Aging can significantly affect the performance of asphalt mixtures, causing increase in stiffness, reduction in relaxation capability and increase in cracking susceptibility. It is also well known that fundamental vis...Aging can significantly affect the performance of asphalt mixtures, causing increase in stiffness, reduction in relaxation capability and increase in cracking susceptibility. It is also well known that fundamental viscoelastic properties are used for design and modelling of asphalt mixtures and pavement structures to addressing rutting, fatigue and thermal cracking concerns. The objective of this paper is to study how the viscoelastic properties of asphalt mixture change over time, and evaluate and identify the cracking and aging susceptibility of asphalt mixtures with different mix variables during material selection and mixture design. Ten mixtures are evaluated using different laboratory conditioning protocols to simulate a range of aging levels in the field. The complex modulus test is then conducted on the lab aged mixtures to measure the viscoelastic properties in order to construct the dynamic modulus and phase angle master curves. The mixture Glover-Rowe(G-Rm) parameter and the shape parameters of the dynamic modulus and phase angle master curves, including inflection point frequency(-β/γ), difference between the glassy modulus and the inflection point modulus(γ), peak value of phase angle(a) and the horizontal position(frequency) of the peak phase angle value(c), are determined and evaluated for the mixtures with different aging conditions and mix variables. The study indicates the ability of the G-Rmparameter and all the master curve shape parameters to capture the effect of different aging conditions on linear viscoelastic mixture properties, as well as the cracking and aging susceptibility of asphalt mixtures.展开更多
With the popularization of friction stir welding(FSW),5083-H321 and 6061-T6 aluminum alloy materials are widely used during the FSW process.In this study,the fatigue life of friction stir welding with two materials,i....With the popularization of friction stir welding(FSW),5083-H321 and 6061-T6 aluminum alloy materials are widely used during the FSW process.In this study,the fatigue life of friction stir welding with two materials,i.e.,5083-H321 and 6061-T6 aluminum alloy,are studied.Fatigue tests were carried out on the base metal of these two materials as well as on the butt joints and overlapping FSW samples.The principle of the equivalent structural stress method is used to analyze the FSW test data of these two materials.The fatigue resistances of these two materials were com-pared and a unified principal S-N curve equation was fitted.Two key parameters of the unified principal S-N curve obtained by fitting,Cd is 4222.5,and h is 0.2693.A new method for an FSW fatigue life assessment was developed in this study and can be used to calculate the fatigue life of different welding forms with a single S-N curve.Two main fatigue tests of bending and tension were used to verify the unified principal S-N curve equation.The results show that the fatigue life calculated by the unified mean 50%master S-N curve parameters are the closest to the fatigue test results.The reliability,practicability,and generality of the master S-N curve fitting parameters were verified using the test data.The unified principal S-N curve acquired in this study can not only be used in aluminum alloy materials but can also be applied to other materials.展开更多
基金New Hampshire Department of Transportation for sponsoring this study。
文摘Aging can significantly affect the performance of asphalt mixtures, causing increase in stiffness, reduction in relaxation capability and increase in cracking susceptibility. It is also well known that fundamental viscoelastic properties are used for design and modelling of asphalt mixtures and pavement structures to addressing rutting, fatigue and thermal cracking concerns. The objective of this paper is to study how the viscoelastic properties of asphalt mixture change over time, and evaluate and identify the cracking and aging susceptibility of asphalt mixtures with different mix variables during material selection and mixture design. Ten mixtures are evaluated using different laboratory conditioning protocols to simulate a range of aging levels in the field. The complex modulus test is then conducted on the lab aged mixtures to measure the viscoelastic properties in order to construct the dynamic modulus and phase angle master curves. The mixture Glover-Rowe(G-Rm) parameter and the shape parameters of the dynamic modulus and phase angle master curves, including inflection point frequency(-β/γ), difference between the glassy modulus and the inflection point modulus(γ), peak value of phase angle(a) and the horizontal position(frequency) of the peak phase angle value(c), are determined and evaluated for the mixtures with different aging conditions and mix variables. The study indicates the ability of the G-Rmparameter and all the master curve shape parameters to capture the effect of different aging conditions on linear viscoelastic mixture properties, as well as the cracking and aging susceptibility of asphalt mixtures.
基金Supported by Department of Education of Liaoning Province(Grant No.JDL2020019)Dalian High Level Talents Project(Grant No.2017RQ132).
文摘With the popularization of friction stir welding(FSW),5083-H321 and 6061-T6 aluminum alloy materials are widely used during the FSW process.In this study,the fatigue life of friction stir welding with two materials,i.e.,5083-H321 and 6061-T6 aluminum alloy,are studied.Fatigue tests were carried out on the base metal of these two materials as well as on the butt joints and overlapping FSW samples.The principle of the equivalent structural stress method is used to analyze the FSW test data of these two materials.The fatigue resistances of these two materials were com-pared and a unified principal S-N curve equation was fitted.Two key parameters of the unified principal S-N curve obtained by fitting,Cd is 4222.5,and h is 0.2693.A new method for an FSW fatigue life assessment was developed in this study and can be used to calculate the fatigue life of different welding forms with a single S-N curve.Two main fatigue tests of bending and tension were used to verify the unified principal S-N curve equation.The results show that the fatigue life calculated by the unified mean 50%master S-N curve parameters are the closest to the fatigue test results.The reliability,practicability,and generality of the master S-N curve fitting parameters were verified using the test data.The unified principal S-N curve acquired in this study can not only be used in aluminum alloy materials but can also be applied to other materials.