The geological characteristics and production practices of the major middle-and high-maturity shale oil exploration areas in China are analyzed.Combined with laboratory results,it is clear that three essential conditi...The geological characteristics and production practices of the major middle-and high-maturity shale oil exploration areas in China are analyzed.Combined with laboratory results,it is clear that three essential conditions,i.e.economic initial production,commercial cumulative oil production of single well,and large-scale recoverable reserves confirmed by the testing production,determine whether the continental shale oil can be put into large-scale commercial development.The quantity and quality of movable hydrocarbons are confirmed to be crucial to economic development of shale oil,and focuses in evaluation of shale oil enrichment area/interval.The evaluation indexes of movable hydrocarbon enrichment include:(1)the material basis for forming retained hydrocarbon,including TOC>2%(preferentially 3%-4%),and typeⅠ-Ⅱkerogens;(2)the mobility of retained hydrocarbon,which is closely related to the hydrocarbon composition and flow behaviors of light/heavy components,and can be evaluated from the perspectives of thermal maturity(Ro),gas-oil ratio(GOR),crude oil density,quality of hydrocarbon components,preservation conditions;and(3)the reservoir characteristics associated with the engineering reconstruction,including the main pore throat distribution zone,reservoir physical properties(including fractures),lamellation feature and diagenetic stage,etc.Accordingly,13 evaluation indexes in three categories and their reference values are established.The evaluation indicates that the light shale oil zones in the Gulong Sag of Songliao Basin have the most favorable enrichment conditions of movable hydrocarbons,followed by light oil and black oil zones,containing 20.8×10^(8) t light oil resources in reservoirs with R_(0)>1.2%,pressure coefficient greater than 1.4,effective porosity greater than 6%,crude oil density less than 0.82 g/cm^(3),and GOR>100 m/m^(3).The shale oil in the Gulong Sag can be explored and developed separately by the categories(resource sweet spot,engineering sweet spot,and tight oil sweet spot)depending on shale oil flowability.The Gulong Sag is the most promising area to achieve large-scale breakthrough and production of continental shale oil in China.展开更多
DNA molecules are green materials with great potential for high-density and long-term data storage.However,the current data-writing process of DNA data storage via DNA synthesis suffers from high costs and the product...DNA molecules are green materials with great potential for high-density and long-term data storage.However,the current data-writing process of DNA data storage via DNA synthesis suffers from high costs and the production of hazards,limiting its practical applications.Here,we developed a DNA movable-type storage system that can utilize DNA fragments pre-produced by cell factories for data writing.In this system,these pre-generated DNA fragments,referred to herein as“DNA movable types,”are used as basic writing units in a repetitive way.The process of data writing is achieved by the rapid assembly of these DNA movable types,thereby avoiding the costly and environmentally hazardous process of de novo DNA synthesis.With this system,we successfully encoded 24 bytes of digital information in DNA and read it back accurately by means of high-throughput sequencing and decoding,thereby demonstrating the feasibility of this system.Through its repetitive usage and biological assembly of DNA movable-type fragments,this system exhibits excellent potential for writing cost reduction,opening up a novel route toward an economical and sustainable digital data-storage technology.展开更多
The Green’s function is used to solve the scattering far field solution of SH-wave by a mov-able rigid cylindrical interface inclusion in a linear elastic body.First,a suitable Green’s function is devel-oped,which i...The Green’s function is used to solve the scattering far field solution of SH-wave by a mov-able rigid cylindrical interface inclusion in a linear elastic body.First,a suitable Green’s function is devel-oped,which is the fundamental displacement solution of an elastic half space with a movable rigid half-cylin-drical inclusion impacted by out-of-plane harmonic line source loaded at any point of its horizontal surface.By using the Green’s function,a series of Fredholm integral equations of the first kind which determine thescattering far field can be set up.Then the paper gives the expressions on the far field including the displace-ment mode of scattering wave and the solution of scattering cross-section.Finally,some examples and nu-merical results are discussed to analyze the influence of the combination of different media parameters on theanswer of far field.展开更多
The current research of nuclear control rod drive mechanism(CRDM)movable latch only makes a simple measurement of wear mass.The wear volume and difference in various claw surfaces are ignored and the degradation mecha...The current research of nuclear control rod drive mechanism(CRDM)movable latch only makes a simple measurement of wear mass.The wear volume and difference in various claw surfaces are ignored and the degradation mechanism of each claw surface is not clear.In this paper,a detailed degradation analysis was carried out on each claw surface of movable latch combined with wear result and worn morphology.Results indicate that the boundary of carbide is preferred for corrosion because carbide presents a nobler Volta potential compared to the metal matrix or boundary region.Due to the oscillation of drive shaft between the claw surfaces of movable latch,the dominant wear mechanism on the upper surface of claw(USC)and lower surface of claw(LSC)is plastic deformation caused by impact wear.Mechanical impact wear will cause the fragmentation of carbides because of the high hardness and low ductility of carbides.Corrosion promotes the broken carbides to fall off from the metal matrix.The generated fine carbides(abrasive particles)cause extra abrasive wear on USC when the movable brings the drive shaft upward or downward.As a result,USC has a higher wear volume than LSC.This research proposes a method to evaluate the wear on the whole movable latches using a 3D full-size scanner.展开更多
A vertically movable gate field effect transistor(VMGFET) is proposed and demonstrated for a microaccelerometer application. The VMGFET using air gap as an insulator layer allows the gate to move on the substrate vert...A vertically movable gate field effect transistor(VMGFET) is proposed and demonstrated for a microaccelerometer application. The VMGFET using air gap as an insulator layer allows the gate to move on the substrate vertically by external forces. Finite element analysis is used to simulate mechanical behaviors of the designed structure. For the simulation, the ground acceleration spectrum of the 1952 Kern County Earthquake is employed to investigate the structural integrity of the sensor in vibration. Based on the simulation, a prototype VMGFET accelerometer is fabricated from silicon on insulator wafer. According to current–voltage characteristics of the prototype VMGFET, the threshold voltage is measured to be 2.32 V, which determines the effective charge density and the mutual transconductance of1.545910-8C cm-2and 6.59 m A V-1, respectively. The device sensitivity is 9.36–9.42 m V g-1in the low frequency,and the first natural frequency is found to be 1230 Hz. The profile smoothness of the sensed signal is in 3 d B range up to1 k Hz.展开更多
We are responsible for providing energy and food resources for our next generation.After more than 20 years of research,the author has confirmed that the VAWT with flip-up mechanism can maintain rotation without the b...We are responsible for providing energy and food resources for our next generation.After more than 20 years of research,the author has confirmed that the VAWT with flip-up mechanism can maintain rotation without the brake,even in strong winds.Experiments have shown that the triangularly coupled movable parallelogram buoyancy structure makes it easy to maintain the verticality of the wind turbine tower even under large waves.Furthermore,as a result of studying the connection between the HAWT(horizontal axis wind turbine)and the movable parallelogram buoyancy structure of the triangular connection,the feasibility was confirmed.The only way for all people in the world to secure energy and food fairly is to look for the remaining areas such as the high seas.The author would like to propose the use of the high seas to combat global hunger,which is likely to be a global problem in the future.展开更多
Two classes of composite materials are considered: classical metaleceramic composites with reinforcing hard inclusions as well as hard ceramics matrix with soft gel inclusions. Movable cellular automaton method is use...Two classes of composite materials are considered: classical metaleceramic composites with reinforcing hard inclusions as well as hard ceramics matrix with soft gel inclusions. Movable cellular automaton method is used for modeling the mechanical behaviors of such different heterogeneous materials. The method is based on particle approach and may be considered as a kind of discrete element method. The main feature of the method is the use of many-body forces of inter-element interaction within the formalism of simply deformable element approximation. It was shown that the strength of reinforcing particles and the width of particle-binder interphase boundaries had determining influence on the service characteristics of metaleceramic composite. In particular, the increasing of strength of carbide inclusions may lead to significant increase in the strength and ultimate strain of composite material. On the example of porous zirconia ceramics it was shown that the change in the mechanical properties of pore surface leads to the corresponding change in effective elastic modulus and strength limit of the ceramic sample. The less is the pore size, the more is this effect. The increase in the elastic properties of pore surface of ceramics may reduce its fracture energy.展开更多
We have investigated the electron scattering from the freely movable spin-1/2 particle in the presence of a linearly polarized laser field in the first Born approximation.The laser-dressed state of electrons is descri...We have investigated the electron scattering from the freely movable spin-1/2 particle in the presence of a linearly polarized laser field in the first Born approximation.The laser-dressed state of electrons is described by a time-dependent wave function which is derived from a perturbation treatment.With the aids of numerical simulations, we explore the dependencies of the differential cross section on the laser field intensity as well as the electron-impact energy.Due to the mobility of the target, the differential cross section of this process is smaller than that of Mott scattering.展开更多
An improved sheet hydroforming process with a movable die is proposed and investigated by elastoplastic FEM. The effects of varied process parameters on the deformation of the sheet blanks were investigated. The effec...An improved sheet hydroforming process with a movable die is proposed and investigated by elastoplastic FEM. The effects of varied process parameters on the deformation of the sheet blanks were investigated. The effects of the movable die on the FLD were also analyzed. Using a movable die may increase the forming limit of the blank and improve the forming performance. Moreover, the drawing ratio of the blank may be increased by changing the process conditions such as blank holder force and the counterforce of the movable die on the blank.展开更多
The mobile communication is nowadays one of the basic needs of humanity. It is essential to the flourishing of human beings. Considering this reality, the need to use its mobile phone is become more important and dive...The mobile communication is nowadays one of the basic needs of humanity. It is essential to the flourishing of human beings. Considering this reality, the need to use its mobile phone is become more important and diversified. The subscribers of the various mobile telephone operators are increasingly demanding. This situation poses the problems of the cover mobile network to the operators and leads them to opt for several solutions and investments. The mobile operators in order to satisfy their customers use a policy of pushing the limits of network coverage in time and space for festive moments in targeted zones. Thus, we have conducted a study on the topic: study of a kit of GSM radio site for event-driven movable coverage. This work is applied to GSM (Global system mobile) network of the operator Orange-Ci, leader of mobile telephony in Ivory Coast. We thus proceeded under investigation initially of the various aspects of the ordinary sites (motionless radio site) which are already deployed with Orange-Ci in order to impregnate us infrastructures and equipment used. This study revealed us that a radio site comprises 4 parts: infrastructures, installations and energy equipments, installations and radio equipments, and installations and equipment of transmission. After the first analysis, we made a study of the movable site. The study of the movable site enabled us to see the various possible solutions to fulfill the basic functions of a movable radio site. After analysis we retained that our radio site will be built on a truck on which a mast of 25 m maximum length for the antennas will be embarked, it will be fed by a generator also embarked on the truck and the solution of transmission selected is the transmission by satellite more precisely technology VSAT. We choose the various equipments (radio, transmission, energy) according to features which we defined to constitute the kit of movable radio site.展开更多
It is important for the fuel cell integrated movable system to operate voltage and current using safety control technology. In order to work at the convenient condition of the fuel cell system, high performance fuel c...It is important for the fuel cell integrated movable system to operate voltage and current using safety control technology. In order to work at the convenient condition of the fuel cell system, high performance fuel cell stack with replaceable fiber bipolar plate should be arranged with the integrated subsystem and appropriate working process. The parameters which affect the performance of PEMFC consisting of relative humidity, reaction temperature, gas inlet temperature, gas inlet pressure, and hydrogen and air flow rate. This study is to develop the integrated movable system on distributed power generation and backup power application, such as oxidant supply system, fuel supply system, heat management system, water management system, and power conditioning system. It comprises a novel PLC (Programmable Logic Control) system and human-machine interface. The controller is developed to control fuel cell system and record the operation data by using data acquisition system. The controller can be applied to high performance stack and system to obtain the best performance. The easy-taken high capacity hydrogen barrel embedded into steel plate of this movable system and more convenient than other fuel cell system.展开更多
This article introduces a cable-driven lower limb rehabilitation robot with movable distal anchor points(M-CDLR).The traditional cable-driven parallel robots(CDPRs)control the moving platform by changing the length of...This article introduces a cable-driven lower limb rehabilitation robot with movable distal anchor points(M-CDLR).The traditional cable-driven parallel robots(CDPRs)control the moving platform by changing the length of cables,M-CDLR can also adjust the position of the distal anchor point when the moving platform moves.The M-CDLR this article proposed has gait and single-leg training modes,which correspond to the plane and space motion of the moving platform,respectively.After introducing the system structure configuration,the generalized kinematics and dynamics of M-CDLR are established.The fully constrained CDPRs can provide more stable rehabilitation training than the under-constrained one but requires more cables.Therefore,a motion planning method for the movable distal anchor point of M-CDLR is proposed to realize the theoretically fully constrained with fewer cables.Then the expected trajectory of the moving platform is obtained from the motion capture experiment,and the motion planning of M-CDLR under two training modes is simulated.The simulation results verify the effectiveness of the proposed motion planning method.This study serves as a basic theoretical study of the structure optimization and control strategy of M-CDLR.展开更多
Hybrid-driven Underwater Glider(HUG)is a new type of underwater vehicle which integrates the functions of an Autonomous Underwater Glider(AUG)and an Autonomous Unmanned Vehicle(AUV).Although HUG has the characteristic...Hybrid-driven Underwater Glider(HUG)is a new type of underwater vehicle which integrates the functions of an Autonomous Underwater Glider(AUG)and an Autonomous Unmanned Vehicle(AUV).Although HUG has the characteristics of long endurance distance,its maneuverability still has room to be improved.This work introduces a new movement form of the neck of the underwater creature into HUG and proposes a parallel mechanism to adjust the attitude angle and displacement of the HUG’s bow,which can improve the steering maneuverability.Firstly,the influence of bow movement and rotation on the hydrodynamic force and flow field of the whole machine is analyzed by using the Computational Fluid Dynamics(CFD)method.The degree of freedom,attitude control range and movement amount of the Movable Bow Mechanism(MBM)are obtained,and then the design of MBM is completed based on these constraints.Secondly,the kinematic and dynamic models of MBM are established based on the closed vector method and the Lagrange equation,respectively,which are fully verified by comparing the results of simulation in Matlab and Adams software,then a Radial Basis Function(RBF)neural network adaptive sliding mode controller is designed to improve the dynamic response effect of the output parameters of MBM.Finally,a prototype of MBM is manufactured and assembled.The kinematic,dynamics model and controller are verified by experiments,which provides a basis for applying MBM in HUGs.展开更多
We simulate an optomechanical system via a cavity QED scenario with a movable atom and investigate its application in the tiny mass sensing.We find that the steady-state solution of the system exhibits a multiple stab...We simulate an optomechanical system via a cavity QED scenario with a movable atom and investigate its application in the tiny mass sensing.We find that the steady-state solution of the system exhibits a multiple stability behavior,which is similar to that in the optomechanical system.We explain this phenomenon by the opto-mechanical interaction term in the effective Hamiltonian.Due to the dressed states formed by the effective coupling between the vibration degree of the atom and the optical mode in the cavity,we observe a narrow transparent window in the output field.We utilize this vibration induced transparency phenomenon to perform the tiny mass sensing.We hope our study will broaden the application of the cavity QED system to quantum technologies.展开更多
The evaluation of the performance of distribution uniformity by linearly moved irrigation system(LMIS)should consider the impacts of non uniformity of the water on crop yield.With increasing pressures to improve water...The evaluation of the performance of distribution uniformity by linearly moved irrigation system(LMIS)should consider the impacts of non uniformity of the water on crop yield.With increasing pressures to improve water use efficiency,plant productivity and farm profitability,questions continue to be raised concerning the future direction of irrigated agriculture.This study therefore aimed at evaluating water distribution under LMIS newly designed by the National Research Centre of Fluid Machinery Engineering and Technology,Jiangsu University,China.This article reports the real distribution of irrigation water under the LMIS with respect to sprinkler height above the ground surface as well as the consequence of different operating pressures.Water distribution coefficients used in the performance assessment were Christiansen’s coefficient of uniformity(CU),distribution uniformity(DU),scheduling coefficients(Sc)and the coefficient of variation(CV).The results showed that the mean CU ranged from 82.30%to 93.17%,and mean DU ranged from 70.39%to 88.44%.Also Sc values ranged from 1.13 to 1.42 with CV values ranging from 10.3%to 22.5%.The optimum method and results in this study can provide a reference to the operations for saving water and cost in the application of LMIS.展开更多
The largest movable mold EMS developed by POSCO in collaboration with Daineli-Rotelec for improving internal quality of a large CC bloom is being used at a large size bloom caster of POSCO since 2011.Internal quality ...The largest movable mold EMS developed by POSCO in collaboration with Daineli-Rotelec for improving internal quality of a large CC bloom is being used at a large size bloom caster of POSCO since 2011.Internal quality of carbon steel CC bloom of 700×700 mm^2 section size with the mold EMS was much improved compared with without the mold EMS.Equiaxed zone ratio increased from 50%to 100%and the grain of equiaxed structure became globular and fine.Top shrinkage was also much reduced by applying the movable mold EMS.展开更多
基金Supported by the National Natural Science Foundation of China(U22B6004)the PetroChina Research Institute of Petroleum Exploration&Development Project(2022yjcq03).
文摘The geological characteristics and production practices of the major middle-and high-maturity shale oil exploration areas in China are analyzed.Combined with laboratory results,it is clear that three essential conditions,i.e.economic initial production,commercial cumulative oil production of single well,and large-scale recoverable reserves confirmed by the testing production,determine whether the continental shale oil can be put into large-scale commercial development.The quantity and quality of movable hydrocarbons are confirmed to be crucial to economic development of shale oil,and focuses in evaluation of shale oil enrichment area/interval.The evaluation indexes of movable hydrocarbon enrichment include:(1)the material basis for forming retained hydrocarbon,including TOC>2%(preferentially 3%-4%),and typeⅠ-Ⅱkerogens;(2)the mobility of retained hydrocarbon,which is closely related to the hydrocarbon composition and flow behaviors of light/heavy components,and can be evaluated from the perspectives of thermal maturity(Ro),gas-oil ratio(GOR),crude oil density,quality of hydrocarbon components,preservation conditions;and(3)the reservoir characteristics associated with the engineering reconstruction,including the main pore throat distribution zone,reservoir physical properties(including fractures),lamellation feature and diagenetic stage,etc.Accordingly,13 evaluation indexes in three categories and their reference values are established.The evaluation indicates that the light shale oil zones in the Gulong Sag of Songliao Basin have the most favorable enrichment conditions of movable hydrocarbons,followed by light oil and black oil zones,containing 20.8×10^(8) t light oil resources in reservoirs with R_(0)>1.2%,pressure coefficient greater than 1.4,effective porosity greater than 6%,crude oil density less than 0.82 g/cm^(3),and GOR>100 m/m^(3).The shale oil in the Gulong Sag can be explored and developed separately by the categories(resource sweet spot,engineering sweet spot,and tight oil sweet spot)depending on shale oil flowability.The Gulong Sag is the most promising area to achieve large-scale breakthrough and production of continental shale oil in China.
基金supported by the National Key Research and Development Program of China(2018YFA0900100)the Natural Science Foundation of Tianjin,China(19JCJQJC63300)Tianjin University。
文摘DNA molecules are green materials with great potential for high-density and long-term data storage.However,the current data-writing process of DNA data storage via DNA synthesis suffers from high costs and the production of hazards,limiting its practical applications.Here,we developed a DNA movable-type storage system that can utilize DNA fragments pre-produced by cell factories for data writing.In this system,these pre-generated DNA fragments,referred to herein as“DNA movable types,”are used as basic writing units in a repetitive way.The process of data writing is achieved by the rapid assembly of these DNA movable types,thereby avoiding the costly and environmentally hazardous process of de novo DNA synthesis.With this system,we successfully encoded 24 bytes of digital information in DNA and read it back accurately by means of high-throughput sequencing and decoding,thereby demonstrating the feasibility of this system.Through its repetitive usage and biological assembly of DNA movable-type fragments,this system exhibits excellent potential for writing cost reduction,opening up a novel route toward an economical and sustainable digital data-storage technology.
文摘The Green’s function is used to solve the scattering far field solution of SH-wave by a mov-able rigid cylindrical interface inclusion in a linear elastic body.First,a suitable Green’s function is devel-oped,which is the fundamental displacement solution of an elastic half space with a movable rigid half-cylin-drical inclusion impacted by out-of-plane harmonic line source loaded at any point of its horizontal surface.By using the Green’s function,a series of Fredholm integral equations of the first kind which determine thescattering far field can be set up.Then the paper gives the expressions on the far field including the displace-ment mode of scattering wave and the solution of scattering cross-section.Finally,some examples and nu-merical results are discussed to analyze the influence of the combination of different media parameters on theanswer of far field.
基金Supported by Sichuan Science and Technology Program(Grant No.2019ZDZX0001)National Natural Science Foundation of China(Grant No.U2067221)Sichuan Science and Technology Planning Project(Grant No.22JCQN0111).
文摘The current research of nuclear control rod drive mechanism(CRDM)movable latch only makes a simple measurement of wear mass.The wear volume and difference in various claw surfaces are ignored and the degradation mechanism of each claw surface is not clear.In this paper,a detailed degradation analysis was carried out on each claw surface of movable latch combined with wear result and worn morphology.Results indicate that the boundary of carbide is preferred for corrosion because carbide presents a nobler Volta potential compared to the metal matrix or boundary region.Due to the oscillation of drive shaft between the claw surfaces of movable latch,the dominant wear mechanism on the upper surface of claw(USC)and lower surface of claw(LSC)is plastic deformation caused by impact wear.Mechanical impact wear will cause the fragmentation of carbides because of the high hardness and low ductility of carbides.Corrosion promotes the broken carbides to fall off from the metal matrix.The generated fine carbides(abrasive particles)cause extra abrasive wear on USC when the movable brings the drive shaft upward or downward.As a result,USC has a higher wear volume than LSC.This research proposes a method to evaluate the wear on the whole movable latches using a 3D full-size scanner.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korea government(MSIP)(No.2012M2A8A5025825)
文摘A vertically movable gate field effect transistor(VMGFET) is proposed and demonstrated for a microaccelerometer application. The VMGFET using air gap as an insulator layer allows the gate to move on the substrate vertically by external forces. Finite element analysis is used to simulate mechanical behaviors of the designed structure. For the simulation, the ground acceleration spectrum of the 1952 Kern County Earthquake is employed to investigate the structural integrity of the sensor in vibration. Based on the simulation, a prototype VMGFET accelerometer is fabricated from silicon on insulator wafer. According to current–voltage characteristics of the prototype VMGFET, the threshold voltage is measured to be 2.32 V, which determines the effective charge density and the mutual transconductance of1.545910-8C cm-2and 6.59 m A V-1, respectively. The device sensitivity is 9.36–9.42 m V g-1in the low frequency,and the first natural frequency is found to be 1230 Hz. The profile smoothness of the sensed signal is in 3 d B range up to1 k Hz.
文摘We are responsible for providing energy and food resources for our next generation.After more than 20 years of research,the author has confirmed that the VAWT with flip-up mechanism can maintain rotation without the brake,even in strong winds.Experiments have shown that the triangularly coupled movable parallelogram buoyancy structure makes it easy to maintain the verticality of the wind turbine tower even under large waves.Furthermore,as a result of studying the connection between the HAWT(horizontal axis wind turbine)and the movable parallelogram buoyancy structure of the triangular connection,the feasibility was confirmed.The only way for all people in the world to secure energy and food fairly is to look for the remaining areas such as the high seas.The author would like to propose the use of the high seas to combat global hunger,which is likely to be a global problem in the future.
基金the Projects Nos. III.23.2.3 (I.S. Konovalenko, S.P. Buyakova) and III.23.2.4 (S.G. Psakhie) of the Basic Scientific Research Program of State Academies of Sciences for 2013e2020the RFBR Project No. 12-01-00805-a (A.Yu. Smolin, E.V. Shilko)the grant No. 14-19-00718 of the Russian Science Foundation (A.Yu. Smolin, E.V. Shilko, S.V. Astafurov)
文摘Two classes of composite materials are considered: classical metaleceramic composites with reinforcing hard inclusions as well as hard ceramics matrix with soft gel inclusions. Movable cellular automaton method is used for modeling the mechanical behaviors of such different heterogeneous materials. The method is based on particle approach and may be considered as a kind of discrete element method. The main feature of the method is the use of many-body forces of inter-element interaction within the formalism of simply deformable element approximation. It was shown that the strength of reinforcing particles and the width of particle-binder interphase boundaries had determining influence on the service characteristics of metaleceramic composite. In particular, the increasing of strength of carbide inclusions may lead to significant increase in the strength and ultimate strain of composite material. On the example of porous zirconia ceramics it was shown that the change in the mechanical properties of pore surface leads to the corresponding change in effective elastic modulus and strength limit of the ceramic sample. The less is the pore size, the more is this effect. The increase in the elastic properties of pore surface of ceramics may reduce its fracture energy.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11774131,91850114,11604119,and 11627807)
文摘We have investigated the electron scattering from the freely movable spin-1/2 particle in the presence of a linearly polarized laser field in the first Born approximation.The laser-dressed state of electrons is described by a time-dependent wave function which is derived from a perturbation treatment.With the aids of numerical simulations, we explore the dependencies of the differential cross section on the laser field intensity as well as the electron-impact energy.Due to the mobility of the target, the differential cross section of this process is smaller than that of Mott scattering.
文摘An improved sheet hydroforming process with a movable die is proposed and investigated by elastoplastic FEM. The effects of varied process parameters on the deformation of the sheet blanks were investigated. The effects of the movable die on the FLD were also analyzed. Using a movable die may increase the forming limit of the blank and improve the forming performance. Moreover, the drawing ratio of the blank may be increased by changing the process conditions such as blank holder force and the counterforce of the movable die on the blank.
文摘The mobile communication is nowadays one of the basic needs of humanity. It is essential to the flourishing of human beings. Considering this reality, the need to use its mobile phone is become more important and diversified. The subscribers of the various mobile telephone operators are increasingly demanding. This situation poses the problems of the cover mobile network to the operators and leads them to opt for several solutions and investments. The mobile operators in order to satisfy their customers use a policy of pushing the limits of network coverage in time and space for festive moments in targeted zones. Thus, we have conducted a study on the topic: study of a kit of GSM radio site for event-driven movable coverage. This work is applied to GSM (Global system mobile) network of the operator Orange-Ci, leader of mobile telephony in Ivory Coast. We thus proceeded under investigation initially of the various aspects of the ordinary sites (motionless radio site) which are already deployed with Orange-Ci in order to impregnate us infrastructures and equipment used. This study revealed us that a radio site comprises 4 parts: infrastructures, installations and energy equipments, installations and radio equipments, and installations and equipment of transmission. After the first analysis, we made a study of the movable site. The study of the movable site enabled us to see the various possible solutions to fulfill the basic functions of a movable radio site. After analysis we retained that our radio site will be built on a truck on which a mast of 25 m maximum length for the antennas will be embarked, it will be fed by a generator also embarked on the truck and the solution of transmission selected is the transmission by satellite more precisely technology VSAT. We choose the various equipments (radio, transmission, energy) according to features which we defined to constitute the kit of movable radio site.
文摘It is important for the fuel cell integrated movable system to operate voltage and current using safety control technology. In order to work at the convenient condition of the fuel cell system, high performance fuel cell stack with replaceable fiber bipolar plate should be arranged with the integrated subsystem and appropriate working process. The parameters which affect the performance of PEMFC consisting of relative humidity, reaction temperature, gas inlet temperature, gas inlet pressure, and hydrogen and air flow rate. This study is to develop the integrated movable system on distributed power generation and backup power application, such as oxidant supply system, fuel supply system, heat management system, water management system, and power conditioning system. It comprises a novel PLC (Programmable Logic Control) system and human-machine interface. The controller is developed to control fuel cell system and record the operation data by using data acquisition system. The controller can be applied to high performance stack and system to obtain the best performance. The easy-taken high capacity hydrogen barrel embedded into steel plate of this movable system and more convenient than other fuel cell system.
基金funded by the National Natural Science Foundation of China,Grant Number:52175006.
文摘This article introduces a cable-driven lower limb rehabilitation robot with movable distal anchor points(M-CDLR).The traditional cable-driven parallel robots(CDPRs)control the moving platform by changing the length of cables,M-CDLR can also adjust the position of the distal anchor point when the moving platform moves.The M-CDLR this article proposed has gait and single-leg training modes,which correspond to the plane and space motion of the moving platform,respectively.After introducing the system structure configuration,the generalized kinematics and dynamics of M-CDLR are established.The fully constrained CDPRs can provide more stable rehabilitation training than the under-constrained one but requires more cables.Therefore,a motion planning method for the movable distal anchor point of M-CDLR is proposed to realize the theoretically fully constrained with fewer cables.Then the expected trajectory of the moving platform is obtained from the motion capture experiment,and the motion planning of M-CDLR under two training modes is simulated.The simulation results verify the effectiveness of the proposed motion planning method.This study serves as a basic theoretical study of the structure optimization and control strategy of M-CDLR.
基金supported by the National Key R&D Program of China,the Laoshan Laboratory Science and Technology Innovation Project (Nos.LSKJ202200200,LSKJ202202801 and LSKJ202202802)the National Natural Science Foundation of China (No.51721003)Aoshan Talent Cultivation Program (No.2017ASTCP-OE01)of the Pilot National Laboratory for Marine Science and Technology (Qingdao).
文摘Hybrid-driven Underwater Glider(HUG)is a new type of underwater vehicle which integrates the functions of an Autonomous Underwater Glider(AUG)and an Autonomous Unmanned Vehicle(AUV).Although HUG has the characteristics of long endurance distance,its maneuverability still has room to be improved.This work introduces a new movement form of the neck of the underwater creature into HUG and proposes a parallel mechanism to adjust the attitude angle and displacement of the HUG’s bow,which can improve the steering maneuverability.Firstly,the influence of bow movement and rotation on the hydrodynamic force and flow field of the whole machine is analyzed by using the Computational Fluid Dynamics(CFD)method.The degree of freedom,attitude control range and movement amount of the Movable Bow Mechanism(MBM)are obtained,and then the design of MBM is completed based on these constraints.Secondly,the kinematic and dynamic models of MBM are established based on the closed vector method and the Lagrange equation,respectively,which are fully verified by comparing the results of simulation in Matlab and Adams software,then a Radial Basis Function(RBF)neural network adaptive sliding mode controller is designed to improve the dynamic response effect of the output parameters of MBM.Finally,a prototype of MBM is manufactured and assembled.The kinematic,dynamics model and controller are verified by experiments,which provides a basis for applying MBM in HUGs.
基金supported by National Key R&D Program of China(2021YFE0193500)National Natural Science Foundation of China(12105026 and 11875011).
文摘We simulate an optomechanical system via a cavity QED scenario with a movable atom and investigate its application in the tiny mass sensing.We find that the steady-state solution of the system exhibits a multiple stability behavior,which is similar to that in the optomechanical system.We explain this phenomenon by the opto-mechanical interaction term in the effective Hamiltonian.Due to the dressed states formed by the effective coupling between the vibration degree of the atom and the optical mode in the cavity,we observe a narrow transparent window in the output field.We utilize this vibration induced transparency phenomenon to perform the tiny mass sensing.We hope our study will broaden the application of the cavity QED system to quantum technologies.
基金the National Key Research and Development Program of China(No.2016YFC0400202)the Project of New Agricultural Machinery in Jiangsu Province(No.NJ2016-11)+1 种基金the Postdoctoral Science Foundation Special Support of China(No.2016T90428)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘The evaluation of the performance of distribution uniformity by linearly moved irrigation system(LMIS)should consider the impacts of non uniformity of the water on crop yield.With increasing pressures to improve water use efficiency,plant productivity and farm profitability,questions continue to be raised concerning the future direction of irrigated agriculture.This study therefore aimed at evaluating water distribution under LMIS newly designed by the National Research Centre of Fluid Machinery Engineering and Technology,Jiangsu University,China.This article reports the real distribution of irrigation water under the LMIS with respect to sprinkler height above the ground surface as well as the consequence of different operating pressures.Water distribution coefficients used in the performance assessment were Christiansen’s coefficient of uniformity(CU),distribution uniformity(DU),scheduling coefficients(Sc)and the coefficient of variation(CV).The results showed that the mean CU ranged from 82.30%to 93.17%,and mean DU ranged from 70.39%to 88.44%.Also Sc values ranged from 1.13 to 1.42 with CV values ranging from 10.3%to 22.5%.The optimum method and results in this study can provide a reference to the operations for saving water and cost in the application of LMIS.
文摘The largest movable mold EMS developed by POSCO in collaboration with Daineli-Rotelec for improving internal quality of a large CC bloom is being used at a large size bloom caster of POSCO since 2011.Internal quality of carbon steel CC bloom of 700×700 mm^2 section size with the mold EMS was much improved compared with without the mold EMS.Equiaxed zone ratio increased from 50%to 100%and the grain of equiaxed structure became globular and fine.Top shrinkage was also much reduced by applying the movable mold EMS.
