期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Microscopic production characteristics of crude oil in nano-pores of shale oil reservoirs during CO_(2)huff and puff 被引量:2
1
作者 HUANG Xing LI Xiang +2 位作者 ZHANG Yi LI Tiantai ZHANG Rongjun 《Petroleum Exploration and Development》 CSCD 2022年第3期636-643,共8页
The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between rela... The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between relaxation time(T_(2))and pore size is calibrated.Nuclear magnetic resonance experiments of CO_(2)huff and puff in shale samples are carried out to study the effects of gas injection pressure,soaking time and fractures on the oil production characteristics of shale pores from the micro scale.The recovery degrees of small pores(less than or equal to 50 nm)and large pores(greater than 50 nm)are quantitatively evaluated.The experimental results show that the recovery degree of crude oil in large pores increases rapidly with the increase of injection pressure under immiscible conditions,and the effect of injection pressure rise on recovery degree of large pores decreases under miscible conditions;whether miscible or not,the recovery degree of crude oil in small pores basically maintains a linear increase with the increase of injection pressure,and the lower size limit of pores in which oil can be recovered by CO_(2)decreases with the increase of gas injection pressure;with the increase of soaking time,the recovery degree of crude oil in large pores increases slowly gradually,while the recovery degree of crude oil in small pores increases faster and then decelerates,and the best soaking time in the experiments is about 10 h;the existence of fractures can enhance the recovery degrees of crude oil in small pores and large pores noticeably. 展开更多
关键词 shale oil CO_(2)huff and puff nuclear magnetic resonance micro-pore structure oil displacement efficiency influence factor
下载PDF
微多孔结构内流动沸腾及束缚水作用机理:孔隙尺度实验及换热强化
2
作者 胡皓玮 姜培学 +1 位作者 黄峰 胥蕊娜 《Science Bulletin》 SCIE EI CSCD 2021年第18期1885-1894,M0004,共11页
为解决高温部件的散热问题,流动沸腾技术被广泛应用于大功率设备热管理领域,采用多孔涂层和多孔材料可以进一步提高换热效果.与通道中的沸腾过程不同,由于孔隙-喉道结构复杂、流体流动方向随机性大,多孔结构内气固液三相作用规律尚不明... 为解决高温部件的散热问题,流动沸腾技术被广泛应用于大功率设备热管理领域,采用多孔涂层和多孔材料可以进一步提高换热效果.与通道中的沸腾过程不同,由于孔隙-喉道结构复杂、流体流动方向随机性大,多孔结构内气固液三相作用规律尚不明确,换热面存在液体蒸干、壁温飞升、材料烧毁等风险.为深入研究微多孔结构内部流动沸腾传热性能,本文搭建了微观模型可视化实验系统,以揭示多孔介质内束缚水的运移机理,并量化相变过程中束缚水的运输形式及其对流动沸腾的影响规律.利用激光诱导荧光和粒子追踪技术获得了液膜在多孔骨架表面的运动速度.通过理论分析,作者发现薄液膜流动受到相邻两液桥间毛细压力差驱动,且毛细效应引起的液桥和薄液膜流动对冷却液向受热表面的输送起着重要作用.进而作者提出了一种孔喉尺寸在10~90μm的不规则多孔结构.该结构实现了传热系数5%~10%的提高,同时压降降低了5%~23%,有助于维持冷却系统高效稳定运行,为多孔材料强化流动沸腾表面结构的设计提供了重要参考. 展开更多
关键词 Flow boiling micro-porous structure Trapped liquid Liquid bridge Film flow Heat transfer enhancement
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部