Polymer blends based on recycled high density polyethylene (rHDPE) and recycled poly(ethylene terephthalate) (rPET) with and without ethylene-glycidyl methacrylate copolymer (E-GMA) as compatibilizer were fabricated i...Polymer blends based on recycled high density polyethylene (rHDPE) and recycled poly(ethylene terephthalate) (rPET) with and without ethylene-glycidyl methacrylate copolymer (E-GMA) as compatibilizer were fabricated in a co-rotating twin screw extruder. The effects of rPET and compatibilizer content on the mechanical properties and morphological stability of rHDPE-rich blends were investigated. The rHDPE/rPET (75/25 wt/wt) blend compatibilized with 5 php (per 100 part of polymer) E-GMA showed an enhancement of about 7% - 26% in tensile properties and flexural strength as compared with those of the neat rHDPE. The strain at break showed a decreasing trend as the rPET content increased. The addition of E-GMA to the rHDPE/rPET blends was found to recover the blend toughness as well as improving the compatibility between HDPE and PET. In this study, the highest strain at break was obtained for the rHDPE/rPET blends at 75/25 (wt/wt) composition with E-GMA content of 5 php. FTIR and SEM analysis of the compatibilized blends confirmed the chemical interaction and improved interfacial bonding between the two phases.展开更多
Stable homogeneous suspensions of multi-walled carbon nanotubes (MWCNTs) were prepared using gum arabic (GA) as dispersant and were incorporated to Portland cement paste. The dispersion was examined by ultraviolet vis...Stable homogeneous suspensions of multi-walled carbon nanotubes (MWCNTs) were prepared using gum arabic (GA) as dispersant and were incorporated to Portland cement paste. The dispersion was examined by ultraviolet visible spectroscopy (UV-vis), and the concentration measurement shows that the optimum concentration of GA is 0.45 g L-1. The dispersibility of the surface-modified MWCNTs in aqueous solution and cement matrix were investigated by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), and the mechanical properties of the composites were investigated. The results show that the addition of the treated nanotubes can improve both the flexural strength and the compressive strength of the Portland cement composite significantly. The flexural strength of the composite increases up to 43.38% with the MWCNT concentration of 0.08% (by weight of cement). The porosity and pore size distribution of the composites were measured by mercury intrusion porosimetry (MIP), and the results indicate that the cement paste doped with MWCNTs obtained lower porosity and concentrated pore size distribution. The morphological structure was analyzed by field emission scanning electron microscopy (FESEM) and EDS. It is shown that MWCNTs act as bridges and networks across cracks and voids, which transfer the load in case of tension, and the interface bond strength between the nanotubes and matrix is very strong.展开更多
Stewing of rice grains by steam after boiling in excess water can be used for cooking rice perfectly. The effects of this procedure in cooking of three varieties of Iranian rice (Sang Tarom, Domsiyah and Fajr) on text...Stewing of rice grains by steam after boiling in excess water can be used for cooking rice perfectly. The effects of this procedure in cooking of three varieties of Iranian rice (Sang Tarom, Domsiyah and Fajr) on textural and morphological properties of cooked rice grains were investigated. The results showed that this step in rice cooking reduced the hardness and increased the adhesiveness of rice grains significantly. By the use of the scanning electron microscopy, it was shown that the outer surface of cooked rice stewed by steam had less porosity and closer pores due to the modification during cooking, and better gelatinization and more expansion of starch granules compared to non-stewed samples. The use of this procedure in rice cooking to provide a fully cooked and gelatinized, softer and stickier final product is recommended.展开更多
A mixture of NaOH and Na2SO3 was used in modification of banana stem fibers (BSF). Unidirectional BSF reinforced natural rubber (NR) lamina composites were made using compression moulding method. The results of the te...A mixture of NaOH and Na2SO3 was used in modification of banana stem fibers (BSF). Unidirectional BSF reinforced natural rubber (NR) lamina composites were made using compression moulding method. The results of the tensile loading in 0°, 45° and 90° to the fiber directions of the composite with fiber mass fraction of 30% were studied. Surface modification of the BSF with a mixture of 4% NaOH and 2% Na2SO3 increased the tensile strength and elastic modulus of the composite to 4.03 MPa and 147.34 MPa respectively from 3.12 MPa and 84.30 MPa of the untreated. Variation in properties due to fiber orintations was observed indicating a higher value of properties in the 0° fiber orientation than in 45° and 90° directions. The result of scanning electron microscope (SEM) micrographs of the surfaces of the fibers indicted an improvement in bonding of the fiber bundles prior to lamination with natural rubber as a result of surface treatment which resulted in its higher tensile strength.展开更多
This study aimed to examine the differences in the morphological properties and proliferation of ol-factory ensheathing cells in three-dimensional culture on collagen-heparan sulfate biological scaf-folds and in two-d...This study aimed to examine the differences in the morphological properties and proliferation of ol-factory ensheathing cells in three-dimensional culture on collagen-heparan sulfate biological scaf-folds and in two-dimensional culture on common flat culture plates.The proliferation rate of olfactory ensheathing cells in three-dimensional culture was higher than that in two-dimensional culture,as detected by an MTT assay.In addition,more than half of the olfactory ensheathing cells subcultured using the trypsinization method in three-dimensional culture displayed a spindly Schwann cell-like morphology with extremely long processes,while they showed a flat astrocyte-like morphology in two-dimensional culture.Moreover,spindle-shaped olfactory ensheathing cells tended to adopt an elongated bipolar morphology under both culture conditions.Experimental findings indicate that the morphological properties and proliferation of olfactory ensheathing cells in three-dimensional culture on collagen-heparan sulfate biological scaffolds are better than those in two-dimensional culture.展开更多
This work studies the mechanical and morphological properties of polypropylene (PP)/polyoxymethylene (POM) blends. The PP/POM blends were prepared by melting-blend with an internal mixer. The contents of PP were used ...This work studies the mechanical and morphological properties of polypropylene (PP)/polyoxymethylene (POM) blends. The PP/POM blends were prepared by melting-blend with an internal mixer. The contents of PP were used at 10%, 20%, 30%, 70%, 80% and 90% by weight. The phase morphology of the blends was observed by scanning electron microscope (SEM) due to the mechanical properties depended on the phase morphology. The results show the decrease of the impact strength, Young’s modulus and tensile strength of POM/PP blends with increasing of PP content up to 30 wt% and then increase again with a high PP content. The percent strain at break of the blends increases after adding PP in a range of 70 - 90 wt%. SEM study reveals that the POM/PP blends clearly demonstrate a two-phase matrix-particle microstructure. The results also show that the domain size of dispersed PP or POM phase increases with increasing PP or POM content. The POM domain size is smaller than the PP domain size which leads to a little change of mechanical results of PP.展开更多
The objective of this research was to assess the effect of skidding machinery on soil physical and micromorphological properties. The different positions (control or non-traffic areas, left wheel track, right wheel tr...The objective of this research was to assess the effect of skidding machinery on soil physical and micromorphological properties. The different positions (control or non-traffic areas, left wheel track, right wheel track and log track) and two soil depths (0 - 10 and 10 - 20 cm) in three repetitions were investigated. The results showed that average soil dry bulk density in four positions and two soil depths were significantly different. Comparison of average total porosity percentage and soil saturated hydraulic conductivity revealed that there were significant differences in four positions and two soil depths. Soil thin section studies using Image Tool software showed that in compacted samples there was an increase in the number of vughs voids and channels voids were in low occurrence. Micromorphological studies showed that soil compaction caused void size to decrease. In compacted samples voids bigger than 10 μm were very rare and dominant voids size was 2 μm. In compacted samples soil structure were damaged and aggregates were compressed. Also soil matrix was compressed and microstructure was massive. Results from this study confirmed that skidding machinery had a significant effect on soil physical and morphological properties. These changes causes soil and environmental degradation due to reduction in water infiltration increasing soil erosion risk.展开更多
This study presented a technique to deposit high strength and highly conductive copper thin films on glass substrates at room temperature. In this work, Cu thin films with thicknesses ~500 nm have been deposited on gl...This study presented a technique to deposit high strength and highly conductive copper thin films on glass substrates at room temperature. In this work, Cu thin films with thicknesses ~500 nm have been deposited on glass substrate by thermal evaporation technique at room temperature. After deposition, these films have been annealed at 200°C for 10 - 40 minutes. The thickness and annealing effect on the structural and morphological properties were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM) respectively. The results showed that by increasing thickness the copper films crystallinity in (111) direction had been increased. Also by varying the annealing time the significant changes were observed in the films crystallinity and surface morphology.展开更多
Date palm fiber(DPF)and kenaf fiber were reinforced in epoxy having various fiber loading 40%,50%,and 60%by weight.These hybrid samples were manufactured by hot press technique and then characterized for tensile,impac...Date palm fiber(DPF)and kenaf fiber were reinforced in epoxy having various fiber loading 40%,50%,and 60%by weight.These hybrid samples were manufactured by hot press technique and then characterized for tensile,impact,and morphological behavior to evaluate the ratio of fibers in the hybrid composites;the addition of kenaf improved the tensile properties,Scanning Electron Microscopy(SEM)revealed the interfacial bonding of fiber/matrix,and dispersion and void content in composites.Impact test studies reflected the effect of natural fiber with epoxy,level of stress transfer from matrix to reinforced material,and reinforced material’s role in absorbing the impacts.It showed that 50%of DPF had the best shock-absorbing capacity.The obtained results indicated that 30%DPF in hybrid composite showed improved tensile properties and homogeneous distribution of fiber without void content;however,50%DPF loading in hybrid composites had the best impact properties.展开更多
A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA)block copolymer has great potential for use as a flexible bioplastic.Highly flexible bioplastics are required for flexible packaging applicatio...A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA)block copolymer has great potential for use as a flexible bioplastic.Highly flexible bioplastics are required for flexible packaging applications.In this work,a PEG was incorporated into block copolymer as a plasticizer by solvent casting.PLLA-PEG-PLLA/PEG blends with different blend ratios were prepared,and the plasticizing effect and miscibility of PEG in block copolymer were intensively investigated compared to PLLA/PEG blends.The results indicated that the PEG was an effective plasticizer for the block copolymer.The blending of PEG decreased glass-transition temperature and accelerated the crystallization of both the PLLA and PLLA-PEG-PLLA matrices.The PEG was completely miscible when blended with block copolymer and it improved thermal stability of the block copolymer matrix but not of the PLLA matrix.Film extensibility of PLLA-PEG-PLLA/PEG blends steadily increased as the PEG ratio increased.These non-toxic and highly flexible PLLA-PEG-PLLA/PEG bioplastics are promising candidates for several applications such as biomedical devices,tissue scaffolds and packaging materials.展开更多
The purpose of this research is to investigate the hydration behavior and cementitious properties of the mixture of calcium carbonate and aluminate, and to explore whether it can be adopted as a new low-carbon cementi...The purpose of this research is to investigate the hydration behavior and cementitious properties of the mixture of calcium carbonate and aluminate, and to explore whether it can be adopted as a new low-carbon cementitious material. The composite system of calcium carbonate and aluminate minerals is studied by measuring the component of hydration products, the hydration heat, setting time and compressive strength.The results prove that the composite system has certain cementitious properties and is feasible to prepare new low-carbon cement.展开更多
Glacier inventories serve as critical baseline data for understanding the impacts of climate change on glaciers.The present study maps the outlines of glaciers in the Chandra-Bhaga Basin(western Himalaya)for the years...Glacier inventories serve as critical baseline data for understanding the impacts of climate change on glaciers.The present study maps the outlines of glaciers in the Chandra-Bhaga Basin(western Himalaya)for the years 1993,2000,2010,and 2019 using Landsat Thematic Mapper(TM),Enhanced Thematic Mapper(ETM),and Operational Land Imager(OLI)datasets.A total of 251 glaciers,each having an area above 0.5 km^(2),were identified,which include 216 clean-ice and 35 debris-covered glaciers.Area changes are estimated for three periods:1993-2000,2000-2010,and 2010-2019.The total glacierized area was 996±62 km^(2) in 1993,which decreased to 973±70 km^(2) in 2019.The mean rate of glacier area loss was higher in the recent decade(2010-2019),at 0.036 km^(2),compared to previous decades(0.029 km^(2) in 2000-2010 and 0.025 km^(2) in 1993-2000).Supraglacial debris cover changes are also mapped over the period of 1993 and 2019.It is found that the supraglacial debris cover increased by 14.12±2.54 km^(2)(15.2%)during 1993-2019.Extensive field surveys on Chhota Shigri,Panchi II,Patsio,Hamtah,Mulkila,and Yoche Lungpa glaciers were carried out to validate the glacier outlines and supraglacial debris cover estimated using satellite datasets.Controls of various morphological parameters on retreat were also analyzed.It is observed that small,clean ice,south oriented glaciers,and glaciers with proglacial lakes are losing area at faster rates than other glaciers in the basin.展开更多
Magnesium(Mg)-based bone implants degrade rapidly in the physiological environment of the human body which affects their structural integrity and biocompatibility before adequate bone repair.Rare earth elements(REEs)h...Magnesium(Mg)-based bone implants degrade rapidly in the physiological environment of the human body which affects their structural integrity and biocompatibility before adequate bone repair.Rare earth elements(REEs)have demonstrated their effectiveness in tailoring the corrosion and mechanical behavior of Mg alloys.This study methodically investigated the impacts of scandium(Sc)and terbium(Tb)in tailoring the corrosion resistance,mechanical properties,and biocompatibility of Mg–0.5Zn–0.35Zr–0.15Mn(MZZM)alloys fabricated via casting and hot extrusion.Results indicate that addition of Sc and Tb improved the strength of MZZM alloys via grain size reduction and solid solution strengthening mechanisms.The extruded MZZM–(1–2)Sc–(1–2)Tb(wt.%)alloys exhibit compressive strengths within the range of 336–405 MPa,surpassing the minimum required strength of 200 MPa for bone implants by a significant margin.Potentiodynamic polarization tests revealed low corrosion rates of as–cast MZZM(0.25 mm/y),MZZM–2Tb(0.45 mm/y),MZZM–1Sc–1Tb(0.18 mm/y),and MZZM–1Sc–2Tb(0.64 mm/y),and extruded MZZM(0.17 mm/y),MZZM–1Sc(0.15 mm/y),MZZM-2Sc(0.45 mm/y),MZZM-1Tb(0.17 mm/y),MZZM-2Tb(0.10 mm/y),MZZM–1Sc-1Tb(0.14 mm/y),MZZM-1Sc-2Tb(0.40 mm/y),and MZZM–2Sc–2Tb(0.51 mm/y)alloys,which were found lower compared to corrosion rate of high-purity Mg(~1.0 mm/y)reported in the literature.Furthermore,addition of Sc,or Tb,or Sc and Tb to MZZM alloys did not adversely affect the viability of SaOS2 cells,but enhanced their initial cell attachment,proliferation,and spreading shown via polygonal shapes and filipodia.This study emphasizes the benefits of incorporating Sc and Tb elements in MZZM alloys,as they effectively enhance corrosion resistance,mechanical properties,and biocompatibility simultaneously.展开更多
AIM:To quantitatively measure ocular morphological parameters of guinea pig with Python technology.METHODS:Thirty-six eyeballs of eighteen 3-weekold guinea pigs were measured with keratometer and photographed to obtai...AIM:To quantitatively measure ocular morphological parameters of guinea pig with Python technology.METHODS:Thirty-six eyeballs of eighteen 3-weekold guinea pigs were measured with keratometer and photographed to obtain the horizontal,coronal,and sagittal planes respectively.The corresponding photo pixels-actual length ratio was acquired by a proportional scale.The edge coordinates were identified artificially by ginput function.Circle and conic curve fitting were applied to fit the contour of the eyeball in the sagittal,coronal and horizontal view.The curvature,curvature radius,eccentricity,tilt angle,corneal diameter,and binocular separation angle were calculated according to the geometric principles.Next,the eyeballs were removed,canny edge detection was applied to identify the contour of eyeball in vitro.The results were compared between in vivo and in vitro.RESULTS:Regarding the corneal curvature and curvature radius on the horizontal and sagittal planes,no significant differences were observed among results in vivo,in vitro,and the keratometer.The horizontal and vertical binocular separation angles were 130.6°±6.39°and 129.8°±9.58°respectively.For the corneal curvature radius and eccentricity in vivo,significant differences were observed between horizontal and vertical planes.CONCLUSION:The Graphical interface window of Python makes up the deficiency of edge detection,which requires too much definition in Matlab.There are significant differences between guinea pig and human beings,such as exotropic eye position,oblique oval eyeball,and obvious discrepancy of binoculus.This study helps evaluate objectively the ocular morphological parameters of small experimental animals in emmetropization research.展开更多
The double flower developmental process is regulated via a complex transcriptional regulatory network.To understand this highly dynamic and complex developmental process of Dianthus spp.,we performed a comparative ana...The double flower developmental process is regulated via a complex transcriptional regulatory network.To understand this highly dynamic and complex developmental process of Dianthus spp.,we performed a comparative analysis of floral morphology and transcriptome dynamics in simple flowers and double flowers.We found that the primordium of double flowers of‘X’was larger in size compared to that of simple flowers of‘L’in Dianthus chinensis.RNA-seq and Weighted Gene Co-expression Network Analysis(WGCNA)during flower development,identified stage-specific gene network modules.Expression analysis by RNA-seq indicated that a group of genes related to floral meristem identity,primordia position and polarity were highly expressed in double flowers genotypes compared to simple flowers genotypes,suggesting their roles in double-petal formation.A total of 21 DEGs related to petal number were identified between simple and double flowers.The experiments of in situ hybridization revealed that DcaAP2L,DcaLFY and DcaUFO genes were expressed in the intra-sepal boundary and petal boundary.We proposed a potential transcriptional regulatory network for simple and double flower development.This study provides novel insights into the molecular mechanism underlying double flower formation in Dianthus spp.展开更多
This study aims to investigate the abundance of AMF according to soil properties and altitudes in different cacao plantations of Cameroon. Physico-chemical analyses were made on soil samples collected from three agro-...This study aims to investigate the abundance of AMF according to soil properties and altitudes in different cacao plantations of Cameroon. Physico-chemical analyses were made on soil samples collected from three agro-ecological zones. Soil samples were also used to evaluate directly the AMF abundance following the various altitudes and after trapping by sorghum plant. The results showed that soil properties, AMF spore abundances and colonization fluctuated significantly at different altitudes. The most represented texture was sandy loam. The bimodal zone presented a homogeneous texture (sandy loam) in all its localities. Cacao soil chemical characteristics showed that, the highest nitrogen rate (0.47%;p 0.05, Scott-Knott test) was recorded at Melong in a monomodal zone while Tonga in the Western highlands displayed the lowest rate (0.13%). Soil P concentration was significantly high in monomodal zones (Mbanga and Melong). Soil pH level indicated that the soil from Tonga in the Western highlands was neutral (pH = 6.67), and soils of other localities under study were acidic with the lowest (4.75) pH level recorded at Melong in a monomodal zone. In soil samples, the highest spore density (1.03 spores/g soil) was observed at Ntui in Bimodal zone, while the lowest spore density (0.26 spores/g soil) was observed at Bafang in the Western highlands. Root colonization showed that the sample from Bokito in a bimodal zone displayed the best frequency of mycorrhization (86.11%) while the sample from Bafang in the Western highlands recorded the lowest (27.11%). The PCA analysis highlighted that available phosphorus, pH and altitude all strongly correlated with AMF root colonization ability and can be used as a predictor of AMF colonization ability in cacao rhizosphere.展开更多
For the sake of improving the mechanical properties and corrosion resistance of biodegradable Mg alloy synergistically,various content of element V(0,0.05,0.10,0.15,0.20 wt.%)are introduced into an Mg-Zn-Y alloy with ...For the sake of improving the mechanical properties and corrosion resistance of biodegradable Mg alloy synergistically,various content of element V(0,0.05,0.10,0.15,0.20 wt.%)are introduced into an Mg-Zn-Y alloy with long-period stacking ordered(LPSO)structure,and the effects of V on its microstructure,mechanical properties and corrosion resistance are investigated systematically.The results indicate that the grains are effectively refined by V addition,and the primaryα-Mg in Mg-Zn-Y-V0.1 alloy is most significantly refined,with grain size being decreased by 62%.The amount of 18R LPSO structure is increased owing to the V addition.The growth mode of the second phase(W-phase and 18R LPSO structure)is transformed to divorced growth pattern,which ascribes to the thermodynamic drive force of V to promote the nucleation of LPSO phase.Thus,18R LPSO structure presents a continuous distribution.Due to grains refinement and modification of second phase,the tensile strength and strain of alloys are both enhanced effectively.Especially,the ultimate tensile strength and the elongation of V0.1 alloy are 254 MPa and 15.26%,which are 41%and 61%higher than those of V-free alloy,respectively.Owing to the continuously distributed 18R LPSO structure with refined grains and stable product film,the weight loss and hydrogen evolution corrosion rates of V0.1 alloy are 7.1 and 6.2 mmy^(-1),respectively,which are 42.6%and 45.4%lower than those of V-free alloy.展开更多
Lake is an important part of the natural ecosystem, and its morphological characteristics reflect the capacity of lake regulation and storage, the strength of material migration, and the characteristics of shoreline d...Lake is an important part of the natural ecosystem, and its morphological characteristics reflect the capacity of lake regulation and storage, the strength of material migration, and the characteristics of shoreline development. In most existing studies, remote sensing images are used to quantify the morphological characteristics of lakes. However, the extraction accuracy of lake water is greatly affected by cloud cover and vegetation cover, and the inversion accuracy of lake elevation data is poor, which cannot accurately describe the response relationship of lake landscape morphology with water level change. Therefore, this paper takes Tonle Sap Lake as the research object, which is the largest natural freshwater lake in Southeast Asia. DEM is constructed based on high-resolution measured topographic data, and morphological indicators such as lake area, lake shoreline length, perimeter area ratio, longest axis length, maximum width, shoreline development index, lake shape complexity, compactness ratio and form ratio are adopted to researching the evolution law of high water overflows and low water outbursts quantitatively, and clarifying the variation characteristics of landscape morphology with water level gradient in Tonle Sap Lake. The research results have important theoretical significance for the scientific utilization of Tonle Sap Lake water resources and the protection of the lake ecosystem.展开更多
文摘Polymer blends based on recycled high density polyethylene (rHDPE) and recycled poly(ethylene terephthalate) (rPET) with and without ethylene-glycidyl methacrylate copolymer (E-GMA) as compatibilizer were fabricated in a co-rotating twin screw extruder. The effects of rPET and compatibilizer content on the mechanical properties and morphological stability of rHDPE-rich blends were investigated. The rHDPE/rPET (75/25 wt/wt) blend compatibilized with 5 php (per 100 part of polymer) E-GMA showed an enhancement of about 7% - 26% in tensile properties and flexural strength as compared with those of the neat rHDPE. The strain at break showed a decreasing trend as the rPET content increased. The addition of E-GMA to the rHDPE/rPET blends was found to recover the blend toughness as well as improving the compatibility between HDPE and PET. In this study, the highest strain at break was obtained for the rHDPE/rPET blends at 75/25 (wt/wt) composition with E-GMA content of 5 php. FTIR and SEM analysis of the compatibilized blends confirmed the chemical interaction and improved interfacial bonding between the two phases.
基金Funded by the National Natural Science Foundation of China(Nos.51278086,51178085)the Program for New Century Excellent Talentsin University(NCET)+1 种基金the State Key Laboratory of Coastal and Offshore Engineering(No.LP1109)the Fundamental Research Funds for the Central Universities(No.DUT11NY11)
文摘Stable homogeneous suspensions of multi-walled carbon nanotubes (MWCNTs) were prepared using gum arabic (GA) as dispersant and were incorporated to Portland cement paste. The dispersion was examined by ultraviolet visible spectroscopy (UV-vis), and the concentration measurement shows that the optimum concentration of GA is 0.45 g L-1. The dispersibility of the surface-modified MWCNTs in aqueous solution and cement matrix were investigated by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), and the mechanical properties of the composites were investigated. The results show that the addition of the treated nanotubes can improve both the flexural strength and the compressive strength of the Portland cement composite significantly. The flexural strength of the composite increases up to 43.38% with the MWCNT concentration of 0.08% (by weight of cement). The porosity and pore size distribution of the composites were measured by mercury intrusion porosimetry (MIP), and the results indicate that the cement paste doped with MWCNTs obtained lower porosity and concentrated pore size distribution. The morphological structure was analyzed by field emission scanning electron microscopy (FESEM) and EDS. It is shown that MWCNTs act as bridges and networks across cracks and voids, which transfer the load in case of tension, and the interface bond strength between the nanotubes and matrix is very strong.
文摘Stewing of rice grains by steam after boiling in excess water can be used for cooking rice perfectly. The effects of this procedure in cooking of three varieties of Iranian rice (Sang Tarom, Domsiyah and Fajr) on textural and morphological properties of cooked rice grains were investigated. The results showed that this step in rice cooking reduced the hardness and increased the adhesiveness of rice grains significantly. By the use of the scanning electron microscopy, it was shown that the outer surface of cooked rice stewed by steam had less porosity and closer pores due to the modification during cooking, and better gelatinization and more expansion of starch granules compared to non-stewed samples. The use of this procedure in rice cooking to provide a fully cooked and gelatinized, softer and stickier final product is recommended.
文摘A mixture of NaOH and Na2SO3 was used in modification of banana stem fibers (BSF). Unidirectional BSF reinforced natural rubber (NR) lamina composites were made using compression moulding method. The results of the tensile loading in 0°, 45° and 90° to the fiber directions of the composite with fiber mass fraction of 30% were studied. Surface modification of the BSF with a mixture of 4% NaOH and 2% Na2SO3 increased the tensile strength and elastic modulus of the composite to 4.03 MPa and 147.34 MPa respectively from 3.12 MPa and 84.30 MPa of the untreated. Variation in properties due to fiber orintations was observed indicating a higher value of properties in the 0° fiber orientation than in 45° and 90° directions. The result of scanning electron microscope (SEM) micrographs of the surfaces of the fibers indicted an improvement in bonding of the fiber bundles prior to lamination with natural rubber as a result of surface treatment which resulted in its higher tensile strength.
基金sponsored by the National Natural Science Foundation of China,No. 30570628,30770751 and 81171089
文摘This study aimed to examine the differences in the morphological properties and proliferation of ol-factory ensheathing cells in three-dimensional culture on collagen-heparan sulfate biological scaf-folds and in two-dimensional culture on common flat culture plates.The proliferation rate of olfactory ensheathing cells in three-dimensional culture was higher than that in two-dimensional culture,as detected by an MTT assay.In addition,more than half of the olfactory ensheathing cells subcultured using the trypsinization method in three-dimensional culture displayed a spindly Schwann cell-like morphology with extremely long processes,while they showed a flat astrocyte-like morphology in two-dimensional culture.Moreover,spindle-shaped olfactory ensheathing cells tended to adopt an elongated bipolar morphology under both culture conditions.Experimental findings indicate that the morphological properties and proliferation of olfactory ensheathing cells in three-dimensional culture on collagen-heparan sulfate biological scaffolds are better than those in two-dimensional culture.
文摘This work studies the mechanical and morphological properties of polypropylene (PP)/polyoxymethylene (POM) blends. The PP/POM blends were prepared by melting-blend with an internal mixer. The contents of PP were used at 10%, 20%, 30%, 70%, 80% and 90% by weight. The phase morphology of the blends was observed by scanning electron microscope (SEM) due to the mechanical properties depended on the phase morphology. The results show the decrease of the impact strength, Young’s modulus and tensile strength of POM/PP blends with increasing of PP content up to 30 wt% and then increase again with a high PP content. The percent strain at break of the blends increases after adding PP in a range of 70 - 90 wt%. SEM study reveals that the POM/PP blends clearly demonstrate a two-phase matrix-particle microstructure. The results also show that the domain size of dispersed PP or POM phase increases with increasing PP or POM content. The POM domain size is smaller than the PP domain size which leads to a little change of mechanical results of PP.
文摘The objective of this research was to assess the effect of skidding machinery on soil physical and micromorphological properties. The different positions (control or non-traffic areas, left wheel track, right wheel track and log track) and two soil depths (0 - 10 and 10 - 20 cm) in three repetitions were investigated. The results showed that average soil dry bulk density in four positions and two soil depths were significantly different. Comparison of average total porosity percentage and soil saturated hydraulic conductivity revealed that there were significant differences in four positions and two soil depths. Soil thin section studies using Image Tool software showed that in compacted samples there was an increase in the number of vughs voids and channels voids were in low occurrence. Micromorphological studies showed that soil compaction caused void size to decrease. In compacted samples voids bigger than 10 μm were very rare and dominant voids size was 2 μm. In compacted samples soil structure were damaged and aggregates were compressed. Also soil matrix was compressed and microstructure was massive. Results from this study confirmed that skidding machinery had a significant effect on soil physical and morphological properties. These changes causes soil and environmental degradation due to reduction in water infiltration increasing soil erosion risk.
文摘This study presented a technique to deposit high strength and highly conductive copper thin films on glass substrates at room temperature. In this work, Cu thin films with thicknesses ~500 nm have been deposited on glass substrate by thermal evaporation technique at room temperature. After deposition, these films have been annealed at 200°C for 10 - 40 minutes. The thickness and annealing effect on the structural and morphological properties were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM) respectively. The results showed that by increasing thickness the copper films crystallinity in (111) direction had been increased. Also by varying the annealing time the significant changes were observed in the films crystallinity and surface morphology.
文摘Date palm fiber(DPF)and kenaf fiber were reinforced in epoxy having various fiber loading 40%,50%,and 60%by weight.These hybrid samples were manufactured by hot press technique and then characterized for tensile,impact,and morphological behavior to evaluate the ratio of fibers in the hybrid composites;the addition of kenaf improved the tensile properties,Scanning Electron Microscopy(SEM)revealed the interfacial bonding of fiber/matrix,and dispersion and void content in composites.Impact test studies reflected the effect of natural fiber with epoxy,level of stress transfer from matrix to reinforced material,and reinforced material’s role in absorbing the impacts.It showed that 50%of DPF had the best shock-absorbing capacity.The obtained results indicated that 30%DPF in hybrid composite showed improved tensile properties and homogeneous distribution of fiber without void content;however,50%DPF loading in hybrid composites had the best impact properties.
基金financially supported by Mahasarakham University。
文摘A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA)block copolymer has great potential for use as a flexible bioplastic.Highly flexible bioplastics are required for flexible packaging applications.In this work,a PEG was incorporated into block copolymer as a plasticizer by solvent casting.PLLA-PEG-PLLA/PEG blends with different blend ratios were prepared,and the plasticizing effect and miscibility of PEG in block copolymer were intensively investigated compared to PLLA/PEG blends.The results indicated that the PEG was an effective plasticizer for the block copolymer.The blending of PEG decreased glass-transition temperature and accelerated the crystallization of both the PLLA and PLLA-PEG-PLLA matrices.The PEG was completely miscible when blended with block copolymer and it improved thermal stability of the block copolymer matrix but not of the PLLA matrix.Film extensibility of PLLA-PEG-PLLA/PEG blends steadily increased as the PEG ratio increased.These non-toxic and highly flexible PLLA-PEG-PLLA/PEG bioplastics are promising candidates for several applications such as biomedical devices,tissue scaffolds and packaging materials.
基金Funded by the National Natural Science Foundation of China (Nos.51772033, 52002040)the National Key Research and Development Program of China (No. 2023YFB3711400)。
文摘The purpose of this research is to investigate the hydration behavior and cementitious properties of the mixture of calcium carbonate and aluminate, and to explore whether it can be adopted as a new low-carbon cementitious material. The composite system of calcium carbonate and aluminate minerals is studied by measuring the component of hydration products, the hydration heat, setting time and compressive strength.The results prove that the composite system has certain cementitious properties and is feasible to prepare new low-carbon cement.
基金We also extend our gratitude to the Glaciology Group,Jawaharlal Nehru University for providing necessary support for this research.MFA acknowledges the grants from SERB(CRG/2020/004877)and MOES/16/19/2017-RDEAS projects.SV and MFA express appreciation for the support from ISRO/RES/4/690/21-22 project.
文摘Glacier inventories serve as critical baseline data for understanding the impacts of climate change on glaciers.The present study maps the outlines of glaciers in the Chandra-Bhaga Basin(western Himalaya)for the years 1993,2000,2010,and 2019 using Landsat Thematic Mapper(TM),Enhanced Thematic Mapper(ETM),and Operational Land Imager(OLI)datasets.A total of 251 glaciers,each having an area above 0.5 km^(2),were identified,which include 216 clean-ice and 35 debris-covered glaciers.Area changes are estimated for three periods:1993-2000,2000-2010,and 2010-2019.The total glacierized area was 996±62 km^(2) in 1993,which decreased to 973±70 km^(2) in 2019.The mean rate of glacier area loss was higher in the recent decade(2010-2019),at 0.036 km^(2),compared to previous decades(0.029 km^(2) in 2000-2010 and 0.025 km^(2) in 1993-2000).Supraglacial debris cover changes are also mapped over the period of 1993 and 2019.It is found that the supraglacial debris cover increased by 14.12±2.54 km^(2)(15.2%)during 1993-2019.Extensive field surveys on Chhota Shigri,Panchi II,Patsio,Hamtah,Mulkila,and Yoche Lungpa glaciers were carried out to validate the glacier outlines and supraglacial debris cover estimated using satellite datasets.Controls of various morphological parameters on retreat were also analyzed.It is observed that small,clean ice,south oriented glaciers,and glaciers with proglacial lakes are losing area at faster rates than other glaciers in the basin.
基金the financial support provided by the Australian Research Council(ARC)through the Future Fellowship(FT160100252)the Discovery Project(DP170102557)for this research。
文摘Magnesium(Mg)-based bone implants degrade rapidly in the physiological environment of the human body which affects their structural integrity and biocompatibility before adequate bone repair.Rare earth elements(REEs)have demonstrated their effectiveness in tailoring the corrosion and mechanical behavior of Mg alloys.This study methodically investigated the impacts of scandium(Sc)and terbium(Tb)in tailoring the corrosion resistance,mechanical properties,and biocompatibility of Mg–0.5Zn–0.35Zr–0.15Mn(MZZM)alloys fabricated via casting and hot extrusion.Results indicate that addition of Sc and Tb improved the strength of MZZM alloys via grain size reduction and solid solution strengthening mechanisms.The extruded MZZM–(1–2)Sc–(1–2)Tb(wt.%)alloys exhibit compressive strengths within the range of 336–405 MPa,surpassing the minimum required strength of 200 MPa for bone implants by a significant margin.Potentiodynamic polarization tests revealed low corrosion rates of as–cast MZZM(0.25 mm/y),MZZM–2Tb(0.45 mm/y),MZZM–1Sc–1Tb(0.18 mm/y),and MZZM–1Sc–2Tb(0.64 mm/y),and extruded MZZM(0.17 mm/y),MZZM–1Sc(0.15 mm/y),MZZM-2Sc(0.45 mm/y),MZZM-1Tb(0.17 mm/y),MZZM-2Tb(0.10 mm/y),MZZM–1Sc-1Tb(0.14 mm/y),MZZM-1Sc-2Tb(0.40 mm/y),and MZZM–2Sc–2Tb(0.51 mm/y)alloys,which were found lower compared to corrosion rate of high-purity Mg(~1.0 mm/y)reported in the literature.Furthermore,addition of Sc,or Tb,or Sc and Tb to MZZM alloys did not adversely affect the viability of SaOS2 cells,but enhanced their initial cell attachment,proliferation,and spreading shown via polygonal shapes and filipodia.This study emphasizes the benefits of incorporating Sc and Tb elements in MZZM alloys,as they effectively enhance corrosion resistance,mechanical properties,and biocompatibility simultaneously.
基金Supported by the National Natural Science Foundation of China(No.81400428)Self-selected Projects of Shanghai Children’s Hospital(No.2020R124)Shanghai Children’s Hospital Hospital-level Project Clinical Research Cultivation Special Focus Project(No.2021YLYZ03).
文摘AIM:To quantitatively measure ocular morphological parameters of guinea pig with Python technology.METHODS:Thirty-six eyeballs of eighteen 3-weekold guinea pigs were measured with keratometer and photographed to obtain the horizontal,coronal,and sagittal planes respectively.The corresponding photo pixels-actual length ratio was acquired by a proportional scale.The edge coordinates were identified artificially by ginput function.Circle and conic curve fitting were applied to fit the contour of the eyeball in the sagittal,coronal and horizontal view.The curvature,curvature radius,eccentricity,tilt angle,corneal diameter,and binocular separation angle were calculated according to the geometric principles.Next,the eyeballs were removed,canny edge detection was applied to identify the contour of eyeball in vitro.The results were compared between in vivo and in vitro.RESULTS:Regarding the corneal curvature and curvature radius on the horizontal and sagittal planes,no significant differences were observed among results in vivo,in vitro,and the keratometer.The horizontal and vertical binocular separation angles were 130.6°±6.39°and 129.8°±9.58°respectively.For the corneal curvature radius and eccentricity in vivo,significant differences were observed between horizontal and vertical planes.CONCLUSION:The Graphical interface window of Python makes up the deficiency of edge detection,which requires too much definition in Matlab.There are significant differences between guinea pig and human beings,such as exotropic eye position,oblique oval eyeball,and obvious discrepancy of binoculus.This study helps evaluate objectively the ocular morphological parameters of small experimental animals in emmetropization research.
基金supported by funding from National Natural Science Foundation of China(Grant Nos.32002074 and 31872135)China Postdoctoral Science Foundation(Grant No.2021M693445)。
文摘The double flower developmental process is regulated via a complex transcriptional regulatory network.To understand this highly dynamic and complex developmental process of Dianthus spp.,we performed a comparative analysis of floral morphology and transcriptome dynamics in simple flowers and double flowers.We found that the primordium of double flowers of‘X’was larger in size compared to that of simple flowers of‘L’in Dianthus chinensis.RNA-seq and Weighted Gene Co-expression Network Analysis(WGCNA)during flower development,identified stage-specific gene network modules.Expression analysis by RNA-seq indicated that a group of genes related to floral meristem identity,primordia position and polarity were highly expressed in double flowers genotypes compared to simple flowers genotypes,suggesting their roles in double-petal formation.A total of 21 DEGs related to petal number were identified between simple and double flowers.The experiments of in situ hybridization revealed that DcaAP2L,DcaLFY and DcaUFO genes were expressed in the intra-sepal boundary and petal boundary.We proposed a potential transcriptional regulatory network for simple and double flower development.This study provides novel insights into the molecular mechanism underlying double flower formation in Dianthus spp.
文摘This study aims to investigate the abundance of AMF according to soil properties and altitudes in different cacao plantations of Cameroon. Physico-chemical analyses were made on soil samples collected from three agro-ecological zones. Soil samples were also used to evaluate directly the AMF abundance following the various altitudes and after trapping by sorghum plant. The results showed that soil properties, AMF spore abundances and colonization fluctuated significantly at different altitudes. The most represented texture was sandy loam. The bimodal zone presented a homogeneous texture (sandy loam) in all its localities. Cacao soil chemical characteristics showed that, the highest nitrogen rate (0.47%;p 0.05, Scott-Knott test) was recorded at Melong in a monomodal zone while Tonga in the Western highlands displayed the lowest rate (0.13%). Soil P concentration was significantly high in monomodal zones (Mbanga and Melong). Soil pH level indicated that the soil from Tonga in the Western highlands was neutral (pH = 6.67), and soils of other localities under study were acidic with the lowest (4.75) pH level recorded at Melong in a monomodal zone. In soil samples, the highest spore density (1.03 spores/g soil) was observed at Ntui in Bimodal zone, while the lowest spore density (0.26 spores/g soil) was observed at Bafang in the Western highlands. Root colonization showed that the sample from Bokito in a bimodal zone displayed the best frequency of mycorrhization (86.11%) while the sample from Bafang in the Western highlands recorded the lowest (27.11%). The PCA analysis highlighted that available phosphorus, pH and altitude all strongly correlated with AMF root colonization ability and can be used as a predictor of AMF colonization ability in cacao rhizosphere.
基金supported financially by the National Natural Science Foundation of China(Nos.51825401,51474153 and 51574175)。
文摘For the sake of improving the mechanical properties and corrosion resistance of biodegradable Mg alloy synergistically,various content of element V(0,0.05,0.10,0.15,0.20 wt.%)are introduced into an Mg-Zn-Y alloy with long-period stacking ordered(LPSO)structure,and the effects of V on its microstructure,mechanical properties and corrosion resistance are investigated systematically.The results indicate that the grains are effectively refined by V addition,and the primaryα-Mg in Mg-Zn-Y-V0.1 alloy is most significantly refined,with grain size being decreased by 62%.The amount of 18R LPSO structure is increased owing to the V addition.The growth mode of the second phase(W-phase and 18R LPSO structure)is transformed to divorced growth pattern,which ascribes to the thermodynamic drive force of V to promote the nucleation of LPSO phase.Thus,18R LPSO structure presents a continuous distribution.Due to grains refinement and modification of second phase,the tensile strength and strain of alloys are both enhanced effectively.Especially,the ultimate tensile strength and the elongation of V0.1 alloy are 254 MPa and 15.26%,which are 41%and 61%higher than those of V-free alloy,respectively.Owing to the continuously distributed 18R LPSO structure with refined grains and stable product film,the weight loss and hydrogen evolution corrosion rates of V0.1 alloy are 7.1 and 6.2 mmy^(-1),respectively,which are 42.6%and 45.4%lower than those of V-free alloy.
文摘Lake is an important part of the natural ecosystem, and its morphological characteristics reflect the capacity of lake regulation and storage, the strength of material migration, and the characteristics of shoreline development. In most existing studies, remote sensing images are used to quantify the morphological characteristics of lakes. However, the extraction accuracy of lake water is greatly affected by cloud cover and vegetation cover, and the inversion accuracy of lake elevation data is poor, which cannot accurately describe the response relationship of lake landscape morphology with water level change. Therefore, this paper takes Tonle Sap Lake as the research object, which is the largest natural freshwater lake in Southeast Asia. DEM is constructed based on high-resolution measured topographic data, and morphological indicators such as lake area, lake shoreline length, perimeter area ratio, longest axis length, maximum width, shoreline development index, lake shape complexity, compactness ratio and form ratio are adopted to researching the evolution law of high water overflows and low water outbursts quantitatively, and clarifying the variation characteristics of landscape morphology with water level gradient in Tonle Sap Lake. The research results have important theoretical significance for the scientific utilization of Tonle Sap Lake water resources and the protection of the lake ecosystem.
