Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary ...Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvesting, the timely application of nitrogen fertilizer is fundamental,coupled with moderate field drying for root-vigor preservation and tiller promotion before and after the mechanical harvesting of the main crop.展开更多
Purpose-This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.Design/methodology/approach-First,taking the Liuyuan Tunnel of Huangg...Purpose-This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.Design/methodology/approach-First,taking the Liuyuan Tunnel of Huanggang-Huangmei High-Speed Railway as an example and taking deflection of the third principal stress of the surrounding rock at a vault after tunnel excavation as the criterion,the critical buried depth of the large section tunnel was determined.Then,the strength reduction method was employed to calculate the tunnel safety factor under different rock classes and thickness-span ratios,and mathematical statistics was conducted to identify the relationships of the tunnel safety factor with the thickness-span ratio and the basic quality(BQ)index of the rock for different rock classes.Finally,the influences of thickness-span ratio,groundwater,initial stress of rock and structural attitude factors were considered to obtain the corrected BQ,based on which the stability of a large cross-section tunnel with a depth of more than 100 m during mechanized operation was analyzed.This evaluation method was then applied to Liuyuan Tunnel and Cimushan No.2 Tunnel of Chongqing Urban Expressway for verification.Findings-This study shows that under different rock classes,the tunnel safety factor is a strict power function of the thickness-span ratio,while a linear function of the BQ to some extent.It is more suitable to use the corrected BQ as a quantitative index to evaluate tunnel stability according to the actual conditions of the site.Originality/value-The existing industry standards do not consider the influence of buried depth and span in the evaluation of tunnel stability.The stability evaluation method of large section tunnel considering the correction of overburden span ratio proposed in this paper achieves higher accuracy for the stability evaluation of surrounding rock in a full or large-section mechanized excavation of double line high-speed railway tunnels.展开更多
Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new de...Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.展开更多
Fully mechanized solid backfill mining(FMSBM) technology adopts dense backfill body to support the roof. Based on the distinguishing characteristics and mine pressure control principle in this technology, the basic pr...Fully mechanized solid backfill mining(FMSBM) technology adopts dense backfill body to support the roof. Based on the distinguishing characteristics and mine pressure control principle in this technology, the basic principles and methods for mining pressure monitoring were analyzed and established. And the characteristics of overburden strata movement were analyzed by monitoring the support resistance of hydraulic support, the dynamic subsidence of immediate roof, the stress of backfill body, the front abutment pressure, and the mass ratio of cut coal to backfilled materials. On-site strata behavior measurements of 7403 W solid backfilling working face in Zhai Zhen Coal Mine show that the backfill body can effectively support the overburden load, obviously control the overburden strata movement, and weaken the strata behaviors distinctly. Specific performances are as follows. The support resistance decreases obviously; the dynamic subsidence of immediate roof keeps consistent to the variation of backfill body stress, and tends to be stable after the face retreating to 120-150 m away from the cut. The peak value of front abutment pressure arises at 5-12 m before the operating face, and mass ratio is greater than the designed value of 1.15, which effectively ensures the control of strata movement. The research results are bases for intensively studying basic theories of solid backfill mining strata behaviors and its control, and provide theoretical guidance for engineering design in FMSBM.展开更多
Wall-mounted swirling ventilation is a new type of system in mechanized excavation faces with a dust sup-pression performance that is closely related to the blowing-to-suction flow ratio.Physical and simulation models...Wall-mounted swirling ventilation is a new type of system in mechanized excavation faces with a dust sup-pression performance that is closely related to the blowing-to-suction flow ratio.Physical and simulation models were developed according to the No.C103 mechanized excavation face in the Nahe Coal Mine of the Baise Mining Bureau,Guangxi Province to optimize the blowing-to-suction flow ratio for wall-mounted swirling ventilation.Both the k-εturbulence model and the discrete phase model were utilized to simulate airflow field structures and dust concentration distribution patterns at various blowing-to-suction flow ratios.The results suggest that higher blowing-to-suction flow ratios increase the airflow field disturbance around the working face and weaken the intensity of the axial air curtain.On the other hand,both the intensity of the radial air curtain and the dust suppression effect are enhanced.At a blowing-to-suction flow ratio of 0.8,the wall-mounted swirling ventilation system achieved the most favorable dust suppression performance.Both the total dust and respirable dust had their lowest concentrations with maximum efficiencies of reducing both types at 90.33%and 87.16%,respectively.展开更多
Taking Zhongyu 3 as the experimental variety,this paper analyzed the effects of different sowing depths(5 cm and 8 cm)and sowing equipment(ZHSB-10 medium-sized sowing machine and 2B-2 small sowing machine)on the growt...Taking Zhongyu 3 as the experimental variety,this paper analyzed the effects of different sowing depths(5 cm and 8 cm)and sowing equipment(ZHSB-10 medium-sized sowing machine and 2B-2 small sowing machine)on the growth,yield and components of yield of mechanized sowing maize,to provide references for mechanized maize production in southwest ecological zone.The results showed that the germination rate,plant height uniformity,and most agronomic traits of maize plant were higher at the sowing depth of 5 cm;with the growth of the maize,the effects of the sowing depth on agronomic traits of maize gradually declined;the effects of the sowing depth on the empty stalk rate,double ear rate,lodging rate,and lodging and stem broken rate were smaller;the sowing depth of 5 cm could increase the yield of mechanized sowing maize and most yield traits of maize.Different sowing machines had smaller effects on the germination rate,plant height uniformity,and agronomic traits of all growth stages,empty stalk rate,double ear rate,lodging rate,lodging and stem broken rate,yield,and components of yield of mechanized sowing maize.展开更多
Based on the fluid mechanics and mass transfer theory,a mathematical model of the spatial-temporal variation of gas was derived to avoid the gas accident caused by the main fan stopping ventilation under the condition...Based on the fluid mechanics and mass transfer theory,a mathematical model of the spatial-temporal variation of gas was derived to avoid the gas accident caused by the main fan stopping ventilation under the condition of intermittent ventilation in the tunnel.According to the actual parameters of the tunnel,a numerical calculation model was established.The spatial-temporal variation of gas concentration in the fully mechanized working face under the condition of intermittent ventilation was calculated by using the commercial package Fluent,and the correctness of the calculated results was verified by the actual monitoring data of the mine.Firstly,the gas concentration was calculated under different wind velocities at driving face in coal tunnel,and the result showed that the gas can be carried effectively by the wind when the wind velocity is about 1.8 m/s.Secondly,the distributions of wind velocity and gas concentration at driving face were studied at 1.8 m/s,and the result showed the gas concentration increased gradually with the distance close to the outlet,but the gas concentration almost kept constant at the height of driving face.Thirdly,the distribution of gas concentration was investigated with time after the ventilation was stopped and restarted,respectively.The gas concentration of test point gradually increased with the increment of downtime,when the downtime was 40 min,the gas concentration of test point 3 reached the maximum value.The gas concentration increased gradually and reached the maximum after10 min of restart,then sharply decreased and kept constant.展开更多
The stability control of gob-side entry retaining in fully mechanized caving face is a typical challenge in many coal mines in China.The rotation and subsidence of the lateral cantilever play a critical role in a coal...The stability control of gob-side entry retaining in fully mechanized caving face is a typical challenge in many coal mines in China.The rotation and subsidence of the lateral cantilever play a critical role in a coal mine,possibly leading to instability in a coal seam wall or a gob-side wall due to its excessive rotation subsidence.Hence,the presplitting blasting measures in the roof was implemented to cut down the lower main roof and convert it to caved immediate roof strata,which can significantly reduce the rotation space for the lateral cantilever and effectively control its rotation.Firstly,the compatible deformation model was established to investigate the quantitative relationship between the deformation of the coal seam wall and the gob-side wall and the subsidence of the lateral cantilever.Then,the instability judgments for the coal seam wall and gob-side wall were revealed,and the determination method for the optimal roof cutting height were obtained.Furthermore,The Universal Distinct Element Code numerical simulation was adopted to investigate the effect of roof-cutting height on the stability of the retained entry.The numerical simulation results indicated that the deformation of the roadway could be effectively controlled when the roofcutting height reached to 18 m,which verified the theoretical deduction well.Finally,a field application was performed at the No.3307 haulage gateway in the Tangan coal mine,Ltd.,Shanxi Province,China.The field monitoring results showed that the blasting roof cutting method could effectively control the large deformation of surrounding rocks,which provided helpful references for coal mine safety production under similar conditions.展开更多
It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution i...It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution in the coal body and the corresponding lump coal formation mechanism,was performed in PFC2D.Moreover,a correlation was established between the cutting force and lump coal formation,and a statistical analysis method was proposed to determine the lump coal rate.The following conclusions are drawn from the results:(1)Based on a soft ball model,a coal wall cutting model is established.By setting the roller parameters based on linear bonding and simulating the roller cutting process of the coal body,the coal wall cutting process is effectively simulated,and accurate lump coal rate statistics are provided.(2)Under the cutting stress,the coal body in the working face underwent three stages—microfracture generation,fracture expansion,and fracture penetration—to form lump coal,in which the fracture direction is orthogonal to the cutting pressure chain.Within a certain range from the roller,as the cutting depth of the roller increased,the number of new fractures in the coal body first increases and then stabilizes.(3)Under the cutting stress,the fractured coal body is locally compressed,thereby forming a compact core.The formation and destruction of the compact core causes fluctuations in the cutting force.The fluctuation amplitude is positively related to the coal mass.(4)Because the simulation does not consider secondary damage in the coal,the simulated lump coal rate is larger than the actual lump coal rate in the working face;this deviation is mainly concentrated in large lump coal with a diameter greater than 300 mm.展开更多
[Objectives]To study the breeding of a new sugarcane variety Yuetang 08776 suitable for mechanized production.[Methods]With Yuetang 96-86 as the female parent and Yuetang 99-66 as the male parent,Yuetang 08776 was bre...[Objectives]To study the breeding of a new sugarcane variety Yuetang 08776 suitable for mechanized production.[Methods]With Yuetang 96-86 as the female parent and Yuetang 99-66 as the male parent,Yuetang 08776 was bred by the Bioengineering Institute of Guangdong Academy of Sciences.It was approved as a non-major crop variety by the Ministry of Agriculture and Rural Affairs in December,2019.Through many years of multi-pilot trials,the characters,traits and disease resistance of Yuetang 08776 were investigated,and the key points of its cultivation technique were summarized.[Results]Yuetang 08776 is characterized by medium maturity,high sugar content,high and stable yield,strong cold and drought resistance,large number of effective stems,strong ratooning ability and lodging resistance.Yuetang 08776 has excellent agronomic traits,and has been identified as moderately resistant to smut and mosaic disease.The average cane yield of Yuetang 08776 was 119.89 t/ha,18.50 t/ha higher than that of CK,an increase of 18.25%.The average sugar yield was 17.15,2.11 t/ha higher than that of CK,an increase of 14.03%.The average sucrose content of Yuetang 08776 in the early period(November to December)was 13.20%,0.71 percentage points lower than that of CK;in the middle and late period(January to March of the following year),the average sucrose content was 15.23%,0.22 percentage points lower than that of CK;and the average sucrose content of the whole period was 14.21%,0.47 percentage points lower than that of CK.[Conclusions]Yuetang 08776 is a sugarcane variety with medium maturity,high sugar,high and stable yield,strong resistance and good ratooning.It is suitable for mechanized seeding,management and harvesting,and suitable for planting and popularizing in most sugarcane production areas of Guangdong,Guangxi and Yunnan.展开更多
The number workable days (NWD) for agricultural field operations is of great importance for sizing agricultural machinery fleets. This is especially pivotal for sugarcane harvest, which extends from 8 to 10 months/yea...The number workable days (NWD) for agricultural field operations is of great importance for sizing agricultural machinery fleets. This is especially pivotal for sugarcane harvest, which extends from 8 to 10 months/year. In light of this, the current study aimed at defining criteria for obtaining the NWD for rational sugarcane harvest at different sites in the state of São Paulo, southern Brazil, taking into account both a general and a specific criteria. For this purpose, data from harvest interruption of 30 sugar mills in southern Brazil throughout periods ranging from two to five years were used. The following variables were tested as criteria for defining harvest interruption: minimum precipitation (PREC);soil water holding capacity (SWHC);and the limit of the ratio between actual soil moisture (SM) and SWHC. Based on such a specific criterion ascribed to each site along with a general criterion, NWD maps were prepared for the state of São Paulo, Brazil. The results showed that there were variations from the definition criteria of NWD at the different sites in the state. However, the use of a general criterion for harvest interruption, based on PREC ≥ 3 mm, SWHC = 40 mm and SM/SWHC ≥ 90%, provided accurate results. During the validation of these criteria, the NWD maps generated from the individual criterion proposed for each site resulted in an average error of 24.9 days/year, whereas the map generated from the general criterion culminated in an average error of 4.4 days/year.展开更多
[Objectives] This study was conducted to explore the effect of machine harvesting on ratooning ability of Guitang 47, and to provide basis for mechanized production of Guitang 47. [Methods] On the basis of mechanized ...[Objectives] This study was conducted to explore the effect of machine harvesting on ratooning ability of Guitang 47, and to provide basis for mechanized production of Guitang 47. [Methods] On the basis of mechanized planting and management of newly planted sugarcane Guitang 47, a comparative test of machine harvesting and manual harvesting was conducted, during which the plant generation rate, sugarcane yield, sucrose content and related agronomic traits of ratoon cane were continuously investigated in two years after machine harvesting of the newly planted sugarcane. [Results] There were no significant differences in the plant generation rate, plant height, stalk diameter, millable cane, sugarcane yield and sucrose content from manual harvesting of Guitang 47 in the first and second years after machine harvesting. In the second year after machine harvesting, the yields of ratoon cane and the sugar content reached 101.70 and 15.32 t/hm^2, respectively, which were equivalent to those of manual harvesting. [Conclusions] Guitang 47 has strong ratooning ability and lodging resistance and strong resistance to rolling and crushing, and is adaptive to full mechanized production. It should be promoted and accelerated in sugarcane areas lacking labor to reduce costs and increase benefits.展开更多
To keep coal workers away from the hazardous area with frequent accidents such as the roof fall and rib spalling in an underground coalmine,we put forward the solution with robotized self-moving anchor-supporting unit...To keep coal workers away from the hazardous area with frequent accidents such as the roof fall and rib spalling in an underground coalmine,we put forward the solution with robotized self-moving anchor-supporting unit.The existing research shows that the surrounding rock of the roadway has self-stability,and the early or late support is not conducive to the safe and reliable support of the roadway,so there is a problem of support opportunity.In order to study the supporting effect and the optimal supporting time of the above solution,we established the mechanical coupling model of surrounding rock and advance support,and investigated the surrounding rock deformation and advance support pressure distribution under different reserved roof subsidence by using the numerical simulation software FLAC3D.The results show that the deformation of surrounding rock increases and finally tends to a stable level with the increase of pre settlement of roadway roof,and when the pre settlement of roof is between 8-15 mm,the vertical pressure of the top beam of advance support reaches the minimum value,about 0.58 MPa.Based on the above research,we put forward the optimum supporting time in roadway excavation,and summarized the evaluation method based on the mechanical coupling model of surrounding rock-advance support.展开更多
Sugarcane is a major Brazilian agricultural product. The area cultivated in the state of Rio de Janeiro for the 2011-12 crop was of 41.31 thousand hectares. The process of mechanized harvesting of the crop still has m...Sugarcane is a major Brazilian agricultural product. The area cultivated in the state of Rio de Janeiro for the 2011-12 crop was of 41.31 thousand hectares. The process of mechanized harvesting of the crop still has many visible losses of raw materials caused by several factors. This study aimed at evaluating the visible losses of sugarcane and ratoon damage using the Case A4000 harvester and was conducted in the municipality of Campos dos Goytacazes, in the state of Rio de Janeiro, Brazil. The materials left on the field by the harvester were collected in six ratoon cane rows, with a length of 350 m, setting the frame sampling to every 50 m. The sampling area consisted of 20 m2, with eight repetitions. The losses were calculated in t·ha-1 and in %. The comparison of averages was performed by using the confidence interval, constructed by statistical “t” at 5% probability to compare the types of losses. The estimated productivity of the area was of 54 t·ha-1. The differences between the types of losses were significant. The billets and splinters were found in greater quantity.展开更多
Yield loss(Y_(Loss)) in the ratoon crop due to crushing damage to left stubble from mechanical harvesting of the main crop is a constraint for wide adoption of mechanized rice ratooning technology.Soil drying before t...Yield loss(Y_(Loss)) in the ratoon crop due to crushing damage to left stubble from mechanical harvesting of the main crop is a constraint for wide adoption of mechanized rice ratooning technology.Soil drying before the harvest of the main crop has been proposed to overcome this problem.The objective of this study was to determine the effect of soil drying during the mid-to-late grain filling stage of the main crop on grain yield of the ratoon crop in a mechanized rice ratooning system.Field experiments were conducted to compare Y_(Loss) between light(LD) and heavy(HD) soil drying treatments in Hubei province,central China in 2017 and 2018.Y_(Loss) was calculated as the percentage of yield reduction in the ratoon crop with the main crop harvested mechanically,relative to the grain yield of the ratoon crop with the main crop harvested manually.In comparison with LD,soil hardness was increased by 42.8%-84.7% in HD at the 5-20 cm soil depth at maturity of the main crop.Soil hardness at 5 and 10 cm depths reached respectively 4.05 and 7.07 kg cm^(-2) in HD.Soil drying treatment did not significantly affect the grain yield of the main crop.Under mechanical harvesting of the main crop,HD increased the grain yield of the ratoon crop by 9.4% relative to LD.Consequently,Y_(Loss) was only 3.4% in HD,in contrast to 16.3% in LD.The differences in grain yield and Y_(Loos) between the two soil drying treatments were explained mainly by panicles m^(-2),which was increased significantly by HD in the track zone of the ratoon crop compared with LD.These results suggest that heavy soil drying practice during the mid-to-late grain filling stage of the main crop is effective for reducing Y_(Loss) of the ratoon crop in a mechanized rice ratooning system.展开更多
Mechanical hill wet-seeded rice machine is beneficial for establishing and growing uniform rows of seedlings.However,there is limited knowledge regarding the effects of the establishment of furrows on growth,lodging a...Mechanical hill wet-seeded rice machine is beneficial for establishing and growing uniform rows of seedlings.However,there is limited knowledge regarding the effects of the establishment of furrows on growth,lodging and yield,and their relationships with root traits.In this study,field experiments were conducted during 2012 and 2013 using two super rice varieties(hybrid rice Peizataifeng and inbred rice Yuxiangyouzhan)under three furrow establishment treatments(T1,both water and seed furrows were established by the machine;T2,only seed furrows were established by the machine;and T3,neither water nor seed furrows were established by the machine).Lodging index,lodging-related traits,grain yield,above-ground dry weight and root traits were measured.The results showed that the lodging index was significantly affected by the treatments with furrows(T1 and T2).The strongest lodging resistance was detected in the mechanical hill wet-seeded rice with furrow treatment(T1)in both 2012 and 2013.Lodging resistance was strongly related to the breaking resistance.No significant difference was found in grain yield or dry weight of the mechanical hill wet-seeded rice.Therefore,the mechanical hill wet-seeded rice with furrow treatment increased rice lodging resistance,which was related to root traits.展开更多
This study aimed at quantitatively evaluating the sugarcane losses and the damage caused to the ratoon cane while using the Case IH A8800 harvester in different displacement speeds;it was conducted in the municipality...This study aimed at quantitatively evaluating the sugarcane losses and the damage caused to the ratoon cane while using the Case IH A8800 harvester in different displacement speeds;it was conducted in the municipality of Campos dos Goytacazes, in Rio de Janeiro, Brazil. Three speeds were used as treatment (2 km·h-1, 3 km·h-1, and 4.5 km·h-1), and each treatment was composed of six rows of harvested ratoon, each with a length of 290 m. In order to evaluate the quantitative losses in t·ha-1 and the percentage of losses, the remaining sugarcane, left on the field after harvesting, was collected. The sampling frame was set to every 50 m, dividing the borders by 40 m;the measurement for each sampling area was of 20 m2, with five repetitions. In order to evaluate the damage caused to the ratoon canes, we chose a visual methodology to classify the damage degrees, ranging from one to four. There was no significant difference in losses when comparing different speeds. Therefore, it is more advantageous and economically viable to use the speed of 4.5 km·h-1, which collects more in less time.展开更多
The mechanized large-ridge production technology of potato was summarized,including preparation before sowing,deep tillage and land preparation,deep application of chemical fertilizer,sowing,intertillage,disease and p...The mechanized large-ridge production technology of potato was summarized,including preparation before sowing,deep tillage and land preparation,deep application of chemical fertilizer,sowing,intertillage,disease and pest control,harvesting and other related contents.The comparative experimental study of large ridge and small ridge modes focused on the effects of ridge spacing on soil bulk density,temperature,water retention,crop growth and yield.The technology has the advantages of time saving,labor saving,seed saving,and fertilizer saving.It can significantly improve production efficiency,and is a high-yield and high-efficiency planting mode that increases potato yield.This model can increase yield by 370 kg/hm 2 and improve income by 160 yuan/hm 2.The results of this study have greatly promoted the promotion and application of mechanized largo-ridge potato planting technology.展开更多
This paper standardizes the operation of rapeseed production including variety choosing,field preparation,mechanical seeding,field management,mechanical harvesting etc.,to realize full mechanization of rapeseed produc...This paper standardizes the operation of rapeseed production including variety choosing,field preparation,mechanical seeding,field management,mechanical harvesting etc.,to realize full mechanization of rapeseed production. The key technologies: the optimum sowing date was from mid-September to mid-October in rapeseed-rice（corn） double cropping system region,and from mid-October to late October in rapeseed-rice-rice triple-cropping region; seeding rate was 4. 5 kg/ha-6. 0 kg/ha; the optimum density was 450000-750000 plants per ha;150-240 kg N fertilizer,60-90 kg P2O5 fertilizer,90-135 kg K2O fertilizer and 7. 5-15 kg B fertilizer were used per ha,50% of N fertilizer and the rest of fertilizer were used as basal fertilizer; segmented harvesting was done when 70%-80% of siliques per plant was yellow and combined harvesting was done when more than 90% of siliques per plant was yellow or brown.展开更多
Mechanized harvesting technologies with shaking systems for fruit industry have been widely investigated and significantly developed over the past several decades which were presented by a large amount of literature.T...Mechanized harvesting technologies with shaking systems for fruit industry have been widely investigated and significantly developed over the past several decades which were presented by a large amount of literature.This paper reviews the research and development progress of mechanized harvesting of fruits systematically with a focus on the theoretical study,fruit crop variety,shaking system categories,abscission chemical agents,and their actual applications.Based on the comprehensive review,mechanized harvesting systems for different fruit crops appear multifarious shaking modes with various vibratory mechanisms and structural dimensions.Major advantages in the development of fruit mechanical harvesting with effective vibratory patterns and catching frames provide a series of economic and agronomic benefits,such as reducing labor costs,promoting standardized planting,and increasing productivity.However,fruit injury and tree damage are the main reasons why mechanical shaking systems are rarely used for fresh fruit harvesting because of tenderness and frangibility of the fruit crops.Therefore,more efforts should be concentrated on the innovative shake-and-catch system with suitable frequency and amplitude to achieve low fruit damage or even nondestructive harvesting for fresh fruit market.This overview summarized the advantages and bottlenecks of these shaking systems for fruit harvesting and proposed the challenges and some constructive prospective viewpoints aimed at the major issues of mechanical harvesting techniques.In addition,employing sorting technologies to classify the postharvest fruits provide a new direction for the further development of mechanized harvesting in high-value fruit crops,as well as bring more benefits to growers and increase their interest in equipment investment on the mechanical shaking harvester for the fruit industry.展开更多
基金supported by the National Nature Science Foundation of China,the National Key Research and Development Program of China(302001109,2016YFD0300508,2017YFD0301602,2018YFD0301105)the Fujian and Taiwan Cultivation Resources Development and Green Cultivation Coordination Innovation Center,China(Fujian 2011 Project,2015-75)the Natural Science Foundation of Fujian Province,China(2022J01142)。
文摘Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvesting, the timely application of nitrogen fertilizer is fundamental,coupled with moderate field drying for root-vigor preservation and tiller promotion before and after the mechanical harvesting of the main crop.
基金supported by the NSFC HSR Fundamental Research Joint Fund (Grant No.U1934213)。
文摘Purpose-This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.Design/methodology/approach-First,taking the Liuyuan Tunnel of Huanggang-Huangmei High-Speed Railway as an example and taking deflection of the third principal stress of the surrounding rock at a vault after tunnel excavation as the criterion,the critical buried depth of the large section tunnel was determined.Then,the strength reduction method was employed to calculate the tunnel safety factor under different rock classes and thickness-span ratios,and mathematical statistics was conducted to identify the relationships of the tunnel safety factor with the thickness-span ratio and the basic quality(BQ)index of the rock for different rock classes.Finally,the influences of thickness-span ratio,groundwater,initial stress of rock and structural attitude factors were considered to obtain the corrected BQ,based on which the stability of a large cross-section tunnel with a depth of more than 100 m during mechanized operation was analyzed.This evaluation method was then applied to Liuyuan Tunnel and Cimushan No.2 Tunnel of Chongqing Urban Expressway for verification.Findings-This study shows that under different rock classes,the tunnel safety factor is a strict power function of the thickness-span ratio,while a linear function of the BQ to some extent.It is more suitable to use the corrected BQ as a quantitative index to evaluate tunnel stability according to the actual conditions of the site.Originality/value-The existing industry standards do not consider the influence of buried depth and span in the evaluation of tunnel stability.The stability evaluation method of large section tunnel considering the correction of overburden span ratio proposed in this paper achieves higher accuracy for the stability evaluation of surrounding rock in a full or large-section mechanized excavation of double line high-speed railway tunnels.
文摘Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.
基金Project(SKLCRSM12X01)supported by State Key Laboratory of Coal Resources and Safe Mining,China University of Mining&TechnologyProject(2014ZDPY02)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(CXLX13_951)supported by the Research Innovation Program for College Graduates of Jiangsu Province,China
文摘Fully mechanized solid backfill mining(FMSBM) technology adopts dense backfill body to support the roof. Based on the distinguishing characteristics and mine pressure control principle in this technology, the basic principles and methods for mining pressure monitoring were analyzed and established. And the characteristics of overburden strata movement were analyzed by monitoring the support resistance of hydraulic support, the dynamic subsidence of immediate roof, the stress of backfill body, the front abutment pressure, and the mass ratio of cut coal to backfilled materials. On-site strata behavior measurements of 7403 W solid backfilling working face in Zhai Zhen Coal Mine show that the backfill body can effectively support the overburden load, obviously control the overburden strata movement, and weaken the strata behaviors distinctly. Specific performances are as follows. The support resistance decreases obviously; the dynamic subsidence of immediate roof keeps consistent to the variation of backfill body stress, and tends to be stable after the face retreating to 120-150 m away from the cut. The peak value of front abutment pressure arises at 5-12 m before the operating face, and mass ratio is greater than the designed value of 1.15, which effectively ensures the control of strata movement. The research results are bases for intensively studying basic theories of solid backfill mining strata behaviors and its control, and provide theoretical guidance for engineering design in FMSBM.
基金support for this work was provided by the National Natural Science Foundation of China(No.51574123)the Scientific Research Project of Hunan Province Office of Education(No.18A185),which are gratefully acknowledged.
文摘Wall-mounted swirling ventilation is a new type of system in mechanized excavation faces with a dust sup-pression performance that is closely related to the blowing-to-suction flow ratio.Physical and simulation models were developed according to the No.C103 mechanized excavation face in the Nahe Coal Mine of the Baise Mining Bureau,Guangxi Province to optimize the blowing-to-suction flow ratio for wall-mounted swirling ventilation.Both the k-εturbulence model and the discrete phase model were utilized to simulate airflow field structures and dust concentration distribution patterns at various blowing-to-suction flow ratios.The results suggest that higher blowing-to-suction flow ratios increase the airflow field disturbance around the working face and weaken the intensity of the axial air curtain.On the other hand,both the intensity of the radial air curtain and the dust suppression effect are enhanced.At a blowing-to-suction flow ratio of 0.8,the wall-mounted swirling ventilation system achieved the most favorable dust suppression performance.Both the total dust and respirable dust had their lowest concentrations with maximum efficiencies of reducing both types at 90.33%and 87.16%,respectively.
基金Supported by Research and Development of the Third Batch of Application Technology in Chengdu in 2017"Development and Application of New Varieties of High Quality and Efficient Grain and Oil Crops"
文摘Taking Zhongyu 3 as the experimental variety,this paper analyzed the effects of different sowing depths(5 cm and 8 cm)and sowing equipment(ZHSB-10 medium-sized sowing machine and 2B-2 small sowing machine)on the growth,yield and components of yield of mechanized sowing maize,to provide references for mechanized maize production in southwest ecological zone.The results showed that the germination rate,plant height uniformity,and most agronomic traits of maize plant were higher at the sowing depth of 5 cm;with the growth of the maize,the effects of the sowing depth on agronomic traits of maize gradually declined;the effects of the sowing depth on the empty stalk rate,double ear rate,lodging rate,and lodging and stem broken rate were smaller;the sowing depth of 5 cm could increase the yield of mechanized sowing maize and most yield traits of maize.Different sowing machines had smaller effects on the germination rate,plant height uniformity,and agronomic traits of all growth stages,empty stalk rate,double ear rate,lodging rate,lodging and stem broken rate,yield,and components of yield of mechanized sowing maize.
基金funded by the National Natural Science Foundation of China (No. 51776217)the Fundamental Research Funds for the Central Universities of China (No. 2013XK08.2)
文摘Based on the fluid mechanics and mass transfer theory,a mathematical model of the spatial-temporal variation of gas was derived to avoid the gas accident caused by the main fan stopping ventilation under the condition of intermittent ventilation in the tunnel.According to the actual parameters of the tunnel,a numerical calculation model was established.The spatial-temporal variation of gas concentration in the fully mechanized working face under the condition of intermittent ventilation was calculated by using the commercial package Fluent,and the correctness of the calculated results was verified by the actual monitoring data of the mine.Firstly,the gas concentration was calculated under different wind velocities at driving face in coal tunnel,and the result showed that the gas can be carried effectively by the wind when the wind velocity is about 1.8 m/s.Secondly,the distributions of wind velocity and gas concentration at driving face were studied at 1.8 m/s,and the result showed the gas concentration increased gradually with the distance close to the outlet,but the gas concentration almost kept constant at the height of driving face.Thirdly,the distribution of gas concentration was investigated with time after the ventilation was stopped and restarted,respectively.The gas concentration of test point gradually increased with the increment of downtime,when the downtime was 40 min,the gas concentration of test point 3 reached the maximum value.The gas concentration increased gradually and reached the maximum after10 min of restart,then sharply decreased and kept constant.
基金supported by National Natural Science Foundation of China(Nos.51734009,51904290)the Natural Science Foundation of Jiangsu Province,China(BK20180663).
文摘The stability control of gob-side entry retaining in fully mechanized caving face is a typical challenge in many coal mines in China.The rotation and subsidence of the lateral cantilever play a critical role in a coal mine,possibly leading to instability in a coal seam wall or a gob-side wall due to its excessive rotation subsidence.Hence,the presplitting blasting measures in the roof was implemented to cut down the lower main roof and convert it to caved immediate roof strata,which can significantly reduce the rotation space for the lateral cantilever and effectively control its rotation.Firstly,the compatible deformation model was established to investigate the quantitative relationship between the deformation of the coal seam wall and the gob-side wall and the subsidence of the lateral cantilever.Then,the instability judgments for the coal seam wall and gob-side wall were revealed,and the determination method for the optimal roof cutting height were obtained.Furthermore,The Universal Distinct Element Code numerical simulation was adopted to investigate the effect of roof-cutting height on the stability of the retained entry.The numerical simulation results indicated that the deformation of the roadway could be effectively controlled when the roofcutting height reached to 18 m,which verified the theoretical deduction well.Finally,a field application was performed at the No.3307 haulage gateway in the Tangan coal mine,Ltd.,Shanxi Province,China.The field monitoring results showed that the blasting roof cutting method could effectively control the large deformation of surrounding rocks,which provided helpful references for coal mine safety production under similar conditions.
基金The funding was supported by National Natural Science Foundation of China(No.51974294).
文摘It is difficult to accurately calculate the lump coal rate in a fully mechanized mining face.Therefore,a numerical simulation of the coal wall cutting process,which revealed the crack expansion,development,evolution in the coal body and the corresponding lump coal formation mechanism,was performed in PFC2D.Moreover,a correlation was established between the cutting force and lump coal formation,and a statistical analysis method was proposed to determine the lump coal rate.The following conclusions are drawn from the results:(1)Based on a soft ball model,a coal wall cutting model is established.By setting the roller parameters based on linear bonding and simulating the roller cutting process of the coal body,the coal wall cutting process is effectively simulated,and accurate lump coal rate statistics are provided.(2)Under the cutting stress,the coal body in the working face underwent three stages—microfracture generation,fracture expansion,and fracture penetration—to form lump coal,in which the fracture direction is orthogonal to the cutting pressure chain.Within a certain range from the roller,as the cutting depth of the roller increased,the number of new fractures in the coal body first increases and then stabilizes.(3)Under the cutting stress,the fractured coal body is locally compressed,thereby forming a compact core.The formation and destruction of the compact core causes fluctuations in the cutting force.The fluctuation amplitude is positively related to the coal mass.(4)Because the simulation does not consider secondary damage in the coal,the simulated lump coal rate is larger than the actual lump coal rate in the working face;this deviation is mainly concentrated in large lump coal with a diameter greater than 300 mm.
基金National Key R&D Program of China(2020YFD1000600)Guangdong Provincial Team of Technical System Innovation for Sugarcane Sisal Hemp Industry(2019KJ104-15)Science and Technology Planning Project of Zhanjiang City(2019A01030).
文摘[Objectives]To study the breeding of a new sugarcane variety Yuetang 08776 suitable for mechanized production.[Methods]With Yuetang 96-86 as the female parent and Yuetang 99-66 as the male parent,Yuetang 08776 was bred by the Bioengineering Institute of Guangdong Academy of Sciences.It was approved as a non-major crop variety by the Ministry of Agriculture and Rural Affairs in December,2019.Through many years of multi-pilot trials,the characters,traits and disease resistance of Yuetang 08776 were investigated,and the key points of its cultivation technique were summarized.[Results]Yuetang 08776 is characterized by medium maturity,high sugar content,high and stable yield,strong cold and drought resistance,large number of effective stems,strong ratooning ability and lodging resistance.Yuetang 08776 has excellent agronomic traits,and has been identified as moderately resistant to smut and mosaic disease.The average cane yield of Yuetang 08776 was 119.89 t/ha,18.50 t/ha higher than that of CK,an increase of 18.25%.The average sugar yield was 17.15,2.11 t/ha higher than that of CK,an increase of 14.03%.The average sucrose content of Yuetang 08776 in the early period(November to December)was 13.20%,0.71 percentage points lower than that of CK;in the middle and late period(January to March of the following year),the average sucrose content was 15.23%,0.22 percentage points lower than that of CK;and the average sucrose content of the whole period was 14.21%,0.47 percentage points lower than that of CK.[Conclusions]Yuetang 08776 is a sugarcane variety with medium maturity,high sugar,high and stable yield,strong resistance and good ratooning.It is suitable for mechanized seeding,management and harvesting,and suitable for planting and popularizing in most sugarcane production areas of Guangdong,Guangxi and Yunnan.
文摘The number workable days (NWD) for agricultural field operations is of great importance for sizing agricultural machinery fleets. This is especially pivotal for sugarcane harvest, which extends from 8 to 10 months/year. In light of this, the current study aimed at defining criteria for obtaining the NWD for rational sugarcane harvest at different sites in the state of São Paulo, southern Brazil, taking into account both a general and a specific criteria. For this purpose, data from harvest interruption of 30 sugar mills in southern Brazil throughout periods ranging from two to five years were used. The following variables were tested as criteria for defining harvest interruption: minimum precipitation (PREC);soil water holding capacity (SWHC);and the limit of the ratio between actual soil moisture (SM) and SWHC. Based on such a specific criterion ascribed to each site along with a general criterion, NWD maps were prepared for the state of São Paulo, Brazil. The results showed that there were variations from the definition criteria of NWD at the different sites in the state. However, the use of a general criterion for harvest interruption, based on PREC ≥ 3 mm, SWHC = 40 mm and SM/SWHC ≥ 90%, provided accurate results. During the validation of these criteria, the NWD maps generated from the individual criterion proposed for each site resulted in an average error of 24.9 days/year, whereas the map generated from the general criterion culminated in an average error of 4.4 days/year.
基金Supported by Guangxi Scientific Research and Technology Development Program(GK AB 16380177)Project of Province and Ministry Co-sponsored Collaborative Innovation Center of Sugarcane IndustryGuangxi Special Finance Project
文摘[Objectives] This study was conducted to explore the effect of machine harvesting on ratooning ability of Guitang 47, and to provide basis for mechanized production of Guitang 47. [Methods] On the basis of mechanized planting and management of newly planted sugarcane Guitang 47, a comparative test of machine harvesting and manual harvesting was conducted, during which the plant generation rate, sugarcane yield, sucrose content and related agronomic traits of ratoon cane were continuously investigated in two years after machine harvesting of the newly planted sugarcane. [Results] There were no significant differences in the plant generation rate, plant height, stalk diameter, millable cane, sugarcane yield and sucrose content from manual harvesting of Guitang 47 in the first and second years after machine harvesting. In the second year after machine harvesting, the yields of ratoon cane and the sugar content reached 101.70 and 15.32 t/hm^2, respectively, which were equivalent to those of manual harvesting. [Conclusions] Guitang 47 has strong ratooning ability and lodging resistance and strong resistance to rolling and crushing, and is adaptive to full mechanized production. It should be promoted and accelerated in sugarcane areas lacking labor to reduce costs and increase benefits.
基金National Key Basic Research and Development Program Fund project(Grant No.2014CB046306)the Central University Funding Project for Basic Scientific Research Operations(Grant No.2009QJ16)
文摘To keep coal workers away from the hazardous area with frequent accidents such as the roof fall and rib spalling in an underground coalmine,we put forward the solution with robotized self-moving anchor-supporting unit.The existing research shows that the surrounding rock of the roadway has self-stability,and the early or late support is not conducive to the safe and reliable support of the roadway,so there is a problem of support opportunity.In order to study the supporting effect and the optimal supporting time of the above solution,we established the mechanical coupling model of surrounding rock and advance support,and investigated the surrounding rock deformation and advance support pressure distribution under different reserved roof subsidence by using the numerical simulation software FLAC3D.The results show that the deformation of surrounding rock increases and finally tends to a stable level with the increase of pre settlement of roadway roof,and when the pre settlement of roof is between 8-15 mm,the vertical pressure of the top beam of advance support reaches the minimum value,about 0.58 MPa.Based on the above research,we put forward the optimum supporting time in roadway excavation,and summarized the evaluation method based on the mechanical coupling model of surrounding rock-advance support.
基金FAPERJ,for the financial support and for the execution of the research study
文摘Sugarcane is a major Brazilian agricultural product. The area cultivated in the state of Rio de Janeiro for the 2011-12 crop was of 41.31 thousand hectares. The process of mechanized harvesting of the crop still has many visible losses of raw materials caused by several factors. This study aimed at evaluating the visible losses of sugarcane and ratoon damage using the Case A4000 harvester and was conducted in the municipality of Campos dos Goytacazes, in the state of Rio de Janeiro, Brazil. The materials left on the field by the harvester were collected in six ratoon cane rows, with a length of 350 m, setting the frame sampling to every 50 m. The sampling area consisted of 20 m2, with eight repetitions. The losses were calculated in t·ha-1 and in %. The comparison of averages was performed by using the confidence interval, constructed by statistical “t” at 5% probability to compare the types of losses. The estimated productivity of the area was of 54 t·ha-1. The differences between the types of losses were significant. The billets and splinters were found in greater quantity.
基金supported by the Major International (Regional)Joint Research Project of National Natural Science Foundation of China (32061143038)the China Agriculture Research System(CARS-01-20)the Fundamental Research Funds for the Central Universities (2662020ZKPY015)。
文摘Yield loss(Y_(Loss)) in the ratoon crop due to crushing damage to left stubble from mechanical harvesting of the main crop is a constraint for wide adoption of mechanized rice ratooning technology.Soil drying before the harvest of the main crop has been proposed to overcome this problem.The objective of this study was to determine the effect of soil drying during the mid-to-late grain filling stage of the main crop on grain yield of the ratoon crop in a mechanized rice ratooning system.Field experiments were conducted to compare Y_(Loss) between light(LD) and heavy(HD) soil drying treatments in Hubei province,central China in 2017 and 2018.Y_(Loss) was calculated as the percentage of yield reduction in the ratoon crop with the main crop harvested mechanically,relative to the grain yield of the ratoon crop with the main crop harvested manually.In comparison with LD,soil hardness was increased by 42.8%-84.7% in HD at the 5-20 cm soil depth at maturity of the main crop.Soil hardness at 5 and 10 cm depths reached respectively 4.05 and 7.07 kg cm^(-2) in HD.Soil drying treatment did not significantly affect the grain yield of the main crop.Under mechanical harvesting of the main crop,HD increased the grain yield of the ratoon crop by 9.4% relative to LD.Consequently,Y_(Loss) was only 3.4% in HD,in contrast to 16.3% in LD.The differences in grain yield and Y_(Loos) between the two soil drying treatments were explained mainly by panicles m^(-2),which was increased significantly by HD in the track zone of the ratoon crop compared with LD.These results suggest that heavy soil drying practice during the mid-to-late grain filling stage of the main crop is effective for reducing Y_(Loss) of the ratoon crop in a mechanized rice ratooning system.
基金the Guangdong Basic and Applied Basic Research Foundation(Grant No.2020B1515020034)the National Postdoctoral Program for Innovative Talents(Grant No.BX201700083)+3 种基金the Commonweal Project(Grant No.201203059)the Key Research and Development Program of Guangdong(Grant No.2019B020221003)the National Key Research and Development Program of China(Grant No.2018YFD0100800)as well as the China Agriculture Research System(Grant No.CARS-01-41).
文摘Mechanical hill wet-seeded rice machine is beneficial for establishing and growing uniform rows of seedlings.However,there is limited knowledge regarding the effects of the establishment of furrows on growth,lodging and yield,and their relationships with root traits.In this study,field experiments were conducted during 2012 and 2013 using two super rice varieties(hybrid rice Peizataifeng and inbred rice Yuxiangyouzhan)under three furrow establishment treatments(T1,both water and seed furrows were established by the machine;T2,only seed furrows were established by the machine;and T3,neither water nor seed furrows were established by the machine).Lodging index,lodging-related traits,grain yield,above-ground dry weight and root traits were measured.The results showed that the lodging index was significantly affected by the treatments with furrows(T1 and T2).The strongest lodging resistance was detected in the mechanical hill wet-seeded rice with furrow treatment(T1)in both 2012 and 2013.Lodging resistance was strongly related to the breaking resistance.No significant difference was found in grain yield or dry weight of the mechanical hill wet-seeded rice.Therefore,the mechanical hill wet-seeded rice with furrow treatment increased rice lodging resistance,which was related to root traits.
文摘This study aimed at quantitatively evaluating the sugarcane losses and the damage caused to the ratoon cane while using the Case IH A8800 harvester in different displacement speeds;it was conducted in the municipality of Campos dos Goytacazes, in Rio de Janeiro, Brazil. Three speeds were used as treatment (2 km·h-1, 3 km·h-1, and 4.5 km·h-1), and each treatment was composed of six rows of harvested ratoon, each with a length of 290 m. In order to evaluate the quantitative losses in t·ha-1 and the percentage of losses, the remaining sugarcane, left on the field after harvesting, was collected. The sampling frame was set to every 50 m, dividing the borders by 40 m;the measurement for each sampling area was of 20 m2, with five repetitions. In order to evaluate the damage caused to the ratoon canes, we chose a visual methodology to classify the damage degrees, ranging from one to four. There was no significant difference in losses when comparing different speeds. Therefore, it is more advantageous and economically viable to use the speed of 4.5 km·h-1, which collects more in less time.
基金Supported by Agricultural Machinery Promotion Station Project(HLBER2016002)
文摘The mechanized large-ridge production technology of potato was summarized,including preparation before sowing,deep tillage and land preparation,deep application of chemical fertilizer,sowing,intertillage,disease and pest control,harvesting and other related contents.The comparative experimental study of large ridge and small ridge modes focused on the effects of ridge spacing on soil bulk density,temperature,water retention,crop growth and yield.The technology has the advantages of time saving,labor saving,seed saving,and fertilizer saving.It can significantly improve production efficiency,and is a high-yield and high-efficiency planting mode that increases potato yield.This model can increase yield by 370 kg/hm 2 and improve income by 160 yuan/hm 2.The results of this study have greatly promoted the promotion and application of mechanized largo-ridge potato planting technology.
文摘This paper standardizes the operation of rapeseed production including variety choosing,field preparation,mechanical seeding,field management,mechanical harvesting etc.,to realize full mechanization of rapeseed production. The key technologies: the optimum sowing date was from mid-September to mid-October in rapeseed-rice（corn） double cropping system region,and from mid-October to late October in rapeseed-rice-rice triple-cropping region; seeding rate was 4. 5 kg/ha-6. 0 kg/ha; the optimum density was 450000-750000 plants per ha;150-240 kg N fertilizer,60-90 kg P2O5 fertilizer,90-135 kg K2O fertilizer and 7. 5-15 kg B fertilizer were used per ha,50% of N fertilizer and the rest of fertilizer were used as basal fertilizer; segmented harvesting was done when 70%-80% of siliques per plant was yellow and combined harvesting was done when more than 90% of siliques per plant was yellow or brown.
基金appreciate the funding from the National Key R&D Program of China“the 14th Five-Year Plan”(No.2020YFD1000100)the National Natural Science Foundation of China(No.52205284)This work was also supported by the Fundamental Research Funds for the Central Universities(No.SWU119015).
文摘Mechanized harvesting technologies with shaking systems for fruit industry have been widely investigated and significantly developed over the past several decades which were presented by a large amount of literature.This paper reviews the research and development progress of mechanized harvesting of fruits systematically with a focus on the theoretical study,fruit crop variety,shaking system categories,abscission chemical agents,and their actual applications.Based on the comprehensive review,mechanized harvesting systems for different fruit crops appear multifarious shaking modes with various vibratory mechanisms and structural dimensions.Major advantages in the development of fruit mechanical harvesting with effective vibratory patterns and catching frames provide a series of economic and agronomic benefits,such as reducing labor costs,promoting standardized planting,and increasing productivity.However,fruit injury and tree damage are the main reasons why mechanical shaking systems are rarely used for fresh fruit harvesting because of tenderness and frangibility of the fruit crops.Therefore,more efforts should be concentrated on the innovative shake-and-catch system with suitable frequency and amplitude to achieve low fruit damage or even nondestructive harvesting for fresh fruit market.This overview summarized the advantages and bottlenecks of these shaking systems for fruit harvesting and proposed the challenges and some constructive prospective viewpoints aimed at the major issues of mechanical harvesting techniques.In addition,employing sorting technologies to classify the postharvest fruits provide a new direction for the further development of mechanized harvesting in high-value fruit crops,as well as bring more benefits to growers and increase their interest in equipment investment on the mechanical shaking harvester for the fruit industry.
