A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the ...A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the two PIN diodes between ON and OFF states, the isotropic and anisotropic reflections can be flexibly achieved. For either the isotropic reflection or the anisotropic reflection, the two operation states achieve the reflection coefficients with approximately equal magnitude and 180°out of phase, thus giving rise to the isotropic/anisotropic 1-bit metasurface unit cells. With the 1-bit unit cells, a 12-by-12 metasurface reflectarray is optimally designed and fabricated. Under either y-or x-polarized incident wave illumination, the reflectarray can achieve the co-polarized and cross-polarized beam scanning, respectively, with the peak gains of 20.08 d Bi and 17.26 d Bi within the scan range of about ±50°. With the right-handed circular polarization(RHCP) excitation, the left-handed circular polarization(LHCP) radiation with the peak gain of 16.98 d Bic can be achieved within the scan range of ±50°. Good agreement between the experimental results and the simulation results are observed for 2D beam steering and polarization manipulation capabilities.展开更多
Active metasurfaces with dynamically reconfigurable functionalities are highly demanded in various practical applications.Here,we propose a wideband low-scattering metasurface that can realize an in-band reconfigurabl...Active metasurfaces with dynamically reconfigurable functionalities are highly demanded in various practical applications.Here,we propose a wideband low-scattering metasurface that can realize an in-band reconfigurable transparent window by altering the operation states of the PIN diodes loaded on the structures.The metasurface is composed of a band-pass frequency selective surface(FSS)sandwiched between two polarization conversion metasurfaces(PCMs).PIN diodes are integrated into the FSS to switch the transparent window,while a checkerboard configuration is applied in PCMs for the diffusive-reflective function.A sample with 20×20 elements is designed,fabricated,and experimentally verified.Both simulated and measured results show that the in-band functions can be dynamically switched between beam-splitting scattering and high transmission by controlling the biasing states of the diodes,while low backscattering can be attained outside the passband.Furthermore,the resonant structures of FSS also play the role of feeding lines,thus significantly eliminating extra interference compared with conventional feeding networks.We envision that the proposed metasurface may provide new possibilities for the development of an intelligent stealth platform and its antenna applications.展开更多
We conduct a theoretical analysis of the massive and tunable Goos–Hänchen(GH) shift on a polar crystal covered with periodical black phosphorus(BP)-patches in the THz range. The surface plasmon phonon polaritons...We conduct a theoretical analysis of the massive and tunable Goos–Hänchen(GH) shift on a polar crystal covered with periodical black phosphorus(BP)-patches in the THz range. The surface plasmon phonon polaritons(SPPPs), which are coupled by the surface phonon polaritons(SPh Ps) and surface plasmon polaritons(SPPs), can greatly increase GH shifts.Based on the in-plane anisotropy of BP, two typical metasurface models are designed and investigated. An enormous GH shift of about-7565.58 λ_(0) is achieved by adjusting the physical parameters of the BP-patches. In the designed metasurface structure, the maximum sensitivity accompanying large GH shifts can reach about 6.43 × 10^(8) λ_(0)/RIU, which is extremely sensitive to the size, carrier density, and layer number of BP. Compared with a traditional surface plasmon resonance sensor, the sensitivity is increased by at least two orders of magnitude. We believe that investigating metasurface-based SPPPs sensors could lead to high-sensitivity biochemical detection applications.展开更多
Optical neural networks have significant advantages in terms of power consumption,parallelism,and high computing speed,which has intrigued extensive attention in both academic and engineering communities.It has been c...Optical neural networks have significant advantages in terms of power consumption,parallelism,and high computing speed,which has intrigued extensive attention in both academic and engineering communities.It has been considered as one of the powerful tools in promoting the fields of imaging processing and object recognition.However,the existing optical system architecture cannot be reconstructed to the realization of multi-functional artificial intelligence systems simultaneously.To push the development of this issue,we propose the pluggable diffractive neural networks(P-DNN),a general paradigm resorting to the cascaded metasurfaces,which can be applied to recognize various tasks by switching internal plug-ins.As the proof-of-principle,the recognition functions of six types of handwritten digits and six types of fashions are numerical simulated and experimental demonstrated at near-infrared regimes.Encouragingly,the proposed paradigm not only improves the flexibility of the optical neural networks but paves the new route for achieving high-speed,low-power and versatile artificial intelligence systems.展开更多
In the modern wireless communication system,the manipulation for polarization of electromagnetic wave plays a important role in improving the capacity and reliability of communication.In this paper,a multifunctional p...In the modern wireless communication system,the manipulation for polarization of electromagnetic wave plays a important role in improving the capacity and reliability of communication.In this paper,a multifunctional polarization converter(MFPC)based on the multilayer reconfigurable metasurface is proposed,which can assist the source antenna to transmit and receive multiple polarization signals.The MFPC consists of a grating which can filter out the undesired polarization and four layers of metasurfaces incorporated with PIN diodes.The functions of the MFPC include LTC and LTL polarization conversions,co-polarization transmission and reflection for arbitrary polarization.By changing the states of PIN diodes,the functions of MFPC can be dynamically switched.Loaded on the aperture of source antenna,the proposed MFPC can serve as a transmissive array with multiple polarization channels,and can also provide EM protection for source antenna by reflecting the incoming interference waves.Cascading of the metasurfaces produces Fabry-Perot resonance in the MFPC,and it contributes to the realization of LTC and LTL polarization conversions.To verify the performance of the proposed MFPC,the prototype is fabricated and tested.The measured results show that the fractional bandwidths of four functions are all higher than 31.9% with transmission or reflection coefficients higher than-2 d B.The frequency band of each function is mainly concentrated in S-band.The measured data are in agreement with the simulated results.展开更多
Color metasurface holograms are powerful and versatile platforms for modulating the amplitude,phase,polarization,and other properties of light at multiple operating wavelengths.However,the current color metasurface ho...Color metasurface holograms are powerful and versatile platforms for modulating the amplitude,phase,polarization,and other properties of light at multiple operating wavelengths.However,the current color metasurface holography can only realize static manipulation.In this study,we propose and demonstrate a multiplexing metasurface technique combined with multiwavelength code-division multiplexing(CDM)to realize dynamic manipulation.Multicolor code references are utilized to record information within a single metasurface and increase the information capacity and security for anticracks.A total of 48 monochrome images consisting of pure color characters and multilevel color video frames were reconstructed in dual polarization channels of the birefringent metasurface to exhibit high information density,and a video was displayed via sequential illumination of the corresponding code patterns to verify the ability of dynamic manipulation.Our approach demonstrates significant application potential in optical data storage,optical encryption,multiwavelengthversatile diffractive optical elements,and stimulated emission depletion microscopy.展开更多
Optical logic gates play important roles in all-optical logic circuits,which lie at the heart of the next-generation optical computing technology.However,the intrinsic contradiction between compactness and robustness ...Optical logic gates play important roles in all-optical logic circuits,which lie at the heart of the next-generation optical computing technology.However,the intrinsic contradiction between compactness and robustness hinders the development in this field.Here,we propose a simple design principle that can possess multiple-input-output states according to the incident circular polarization and direction based on the metasurface doublet,which enables controlled-NOT logic gates in infrared region.Therefore,the directional asymmetric electromagnetic transmission can be achieved.As a proof of concept,a spin-dependent Janus metasurface is designed and experimentally verified that four distinct images corresponding to four input states can be captured in the far-field.In addition,since the design method is derived from geometric optics,it can be easily applied to other spectra.We believe that the proposed metasurface doublet may empower many potential applications in chiral imaging,chiroptical spectroscopy and optical computing.展开更多
As a promising counterpart of two-dimensional metamaterials,metasurfaces enable to arbitrarily control the wavefront of light at subwavelength scale and hold promise for planar holography and applicable multiplexing d...As a promising counterpart of two-dimensional metamaterials,metasurfaces enable to arbitrarily control the wavefront of light at subwavelength scale and hold promise for planar holography and applicable multiplexing devices.Nevertheless,the degrees of freedom(DoF)to orthogonally multiplex data have been almost exhausted.Compared with state-of-theart methods that extensively employ the orthogonal basis such as wavelength,polarization or orbital angular momentum,we propose an unprecedented method of peristrophic multiplexing by combining the spatial frequency orthogonality with the subwavelength detour phase principle.The orthogonal relationship between the spatial frequency of incident light and the locally shifted building blocks of metasurfaces can be regarded as an additional DoF.We experimentally demonstrate the viability of the multiplexed holograms.Moreover,this newly-explored orthogonality is compatible with conventional DoFs.Our findings will contribute to the development of multiplexing metasurfaces and provide a novel solution to nanophotonics,such as large-capacity chip-scale devices and highly integrated communication.展开更多
Bound states in the continuum(BICs)have exhibited extraordinary properties in photonics for enhanced light-matter interactions that enable appealing applications in nonlinear optics,biosensors,and ultrafast optical sw...Bound states in the continuum(BICs)have exhibited extraordinary properties in photonics for enhanced light-matter interactions that enable appealing applications in nonlinear optics,biosensors,and ultrafast optical switches.The most common strategy to apply BICs in a metasurface is by breaking symmetry of resonators in the uniform array that leaks the otherwise uncoupled mode to free space and exhibits an inverse quadratic relationship between quality factor(Q)and asymmetry.Here,we propose a scheme to further reduce scattering losses and improve the robustness of symmetry-protected BICs by decreasing the radiation density with a hybrid BIC lattice.We observe a significant increase of radiative Q in the hybrid lattice compared to the uniform lattice with a factor larger than 14.6.In the hybrid BIC lattice,modes are transferred toГpoint inherited from high symmetric X,Y,and M points in the Brillouin zone that reveal as multiple Fano resonances in the far field and would find applications in hyperspectral sensing.This work initiates a novel and generalized path toward reducing scattering losses and improving the robustness of BICs in terms of lattice engineering that would release the rigid requirements of fabrication accuracy and benefit applications of photonics and optoelectronic devices.展开更多
Metasurfaces incorporating graphene hold great promise for the active manipulation of terahertz waves. However,it remains challenging to design a broadband graphene-based terahertz metasurface with switchable function...Metasurfaces incorporating graphene hold great promise for the active manipulation of terahertz waves. However,it remains challenging to design a broadband graphene-based terahertz metasurface with switchable functionality of half-wave plate(HWP) and quarter-wave plate(QWP). Here, we propose a graphene–metal hybrid metasurface for achieving broadband switchable HWP/QWP in the terahertz regime. Simulation results show that, by varying the Fermi energy of graphene from 0 eV to 1 eV, the function of the reflective metasurface can be switched from an HWP with polarization conversion ratio exceeding 97% over a wide band ranging from 0.7 THz to 1.3 THz, to a QWP with ellipticity above 0.92over 0.78 THz–1.33 THz. The sharing bandwidth reaches up to 0.52 THz and the relative bandwidth is as high as 50%.We expect this broadband and dynamically switchable terahertz HWP/QWP will find applications in terahertz sensing,imaging, and telecommunications.展开更多
Complex-amplitude holographic metasurfaces(CAHMs)with the flexibility in modulating phase and amplitude profiles have been used to manipulate the propagation of wavefront with an unprecedented level,leading to higher ...Complex-amplitude holographic metasurfaces(CAHMs)with the flexibility in modulating phase and amplitude profiles have been used to manipulate the propagation of wavefront with an unprecedented level,leading to higher image-reconstruction quality compared with their natural counterparts.However,prevailing design methods of CAHMs are based on Huygens-Fresnel theory,meta-atom optimization,numerical simulation and experimental verification,which results in a consumption of computing resources.Here,we applied residual encoder-decoder convolutional neural network to directly map the electric field distributions and input images for monolithic metasurface design.A pretrained network is firstly trained by the electric field distributions calculated by diffraction theory,which is subsequently migrated as transfer learning framework to map the simulated electric field distributions and input images.The training results show that the normalized mean pixel error is about 3%on dataset.As verification,the metasurface prototypes are fabricated,simulated and measured.The reconstructed electric field of reverse-engineered metasurface exhibits high similarity to the target electric field,which demonstrates the effectiveness of our design.Encouragingly,this work provides a monolithic field-to-pattern design method for CAHMs,which paves a new route for the direct reconstruction of metasurfaces.展开更多
Terahertz wave is between microwave and infrared bands in the electromagnetic spectrum with the frequency range from 0.1 THz to 10 THz. Controlling and processing of the polarization state in terahertz wave are the fo...Terahertz wave is between microwave and infrared bands in the electromagnetic spectrum with the frequency range from 0.1 THz to 10 THz. Controlling and processing of the polarization state in terahertz wave are the focus due to its great influence on the characteristics. In this paper, a transmissive metasurface terahertz polarization converter is designed in 3D structure with an upper surface of ruler-like rectangular, an intermediate dielectric layer and a lower surface of metal grid wires. Numerical simulations of the converter show that the polarization conversion ratio(PCR) is above 99.9% at 0.288 THz–1.6 THz, the polarization rotation angle(PRA) is close to 90° at 0.06 THz–1.4 THz, and the ellipticity angle(EA) is close to 0° at 0.531 THz–1.49 THz. The origin of the efficient polarization conversion is explained by analyzing the electric field intensity, magnetic field intensity, surface current, electric field energy density, and magnetic field energy density distributions of the converter at 1.19 THz and 0.87 THz, which are consistent with the energy transmittance and transmittance coefficient. In addition, the effects of different thickness and material of intermediate layer, thickness of upper surface material, polarized wave incidence angle, and metasurface materials on the performance of the polarization converter are discussed, and how they affect the conversion performance of the polarization converter are also explained.Our results provide a strong theoretical basis and technical support to develop high performance transmission-type terahertz polarization converters, and play an important role to promote the development of terahertz science and technology.展开更多
Real-time polarization medium-wave infrared(MIR)optical imaging systems enable the acquisition of infrared and polarization information for a target.At present,real-time polarization MIR devices face the following pro...Real-time polarization medium-wave infrared(MIR)optical imaging systems enable the acquisition of infrared and polarization information for a target.At present,real-time polarization MIR devices face the following problems:poor real-time performance,low transmission and high requirements for fabrication and integration.Herein,we aim to improve the performance of real-time polarization imaging systems in the MIR waveband and solve the above-mentioned defects.Therefore,we propose a MIR polarization imaging system to achieve real-time polarization-modulated imaging with high transmission as well as improved performance based on a pixel-wise metasurface micro-polarization array(PMMPA).The PMMPA element comprises several linear polarization(LP)filters with different polarization angles.The optimization results demonstrate that the transmittance of the center field of view for the LP filters is up to 77%at a wavelength of4.0μm and an extinction ratio of 88 d B.In addition,a near-diffraction-limited real-time MIR imaging optical system is designed with a field of view of 5°and an F-number of 2.The simulation results show that an MIR polarization imaging system with excellent real-time performance and high transmission is achieved by using the optimized PMMPA element.Therefore,the method is compatible with the available optical system design technologies and provides a way to realize real-time polarization imaging in MIR wavebands.展开更多
Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively...Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.展开更多
Simultaneous broadband absorption and polarization conversion are crucial in many practical applications,especially in terahertz communications.Thus,actively tunable metamaterial systems can exploit the graphene-based...Simultaneous broadband absorption and polarization conversion are crucial in many practical applications,especially in terahertz communications.Thus,actively tunable metamaterial systems can exploit the graphene-based nanomaterials derived from renewable resources because of the flexible surface conductivity and selective permeability of the nanomaterials at terahertz frequencies.In this paper,we propose a graphene-based active tunable bifunctional metasurface for dynamic terahertz absorption and polarization conversion.The graphene ring presents a certain opening angle(A)along the diagonal of the xoy plane.When A=0°,the proposed metasurface behaves as a broadband absorber.Numerical results show the feasibility of achieving this polarization-insensitive absorber with nearly 100%absorptance,and the bandwidth of its 90%absorptance is 1.22 THz under normal incidence.Alternatively,when A=40°after optimization,the proposed metasurface serves as a broadband polarization convertor,resulting in robust broadband polarization conversion ratio(PCR)curves with a bandwidth surpassing 0.5 THz in the reflection spectrum.To tune the PCR response or the broad absorption spectrum of graphene,we change the Fermi energy of graphene dynamically from 0 to 0.9 eV.Furthermore,both the broadband absorption and the linear polarization conversion spectra of the proposed metasurface exhibit insensitivity to the incident angle,allowing large incident angles within 40°under high-performance operating conditions.To demonstrate the physical process,we present the impedance matching theory and measure electric field distributions.This architecture in the THz frequency range has several applications,such as in modulators,sensors,stealth,and optoelectronic switches.THz wave polarization and beam steering also have broad application prospects in the field of intelligent systems.展开更多
Source illusion is an important issue in acoustic fields that has significant applications in various practical scenarios.Recent progress in acoustic metasurfaces has broken the limitation of manipulating large-scale ...Source illusion is an important issue in acoustic fields that has significant applications in various practical scenarios.Recent progress in acoustic metasurfaces has broken the limitation of manipulating large-scale waves at subwavelength scales and enables a better illusion capability,while there is still a problem that most previous studies are hampered by a lack of tuning capability.Here we propose a reconfigurable source illusion device capable of providing azimuthallydependent phase delay in real-time via changing the static voltage distribution.The resulting device is implemented by employing an adjustable piezoelectric metasurface with a subwavelength thickness that can achieve a full 2π-phase shift while maintaining efficient transmittance.The effectiveness of our mechanism is demonstrated via two distinctive source illusion phenomena of shifting and transforming a simple point source without changing the device geometry.We anticipate that our methodology,which does not require a large device size or a complicated phased array,will open up new avenues for the miniaturization and integration of source illusion devices and may promote their on-chip applications in a variety of fields,such as acoustic camouflage and manipulation precision.展开更多
Polarization manipulation of light is of great importance because it could promote development of wireless communications,biosensing,and polarization imaging.In order to use natural light more efficiently,it is highly...Polarization manipulation of light is of great importance because it could promote development of wireless communications,biosensing,and polarization imaging.In order to use natural light more efficiently,it is highly demanded to design and fabricate high performance asymmetric polarization converters which could covert the natural light to one particular linearly polarized light with high efficiency.Traditionally,polarizers could be achieved by controllers with crystals and polymers exhibiting birefringence.However,the polarizers are bulky in size and the theoretical conversion efficiency of the polarizers is limited to 0.5 with unpolarized light incidence.In this paper,we propose a polarization converter which could preserve high transmission for one linearly polarized light and convert the orthogonal linearly polarized light to its cross-polarized with high transmittance based on a multi-layer chiral metasurface.Theoretical results show that normally incident y-polarized light preserves high transmittance for the wavelength range from 685 nm to 800 nm while the orthogonal normally incident x-polarized light is efficiently converted to the y-polarized light with high transmittance from 725 nm to 748 nm.Accordingly,for unpolarized light incidence,transmittance larger than 0.5 has been successfully achieved in a broadband wavelength range from 712 nm to 773 nm with a maximum transmittance of 0.58 at 732 nm.展开更多
In order to solve the thickness dependence of plasma absorption of electromagnetic waves and further reduce the backward radar scattering cross section(RCS)of the target,we designed a novel composite structure of a me...In order to solve the thickness dependence of plasma absorption of electromagnetic waves and further reduce the backward radar scattering cross section(RCS)of the target,we designed a novel composite structure of a metasurface and plasma.A metasurface with three absorption peaks is designed by means of an equivalent circuit based on an electromagnetic resonance type metamaterial absorber.The reflection and absorption of the composite structure are numerically and experimentally verified.The finite integration method was used to simulate a composite structure of finite size to obtain the RCS.The experimental measurements of electromagnetic wave reflection were conducted by a vector network analyzer(Keysight N5234A)and horn antennas,etc.The research showed that the absorption capacity of this composite structure was substantially improved compared to either the plasma or the metasurface,and it is more convenient for application due to its low plasma thickness requirement and easy fabrication.展开更多
The electric-controlled metasurface antenna array(ECMSAA)with ultra-wideband frequency reconfigurable reflection suppression is proposed and realized.Firstly,an electriccontrolled metasurface with ultra-wideband frequ...The electric-controlled metasurface antenna array(ECMSAA)with ultra-wideband frequency reconfigurable reflection suppression is proposed and realized.Firstly,an electriccontrolled metasurface with ultra-wideband frequency reconfigurable in-phase reflection characteristics is designed.The element of the ECMSAA is constructed by loading the single electric-controlled metasurface unit on the conventional patch antenna element.The radiation properties of the conventional patch antenna and the reflection performance of electric-controlled metasurface are maintained when the antenna and the metasurface are integrated.Thus,the ECMSAA elements have excellent radiation properties and ultra-wideband frequency reconfigurable in-phase reflection characteristics simultaneously.To take a further step,a 6×10 ECMSAA is realized based on the designed metasurface antenna element.Simulated and measured results prove that the reflection of the ECMSAA is dynamically suppressed in the P and L bands.Meanwhile,high-gain and multi-polarization radiation properties of the ECMSAA are achieved.This design method not only realizes the frequency reconfigurable reflection suppression of the antenna array in the ultra-wide frequency band but also provides a way to develop an intelligent low-scattering antenna.展开更多
With the advancement of technology,shielding for terahertz(THz)electronic and communication equipment is increasingly important.The metamaterial absorption technique is mostly used to shield electromagnetic interferen...With the advancement of technology,shielding for terahertz(THz)electronic and communication equipment is increasingly important.The metamaterial absorption technique is mostly used to shield electromagnetic interference(EMI)in THz sensing technologies.The most widely used THz metamaterial absorbers suffer from their narrowband properties and the involvement of complex fabrication techniques.Materials with multifunctional properties,such as adjustable conductivity,broad bandwidth,high flexibility,and robustness,are driving future development to meet THz shielding applications.In this article,a theoretical simulation approach based on finite difference time domain(FDTD)is utilized to study the absorption and shielding characteristics of a two-dimensional(2D)MXene Ti_(3)C_(2)T_(x) metasurface absorber in the THz band.The proposed metamaterial structure is made up of a square-shaped array of MXene that is 50 nmthick and is placed on top of a silicon substrate.The bottom surface of the silicon is metalized with gold to reduce the transmission and ultimately enhance the absorption at 1–3 THz.The symmetric adjacent space between theMXene array results in a widening of bandwidth.The proposed metasurface achieves 96%absorption under normal illumination of the incident source and acquires an average of 25 dB shielding at 1 THz bandwidth,with the peak shielding reaching 65 dB.The results show that 2D MXene-based stacked metasurfaces can be proven in the realization of low-cost devices for THz shielding and sensing applications.展开更多
基金Project supported by the National Key Research and Development Program of China (Grant No.2021YFA1401001)the National Natural Science Foundation of China (Grant No.62371355)。
文摘A 1-bit electronically controlled metasurface reflectarray is presented to achieve beam steering with multiple polarization manipulations. A metsurface unit cell loaded by two PIN diodes is designed. By switching the two PIN diodes between ON and OFF states, the isotropic and anisotropic reflections can be flexibly achieved. For either the isotropic reflection or the anisotropic reflection, the two operation states achieve the reflection coefficients with approximately equal magnitude and 180°out of phase, thus giving rise to the isotropic/anisotropic 1-bit metasurface unit cells. With the 1-bit unit cells, a 12-by-12 metasurface reflectarray is optimally designed and fabricated. Under either y-or x-polarized incident wave illumination, the reflectarray can achieve the co-polarized and cross-polarized beam scanning, respectively, with the peak gains of 20.08 d Bi and 17.26 d Bi within the scan range of about ±50°. With the right-handed circular polarization(RHCP) excitation, the left-handed circular polarization(LHCP) radiation with the peak gain of 16.98 d Bic can be achieved within the scan range of ±50°. Good agreement between the experimental results and the simulation results are observed for 2D beam steering and polarization manipulation capabilities.
基金Project supported by the Joint Fund of Ministry of Education for Equipment Pre-research (Grant No. 8091B032112)the National Natural Science Foundation of China (Grant Nos. 62271243 and 62071215)+2 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Fundamental Research Funds for the Central UniversitiesJiangsu Provincial Key Laboratory of Advanced Manipulating Technique of Electromagnetic Wave
文摘Active metasurfaces with dynamically reconfigurable functionalities are highly demanded in various practical applications.Here,we propose a wideband low-scattering metasurface that can realize an in-band reconfigurable transparent window by altering the operation states of the PIN diodes loaded on the structures.The metasurface is composed of a band-pass frequency selective surface(FSS)sandwiched between two polarization conversion metasurfaces(PCMs).PIN diodes are integrated into the FSS to switch the transparent window,while a checkerboard configuration is applied in PCMs for the diffusive-reflective function.A sample with 20×20 elements is designed,fabricated,and experimentally verified.Both simulated and measured results show that the in-band functions can be dynamically switched between beam-splitting scattering and high transmission by controlling the biasing states of the diodes,while low backscattering can be attained outside the passband.Furthermore,the resonant structures of FSS also play the role of feeding lines,thus significantly eliminating extra interference compared with conventional feeding networks.We envision that the proposed metasurface may provide new possibilities for the development of an intelligent stealth platform and its antenna applications.
基金Project supported by the Natural Science Foundation of Heilongjiang Province of China (Grant No.LH2020A014)the Graduate Students' Research Innovation Project of Harbin Normal University (Grant No.HSDSSCX2022-47)。
文摘We conduct a theoretical analysis of the massive and tunable Goos–Hänchen(GH) shift on a polar crystal covered with periodical black phosphorus(BP)-patches in the THz range. The surface plasmon phonon polaritons(SPPPs), which are coupled by the surface phonon polaritons(SPh Ps) and surface plasmon polaritons(SPPs), can greatly increase GH shifts.Based on the in-plane anisotropy of BP, two typical metasurface models are designed and investigated. An enormous GH shift of about-7565.58 λ_(0) is achieved by adjusting the physical parameters of the BP-patches. In the designed metasurface structure, the maximum sensitivity accompanying large GH shifts can reach about 6.43 × 10^(8) λ_(0)/RIU, which is extremely sensitive to the size, carrier density, and layer number of BP. Compared with a traditional surface plasmon resonance sensor, the sensitivity is increased by at least two orders of magnitude. We believe that investigating metasurface-based SPPPs sensors could lead to high-sensitivity biochemical detection applications.
基金The authors acknowledge the funding provided by the National Key R&D Program of China(2021YFA1401200)Beijing Outstanding Young Scientist Program(BJJWZYJH01201910007022)+2 种基金National Natural Science Foundation of China(No.U21A20140,No.92050117,No.62005017)programBeijing Municipal Science&Technology Commission,Administrative Commission of Zhongguancun Science Park(No.Z211100004821009)This work was supported by the Synergetic Extreme Condition User Facility(SECUF).
文摘Optical neural networks have significant advantages in terms of power consumption,parallelism,and high computing speed,which has intrigued extensive attention in both academic and engineering communities.It has been considered as one of the powerful tools in promoting the fields of imaging processing and object recognition.However,the existing optical system architecture cannot be reconstructed to the realization of multi-functional artificial intelligence systems simultaneously.To push the development of this issue,we propose the pluggable diffractive neural networks(P-DNN),a general paradigm resorting to the cascaded metasurfaces,which can be applied to recognize various tasks by switching internal plug-ins.As the proof-of-principle,the recognition functions of six types of handwritten digits and six types of fashions are numerical simulated and experimental demonstrated at near-infrared regimes.Encouragingly,the proposed paradigm not only improves the flexibility of the optical neural networks but paves the new route for achieving high-speed,low-power and versatile artificial intelligence systems.
基金supported in part by the Joint Funds of the National Natural Science Foundation of China(G02)(Grant No.U1834203)in part by of the Science and Technology Department of Sichuan Province(S01)(Grant No.2020JDTD0009)。
文摘In the modern wireless communication system,the manipulation for polarization of electromagnetic wave plays a important role in improving the capacity and reliability of communication.In this paper,a multifunctional polarization converter(MFPC)based on the multilayer reconfigurable metasurface is proposed,which can assist the source antenna to transmit and receive multiple polarization signals.The MFPC consists of a grating which can filter out the undesired polarization and four layers of metasurfaces incorporated with PIN diodes.The functions of the MFPC include LTC and LTL polarization conversions,co-polarization transmission and reflection for arbitrary polarization.By changing the states of PIN diodes,the functions of MFPC can be dynamically switched.Loaded on the aperture of source antenna,the proposed MFPC can serve as a transmissive array with multiple polarization channels,and can also provide EM protection for source antenna by reflecting the incoming interference waves.Cascading of the metasurfaces produces Fabry-Perot resonance in the MFPC,and it contributes to the realization of LTC and LTL polarization conversions.To verify the performance of the proposed MFPC,the prototype is fabricated and tested.The measured results show that the fractional bandwidths of four functions are all higher than 31.9% with transmission or reflection coefficients higher than-2 d B.The frequency band of each function is mainly concentrated in S-band.The measured data are in agreement with the simulated results.
基金the National Key R&D Program of China(2021YFA1401200)Beijing Outstanding Young Scientist Program(BJJWZYJH01201910007022)+2 种基金National Natural Science Foundation of China(No.U21A20140,No.92050117)Beijing Municipal Science&Technology Commission,Administrative Commission of Zhongguancun Science Park(No.Z211100004821009)X.Li acknowledges the support from Beijing Institute of Technology Research Fund Program for Young Scholars(XSQD-201904005).
文摘Color metasurface holograms are powerful and versatile platforms for modulating the amplitude,phase,polarization,and other properties of light at multiple operating wavelengths.However,the current color metasurface holography can only realize static manipulation.In this study,we propose and demonstrate a multiplexing metasurface technique combined with multiwavelength code-division multiplexing(CDM)to realize dynamic manipulation.Multicolor code references are utilized to record information within a single metasurface and increase the information capacity and security for anticracks.A total of 48 monochrome images consisting of pure color characters and multilevel color video frames were reconstructed in dual polarization channels of the birefringent metasurface to exhibit high information density,and a video was displayed via sequential illumination of the corresponding code patterns to verify the ability of dynamic manipulation.Our approach demonstrates significant application potential in optical data storage,optical encryption,multiwavelengthversatile diffractive optical elements,and stimulated emission depletion microscopy.
基金supported by the National Natural Science Foundation of China (12104326,12104329 and 62105228)Natural Science Foundation of Sichuan Province (2022NSFSC2000)+3 种基金the Opening Foundation of State Key Laboratory of Optical Technologies on Nano-Fabrication and MicroEngineeringfunding by Deutsche Forschungsgemeinschaft (DFG,German Research Foundation) under Germany’s Excellence Strategy–EXC 2089/1–390776260 (e-conversion)the context of the Bavarian Collaborative Research Project Solar Technologies Go Hybrid (SolTech)the support from the China Scholarship Council (CSC)
文摘Optical logic gates play important roles in all-optical logic circuits,which lie at the heart of the next-generation optical computing technology.However,the intrinsic contradiction between compactness and robustness hinders the development in this field.Here,we propose a simple design principle that can possess multiple-input-output states according to the incident circular polarization and direction based on the metasurface doublet,which enables controlled-NOT logic gates in infrared region.Therefore,the directional asymmetric electromagnetic transmission can be achieved.As a proof of concept,a spin-dependent Janus metasurface is designed and experimentally verified that four distinct images corresponding to four input states can be captured in the far-field.In addition,since the design method is derived from geometric optics,it can be easily applied to other spectra.We believe that the proposed metasurface doublet may empower many potential applications in chiral imaging,chiroptical spectroscopy and optical computing.
基金supported by the Science and Technology Projects of Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province(IKKEM)No.HRTP202231partially supported by the Agency for Science,Technology,and Research(A*STAR)under AME IRG Grant Nos.A20E5c0095,and CDF Grant No.C210112044。
文摘As a promising counterpart of two-dimensional metamaterials,metasurfaces enable to arbitrarily control the wavefront of light at subwavelength scale and hold promise for planar holography and applicable multiplexing devices.Nevertheless,the degrees of freedom(DoF)to orthogonally multiplex data have been almost exhausted.Compared with state-of-theart methods that extensively employ the orthogonal basis such as wavelength,polarization or orbital angular momentum,we propose an unprecedented method of peristrophic multiplexing by combining the spatial frequency orthogonality with the subwavelength detour phase principle.The orthogonal relationship between the spatial frequency of incident light and the locally shifted building blocks of metasurfaces can be regarded as an additional DoF.We experimentally demonstrate the viability of the multiplexed holograms.Moreover,this newly-explored orthogonality is compatible with conventional DoFs.Our findings will contribute to the development of multiplexing metasurfaces and provide a novel solution to nanophotonics,such as large-capacity chip-scale devices and highly integrated communication.
基金This work was supported by the National Natural Science Foundation of China(Award No.62175099)Guangdong Basic and Applied Basic Research Foundation(Award No.2023A1515011085)+1 种基金Stable Support Program for Higher Education Institutions from Shenzhen Science,Technology&Innovation Commission(Award No.20220815151149004)Global recruitment program of young experts of China,and startup funding of Southern University of Science and Technology.The authors acknowledge the assistance of SUSTech Core Research Facilities and thank Yao Wang for helpful discussions on fabrication.
文摘Bound states in the continuum(BICs)have exhibited extraordinary properties in photonics for enhanced light-matter interactions that enable appealing applications in nonlinear optics,biosensors,and ultrafast optical switches.The most common strategy to apply BICs in a metasurface is by breaking symmetry of resonators in the uniform array that leaks the otherwise uncoupled mode to free space and exhibits an inverse quadratic relationship between quality factor(Q)and asymmetry.Here,we propose a scheme to further reduce scattering losses and improve the robustness of symmetry-protected BICs by decreasing the radiation density with a hybrid BIC lattice.We observe a significant increase of radiative Q in the hybrid lattice compared to the uniform lattice with a factor larger than 14.6.In the hybrid BIC lattice,modes are transferred toГpoint inherited from high symmetric X,Y,and M points in the Brillouin zone that reveal as multiple Fano resonances in the far field and would find applications in hyperspectral sensing.This work initiates a novel and generalized path toward reducing scattering losses and improving the robustness of BICs in terms of lattice engineering that would release the rigid requirements of fabrication accuracy and benefit applications of photonics and optoelectronic devices.
基金supported by Shenzhen Research Foundation (Grant No. JCYJ20180507182444250)。
文摘Metasurfaces incorporating graphene hold great promise for the active manipulation of terahertz waves. However,it remains challenging to design a broadband graphene-based terahertz metasurface with switchable functionality of half-wave plate(HWP) and quarter-wave plate(QWP). Here, we propose a graphene–metal hybrid metasurface for achieving broadband switchable HWP/QWP in the terahertz regime. Simulation results show that, by varying the Fermi energy of graphene from 0 eV to 1 eV, the function of the reflective metasurface can be switched from an HWP with polarization conversion ratio exceeding 97% over a wide band ranging from 0.7 THz to 1.3 THz, to a QWP with ellipticity above 0.92over 0.78 THz–1.33 THz. The sharing bandwidth reaches up to 0.52 THz and the relative bandwidth is as high as 50%.We expect this broadband and dynamically switchable terahertz HWP/QWP will find applications in terahertz sensing,imaging, and telecommunications.
基金supports from the National Natural Science Foundation of China under Grant Nos.61971435,62101588,62101589Natural Science Basic Research Program of Shaanxi Province(Grant No:2022JM-352,2022JQ-335,2023-JC-YB-069)the National Key Research and Development Program of China(Grant No.:SQ2017YFA0700201).
文摘Complex-amplitude holographic metasurfaces(CAHMs)with the flexibility in modulating phase and amplitude profiles have been used to manipulate the propagation of wavefront with an unprecedented level,leading to higher image-reconstruction quality compared with their natural counterparts.However,prevailing design methods of CAHMs are based on Huygens-Fresnel theory,meta-atom optimization,numerical simulation and experimental verification,which results in a consumption of computing resources.Here,we applied residual encoder-decoder convolutional neural network to directly map the electric field distributions and input images for monolithic metasurface design.A pretrained network is firstly trained by the electric field distributions calculated by diffraction theory,which is subsequently migrated as transfer learning framework to map the simulated electric field distributions and input images.The training results show that the normalized mean pixel error is about 3%on dataset.As verification,the metasurface prototypes are fabricated,simulated and measured.The reconstructed electric field of reverse-engineered metasurface exhibits high similarity to the target electric field,which demonstrates the effectiveness of our design.Encouragingly,this work provides a monolithic field-to-pattern design method for CAHMs,which paves a new route for the direct reconstruction of metasurfaces.
基金supported by the National Natural Science Fundation (Grant Nos. 12134016 and 61625505)Chinese Academy of Sciences (Grant No. ZDBS-LY-JSC025)+1 种基金Sino– Russia International Joint Laboratory of Terahertz Materials and Devices (Grant No. 18590750500)Shanghai Municipal Science and Technology Major Project (Grant No. 2019SHZDZX01)。
文摘Terahertz wave is between microwave and infrared bands in the electromagnetic spectrum with the frequency range from 0.1 THz to 10 THz. Controlling and processing of the polarization state in terahertz wave are the focus due to its great influence on the characteristics. In this paper, a transmissive metasurface terahertz polarization converter is designed in 3D structure with an upper surface of ruler-like rectangular, an intermediate dielectric layer and a lower surface of metal grid wires. Numerical simulations of the converter show that the polarization conversion ratio(PCR) is above 99.9% at 0.288 THz–1.6 THz, the polarization rotation angle(PRA) is close to 90° at 0.06 THz–1.4 THz, and the ellipticity angle(EA) is close to 0° at 0.531 THz–1.49 THz. The origin of the efficient polarization conversion is explained by analyzing the electric field intensity, magnetic field intensity, surface current, electric field energy density, and magnetic field energy density distributions of the converter at 1.19 THz and 0.87 THz, which are consistent with the energy transmittance and transmittance coefficient. In addition, the effects of different thickness and material of intermediate layer, thickness of upper surface material, polarized wave incidence angle, and metasurface materials on the performance of the polarization converter are discussed, and how they affect the conversion performance of the polarization converter are also explained.Our results provide a strong theoretical basis and technical support to develop high performance transmission-type terahertz polarization converters, and play an important role to promote the development of terahertz science and technology.
基金Project supported by the National Key R&D Program of China(Grant No.SKLA02020001A05)。
文摘Real-time polarization medium-wave infrared(MIR)optical imaging systems enable the acquisition of infrared and polarization information for a target.At present,real-time polarization MIR devices face the following problems:poor real-time performance,low transmission and high requirements for fabrication and integration.Herein,we aim to improve the performance of real-time polarization imaging systems in the MIR waveband and solve the above-mentioned defects.Therefore,we propose a MIR polarization imaging system to achieve real-time polarization-modulated imaging with high transmission as well as improved performance based on a pixel-wise metasurface micro-polarization array(PMMPA).The PMMPA element comprises several linear polarization(LP)filters with different polarization angles.The optimization results demonstrate that the transmittance of the center field of view for the LP filters is up to 77%at a wavelength of4.0μm and an extinction ratio of 88 d B.In addition,a near-diffraction-limited real-time MIR imaging optical system is designed with a field of view of 5°and an F-number of 2.The simulation results show that an MIR polarization imaging system with excellent real-time performance and high transmission is achieved by using the optimized PMMPA element.Therefore,the method is compatible with the available optical system design technologies and provides a way to realize real-time polarization imaging in MIR wavebands.
基金Project supported by the National Natural Science Foundation of China (Grant No.61871394)。
文摘Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.
基金supported by the High Level Talent Project of Basic and Applied Basic Research(Natural Science)of Hainan Province in 2019(No.2019RC158)by the Project of the Education Department of Hainan Province(No.Hnky2020ZD-2),all support is gratefully acknowledged.
文摘Simultaneous broadband absorption and polarization conversion are crucial in many practical applications,especially in terahertz communications.Thus,actively tunable metamaterial systems can exploit the graphene-based nanomaterials derived from renewable resources because of the flexible surface conductivity and selective permeability of the nanomaterials at terahertz frequencies.In this paper,we propose a graphene-based active tunable bifunctional metasurface for dynamic terahertz absorption and polarization conversion.The graphene ring presents a certain opening angle(A)along the diagonal of the xoy plane.When A=0°,the proposed metasurface behaves as a broadband absorber.Numerical results show the feasibility of achieving this polarization-insensitive absorber with nearly 100%absorptance,and the bandwidth of its 90%absorptance is 1.22 THz under normal incidence.Alternatively,when A=40°after optimization,the proposed metasurface serves as a broadband polarization convertor,resulting in robust broadband polarization conversion ratio(PCR)curves with a bandwidth surpassing 0.5 THz in the reflection spectrum.To tune the PCR response or the broad absorption spectrum of graphene,we change the Fermi energy of graphene dynamically from 0 to 0.9 eV.Furthermore,both the broadband absorption and the linear polarization conversion spectra of the proposed metasurface exhibit insensitivity to the incident angle,allowing large incident angles within 40°under high-performance operating conditions.To demonstrate the physical process,we present the impedance matching theory and measure electric field distributions.This architecture in the THz frequency range has several applications,such as in modulators,sensors,stealth,and optoelectronic switches.THz wave polarization and beam steering also have broad application prospects in the field of intelligent systems.
基金the National Natural Science Foundation of China(Grant Nos.12174240,11674206,and 11874253)the Natural Science Basic Research Plan in the Shaanxi Province of China(Grant No.2023-JC-QN-0049).
文摘Source illusion is an important issue in acoustic fields that has significant applications in various practical scenarios.Recent progress in acoustic metasurfaces has broken the limitation of manipulating large-scale waves at subwavelength scales and enables a better illusion capability,while there is still a problem that most previous studies are hampered by a lack of tuning capability.Here we propose a reconfigurable source illusion device capable of providing azimuthallydependent phase delay in real-time via changing the static voltage distribution.The resulting device is implemented by employing an adjustable piezoelectric metasurface with a subwavelength thickness that can achieve a full 2π-phase shift while maintaining efficient transmittance.The effectiveness of our mechanism is demonstrated via two distinctive source illusion phenomena of shifting and transforming a simple point source without changing the device geometry.We anticipate that our methodology,which does not require a large device size or a complicated phased array,will open up new avenues for the miniaturization and integration of source illusion devices and may promote their on-chip applications in a variety of fields,such as acoustic camouflage and manipulation precision.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62075173 and 12274478)the National Key Research and Development Program of China(Grant Nos.2021YFB2800302 and 2021YFB2800604).
文摘Polarization manipulation of light is of great importance because it could promote development of wireless communications,biosensing,and polarization imaging.In order to use natural light more efficiently,it is highly demanded to design and fabricate high performance asymmetric polarization converters which could covert the natural light to one particular linearly polarized light with high efficiency.Traditionally,polarizers could be achieved by controllers with crystals and polymers exhibiting birefringence.However,the polarizers are bulky in size and the theoretical conversion efficiency of the polarizers is limited to 0.5 with unpolarized light incidence.In this paper,we propose a polarization converter which could preserve high transmission for one linearly polarized light and convert the orthogonal linearly polarized light to its cross-polarized with high transmittance based on a multi-layer chiral metasurface.Theoretical results show that normally incident y-polarized light preserves high transmittance for the wavelength range from 685 nm to 800 nm while the orthogonal normally incident x-polarized light is efficiently converted to the y-polarized light with high transmittance from 725 nm to 748 nm.Accordingly,for unpolarized light incidence,transmittance larger than 0.5 has been successfully achieved in a broadband wavelength range from 712 nm to 773 nm with a maximum transmittance of 0.58 at 732 nm.
基金financially supported by National Natural Science Foundation of China(No.12175050)the Foundation of National Key Laboratory of Electromagnetic Environment of China(No.202101003)。
文摘In order to solve the thickness dependence of plasma absorption of electromagnetic waves and further reduce the backward radar scattering cross section(RCS)of the target,we designed a novel composite structure of a metasurface and plasma.A metasurface with three absorption peaks is designed by means of an equivalent circuit based on an electromagnetic resonance type metamaterial absorber.The reflection and absorption of the composite structure are numerically and experimentally verified.The finite integration method was used to simulate a composite structure of finite size to obtain the RCS.The experimental measurements of electromagnetic wave reflection were conducted by a vector network analyzer(Keysight N5234A)and horn antennas,etc.The research showed that the absorption capacity of this composite structure was substantially improved compared to either the plasma or the metasurface,and it is more convenient for application due to its low plasma thickness requirement and easy fabrication.
基金the National Natural Science Foundation of China(61901493,61901492,61801485)the Natural Science Foundation of Hunan Province(2020JJ5676).
文摘The electric-controlled metasurface antenna array(ECMSAA)with ultra-wideband frequency reconfigurable reflection suppression is proposed and realized.Firstly,an electriccontrolled metasurface with ultra-wideband frequency reconfigurable in-phase reflection characteristics is designed.The element of the ECMSAA is constructed by loading the single electric-controlled metasurface unit on the conventional patch antenna element.The radiation properties of the conventional patch antenna and the reflection performance of electric-controlled metasurface are maintained when the antenna and the metasurface are integrated.Thus,the ECMSAA elements have excellent radiation properties and ultra-wideband frequency reconfigurable in-phase reflection characteristics simultaneously.To take a further step,a 6×10 ECMSAA is realized based on the designed metasurface antenna element.Simulated and measured results prove that the reflection of the ECMSAA is dynamically suppressed in the P and L bands.Meanwhile,high-gain and multi-polarization radiation properties of the ECMSAA are achieved.This design method not only realizes the frequency reconfigurable reflection suppression of the antenna array in the ultra-wide frequency band but also provides a way to develop an intelligent low-scattering antenna.
基金This research is funded by Abu Dhabi Award for Research Excellence(AARE19-245).
文摘With the advancement of technology,shielding for terahertz(THz)electronic and communication equipment is increasingly important.The metamaterial absorption technique is mostly used to shield electromagnetic interference(EMI)in THz sensing technologies.The most widely used THz metamaterial absorbers suffer from their narrowband properties and the involvement of complex fabrication techniques.Materials with multifunctional properties,such as adjustable conductivity,broad bandwidth,high flexibility,and robustness,are driving future development to meet THz shielding applications.In this article,a theoretical simulation approach based on finite difference time domain(FDTD)is utilized to study the absorption and shielding characteristics of a two-dimensional(2D)MXene Ti_(3)C_(2)T_(x) metasurface absorber in the THz band.The proposed metamaterial structure is made up of a square-shaped array of MXene that is 50 nmthick and is placed on top of a silicon substrate.The bottom surface of the silicon is metalized with gold to reduce the transmission and ultimately enhance the absorption at 1–3 THz.The symmetric adjacent space between theMXene array results in a widening of bandwidth.The proposed metasurface achieves 96%absorption under normal illumination of the incident source and acquires an average of 25 dB shielding at 1 THz bandwidth,with the peak shielding reaching 65 dB.The results show that 2D MXene-based stacked metasurfaces can be proven in the realization of low-cost devices for THz shielding and sensing applications.