Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-te...Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-term effects on economy,environment,and society.This study collected soil samples from 16 sample points including a control point to examine the pollution degrees and spatial distribution of heavy metals,as well as ecological and health risks associated with heavy metal pollution in the Ijero-Ekiti mining site,Nigeria.Geographical Information System(GIS)and remote sensing technologies were used to identify regions with high concentrations of heavy metals and assess the environmental impact of gold mining activities.The results show that the mean heavy metal concentrations of 16 soil pointa are 8.94(±5.97)mg/kg for As,0.18(±0.54)mg/kg for Cd,0.11(±1.06)mg/kg for Co,14.32(±3.43)mg/kg for Cr,6.89(±0.64)mg/kg for Cu,48.92(±11.77)mg/kg for Fe,135.81(±30.75)mg/kg for Mn,5.92(±0.96)mg/kg for Ni,5.72(±1.66)mg/kg for Pb,and 13.94(±1.38)mg/kg for Zn.The study reveals that heavy metal concentration in soils follows the order of Mn>Fe>Cr>Zn>As>Cu>Ni>Pb>Co>Cd.An analysis of soil samples indicates that 3 principal components(PCs)account for 70.008%of the total variance and there are strong positive correlations between various pairs of heavy metals.The total potential ecological risk index(309.599)in the study area is high.Non-carcinogenic risk suggests that there may be long-term health impacts on people who work in the mining areas due to chronic exposure to the environment.Based on the study,the hazard index of carcinogenic health risks associated with heavy metals through ingestion is 520.00×10^(–4).Dermal contact from As and Cr also increases the risk of cancer,with the highest hazard index value of 18.40×10^(–4).The lowest exposure pathway,with the hazard index value of 0.68×10^(–4),indicates that the inhalation of heavy metals has a comparatively low risk of cancer.This study recommends the formulation of policies to monitor the Ijero-Ekiti mining site and other regions in Nigeria where indiscriminate artisanal gold mining activities exist.展开更多
Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the s...Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.展开更多
Greenhouse gas(GHG)emissions related to human activities have significantly caused climate change since the Industrial Revolution.China aims to achieve its carbon emission peak before 2030 and carbon neutrality before...Greenhouse gas(GHG)emissions related to human activities have significantly caused climate change since the Industrial Revolution.China aims to achieve its carbon emission peak before 2030 and carbon neutrality before 2060.Accordingly,this paper reviews and discusses technical strategies to achieve the“dual carbon”targets in China’s metal mines.First,global carbon emissions and emission intensities from metal mining industries are analyzed.The metal mining status and carbon emissions in China are then examined.Furthermore,advanced technologies for carbon mitigation and carbon sequestration in metal mines are reviewed.Finally,a technical roadmap for achieving carbon neutrality in China’s metal mines is proposed.Findings show that some international mining giants have already achieved their carbon reduction targets and planned to achieve carbon neutrality by 2050.Moreover,improving mining efficiency by developing advanced technologies and replacing fossil fuel with renewable energy are two key approaches in reducing GHG emissions.Green mines can significantly benefit from the carbon neutrality process for metal mines through the carbon absorption of reclamation vegetations.Geothermal energy extraction from operating and abandoned metal mines is a promising technology for providing clean energy and contributing to the carbon neutrality target of China’s metal mines.Carbon sequestration in mine backfills and tailings through mineral carbonation has the potential to permanently and safely store carbon dioxide,which can eventually make the metal mining industry carbon neutral or even carbon negative.展开更多
Firstly,the causes and existence state of soil pollution in metal mines were discussed.Secondly,the remediation technology of heavy metal contaminated soil was introduced.Thirdly,the remediation strategies for soil po...Firstly,the causes and existence state of soil pollution in metal mines were discussed.Secondly,the remediation technology of heavy metal contaminated soil was introduced.Thirdly,the remediation strategies for soil pollution in metal mines were analyzed.Finally,the problems and development direction of soil pollution remediation and control in metal mines were discussed.展开更多
Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using m...Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using mill tailings especially in metal mining is one of the best techniques.The tailings produced in milling process have traditionally been disposed in tailing ponds creating a waste disposal and environmental problems in terms of land degradation,air and water pollution,etc.This disposal practice is more acute in the metal milling industry where the fine grinding,required for value liberation,results in the production of very fine tailings in large percentage.This paper includes discussions on the effectiveness of different paste mixes with varying cement contents in paste backfilling operations.The results revealed that material composition and use of super plasticizer strongly influenced the strength of cemented backfill.展开更多
The Land and Resources Department of Hainan Province said on November 10 that the Overall Mineral Resources Plan of Hainan Province(2016-2020)(hereinafter referred to as the'Plan')has gone into effect with the...The Land and Resources Department of Hainan Province said on November 10 that the Overall Mineral Resources Plan of Hainan Province(2016-2020)(hereinafter referred to as the'Plan')has gone into effect with the approval of the Ministry of Land and Resources,and that the province will strongly promote the exploration and development of展开更多
文摘Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-term effects on economy,environment,and society.This study collected soil samples from 16 sample points including a control point to examine the pollution degrees and spatial distribution of heavy metals,as well as ecological and health risks associated with heavy metal pollution in the Ijero-Ekiti mining site,Nigeria.Geographical Information System(GIS)and remote sensing technologies were used to identify regions with high concentrations of heavy metals and assess the environmental impact of gold mining activities.The results show that the mean heavy metal concentrations of 16 soil pointa are 8.94(±5.97)mg/kg for As,0.18(±0.54)mg/kg for Cd,0.11(±1.06)mg/kg for Co,14.32(±3.43)mg/kg for Cr,6.89(±0.64)mg/kg for Cu,48.92(±11.77)mg/kg for Fe,135.81(±30.75)mg/kg for Mn,5.92(±0.96)mg/kg for Ni,5.72(±1.66)mg/kg for Pb,and 13.94(±1.38)mg/kg for Zn.The study reveals that heavy metal concentration in soils follows the order of Mn>Fe>Cr>Zn>As>Cu>Ni>Pb>Co>Cd.An analysis of soil samples indicates that 3 principal components(PCs)account for 70.008%of the total variance and there are strong positive correlations between various pairs of heavy metals.The total potential ecological risk index(309.599)in the study area is high.Non-carcinogenic risk suggests that there may be long-term health impacts on people who work in the mining areas due to chronic exposure to the environment.Based on the study,the hazard index of carcinogenic health risks associated with heavy metals through ingestion is 520.00×10^(–4).Dermal contact from As and Cr also increases the risk of cancer,with the highest hazard index value of 18.40×10^(–4).The lowest exposure pathway,with the hazard index value of 0.68×10^(–4),indicates that the inhalation of heavy metals has a comparatively low risk of cancer.This study recommends the formulation of policies to monitor the Ijero-Ekiti mining site and other regions in Nigeria where indiscriminate artisanal gold mining activities exist.
基金Financial support for this work was provided by the General Program and Youth Fund Program of the National Natural Science Foundation of China(Grant Nos.42377175 and 42002292).
文摘Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.
基金supported by the Chinese Academy of Engineering(No.2019-XZ-16)National Natural Science Foundation of China(No.L1824042)Fundamental Research Funds for the Central Universities,USTB(No.FRFIDRY-20-032)。
文摘Greenhouse gas(GHG)emissions related to human activities have significantly caused climate change since the Industrial Revolution.China aims to achieve its carbon emission peak before 2030 and carbon neutrality before 2060.Accordingly,this paper reviews and discusses technical strategies to achieve the“dual carbon”targets in China’s metal mines.First,global carbon emissions and emission intensities from metal mining industries are analyzed.The metal mining status and carbon emissions in China are then examined.Furthermore,advanced technologies for carbon mitigation and carbon sequestration in metal mines are reviewed.Finally,a technical roadmap for achieving carbon neutrality in China’s metal mines is proposed.Findings show that some international mining giants have already achieved their carbon reduction targets and planned to achieve carbon neutrality by 2050.Moreover,improving mining efficiency by developing advanced technologies and replacing fossil fuel with renewable energy are two key approaches in reducing GHG emissions.Green mines can significantly benefit from the carbon neutrality process for metal mines through the carbon absorption of reclamation vegetations.Geothermal energy extraction from operating and abandoned metal mines is a promising technology for providing clean energy and contributing to the carbon neutrality target of China’s metal mines.Carbon sequestration in mine backfills and tailings through mineral carbonation has the potential to permanently and safely store carbon dioxide,which can eventually make the metal mining industry carbon neutral or even carbon negative.
文摘Firstly,the causes and existence state of soil pollution in metal mines were discussed.Secondly,the remediation technology of heavy metal contaminated soil was introduced.Thirdly,the remediation strategies for soil pollution in metal mines were analyzed.Finally,the problems and development direction of soil pollution remediation and control in metal mines were discussed.
文摘Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using mill tailings especially in metal mining is one of the best techniques.The tailings produced in milling process have traditionally been disposed in tailing ponds creating a waste disposal and environmental problems in terms of land degradation,air and water pollution,etc.This disposal practice is more acute in the metal milling industry where the fine grinding,required for value liberation,results in the production of very fine tailings in large percentage.This paper includes discussions on the effectiveness of different paste mixes with varying cement contents in paste backfilling operations.The results revealed that material composition and use of super plasticizer strongly influenced the strength of cemented backfill.
文摘The Land and Resources Department of Hainan Province said on November 10 that the Overall Mineral Resources Plan of Hainan Province(2016-2020)(hereinafter referred to as the'Plan')has gone into effect with the approval of the Ministry of Land and Resources,and that the province will strongly promote the exploration and development of
