The research and developments of a new type of inorganic ion exchanger, crystalline silicotitanate (CST) are reviewed. This material is stable against radiation, and the CST has high selectivity for Cs over Na, K and ...The research and developments of a new type of inorganic ion exchanger, crystalline silicotitanate (CST) are reviewed. This material is stable against radiation, and the CST has high selectivity for Cs over Na, K and Rb. It performs well in acidic, neutral, and basic solutions. The results of ion exchange tests show that CST is an excellent candidate for Cs removal from high-level liquid waste.展开更多
This study focused on the transfer of experimental results of anaerobic digestion of liquid waste from an attiéké (steamed cassava semolina) factory to a 6 m<sup>3</sup> pilot digester. The exper...This study focused on the transfer of experimental results of anaerobic digestion of liquid waste from an attiéké (steamed cassava semolina) factory to a 6 m<sup>3</sup> pilot digester. The experimental digester and the pilot were powered as follows: Lw + U + C (liquid waste + urine + cow dung). To the results, the experimental digester mesophilic with a progressive elimination of COD. Also, the nitrogen concentrations in the experimental reactor had little removal with alkaline pH. As for the biogas product in this digester, a volume of 3.6 m<sup>3</sup> was obtained with a positive flammability test. The transition from the laboratory scale to the semi-industrial scale retains the results of purification and fuel biogas production of the experimental digester.展开更多
A process for actinide(Ⅲ)and lanthanum(Ⅲ)extraction separation from high-level liquid waste(HLLW)was proposed,with N,N,N’,N’-tetraoctyl diglycolamide(TODGA)as the extractant,tri-n–butyl phosphate(TBP)as the phase...A process for actinide(Ⅲ)and lanthanum(Ⅲ)extraction separation from high-level liquid waste(HLLW)was proposed,with N,N,N’,N’-tetraoctyl diglycolamide(TODGA)as the extractant,tri-n–butyl phosphate(TBP)as the phase modifier and 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine(PyTri-Diol or PTD)as hydrophilic stripping agent.This‘hot test’was successfully carried out,achieving 99.92%removal of americium-241(^(241)Am)with a separation factor SF(Eu/Am)of 3.8×10^(3)in the actinide(Ⅲ)product solution.The results show that bisamide podand extractants can effectively realize the extraction and separation of actinide(Ⅲ)and lanthanum(Ⅲ)from Chinese commercial HLLW and thus have a bright practical application potential for the treatment of commercial HLLW.展开更多
Soft N-donor bis-triazin bipyridines derives(R-BTBP)are a type of very promising extratant for extraction and complexation with long-lived trivalent minor actinides over lanthanides from highly active liquid waste(HLW...Soft N-donor bis-triazin bipyridines derives(R-BTBP)are a type of very promising extratant for extraction and complexation with long-lived trivalent minor actinides over lanthanides from highly active liquid waste(HLW).In addition to minor actinides,R-BTBP also holds very strong complexation ability toward fission palladium.However,few studies have been focused on the separation and complexation with the fission product Pd(Ⅱ)by R-BTBP.Herein,the complexation behaviors of Pd(Ⅱ)with four typical R-BTBP ligands were systematically studied by single crystal X-ray diffraction,1H NMR titration and theoretical calculation.The effects of R-BTBP initial conformation and nitrate anions on the complexation behaviors of R-BTBP with Pd(Ⅱ)were thoughtfully analyzed.Both the 1:1 and 2:1 binuclear complexes could be formed between Pd(Ⅱ)and R-BTBP with initialⅡconformation in the presence of nitrate anions,while only one 1:1 type Pd(Ⅱ)complex could be formed for those with initial OO conformation.Without nitrate anion,only one 1:1 type complex was formed in solution.The structure of the 1:1 Pd(Ⅱ)/R-BTBP complex was firstly characterized by single crystal crystallography.DFT calculation results showed that a significant large rotational energy barrier(21.8~22.6 kcal/mol)must be overcome to form theⅡtype 2:1Pd(Ⅱ)complex for those OO type R-BTBP ligands,however which would not prevent them from forming the 1:1 type complex.展开更多
Extraction of theanine from waste liquid of tea polyphenol production was studied in aqueous surfactanttwo-phase system （ASTP） with cationic surfactant （CTAB） and anionic surfactant （SDS）. Results indicate that ...Extraction of theanine from waste liquid of tea polyphenol production was studied in aqueous surfactanttwo-phase system （ASTP） with cationic surfactant （CTAB） and anionic surfactant （SDS）. Results indicate that the region of ASTP is narrow and there is only a two-phase region of cationic surfactant. The increase in concentrations of NaBr and Na2SO4 are beneficial to the formation of ASTP. Theanine concentration in the bottom phase increases with increasing concentration of theanine, whereas the Partition coefficient and extraction rate only change a littlewhen the concentration of theanine is above 0.2 g.L-＇. With the increase of SDS concentration, the phase ratio and the partition coefficient decrease, while the extraction efficiency of theanine increases and the concentration of theanine changes a little in the range from 2.4/7.5 to 2.8/7.2 for SDS/CTAB ratio. The temperature has a notable ef- fect on the concentration of theanine in the bottom phase, partition coefficient and extraction rate of theanine. The increase of waste liquid decreases the phase ratio, increases the concentration and extraction rate of theanine in the bottom ohase, since the orotein and the saccharide enter the bottom nhase with theanine.展开更多
Apostichopus japonicus Selenka is an ideal tonic food that is used traditionally in many Asian countries, and it contains many bioactive substances, such as antioxidant, antimicrobial, and anticancer materials. To con...Apostichopus japonicus Selenka is an ideal tonic food that is used traditionally in many Asian countries, and it contains many bioactive substances, such as antioxidant, antimicrobial, and anticancer materials. To convert waste liquid generated during production into a useful resource, extract from waste liquid was isolated by column chromatography and studied by the pyrogallol autoxidation and 1,10-phenanthroline-Fe^2＋ oxidation methods. Results show that the extract scavenged about 91% of the superoxide anion radical at a concentration of 1.4 mg/mL and 24% of the hydroxyl radical at 3.3 mg/mL. Four compounds were isolated and identified from the extract： 2,4-dihydroxy-5-methyl-1,3-azine; 2,4-dihydroxy- 1,3-diazine; 3-O-β-D-quinovopranosyl-（1→2）-4-O-sodium sulfate-β-D-xylopranosyl]-holosta-9（11）-ene313,12β,17α-triol; and 24-ethyl-5α-cholesta-7-ene-3β-O-β-D-xylopyranoside. All of these compounds are known in A. japonicus, and were found in the waste liquid for the first time.展开更多
Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed t...Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed that the CWM exhibited the lowest viscosity when it was diluted with an appropriate amount of water with the waste eiquids added. The experiments also indicated that the maximum coal concentration in the practically applicable CWMs whose apparent viscosity has to be below 1000 mPa·s increased from 56.5% to 62.5%(mass fraction), and 56.5% is the maximum coal mass fraction of the CWM prepared without additives. These data show the effectiveness of the waste liquids as the additives for preparing CWMs. The zeta potential of coal particles in the CWMs changed with the addition of lignin. From the change, the steric repulsion effect of the lignin adsorbed on the coal particles is concluded to be mainly responsible for the CWM dispersion. The waste liquids contain less sulfur than PSSNa(polystyrene sulfonate sodium salt), a typical dispersant which is currently used for preparing the commercial CWM, when the sulfur content in the unit mass of the solid matters within the waste liquids is compared with that in unit mass of PSSNa. This fact suggests that the waste liquids are more advantageous than PSSNa as far as air pollutants are concerned.展开更多
It is difficult to treat 2-amino-thiazoline-4-carboxylic acid （ATC） waste liquid effectively at present for its characteristics of high chemical oxygen demand （COD）, high salinity and low biodegradability. In orde...It is difficult to treat 2-amino-thiazoline-4-carboxylic acid （ATC） waste liquid effectively at present for its characteristics of high chemical oxygen demand （COD）, high salinity and low biodegradability. In order to solve this problem, this paper presents several kinds of physical-chemical treatment unit techniques, including acid separation, catalytic oxidation and coagulation. First of all, acid separation was adopted to precipitate relevant organics at isoelectric point. When the temperature and pH value of acid separation were controlled at about 5 ℃ and 2.2 respectively, the COD removal rate could reach 27.600. Secondly, oxidation was used to break chemical constitution of refractory organics. The optimal reaction parameters of catalytic oxidation should be 20 ℃, pH adjusted to 5.0 and [Fe2+] 300 mg/L. Then with 500 H2O2 added and after one-hour reaction, the COD removal rate could achieve about 5200. Finally, coagulation was adopted to remove a portion of refractory organics, and 1500 polymeric molysite flocculant was the best for the coagulation, and the COD removal rate could reach about 1500. Therefore, the proposed feasible process of physical-chemical pretreatment for ATC waste liquid could have about 7000 COD removed in total.展开更多
Pickling waste liquid of the steel industry is included in National Hazardous Wastes Catalogue because of its high corrosion and large discharge. The techniques for treating pickling waste liquid （ H2SO4 ） in steel ...Pickling waste liquid of the steel industry is included in National Hazardous Wastes Catalogue because of its high corrosion and large discharge. The techniques for treating pickling waste liquid （ H2SO4 ） in steel industry is summarized. The advantages, disadvantages and applied ranges of all kinds of control technologies are comparatively analysed. The research trends of techniques for treating pickling waste liquid （ H2SO4 ） are the resource reclamation technologies in future which is pointed out in the paper.展开更多
The environmentally friendly and resourceful utilization of organic waste liquid is one of the frontiers of environmental engineering. With the increasing demand for chemicals, the problem of organic waste liq- uid wi...The environmentally friendly and resourceful utilization of organic waste liquid is one of the frontiers of environmental engineering. With the increasing demand for chemicals, the problem of organic waste liq- uid with a high concentration of inorganic pollutants in the processing of petroleum, coal, and natural gas is becoming more serious. In this study, the high-speed self-rotation and flipping of particles in a three- dimensional cyclonic turbulent field was examined using a synchronous high-speed camera technique; the self-rotation speed was found to reach 2000-6000 rad.s 1. Based on these findings, a cyclonic gas- stripping method for the removal of organic matter from the pores of particles was invented. A techno- logical process was developed to recover organic matter from waste liquid by cyclonic gas stripping and classifying inorganic particles by means of airflow acceleration classification. A demonstration device was built in Sinopec＇s first ebullated-bed hydro-treatment unit for residual oil. Compared with the T-STAR fixed-bed gas-stripping technology designed in the United States, the maximum liquid-removal effi- ciency of the catalyst particles in this new process is 44.9% greater at the same temperature, and the time required to realize 95% liquid-removal efficiency is decreased from 1956.5 to 8.4 s. In addition, we achieved the classification and reuse of the catalyst particles contained in waste liquid according to their activity. A proposal to use this new technology was put forward regarding the control of organic waste liquid and the classification recovery of inorganic particles in an ebullated-bed hydro-treatment process for residual oil with a processing capacity of 2×106 t.a^1. It is estimated that the use of this new tech- nology will lead to the recovery of 3100 t.a 1 of diesel fuel and 647 t.a^1 of high-activity catalyst; in addi- tion, it will reduce the consumption of fresh catalyst by 518 t.a^1. The direct economic benefits of this process will be as high as 37.28 million CNY per year.展开更多
Based on the water quality detection and analysis of guar gum waste liquid,as well as the data of experiments on the treatment of waste liquid under different viscosity and pH conditions,the influencing factors of sol...Based on the water quality detection and analysis of guar gum waste liquid,as well as the data of experiments on the treatment of waste liquid under different viscosity and pH conditions,the influencing factors of solid-liquid separation under conventional"coagulation+filtration"treatment process are studied.Under the conventional"coagulation+filtration"treatment process,the viscosity of guar gum waste liquid is lower than 3 mPa·s;the pH is 6-7.5;the filtration accuracy is not lower than 20μm,which can meet better treatment conditions.This experimental study provides an experimental basis for the optimal design of the treatment process of guar gum waste liquid.展开更多
The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps we...The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps were added to acidic copper chloride waste enchants produced in the PCB industry to obtain copper powder. Composition analysis showed that this powder contained impurities such as Fe, Ni, and water. So, drying and purification were carried out by using microwave and a centrifugal separator. Thereby the copper powder had a purity of higher than 99% and spherical form in morphology. The copper powder size was decreased by ball milling.展开更多
Laboratory wastewater has been suggested as an important escape route for microorganisms from research environments.Likely reasons for the unintentional release of laboratory organisms are shortcomings in the handling...Laboratory wastewater has been suggested as an important escape route for microorganisms from research environments.Likely reasons for the unintentional release of laboratory organisms are shortcomings in the handling of infectious liquid biological waste(LBW)and inadequate inactivation procedures.We developed an analytical approach to investigate the use of chemical inactivation(CI)procedures in Swiss research laboratories by on-site random sampling of presumably inactivated infectious LBW and testing it for the presence of infectious lentiviruses(HIV-1)and adenoviruses(AdV).In addition,standard operating procedures(SOPs)for CI were collected and evaluated,and laboratorystaff knowledge of CI processes was assessed using a questionnaire.Although we found several deficiencies in the technical knowledge and training of laboratory staff on the CI of LBW,as documented by 27 returned questionnaires,no infectious viruses were detected in the eight LBW samples collected.Whilst we acknowledge that the number of LBW samples and SOPs is small,we conclude that CI of LBW containing infectious lentiviruses and adenoviruses does not result in the systematic release of considerable amounts of infectious viruses into the environment from research laboratories in Switzerland.展开更多
The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, l...The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, lipid, and some of the humification indices considered, suggesting that the humification theory is actually humic substances produced from simple-structured natural organic substrates. Weight-average molecular weight （Mw）, number-average molecular weight （Mn）, and the ratio Mw/Mn of dissolved organic matters at different stages of the process were measured by gel permeation chromatography. The results showed that Mn and Mw increased with reaction time from 352 to 17,191, and from 78,707 to 104,564, respectively. The ratio of Mn/Mw decreased from 223.3 to 6.1. This reflected the growth of the polymerization degree of dissolvable organic matters in the process; furthermore, it indicated the formation of complex molecules （humic substances） from more simple molecules. Bacteria-mineral water （BMW） （the effluent of the process） treatments can exert hormone-like activity for enhanced seed germination of wheat and rice and greatly improved chlorophyll synthesis in wheat and rice leaves, Major polyamines （plant regulators） putrescine, spermidine, and spermine, were found in BMW by a high performance liquid chromatography （HPLC） method, which may explain the hormone-like activity of BMW.展开更多
The exchange performances and the distribution coefficient of Cesium Ion-Sieve (Cs-IS) for cesium and for some rare earth elements were compared. In particula r, the effects of neodymium on the cesium ion exchange an...The exchange performances and the distribution coefficient of Cesium Ion-Sieve (Cs-IS) for cesium and for some rare earth elements were compared. In particula r, the effects of neodymium on the cesium ion exchange and the Cs+ selectivity v ariation on Cs-IS owing to introduction of rare earth elements into HLLW were s tudied. Though rare earth elements exhibit a small influence on the distributio n coefficient for Cs+, they impair Cs-exchange capacity of Cs-IS to some ext ent. This interruption on the selectivity to Cs+ can be significantly eliminat ed provided an appropriate ratio of liquid to solid V:m is used.展开更多
On the bases of the field survey and a large number of testing data, we process the qualitative and quantitative assessment of the mine environment in the mid south of Shandong Province using the following grade Ⅰ fa...On the bases of the field survey and a large number of testing data, we process the qualitative and quantitative assessment of the mine environment in the mid south of Shandong Province using the following grade Ⅰ factors:the surface subsidence in mining area, the three wastes of mine industries, the pollution sources, the surface water pollution, the underground water pollution and the air pollution. By means of emitting factor judgment and water quality indexes, we locate pollution sources, main pollutants, pollution type and pollution grade in the study area. Using the MAPGIS, we draw a zonality map of the mine environment. This paper attempts to offer a concrete example, including valuable assessment method, data and conclusion, for the assessment of mine environment from the integrated assessment of mineral resources and mine environment. This research is oriented towards the sustainable development and the ecological environment optimization.展开更多
A functional microcapsule was prepared by encapsulating the fine crystalline ammonium tungstophosphate （AWP） in calcium alginate polymer （CaALG）. The characterization of AWP-CaALG microcapsule was examined by SEM ...A functional microcapsule was prepared by encapsulating the fine crystalline ammonium tungstophosphate （AWP） in calcium alginate polymer （CaALG）. The characterization of AWP-CaALG microcapsule was examined by SEM and EPMA. The ad- sorption behavior of Cs（Ⅰ）, Rb（Ⅰ）, Sr（Ⅱ）, Pd（II）, Ru（Ⅲ）, Rh（Ⅲ）, La（Ⅲ）, Ce（Ⅲ）, Dy（Ⅲ） and Zr（IV） was investigated by the batch method. The batch experiments were carried out by varying the shaking times, HNO3 concentration, and initial concen- tration of metal ions. Relatively large K＋ values above 105 cm3/g for Cs（I） were obtained in the range of 0.1-5 M HNO3, re- sulting in a separation factor of Cs/Rb exceeding 102. In contrast, the K＋ values of Sr（II）, Pd（II）, Ru（Ⅲ）, La（Ⅲ）, Dy（Ⅲ）, Ce（Ⅲ） and Zr（IV） were considerably lower than 50 cm3/g. The K＋ value of Cs（1） decreased in the order of the coexisting ions, H＋ 〉 Na＋ 〉〉 NH4＋, and a linear relationship with a slop of about -1 was obtained between log Kd and log [NH4＋] （[NH4＋] 〉 0.01 M） The adsorption of Cs（I） was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. A high uptake percentage of 99.4% for Cs（I） was obtained by using the dissolved solutions of spent fuel from FBR-JOYO （JAEA）.展开更多
In this study,the electrochemical behavior of Pd(II)in nitric acid media was investigated using various electrochemical techniques.By analyzing the cyclic voltammogram of Pd(II)recorded at Pt electrode,a series of ele...In this study,the electrochemical behavior of Pd(II)in nitric acid media was investigated using various electrochemical techniques.By analyzing the cyclic voltammogram of Pd(II)recorded at Pt electrode,a series of electrochemical reactions associated with palladium were recognized,indicating that Pd(II)undergoes a single step two-electrons irreversible process.Electroreduction reaction of Pd(II)and auto-catalytic reactions of nitrous acid are supposed to play a leading role in low and high concentrations of nitric acid,respectively.Stirring could facilitate the reduction of Pd(II)in relatively low nitric acid concentration(3 mol/L).The value of charge transfer coefficient was determined to be 0.18 for the measurements at 298 K.The diffusion coefficient of Pd(II)increased from 1.89×10 8cm2/s at 288 K to 4.23×10 8cm2/s at 318 K,and the activation energy was calculated to be 21.5 kJ/mol.In electrowinning experiments,SEM images of palladium obtained by electrolysis reveal the dendrite growth in all cases,which is uniform all over the entire surface of Pt electrode.The recovery ratios of Pd at different nitric acid concentrations are high,and the faradic efficiency of electrolysis decreases with increasing the nitric acid concentration.When stirring was introduced during electrolysis,the electrodeposition rate of Pd increased substantially.展开更多
文摘The research and developments of a new type of inorganic ion exchanger, crystalline silicotitanate (CST) are reviewed. This material is stable against radiation, and the CST has high selectivity for Cs over Na, K and Rb. It performs well in acidic, neutral, and basic solutions. The results of ion exchange tests show that CST is an excellent candidate for Cs removal from high-level liquid waste.
文摘This study focused on the transfer of experimental results of anaerobic digestion of liquid waste from an attiéké (steamed cassava semolina) factory to a 6 m<sup>3</sup> pilot digester. The experimental digester and the pilot were powered as follows: Lw + U + C (liquid waste + urine + cow dung). To the results, the experimental digester mesophilic with a progressive elimination of COD. Also, the nitrogen concentrations in the experimental reactor had little removal with alkaline pH. As for the biogas product in this digester, a volume of 3.6 m<sup>3</sup> was obtained with a positive flammability test. The transition from the laboratory scale to the semi-industrial scale retains the results of purification and fuel biogas production of the experimental digester.
文摘A process for actinide(Ⅲ)and lanthanum(Ⅲ)extraction separation from high-level liquid waste(HLLW)was proposed,with N,N,N’,N’-tetraoctyl diglycolamide(TODGA)as the extractant,tri-n–butyl phosphate(TBP)as the phase modifier and 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine(PyTri-Diol or PTD)as hydrophilic stripping agent.This‘hot test’was successfully carried out,achieving 99.92%removal of americium-241(^(241)Am)with a separation factor SF(Eu/Am)of 3.8×10^(3)in the actinide(Ⅲ)product solution.The results show that bisamide podand extractants can effectively realize the extraction and separation of actinide(Ⅲ)and lanthanum(Ⅲ)from Chinese commercial HLLW and thus have a bright practical application potential for the treatment of commercial HLLW.
基金financially supported by the National Natural Science Foundation of China(Nos.91126021 and 21376210)Natural Science Foundation of Zhejiang Province(Nos.LY22B070003 and 2016R401088)。
文摘Soft N-donor bis-triazin bipyridines derives(R-BTBP)are a type of very promising extratant for extraction and complexation with long-lived trivalent minor actinides over lanthanides from highly active liquid waste(HLW).In addition to minor actinides,R-BTBP also holds very strong complexation ability toward fission palladium.However,few studies have been focused on the separation and complexation with the fission product Pd(Ⅱ)by R-BTBP.Herein,the complexation behaviors of Pd(Ⅱ)with four typical R-BTBP ligands were systematically studied by single crystal X-ray diffraction,1H NMR titration and theoretical calculation.The effects of R-BTBP initial conformation and nitrate anions on the complexation behaviors of R-BTBP with Pd(Ⅱ)were thoughtfully analyzed.Both the 1:1 and 2:1 binuclear complexes could be formed between Pd(Ⅱ)and R-BTBP with initialⅡconformation in the presence of nitrate anions,while only one 1:1 type Pd(Ⅱ)complex could be formed for those with initial OO conformation.Without nitrate anion,only one 1:1 type complex was formed in solution.The structure of the 1:1 Pd(Ⅱ)/R-BTBP complex was firstly characterized by single crystal crystallography.DFT calculation results showed that a significant large rotational energy barrier(21.8~22.6 kcal/mol)must be overcome to form theⅡtype 2:1Pd(Ⅱ)complex for those OO type R-BTBP ligands,however which would not prevent them from forming the 1:1 type complex.
基金Supported by the Fundamental Research Funds for the Central Universities(JUSRP11205)
文摘Extraction of theanine from waste liquid of tea polyphenol production was studied in aqueous surfactanttwo-phase system （ASTP） with cationic surfactant （CTAB） and anionic surfactant （SDS）. Results indicate that the region of ASTP is narrow and there is only a two-phase region of cationic surfactant. The increase in concentrations of NaBr and Na2SO4 are beneficial to the formation of ASTP. Theanine concentration in the bottom phase increases with increasing concentration of theanine, whereas the Partition coefficient and extraction rate only change a littlewhen the concentration of theanine is above 0.2 g.L-＇. With the increase of SDS concentration, the phase ratio and the partition coefficient decrease, while the extraction efficiency of theanine increases and the concentration of theanine changes a little in the range from 2.4/7.5 to 2.8/7.2 for SDS/CTAB ratio. The temperature has a notable ef- fect on the concentration of theanine in the bottom phase, partition coefficient and extraction rate of theanine. The increase of waste liquid decreases the phase ratio, increases the concentration and extraction rate of theanine in the bottom ohase, since the orotein and the saccharide enter the bottom nhase with theanine.
基金Supported by the National Special Research Fund for Non-Profit Sector(Ocean)(No.201205025-5)
文摘Apostichopus japonicus Selenka is an ideal tonic food that is used traditionally in many Asian countries, and it contains many bioactive substances, such as antioxidant, antimicrobial, and anticancer materials. To convert waste liquid generated during production into a useful resource, extract from waste liquid was isolated by column chromatography and studied by the pyrogallol autoxidation and 1,10-phenanthroline-Fe^2＋ oxidation methods. Results show that the extract scavenged about 91% of the superoxide anion radical at a concentration of 1.4 mg/mL and 24% of the hydroxyl radical at 3.3 mg/mL. Four compounds were isolated and identified from the extract： 2,4-dihydroxy-5-methyl-1,3-azine; 2,4-dihydroxy- 1,3-diazine; 3-O-β-D-quinovopranosyl-（1→2）-4-O-sodium sulfate-β-D-xylopranosyl]-holosta-9（11）-ene313,12β,17α-triol; and 24-ethyl-5α-cholesta-7-ene-3β-O-β-D-xylopyranoside. All of these compounds are known in A. japonicus, and were found in the waste liquid for the first time.
基金Supported by the Core Research for Evolutional Science and Technology(CREST) ,Japan Science and TechnologyCorporation(JST)
文摘Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed that the CWM exhibited the lowest viscosity when it was diluted with an appropriate amount of water with the waste eiquids added. The experiments also indicated that the maximum coal concentration in the practically applicable CWMs whose apparent viscosity has to be below 1000 mPa·s increased from 56.5% to 62.5%(mass fraction), and 56.5% is the maximum coal mass fraction of the CWM prepared without additives. These data show the effectiveness of the waste liquids as the additives for preparing CWMs. The zeta potential of coal particles in the CWMs changed with the addition of lignin. From the change, the steric repulsion effect of the lignin adsorbed on the coal particles is concluded to be mainly responsible for the CWM dispersion. The waste liquids contain less sulfur than PSSNa(polystyrene sulfonate sodium salt), a typical dispersant which is currently used for preparing the commercial CWM, when the sulfur content in the unit mass of the solid matters within the waste liquids is compared with that in unit mass of PSSNa. This fact suggests that the waste liquids are more advantageous than PSSNa as far as air pollutants are concerned.
文摘It is difficult to treat 2-amino-thiazoline-4-carboxylic acid （ATC） waste liquid effectively at present for its characteristics of high chemical oxygen demand （COD）, high salinity and low biodegradability. In order to solve this problem, this paper presents several kinds of physical-chemical treatment unit techniques, including acid separation, catalytic oxidation and coagulation. First of all, acid separation was adopted to precipitate relevant organics at isoelectric point. When the temperature and pH value of acid separation were controlled at about 5 ℃ and 2.2 respectively, the COD removal rate could reach 27.600. Secondly, oxidation was used to break chemical constitution of refractory organics. The optimal reaction parameters of catalytic oxidation should be 20 ℃, pH adjusted to 5.0 and [Fe2+] 300 mg/L. Then with 500 H2O2 added and after one-hour reaction, the COD removal rate could achieve about 5200. Finally, coagulation was adopted to remove a portion of refractory organics, and 1500 polymeric molysite flocculant was the best for the coagulation, and the COD removal rate could reach about 1500. Therefore, the proposed feasible process of physical-chemical pretreatment for ATC waste liquid could have about 7000 COD removed in total.
基金Supported by Open Fund Project of Key Laboratory of Environmenta Engineering in Jiangsu,China( KF2012006)Undergraduate Practice Innovation Training Plan Project of Jiangsu Colleges and Universities, China ( Sujiaogao[2011]10)Research Fund Project of Nanjing College of Chemical Technology in 2012,China( NHKY-2012-06)
文摘Pickling waste liquid of the steel industry is included in National Hazardous Wastes Catalogue because of its high corrosion and large discharge. The techniques for treating pickling waste liquid （ H2SO4 ） in steel industry is summarized. The advantages, disadvantages and applied ranges of all kinds of control technologies are comparatively analysed. The research trends of techniques for treating pickling waste liquid （ H2SO4 ） are the resource reclamation technologies in future which is pointed out in the paper.
基金This work was supported by the sponsorship of the National Science Foundation for Distinguished Young Scholars of China （51125032）, the sponsorship of the National Key Research and Development Program of China （2016YFC0204500）, and the National Natural Science Foundation of China （51608203）.
文摘The environmentally friendly and resourceful utilization of organic waste liquid is one of the frontiers of environmental engineering. With the increasing demand for chemicals, the problem of organic waste liq- uid with a high concentration of inorganic pollutants in the processing of petroleum, coal, and natural gas is becoming more serious. In this study, the high-speed self-rotation and flipping of particles in a three- dimensional cyclonic turbulent field was examined using a synchronous high-speed camera technique; the self-rotation speed was found to reach 2000-6000 rad.s 1. Based on these findings, a cyclonic gas- stripping method for the removal of organic matter from the pores of particles was invented. A techno- logical process was developed to recover organic matter from waste liquid by cyclonic gas stripping and classifying inorganic particles by means of airflow acceleration classification. A demonstration device was built in Sinopec＇s first ebullated-bed hydro-treatment unit for residual oil. Compared with the T-STAR fixed-bed gas-stripping technology designed in the United States, the maximum liquid-removal effi- ciency of the catalyst particles in this new process is 44.9% greater at the same temperature, and the time required to realize 95% liquid-removal efficiency is decreased from 1956.5 to 8.4 s. In addition, we achieved the classification and reuse of the catalyst particles contained in waste liquid according to their activity. A proposal to use this new technology was put forward regarding the control of organic waste liquid and the classification recovery of inorganic particles in an ebullated-bed hydro-treatment process for residual oil with a processing capacity of 2×106 t.a^1. It is estimated that the use of this new tech- nology will lead to the recovery of 3100 t.a 1 of diesel fuel and 647 t.a^1 of high-activity catalyst; in addi- tion, it will reduce the consumption of fresh catalyst by 518 t.a^1. The direct economic benefits of this process will be as high as 37.28 million CNY per year.
文摘Based on the water quality detection and analysis of guar gum waste liquid,as well as the data of experiments on the treatment of waste liquid under different viscosity and pH conditions,the influencing factors of solid-liquid separation under conventional"coagulation+filtration"treatment process are studied.Under the conventional"coagulation+filtration"treatment process,the viscosity of guar gum waste liquid is lower than 3 mPa·s;the pH is 6-7.5;the filtration accuracy is not lower than 20μm,which can meet better treatment conditions.This experimental study provides an experimental basis for the optimal design of the treatment process of guar gum waste liquid.
文摘The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps were added to acidic copper chloride waste enchants produced in the PCB industry to obtain copper powder. Composition analysis showed that this powder contained impurities such as Fe, Ni, and water. So, drying and purification were carried out by using microwave and a centrifugal separator. Thereby the copper powder had a purity of higher than 99% and spherical form in morphology. The copper powder size was decreased by ball milling.
文摘Laboratory wastewater has been suggested as an important escape route for microorganisms from research environments.Likely reasons for the unintentional release of laboratory organisms are shortcomings in the handling of infectious liquid biological waste(LBW)and inadequate inactivation procedures.We developed an analytical approach to investigate the use of chemical inactivation(CI)procedures in Swiss research laboratories by on-site random sampling of presumably inactivated infectious LBW and testing it for the presence of infectious lentiviruses(HIV-1)and adenoviruses(AdV).In addition,standard operating procedures(SOPs)for CI were collected and evaluated,and laboratorystaff knowledge of CI processes was assessed using a questionnaire.Although we found several deficiencies in the technical knowledge and training of laboratory staff on the CI of LBW,as documented by 27 returned questionnaires,no infectious viruses were detected in the eight LBW samples collected.Whilst we acknowledge that the number of LBW samples and SOPs is small,we conclude that CI of LBW containing infectious lentiviruses and adenoviruses does not result in the systematic release of considerable amounts of infectious viruses into the environment from research laboratories in Switzerland.
文摘The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, lipid, and some of the humification indices considered, suggesting that the humification theory is actually humic substances produced from simple-structured natural organic substrates. Weight-average molecular weight （Mw）, number-average molecular weight （Mn）, and the ratio Mw/Mn of dissolved organic matters at different stages of the process were measured by gel permeation chromatography. The results showed that Mn and Mw increased with reaction time from 352 to 17,191, and from 78,707 to 104,564, respectively. The ratio of Mn/Mw decreased from 223.3 to 6.1. This reflected the growth of the polymerization degree of dissolvable organic matters in the process; furthermore, it indicated the formation of complex molecules （humic substances） from more simple molecules. Bacteria-mineral water （BMW） （the effluent of the process） treatments can exert hormone-like activity for enhanced seed germination of wheat and rice and greatly improved chlorophyll synthesis in wheat and rice leaves, Major polyamines （plant regulators） putrescine, spermidine, and spermine, were found in BMW by a high performance liquid chromatography （HPLC） method, which may explain the hormone-like activity of BMW.
文摘The exchange performances and the distribution coefficient of Cesium Ion-Sieve (Cs-IS) for cesium and for some rare earth elements were compared. In particula r, the effects of neodymium on the cesium ion exchange and the Cs+ selectivity v ariation on Cs-IS owing to introduction of rare earth elements into HLLW were s tudied. Though rare earth elements exhibit a small influence on the distributio n coefficient for Cs+, they impair Cs-exchange capacity of Cs-IS to some ext ent. This interruption on the selectivity to Cs+ can be significantly eliminat ed provided an appropriate ratio of liquid to solid V:m is used.
文摘On the bases of the field survey and a large number of testing data, we process the qualitative and quantitative assessment of the mine environment in the mid south of Shandong Province using the following grade Ⅰ factors:the surface subsidence in mining area, the three wastes of mine industries, the pollution sources, the surface water pollution, the underground water pollution and the air pollution. By means of emitting factor judgment and water quality indexes, we locate pollution sources, main pollutants, pollution type and pollution grade in the study area. Using the MAPGIS, we draw a zonality map of the mine environment. This paper attempts to offer a concrete example, including valuable assessment method, data and conclusion, for the assessment of mine environment from the integrated assessment of mineral resources and mine environment. This research is oriented towards the sustainable development and the ecological environment optimization.
文摘A functional microcapsule was prepared by encapsulating the fine crystalline ammonium tungstophosphate （AWP） in calcium alginate polymer （CaALG）. The characterization of AWP-CaALG microcapsule was examined by SEM and EPMA. The ad- sorption behavior of Cs（Ⅰ）, Rb（Ⅰ）, Sr（Ⅱ）, Pd（II）, Ru（Ⅲ）, Rh（Ⅲ）, La（Ⅲ）, Ce（Ⅲ）, Dy（Ⅲ） and Zr（IV） was investigated by the batch method. The batch experiments were carried out by varying the shaking times, HNO3 concentration, and initial concen- tration of metal ions. Relatively large K＋ values above 105 cm3/g for Cs（I） were obtained in the range of 0.1-5 M HNO3, re- sulting in a separation factor of Cs/Rb exceeding 102. In contrast, the K＋ values of Sr（II）, Pd（II）, Ru（Ⅲ）, La（Ⅲ）, Dy（Ⅲ）, Ce（Ⅲ） and Zr（IV） were considerably lower than 50 cm3/g. The K＋ value of Cs（1） decreased in the order of the coexisting ions, H＋ 〉 Na＋ 〉〉 NH4＋, and a linear relationship with a slop of about -1 was obtained between log Kd and log [NH4＋] （[NH4＋] 〉 0.01 M） The adsorption of Cs（I） was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. A high uptake percentage of 99.4% for Cs（I） was obtained by using the dissolved solutions of spent fuel from FBR-JOYO （JAEA）.
基金supported by the National Natural Science Foundation of China(91026019,91126006)
文摘In this study,the electrochemical behavior of Pd(II)in nitric acid media was investigated using various electrochemical techniques.By analyzing the cyclic voltammogram of Pd(II)recorded at Pt electrode,a series of electrochemical reactions associated with palladium were recognized,indicating that Pd(II)undergoes a single step two-electrons irreversible process.Electroreduction reaction of Pd(II)and auto-catalytic reactions of nitrous acid are supposed to play a leading role in low and high concentrations of nitric acid,respectively.Stirring could facilitate the reduction of Pd(II)in relatively low nitric acid concentration(3 mol/L).The value of charge transfer coefficient was determined to be 0.18 for the measurements at 298 K.The diffusion coefficient of Pd(II)increased from 1.89×10 8cm2/s at 288 K to 4.23×10 8cm2/s at 318 K,and the activation energy was calculated to be 21.5 kJ/mol.In electrowinning experiments,SEM images of palladium obtained by electrolysis reveal the dendrite growth in all cases,which is uniform all over the entire surface of Pt electrode.The recovery ratios of Pd at different nitric acid concentrations are high,and the faradic efficiency of electrolysis decreases with increasing the nitric acid concentration.When stirring was introduced during electrolysis,the electrodeposition rate of Pd increased substantially.
