With the aim of controlling the problem of fine particles in the flue gas of lead-zinc smelting,a low-temperature plasma-electrocoagulation and electric bag composite dedusting experimental platform was designed by co...With the aim of controlling the problem of fine particles in the flue gas of lead-zinc smelting,a low-temperature plasma-electrocoagulation and electric bag composite dedusting experimental platform was designed by combining electrocoagulation and electric bag composite dust removal technology based on the research of low-temperature plasma technology.Firstly,the properties of fine particles in flue gas from lead-zinc smelting were analyzed,and the effects of input voltage,filter wind speed,dust concentration,and pulse-jet ash-cleaning cycle on the dust collection efficiency of the integrated device were studied.Then,the energy efficiency of the integrated technology was analyzed,and the control mechanism of the fine particles was revealed.The experimental results show that the integrated technology of low-temperature plasma-electrocoagulation and electric bag composite dust removal achieves a fine particle removal efficiency of more than 99.99%and the energy consumption per unit mass of the dust is only 0.008 k W·h/g.The integrated technology has broad application prospects and farreaching practical significance for the lead-zinc smelting industry to achieve ultra-low emission targets for flue gas and achieve energy-saving and emission reduction effects.展开更多
The variation characteristics of bubble morphology and the thermal-physical properties of bubble boundary in the top-blown smelting furnace were explored by means of the computational fluid dynamics method.The essenti...The variation characteristics of bubble morphology and the thermal-physical properties of bubble boundary in the top-blown smelting furnace were explored by means of the computational fluid dynamics method.The essential aspects of the fluid phase(e.g.,splashing volume,dead zone of copper slag,and gas penetration depth)were explored together with the effect of sinusoidal pulsating gas intake on the momentum-transfer performance between phases.The results illustrated that two relatively larger vortices and two smaller vortices appear in the bubble waist and below the lance,respectively.The expansion of larger ones as well as the shrinking of smaller ones combine to cause the contraction of the bubble waist.Compared to the results of the case with a fixed gas injection velocity(V_(g)=58 m/s),the splashing volume and dead zone volume of the slag under the V_(g)=58+10sin(2πt)condition are reduced by 24.9%and 23.5%,respectively,where t represents the instant time.Gas penetration depth and slag motion velocity of the latter are 1.03 and 1.31 times high-er than those of the former,respectively.展开更多
Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This...Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.展开更多
A demonstration project of the major scientific and technological project in Inner Mongolia Autonomous Region-"Industrialization Test of New Green Smelting Technology for Rare Earth Concentrate produced from Baiy...A demonstration project of the major scientific and technological project in Inner Mongolia Autonomous Region-"Industrialization Test of New Green Smelting Technology for Rare Earth Concentrate produced from Baiyun Obo ore"was commissioned on November 20th.This project adopts the"new green smelting process for rare earth concentrate"independently developed by China Northern Rare Earth Group(CNREG),and has achieved a new breakthrough in rare earth smelting technology.展开更多
A computer model has been developed to simulate the distribution behaviors of Ni, Co. Sn. Ph,Zn, As, Sb, Bi, An and Ag in copper smelting process. The model assumes that the copper smelting furnaceis in thermodynamic ...A computer model has been developed to simulate the distribution behaviors of Ni, Co. Sn. Ph,Zn, As, Sb, Bi, An and Ag in copper smelting process. The model assumes that the copper smelting furnaceis in thermodynamic equilibrium. As many as 21 elements (Cu. S, Fe. Ni, Co. Sn, As, Sb. Bi, Ph. Zn.An. Ag. O, N, C, H, Ca, Mg, Al, and St) and 73 compounds are considered. This model accounts forphysical entrainment in the melts. The predictions by the present computer model are compared with theknown commercial data from Guixi Smelter in China, Home Smelter in Canada and Naoshima Smelter inJapan. The agreements between the computer predictions and the commercial data are excellent, so that thepresent computer model can be used to monitor and optimize the actual industrial operations of copper smelting. It is applicable to simulation of almost all copper pyrometallurgical processes.展开更多
Lead extraction from spent lead–acid battery paste in a molten Na2CO3 salt containing Zn O as a sulfur-fixing agent was studied. Some influencing factors, including smelting temperature, reaction time, Zn O and salt ...Lead extraction from spent lead–acid battery paste in a molten Na2CO3 salt containing Zn O as a sulfur-fixing agent was studied. Some influencing factors, including smelting temperature, reaction time, Zn O and salt dosages, were investigated in detail using single-factor experiments. The optimum conditions were determined as follows: T = 880°C; t = 60 min; Na2CO3/paste mass ratio = 2.8:1; and the Zn O dosage is equal to the stoichiometric requirement. Under the optimum conditions, the direct recovery rate of lead reached 98.14%. The results suggested that increases in temperature and salt dosage improved the direct recovery rate of lead. XRD results and thermodynamic calculations indicated that the reaction approaches of lead and sulfur were Pb SO4→Pb and Pb SO4→Zn S, respectively. Sulfur was fixed in the form of Zn S, whereas the molten salt did not react with other components, serving only as a reaction medium.展开更多
CuCr alloys are important contact materials, but all conventional preparing methods have disadvantages and mismatch the requirements for mass production and high properties. The CuCr25 alloys were prepared by means of...CuCr alloys are important contact materials, but all conventional preparing methods have disadvantages and mismatch the requirements for mass production and high properties. The CuCr25 alloys were prepared by means of arc smelting in vacuum, and their microstructures, physical properties as well as dielectric strength were investigated. The experimental results show that vacuum arc smelting is an ideal method to produce CuCr25 contact alloys with fine microstructure, low gas content, high density and dielectric strength. Meanwhile, with the high productivity and low cost, CuCr25 contact materials can be produced with mass production through vacuum arc smelting method.展开更多
As to solve the online monitoring of the inner temperatur e and freezing profile of the reaction shaft of flash smelting furnace, simulation of the wall in the reaction shaft in a flash smelting furnace was made throu...As to solve the online monitoring of the inner temperatur e and freezing profile of the reaction shaft of flash smelting furnace, simulation of the wall in the reaction shaft in a flash smelting furnace was made through numerical computation. The computational results are very near the data got in s ite. The error of the moving boundary is approximately 3%, and that of the tempe rature is less than 5%. It is proved that the simulation software is applicable for practice to monitor the temperature and moving boundary inside the hearth on line. Based on a large number of the data computed, the relation between the cha nge of the moving boundary and inner temperature is summarized, and the great in fluence of the cooling system on the forming and stability of the moving boundar y inside the hearth is emphasized, which provide the theoretical bases for optim izing the flash smelting operation.展开更多
A novel low-temperature alkaline smelting process is proposed to convert and separate amphoteric metals in crushed metal enrichment originated from waste printed circuit boards. The central composite design was used t...A novel low-temperature alkaline smelting process is proposed to convert and separate amphoteric metals in crushed metal enrichment originated from waste printed circuit boards. The central composite design was used to optimize the operating parameters,in which mass ratio of Na OH-to-CME, smelting temperature and smelting time were chosen as the variables, and the conversions of amphoteric metals tin, lead, aluminum and zinc were response parameters. Second-order polynomial models of high significance and3 D response surface plots were constructed to show the relationship between the responses and the variables. Optimum area of80%-85% Pb conversion and over 95% Sn conversion was obtained by the overlaid contours at mass ratio of Na OH-to-CME of4.5-5.0, smelting temperature of 653-723 K, smelting time of 90-120 min. The models were validated experimentally in the optimum area, and the results demonstrate that these models are reliable and accurate in predicting the smelting process.展开更多
In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research resu...In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research results concerning the relationship between the Cu content of the matte and slag in the SKS process; the results are based on actual industrial production in the Dongying Fangyuan copper smelter. The results show that the matte grade strongly influences Cu losses in slag. The dissolved and entrained losses account for 10%–20% and 80%–90% of the total SKS industrial Cu losses in slag, respectively. With increasing matte grade, the dissolved and entrained Cu losses in the SKS slag both increase continuously. When the matte grade is greater than 68%, the content of Cu in the smelting slag increases much more dramatically. To obtain a high direct recovery of copper, the matte grade should be less than 75% in industrial SKS copper production.展开更多
The solution behavior, including solubility, reactivity and sedimentation, of ZnO and ZnS in a Na_2CO_3-NaCl molten salt used for Sb smelting was investigated in the temperature range of 700-1000 oC. The saturated amo...The solution behavior, including solubility, reactivity and sedimentation, of ZnO and ZnS in a Na_2CO_3-NaCl molten salt used for Sb smelting was investigated in the temperature range of 700-1000 oC. The saturated amount of dissolved ZnO in the molten salt remained constant at 0.02% and was unaffected by temperature; additionally, ZnO did not react with the molten salt. In contrast, the saturated amount of dissolved ZnS in the eutectic molten salt increased with increasing temperature, and the content of ZnS was 0.53% at 1000 oC. In addition, ZnS reacted with Na_2CO_3 above 900 oC to give ZnO. The sedimentation rates of these three species in the molten salt followed the order of Sb>ZnS>ZnO. It was thus concluded that ZnO is an appropriate sulfur-fixing agent for low-temperature Sb smelting in a Na_2CO_3-NaCl molten medium, and that the optimal smelting temperature is below 900 oC.展开更多
The effect of diboron trioxide(B_2O_3) on the crushing strength and smelting mechanism of high-chromium vanadium–titanium magnetite pellets was investigated in this work. The main characterization methods were X-ray ...The effect of diboron trioxide(B_2O_3) on the crushing strength and smelting mechanism of high-chromium vanadium–titanium magnetite pellets was investigated in this work. The main characterization methods were X-ray fluorescence, inductively coupled plasma–atomic emission spectroscopy, mercury injection porosimetry, X-ray diffraction, metallographic microscopy, and scanning electron microscopy–energy-dispersive X-ray spectroscopy. The results showed that the crushing strength increased greatly with increasing B_2O_3 content and that the increase in crushing strength was strongly correlated with a decrease in porosity, the formation of liquid phases, and the growth and recrystallization consolidation of hematite crystalline grains. The smelting properties were measured under simulated blast furnace conditions; the results showed that the smelting properties within a certain B_2O_3 content range were improved and optimized except in the softening stage. The valuable element B was easily transformed to the slag, and this phenomenon became increasingly evident with increasing B_2O_3 content. The formation of Ti(C,N) was mostly avoided, and the slag and melted iron were separated well during smelting with the addition of B_2O_3. The size increase of the melted iron was consistent with the gradual optimization of the dripping characteristics with increasing B_2O_3 content.展开更多
The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO...The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO_2 and MgO in copper concentrate;output layer includes three nodes:matte grade,matte temperature and Fe/SiO_2 in slag,and net structure was 8-13-10-3.Then,the internal relationship between the technological parameters and the objective parameters was built after the CFSPNNM was trained by us...展开更多
Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and subs...Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and substitution method, the environmental impacts of co-products were allocated among the main products of zinc, lead and sulfuric acid. The related impacts were assessed by use of Global Warming Potential （GWP） and Acidification Potential （ACP）. The results show that the GWP index from 1998 to 2000 is 11.53, 11.65, 10.93 tCO2-eq/tZn respectively, the ACP index decreases from 14.88 kgSO2-eq/tZn in 1998 to 10.99 kgSO2-eq/tZn in 2000. Power and electricity generation, followed by smelting and zinc distillation, are mainly responsible for GWP. Sintering individually affects ACP. Reduction in greenhouse gas emissions of the ISP may come from energy conservation measures rather than from technological developments. And recycling more secondary Pb and Zn materials effectively treated by ISP, and reducing the amount of primary metal are the main ways to put SO2 emission under control.展开更多
A computer model has been developed to simulate the nickel smelting process. The primary assumption of the model is that six phases in the nickel smelting furnace are in chemical equilibrium. The amounts of all compon...A computer model has been developed to simulate the nickel smelting process. The primary assumption of the model is that six phases in the nickel smelting furnace are in chemical equilibrium. The amounts of all components in matte, slag and gaseous phases under equilibrium are calculated by using the data of free energies of formation and activity coefficients of components. Two nickel sulfide species are used to allow for the modeling of sulfur-deficient mattes. The predictions by the present computer model are compared with the known data from Kalgoorlie nickel flash smelting. The agreements between the computer predictions and the known data are excellent,so that the present computer model can be used to monitor and optimize the actual industrial operations of nickel smelting process. The distribution behaviors of Ni, Co, Cu, Fe, S and O in the nickel smelting furnace are basically dependent on the process factors such as smelting temperature, volumes of air, and the element content.展开更多
Reduction rate of ferrous oxide in smelting reduction with iron bath has been studied.The main affecting factors on reduction rate,such as composition of the melt,temperature of molten bath,basicity of slag and the wa...Reduction rate of ferrous oxide in smelting reduction with iron bath has been studied.The main affecting factors on reduction rate,such as composition of the melt,temperature of molten bath,basicity of slag and the way of supplying carbonaceous materials have also been investigated.展开更多
A field survey was conducted to investigate the metal and arsenic contamination in soils and vegetables on four villages (Shuichuan (SCH), Beiwan (BWA), Dongwan (DWA) and Wufe (WFE)) located along, Baiyin, China, and ...A field survey was conducted to investigate the metal and arsenic contamination in soils and vegetables on four villages (Shuichuan (SCH), Beiwan (BWA), Dongwan (DWA) and Wufe (WFE)) located along, Baiyin, China, and to evaluate the possible health risks to local population through foodchain. Results show that the most significantly contaminated soils occurred upstream at SCH where Cd, Cu and As concentrations exceeded maximum allowable concentrations for Chinese agricultural soil. Further downstream the degree of contamination semi-systematically decreased in concentrations of metal. Generally, the leafy vegetables were more heavily contaminated than non-leafy vegetables. Chinese cabbage is the most severely contaminated, the concentrations of Cd exceeded the maximum permit levels (0.05 mg/kg) by 4.5 times. Bio-accumulate factor also shows that an entry of Cd to food chain plants is the greatest potential. Furthermore, the estimated daily intake amounts of the considered toxic elements (Cd, Pb and Cu) from the vegetables grown at SCH and BWA and DWA have exceeded the recommended dietary allowance levels. Thus, the vegetables grown in three villages above, which affected by Baiyin mining and smelting have a health hazard for human consumption.展开更多
Compost has been used to stabilise lead (Pb) in soil. However, compost contains a high level of dissolved organic matter (DOM) which may make Pb bioavailable in plant and thereby limiting its effectiveness and applica...Compost has been used to stabilise lead (Pb) in soil. However, compost contains a high level of dissolved organic matter (DOM) which may make Pb bioavailable in plant and thereby limiting its effectiveness and application. Addition of biochar to compost can reduce this effect. Rice husk (RH) and Cashew nut shell (CNS) biochars and compost-modified biochars were used in comparison to compost for stabilizing Pb in lead smelting slag (LSS)-contaminated soil (Pb = 18,300 mg/kg) in Nigeria. Efficiency of Pb stabilisation in control and amended soils was assessed using CaCl2 batch leaching experiment and plant performance. In pot experiments, maize plant was grown on the contaminated soil and on soil treated with minimum and optimum doses of the amendments singly and in combination for 6 weeks. Agronomical and chemical parameters of the plants were measured. CaCl2-extractable Pb in the untreated soil was reduced from 60 mg/kg to 0.55 mg/kg in RHB amended soils and non-detectable in other amended soils. RH-biochar/compost increased plant height, number of leaf and leaf area more than the others. Similarly, at minimum rate, it reduced root and shoot Pb by 91% and 86.0% respectively. Compost-modified rice husk biocharstabilised Pb in lead smelting slag contaminated soil reduced Pb plant uptake and improved plant growth. Lead stabilisation through the use of rice husk biochar with compost may be a green method for remediation of lead smelting slag-contaminated soil.展开更多
基金supported by the State Key Laboratory of Organic Geochemistry,GIGCAS(No.SKLOG-201909)the Fundamental Research Funds for the Central Universities(2009QH03)funded by the Open Foundation of Shaanxi Key Laboratory of Lacustrine Shale Gas Accumulation and Exploitation(under planning).
文摘With the aim of controlling the problem of fine particles in the flue gas of lead-zinc smelting,a low-temperature plasma-electrocoagulation and electric bag composite dedusting experimental platform was designed by combining electrocoagulation and electric bag composite dust removal technology based on the research of low-temperature plasma technology.Firstly,the properties of fine particles in flue gas from lead-zinc smelting were analyzed,and the effects of input voltage,filter wind speed,dust concentration,and pulse-jet ash-cleaning cycle on the dust collection efficiency of the integrated device were studied.Then,the energy efficiency of the integrated technology was analyzed,and the control mechanism of the fine particles was revealed.The experimental results show that the integrated technology of low-temperature plasma-electrocoagulation and electric bag composite dust removal achieves a fine particle removal efficiency of more than 99.99%and the energy consumption per unit mass of the dust is only 0.008 k W·h/g.The integrated technology has broad application prospects and farreaching practical significance for the lead-zinc smelting industry to achieve ultra-low emission targets for flue gas and achieve energy-saving and emission reduction effects.
基金the Applied Basic Research Project of Yunnan Province,China(No.202301 AT070411).
文摘The variation characteristics of bubble morphology and the thermal-physical properties of bubble boundary in the top-blown smelting furnace were explored by means of the computational fluid dynamics method.The essential aspects of the fluid phase(e.g.,splashing volume,dead zone of copper slag,and gas penetration depth)were explored together with the effect of sinusoidal pulsating gas intake on the momentum-transfer performance between phases.The results illustrated that two relatively larger vortices and two smaller vortices appear in the bubble waist and below the lance,respectively.The expansion of larger ones as well as the shrinking of smaller ones combine to cause the contraction of the bubble waist.Compared to the results of the case with a fixed gas injection velocity(V_(g)=58 m/s),the splashing volume and dead zone volume of the slag under the V_(g)=58+10sin(2πt)condition are reduced by 24.9%and 23.5%,respectively,where t represents the instant time.Gas penetration depth and slag motion velocity of the latter are 1.03 and 1.31 times high-er than those of the former,respectively.
基金financially supported by the National Natural Science Foundation of China(Nos.52174217 and 52304354)the China Postdoctoral Science Foundation(No.2020M682495)。
文摘Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.
文摘A demonstration project of the major scientific and technological project in Inner Mongolia Autonomous Region-"Industrialization Test of New Green Smelting Technology for Rare Earth Concentrate produced from Baiyun Obo ore"was commissioned on November 20th.This project adopts the"new green smelting process for rare earth concentrate"independently developed by China Northern Rare Earth Group(CNREG),and has achieved a new breakthrough in rare earth smelting technology.
文摘A computer model has been developed to simulate the distribution behaviors of Ni, Co. Sn. Ph,Zn, As, Sb, Bi, An and Ag in copper smelting process. The model assumes that the copper smelting furnaceis in thermodynamic equilibrium. As many as 21 elements (Cu. S, Fe. Ni, Co. Sn, As, Sb. Bi, Ph. Zn.An. Ag. O, N, C, H, Ca, Mg, Al, and St) and 73 compounds are considered. This model accounts forphysical entrainment in the melts. The predictions by the present computer model are compared with theknown commercial data from Guixi Smelter in China, Home Smelter in Canada and Naoshima Smelter inJapan. The agreements between the computer predictions and the commercial data are excellent, so that thepresent computer model can be used to monitor and optimize the actual industrial operations of copper smelting. It is applicable to simulation of almost all copper pyrometallurgical processes.
基金financially supported by the National Nature Science Foundation of China (Nos. 51234009 and 51104182)the Natural Science Foundation of Hunan Province, China (No. 13JJ5035)the Scientific Research Fund of Hunan Provincial Education Department, China (No. 14C0349)
文摘Lead extraction from spent lead–acid battery paste in a molten Na2CO3 salt containing Zn O as a sulfur-fixing agent was studied. Some influencing factors, including smelting temperature, reaction time, Zn O and salt dosages, were investigated in detail using single-factor experiments. The optimum conditions were determined as follows: T = 880°C; t = 60 min; Na2CO3/paste mass ratio = 2.8:1; and the Zn O dosage is equal to the stoichiometric requirement. Under the optimum conditions, the direct recovery rate of lead reached 98.14%. The results suggested that increases in temperature and salt dosage improved the direct recovery rate of lead. XRD results and thermodynamic calculations indicated that the reaction approaches of lead and sulfur were Pb SO4→Pb and Pb SO4→Zn S, respectively. Sulfur was fixed in the form of Zn S, whereas the molten salt did not react with other components, serving only as a reaction medium.
文摘CuCr alloys are important contact materials, but all conventional preparing methods have disadvantages and mismatch the requirements for mass production and high properties. The CuCr25 alloys were prepared by means of arc smelting in vacuum, and their microstructures, physical properties as well as dielectric strength were investigated. The experimental results show that vacuum arc smelting is an ideal method to produce CuCr25 contact alloys with fine microstructure, low gas content, high density and dielectric strength. Meanwhile, with the high productivity and low cost, CuCr25 contact materials can be produced with mass production through vacuum arc smelting method.
文摘As to solve the online monitoring of the inner temperatur e and freezing profile of the reaction shaft of flash smelting furnace, simulation of the wall in the reaction shaft in a flash smelting furnace was made through numerical computation. The computational results are very near the data got in s ite. The error of the moving boundary is approximately 3%, and that of the tempe rature is less than 5%. It is proved that the simulation software is applicable for practice to monitor the temperature and moving boundary inside the hearth on line. Based on a large number of the data computed, the relation between the cha nge of the moving boundary and inner temperature is summarized, and the great in fluence of the cooling system on the forming and stability of the moving boundar y inside the hearth is emphasized, which provide the theoretical bases for optim izing the flash smelting operation.
基金Projects(51074190,51234009)supported by the National Natural Science Foundation of ChinaProject(2014DFA90520)supported by International Cooperation Program of Ministry of Science of ChinaProject(20110162110049)supported by the Doctoral Scientific Fund Project of the Ministry of Education of China
文摘A novel low-temperature alkaline smelting process is proposed to convert and separate amphoteric metals in crushed metal enrichment originated from waste printed circuit boards. The central composite design was used to optimize the operating parameters,in which mass ratio of Na OH-to-CME, smelting temperature and smelting time were chosen as the variables, and the conversions of amphoteric metals tin, lead, aluminum and zinc were response parameters. Second-order polynomial models of high significance and3 D response surface plots were constructed to show the relationship between the responses and the variables. Optimum area of80%-85% Pb conversion and over 95% Sn conversion was obtained by the overlaid contours at mass ratio of Na OH-to-CME of4.5-5.0, smelting temperature of 653-723 K, smelting time of 90-120 min. The models were validated experimentally in the optimum area, and the results demonstrate that these models are reliable and accurate in predicting the smelting process.
基金financially supported by the National Natural Science Foundation of China (No. 51620105013)Dongying Fangyuan Nonferrous Metals Co., Ltd.
文摘In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research results concerning the relationship between the Cu content of the matte and slag in the SKS process; the results are based on actual industrial production in the Dongying Fangyuan copper smelter. The results show that the matte grade strongly influences Cu losses in slag. The dissolved and entrained losses account for 10%–20% and 80%–90% of the total SKS industrial Cu losses in slag, respectively. With increasing matte grade, the dissolved and entrained Cu losses in the SKS slag both increase continuously. When the matte grade is greater than 68%, the content of Cu in the smelting slag increases much more dramatically. To obtain a high direct recovery of copper, the matte grade should be less than 75% in industrial SKS copper production.
基金Projects(51104128,51234009)supported by the National Natural Science Foundation of China
文摘The solution behavior, including solubility, reactivity and sedimentation, of ZnO and ZnS in a Na_2CO_3-NaCl molten salt used for Sb smelting was investigated in the temperature range of 700-1000 oC. The saturated amount of dissolved ZnO in the molten salt remained constant at 0.02% and was unaffected by temperature; additionally, ZnO did not react with the molten salt. In contrast, the saturated amount of dissolved ZnS in the eutectic molten salt increased with increasing temperature, and the content of ZnS was 0.53% at 1000 oC. In addition, ZnS reacted with Na_2CO_3 above 900 oC to give ZnO. The sedimentation rates of these three species in the molten salt followed the order of Sb>ZnS>ZnO. It was thus concluded that ZnO is an appropriate sulfur-fixing agent for low-temperature Sb smelting in a Na_2CO_3-NaCl molten medium, and that the optimal smelting temperature is below 900 oC.
基金financially supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No. 2015BAB19B02)the National Program on Key Basic Research Project of China (No. 2013CB632603)
文摘The effect of diboron trioxide(B_2O_3) on the crushing strength and smelting mechanism of high-chromium vanadium–titanium magnetite pellets was investigated in this work. The main characterization methods were X-ray fluorescence, inductively coupled plasma–atomic emission spectroscopy, mercury injection porosimetry, X-ray diffraction, metallographic microscopy, and scanning electron microscopy–energy-dispersive X-ray spectroscopy. The results showed that the crushing strength increased greatly with increasing B_2O_3 content and that the increase in crushing strength was strongly correlated with a decrease in porosity, the formation of liquid phases, and the growth and recrystallization consolidation of hematite crystalline grains. The smelting properties were measured under simulated blast furnace conditions; the results showed that the smelting properties within a certain B_2O_3 content range were improved and optimized except in the softening stage. The valuable element B was easily transformed to the slag, and this phenomenon became increasingly evident with increasing B_2O_3 content. The formation of Ti(C,N) was mostly avoided, and the slag and melted iron were separated well during smelting with the addition of B_2O_3. The size increase of the melted iron was consistent with the gradual optimization of the dripping characteristics with increasing B_2O_3 content.
基金Key Industrial Technology Development Project of China (No.20051255)National Natural Science Foundation of China (No.50364004)+1 种基金Scientific and Technological Project of Jiangxi Province (No.20061B0101100)Natural Science Foundation of Jiangxi Province (No.2007GZC0713)
文摘The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO_2 and MgO in copper concentrate;output layer includes three nodes:matte grade,matte temperature and Fe/SiO_2 in slag,and net structure was 8-13-10-3.Then,the internal relationship between the technological parameters and the objective parameters was built after the CFSPNNM was trained by us...
文摘Based on the principle of life cycle assessment, CO2 and SO2 emission of Imperial Smelting Process in a certain zinc-lead smelter was analyzed by life cycle inventory method. According to the system expansion and substitution method, the environmental impacts of co-products were allocated among the main products of zinc, lead and sulfuric acid. The related impacts were assessed by use of Global Warming Potential （GWP） and Acidification Potential （ACP）. The results show that the GWP index from 1998 to 2000 is 11.53, 11.65, 10.93 tCO2-eq/tZn respectively, the ACP index decreases from 14.88 kgSO2-eq/tZn in 1998 to 10.99 kgSO2-eq/tZn in 2000. Power and electricity generation, followed by smelting and zinc distillation, are mainly responsible for GWP. Sintering individually affects ACP. Reduction in greenhouse gas emissions of the ISP may come from energy conservation measures rather than from technological developments. And recycling more secondary Pb and Zn materials effectively treated by ISP, and reducing the amount of primary metal are the main ways to put SO2 emission under control.
文摘A computer model has been developed to simulate the nickel smelting process. The primary assumption of the model is that six phases in the nickel smelting furnace are in chemical equilibrium. The amounts of all components in matte, slag and gaseous phases under equilibrium are calculated by using the data of free energies of formation and activity coefficients of components. Two nickel sulfide species are used to allow for the modeling of sulfur-deficient mattes. The predictions by the present computer model are compared with the known data from Kalgoorlie nickel flash smelting. The agreements between the computer predictions and the known data are excellent,so that the present computer model can be used to monitor and optimize the actual industrial operations of nickel smelting process. The distribution behaviors of Ni, Co, Cu, Fe, S and O in the nickel smelting furnace are basically dependent on the process factors such as smelting temperature, volumes of air, and the element content.
文摘Reduction rate of ferrous oxide in smelting reduction with iron bath has been studied.The main affecting factors on reduction rate,such as composition of the melt,temperature of molten bath,basicity of slag and the way of supplying carbonaceous materials have also been investigated.
基金The Special Science Fund of Northwest University for Nationalities and the Natural Science Foundation ofGansu Province
文摘A field survey was conducted to investigate the metal and arsenic contamination in soils and vegetables on four villages (Shuichuan (SCH), Beiwan (BWA), Dongwan (DWA) and Wufe (WFE)) located along, Baiyin, China, and to evaluate the possible health risks to local population through foodchain. Results show that the most significantly contaminated soils occurred upstream at SCH where Cd, Cu and As concentrations exceeded maximum allowable concentrations for Chinese agricultural soil. Further downstream the degree of contamination semi-systematically decreased in concentrations of metal. Generally, the leafy vegetables were more heavily contaminated than non-leafy vegetables. Chinese cabbage is the most severely contaminated, the concentrations of Cd exceeded the maximum permit levels (0.05 mg/kg) by 4.5 times. Bio-accumulate factor also shows that an entry of Cd to food chain plants is the greatest potential. Furthermore, the estimated daily intake amounts of the considered toxic elements (Cd, Pb and Cu) from the vegetables grown at SCH and BWA and DWA have exceeded the recommended dietary allowance levels. Thus, the vegetables grown in three villages above, which affected by Baiyin mining and smelting have a health hazard for human consumption.
文摘Compost has been used to stabilise lead (Pb) in soil. However, compost contains a high level of dissolved organic matter (DOM) which may make Pb bioavailable in plant and thereby limiting its effectiveness and application. Addition of biochar to compost can reduce this effect. Rice husk (RH) and Cashew nut shell (CNS) biochars and compost-modified biochars were used in comparison to compost for stabilizing Pb in lead smelting slag (LSS)-contaminated soil (Pb = 18,300 mg/kg) in Nigeria. Efficiency of Pb stabilisation in control and amended soils was assessed using CaCl2 batch leaching experiment and plant performance. In pot experiments, maize plant was grown on the contaminated soil and on soil treated with minimum and optimum doses of the amendments singly and in combination for 6 weeks. Agronomical and chemical parameters of the plants were measured. CaCl2-extractable Pb in the untreated soil was reduced from 60 mg/kg to 0.55 mg/kg in RHB amended soils and non-detectable in other amended soils. RH-biochar/compost increased plant height, number of leaf and leaf area more than the others. Similarly, at minimum rate, it reduced root and shoot Pb by 91% and 86.0% respectively. Compost-modified rice husk biocharstabilised Pb in lead smelting slag contaminated soil reduced Pb plant uptake and improved plant growth. Lead stabilisation through the use of rice husk biochar with compost may be a green method for remediation of lead smelting slag-contaminated soil.
