A brand new direct and adaptive slicing approach is proposed, which canapparently improve the part accuracy and reduce the building time. At least two stages are includedin this operation: getting the crossing contour...A brand new direct and adaptive slicing approach is proposed, which canapparently improve the part accuracy and reduce the building time. At least two stages are includedin this operation: getting the crossing contour of the cutting plane with the solid part anddetermining the layer thickness. Apart from usual SPI algorithm, slicing of the solid model has itsspecial requirements. Enabling the contour line segments of the cross-section as long as possible isone of them, which is for improving manufacturing efficiency and is reached by adaptively adjustingthe step direction and the step size at every crossing point to obtain optimized secant height. Thelayer thickness determination can be divided into two phases: the geometry-based thicknessestimation and the material-based thickness verifying. During the former phase, the geometrytolerance is divided into two parts: a variety of curves are approximated by a circular arc, whichintroduces the first part, and the deviation error between the contour line in LM process and thecircular arc generates the second part. The latter phase is mainly verifying the layer thicknessestimated in the former stage and determining a new one if necessary. In addition, an example usingthis slicing algorithm is also illustrated.展开更多
This paper examines the experimental study on influence of material component to non-linear relation between sediment yield and drainage network development completed in the Lab. The area of flume drainage system is 8...This paper examines the experimental study on influence of material component to non-linear relation between sediment yield and drainage network development completed in the Lab. The area of flume drainage system is 81.2 m2, the longitudinal gradient and cross section slope are from 0.0348 to 0.0775 and from 0.0115 to 0.038, respectively. Different model materials with a medium diameter of 0.021 mm, 0.076 mm and 0.066 mm cover three experiments each. An artificial rainfall equipment is a sprinkler-system composed of 7 downward nozzles, distributed by hexagon type and a given rainfall intensity is 35.56 mm/hr.cm2. Three experiments are designed by process-response principle at the beginning the ψ shaped small network is dug in the flume. Running time spans are 720 m, 1440 minutes and 540 minutes for Runs I, IV and VI, respectively. Three experiments show that the sediment yield processes are characterized by delaying with a vibration. During network development the energy of a drainage system is dissipated by two ways, of which one is increasing the number of channels (rill and gully), and the other one is enlarging the channel length. The fractal dimension of a drainage network is exactly an index of energy dissipation of a drainage morphological system. Change of this index with time is an unsymmetrical concave curve. Comparison of three experiments explains that the vibration and the delaying ratio of sediment yield processes increase with material coarsening, while the number of channel decreases. The length of channel enlarges with material fining. There exists non-linear relationship between fractal dimension and sediment yield with an unsymmetrical hyperbolic curve. The absolute value of delaying ratio of the curve reduces with time running and material fining. It is characterized by substitution of situation to time.展开更多
This paper deals with an analytical model of thermal stresses which originate during a cooling process of an anisotropic solid continuum with uniaxial or triaxial anisotropy. The anisotropic solid continuum consists o...This paper deals with an analytical model of thermal stresses which originate during a cooling process of an anisotropic solid continuum with uniaxial or triaxial anisotropy. The anisotropic solid continuum consists of anisotropic spherical particles periodically distributed in an anisotropic infinite matrix. The particles are or are not embedded in an anisotropic spherical envelope, and the infinite matrix is imaginarily divided into identical cubic cells with central particles. The thermal stresses are thus investigated within the cubic cell. This mulfi-particle-（envelope）-matrix system based on the cell model is applicable to two- and three-component materials of precipitate-matrix and precipitate-envelope-matrix types, respectively. Finally, an analysis of the determination of the thermal stresses in the multi-par- ticle-（envelope）-matrix system which consists of isotropic as well as uniaxial- and/or triaxial-anisotropic components is presented. Additionally, the thermal-stress induced elastic energy density for the anisotropic components is also derived. These analytical models which are valid for isotropic, anisotropic and isotropic-anisotropic multi-particle- （envelope）-matrix systems represent the determination of important material characteristics. This analytical determination includes： （1） the determination of a critical particle radius which defines a limit state regarding the crack initiation in an elastic, elastic-plastic and plastic components; （2） the determination of dimensions and a shape of a crack propagated in a ceramic components; （3） the determination of an energy barrier and micro-/macro-strengthening in a component; and （4） analytical-（experimental）-computational methods of the lifetime prediction. The determination of the thermal stresses in the anisotropic components presented in this paper can be used to determine these material characteristics of real two- and three-component materials with anisotropic components or with anisotropic and isotropic components.展开更多
Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of persona...Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.展开更多
The authors will focus on the study of the design of Multiprocessor Systems on Chip （MPSoC）, specifically in the context of improving the performance of applications located on the MPSoC architecture. The objective ...The authors will focus on the study of the design of Multiprocessor Systems on Chip （MPSoC）, specifically in the context of improving the performance of applications located on the MPSoC architecture. The objective of this research is to study the problems of transition from a pure software implementation for an embodiment admitting one or more hardware components and to develop a methodology for automatic generation of migration of a software task into a hardware component in MPSoC. The transformation of a software task into a hardware task led to many changes, hardware part （connection, the requirement of an interrupt controller...）, software part （at least one task, I/O （I/O）, synchronization...） and an architectural point of view, the remarkable aspects of data storage. The experiment is done on the MJPEG decoder to illustrate the effectiveness of the authors＇ tool for automatic generation of migration.展开更多
The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal compone...The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements.展开更多
Compared with conventional electric power generation systems, the solid oxide fuel cell （SOFC） has many advantages because of its unique features. High temperature SOFC has been successfully developed to its commerc...Compared with conventional electric power generation systems, the solid oxide fuel cell （SOFC） has many advantages because of its unique features. High temperature SOFC has been successfully developed to its commercial applications, but it still faces many problems which hamper large-scale commercial applications of SOFC. To reduce the cost of SOFC, intermediate temperature solid oxide fuel cell （IT-SOFC） is presently under rapid development. The status of IT-SOFC was reviewed with emphasis on discussion of their component materials. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
To improve the mechanical properties and durability of the cement-stabilized base,rubber particles of three different sizes and with three different contents were optimally selected,the evolution laws of the mechanica...To improve the mechanical properties and durability of the cement-stabilized base,rubber particles of three different sizes and with three different contents were optimally selected,the evolution laws of the mechanical strength and toughness of rubber-particle cement-stabilized gravel(RCSG)under different schemes were determined,and the optimal particle size and content of rubber particles were obtained.On this basis,the durability of the RCSG base was clarified.The results show that with an increase in the rubber particle size and content,the mechanical strength of RCSG gradually decreased,whereas the toughness and transverse deformation ability gradually increased.1%content and 2–4 mm sized RCSG can better balance the relationship between mechanical strength and toughness.The 7 d unconfined compressive strength was 17.7%higher than that of the 4–8 mm RCSG.The 28 d toughness index and ultimate splitting strain can be increased by 9.8%and 6.3 times,respectively,compared with ordinary cement-stabilized gravel(CSG).In terms of durability,compared with CSG,RCSG showed a 3.7%increase in the water stability property of cement-stabilized base with 1%content and 2–4 mm rubber particles,5.5%increase in the frozen coefficient,and 80.6%and 37.9%increase in the fatigue life at 0.70 and 0.85 stress ratio levels,respectively.展开更多
基金This project is supported by National Natural Science Foundation of China (No.59975015, No.50275018) Doctoral Foundation of Ministry of Edu-cation of China (No.1999014102).
文摘A brand new direct and adaptive slicing approach is proposed, which canapparently improve the part accuracy and reduce the building time. At least two stages are includedin this operation: getting the crossing contour of the cutting plane with the solid part anddetermining the layer thickness. Apart from usual SPI algorithm, slicing of the solid model has itsspecial requirements. Enabling the contour line segments of the cross-section as long as possible isone of them, which is for improving manufacturing efficiency and is reached by adaptively adjustingthe step direction and the step size at every crossing point to obtain optimized secant height. Thelayer thickness determination can be divided into two phases: the geometry-based thicknessestimation and the material-based thickness verifying. During the former phase, the geometrytolerance is divided into two parts: a variety of curves are approximated by a circular arc, whichintroduces the first part, and the deviation error between the contour line in LM process and thecircular arc generates the second part. The latter phase is mainly verifying the layer thicknessestimated in the former stage and determining a new one if necessary. In addition, an example usingthis slicing algorithm is also illustrated.
基金Joint project by National Natural Science Foundation of China and Ministry of Water Resources of China, No.59890200 National Na
文摘This paper examines the experimental study on influence of material component to non-linear relation between sediment yield and drainage network development completed in the Lab. The area of flume drainage system is 81.2 m2, the longitudinal gradient and cross section slope are from 0.0348 to 0.0775 and from 0.0115 to 0.038, respectively. Different model materials with a medium diameter of 0.021 mm, 0.076 mm and 0.066 mm cover three experiments each. An artificial rainfall equipment is a sprinkler-system composed of 7 downward nozzles, distributed by hexagon type and a given rainfall intensity is 35.56 mm/hr.cm2. Three experiments are designed by process-response principle at the beginning the ψ shaped small network is dug in the flume. Running time spans are 720 m, 1440 minutes and 540 minutes for Runs I, IV and VI, respectively. Three experiments show that the sediment yield processes are characterized by delaying with a vibration. During network development the energy of a drainage system is dissipated by two ways, of which one is increasing the number of channels (rill and gully), and the other one is enlarging the channel length. The fractal dimension of a drainage network is exactly an index of energy dissipation of a drainage morphological system. Change of this index with time is an unsymmetrical concave curve. Comparison of three experiments explains that the vibration and the delaying ratio of sediment yield processes increase with material coarsening, while the number of channel decreases. The length of channel enlarges with material fining. There exists non-linear relationship between fractal dimension and sediment yield with an unsymmetrical hyperbolic curve. The absolute value of delaying ratio of the curve reduces with time running and material fining. It is characterized by substitution of situation to time.
文摘This paper deals with an analytical model of thermal stresses which originate during a cooling process of an anisotropic solid continuum with uniaxial or triaxial anisotropy. The anisotropic solid continuum consists of anisotropic spherical particles periodically distributed in an anisotropic infinite matrix. The particles are or are not embedded in an anisotropic spherical envelope, and the infinite matrix is imaginarily divided into identical cubic cells with central particles. The thermal stresses are thus investigated within the cubic cell. This mulfi-particle-（envelope）-matrix system based on the cell model is applicable to two- and three-component materials of precipitate-matrix and precipitate-envelope-matrix types, respectively. Finally, an analysis of the determination of the thermal stresses in the multi-par- ticle-（envelope）-matrix system which consists of isotropic as well as uniaxial- and/or triaxial-anisotropic components is presented. Additionally, the thermal-stress induced elastic energy density for the anisotropic components is also derived. These analytical models which are valid for isotropic, anisotropic and isotropic-anisotropic multi-particle- （envelope）-matrix systems represent the determination of important material characteristics. This analytical determination includes： （1） the determination of a critical particle radius which defines a limit state regarding the crack initiation in an elastic, elastic-plastic and plastic components; （2） the determination of dimensions and a shape of a crack propagated in a ceramic components; （3） the determination of an energy barrier and micro-/macro-strengthening in a component; and （4） analytical-（experimental）-computational methods of the lifetime prediction. The determination of the thermal stresses in the anisotropic components presented in this paper can be used to determine these material characteristics of real two- and three-component materials with anisotropic components or with anisotropic and isotropic components.
文摘Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.
文摘The authors will focus on the study of the design of Multiprocessor Systems on Chip （MPSoC）, specifically in the context of improving the performance of applications located on the MPSoC architecture. The objective of this research is to study the problems of transition from a pure software implementation for an embodiment admitting one or more hardware components and to develop a methodology for automatic generation of migration of a software task into a hardware component in MPSoC. The transformation of a software task into a hardware task led to many changes, hardware part （connection, the requirement of an interrupt controller...）, software part （at least one task, I/O （I/O）, synchronization...） and an architectural point of view, the remarkable aspects of data storage. The experiment is done on the MJPEG decoder to illustrate the effectiveness of the authors＇ tool for automatic generation of migration.
基金Funded by the National Natural Science Foundation of China(Nos.51408287 and 51668038)the Rolls Supported by Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R29)+2 种基金the Distinguished Young Scholars Fund of Gansu Province(1606RJDA318)the Natural Science Foundation of Gansu Province(1506RJZA064)the Excellent Program of Lanzhou Jiaotong University(201606)
文摘The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements.
基金the National Basic Research Program of China(No.2007CB936201)the National High Technology Research and Development Program of China(863 Program)(No.2006AAO3Z351)the Major International(Regional)Joint Research Program of China(No.50620120439,2006DFB51000).
文摘Compared with conventional electric power generation systems, the solid oxide fuel cell （SOFC） has many advantages because of its unique features. High temperature SOFC has been successfully developed to its commercial applications, but it still faces many problems which hamper large-scale commercial applications of SOFC. To reduce the cost of SOFC, intermediate temperature solid oxide fuel cell （IT-SOFC） is presently under rapid development. The status of IT-SOFC was reviewed with emphasis on discussion of their component materials. 2008 University of Science and Technology Beijing. All rights reserved.
基金supported by the Innovation Capability Support Program of Shaanxi(No.2022TD-07).
文摘To improve the mechanical properties and durability of the cement-stabilized base,rubber particles of three different sizes and with three different contents were optimally selected,the evolution laws of the mechanical strength and toughness of rubber-particle cement-stabilized gravel(RCSG)under different schemes were determined,and the optimal particle size and content of rubber particles were obtained.On this basis,the durability of the RCSG base was clarified.The results show that with an increase in the rubber particle size and content,the mechanical strength of RCSG gradually decreased,whereas the toughness and transverse deformation ability gradually increased.1%content and 2–4 mm sized RCSG can better balance the relationship between mechanical strength and toughness.The 7 d unconfined compressive strength was 17.7%higher than that of the 4–8 mm RCSG.The 28 d toughness index and ultimate splitting strain can be increased by 9.8%and 6.3 times,respectively,compared with ordinary cement-stabilized gravel(CSG).In terms of durability,compared with CSG,RCSG showed a 3.7%increase in the water stability property of cement-stabilized base with 1%content and 2–4 mm rubber particles,5.5%increase in the frozen coefficient,and 80.6%and 37.9%increase in the fatigue life at 0.70 and 0.85 stress ratio levels,respectively.
