At three critical temperatures which were obtained by thermo-gravimetry-differential thermal analysis–differential scanning calorimetry（TG/DTG/DSC）curves of lanthanum nitrate crystal, the air thermal decomposition ...At three critical temperatures which were obtained by thermo-gravimetry-differential thermal analysis–differential scanning calorimetry（TG/DTG/DSC）curves of lanthanum nitrate crystal, the air thermal decomposition experiments and solid–liquid spray doping simulation procedures of lanthanum nitrate crystal were carried out, and their products were analyzed by X-ray diffraction（XRD）. Meanwhile, the spray doping processing of Mo O2–50 wt% La（NO3）3composite powder was undergone with lanthanum nitrate solution as the dopant,and doped Mo O2powder was analyzed by XRD. The results demonstrate that during the traditional solid–liquid spray doping processing, lanthanum nitrate, in the form of either crystal or aqueous solution, would be converted into La（NO3）3á4H2O by the dehydration reaction, rather than be decomposed to La2O3and NO or NO2. Therefore, it is inferred that the oxynitride gas produced from the process is attributed to the decomposition of residual HNO3in lanthanum nitrate crystal. The source of HNO3is supported by the chemical composition of lanthanum nitrate crystal.展开更多
The lanthanum trivalent ion doped TiO2 nanopowders were prepared by liquid plasma spray with solution of titanium tetra-tert-butoxide and alcohol as feedstock and La(NO3)3·6H2O as doping component. The photocatal...The lanthanum trivalent ion doped TiO2 nanopowders were prepared by liquid plasma spray with solution of titanium tetra-tert-butoxide and alcohol as feedstock and La(NO3)3·6H2O as doping component. The photocatalytic activity of samples at different doping concentrations in photocatalytic degradation of methyl orange was discussed. The powders were characterized by Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD), and the effect of doped ion on the pattern, phase composition and crystallite sizes were analyzed. The results indicated that lanthanum trivalent ion doped TiO2 nanopowders could be prepared by liquid plasma spray. Lanthanum trivalent ion doping increased the photocatalytic activity of TiO2 greatly, the optimal doping concentration was 0.5%. The doped powders were the mixture of anatase phase and rutile phase. The contents of anatase phase decreased firstly and then increased with an increase in the contents of lanthanum trivalent ion. Doping lanthanum trivalent ion could make the TiO2 nanopowders uniform and reduced its particle size.展开更多
In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full con...In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full cone jets when the dust source was covered identically by foam.It is proved that foam consumption was least when an arc jet was used.Foam production capability of an arc jet nozzle under different conditions was investigated through experiments.The results show that with the gas liquid ratio(GLR)increasing,the spray state of an arc jet nozzle presents successively water jet,foam jet and mist.Under a reasonable working condition range of foam production and a fixed GLR,foam production quantity increases at first,and then decreases with the increase of liquid supply quantity.When the inner diameter of the nozzle is 14 mm,the best GLR is 30 and the optimum liquid supply quantity is0.375 m^3/h.The results of field experiments show that the total dust and respirable dust suppression efficiency of arc jet nozzles is 85.8%and 82.6%respectively,which are 1.39 and 1.37 times higher than the full cone nozzles and 1.20 and 1.19 times higher than the fiat nozzles.展开更多
Objective:To explore the effect of modified nasogastric tube placement and Rehabilitation New Liquid Spray in patients with indwelling gastric tube.Methods:Eighty-six cases with indwelling gastric tube in our hospital...Objective:To explore the effect of modified nasogastric tube placement and Rehabilitation New Liquid Spray in patients with indwelling gastric tube.Methods:Eighty-six cases with indwelling gastric tube in our hospital from January 2020 to May 2021 were randomly selected and divided into the reference group and the research group.The reference group was treated by modified gastric tube placement,and the research group was given the Rehabilitation New Liquid Spray intervention.The effect of the interventions on two groups was observed.Results:The incidence of nasal mucosal injury in the research group was lower than that in the reference group,and the incidence of pharyngeal mucosal injury in the research group was lower than that in the reference group(P<0.05).The pain score of the study group was lower than that of the reference group at 8 h,12 h and 24 h after replacement,and the incidence of hoarseness,swallowing discomfort and dry oropharynx was lower than that of the reference group(P<0.05).Conclusion:The application of modified gastric tube placement and Rehabilitation New Liquid Spray intervention in patients with indwelling gastric tube can effectively reduce the nasopharyngeal injury and improve the pain of catheterization.展开更多
The pintle injector used for a liquid rocket engine is a newly re-attracted injection system famous for its wide throttle ability with high efficiency. The pintle injector has many variations with complex inner struct...The pintle injector used for a liquid rocket engine is a newly re-attracted injection system famous for its wide throttle ability with high efficiency. The pintle injector has many variations with complex inner structures due to its moving parts. In order to study the rotating flow near the injector tip, which was observed from the cold flow experiment using water and air, a numerical simulation was adopted and a verification of the numerical model was later conducted. For the verification process, three types of experimental data including velocity distributions of gas flows, spray angles and liquid distribution were all compared using simulated results. The numerical simulation was performed using a commercial simulation program with the Eulerian multiphase model and axisymmetric two dimensional grids. The maximum and minimum velocities of gas were within the acceptable range of agreement, however, the spray angles experienced up to 25% error when the momentum ratios were increased. The spray density distributions were quantitatively measured and had good agreement. As a result of this study, it was concluded that the simulation method was properly constructed to study specific flow characteristics of the pintle injector despite having the limitations of two dimensional and coarse grids.展开更多
To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the j...To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.展开更多
The onset of cavitating conditions inside the nozzle of liquid injectors is known to play a major role on spray characteristics,especially on jet penetration and break-up.In this work,we present a Direct Numerical Sim...The onset of cavitating conditions inside the nozzle of liquid injectors is known to play a major role on spray characteristics,especially on jet penetration and break-up.In this work,we present a Direct Numerical Simulation(DNS)based on the Lattice Boltzmann Method(LBM)to study the fluid dynamic field inside the nozzle of a cavitating injector.The formation of the cavitating region is determined via a multi-phase approach based on the Shan-Chen equation of state.The results obtained by the LBM simulation show satisfactory agreement with both numerical and experimental data.In addition,numerical evidence of bubble break-up,following upon flow-induced cavitation,is also reported.展开更多
基金financially supported by the National Science and Technology Support Program of China (No. 2012BAE06B02)
文摘At three critical temperatures which were obtained by thermo-gravimetry-differential thermal analysis–differential scanning calorimetry（TG/DTG/DSC）curves of lanthanum nitrate crystal, the air thermal decomposition experiments and solid–liquid spray doping simulation procedures of lanthanum nitrate crystal were carried out, and their products were analyzed by X-ray diffraction（XRD）. Meanwhile, the spray doping processing of Mo O2–50 wt% La（NO3）3composite powder was undergone with lanthanum nitrate solution as the dopant,and doped Mo O2powder was analyzed by XRD. The results demonstrate that during the traditional solid–liquid spray doping processing, lanthanum nitrate, in the form of either crystal or aqueous solution, would be converted into La（NO3）3á4H2O by the dehydration reaction, rather than be decomposed to La2O3and NO or NO2. Therefore, it is inferred that the oxynitride gas produced from the process is attributed to the decomposition of residual HNO3in lanthanum nitrate crystal. The source of HNO3is supported by the chemical composition of lanthanum nitrate crystal.
基金the Natural Science Foundation of Shannxi ,China (2005E103)
文摘The lanthanum trivalent ion doped TiO2 nanopowders were prepared by liquid plasma spray with solution of titanium tetra-tert-butoxide and alcohol as feedstock and La(NO3)3·6H2O as doping component. The photocatalytic activity of samples at different doping concentrations in photocatalytic degradation of methyl orange was discussed. The powders were characterized by Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD), and the effect of doped ion on the pattern, phase composition and crystallite sizes were analyzed. The results indicated that lanthanum trivalent ion doped TiO2 nanopowders could be prepared by liquid plasma spray. Lanthanum trivalent ion doping increased the photocatalytic activity of TiO2 greatly, the optimal doping concentration was 0.5%. The doped powders were the mixture of anatase phase and rutile phase. The contents of anatase phase decreased firstly and then increased with an increase in the contents of lanthanum trivalent ion. Doping lanthanum trivalent ion could make the TiO2 nanopowders uniform and reduced its particle size.
基金supported by the National Natural Science Foundation of China(No.51474216)
文摘In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full cone jets when the dust source was covered identically by foam.It is proved that foam consumption was least when an arc jet was used.Foam production capability of an arc jet nozzle under different conditions was investigated through experiments.The results show that with the gas liquid ratio(GLR)increasing,the spray state of an arc jet nozzle presents successively water jet,foam jet and mist.Under a reasonable working condition range of foam production and a fixed GLR,foam production quantity increases at first,and then decreases with the increase of liquid supply quantity.When the inner diameter of the nozzle is 14 mm,the best GLR is 30 and the optimum liquid supply quantity is0.375 m^3/h.The results of field experiments show that the total dust and respirable dust suppression efficiency of arc jet nozzles is 85.8%and 82.6%respectively,which are 1.39 and 1.37 times higher than the full cone nozzles and 1.20 and 1.19 times higher than the fiat nozzles.
文摘Objective:To explore the effect of modified nasogastric tube placement and Rehabilitation New Liquid Spray in patients with indwelling gastric tube.Methods:Eighty-six cases with indwelling gastric tube in our hospital from January 2020 to May 2021 were randomly selected and divided into the reference group and the research group.The reference group was treated by modified gastric tube placement,and the research group was given the Rehabilitation New Liquid Spray intervention.The effect of the interventions on two groups was observed.Results:The incidence of nasal mucosal injury in the research group was lower than that in the reference group,and the incidence of pharyngeal mucosal injury in the research group was lower than that in the reference group(P<0.05).The pain score of the study group was lower than that of the reference group at 8 h,12 h and 24 h after replacement,and the incidence of hoarseness,swallowing discomfort and dry oropharynx was lower than that of the reference group(P<0.05).Conclusion:The application of modified gastric tube placement and Rehabilitation New Liquid Spray intervention in patients with indwelling gastric tube can effectively reduce the nasopharyngeal injury and improve the pain of catheterization.
基金supported by Advanced Research Center Program(NRF-2013R1A5A1073861)through the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)contracted through Advanced Space Propulsion Research Center at Seoul National University
文摘The pintle injector used for a liquid rocket engine is a newly re-attracted injection system famous for its wide throttle ability with high efficiency. The pintle injector has many variations with complex inner structures due to its moving parts. In order to study the rotating flow near the injector tip, which was observed from the cold flow experiment using water and air, a numerical simulation was adopted and a verification of the numerical model was later conducted. For the verification process, three types of experimental data including velocity distributions of gas flows, spray angles and liquid distribution were all compared using simulated results. The numerical simulation was performed using a commercial simulation program with the Eulerian multiphase model and axisymmetric two dimensional grids. The maximum and minimum velocities of gas were within the acceptable range of agreement, however, the spray angles experienced up to 25% error when the momentum ratios were increased. The spray density distributions were quantitatively measured and had good agreement. As a result of this study, it was concluded that the simulation method was properly constructed to study specific flow characteristics of the pintle injector despite having the limitations of two dimensional and coarse grids.
文摘To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.
文摘The onset of cavitating conditions inside the nozzle of liquid injectors is known to play a major role on spray characteristics,especially on jet penetration and break-up.In this work,we present a Direct Numerical Simulation(DNS)based on the Lattice Boltzmann Method(LBM)to study the fluid dynamic field inside the nozzle of a cavitating injector.The formation of the cavitating region is determined via a multi-phase approach based on the Shan-Chen equation of state.The results obtained by the LBM simulation show satisfactory agreement with both numerical and experimental data.In addition,numerical evidence of bubble break-up,following upon flow-induced cavitation,is also reported.
