Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of...Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.展开更多
SAGD horizontal wells are used to enhance oil recovery from heavy oil reservoirs.This technology requires precise separation between the production well and the injection well to ensure the efficient drainage of the r...SAGD horizontal wells are used to enhance oil recovery from heavy oil reservoirs.This technology requires precise separation between the production well and the injection well to ensure the efficient drainage of the reservoir.By studying the attitude of the downhole probe tube and the production well trajectory,an algorithm is proposed for eliminating ferromagnetic interference while drilling injection wells.A high accuracy filter circuit has been designed to correct the detected magnetic signals,which are ultra-weak,frequency-instable,and narrow-band.The directional drilling magnetic guidance system（DD-MGS） has been developed by integrating these advanced techniques.It contains a sub-system for the ranging calculation software,a magnetic source,a downhole probe tube and a sub-system for collecting ＆ processing the detected signals.The DD-MGS has succeeded in oilfield applications.It can guide the directional drilling trajectory not only in the horizontal section but also in the build section of horizontal injection wells.This new technology has broad potential applications.展开更多
Electromagnetic logging while drilling(LWD)is one of the key technologies of the geosteering and formation evaluation for high-angle and horizontal wells.In this paper,we solve the dipole source-generated magnetic/ele...Electromagnetic logging while drilling(LWD)is one of the key technologies of the geosteering and formation evaluation for high-angle and horizontal wells.In this paper,we solve the dipole source-generated magnetic/electric fields in 2D formations efficiently by the 2.5D finite diff erence method.Particularly,by leveraging the field’s rapid attenuation in spectral domain,we propose truncated Gauss–Hermite quadrature,which is several tens of times faster than traditional inverse fast Fourier transform.By applying the algorithm to the LWD modeling under complex formations,e.g.,folds,fault and sandstone pinch-outs,we analyze the feasibility of the dimension reduction from 2D to 1D.For the formations with smooth lateral changes,like folds,the simplified 1D model’s results agree well with the true responses,which indicate that the 1D simplification with sliding window is feasible.However,for the formation structures with drastic rock properties changes and sharp boundaries,for instance,faults and sandstone pinch-outs,the simplified 1D model will lead to large errors and,therefore,2.5D algorithms should be applied to ensure the accuracy.展开更多
The mode of load and deformation of directional drilling string and the expression of trigonometric series of deflection equation are established by means of elastic deformation energy and of the vertical and horizont...The mode of load and deformation of directional drilling string and the expression of trigonometric series of deflection equation are established by means of elastic deformation energy and of the vertical and horizontal bending. A calculation formula for natural frequency of horizontal resonance and rotational speed is derived based on the calculation method by Ritz, with which analysis is made for the cause and affecting factors of the excessive abrasion of heavy-weight drill pipe in high-angle holes so as to provide reference and basis for rational selection of drilling parameters and drilling tools in the future high-angle directional drilling.展开更多
In coalmines of China, horizontal directional drilling （HDD） is an increasingly popular method for underground in-seam gas drainage. Numerical simulation, especially finite element analysis, is often used as an effe...In coalmines of China, horizontal directional drilling （HDD） is an increasingly popular method for underground in-seam gas drainage. Numerical simulation, especially finite element analysis, is often used as an effective method to improve HDD operation. These improvements focus on rock-breaking efficiency, directional precision, stability of the borehole wall, and reliability of the drill equipment. On the basis of underground drilling characteristics, typical numerical simulation exam- ples in drilling techniques and equipment are summarized and analyzed. In the end, the future development trends of numerical simulation in underground in-seam drilling are proposed.展开更多
The challenging characteristics of shale formations often require horizontal drilling to economically develop their potential. While every shale gas play is unique, there are several best practices for the proper plan...The challenging characteristics of shale formations often require horizontal drilling to economically develop their potential. While every shale gas play is unique, there are several best practices for the proper planning and execution of a horizontal well. In planning a horizontal well, the optimal method and technology for building inclination and extending the lateral section must be determined. Properly specified logging-while-drilling tools are essential to keep the wellbore within the target formation. Planning must also focus on casing design. Doing so will help ensure stability and enable reliable and productive completions. Shales pose a challenge for these elements of well planning due to their thin strata and potentially low mechanical competence when foreign fluids are introduced. Once a plan is developed, executing it is even more important to prove a viable exploration program. Fast, efficient drilling with wellbore control and minimal torque and drag should be the priority. This may be achieved by focusing on fluid hydraulics and rheology and bottom hole assembly. Managed pressure drilling (MPD) will help fast drilling, well control and stability. If MPD can be combined with new generation rotary steerable systems that allow the drill string to maintain rotation, impressive efficiencies are possible. Modern drilling parameter analysis represents the newest opportunity for executing shale gas horizontal wells. A method for ROP analysis to improve operational parameters and equipment selection is also proposed.展开更多
In designing a horizontal directional drilling (HDD) pipeline project, designers face the challenge of determining the regions of maximum and minimum stresses on pipelines, ensuring the stability of the bore-hole from...In designing a horizontal directional drilling (HDD) pipeline project, designers face the challenge of determining the regions of maximum and minimum stresses on pipelines, ensuring the stability of the bore-hole from collapse and minimizing the stresses induced on the pipeline due to the bore-profile. This study analyses the stress induced on an HDD pipeline system using the ANSYS Version 18, mechanical APDL finite element (FE) software. The pipeline used as the case study was a gas transmission pipeline installed in south-west Nigeria. A macro-file for ANSYS Version 18, mechanical APDL used to model the pipeline was developed. The results showed that the maximum and minimum stresses induced on the HDD pipeline were at the top and bottom of the pipe, respectively;while the stresses on the sides were uniform (≈888 kg/cm2) all through the pipeline, irrespective of element number. The maximum stress occurred at the curvature point with the highest entry angle (10°), resulting in a maximum deflection at this point. The model stress validation performed by comparing results with theoretical solutions, both with respect to radius of curvature and internal pressure, showed percentage difference (errors) less than 10%. The cross sectional area validation showed a percentage difference of 0.059%.展开更多
As a highly efficient production method, the technique of multi-branch horizontal well is widely used in low permeability reservoirs, heavy oil reservoirs, shallow layer reservoirs and multi-layer reservoirs, because ...As a highly efficient production method, the technique of multi-branch horizontal well is widely used in low permeability reservoirs, heavy oil reservoirs, shallow layer reservoirs and multi-layer reservoirs, because it can significantly improve the productivity of a single well, inhibit coning and enhance oil recovery. Study on sweep efficiency and parameters optimization of multi-branch horizontal well is at the leading edge of research. Therefore, the study is important for enhancing oil recovery and integral exploitation benefit of oil fields. In many applications, streamline simulation shows particular advantages over finite-difference simulation. With the advantages of streamline simulation such as its ability to display paths of fluid flow and acceleration factor in simulation, the flooding process is more visual. The communication between wells and flooding area has been represented appropriately. This method has been applied to the XS9 reservoir in Daqing Oilfield. The production history of this reservoir is about 10 years. The reservoir is maintained above bubble point so that the simulation meets the slight compressibility assumption. New horizontal wells are drilled following this rule.展开更多
Natural gas is easily soluble in oil-based muds(OBM),leading to complex flow behavior in wellbores,especially in horizontal wells.In this study,a new transient flow model considering wellbore-formation coupling and ga...Natural gas is easily soluble in oil-based muds(OBM),leading to complex flow behavior in wellbores,especially in horizontal wells.In this study,a new transient flow model considering wellbore-formation coupling and gas solubility on flow behavior is developed to simulate gas kicks during horizontal drilling with OBM.Furthermore,the effect of gas solubility on parameters such as bottom-hole pressure(BHP),gas void fraction and mixture velocity in the flow behavior is analyzed.Finally,several critical factors affecting flow behavior are investigated and compared to gas kicks in water-based muds(WBM)where the effect of solubility is neglected.The results show that the invading gas exists as dissolved gas in the OBM and as free gas in the WBM.Before the gas escapes from the OBM,the pit gain is zero and there is barely any change in the BHP,annulus return flow rate and mixture velocity,which means that detecting gas kicks through these warning signs can be challenging until they get very close to the surface and develop rapidly.However,in WBM drilling,these parameters change quickly with the increasing gas kick time.Additionally,for both cases,the longer the horizontal length and the greater reservoir permeability,the greater the decrease in BHP,and the shorter the time for gas to migrate from the bottom-hole to the wellhead.A larger flow rate contributes to a greater initial BHP and a lesser BHP reduction.This research is of value in characterizing gas kick behavior and identifying novel ways for early gas kick detection during horizontal drilling with OBM.展开更多
A horizontality adjusting system of the earth drill's platform is designed todeal with the operation difficulty of the platform which appeared while the earth drill is used.The proportional-impulse control to elim...A horizontality adjusting system of the earth drill's platform is designed todeal with the operation difficulty of the platform which appeared while the earth drill is used.The proportional-impulse control to eliminate the over-adjustment andelectricity-hydraulic-proportional control to drive the adjusting mechanism are adopted in thesystem. The control scheme and control algorithm are introduced in detail. The software flow chartis given.展开更多
Coalbed methane(CBM)drilling and completion technologies(DCTs)are signifcant basis for achieving efcient CBM exploration and exploitation.Characteristics of CBM reservoirs vary in diferent regions around the world,the...Coalbed methane(CBM)drilling and completion technologies(DCTs)are signifcant basis for achieving efcient CBM exploration and exploitation.Characteristics of CBM reservoirs vary in diferent regions around the world,thereby,it is crucial to develop,select and apply the optimum DCTs for each diferent CBM reservoir.This paper frstly reviews the development history of CBM DCTs throughout worldwide and clarifes its overall development tendency.Secondly,diferent well types and its characteristics of CBM exploitation are summarized,and main application scopes of these well types are also discussed.Then,the key technologies of CBM drilling(directional drilling tools,measurement while drilling,geo-steering drilling,magnetic guidance drilling,underbalanced drilling and drilling fuids),and the key technologies of CBM completion(open-hole,cavity and under-ream completion,cased-hole completion,screen pipe completion and horizontal well completion)are summarized and analyzed,it is found that safe,economic and efcient development of CBM is inseparable from the support of advanced technologies.Finally,based on the current status of CBM development,the achievements,existing challenges and future prospects are summarized and discussed from the perspective of CBM DCTs.展开更多
Multilateral wells promise cost savings to oil and fields as they have the potential to reduce overall drilling distances and minimize the number of slots required for the surface facility managing the well.However,dr...Multilateral wells promise cost savings to oil and fields as they have the potential to reduce overall drilling distances and minimize the number of slots required for the surface facility managing the well.However,drilling a multilateral well does not always increase the flow rate when compared to two single-horizontal wells due to competition in production inside the mother-bore.Here,a holistic approach is proposed to find the optimum balance between single and multilateral wells in an offshore oil development.In so doing,the integrated approach finds the highest Net Present Value(NPV)configuration of the field considering drilling,subsurface,production and financial analysis.The model employs stochastic perturbation and Markov Chain Monte-Carlo methods to solve the global maximising-NPV problem.In addition,a combination of Mixed-Integer Linear Programming(MILP),an improved Dijkstra algorithm and a Levenberg-Marquardt optimiser is proposed to solve the rate allocation problem.With the outcome from this analysis,the model suggests the optimum development including number of multilateral and single horizontal wells that would result in the highest NPV.The results demonstrate the potential for modelling to find the optimal use of petroleum facilities and to assist with planning and decision making.展开更多
Hydrocarbon exploration has evolved over the years from shallow subsurface to deep subsurface prospecting in both onshore and marine environment.In accordance,technical development has encouraged exploration of unconv...Hydrocarbon exploration has evolved over the years from shallow subsurface to deep subsurface prospecting in both onshore and marine environment.In accordance,technical development has encouraged exploration of unconventional reservoirs and development of deeply buried ones.The deeply buried carbonate reservoir in the Tarim Basin have attracted considerable attention(Lee,1985;Neil,1997;Jin et al.,2009,2015).Such deeply buried reservoirs requires careful and accurate well landing and borehole navigation through multiple regions of HC accumulation and precise well closing process involving accurate selection of positions for screens and so on.展开更多
Oil exploration and production,well stability,sand production,geothermal drilling,waste-water or CO_(2) sequestration,geohazards assessment,and EOR processes such as hydraulic fracturing,require adequate information a...Oil exploration and production,well stability,sand production,geothermal drilling,waste-water or CO_(2) sequestration,geohazards assessment,and EOR processes such as hydraulic fracturing,require adequate information about in-situ stresses.There are several methods for analyzing the magnitude and direction of in-situ stresses.The evaluation of tensile fractures and shear fractures in vertical oil and gas wellbores using image logs is one of these methods.Furthermore,when image logs are run in boreholes,they can be extremely costly and possibly stop the drilling.The data for this study were gathered from seven directional wells drilled into a strike-slip fault reservoir in southern Iran.Vertical stress,minimum horizontal stress,pore pressure,Poisson's ratio of formations,and 233 mud loss reporting points make up the entire data.This is the first time maximum horizontal stress direction has been calculated without referring to image log data.In addition,the points of lost circulation were categorized into natural and induced fracture.The results revealed that,the maximum horizontal stress direction of the reservoir was calculated at 65northeast-southwest.The error rate is roughly 10when comparing the results of this investigation to those obtained from the image log.The maximum horizontal stress direction is calculated precisely.In terms of tensile fracture pressure,the in-situ stress ratio identifies the safest as well as the most critical inclination and azimuth for each well.展开更多
Horizontal directional drilling(HDD)is a widely used trenchless method for underground utility connections.The associated ground settlement triggered by HDD depends on the size,types,and surface texture of pipe,diamet...Horizontal directional drilling(HDD)is a widely used trenchless method for underground utility connections.The associated ground settlement triggered by HDD depends on the size,types,and surface texture of pipe,diameter of borehole,and soil conditions.The pre-sent study investigates the surface settlement due to the construction of a 1067 mm diameter HDD,which will replace an existing sewer siphon under the SR-60 highway in Chino,California using empirical,and numerical methods.Based on the results obtained from the subsurface investigation,an empirical analysis was conducted first.followed by numerical modeling of the HDD using PLAXIS 2D soft-ware.A careful comparison between two different methods indicated closer values of surface settlement between the empirical method(7.3 mm)and the numerical modeling(4.6 mm).In addition,the shape of surface settlement and horizontal settlement curves for the empirical and numerical methods was found to be similar.The minor discrepancy between the two methods resulted as the numerical model can host several soil layers whereas the empirical equation can use only one type of soil.Finally,a parametric study was conducted to evaluate the effect of borehole cover depth,size,and soil parameters on surface settlement.It was observed that soil strength param-eters yielded a greater effect on surface movement,whereas modulus of elasticity has a relatively smaller influence with zero contribution from Poisson’s ratio.展开更多
基金Supported by the Project of National Natural Science Foundation of China(52234002,42230814)。
文摘Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.
基金the financial support from the Natural Science Foundation of China (NSFC, 51221003, U1262201)supported by other projects (Grant numbers: 2011ZX05009, 2013AA064803)
文摘SAGD horizontal wells are used to enhance oil recovery from heavy oil reservoirs.This technology requires precise separation between the production well and the injection well to ensure the efficient drainage of the reservoir.By studying the attitude of the downhole probe tube and the production well trajectory,an algorithm is proposed for eliminating ferromagnetic interference while drilling injection wells.A high accuracy filter circuit has been designed to correct the detected magnetic signals,which are ultra-weak,frequency-instable,and narrow-band.The directional drilling magnetic guidance system（DD-MGS） has been developed by integrating these advanced techniques.It contains a sub-system for the ranging calculation software,a magnetic source,a downhole probe tube and a sub-system for collecting ＆ processing the detected signals.The DD-MGS has succeeded in oilfield applications.It can guide the directional drilling trajectory not only in the horizontal section but also in the build section of horizontal injection wells.This new technology has broad potential applications.
基金the National Natural Science Foundation of China (41674131,41574118,41974146,41904109)the Fundamental Research Funds for the Central Universities (17CX06041,17CX06044)the China National Science and Technology Major Project (2016ZX05007-004,2017ZX05072-002)
文摘Electromagnetic logging while drilling(LWD)is one of the key technologies of the geosteering and formation evaluation for high-angle and horizontal wells.In this paper,we solve the dipole source-generated magnetic/electric fields in 2D formations efficiently by the 2.5D finite diff erence method.Particularly,by leveraging the field’s rapid attenuation in spectral domain,we propose truncated Gauss–Hermite quadrature,which is several tens of times faster than traditional inverse fast Fourier transform.By applying the algorithm to the LWD modeling under complex formations,e.g.,folds,fault and sandstone pinch-outs,we analyze the feasibility of the dimension reduction from 2D to 1D.For the formations with smooth lateral changes,like folds,the simplified 1D model’s results agree well with the true responses,which indicate that the 1D simplification with sliding window is feasible.However,for the formation structures with drastic rock properties changes and sharp boundaries,for instance,faults and sandstone pinch-outs,the simplified 1D model will lead to large errors and,therefore,2.5D algorithms should be applied to ensure the accuracy.
文摘The mode of load and deformation of directional drilling string and the expression of trigonometric series of deflection equation are established by means of elastic deformation energy and of the vertical and horizontal bending. A calculation formula for natural frequency of horizontal resonance and rotational speed is derived based on the calculation method by Ritz, with which analysis is made for the cause and affecting factors of the excessive abrasion of heavy-weight drill pipe in high-angle holes so as to provide reference and basis for rational selection of drilling parameters and drilling tools in the future high-angle directional drilling.
基金Supported by the National Natural Science Foundation of China （50805010） the Natural Science Foundation of Shaanxi Province （2011JM70 17）
文摘In coalmines of China, horizontal directional drilling （HDD） is an increasingly popular method for underground in-seam gas drainage. Numerical simulation, especially finite element analysis, is often used as an effective method to improve HDD operation. These improvements focus on rock-breaking efficiency, directional precision, stability of the borehole wall, and reliability of the drill equipment. On the basis of underground drilling characteristics, typical numerical simulation exam- ples in drilling techniques and equipment are summarized and analyzed. In the end, the future development trends of numerical simulation in underground in-seam drilling are proposed.
文摘The challenging characteristics of shale formations often require horizontal drilling to economically develop their potential. While every shale gas play is unique, there are several best practices for the proper planning and execution of a horizontal well. In planning a horizontal well, the optimal method and technology for building inclination and extending the lateral section must be determined. Properly specified logging-while-drilling tools are essential to keep the wellbore within the target formation. Planning must also focus on casing design. Doing so will help ensure stability and enable reliable and productive completions. Shales pose a challenge for these elements of well planning due to their thin strata and potentially low mechanical competence when foreign fluids are introduced. Once a plan is developed, executing it is even more important to prove a viable exploration program. Fast, efficient drilling with wellbore control and minimal torque and drag should be the priority. This may be achieved by focusing on fluid hydraulics and rheology and bottom hole assembly. Managed pressure drilling (MPD) will help fast drilling, well control and stability. If MPD can be combined with new generation rotary steerable systems that allow the drill string to maintain rotation, impressive efficiencies are possible. Modern drilling parameter analysis represents the newest opportunity for executing shale gas horizontal wells. A method for ROP analysis to improve operational parameters and equipment selection is also proposed.
文摘In designing a horizontal directional drilling (HDD) pipeline project, designers face the challenge of determining the regions of maximum and minimum stresses on pipelines, ensuring the stability of the bore-hole from collapse and minimizing the stresses induced on the pipeline due to the bore-profile. This study analyses the stress induced on an HDD pipeline system using the ANSYS Version 18, mechanical APDL finite element (FE) software. The pipeline used as the case study was a gas transmission pipeline installed in south-west Nigeria. A macro-file for ANSYS Version 18, mechanical APDL used to model the pipeline was developed. The results showed that the maximum and minimum stresses induced on the HDD pipeline were at the top and bottom of the pipe, respectively;while the stresses on the sides were uniform (≈888 kg/cm2) all through the pipeline, irrespective of element number. The maximum stress occurred at the curvature point with the highest entry angle (10°), resulting in a maximum deflection at this point. The model stress validation performed by comparing results with theoretical solutions, both with respect to radius of curvature and internal pressure, showed percentage difference (errors) less than 10%. The cross sectional area validation showed a percentage difference of 0.059%.
文摘As a highly efficient production method, the technique of multi-branch horizontal well is widely used in low permeability reservoirs, heavy oil reservoirs, shallow layer reservoirs and multi-layer reservoirs, because it can significantly improve the productivity of a single well, inhibit coning and enhance oil recovery. Study on sweep efficiency and parameters optimization of multi-branch horizontal well is at the leading edge of research. Therefore, the study is important for enhancing oil recovery and integral exploitation benefit of oil fields. In many applications, streamline simulation shows particular advantages over finite-difference simulation. With the advantages of streamline simulation such as its ability to display paths of fluid flow and acceleration factor in simulation, the flooding process is more visual. The communication between wells and flooding area has been represented appropriately. This method has been applied to the XS9 reservoir in Daqing Oilfield. The production history of this reservoir is about 10 years. The reservoir is maintained above bubble point so that the simulation meets the slight compressibility assumption. New horizontal wells are drilled following this rule.
基金supported by the Postdoctoral Program of PetroChina Southwest Oil&Gas Field Company (Grant No.20220302-21).
文摘Natural gas is easily soluble in oil-based muds(OBM),leading to complex flow behavior in wellbores,especially in horizontal wells.In this study,a new transient flow model considering wellbore-formation coupling and gas solubility on flow behavior is developed to simulate gas kicks during horizontal drilling with OBM.Furthermore,the effect of gas solubility on parameters such as bottom-hole pressure(BHP),gas void fraction and mixture velocity in the flow behavior is analyzed.Finally,several critical factors affecting flow behavior are investigated and compared to gas kicks in water-based muds(WBM)where the effect of solubility is neglected.The results show that the invading gas exists as dissolved gas in the OBM and as free gas in the WBM.Before the gas escapes from the OBM,the pit gain is zero and there is barely any change in the BHP,annulus return flow rate and mixture velocity,which means that detecting gas kicks through these warning signs can be challenging until they get very close to the surface and develop rapidly.However,in WBM drilling,these parameters change quickly with the increasing gas kick time.Additionally,for both cases,the longer the horizontal length and the greater reservoir permeability,the greater the decrease in BHP,and the shorter the time for gas to migrate from the bottom-hole to the wellhead.A larger flow rate contributes to a greater initial BHP and a lesser BHP reduction.This research is of value in characterizing gas kick behavior and identifying novel ways for early gas kick detection during horizontal drilling with OBM.
文摘A horizontality adjusting system of the earth drill's platform is designed todeal with the operation difficulty of the platform which appeared while the earth drill is used.The proportional-impulse control to eliminate the over-adjustment andelectricity-hydraulic-proportional control to drive the adjusting mechanism are adopted in thesystem. The control scheme and control algorithm are introduced in detail. The software flow chartis given.
基金supported by the Youth Scientific and Technological Innovation Team Foundation of Southwest Petroleum University(2019CXTD09)the Program of Introducing Talents of Discipline to Chinese Universities(111 Plan)(D18016).
文摘Coalbed methane(CBM)drilling and completion technologies(DCTs)are signifcant basis for achieving efcient CBM exploration and exploitation.Characteristics of CBM reservoirs vary in diferent regions around the world,thereby,it is crucial to develop,select and apply the optimum DCTs for each diferent CBM reservoir.This paper frstly reviews the development history of CBM DCTs throughout worldwide and clarifes its overall development tendency.Secondly,diferent well types and its characteristics of CBM exploitation are summarized,and main application scopes of these well types are also discussed.Then,the key technologies of CBM drilling(directional drilling tools,measurement while drilling,geo-steering drilling,magnetic guidance drilling,underbalanced drilling and drilling fuids),and the key technologies of CBM completion(open-hole,cavity and under-ream completion,cased-hole completion,screen pipe completion and horizontal well completion)are summarized and analyzed,it is found that safe,economic and efcient development of CBM is inseparable from the support of advanced technologies.Finally,based on the current status of CBM development,the achievements,existing challenges and future prospects are summarized and discussed from the perspective of CBM DCTs.
文摘Multilateral wells promise cost savings to oil and fields as they have the potential to reduce overall drilling distances and minimize the number of slots required for the surface facility managing the well.However,drilling a multilateral well does not always increase the flow rate when compared to two single-horizontal wells due to competition in production inside the mother-bore.Here,a holistic approach is proposed to find the optimum balance between single and multilateral wells in an offshore oil development.In so doing,the integrated approach finds the highest Net Present Value(NPV)configuration of the field considering drilling,subsurface,production and financial analysis.The model employs stochastic perturbation and Markov Chain Monte-Carlo methods to solve the global maximising-NPV problem.In addition,a combination of Mixed-Integer Linear Programming(MILP),an improved Dijkstra algorithm and a Levenberg-Marquardt optimiser is proposed to solve the rate allocation problem.With the outcome from this analysis,the model suggests the optimum development including number of multilateral and single horizontal wells that would result in the highest NPV.The results demonstrate the potential for modelling to find the optimal use of petroleum facilities and to assist with planning and decision making.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(NO.XDA140500001)
文摘Hydrocarbon exploration has evolved over the years from shallow subsurface to deep subsurface prospecting in both onshore and marine environment.In accordance,technical development has encouraged exploration of unconventional reservoirs and development of deeply buried ones.The deeply buried carbonate reservoir in the Tarim Basin have attracted considerable attention(Lee,1985;Neil,1997;Jin et al.,2009,2015).Such deeply buried reservoirs requires careful and accurate well landing and borehole navigation through multiple regions of HC accumulation and precise well closing process involving accurate selection of positions for screens and so on.
文摘Oil exploration and production,well stability,sand production,geothermal drilling,waste-water or CO_(2) sequestration,geohazards assessment,and EOR processes such as hydraulic fracturing,require adequate information about in-situ stresses.There are several methods for analyzing the magnitude and direction of in-situ stresses.The evaluation of tensile fractures and shear fractures in vertical oil and gas wellbores using image logs is one of these methods.Furthermore,when image logs are run in boreholes,they can be extremely costly and possibly stop the drilling.The data for this study were gathered from seven directional wells drilled into a strike-slip fault reservoir in southern Iran.Vertical stress,minimum horizontal stress,pore pressure,Poisson's ratio of formations,and 233 mud loss reporting points make up the entire data.This is the first time maximum horizontal stress direction has been calculated without referring to image log data.In addition,the points of lost circulation were categorized into natural and induced fracture.The results revealed that,the maximum horizontal stress direction of the reservoir was calculated at 65northeast-southwest.The error rate is roughly 10when comparing the results of this investigation to those obtained from the image log.The maximum horizontal stress direction is calculated precisely.In terms of tensile fracture pressure,the in-situ stress ratio identifies the safest as well as the most critical inclination and azimuth for each well.
文摘Horizontal directional drilling(HDD)is a widely used trenchless method for underground utility connections.The associated ground settlement triggered by HDD depends on the size,types,and surface texture of pipe,diameter of borehole,and soil conditions.The pre-sent study investigates the surface settlement due to the construction of a 1067 mm diameter HDD,which will replace an existing sewer siphon under the SR-60 highway in Chino,California using empirical,and numerical methods.Based on the results obtained from the subsurface investigation,an empirical analysis was conducted first.followed by numerical modeling of the HDD using PLAXIS 2D soft-ware.A careful comparison between two different methods indicated closer values of surface settlement between the empirical method(7.3 mm)and the numerical modeling(4.6 mm).In addition,the shape of surface settlement and horizontal settlement curves for the empirical and numerical methods was found to be similar.The minor discrepancy between the two methods resulted as the numerical model can host several soil layers whereas the empirical equation can use only one type of soil.Finally,a parametric study was conducted to evaluate the effect of borehole cover depth,size,and soil parameters on surface settlement.It was observed that soil strength param-eters yielded a greater effect on surface movement,whereas modulus of elasticity has a relatively smaller influence with zero contribution from Poisson’s ratio.
