To decrease the metal losses of RF spiral inductor,a novel layout structure with gradually reduced metal line width and space from outside to inside is presented. This gradual changed inductor has less eddy-current ef...To decrease the metal losses of RF spiral inductor,a novel layout structure with gradually reduced metal line width and space from outside to inside is presented. This gradual changed inductor has less eddy-current effect than the conventional inductor of fixed metal width and space. So the series resistance can be reduced and the quality （Q） factor of the inductor relating to metal losses is increased. The obtained experimental results corroborate the validity of the proposed method. For a 6nH inductor on high-resistivity silicon at 2.46GHz,Q factor of 14.25 is 11.3% higher than the conventional inductor with the same layout size. This inductor can be integrated with radio frequency integrated circuits to gain better performance in RF front end of a wireless communication system.展开更多
钢丝绳金属横截面积损失(Loss of Metallic area)直接影响钢丝绳承载强度等特性,因此其检测及定量分析对于设备安全可靠运行具有重要意义。针对目前主磁通检测中存在的线圈绕制困难、参数确定模糊等问题,基于仿真模型提出一种基于印制...钢丝绳金属横截面积损失(Loss of Metallic area)直接影响钢丝绳承载强度等特性,因此其检测及定量分析对于设备安全可靠运行具有重要意义。针对目前主磁通检测中存在的线圈绕制困难、参数确定模糊等问题,基于仿真模型提出一种基于印制电路板(Printed Circuit Board)的分体式线圈结构,分析了线圈匝数、线圈层数、线距等参数对检测信号的影响;建立主磁通检测模型,探究损伤宽度对主磁通检测信号的影响规律,并针对损伤宽度变化造成的信号损失设计补偿方法;最后通过钢丝实验验证金属横截面积定量检测效果,表明该方法定量误差在1%以内,能够有效检测钢丝绳的LMA。展开更多
金属化聚丙烯薄膜电容器(metallized polypropylene film capacitors, MPPFC)在充电条件下的自愈击穿可能造成电极和介质膜的永久性损伤,导致其电容减少和介电损耗增加。基于此,本文研究了MPPFC充电过程中的宏观特征量—自愈电压、自愈...金属化聚丙烯薄膜电容器(metallized polypropylene film capacitors, MPPFC)在充电条件下的自愈击穿可能造成电极和介质膜的永久性损伤,导致其电容减少和介电损耗增加。基于此,本文研究了MPPFC充电过程中的宏观特征量—自愈电压、自愈能量、电极损失面积等的演变规律并结合仿真分析了介质膜表面微观结构的变化特性。结果显示,自愈能量随自愈电压增加呈幂函数增长,与电极损失面积正相关,受电弧放电的影响,高压电极损失面积大于地电极且形状较地电极规则,其边界分形维数平均值(1.525)小于地电极(1.665)。此外,电极孔洞缺口轴向边缘的电流密度高于切向边缘,致使金属化聚丙烯薄膜自愈击穿过程中金属化电极轴向损伤高于切向。了解这些特性对全面揭示多场耦合复杂工况下MPPFC物性演化规律具有重要意义。展开更多
Losses of the alloying elements during vacuum induction melting of the binary NiTi alloys were evaluated by visual observation and chemical analysis of the NiTi melted specimens and the scalp formed on the internal su...Losses of the alloying elements during vacuum induction melting of the binary NiTi alloys were evaluated by visual observation and chemical analysis of the NiTi melted specimens and the scalp formed on the internal surface of the crucible. The results indicated that the major sources of the losses were （a） evaporation of the metals, （b） formation of the NiTi scalp and （c） the sprinkling drops splashed out of the melt due to the exothermic reactions occurring between Ni and Ti to form the NiTi parent phase. Quantitative evaluations were made for the metallic losses by holding the molten alloy for 0.5, 3, 5, 10 and 15 min at around 100℃ above the melting point inside the crucible.Chemical analysis showed that there existed an optimum holding time of 3 min during which the alloying elements were only dropped to a predictable limit. Microstructure, chemical composition, shape memory and mechanical properties of the cast metal ingots were determined to indicate the appropriate achievements with the specified 3 min optimum holding time.展开更多
文摘To decrease the metal losses of RF spiral inductor,a novel layout structure with gradually reduced metal line width and space from outside to inside is presented. This gradual changed inductor has less eddy-current effect than the conventional inductor of fixed metal width and space. So the series resistance can be reduced and the quality （Q） factor of the inductor relating to metal losses is increased. The obtained experimental results corroborate the validity of the proposed method. For a 6nH inductor on high-resistivity silicon at 2.46GHz,Q factor of 14.25 is 11.3% higher than the conventional inductor with the same layout size. This inductor can be integrated with radio frequency integrated circuits to gain better performance in RF front end of a wireless communication system.
文摘金属化聚丙烯薄膜电容器(metallized polypropylene film capacitors, MPPFC)在充电条件下的自愈击穿可能造成电极和介质膜的永久性损伤,导致其电容减少和介电损耗增加。基于此,本文研究了MPPFC充电过程中的宏观特征量—自愈电压、自愈能量、电极损失面积等的演变规律并结合仿真分析了介质膜表面微观结构的变化特性。结果显示,自愈能量随自愈电压增加呈幂函数增长,与电极损失面积正相关,受电弧放电的影响,高压电极损失面积大于地电极且形状较地电极规则,其边界分形维数平均值(1.525)小于地电极(1.665)。此外,电极孔洞缺口轴向边缘的电流密度高于切向边缘,致使金属化聚丙烯薄膜自愈击穿过程中金属化电极轴向损伤高于切向。了解这些特性对全面揭示多场耦合复杂工况下MPPFC物性演化规律具有重要意义。
文摘Losses of the alloying elements during vacuum induction melting of the binary NiTi alloys were evaluated by visual observation and chemical analysis of the NiTi melted specimens and the scalp formed on the internal surface of the crucible. The results indicated that the major sources of the losses were （a） evaporation of the metals, （b） formation of the NiTi scalp and （c） the sprinkling drops splashed out of the melt due to the exothermic reactions occurring between Ni and Ti to form the NiTi parent phase. Quantitative evaluations were made for the metallic losses by holding the molten alloy for 0.5, 3, 5, 10 and 15 min at around 100℃ above the melting point inside the crucible.Chemical analysis showed that there existed an optimum holding time of 3 min during which the alloying elements were only dropped to a predictable limit. Microstructure, chemical composition, shape memory and mechanical properties of the cast metal ingots were determined to indicate the appropriate achievements with the specified 3 min optimum holding time.
