期刊文献+
共找到11,264篇文章
< 1 2 250 >
每页显示 20 50 100
Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains
1
作者 董得福 WANG Wei +3 位作者 ZHAN Chun LI Chenglong ZHOU Qisheng 肖生强 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第2期268-281,共14页
By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared h... By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution. 展开更多
关键词 conjugated polymer molecular weight MICROSTRUCTURE thermoelectric performance
原文传递
Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells
2
作者 Hyo-Geun Lee D.P.Nagahawatta +4 位作者 M.J.M.S.Kurera Kyung-Mo Song Yun-Sang Choi You-Jin Jeon Min-Cheol Kang 《Food Science and Human Wellness》 SCIE CAS CSCD 2024年第4期2244-2252,共9页
Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunb... Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions. 展开更多
关键词 Sargassum thunbergii Low molecular weight polysaccharide Lipid accumulation OBESITY Liver steatosis
下载PDF
Pharmacokinetics of fucoidan and low molecular weight fucoidan from Saccharina japonica after oral administration to mice
3
作者 Jiaojiao TAN Yimin SONG +3 位作者 Jing WANG Ning WU Yang YUE Quanbin ZHANG 《Journal of Oceanology and Limnology》 SCIE CAS CSCD 2023年第5期1900-1909,共10页
The brown seaweed,Sacchairna japonica,has been used in traditional Chinese medicine for over one thousand years.Oral administration of fucoidan or low molecular weight fucoidan(LMWF)from S.japonica could ameliorate ki... The brown seaweed,Sacchairna japonica,has been used in traditional Chinese medicine for over one thousand years.Oral administration of fucoidan or low molecular weight fucoidan(LMWF)from S.japonica could ameliorate kidney dysfunction in chronic kidney diseases and inhibit diabetic vascular complications.In many studies,LMWF was found to be more potent than fucoidan with high molecular weight.However,the pharmacokinetics of LMWF still remains unclear.The purpose of the research is to compare the pharmacokinetics of fucoidan with high molecular weight(136 kDa)with that low molecular weight(9.5 kDa)after oral administration to ICR mice.Since fucose is the main and representative monosaccharide of fucoidans,we evaluate the pharmacokinetics of fucoidan and LMWF by determining the fucose concentration in mice serum.Both fucoidan and LMWF were absorbed following oral administration.Fucoidan and LMWF were provided to mice by oral administration with 60 mg/kg and the maximum Concentration(C_(max))was found at 2.5 h(0.66±0.32 mg/L)for Fucoidan and 1.5 h(1.01±0.56 mg/L)for LMWF,respectively.It seems that LMWF had a higher area under the curve(AUC_(0–t))and was absorbed more quickly than fucoidan.The estimated bioavailability of LMWF was28.3%in the mice treated with a single dose of 30 mg/kg.In addition,LMWF was found widely spreaded into different tissues following oral administration and the highest concentration was found in kidney at 19.93±7.02μg/g.In this study,we first studied the pharmacokinetics of LMWF,in order to help to understand the function of LMWF.And our results shed light on the potential of development of drugs based on LMWF. 展开更多
关键词 FUCOIDAN low molecular weight fucoidan PHARMACOKINETICS BIOAVAILABILITY tissue distribution
下载PDF
Structural characterizations andα-glucosidase inhibitory activities of four Lepidium meyenii polysaccharides with different molecular weights
4
作者 Luan Wen Zhou-Wei Wu +3 位作者 Li-Wu Lin Abdulbaset Al-Romaima Xing-Rong Peng Ming-Hua Qiu 《Natural Products and Bioprospecting》 CSCD 2023年第1期568-576,共9页
Four polysaccharides(MCPa,MCPb,MCPc,MCPd)were obtained from Lepidium meyenii Walp.Their structures were characterized by chemical and instrumental methods including total sugar,uronic acid and protein content determi-... Four polysaccharides(MCPa,MCPb,MCPc,MCPd)were obtained from Lepidium meyenii Walp.Their structures were characterized by chemical and instrumental methods including total sugar,uronic acid and protein content determi-nation,UV,IR and NMR spectroscopy,as well as monosaccharide composition determination and methylation analy-ses.Four polysaccharides were a group of glucans with different molecular weights ranging from 3.12 to 14.4 kDa,and shared a similar backbone chain consisting of(1→4)-glucose linkages with branches attached to C-3 and C-6.Furthermore,bioactivity assay showed that MCPs had concentration-dependent inhibitory activity onα-glucosidase.MCPb(Mw=10.1 kDa)and MCPc(Mw=5.62 kDa)with moderate molecular weights exhibited higher inhibitory activ-ity compared with MCPa and MCPd. 展开更多
关键词 Lepidium meyenii POLYSACCHARIDE molecular weight Structural characterization α-Glucosidase inhibition
下载PDF
Purification and immunoglobulin E epitopes identification of low molecular weight glutenin:an allergen in Chinese wheat
5
作者 Yanbo Wang Yihang Tong +2 位作者 Jinru Zhou Dong Yang Linglin Fu 《Food Science and Human Wellness》 SCIE CSCD 2023年第3期720-727,共8页
As one of the most important cereals,wheat(Triticum aestivum)has high nutritional value and is widely cultivated in China.However,wheat can cause severe allergic reactions,and a growing number of people are developing... As one of the most important cereals,wheat(Triticum aestivum)has high nutritional value and is widely cultivated in China.However,wheat can cause severe allergic reactions,and a growing number of people are developing allergies to Chinese wheat.Low molecular weight glutenin(LMW-GS),an important allergen in susceptible populations,is responsible for celiac disease and wheat contacts dermatitis.In this study,LMW-GS was highly purified from Chinese wheat(Xiaoyan 6)and further identified and characterized.In addition,8 peptides were predicted efficiently by 5 immunological tools,among which 5 peptides showed significant immunoglobulin E binding abilities.Two specific epitopes were found to be in the non-conserved region of the amino acid sequence of LMW-GS,which was speculated to be the specific epitope of Chinese wheat.This systematic research of LMW-GS may provide new insights into the prevention of wheat allergy and development of hypoallergenic wheat products. 展开更多
关键词 Triticum aestivum ALLERGEN Low molecular weight glutenin(LMW-GS) Immunological tools
下载PDF
Determination and Temperature Dependence of Plateau Modulus for Polymerization of Propylene to Isotactic Polypropylene with Ultra-high Molecular Weight under Catalysis of Ziegler-Natta Catalyst 被引量:1
6
作者 DINGJian DINGXue-jia XURi-wei YUDing-sheng 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2005年第2期227-231,共5页
The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight(UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means ... The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight(UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means of oscillatory rheometry at 180 and 200 ℃, whose loss modulus(G″) plots at 180 and 200 ℃ versus the natural logarithm of angular frequency(ω) present a pronounced maximum at 34.35 and 69.21 rad/s, respectively, and do not show a maximum peak at 0.01-100 rad/s for Ziegler-Natta catalyzing ethylene-propylene random copolymerization(PPR) with a conventional molecular weight and broad MWD. The fact indicates that the high molecular weight is responsible for a maximum peak of G″(ω) vs. lnω curves for UHPPH. This makes it possible to determine the plateau modulus(G 0_N) of UHPPH from a certain experimental temperature G″(ω) curve directly. For UHPPH, the G 0_N determined to be 4.28×10 5 and 3.62×10 5 Pa at 180 and 200 ℃, respectively, decreases with the increase of temperature and is independent of the molecular weight, which directly confirms reputation theoretical prediction that the G 0_N has no relation to the molecular weight. 展开更多
关键词 Isotactic polypropylene Ultra-high molecular weight Broad molecular weight distribution Plateau modulus
下载PDF
Molecular Weight and Distribution of Cellulose and Cellulose Microspheres 被引量:1
7
作者 Zefen WANG Kelin HUANG +4 位作者 Ben WANG Rui WU Jing TAO Xiaoyu PENG Dankui LIAO 《Agricultural Biotechnology》 CAS 2012年第1期44-46,共3页
[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with vi... [ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with viscosity method and gel permeation chromatography (GPC) method. [ Method] In viscosity method, cadmium ethylenediamine was used as the solvent, intrinsic viscosity η of the solution was determined at 25 ℃ by using a Ubbelohde viscometer, to calculate the molecular weight of cellulose; in GPC method, 8% LiC1 / N, N-dimethylacetamide (LiC1/DMAc) was used as the solvent and 0.5% LiC1/DMAc was used as the mobile phase to determine the relative molecular weight and distribution of cellulose and cellulose microspheres. In addition, the determination results were analyzed to compare these two methods. [ Result ] Viscosity-average molecular weight Mr/ of cellulose and cellulose microspheres determined with viscosity method were 224,532 and 16,686, respectively; weight-average molecular weight Mw of cellulose and cellulose microspheres determined with GPC method were 284,196 and 22,345, respectively. [ Conclusion] The determination results of (;PC method are relatively close to the actual value and could truly reflect the characteristics of molecular weialat distribution of eellulose and cellulose mierosr, heres. 展开更多
关键词 Cellulose microspheres Viscosity method GPC method molecular weight molecular weight distribution
下载PDF
Analysis of Molecular Weight Distribution and Antioxidant Activities of Cirrhinus molitorella Skin Collagen Hydrolysates
8
作者 霍建新 白彩艳 赵征 《Agricultural Science & Technology》 CAS 2014年第5期738-741,800,共5页
[Objective] The aim of this work was to identify molecular weight (MW) distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both... [Objective] The aim of this work was to identify molecular weight (MW) distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry (MALDI-TOF-MS). Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants. 展开更多
关键词 Collagen hydrolysates Cirrhinus molitorella molecular weight distribution Alkaline protease 2709
下载PDF
The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution
9
作者 Keisuke Maeda Koji Yamada +2 位作者 Kazushi Yamada Masaya Kotaki Hiroyuki Nishimura 《Advances in Materials Physics and Chemistry》 2016年第1期1-8,共8页
Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-... Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-core structure affects the property of completed injection molding parts (bulk property) even if in thin-wall injection molding. However, there is a few research about the relationship between bulk property and internal property distribution in the injection molding specimen. In this study, thin-wall injection molded parts of polypropylene (PP) were prepared by 4 different molecular weight and molecular weight distribution to reveal the relationship between bulk property and property distribution. These characteristics were investigated by using tensile test, fracture toughness characterized by Essential Work of Fracture (EWF) method for bulk property and film tensile test by sliced sample for tensile property distribution. The property distribution test results revealed that the highly bulk property sample had thicker highly mechanical property layer on its surface. 展开更多
关键词 molecular weight molecular weight Distribution Fracture Toughness Property Distribution Thin-Wall Injection Molding
下载PDF
Study on the influence of humic acid of different molecular weight on basic ion exchange resin's adsorption capacity 被引量:8
10
作者 Jin Nan Wang Ai Min Li Yang Zhou Li Xu 《Chinese Chemical Letters》 SCIE CAS CSCD 2009年第12期1478-1482,共5页
In this paper, humic acid (HA) was ultra-filtered into different molecular weight sections and was characterized by multielement analysis, UV254/TOC, FT-IR and three-dimensional fluorescence spectrometric. Since hum... In this paper, humic acid (HA) was ultra-filtered into different molecular weight sections and was characterized by multielement analysis, UV254/TOC, FT-IR and three-dimensional fluorescence spectrometric. Since humic acids of different molecular weights have different hydrophilic and molecular size, the maximum adsorption capacity of basic ion exchange resins appears on the humic acid whose molecular weight ranges from 6000 to 10,000 Da. 展开更多
关键词 Humic acid molecular weight Basic ion exchange resin ADSORPTION
下载PDF
Biosynthesis of poly-3-hydroxybutyrate with a high molecular weight by methanotroph from methane and methanol 被引量:6
11
作者 Yingxin Zhang Jiaying Xin +2 位作者 Linlin Chen Hao Song Chungu Xia 《Journal of Natural Gas Chemistry》 EI CAS CSCD 2008年第1期103-109,共7页
Poly-3-hydroxybutyrate (PHB) can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and... Poly-3-hydroxybutyrate (PHB) can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol (0.1%) was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages: a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients (ammonium, nitrate, phosphorus, copper, iron (Ⅲ), magnesium or ethylenediamine tetraacetate (EDTA)) in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle (TCA). It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% (w/w) from the initial yield of 12% (w/w) after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da. 展开更多
关键词 poly-3-hydroxybutyrate METHANOTROPHS METHANE METHANOL cultivation biosynthesis high molecular weight
下载PDF
Study on Enzymatic Hydrolysis of Gadus morrhua Skin Collagen and Molecular Weight Distribution of Hydrolysates 被引量:8
12
作者 HUO Jian-xin ZHAO Zheng 《Agricultural Sciences in China》 CAS CSCD 2009年第6期723-729,共7页
Process parameters on enzymatic hydrolysis and molecular weight (MW) distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor... Process parameters on enzymatic hydrolysis and molecular weight (MW) distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum (HPLC-ESI-MS). Collagen hydrolysates were first gained by an alkaline protease "alcalase" for 3 h at temperature (50~C), pH (10.0), substrate concentration (75 g L-~), and E/S (3%). The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates. 展开更多
关键词 collagen hydrolysates Gadus morrhua molecular weight distribution alkaline protease
下载PDF
Efficacy and Safety of Low Molecular Weight Heparin Prophylaxis for Venous Thromboembolism Following Lumbar Decompression Surgery 被引量:12
13
作者 Zhi-jian Sun Yu Zhao Giu-xing Qiu Yi-peng Wang Xi-sheng Weng Hong Zhao Jian-xiong Shen Yu Jiang Ye Li Xiang Li 《Chinese Medical Sciences Journal》 CAS CSCD 2011年第4期221-226,共6页
Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE... Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE who underwent lumbar spine surgery in Peking Union Medical College Hospital from January 2004 to April 2011 were included in the present study. All the patients received a half dose of LMWH 6 hours after surgery followed by a full dose LMWH once per day until discharge. We recorded incidences of deep venous thrombosis (DVT), pulmonary embolism (PE), bleeding complications, and medication side effects. Results Seventy-eight consecutive patients were eligible and enrolled in this study. The mean hospital stat was 8.5±4.5 days. No symptomatic DVT, PE, or major bleeding events were observed. One patient developed wound ecchymosis, another developed wound bleeding, four had mild hepatic aminotransferase level elevation, and one developed a suspicious allergic reaction. Conclusion LMWH may be applied as an effective and safe prophylaxis for VTE in high-risk patients undergoing lumbar decompression surgery. 展开更多
关键词 venous thromboembolism PROPHYLAXIS low molecular weight heparin lumbar decompression surgery
下载PDF
STRUCTURE,MOLECULAR WEIGHT AND BIOACTIVITIES OF(1→3)-β-D-GLUCANS AND ITS SULFATED DERIVATIVES FROM FOUR KINDS OF LENTINUS EDODES 被引量:5
14
作者 UnursaikhanSurenjav 张俐娜 +3 位作者 Xiao-juanXu MeiZhang PeterChiKeungCheung Fan-boZeng 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2005年第3期327-336,共10页
Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the pro... Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the protein in orderto obtain free protein glucans coded as LNP-I_1,LNP-I_2.LNP-I_3 and LNP-I_4(LNP-I).The free-protein polysaccharideswere sulfated to give derivatives(S-LNP-I)with degree of substitution(DS)from 0.4-0.8.The structural features andweight-average molecular weight(M_w)of the samples were investigated by using infrared spectroscopy,elemental analysis,^(13)C-NMR,size exclusion chromatography combined with laser light scattering(SEC-LLS)and viscometry.The effects ofstructure and conformation of the polysaccharides on antitumor activities were assayed in vivo(Sarcoma 180 solid tumors)and in vitro(Sarcoma 180,HL-60,MCF-7 and Vero tumors).The results indicated that the predominant species of thesamples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethylsulfoxide(DMSO)as single-flexible chains.Interestingly,the antitumor activities of LNP-I are lower than those of the nativeglucans(L-I),whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I.The resultsreveal that the binding of protein,sulfated modification and the triple helix conformation are important factors in theenhancement of the antitumor activities of polysaccharides on the whole. 展开更多
关键词 (1→3)-β-D-glucans Lentinus Edodes molecular weight PROTEIN Sulfated derivative Antitumor activity.
下载PDF
A HIGHLY ACTIVE NEODYMIUM CHLORIDE ISOPROPANOL COMPLEX/MODIFIED METHYLALUMINOXANE CATALYST FOR PREPARING POLYISOPRENE WITH HIGH CIS-1,4 STEREOSPECIFICITY AND NARROW MOLECULAR WEIGHT DISTRIBUTION 被引量:5
15
作者 董伟民 张学全 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2010年第2期157-164,共8页
Neodymium chloride isopropanol complex (NdCl3.3'prOH) activated by modified methylaluminoxane (MMAO) was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum (Al) compounds, [Al... Neodymium chloride isopropanol complex (NdCl3.3'prOH) activated by modified methylaluminoxane (MMAO) was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum (Al) compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3'3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity (〉 96%), very high molecular weight (Mn 〉 1.0 × 10^6) and fairly narrow molecular weight distribution (MWD, Mw/Mn 〈 2.0) simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD (Mw/Mn = 2.07), but somewhat low cis-1,4 content (ca. 92%), while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al(i-Bu)3 〉 MMAO 〉 Al(i-Bu)2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI(i-Bu)3 and AI(i-Bu)EH yielded polymers with low Mn (1.0 × 10^5-8.0 × 10^5). NdCl3·3'PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily. 展开更多
关键词 ISOPRENE NEODYMIUM molecular weight distribution Cis-1 4 stereospecificity Ziegler-Natta polymerization.
下载PDF
PREPARATION OF MICROPOROUS ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) BY THERMALLY INDUCED PHASE SEPARATION OF A UHMWPE/LIQUID PARAFFIN MIXTURE 被引量:7
16
作者 沈烈 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2008年第6期653-657,共5页
Ultra-high molecular weight polyethylene (UHMWPE) with a microporous structure was prepared via thermally induced phase separation (TIPS).Liquid paraffin (LP) was used as a diluent in the preparation of microporous UH... Ultra-high molecular weight polyethylene (UHMWPE) with a microporous structure was prepared via thermally induced phase separation (TIPS).Liquid paraffin (LP) was used as a diluent in the preparation of microporous UHMWPE. Small angle laser light scattering (SALLS) and differential scanning calorimetry (DSC) were used to determine the phase separation temperatures,i.e.the cloud points and the dynamic crystallization temperatures,respectively.It was found that the cloudI points were coincident with the cryst... 展开更多
关键词 Ultra high molecular weight polyethylene Thermally induced phase separation Liquid paraffin.
下载PDF
Studies on Human Immunoglobulin G from GBS Patient (Ⅲ)-The Determination of Molecular Weight of Human Immunoglobulin G by Capillary SDS Gel Electrophoresis 被引量:5
17
作者 Qin Hua RU Yi Ming WANG Guo An LUO(Department of Chemistry. School of Life Science and Engineering,Tsinghua University. Beijing, 100084) 《Chinese Chemical Letters》 SCIE CAS CSCD 1999年第1期55-58,共4页
Guillain-Barre syndrome (GBS) is considered to be an autoimmune disorder of peripheralnervous system. In this paper. capillary SDS gel electrophoresis was performed on neutral coatedfused-silica capillary to determine... Guillain-Barre syndrome (GBS) is considered to be an autoimmune disorder of peripheralnervous system. In this paper. capillary SDS gel electrophoresis was performed on neutral coatedfused-silica capillary to determine the molecular weight of purified IgG samples from GBS patient. 展开更多
关键词 Immunoglobulin G Guillain-Barre syndrome Capillary SDS gel electrophoresis molecular weight of protein
下载PDF
Biodegraded Oil and Its High Molecular Weight (C_(35+)) n-alkanes in the Qianmiqiao Region in the Bohai Bay Basin, Northern China 被引量:4
18
作者 WANGTieguan ZHUDan +2 位作者 LUHong ZHANGZhihuan YANGChiyin 《Acta Geologica Sinica(English Edition)》 SCIE CAS CSCD 2004年第4期993-1001,共9页
With a production of 208.2 m3/d, heavy oil was produced by drill stem test (DST) from three shallow reservoirs in Sand Group Nos. Ⅰ and Ⅲ of the Neogene Guantao Formation (NgⅠ and NgⅢ) and the Eogene Dongying Form... With a production of 208.2 m3/d, heavy oil was produced by drill stem test (DST) from three shallow reservoirs in Sand Group Nos. Ⅰ and Ⅲ of the Neogene Guantao Formation (NgⅠ and NgⅢ) and the Eogene Dongying Formation (Ed) in an exploratory well Ban-14-1 within the Qianmiqiao region, Bohai Bay Basin, northern China. Based on the GC and GC-MS data of the NgⅠ and NgⅢ heavy oil samples, all n-alkanes and most isoprenoid hydrocarbons are lost and the GC baseline appears as an evident 'hump', implying a large quantity of unresolved complex mixture (UCM), which typically revealed a result of heavy biodegradation. However, there still is a complete series of C14-C73 n-alkanes in the high-temperature gas chromatograms (HTGC) of the heavy oil, among which, the abundance of C30- n-alkanes are drastically reduced. The C35-C55 high molecular weight (HMW) n-alkanes are at high abundance and show a normal distribution pattern with major peak at C43 and an obvious odd-carbon-number predominance with CPI37-55 and OEP45-49 values of 1.17 and 1.16-1.20, respectively. According to GC-MS analysis, the heavy oil is characterized by dual source inputs of aquatic microbes and terrestrial higher plants. Various steranes and tricyclic terpanes indicate an algal origin, and hopane-type triterpanes, C24 tetracyclic terpane and drimane series show the bacterial contribution. With the odd-carbon-number preference, HMW n-alkanes provide significant information not only on higher plant source input and immaturity, but also on the strong resistibility to biodegradation. 展开更多
关键词 high-temperature gas chromatography (HTGC) high molecular weight (HMW) n-alkane BIODEGRADATION heavy oil Bohai Bay Basin China
下载PDF
Structure and Properties of Self-reinforced Material Made from Ultra-high Molecular Weight Polyethylene-montmorillonite Nanocomposite 被引量:3
19
作者 WANGQing-zhao LIAOXian-ling LIUZong-lin 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2004年第4期504-510,共7页
High-strength and high-modulus ultra-high molecular weight polyethylene(UHMWPE), named self-reinforced material, was obtained by the elongation of UHMWPE-montmorillonite nanocomposite at melting temperature. According... High-strength and high-modulus ultra-high molecular weight polyethylene(UHMWPE), named self-reinforced material, was obtained by the elongation of UHMWPE-montmorillonite nanocomposite at melting temperature. According to the scanning electron microscope(SEM) analysis, a great deal of fibrillar texture formed in the direction of elongation, and the tensile fractured surface was similar to that of highly oriented fiber. The transmission electron microscope(TEM) and selective area electron diffraction(SAED) analyses reveal that the reinforced phase of the self-reinforced material is an extended chain crystal and its size is about 50_200 nm wide and several microns long, and the montmorillonite layers are broken up to pieces in the size from 100 to 10 nm. The broken layers which have a huge surface area interacting strongly with macromolecules reduces the entanglement density of UHMWPE and induces the chain orientation in flow field. It is supposed that the astriction of montmorillonite layers to polyethylene chains is not only end-tethered but also side-tethered. The differential scan calorimetry(DSC) analysis shows that there are two endothermal peaks for the self-reinforced material, of which the peak at a higher temperature(136.4 ℃) is ascribed to the melting of the reinforced phase. 展开更多
关键词 Ultra-high molecular weight polyethylene-montmorillonite nanocomposite ELONGATION Self-reinforced material Properties Structure
下载PDF
Antiaging activity of low molecular weight peptide from Paphia undulate 被引量:2
20
作者 陈忻 蔡冰娜 +3 位作者 陈华 潘剑宇 陈得科 孙恢礼 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2013年第3期570-580,共11页
Low molecular weight peptide (LMWP) was prepared from clam Paphia undulate and its antiaging effect on D-galactose-induced acute aging in rats, aged Kunming mice, ultraviolet-exposed rats, and thermally injured rats w... Low molecular weight peptide (LMWP) was prepared from clam Paphia undulate and its antiaging effect on D-galactose-induced acute aging in rats, aged Kunming mice, ultraviolet-exposed rats, and thermally injured rats was investigated. P. undulate flesh was homogenized and digested using papain under optimal conditions, then subjected to Sephadex G-25 chromatography to isolate the LMWP. Administration of LMWP significantly reversed D-galactose-induced oxidative stress by increasing the activities of glutathione peroxidase (GPx) and catalase (CAT), and by decreasing the level of malondialdehyde (MDA). This process was accompanied by increased collagen synthesis. The LMWP prevented photoaging and promoted dermis recovery and remission of elastic fiber hyperplasia. Furthermore, treatment with the LMWP helped to regenerate elastic fibers and the collagen network, increased superoxide dismutase (SOD) in the serum and significantly decreased MDA. Thermal scald-induced inflammation and edema were also relieved by the LWMP, while wound healing in skin was promoted. These results suggest that the LMWP from P. undulate could serve as a new antiaging substance in cosmetics. 展开更多
关键词 Paphia undulate low molecular weight peptide ANTIAGING antiultraviolet radiation skin woundhealing in scald rats
原文传递
上一页 1 2 250 下一页 到第
使用帮助 返回顶部