In seismology and earthquake engineering,it is fundamental to identify and characterize the pulse-like features in pulse-type ground motions.To capture the pulses that dominate structural responses,this study establis...In seismology and earthquake engineering,it is fundamental to identify and characterize the pulse-like features in pulse-type ground motions.To capture the pulses that dominate structural responses,this study establishes congruence and shift relationships between response spectrum surfaces.A similarity search between spectrum surfaces,supplemented with a similarity search in time series,has been applied to characterize the pulse-like features in pulse-type ground motions.The identified pulses are tested in predicting the rocking consequences of slender rectangular blocks under the original ground motions.Generally,the prediction is promising for the majority of the ground motions where the dominant pulse is correctly identified.展开更多
This paper presented a novel tinny motion capture system for measuring bird posture based on inertial and magnetic measurement units that are made up of micromachined gyroscopes, accelerometers, and magnetometers. Mul...This paper presented a novel tinny motion capture system for measuring bird posture based on inertial and magnetic measurement units that are made up of micromachined gyroscopes, accelerometers, and magnetometers. Multiple quaternion-based extended Kalman filters were implemented to estimate the absolute orientations to achieve high accuracy.Under the guidance of ornithology experts, the extending/contracting motions and flapping cycles were recorded using the developed motion capture system, and the orientation of each bone was also analyzed. The captured flapping gesture of the Falco peregrinus is crucial to the motion database of raptors as well as the bionic design.展开更多
In this study,we estimate the absolute vertical land motions at three tidal stations with collocated Global Navigation Satellite System(GNSS)receivers over French Polynesia during the period 2007-2020,and obtain,as an...In this study,we estimate the absolute vertical land motions at three tidal stations with collocated Global Navigation Satellite System(GNSS)receivers over French Polynesia during the period 2007-2020,and obtain,as ancillary results,estimates of the absolute changes in sea level at the same locations.To verify our processing approach to determining vertical motion,we first modeled vertical motion at the International GNSS Service(IGS)THTI station located in the capital island of Tahiti and compared our estimate with previous independent determinations,with a good agreement.We obtained the following estimates for the vertical land motions at the tide gauges:Tubuai island,Austral Archipelago-0.92±0.17 mm/yr,Vairao village,Tahiti Iti:-0.49±0.39 mm/yr,Rikitea,Gambier Archipelago-0.43±0.17 mm/yr.The absolute variations of the sea level are:Tubuai island,Austral Archipelago 5.25±0.60 mm/yr,Vairao village,Tahiti Iti:3.62±0.52 mm/yr,Rikitea,Gambier Archipelago 1.52±0.23 mm/yr.We discuss these absolute values in light of the values obtained from altimetric measurements and other means in French Polynesia.展开更多
The rotary motion deblurring is an inevitable procedure when the imaging seeker is mounted in the rotating missiles.Traditional rotary motion deblurring methods suffer from ringing artifacts and noise,especially for l...The rotary motion deblurring is an inevitable procedure when the imaging seeker is mounted in the rotating missiles.Traditional rotary motion deblurring methods suffer from ringing artifacts and noise,especially for large blur extents.To solve the above problems,we propose a progressive rotary motion deblurring framework consisting of a coarse deblurring stage and a refinement stage.In the first stage,we design an adaptive blur extents factor(BE factor)to balance noise suppression and details reconstruction.And a novel deconvolution model is proposed based on BE factor.In the second stage,a triplescale deformable module CNN(TDM-CNN)is designed to reduce the ringing artifacts,which can exploit the 2D information of an image and adaptively adjust spatial sampling locations.To establish a standard evaluation benchmark,a real-world rotary motion blur dataset is proposed and released,which includes rotary blurred images and corresponding ground truth images with different blur angles.Experimental results demonstrate that the proposed method outperforms the state-of-the-art models on synthetic and real-world rotary motion blur datasets.The code and dataset are available at https://github.com/JinhuiQin/RotaryDeblurring.展开更多
This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is establi...This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is established considering the flexible deformation of the barrel and the interaction between the projectile and the barrel.Subsequently,the accuracy of the dynamic model is verified based on the external ballistic projectile attitude test platform.Furthermore,the probability density evolution method(PDEM)is developed to high-dimensional uncertainty quantification of projectile motion.The engineering example highlights the results of the proposed method are consistent with the results obtained by the Monte Carlo Simulation(MCS).Finally,the influence of parameter uncertainty on the projectile disturbance at muzzle under different working conditions is analyzed.The results show that the disturbance of the pitch angular,pitch angular velocity and pitch angular of velocity decreases with the increase of launching angle,and the random parameter ranges of both the projectile and coupling model have similar influence on the disturbance of projectile angular motion at muzzle.展开更多
Lower limb motion recognition techniques commonly employ Surface Electromyographic Signal(sEMG)as input and apply a machine learning classifier or Back Propagation Neural Network(BPNN)for classification.However,this a...Lower limb motion recognition techniques commonly employ Surface Electromyographic Signal(sEMG)as input and apply a machine learning classifier or Back Propagation Neural Network(BPNN)for classification.However,this artificial feature engineering technique is not generalizable to similar tasks and is heavily reliant on the researcher’s subject expertise.In contrast,neural networks such as Convolutional Neural Network(CNN)and Long Short-term Memory Neural Network(LSTM)can automatically extract features,providing a more generalized and adaptable approach to lower limb motion recognition.Although this approach overcomes the limitations of human feature engineering,it may ignore the potential correlation among the sEMG channels.This paper proposes a spatial–temporal graph neural network model,STGNN-LMR,designed to address the problem of recognizing lower limb motion from multi-channel sEMG.STGNN-LMR transforms multi-channel sEMG into a graph structure and uses graph learning to model spatial–temporal features.An 8-channel sEMG dataset is constructed for the experimental stage,and the results show that the STGNN-LMR model achieves a recognition accuracy of 99.71%.Moreover,this paper simulates two unexpected scenarios,including sEMG sensors affected by sweat noise and sudden failure,and evaluates the testing results using hypothesis testing.According to the experimental results,the STGNN-LMR model exhibits a significant advantage over the control models in noise scenarios and failure scenarios.These experimental results confirm the effectiveness of the STGNN-LMR model for addressing the challenges associated with sEMG-based lower limb motion recognition in practical scenarios.展开更多
The influence of Brownian motion and thermophoresis on a fluid containing nanoparticles flowing over a stretchable cylinder is examined.The classical Navier-Stokes equations are considered in a porous frame.In additio...The influence of Brownian motion and thermophoresis on a fluid containing nanoparticles flowing over a stretchable cylinder is examined.The classical Navier-Stokes equations are considered in a porous frame.In addition,the Lorentz force is taken into account.The controlling coupled nonlinear partial differential equations are transformed into a system of first order ordinary differential equations by means of a similarity transformation.The resulting system of equations is solved by employing a shooting approach properly implemented in MATLAB.The evolution of the boundary layer and the growing velocity is shown graphically together with the related profiles of concentration and temperature.The magnetic field has a different influence(in terms of trends)on velocity and concentration.展开更多
Medical imaging plays a key role within modern hospital management systems for diagnostic purposes.Compression methodologies are extensively employed to mitigate storage demands and enhance transmission speed,all whil...Medical imaging plays a key role within modern hospital management systems for diagnostic purposes.Compression methodologies are extensively employed to mitigate storage demands and enhance transmission speed,all while upholding image quality.Moreover,an increasing number of hospitals are embracing cloud computing for patient data storage,necessitating meticulous scrutiny of server security and privacy protocols.Nevertheless,considering the widespread availability of multimedia tools,the preservation of digital data integrity surpasses the significance of compression alone.In response to this concern,we propose a secure storage and transmission solution for compressed medical image sequences,such as ultrasound images,utilizing a motion vector watermarking scheme.The watermark is generated employing an error-correcting code known as Bose-Chaudhuri-Hocquenghem(BCH)and is subsequently embedded into the compressed sequence via block-based motion vectors.In the process of watermark embedding,motion vectors are selected based on their magnitude and phase angle.When embedding watermarks,no specific spatial area,such as a region of interest(ROI),is used in the images.The embedding of watermark bits is dependent on motion vectors.Although reversible watermarking allows the restoration of the original image sequences,we use the irreversible watermarking method.The reason for this is that the use of reversible watermarks may impede the claims of ownership and legal rights.The restoration of original data or images may call into question ownership or other legal claims.The peak signal-to-noise ratio(PSNR)and structural similarity index(SSIM)serve as metrics for evaluating the watermarked image quality.Across all images,the PSNR value exceeds 46 dB,and the SSIM value exceeds 0.92.Experimental results substantiate the efficacy of the proposed technique in preserving data integrity.展开更多
Aiming at the environment such as ravines and obstacles that may be encountered in the actual movement,this paper proposes a method for optimizing the bounding and jumping motion based on the ground touching force tra...Aiming at the environment such as ravines and obstacles that may be encountered in the actual movement,this paper proposes a method for optimizing the bounding and jumping motion based on the ground touching force trajectory and the air motion trajectory of the quadruped robot.The method of optimizing the ground reaction force according to the speed of the demand and the height of the jump,and adjusting the stance and swing time according to the relationship of dynamics and momentum conservation.At the same time,under the constraints of dynamics and energy consumption of the robot system,considering the jumping distance and height,a method for optimizing the air trajectory of bounding and jumping is proposed.State switching and landing stability control are also added.Finally,the experimental results show that the quadruped robot has strong bounding and jumping ability,and has achieved stable bounding movement and forward jump movement of 0.8 m.展开更多
Uniform linear array(ULA)radars are widely used in the collision-avoidance radar systems of small unmanned aerial vehicles(UAVs).In practice,a ULA's multi-target direction of arrival(DOA)estimation performance suf...Uniform linear array(ULA)radars are widely used in the collision-avoidance radar systems of small unmanned aerial vehicles(UAVs).In practice,a ULA's multi-target direction of arrival(DOA)estimation performance suffers from significant performance degradation owing to the limited number of physical elements.To improve the underdetermined DOA estimation performance of a ULA radar mounted on a small UAV platform,we propose a nonuniform linear motion sampling underdetermined DOA estimation method.Using the motion of the UAV platform,the echo signal is sampled at different positions.Then,according to the concept of difference co-array,a virtual ULA with multiple array elements and a large aperture is synthesized to increase the degrees of freedom(DOFs).Through position analysis of the original and motion arrays,we propose a nonuniform linear motion sampling method based on ULA for determining the optimal DOFs.Under the condition of no increase in the aperture of the physical array,the proposed method obtains a high DOF with fewer sampling runs and greatly improves the underdetermined DOA estimation performance of ULA.The results of numerical simulations conducted herein verify the superior performance of the proposed method.展开更多
This paper considers the compound Poisson risk model perturbed by Brownian motion with variable premium and dependence between claims amounts and inter-claim times via Spearman copula. It is assumed that the insurance...This paper considers the compound Poisson risk model perturbed by Brownian motion with variable premium and dependence between claims amounts and inter-claim times via Spearman copula. It is assumed that the insurance company’s portfolio is governed by two classes of policyholders. On the one hand, the first class where the amount of claims is high, and on the other hand, the second class where the amount of claims is low, this difference in claim amounts has significant implications for the insurance company’s pricing and risk management strategies. When policyholders are in the first class, they pay an insurance premium of a constant amount c<sub>1</sub> and when they are in the second class, the premium paid is a constant amount c<sub>2</sub> such that c<sub>1 </sub>> c<sub>2</sub>. The nature of claims (low or high) is measured via random thresholds . The study in this work will focus on the determination of the integro-differential equations satisfied by Gerber-Shiu functions and their Laplace transforms in the risk model perturbed by Brownian motion with variable premium and dependence between claims amounts and inter-claim times via Spearman copula. .展开更多
In contrast to the solutions of applied mathematics to Zeno’s paradoxes, I focus on the concept of motion and show that, by distinguishing two different forms of motion, Zeno’s apparent paradoxes are not paradoxical...In contrast to the solutions of applied mathematics to Zeno’s paradoxes, I focus on the concept of motion and show that, by distinguishing two different forms of motion, Zeno’s apparent paradoxes are not paradoxical at all. Zeno’s paradoxes indirectly prove that distances are not composed of extensionless points and, in general, that a higher dimension cannot be completely composed of lower ones. Conversely, lower dimensions can be understood as special cases of higher dimensions. To illustrate this approach, I consider Cantor’s only apparent proof that the real numbers are uncountable. However, his widely accepted indirect proof has the disadvantage that it depends on whether there is another way to make the real numbers countable. Cantor rightly assumes that there can be no smallest number between 0 and 1, and therefore no beginning of counting. For this reason he arbitrarily lists the real numbers in order to show with his diagonal method that this list can never be complete. The situation is different if we start with the largest number between 0 and 1 (0.999…) and use the method of an inverted triangle, which can be understood as a special fractal form. Here we can construct a vertical and a horizontal stratification with which it is actually possible to construct all real numbers between 0 and 1 without exception. Each column is infinite, and each number in that column is the starting point of a new triangle, while each row is finite. Even in a simple sine curve, we experience finiteness with respect to the y-axis and infinity with respect to the x-axis. The first parts of this article show that Zeno’s assumptions contradict the concept of motion as such, so it is not surprising that this misconstruction leads to contradictions. In the last part, I discuss Cantor’s diagonal method and explain the method of an inverted triangle that is internally structured like a fractal by repeating this inverted triangle at each column. The consequence is that we encounter two very different methods of counting. Vertically it is continuous, horizontally it is discrete. While Frege, Tarski, Cantor, Gödel and the Vienna Circle tried to derive the higher dimension from the lower, a procedure that always leads to new contradictions and antinomies (Tarski, Russell), I take the opposite approach here, in which I derive the lower dimension from the higher. This perspective seems to fail because Tarski, Russell, Wittgenstein, and especially the Vienna Circle have shown that the completeness of the absolute itself is logically contradictory. For this reason, we agree with Hegel in assuming that we can never fully comprehend the Absolute, but only its particular manifestations—otherwise we would be putting ourselves in the place of the Absolute, or even God. Nevertheless, we can understand the Absolute in its particular expressions, as I will show with the modest example of the triangle proof of the combined horizontal and vertical countability of the real numbers, which I developed in rejection of Cantor’s diagonal proof. .展开更多
The human motion generation model can extract structural features from existing human motion capture data,and the generated data makes animated characters move.The 3D human motion capture sequences contain complex spa...The human motion generation model can extract structural features from existing human motion capture data,and the generated data makes animated characters move.The 3D human motion capture sequences contain complex spatial-temporal structures,and the deep learning model can fully describe the potential semantic structure of human motion.To improve the authenticity of the generated human motion sequences,we propose a multi-task motion generation model that consists of a discriminator and a generator.The discriminator classifies motion sequences into different styles according to their similarity to the mean spatial-temporal templates from motion sequences of 17 crucial human joints in three-freedom degrees.And target motion sequences are created with these styles by the generator.Unlike traditional related works,our model can handle multiple tasks,such as identifying styles and generating data.In addition,by extracting 17 crucial joints from 29 human joints,our model avoids data redundancy and improves the accuracy of model recognition.The experimental results show that the discriminator of the model can effectively recognize diversified movements,and the generated data can correctly fit the actual data.The combination of discriminator and generator solves the problem of low reuse rate of motion data,and the generated motion sequences are more suitable for actual movement.展开更多
This paper proposes a unified trajectory optimization approach that simultaneously optimizes the trajectory of the center of mass and footholds for legged locomotion.Based on a generic point-mass model,the approach is...This paper proposes a unified trajectory optimization approach that simultaneously optimizes the trajectory of the center of mass and footholds for legged locomotion.Based on a generic point-mass model,the approach is formulated as a nonlinear optimization problem,incorporating constraints such as robot kinematics,dynamics,ground reaction forces,obstacles,and target location.The unified optimization approach can be applied to both long-term motion planning and the reactive online planning through the use of model predictive control,and it incorporates vector field guidance to converge to the long-term planned motion.The effectiveness of the approach is demonstrated through simulations and physical experiments,showing its ability to generate a variety of walking and jumping gaits,as well as transitions between them,and to perform reactive walking in obstructed environments.展开更多
Compared with the traditional wind turbine of a single rotor,dual-rotor wind turbines(DRWTs)have higher wind energy capture efficiency and a more complex structure.Therefore,the aerodynamic performance of the DRWT ins...Compared with the traditional wind turbine of a single rotor,dual-rotor wind turbines(DRWTs)have higher wind energy capture efficiency and a more complex structure.Therefore,the aerodynamic performance of the DRWT installed on the floating platform will be greatly affected by the motion caused by wind and wave loads.In this paper,5 MW and 750 kW single rotor wind turbines(SRWTs)are combined into a 5 MW-5 MW DRWT and a 5 MW-750 kW DRWT,and their power output and wake field characteristics in different motions are studied.The flow field is obtained by solving the Reynolds-averaged Navier–Stokes equation(RANS).The overset grid technique is employed to achieve the large-amplitude multiple-degree-of-freedom motion of the DRWT.The overall performance of the 5 MW single rotor wind turbine is determined by a numerical method.For the DRWTs,numerical results show that the surge motion and heave motion both have a negative effect on the power output of the DRWT.The surge motion is a critical factor that causes the power output of the DRWT to periodically change with motion.The average power output of the DRWT influenced by motion is lower than that of a DRWT with a fixed bottom.The surge motion significantly disturbs the wake of the DRWT due to the mutual interference between the upstream and downstream rotors.Under the influence of heave motion,low-velocity regions downstream of the blade tip are enhanced.This study indicates that attenuating the surge and heave motion of offshore DRWT is very significant for improving its efficiency and should be taken into consideration during the design procedure.展开更多
Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human vi...Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human visual inspection is known to be labor intensive,time-consuming,and prone to error.In this study,a computer vision-based fatigue crack detection approach using a short video recorded under live loads by a moving consumer-grade camera is presented.The method detects fatigue crack by tracking surface motion and identifies the differential motion pattern caused by opening and closing of the fatigue crack.However,the global motion introduced by a moving camera in the recorded video is typically far greater than the actual motion associated with fatigue crack opening/closing,leading to false detection results.To overcome the challenge,global motion compensation(GMC)techniques are introduced to compensate for camera-induced movement.In particular,hierarchical model-based motion estimation is adopted for 2D videos with simple geometry and a new method is developed by extending the bundled camera paths approach for 3D videos with complex geometry.The proposed methodology is validated using two laboratory test setups for both in-plane and out-of-plane fatigue cracks.The results confirm the importance of motion compensation for both 2D and 3D videos and demonstrate the effectiveness of the proposed GMC methods as well as the subsequent crack detection algorithm.展开更多
Autonomous marine vehicles(AMVs)have received considerable attention in the past few decades,mainly because they play essential roles in broad marine applications such as environmental monitoring and resource explorat...Autonomous marine vehicles(AMVs)have received considerable attention in the past few decades,mainly because they play essential roles in broad marine applications such as environmental monitoring and resource exploration.Recent advances in the field of communication technologies,perception capability,computational power and advanced optimization algorithms have stimulated new interest in the development of AMVs.In order to deploy the constrained AMVs in the complex dynamic maritime environment,it is crucial to enhance the guidance and control capabilities through effective and practical planning,and control algorithms.Model predictive control(MPC)has been exceptionally successful in different fields due to its ability to systematically handle constraints while optimizing control performance.This paper aims to provide a review of recent progress in the context of motion planning and control for AMVs from the perceptive of MPC.Finally,future research trends and directions in this substantial research area of AMVs are highlighted.展开更多
Legged locomotion poses significant challenges due to its nonlinear,underactuated and hybrid dynamic properties.These challenges are exacerbated by the high-speed motion and presence of aerial phases in dynamic legged...Legged locomotion poses significant challenges due to its nonlinear,underactuated and hybrid dynamic properties.These challenges are exacerbated by the high-speed motion and presence of aerial phases in dynamic legged locomotion,which highlights the requirement for online planning based on current states to cope with uncertainty and disturbances.This article proposes a real-time planning and control framework integrating motion planning and whole-body control.In the framework,the designed motion planner allows a wider body rotation range and fast reactive behaviors based on the 3-D single rigid body model.In addition,the combination of a Bézier curve based trajectory interpolator and a heuristic-based foothold planner helps generate continuous and smooth foot trajectories.The developed whole-body controller uses hierarchical quadratic optimization coupled with the full system dynamics,which ensures tasks are prioritized based on importance and joint commands are physically feasible.The performance of the framework is successfully validated in experiments with a torque-controlled quadrupedal robot for generating dynamic motions.展开更多
基金National Key Research and Development Program,Ministry of Science and Technology of China under Grant No.2022YFC3803004the National Natural Science Foundation of China under Grant No.51838004。
文摘In seismology and earthquake engineering,it is fundamental to identify and characterize the pulse-like features in pulse-type ground motions.To capture the pulses that dominate structural responses,this study establishes congruence and shift relationships between response spectrum surfaces.A similarity search between spectrum surfaces,supplemented with a similarity search in time series,has been applied to characterize the pulse-like features in pulse-type ground motions.The identified pulses are tested in predicting the rocking consequences of slender rectangular blocks under the original ground motions.Generally,the prediction is promising for the majority of the ground motions where the dominant pulse is correctly identified.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.52175279 and 51705459)the Natural Science Foundation of Zhejiang Province,China (Grant No.LY20E050022)the Key Research and Development Projects of Zhejiang Provincial Science and Technology Department (Grant No.2021C03122)。
文摘This paper presented a novel tinny motion capture system for measuring bird posture based on inertial and magnetic measurement units that are made up of micromachined gyroscopes, accelerometers, and magnetometers. Multiple quaternion-based extended Kalman filters were implemented to estimate the absolute orientations to achieve high accuracy.Under the guidance of ornithology experts, the extending/contracting motions and flapping cycles were recorded using the developed motion capture system, and the orientation of each bone was also analyzed. The captured flapping gesture of the Falco peregrinus is crucial to the motion database of raptors as well as the bionic design.
基金the University of French Polynesiafunding by several successive“Decision Aide a la Recherche”(DAR)grants to the Geodesy Observatory of Tahiti from the French Space Agency(CNES)+2 种基金fundings from the local government of French Polynesia(Observatoire Polynesien du Rechauffement Climatique)funding by“National Natural Science Foundation of China”(Grand No.41931075)funding by“the Fundamental Research Funds for the Central Universities"(Grand No.2042022kf1198)。
文摘In this study,we estimate the absolute vertical land motions at three tidal stations with collocated Global Navigation Satellite System(GNSS)receivers over French Polynesia during the period 2007-2020,and obtain,as ancillary results,estimates of the absolute changes in sea level at the same locations.To verify our processing approach to determining vertical motion,we first modeled vertical motion at the International GNSS Service(IGS)THTI station located in the capital island of Tahiti and compared our estimate with previous independent determinations,with a good agreement.We obtained the following estimates for the vertical land motions at the tide gauges:Tubuai island,Austral Archipelago-0.92±0.17 mm/yr,Vairao village,Tahiti Iti:-0.49±0.39 mm/yr,Rikitea,Gambier Archipelago-0.43±0.17 mm/yr.The absolute variations of the sea level are:Tubuai island,Austral Archipelago 5.25±0.60 mm/yr,Vairao village,Tahiti Iti:3.62±0.52 mm/yr,Rikitea,Gambier Archipelago 1.52±0.23 mm/yr.We discuss these absolute values in light of the values obtained from altimetric measurements and other means in French Polynesia.
基金the National Natural Science Foundation of China under Grant 62075169,Grant 62003247,and Grant 62061160370the Hubei Province Key Research and Development Program under Grant 2021BBA235the Zhuhai Basic and Applied Basic Research Foundation under Grant ZH22017003200010PWC.
文摘The rotary motion deblurring is an inevitable procedure when the imaging seeker is mounted in the rotating missiles.Traditional rotary motion deblurring methods suffer from ringing artifacts and noise,especially for large blur extents.To solve the above problems,we propose a progressive rotary motion deblurring framework consisting of a coarse deblurring stage and a refinement stage.In the first stage,we design an adaptive blur extents factor(BE factor)to balance noise suppression and details reconstruction.And a novel deconvolution model is proposed based on BE factor.In the second stage,a triplescale deformable module CNN(TDM-CNN)is designed to reduce the ringing artifacts,which can exploit the 2D information of an image and adaptively adjust spatial sampling locations.To establish a standard evaluation benchmark,a real-world rotary motion blur dataset is proposed and released,which includes rotary blurred images and corresponding ground truth images with different blur angles.Experimental results demonstrate that the proposed method outperforms the state-of-the-art models on synthetic and real-world rotary motion blur datasets.The code and dataset are available at https://github.com/JinhuiQin/RotaryDeblurring.
基金the National Natural Science Foundation of China(Grant No.11472137).
文摘This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is established considering the flexible deformation of the barrel and the interaction between the projectile and the barrel.Subsequently,the accuracy of the dynamic model is verified based on the external ballistic projectile attitude test platform.Furthermore,the probability density evolution method(PDEM)is developed to high-dimensional uncertainty quantification of projectile motion.The engineering example highlights the results of the proposed method are consistent with the results obtained by the Monte Carlo Simulation(MCS).Finally,the influence of parameter uncertainty on the projectile disturbance at muzzle under different working conditions is analyzed.The results show that the disturbance of the pitch angular,pitch angular velocity and pitch angular of velocity decreases with the increase of launching angle,and the random parameter ranges of both the projectile and coupling model have similar influence on the disturbance of projectile angular motion at muzzle.
文摘Lower limb motion recognition techniques commonly employ Surface Electromyographic Signal(sEMG)as input and apply a machine learning classifier or Back Propagation Neural Network(BPNN)for classification.However,this artificial feature engineering technique is not generalizable to similar tasks and is heavily reliant on the researcher’s subject expertise.In contrast,neural networks such as Convolutional Neural Network(CNN)and Long Short-term Memory Neural Network(LSTM)can automatically extract features,providing a more generalized and adaptable approach to lower limb motion recognition.Although this approach overcomes the limitations of human feature engineering,it may ignore the potential correlation among the sEMG channels.This paper proposes a spatial–temporal graph neural network model,STGNN-LMR,designed to address the problem of recognizing lower limb motion from multi-channel sEMG.STGNN-LMR transforms multi-channel sEMG into a graph structure and uses graph learning to model spatial–temporal features.An 8-channel sEMG dataset is constructed for the experimental stage,and the results show that the STGNN-LMR model achieves a recognition accuracy of 99.71%.Moreover,this paper simulates two unexpected scenarios,including sEMG sensors affected by sweat noise and sudden failure,and evaluates the testing results using hypothesis testing.According to the experimental results,the STGNN-LMR model exhibits a significant advantage over the control models in noise scenarios and failure scenarios.These experimental results confirm the effectiveness of the STGNN-LMR model for addressing the challenges associated with sEMG-based lower limb motion recognition in practical scenarios.
文摘The influence of Brownian motion and thermophoresis on a fluid containing nanoparticles flowing over a stretchable cylinder is examined.The classical Navier-Stokes equations are considered in a porous frame.In addition,the Lorentz force is taken into account.The controlling coupled nonlinear partial differential equations are transformed into a system of first order ordinary differential equations by means of a similarity transformation.The resulting system of equations is solved by employing a shooting approach properly implemented in MATLAB.The evolution of the boundary layer and the growing velocity is shown graphically together with the related profiles of concentration and temperature.The magnetic field has a different influence(in terms of trends)on velocity and concentration.
基金supported by the Yayasan Universiti Teknologi PETRONAS Grants,YUTP-PRG(015PBC-027)YUTP-FRG(015LC0-311),Hilmi Hasan,www.utp.edu.my.
文摘Medical imaging plays a key role within modern hospital management systems for diagnostic purposes.Compression methodologies are extensively employed to mitigate storage demands and enhance transmission speed,all while upholding image quality.Moreover,an increasing number of hospitals are embracing cloud computing for patient data storage,necessitating meticulous scrutiny of server security and privacy protocols.Nevertheless,considering the widespread availability of multimedia tools,the preservation of digital data integrity surpasses the significance of compression alone.In response to this concern,we propose a secure storage and transmission solution for compressed medical image sequences,such as ultrasound images,utilizing a motion vector watermarking scheme.The watermark is generated employing an error-correcting code known as Bose-Chaudhuri-Hocquenghem(BCH)and is subsequently embedded into the compressed sequence via block-based motion vectors.In the process of watermark embedding,motion vectors are selected based on their magnitude and phase angle.When embedding watermarks,no specific spatial area,such as a region of interest(ROI),is used in the images.The embedding of watermark bits is dependent on motion vectors.Although reversible watermarking allows the restoration of the original image sequences,we use the irreversible watermarking method.The reason for this is that the use of reversible watermarks may impede the claims of ownership and legal rights.The restoration of original data or images may call into question ownership or other legal claims.The peak signal-to-noise ratio(PSNR)and structural similarity index(SSIM)serve as metrics for evaluating the watermarked image quality.Across all images,the PSNR value exceeds 46 dB,and the SSIM value exceeds 0.92.Experimental results substantiate the efficacy of the proposed technique in preserving data integrity.
基金supported by the National Key Research Program of China 2018AAA0100103.
文摘Aiming at the environment such as ravines and obstacles that may be encountered in the actual movement,this paper proposes a method for optimizing the bounding and jumping motion based on the ground touching force trajectory and the air motion trajectory of the quadruped robot.The method of optimizing the ground reaction force according to the speed of the demand and the height of the jump,and adjusting the stance and swing time according to the relationship of dynamics and momentum conservation.At the same time,under the constraints of dynamics and energy consumption of the robot system,considering the jumping distance and height,a method for optimizing the air trajectory of bounding and jumping is proposed.State switching and landing stability control are also added.Finally,the experimental results show that the quadruped robot has strong bounding and jumping ability,and has achieved stable bounding movement and forward jump movement of 0.8 m.
基金National Natural Science Foundation of China(61973037)National 173 Program Project(2019-JCJQ-ZD-324)。
文摘Uniform linear array(ULA)radars are widely used in the collision-avoidance radar systems of small unmanned aerial vehicles(UAVs).In practice,a ULA's multi-target direction of arrival(DOA)estimation performance suffers from significant performance degradation owing to the limited number of physical elements.To improve the underdetermined DOA estimation performance of a ULA radar mounted on a small UAV platform,we propose a nonuniform linear motion sampling underdetermined DOA estimation method.Using the motion of the UAV platform,the echo signal is sampled at different positions.Then,according to the concept of difference co-array,a virtual ULA with multiple array elements and a large aperture is synthesized to increase the degrees of freedom(DOFs).Through position analysis of the original and motion arrays,we propose a nonuniform linear motion sampling method based on ULA for determining the optimal DOFs.Under the condition of no increase in the aperture of the physical array,the proposed method obtains a high DOF with fewer sampling runs and greatly improves the underdetermined DOA estimation performance of ULA.The results of numerical simulations conducted herein verify the superior performance of the proposed method.
文摘This paper considers the compound Poisson risk model perturbed by Brownian motion with variable premium and dependence between claims amounts and inter-claim times via Spearman copula. It is assumed that the insurance company’s portfolio is governed by two classes of policyholders. On the one hand, the first class where the amount of claims is high, and on the other hand, the second class where the amount of claims is low, this difference in claim amounts has significant implications for the insurance company’s pricing and risk management strategies. When policyholders are in the first class, they pay an insurance premium of a constant amount c<sub>1</sub> and when they are in the second class, the premium paid is a constant amount c<sub>2</sub> such that c<sub>1 </sub>> c<sub>2</sub>. The nature of claims (low or high) is measured via random thresholds . The study in this work will focus on the determination of the integro-differential equations satisfied by Gerber-Shiu functions and their Laplace transforms in the risk model perturbed by Brownian motion with variable premium and dependence between claims amounts and inter-claim times via Spearman copula. .
文摘In contrast to the solutions of applied mathematics to Zeno’s paradoxes, I focus on the concept of motion and show that, by distinguishing two different forms of motion, Zeno’s apparent paradoxes are not paradoxical at all. Zeno’s paradoxes indirectly prove that distances are not composed of extensionless points and, in general, that a higher dimension cannot be completely composed of lower ones. Conversely, lower dimensions can be understood as special cases of higher dimensions. To illustrate this approach, I consider Cantor’s only apparent proof that the real numbers are uncountable. However, his widely accepted indirect proof has the disadvantage that it depends on whether there is another way to make the real numbers countable. Cantor rightly assumes that there can be no smallest number between 0 and 1, and therefore no beginning of counting. For this reason he arbitrarily lists the real numbers in order to show with his diagonal method that this list can never be complete. The situation is different if we start with the largest number between 0 and 1 (0.999…) and use the method of an inverted triangle, which can be understood as a special fractal form. Here we can construct a vertical and a horizontal stratification with which it is actually possible to construct all real numbers between 0 and 1 without exception. Each column is infinite, and each number in that column is the starting point of a new triangle, while each row is finite. Even in a simple sine curve, we experience finiteness with respect to the y-axis and infinity with respect to the x-axis. The first parts of this article show that Zeno’s assumptions contradict the concept of motion as such, so it is not surprising that this misconstruction leads to contradictions. In the last part, I discuss Cantor’s diagonal method and explain the method of an inverted triangle that is internally structured like a fractal by repeating this inverted triangle at each column. The consequence is that we encounter two very different methods of counting. Vertically it is continuous, horizontally it is discrete. While Frege, Tarski, Cantor, Gödel and the Vienna Circle tried to derive the higher dimension from the lower, a procedure that always leads to new contradictions and antinomies (Tarski, Russell), I take the opposite approach here, in which I derive the lower dimension from the higher. This perspective seems to fail because Tarski, Russell, Wittgenstein, and especially the Vienna Circle have shown that the completeness of the absolute itself is logically contradictory. For this reason, we agree with Hegel in assuming that we can never fully comprehend the Absolute, but only its particular manifestations—otherwise we would be putting ourselves in the place of the Absolute, or even God. Nevertheless, we can understand the Absolute in its particular expressions, as I will show with the modest example of the triangle proof of the combined horizontal and vertical countability of the real numbers, which I developed in rejection of Cantor’s diagonal proof. .
文摘The human motion generation model can extract structural features from existing human motion capture data,and the generated data makes animated characters move.The 3D human motion capture sequences contain complex spatial-temporal structures,and the deep learning model can fully describe the potential semantic structure of human motion.To improve the authenticity of the generated human motion sequences,we propose a multi-task motion generation model that consists of a discriminator and a generator.The discriminator classifies motion sequences into different styles according to their similarity to the mean spatial-temporal templates from motion sequences of 17 crucial human joints in three-freedom degrees.And target motion sequences are created with these styles by the generator.Unlike traditional related works,our model can handle multiple tasks,such as identifying styles and generating data.In addition,by extracting 17 crucial joints from 29 human joints,our model avoids data redundancy and improves the accuracy of model recognition.The experimental results show that the discriminator of the model can effectively recognize diversified movements,and the generated data can correctly fit the actual data.The combination of discriminator and generator solves the problem of low reuse rate of motion data,and the generated motion sequences are more suitable for actual movement.
基金supported by the Natural Science Foundation of Hebei Province of China(no.E2022203095)Cultivation Project for Basic Research and Innovation of Yanshan University(no.2021LGQN004)National Natural Science Foundation of China(no.51905465 and No.52122503).
文摘This paper proposes a unified trajectory optimization approach that simultaneously optimizes the trajectory of the center of mass and footholds for legged locomotion.Based on a generic point-mass model,the approach is formulated as a nonlinear optimization problem,incorporating constraints such as robot kinematics,dynamics,ground reaction forces,obstacles,and target location.The unified optimization approach can be applied to both long-term motion planning and the reactive online planning through the use of model predictive control,and it incorporates vector field guidance to converge to the long-term planned motion.The effectiveness of the approach is demonstrated through simulations and physical experiments,showing its ability to generate a variety of walking and jumping gaits,as well as transitions between them,and to perform reactive walking in obstructed environments.
基金financially supported by the Guangdong Basic and Applied Basic Research Foundation,China (Grant Nos.2021A1515011771 and 2022B1515250005)the National Natural Science Foundation of China (Grant Nos.52171289,52201350,and 52201394)+1 种基金the National Key Research and Development Program of China (Grant No.2022YFC28063)the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai) (Grant No.SML 2022016)。
文摘Compared with the traditional wind turbine of a single rotor,dual-rotor wind turbines(DRWTs)have higher wind energy capture efficiency and a more complex structure.Therefore,the aerodynamic performance of the DRWT installed on the floating platform will be greatly affected by the motion caused by wind and wave loads.In this paper,5 MW and 750 kW single rotor wind turbines(SRWTs)are combined into a 5 MW-5 MW DRWT and a 5 MW-750 kW DRWT,and their power output and wake field characteristics in different motions are studied.The flow field is obtained by solving the Reynolds-averaged Navier–Stokes equation(RANS).The overset grid technique is employed to achieve the large-amplitude multiple-degree-of-freedom motion of the DRWT.The overall performance of the 5 MW single rotor wind turbine is determined by a numerical method.For the DRWTs,numerical results show that the surge motion and heave motion both have a negative effect on the power output of the DRWT.The surge motion is a critical factor that causes the power output of the DRWT to periodically change with motion.The average power output of the DRWT influenced by motion is lower than that of a DRWT with a fixed bottom.The surge motion significantly disturbs the wake of the DRWT due to the mutual interference between the upstream and downstream rotors.Under the influence of heave motion,low-velocity regions downstream of the blade tip are enhanced.This study indicates that attenuating the surge and heave motion of offshore DRWT is very significant for improving its efficiency and should be taken into consideration during the design procedure.
基金NCHRP Project,IDEA 223:Fatigue Crack Inspection using Computer Vision and Augmented Reality。
文摘Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human visual inspection is known to be labor intensive,time-consuming,and prone to error.In this study,a computer vision-based fatigue crack detection approach using a short video recorded under live loads by a moving consumer-grade camera is presented.The method detects fatigue crack by tracking surface motion and identifies the differential motion pattern caused by opening and closing of the fatigue crack.However,the global motion introduced by a moving camera in the recorded video is typically far greater than the actual motion associated with fatigue crack opening/closing,leading to false detection results.To overcome the challenge,global motion compensation(GMC)techniques are introduced to compensate for camera-induced movement.In particular,hierarchical model-based motion estimation is adopted for 2D videos with simple geometry and a new method is developed by extending the bundled camera paths approach for 3D videos with complex geometry.The proposed methodology is validated using two laboratory test setups for both in-plane and out-of-plane fatigue cracks.The results confirm the importance of motion compensation for both 2D and 3D videos and demonstrate the effectiveness of the proposed GMC methods as well as the subsequent crack detection algorithm.
基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)。
文摘Autonomous marine vehicles(AMVs)have received considerable attention in the past few decades,mainly because they play essential roles in broad marine applications such as environmental monitoring and resource exploration.Recent advances in the field of communication technologies,perception capability,computational power and advanced optimization algorithms have stimulated new interest in the development of AMVs.In order to deploy the constrained AMVs in the complex dynamic maritime environment,it is crucial to enhance the guidance and control capabilities through effective and practical planning,and control algorithms.Model predictive control(MPC)has been exceptionally successful in different fields due to its ability to systematically handle constraints while optimizing control performance.This paper aims to provide a review of recent progress in the context of motion planning and control for AMVs from the perceptive of MPC.Finally,future research trends and directions in this substantial research area of AMVs are highlighted.
基金supported by the China Scholarship Council under Grant[2020]06120186the Engineering and Physical Sciences Research Council[Grant number EP/V026801/2]+1 种基金the Advanced Machinery and Productivity Institute[Innovate UK project number 84646]the National Natural Science Foundation of China under Grant 52175011.
文摘Legged locomotion poses significant challenges due to its nonlinear,underactuated and hybrid dynamic properties.These challenges are exacerbated by the high-speed motion and presence of aerial phases in dynamic legged locomotion,which highlights the requirement for online planning based on current states to cope with uncertainty and disturbances.This article proposes a real-time planning and control framework integrating motion planning and whole-body control.In the framework,the designed motion planner allows a wider body rotation range and fast reactive behaviors based on the 3-D single rigid body model.In addition,the combination of a Bézier curve based trajectory interpolator and a heuristic-based foothold planner helps generate continuous and smooth foot trajectories.The developed whole-body controller uses hierarchical quadratic optimization coupled with the full system dynamics,which ensures tasks are prioritized based on importance and joint commands are physically feasible.The performance of the framework is successfully validated in experiments with a torque-controlled quadrupedal robot for generating dynamic motions.
