors affected biosorption. These factors included pH, Pb 2+ concentration, co ion, adsorption time, and chemical pretreatments of biomass. Under optimum biosorption conditions(pH 4 5, 27℃, 16h), the highest lead uptake of 108 mg/g, was observed with mycelial pellets of 1 5-1 7 mm in diameter which were treated with 0 1 mol/L NaOH solution before adsorption. Pretreatment of biomass with NaOH further increased its biosorption capacity.展开更多
Kinetics and mechanisms on the removal of aqueous lead ion by carbonate hydroxyapatite （CHap） are investigated in the present work. Experimental results show that, in the whole pH range, the lead removal percentage ...Kinetics and mechanisms on the removal of aqueous lead ion by carbonate hydroxyapatite （CHap） are investigated in the present work. Experimental results show that, in the whole pH range, the lead removal percentage increases with decreasing pH values and reaches a maximum at pH=2-3. Under some conditions, the lead residual concentration is below national integrated wastewater discharge standard, even drinking water standard. The removal behavior is a complicated non-homogeneous solid/liquid reaction, which can be described by two stages from kinetic point of view. At the earlier stage, reaction rate is so fast that its kinetic course is intricate, which requires further study. At the latter stage, the rate of reaction becomes slow and the process of reaction accords with one order reaction kinetic equation. Experimental results show that the relationship between reaction rate constant k1 and temperature T accords to Arrhenius Equation, and the activation energy of sorption （Ea） is 11.93 kJ/mol and frequency factor （A） is 2.51 s^-1. X-ray diffraction （XRD）, scanning electron microscopy with an energy dispersive X-ray fluoresence spectrometer （SEM-EDS） and toxicity characteristic leaching procedure （TCLP） test were conducted in this work. It is indicated that the main mechanism is dissolution-precipitation, accompanying with superficial sorption.展开更多
The objective of this study is to develop carbon, that of <i></span><i><span style="font-family:Verdana;">Acacia auriculeaformis</span></i><span style="font-family...The objective of this study is to develop carbon, that of <i></span><i><span style="font-family:Verdana;">Acacia auriculeaformis</span></i><span style="font-family:Verdana;"></i></span><span style="font-family:Verdana;"> through its activation in order to eliminate lead in an aqueous medium. A series of activated carbon has been prepared by chemical activation with phosphoric acid, sodium hydroxide and sodium chloride. The determi</span><span style="font-family:Verdana;">nation of the physico-chemical properties of the prepared carbon guided the choice of phosphoric acid activated carbon as the best adsorbent for the</span><span style="font-family:Verdana;"> elimination of lead(II) in </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">an </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">aqueous solution. Pb</span><sup><span style="font-family:Verdana;">2+</span></sup><span style="font-family:Verdana;"> adsorption tests in batch mode have shown that the adsorption capacity is influenced by various parameters such as mass, pH, concentration of Pb<sup>2+</sup> ions and contact time linked to the medium and the adsorbent. Adsorption isotherms, kinetic models and thermodynamics have been used to describe the adsorption process. The equilibrium data for activated charcoal correspond well to the model of Freundlich, </span><span style="font-family:Verdana;">Langmuir, Temkin and Kiselev. The kinetic adsorption data proved to be </span><span style="font-family:Verdana;">better described by the pseudo-second order model with </span><span style="font-family:Verdana;">external and intraparticle diffusion which are two decisive steps in the</span><span style="font-family:Verdana;"> adsorption process of Pb<sup>2+</sup> ions. Thermodynamics and adsorption isotherms predict a spontaneous exothermic surface reaction, of the chemisorption type, with ion </span><span><span style="font-family:Verdana;">retention in orderly monolayers on the heterogeneous surface of the adsorbent. Tests carried out with this adsorbent material have contributed to the elimination of the Pb</span><sup><span style="font-family:Verdana;">2+</span></sup><span style="font-family:Verdana;"> ions contained in an industrial effluent with a </span></span><span style="font-family:Verdana;">reduction rate reaching 42.52% against 85.90% in a synthetic solution.展开更多
An electrochemical sensor incorporating a signal enhancement for the determination of lead （II） ions （Pb2＋） was designed on the basis of the thrombin-binding aptamer （TBA） as a molecular recog- nition element a...An electrochemical sensor incorporating a signal enhancement for the determination of lead （II） ions （Pb2＋） was designed on the basis of the thrombin-binding aptamer （TBA） as a molecular recog- nition element and ionic liquid supported cerium oxide （CeO2） nanoparticles-carbon nanotubes compo- site modification. The composite comprises nanoparticles CeO2, multi-waU carbon nanotubes （MWNTs） and hydrophobic room temperature ionic liquid （RTIL） 1-ethyl-3-methylimidazolium tetrafluoroborate （EMIMBF4）. The electrochemical sensors were fabricated by immersing the CeOa-MWNTs-EMIMBF4 modified glassy carbon electrode （GCE） into the solution of TBA probe. In the presence of Pb2＋, the TBA probe could form stable G-quartet structure by the specific binding interactions between Pb2＋ and TBA. The TBA-bound Pb2＋ can be electrochemically reduced, which provides a readout signal for quantitative detection of Pb2＋. The reduction peak current is linearly related to the concentration of Pb2＋ from 1.0 ＊ 10-8 M to 1.0 ＊ 105 M with a detection limit of 5 ＊ 109 M. This work demonstrates that the CeOz-MWNTs-EMIMBF4 nanocomposite modified GCE provides a promising platform for immobi- lizing the TBA probe and enhancing the sensitivity of the DNA-based sensors.展开更多
Al（OH）_3 modified nickel slag adsorbent was prepared by sintering technology. The structure of the sample was characterized by BET, XRD, IR, SEM and EDAX. The sample＇s adsorption performance of Pb^（2＋） and Cu^（...Al（OH）_3 modified nickel slag adsorbent was prepared by sintering technology. The structure of the sample was characterized by BET, XRD, IR, SEM and EDAX. The sample＇s adsorption performance of Pb^（2＋） and Cu^（2＋） from aqueous solution was studied. Results indicated that the adsorbent is a loose and porous mesoporous material. Its surface had mass aluminosilicate, high-activity γ-Al_2O_3 and its p H ranges from 4 to 12 that all have negative charges. The BET surface of the adsorbent is 23.90 m^2/g. Furthermore, its surface contains rich oxygenic functional groups, which could not only provide abundant adsorption sites for Pb^（2＋） and Cu^（2＋）, but also improve the adsorption performance of Pb^（2＋） and Cu^（2＋） from waste water through the complexation of heavy metal ions. The best p H values selected in the adsorption of Pb^（2＋） and Cu^（2＋） are 6 and 5, respectively. With the increase of the initial concentration of simulated solution, the adsorption capacities of Pb^（2＋） and Cu^（2＋） gradually increased but the removal rates showed a downward trend. The competitive adsorption results of Pb^（2＋） and Cu^（2＋） showed that Pb^（2＋） has better preferential adsorption than Cu^（2＋）.展开更多
Desulphurization slag modified nickel slag adsorbent was prepared by unburned forming technology. The structure of the sample was characterized by BET,XRD,IR,SEM and EDAX. The adsorption performance of Pb^2＋ and Cu^2...Desulphurization slag modified nickel slag adsorbent was prepared by unburned forming technology. The structure of the sample was characterized by BET,XRD,IR,SEM and EDAX. The adsorption performance of Pb^2＋ and Cu^2＋ onto the resultant adsorbent from aqueous solution was studied. Results indicated that the adsorbent possesses a network pore structure formed by the AFt and C–S–H through cross lapping; the adsorbent contains a large number of Si–OH and Al–OH functional groups. The presence of functional groups not only provides abundant adsorption sites for Pb^2＋ and Cu^2＋,but also improves the adsorption performance of Pb^2＋ and Cu^2＋ from waste water through the complexation of heavy metal ions. The result of specific surface area analysis showed that the adsorbent sample possesses mesoporous structure and the BET specific surface area is 27.15 m^2/g. The solution p H values for the adsorption of Pb^2＋ and Cu^2＋ were optimized to be 6 and 5.5,respectively. The adsorption capacities of Pb^2＋ and Cu^2＋ gradually increase,whereas the removal rates of the two metal ions decrease with increasing the initial concentration of simulated solution. The resultant adsorbent gives a higher adsorption capacity for Cu^2＋ than for Pb^2＋ in the single ion solution. However,it shows preferential adsorption of Pb^2＋ rather than that of Cu^2＋. Meanwhile,results of recyclability indicate the remarkable regeneration capacity,re-adsorption ability and reusability performance of the adsorbent sample.展开更多
A novel ion-imprinted polymer, lead ion-imprinted micro-beads with combination of two functional monomers, was synthesized using the W/O/W polymerization method. Two functional monomers, 1,12-dodecanediol-O,O’-diphen...A novel ion-imprinted polymer, lead ion-imprinted micro-beads with combination of two functional monomers, was synthesized using the W/O/W polymerization method. Two functional monomers, 1,12-dodecanediol-O,O’-diphenyl-phosphonic acid （DDDPA） and 4-vinylpyridine, were used to form a suitable construction with micro-pores fitting the template and recognition sites. The eflects of adsorbent dosage, solution pH and the competitive ions on the adsorption and separation eflciency of lead ions were investigated. The lead ion-imprinted micro-beads were eflcient for lead ions removal from aqueous solution in a broad pH range （4–9）, when the adsorbent dosage was above 0.1 g/L. The adsorption process obeyed the pseudo second-order kinetics model and it only took half an hour to reach the equilibrium. The adsorption isotherm of lead ion was described by the Langmuir model （R2 0.99） with a maximum adsorption capacity of 116.9 mg/g. In the presence of competitive ions Co2＋ and Cd2＋, the lead ion-imprinted micro-beads showed a high selectivity for lead ions. The selectivity coeficient of Pb2＋/Cd2＋ and Pb2＋/Co2＋are 99.3 and 114.7, respectively.展开更多
A new glassy carbon electrode modified with novel caHx[4]arene derivative was prepared and then applied to the selective recognition of lead ion in aqueous media by cyclic and square wave voltammtry. A new anodic stri...A new glassy carbon electrode modified with novel caHx[4]arene derivative was prepared and then applied to the selective recognition of lead ion in aqueous media by cyclic and square wave voltammtry. A new anodic stripping peak at - 0.92 V (vs. Ag/Ag+) in square wave voltammogram can be obtained by scanning the potential from - 1.5 to - 0.6 V, of which the peak current is proportional to the concentration of Pb2+. The modified electrode in 0.1 moVL HNO3 solution showed a linear voltammetric response in the range of 2.0 x 10(-8)-1.0 x 10(-6) mol/L and a detection limit of 6.1 x 10(-9) mol/L. In the modified glassy carbon electrode no significant interference occurred from alkali, alkaline and transition metal ions except Hg2+, Ag+ and Cu2+ ions, which can be eliminated by the addition of KSCN. The proposed method was successfully applied to determine lead in aqueous samples.展开更多
Direct mixture of Au^3＋ with glutathione （GSH）, which act as both reduction agents and stabilizers, in aqueous solution gave rise to production of gold nanoparticles （Au NPs） with uniform sizes of around 21 nm. T...Direct mixture of Au^3＋ with glutathione （GSH）, which act as both reduction agents and stabilizers, in aqueous solution gave rise to production of gold nanoparticles （Au NPs） with uniform sizes of around 21 nm. The GSH stabilizer Au NPs in solution show immediate aggregation after addition of 1 mol/L NaCI aqueous solution containing Pb^2＋ ions. The Pb^2＋-induced aggregation in Au NP solution is monitored by both colorimetric response and UV-vis spectroscopy. A rather broad linear range （from 0.1 to 30 pmol/L） and low detection limit （0.1 pmol/L） are explored for Au NP sensors used for detection of Pb^2＋ ions. Furthermore, the response of GSH-stabilized Au NPs toward Pb^2＋ ions is specific compared with other possible interferants （Hg^2＋, Mg^2＋, Zn^2＋, Ni^2＋, Cu^2＋, Co^2＋, Ca^2＋, Mn^2＋, Cd^2＋, and Ba^2＋）.展开更多
A series of novel and simple ligands based on a biscarboxyl-functionalized benzimidazole derivative were synthesized.The experiments showed that the ligand L2 as a low molecular weight(LMW) hydrogelator could form sta...A series of novel and simple ligands based on a biscarboxyl-functionalized benzimidazole derivative were synthesized.The experiments showed that the ligand L2 as a low molecular weight(LMW) hydrogelator could form stable metallo-hydrogels in the presence of up to 0.3 equiv.of lead ions.The metallo-hydrogels were characterized using powder X-ray diffraction,scanning electron microscopy(SEM),and Fourier transform infrared(FT-IR) spectroscopic techniques.When the molar ratio of L2:Pb2+ was in the range of 1:0.3 to 1:0.5 a translucent gel was produced.When the L2:Pb2+ molar ratio was higher than 1:0.5 the resulting gel tended to be opaque.The morphologies of these metallo-hydrogels were L2/Pb ratio dependent,ranging from worm-like to rod-shaped and nanofibrous.The FT-IR and X-ray diffraction(XRD) studies revealed that L2-Pb complexation was the main driving force for the formation of the metallo-hydrogels.In addition,these metallo-hydrogels exhibited outstanding thermostability and thermoreversibility,and displayed a reversible sol-gel transition induced by changes in pH and EDTA concentration.Importantly,ligand L2 showed an excellent capacity for the removal of Pb 2+ in aqueous solution through the formation of metallo-hydrogels.At a L2:Pb molar ratio of 1:0.5 and below,the concentration of residual Pb2+ was as low as 7.6×10-5 mol/L in aqueous solution,and the removal ratio was as high as 95.4%.These results demonstrate that multi-channel responsive smart metallo-hydrogels have the potential to be widely applied in materials science,and might provide the basis for lead pollution capture and removal.展开更多
An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode(nano-PPCPE)has been successfully developed,and used to detect Cd^2+ and Pb^2+.The experimental results showed that the electrochem...An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode(nano-PPCPE)has been successfully developed,and used to detect Cd^2+ and Pb^2+.The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode(GCE)and pure carbon paste electrode(CPE).Then the prepared nano-PPCPE was applied to detect Cd^2+ and Pb^2+in standard solution,the results showed that the electrodes can quantitatively detect trace Cd^2+ and Pb^2+,which has great significance in electrochemical analysis and detection.The linear ranges between the target ions concentration and the D PASV current were from 0.1-3.0 μmol/L,0.05-4.0 μmol/L for Cd^2+ and Pb^2+,respectively.And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L,respectively.Moreover,the preparation of the nano-PPCPE is cheap,simple and has important practical value.展开更多
Highly crystalline β-type strontium hydrogen phosphate （β-SrHPO4） nanosheets were prepared by a hydro- thermal method and used for the immobilization of lead ions （Pb2＋） from acidic aqueous solution. The effect...Highly crystalline β-type strontium hydrogen phosphate （β-SrHPO4） nanosheets were prepared by a hydro- thermal method and used for the immobilization of lead ions （Pb2＋） from acidic aqueous solution. The effects of various parameters on the immobilization process, including solution pH value, contact time, initial ion concentrations, and coexistent competing cations, were studied to optimize the conditions for maximum immobilization. The β-SrHPO4 nanosheets exhibited a capacity of （1,120 ± 22） mg/g toward Pb2＋ in acidic solution （pH value is 3.0）, and the equilibrium was achieved within 8 rain. The competing cations such as Cu2＋, Zn2＋, Cd2＋, and Co2＋ affected slightly on the selective immobilization of Pb2＋. The results revealed that the removal mechanism of Pb2＋ by the β-SrHPO4 nanosheets was the dissolution/precipitation process in the acidic solution.展开更多
In this paper,we proposed a facile and accurate way for controlling multiplex fluorescent logic gates through changing the exciting and the observing wavelengths.As proof-of-principle,a Pb2+-specific DNAzyme probe and...In this paper,we proposed a facile and accurate way for controlling multiplex fluorescent logic gates through changing the exciting and the observing wavelengths.As proof-of-principle,a Pb2+-specific DNAzyme probe and a thymine(T)-rich DNA probe were introduced to a double-stranded(ds-)DNA.The addition style of the two ions served as the four inputs by changing the distance of the three fluorophores,6-carboxyfluorescein(FAM),ALEXA 532(ALEXA)and carboxytetramethylrhodamine(TAMRA),all of which were modified on the dsDNA probe.Compared with the previous methods,the present approach needed neither different inputs nor the change of sequence of the probe to achieve multiplex logic gates.Furthermore,the modularity of the strategy may allow it to be extended to other types of logic gates.展开更多
A new type of self-targeting carbon dot （CD-Fla） for the detection of the toxic heavy metal ion Pb^2＋ was synthesized via a one-pot hydrothermal route using flavonoid extracts of Ginkgo biloba leaves as the startin...A new type of self-targeting carbon dot （CD-Fla） for the detection of the toxic heavy metal ion Pb^2＋ was synthesized via a one-pot hydrothermal route using flavonoid extracts of Ginkgo biloba leaves as the starting material. As-prepared CD-Fla exhibited excellent biocompatibility and strong blue emission with a quantum yield of 16.1% and significant fluorescence quenching selectivity for Pb^2＋ without using any additional targeting molecules. CD-Fla could detect Pb^2＋ quantitatively within the range 0.1-20.0 nM, with an ultrahigh sensitivity of 55 pM. The selectivity of CD-FIa for Pb^2＋ was nearly one order of magnitude higher than that for other relevant metal ions. This was much better than ever reported CD-based metal ion sensors. The high sensitivity and selectivity were due to the incorporation of certain flavonoid-like moieties into CD-Fla. CD-Fla was also demonstrated to be a good probe for fluorescence tracing of intracellular Pb^2＋. The capability of CD-Fla was further improved when it was doped on agarose hydrogel. CD-Fla-doped agarose hydrogel （CD-AHG） allowed for visual fluorescence detection and removal of Pb^2＋ from water. This was confirmed by testing CD-AHG in actual water samples taken from the Jialing River （Chongqing, China）. The Pb^2＋ adsorbed CD-AHG was regenerable in HC1 solution. This study will open a new avenue for synthesizing intelligent materials capable of simultaneously targeting, detecting, and treating heavy metal ions.展开更多
基金Badan Riset dan Inovasi Nasional,Dissertation research grant。
文摘This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate matter samples(PM_(2.5))using ion-imprinted polymers as adsorbent packed in minicolumn.A bulk polymerization method was chosen to synthesize the polymer based on a ternary complex of lead ions with 4-2-pyridilazo resorcinol and 4-vinyl pyridine with methacrylic acid as a functional monomer.The optimum pH for sorption was 6,and other variables for the FIA system were optimized,including breakthrough volume,eluent concentration,and eluent volume.The optimum conditions were reached with a breakthrough volume of 4.45 mL,calculated as a dynamic retention capacity of 5.20 mg/g of Pb(II)40 mg/L,with a 1.5 mL/min flow rate.The eluent used for the FIA system was 0.5 mL HNO_(3)of 3 mol/L.Linearity,precision,and limits of detection of the FIA system were determined before being applied to preconcentration and analysis of lead ions in PM_(2.5)samples.The precision of the method was determined to be 3.09%by calculating the coefficients of the variant.Linearity of the method in the concentration range of 50-1000μg/L gave a coefficient correlation of 0.9925,showing a good response,and the limit of detection of the system was 5.11μg/L,better than that of the FAAS method.Performances of the FIA system were evaluated and showed good results with an enrichment factor of more than 20 times higher and a concentration efficiency of 11.65 min^(-1)with a consumptive index of 4.5 mL.Preconcentration and analysis of the PM_(2.5)samples in Bandung City showed the concentrations of Pb(II)were 26.67μg/L and 33.3μg/L with the accuracy of the method for each sample of104.75%and 107.86%.
基金supported by the National Natural Science Foundation of China(No.32102072).
文摘Objectives:Based on the information from the random inspection of foods by the China Food and Drug Administration in 2022,the contamin-ation levels of lead ions are high in many edible products.Traditional methods of detecting lead ions cannot meet the requirements of on-site analysis of food due to the need for large equipment.The immunochromatographic assay(iCA)is an effective,rapid,on-site analytical technique for determining lead ions in foods.However,the performance of ICA based on the traditional probe(AuNP-mAb)is limited by ignoring the influ-ence of theantibody orientation.Materials and Methods:In this study,we developed an efficient technology for constructing a universal probe(AuNP-PrA-mAb)based on the oriented immobilization of antibody.The performance of ICA was largely improved due to specific binding of the Fc region of the antibody with recombinant protein A(PrA)on the surface of a gold nanoparticle(AuNP).The ICA based on a universal probe was applied for the qualitative and quantitative detection of lead ions in Procambarus clarki within 30 min.Meanwhile,a simple and fast pretreatment method based on dilute acid extraction was developed forpretreating thePclarkii containing leadions.Results:The visual limit of detection and the scanning limit of quantization of the developed iCA strip for lead ions were O.5 ng/mL and 0.28 ng/mL,respectively.The sensitivity of ICA based on universal probe was 10-fold higher than that of the ICA using traditional probe.Furthermore,the detection results had no obvious difference between the ICA and ICP-MS with t-test statistical method.Conclusions:The developed ICA based on a universal probe presented broad application prospects in detecting contaminants in foods.
基金the National Natural Science Foundation of China(No.51673180 and No.51873201)the Open Fund for Key Lab of Guangdong High Property and Functional Macromolecular Materials,China(20190014).
文摘Lignin is one of the major contents of lignocellulose and can be used as feedstock for adsorbent materials for wastewater treatment.Here,a lignin-poly(N-methylaniline)-graphene oxide(lignin-PNMA-rGO)hydrogel has been prepared by a two-step method,microspheres of lignin-PNMA was synthesis by the polymerization of NMA monomer in the presence of lignin in aqueous solution,and then they were encapsulated by the as-prepared reduced graphene oxide(GO)hydrogel via a reduction induced self-assembly of the GO nanosheets.The scanning electron microscopy(SEM),Fourier transform infrared(FT-IR),X-ray diffraction(XRD),and UV-Vis studies have been carried out and revealed that the formation of the 3D porous nanocomposite hydrogel with multilevel structures and sufficient active sites.The lignin-PNMA-rGO adsorbent exhibited high adsorption capacity for both organic dye methylene blue(MB,201.7 mg/g)and Pb 2+ion(753.5 mg/g).The new lignin-based adsorbent is a low-cost,environmentally benign,which is an attractive adsor-bent for wastewater treatment.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11575267,11775284,11575289 and 11605258
文摘Measurement of the neutron yield is performed at a primary energy of 400 MeV/u carbons for the Pb target.Water-bath activation-foil method is used in a moderation measurement with Au foils to detect the moderated neutrons. The neutron yield is determined to be 18.4±2.1 per carbon by integrating the neutron flux over the entire water volume. The corresponding simulation values are performed by Geant4 code with three models to compare with the experimental results. The comparison shows that the calculated result with the INCL model is in good agreement with the experimental data.
文摘A novel magnetic chelating adsorbent （CPMS） with iminodiacetate functionality was prepared by polymerization of glycidyl methacrylate-iminodiacetic acid （GMA-IDA） monomer with N, N-methylenebisacrylamide as crosslinker in the presence of monodisperse magnetic silica microspheres （MS）. CPMS was characterized by IR, SEM, VSM and TGA. The experimental results revealed that MS was embedded in the gel polymer, but the morphology of CPMS was irregular. The saturation magnetization for CPMS was found to be 28.4 emu/g, and the percentage of GMA-IDA polymer grafted on MS was about 46.5%. CPMS were shown to be efficient for the removal of Pb（II） ions at pH 3.0 - 6.0, and the adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 54.4 mg？g？1 at pH 5.0. Moreover, the adsorption rate of CPMS was fast and it took about 5 minutes to achieve adsorption equilibrium in aqueous solution of lower lead ions concentration.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50272008)Talent Training Program of Beijing (No. 2003A09)
文摘The effect and mechanism of the removal of Pb^(2+) from an aqueous solutionby using brucite as the adsorbent were studied. It was revealed that the increase in pH of brucitesuspension, as a result of the release of magnesium hydroxide into the suspension, leads to a sharprise of the adsorption amount of Pb^(2+) on brucite. The synergism of buffering and adsorptioncapacities of brucite is responsible for the removal of Pb^(2+) from the aqueous solution. Thecoexistence of Cu^(2+) with Pb^(2+) causes a decrease of their adsorption on brucite due to acompetition for surface sites and brucite exhibits a higher adsorption capacity for Pb^(2+) than forCu^(2+). The percentage adsorption of Pb^(2+) on brucite could reach 96.38 percent, 97.20 percentand 94.09 percent respectively with the initial pH of the suspension pH_i = 1.76 (initial Pb^(2+)concentration [Pb^(2+)]_i = 20 mumol/L), 1.82 ([Pb^(2+)]_i = 100 mumol/L) and 1.84 ([Pb^(2+)]_i =500 mumol/L). It was concluded that brucite is a very efficient mineral adsorbent for Pb^(2+)removal from polluted acidic water.
文摘The growth of Phanerochaete chrysosporium (ATCC 24725) in pellets was influenced by culture time, medium pH, C/N, surfactant concentration, spore number in inoculum, and shaking rate. The removal of Pb 2+ from aqueous solution by this kind of mycelial pellets was studied. The results indicated that many factors affected biosorption. These factors included pH, Pb 2+ concentration, co ion, adsorption time, and chemical pretreatments of biomass. Under optimum biosorption conditions(pH 4 5, 27℃, 16h), the highest lead uptake of 108 mg/g, was observed with mycelial pellets of 1 5-1 7 mm in diameter which were treated with 0 1 mol/L NaOH solution before adsorption. Pretreatment of biomass with NaOH further increased its biosorption capacity.
文摘Kinetics and mechanisms on the removal of aqueous lead ion by carbonate hydroxyapatite （CHap） are investigated in the present work. Experimental results show that, in the whole pH range, the lead removal percentage increases with decreasing pH values and reaches a maximum at pH=2-3. Under some conditions, the lead residual concentration is below national integrated wastewater discharge standard, even drinking water standard. The removal behavior is a complicated non-homogeneous solid/liquid reaction, which can be described by two stages from kinetic point of view. At the earlier stage, reaction rate is so fast that its kinetic course is intricate, which requires further study. At the latter stage, the rate of reaction becomes slow and the process of reaction accords with one order reaction kinetic equation. Experimental results show that the relationship between reaction rate constant k1 and temperature T accords to Arrhenius Equation, and the activation energy of sorption （Ea） is 11.93 kJ/mol and frequency factor （A） is 2.51 s^-1. X-ray diffraction （XRD）, scanning electron microscopy with an energy dispersive X-ray fluoresence spectrometer （SEM-EDS） and toxicity characteristic leaching procedure （TCLP） test were conducted in this work. It is indicated that the main mechanism is dissolution-precipitation, accompanying with superficial sorption.
文摘The objective of this study is to develop carbon, that of <i></span><i><span style="font-family:Verdana;">Acacia auriculeaformis</span></i><span style="font-family:Verdana;"></i></span><span style="font-family:Verdana;"> through its activation in order to eliminate lead in an aqueous medium. A series of activated carbon has been prepared by chemical activation with phosphoric acid, sodium hydroxide and sodium chloride. The determi</span><span style="font-family:Verdana;">nation of the physico-chemical properties of the prepared carbon guided the choice of phosphoric acid activated carbon as the best adsorbent for the</span><span style="font-family:Verdana;"> elimination of lead(II) in </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">an </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">aqueous solution. Pb</span><sup><span style="font-family:Verdana;">2+</span></sup><span style="font-family:Verdana;"> adsorption tests in batch mode have shown that the adsorption capacity is influenced by various parameters such as mass, pH, concentration of Pb<sup>2+</sup> ions and contact time linked to the medium and the adsorbent. Adsorption isotherms, kinetic models and thermodynamics have been used to describe the adsorption process. The equilibrium data for activated charcoal correspond well to the model of Freundlich, </span><span style="font-family:Verdana;">Langmuir, Temkin and Kiselev. The kinetic adsorption data proved to be </span><span style="font-family:Verdana;">better described by the pseudo-second order model with </span><span style="font-family:Verdana;">external and intraparticle diffusion which are two decisive steps in the</span><span style="font-family:Verdana;"> adsorption process of Pb<sup>2+</sup> ions. Thermodynamics and adsorption isotherms predict a spontaneous exothermic surface reaction, of the chemisorption type, with ion </span><span><span style="font-family:Verdana;">retention in orderly monolayers on the heterogeneous surface of the adsorbent. Tests carried out with this adsorbent material have contributed to the elimination of the Pb</span><sup><span style="font-family:Verdana;">2+</span></sup><span style="font-family:Verdana;"> ions contained in an industrial effluent with a </span></span><span style="font-family:Verdana;">reduction rate reaching 42.52% against 85.90% in a synthetic solution.
基金supports from the National Science Foundations of China (Nos. 20875076 and 21005061)the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20096101120011)+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China (No.2010JQ2013)the Education Department of Shaanxi Province,China (No. 09JK759)the NWU Graduate Innovation and Creativity Funds (No. 09YSY04)
文摘An electrochemical sensor incorporating a signal enhancement for the determination of lead （II） ions （Pb2＋） was designed on the basis of the thrombin-binding aptamer （TBA） as a molecular recog- nition element and ionic liquid supported cerium oxide （CeO2） nanoparticles-carbon nanotubes compo- site modification. The composite comprises nanoparticles CeO2, multi-waU carbon nanotubes （MWNTs） and hydrophobic room temperature ionic liquid （RTIL） 1-ethyl-3-methylimidazolium tetrafluoroborate （EMIMBF4）. The electrochemical sensors were fabricated by immersing the CeOa-MWNTs-EMIMBF4 modified glassy carbon electrode （GCE） into the solution of TBA probe. In the presence of Pb2＋, the TBA probe could form stable G-quartet structure by the specific binding interactions between Pb2＋ and TBA. The TBA-bound Pb2＋ can be electrochemically reduced, which provides a readout signal for quantitative detection of Pb2＋. The reduction peak current is linearly related to the concentration of Pb2＋ from 1.0 ＊ 10-8 M to 1.0 ＊ 105 M with a detection limit of 5 ＊ 109 M. This work demonstrates that the CeOz-MWNTs-EMIMBF4 nanocomposite modified GCE provides a promising platform for immobi- lizing the TBA probe and enhancing the sensitivity of the DNA-based sensors.
基金Supported by the National Natural Science Foundation of China(Nos.51102047&51472050)
文摘Al（OH）_3 modified nickel slag adsorbent was prepared by sintering technology. The structure of the sample was characterized by BET, XRD, IR, SEM and EDAX. The sample＇s adsorption performance of Pb^（2＋） and Cu^（2＋） from aqueous solution was studied. Results indicated that the adsorbent is a loose and porous mesoporous material. Its surface had mass aluminosilicate, high-activity γ-Al_2O_3 and its p H ranges from 4 to 12 that all have negative charges. The BET surface of the adsorbent is 23.90 m^2/g. Furthermore, its surface contains rich oxygenic functional groups, which could not only provide abundant adsorption sites for Pb^（2＋） and Cu^（2＋）, but also improve the adsorption performance of Pb^（2＋） and Cu^（2＋） from waste water through the complexation of heavy metal ions. The best p H values selected in the adsorption of Pb^（2＋） and Cu^（2＋） are 6 and 5, respectively. With the increase of the initial concentration of simulated solution, the adsorption capacities of Pb^（2＋） and Cu^（2＋） gradually increased but the removal rates showed a downward trend. The competitive adsorption results of Pb^（2＋） and Cu^（2＋） showed that Pb^（2＋） has better preferential adsorption than Cu^（2＋）.
基金Supported by the National Natural Science Foundation of China(Nos.51472050,51402295 and 51672046)
文摘Desulphurization slag modified nickel slag adsorbent was prepared by unburned forming technology. The structure of the sample was characterized by BET,XRD,IR,SEM and EDAX. The adsorption performance of Pb^2＋ and Cu^2＋ onto the resultant adsorbent from aqueous solution was studied. Results indicated that the adsorbent possesses a network pore structure formed by the AFt and C–S–H through cross lapping; the adsorbent contains a large number of Si–OH and Al–OH functional groups. The presence of functional groups not only provides abundant adsorption sites for Pb^2＋ and Cu^2＋,but also improves the adsorption performance of Pb^2＋ and Cu^2＋ from waste water through the complexation of heavy metal ions. The result of specific surface area analysis showed that the adsorbent sample possesses mesoporous structure and the BET specific surface area is 27.15 m^2/g. The solution p H values for the adsorption of Pb^2＋ and Cu^2＋ were optimized to be 6 and 5.5,respectively. The adsorption capacities of Pb^2＋ and Cu^2＋ gradually increase,whereas the removal rates of the two metal ions decrease with increasing the initial concentration of simulated solution. The resultant adsorbent gives a higher adsorption capacity for Cu^2＋ than for Pb^2＋ in the single ion solution. However,it shows preferential adsorption of Pb^2＋ rather than that of Cu^2＋. Meanwhile,results of recyclability indicate the remarkable regeneration capacity,re-adsorption ability and reusability performance of the adsorbent sample.
基金supported by the National Natural Science Foundation of China (No. 41072173)the National Science & Technology Pillar Program in the Eleventh Five-year Plan Period of China (No. 2006BAJ04A07)
文摘A novel ion-imprinted polymer, lead ion-imprinted micro-beads with combination of two functional monomers, was synthesized using the W/O/W polymerization method. Two functional monomers, 1,12-dodecanediol-O,O’-diphenyl-phosphonic acid （DDDPA） and 4-vinylpyridine, were used to form a suitable construction with micro-pores fitting the template and recognition sites. The eflects of adsorbent dosage, solution pH and the competitive ions on the adsorption and separation eflciency of lead ions were investigated. The lead ion-imprinted micro-beads were eflcient for lead ions removal from aqueous solution in a broad pH range （4–9）, when the adsorbent dosage was above 0.1 g/L. The adsorption process obeyed the pseudo second-order kinetics model and it only took half an hour to reach the equilibrium. The adsorption isotherm of lead ion was described by the Langmuir model （R2 0.99） with a maximum adsorption capacity of 116.9 mg/g. In the presence of competitive ions Co2＋ and Cd2＋, the lead ion-imprinted micro-beads showed a high selectivity for lead ions. The selectivity coeficient of Pb2＋/Cd2＋ and Pb2＋/Co2＋are 99.3 and 114.7, respectively.
文摘A new glassy carbon electrode modified with novel caHx[4]arene derivative was prepared and then applied to the selective recognition of lead ion in aqueous media by cyclic and square wave voltammtry. A new anodic stripping peak at - 0.92 V (vs. Ag/Ag+) in square wave voltammogram can be obtained by scanning the potential from - 1.5 to - 0.6 V, of which the peak current is proportional to the concentration of Pb2+. The modified electrode in 0.1 moVL HNO3 solution showed a linear voltammetric response in the range of 2.0 x 10(-8)-1.0 x 10(-6) mol/L and a detection limit of 6.1 x 10(-9) mol/L. In the modified glassy carbon electrode no significant interference occurred from alkali, alkaline and transition metal ions except Hg2+, Ag+ and Cu2+ ions, which can be eliminated by the addition of KSCN. The proposed method was successfully applied to determine lead in aqueous samples.
文摘Direct mixture of Au^3＋ with glutathione （GSH）, which act as both reduction agents and stabilizers, in aqueous solution gave rise to production of gold nanoparticles （Au NPs） with uniform sizes of around 21 nm. The GSH stabilizer Au NPs in solution show immediate aggregation after addition of 1 mol/L NaCI aqueous solution containing Pb^2＋ ions. The Pb^2＋-induced aggregation in Au NP solution is monitored by both colorimetric response and UV-vis spectroscopy. A rather broad linear range （from 0.1 to 30 pmol/L） and low detection limit （0.1 pmol/L） are explored for Au NP sensors used for detection of Pb^2＋ ions. Furthermore, the response of GSH-stabilized Au NPs toward Pb^2＋ ions is specific compared with other possible interferants （Hg^2＋, Mg^2＋, Zn^2＋, Ni^2＋, Cu^2＋, Co^2＋, Ca^2＋, Mn^2＋, Cd^2＋, and Ba^2＋）.
基金supported by the National Natural Science Foundation of China(21064006 and 21161018)the Natural Science Foundation of Gansu Province(1010RJZA018)the Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China(IRT1177)
文摘A series of novel and simple ligands based on a biscarboxyl-functionalized benzimidazole derivative were synthesized.The experiments showed that the ligand L2 as a low molecular weight(LMW) hydrogelator could form stable metallo-hydrogels in the presence of up to 0.3 equiv.of lead ions.The metallo-hydrogels were characterized using powder X-ray diffraction,scanning electron microscopy(SEM),and Fourier transform infrared(FT-IR) spectroscopic techniques.When the molar ratio of L2:Pb2+ was in the range of 1:0.3 to 1:0.5 a translucent gel was produced.When the L2:Pb2+ molar ratio was higher than 1:0.5 the resulting gel tended to be opaque.The morphologies of these metallo-hydrogels were L2/Pb ratio dependent,ranging from worm-like to rod-shaped and nanofibrous.The FT-IR and X-ray diffraction(XRD) studies revealed that L2-Pb complexation was the main driving force for the formation of the metallo-hydrogels.In addition,these metallo-hydrogels exhibited outstanding thermostability and thermoreversibility,and displayed a reversible sol-gel transition induced by changes in pH and EDTA concentration.Importantly,ligand L2 showed an excellent capacity for the removal of Pb 2+ in aqueous solution through the formation of metallo-hydrogels.At a L2:Pb molar ratio of 1:0.5 and below,the concentration of residual Pb2+ was as low as 7.6×10-5 mol/L in aqueous solution,and the removal ratio was as high as 95.4%.These results demonstrate that multi-channel responsive smart metallo-hydrogels have the potential to be widely applied in materials science,and might provide the basis for lead pollution capture and removal.
基金the National Key Research and Development Program of China (No.2018YFC1602905)the National Natural Science Foundation of China (Nos.61871180 and 61527806)+1 种基金the Natural Science Foundation of Hunan Province (No.2017JJ2069)Hunan Key Research Project (No.2017SK2174) for the financial supports
文摘An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode(nano-PPCPE)has been successfully developed,and used to detect Cd^2+ and Pb^2+.The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode(GCE)and pure carbon paste electrode(CPE).Then the prepared nano-PPCPE was applied to detect Cd^2+ and Pb^2+in standard solution,the results showed that the electrodes can quantitatively detect trace Cd^2+ and Pb^2+,which has great significance in electrochemical analysis and detection.The linear ranges between the target ions concentration and the D PASV current were from 0.1-3.0 μmol/L,0.05-4.0 μmol/L for Cd^2+ and Pb^2+,respectively.And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L,respectively.Moreover,the preparation of the nano-PPCPE is cheap,simple and has important practical value.
基金financially supported by the National Natural Science Foundation of China (No.21377063)K.C.Wong Magna Fund in Ningbo University
文摘Highly crystalline β-type strontium hydrogen phosphate （β-SrHPO4） nanosheets were prepared by a hydro- thermal method and used for the immobilization of lead ions （Pb2＋） from acidic aqueous solution. The effects of various parameters on the immobilization process, including solution pH value, contact time, initial ion concentrations, and coexistent competing cations, were studied to optimize the conditions for maximum immobilization. The β-SrHPO4 nanosheets exhibited a capacity of （1,120 ± 22） mg/g toward Pb2＋ in acidic solution （pH value is 3.0）, and the equilibrium was achieved within 8 rain. The competing cations such as Cu2＋, Zn2＋, Cd2＋, and Co2＋ affected slightly on the selective immobilization of Pb2＋. The results revealed that the removal mechanism of Pb2＋ by the β-SrHPO4 nanosheets was the dissolution/precipitation process in the acidic solution.
基金supported by the National Natural Science Foundation of China(21005026 and 21135001)the National Basic Research Program of China(2011CB911000)the Foundation for Innovative Research Groups of NSFC(21221003)
文摘In this paper,we proposed a facile and accurate way for controlling multiplex fluorescent logic gates through changing the exciting and the observing wavelengths.As proof-of-principle,a Pb2+-specific DNAzyme probe and a thymine(T)-rich DNA probe were introduced to a double-stranded(ds-)DNA.The addition style of the two ions served as the four inputs by changing the distance of the three fluorophores,6-carboxyfluorescein(FAM),ALEXA 532(ALEXA)and carboxytetramethylrhodamine(TAMRA),all of which were modified on the dsDNA probe.Compared with the previous methods,the present approach needed neither different inputs nor the change of sequence of the probe to achieve multiplex logic gates.Furthermore,the modularity of the strategy may allow it to be extended to other types of logic gates.
基金Financial support was provided by the National Natural Science Foundation of China （No. 21675016）, Chongqing Basic and Frontier Research Program （No. cstc2016jcyjA0328）, and the 100 Young Plan by Chongqing University （No. 0236011104410）.
文摘A new type of self-targeting carbon dot （CD-Fla） for the detection of the toxic heavy metal ion Pb^2＋ was synthesized via a one-pot hydrothermal route using flavonoid extracts of Ginkgo biloba leaves as the starting material. As-prepared CD-Fla exhibited excellent biocompatibility and strong blue emission with a quantum yield of 16.1% and significant fluorescence quenching selectivity for Pb^2＋ without using any additional targeting molecules. CD-Fla could detect Pb^2＋ quantitatively within the range 0.1-20.0 nM, with an ultrahigh sensitivity of 55 pM. The selectivity of CD-FIa for Pb^2＋ was nearly one order of magnitude higher than that for other relevant metal ions. This was much better than ever reported CD-based metal ion sensors. The high sensitivity and selectivity were due to the incorporation of certain flavonoid-like moieties into CD-Fla. CD-Fla was also demonstrated to be a good probe for fluorescence tracing of intracellular Pb^2＋. The capability of CD-Fla was further improved when it was doped on agarose hydrogel. CD-Fla-doped agarose hydrogel （CD-AHG） allowed for visual fluorescence detection and removal of Pb^2＋ from water. This was confirmed by testing CD-AHG in actual water samples taken from the Jialing River （Chongqing, China）. The Pb^2＋ adsorbed CD-AHG was regenerable in HC1 solution. This study will open a new avenue for synthesizing intelligent materials capable of simultaneously targeting, detecting, and treating heavy metal ions.
