Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC...Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC semiconductor device,an instrumentation amplifier(IA),two resistors,and a diode for disconnection detection.Based on the basic circuit,a multi-channel interface circuit was also implemented.The CJC was implemented using compensation semiconductor and IA,and disconnection detection was detected by using two resistors and a diode so that IA input voltage became-0.42 V.As a result of the experiment using R-type TC,the error of the designed circuit was reduced from 0.14 mV to 3μV after CJC in the temperature range of 0°C to 1400°C.In addition,it was confirmed that the output voltage of IA was saturated from 88 mV to-14.2 V when TC was disconnected from normal.The output voltage of the designed circuit was 0 V to 10 V in the temperature range of 0°C to 1400°C.The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel.The implemented multi-channel interface has a feature that can be applied equally to E,J,K,T,R,and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.展开更多
Most of existing metasurfaces usually have limited channel behavior,which seriouslyhinders their development and application.In this paper,we propose a multi-channel terahertz focused beam generator based on shared-ap...Most of existing metasurfaces usually have limited channel behavior,which seriouslyhinders their development and application.In this paper,we propose a multi-channel terahertz focused beam generator based on shared-aperture metasurface,and the generator consists of a top square metal strip,a middle layer of silica and a metal bottom plate.By changing the position and size of the shared-aperture array,the designed metasurface can generate any number of multi-channel focusing beams at different predicted positions.In addition,the energy intensity of focusing beams can be controlled.The full-wave simulation results show that the metasurface achieves four-channel vortex focused beam generation with different topological charges,and five-,six-,eight-channel focused beam generation with different energy intensities at a frequency of 1 THz,which are in good agreement with the theoretically calculated predictions.This work can provide a new idea for designing the terahertz multichannel devices.展开更多
Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex str...Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex structure or reflection features, the existing multi-channel inversion methods have to adopt the highly time-consuming strategy of arranging seismic data trace-by-trace, limiting its wide application in pre-stack inversion. A fast pre-stack multi-channel inversion constrained by seismic reflection features has been proposed to address this issue. The key to our method is to re-characterize the reflection features to directly constrain the pre-stack inversion through a Hadamard product operator without rearranging the seismic data. The seismic reflection features can reflect the distribution of the stratum reflection interface, and we obtained them from the post-stack profile by searching the shortest local Euclidean distance between adjacent seismic traces. Instead of directly constructing a large-size reflection features constraint operator advocated by the conventional methods, through decomposing the reflection features along the vertical and horizontal direction at a particular sampling point, we have constructed a computationally well-behaved constraint operator represented by the vertical and horizontal partial derivatives. Based on the Alternating Direction Method of Multipliers (ADMM) optimization, we have derived a fast algorithm for solving the objective function, including Hadamard product operators. Compared with the conventional reflection features constrained inversion, the proposed method is more efficient and accurate, proved on the Overthrust model and a field data set.展开更多
Due to the scattered nature of the network,data transmission in a dis-tributed Mobile Ad-hoc Network(MANET)consumes more energy resources(ER)than in a centralized network,resulting in a shorter network lifespan(NL).As...Due to the scattered nature of the network,data transmission in a dis-tributed Mobile Ad-hoc Network(MANET)consumes more energy resources(ER)than in a centralized network,resulting in a shorter network lifespan(NL).As a result,we build an Enhanced Opportunistic Routing(EORP)protocol architecture in order to address the issues raised before.This proposed routing protocol goal is to manage the routing cost by employing power,load,and delay to manage the routing energy consumption based on theflooding of control pack-ets from the target node.According to the goal of the proposed protocol techni-que,it is possible to manage the routing cost by applying power,load,and delay.The proposed technique also manage the routing energy consumption based on theflooding of control packets from the destination node in order to reduce the routing cost.Control packet exchange between the target and all the nodes,on the other hand,is capable of having an influence on the overall efficiency of the system.The EORP protocol and the Multi-channel Cooperative Neighbour Discovery(MCCND)protocol have been designed to detect the cooperative adja-cent nodes for each node in the routing route as part of the routing path discovery process,which occurs during control packet transmission.While control packet transmission is taking place during the routing path discovery process,the EORP protocol and the Multi-channel Cooperative Neighbour Discovery(MCCND)protocol have been designed to detect the cooperative adjacent nodes for each node in the routing.Also included is a simulation of these protocols in order to evaluate their performance across a wide range of packet speeds using Constant Bit Rate(CBR).When the packet rate of the CBR is 20 packets per second,the results reveal that the EORP-MCCND is 0.6 s quicker than the state-of-the-art protocols,according to thefindings.Assuming that the CBR packet rate is 20 packets per second,the EORP-MCCND achieves 0.6 s of End 2 End Delay,0.05 s of Routing Overhead Delay,120 s of Network Lifetime,and 20 J of Energy Consumption efficiency,which is much better than that of the state-of-the-art protocols.展开更多
为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达...为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达到网络信道冲突图的最大值。文章通过对无冲突信道算法的运用,最终证实其可以有效地提高传感器网络的工作效率,大幅度提升网络的吞吐量。展开更多
A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pu...A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pulse amplitude analyzer(TSMCA).A dual-port random access memory is divided into two storage spaces,one for current energy spectrum data acquisition and another for previous energy spectrum data storage.The two tasks can be performed simultaneously,and the time-related variation tendency of energy spectrum can be obtained.A prototype system of TSMCA is designed.It performs nicely,with maximum channel number of 4096 in capacity of 2^(32)/Ch,minimal time-sharing slice of 25 ms,the differential nonlinearity of <1.5%,and the integral nonlinearity of <0.3%.展开更多
We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footpr...We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ～7-ms tuning time and ～27-dB extinction ratio.展开更多
This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation techn...This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation technique and the linear unbiased estimation method. The estimation gains are developed by solving a set of Riccati equations, and a stability result about the state estimation is shown. Finally, an example is given to illustrate the efficiency of the receding horizon state estimation.展开更多
There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-cha...There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-channel chemical sensor to detect such anomalies which can be used in deep-sea at depths of more than 4 000 m. The design allowed five all-solid-state electrodes to be mounted on it and each (apart from one reference electrode) could be changed according to chemicals to be measured. Two experiments were conducted using the chemical sensors. The first was a shallow-sea trial which included sample measurements and in situ monitoring. pH, Eh, CO3^2- and SO4^2- electrodes were utilized to demonstrate that the chemical sensor was accurate and stable outside the laboratory. In the second experiment, the chemical sensor was integrated with pH, Eh, CO3^2- and H2S electrodes, and was used in 29 scans of the seabed along the Southwest Indian Ridge (SWIR) to detect hydrothermal vents, from which 27 sets of valid data were obtained. Hydrothermal vents were identified by analyzing the chemical anomalies, the primary judging criteria were decreasing voltages of Eh and H2S, matched by increasing voltages of pH and CO3^2- . We proposed that simultaneous detection of changes in these parameters will indicate a hydrothermal vent. Amongst the 27 valid sets of data, five potential hydrothermal vents were targeted using the proposed method. We suggest that our sensors could be widely employed by marine scientists.展开更多
Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP)...Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP).By computation,the velocity fields of both the gas and the solid phases were simulated and the track of the solid phase was analyzed in detail.It can be found that the velocities of the two phases are able to reach an ultrasonic level;meanwhile,the dispersion width of the solid phase at the nozzle exit is less than that of the gas phase.When particle diameters are less than 5 μm,there is a decreasing trend in the dispersion width of the solid phase with an increase in particle diameters.The trend becomes stable as the particle diameters are greater than 5 μm;in the meantime,the distribution of solid particles is near the axis of the jet flow.The optimal standoff distance between the nozzle and the substrate in the process of USPP is about 120 mm.Simulation results can help improve the design of mass-production-oriented multi-channel nozzles for SNC induced by USPP.展开更多
A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharg...A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown展开更多
High-speed real-time digital frequency analysis is one major field of Fast Fourier Transform(FFT)application,such as Synthetic Aperture Radar(SAR)processing and medical imaging.In SAR processing,the image size could b...High-speed real-time digital frequency analysis is one major field of Fast Fourier Transform(FFT)application,such as Synthetic Aperture Radar(SAR)processing and medical imaging.In SAR processing,the image size could be 4 k×4 k in normal and it has become larger over the years.In the view of real-time,extensibility and reusable characteristics,an Field Programmable Gate Array(FPGA)based multi-channel variable-length FFT architecture which adopts radix-2 butterfly algorithm is proposed in this paper.The hardware implementation of FFT is partially reconfigurable architecture.Firstly,the proposed architecture in the paper has flexibility in terms of chip area,speed,resource utilization and power consumption.Secondly,the proposed architecture combines serial and parallel methods in its butterfly computations.Furthermore,on system-level issue,the proposed architecture takes advantage of state processing in serial mode and data processing in parallel mode.In case of sufficient FPGA resources,state processing of serial mode mentioned above is converted to pipeline mode.State processing of pipeline mode achieves high throughput.展开更多
Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep ...Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep stages using multi-biological signals such as electroencephalography(EEG),electrocardiogram(ECG),electromyogram(EMG),and electrooculogram(EOG).Most of the prior studies in sleep stage classification focus on hand-crafted feature extraction methods.Traditional hand-crafted feature extraction methods choose features manually from raw data,which is tedious,and these features are limited in their ability to balance efficiency and accuracy.Moreover,most of the existing works on sleep staging are either single channel(a single-lead EEG may not contain enough information)or only EEG signal based which can not reveal more complicated physical features for reliable classification of various sleep stages.This study proposes an approach to combine Convolutional Neural Networks(CNNs)and Gated Recurrent Units(GRUs)that can discover hidden features from multi-biological signal data to recognize the different sleep stages efficiently.In the proposed scheme,the CNN is designed to extract concealed features from the multi-biological signals,and the GRU is employed to automatically learn the transition rules among different sleep stages.After that,the softmax layers are used to classify various sleep stages.The proposed method was tested on two publicly available databases:Sleep Heart Health Study(SHHS)and St.Vincent’s University Hospital/University College Dublin Sleep Apnoea(UCDDB).The experimental results reveal that the proposed model yields better performance compared to state-of-the-art works.Our proposed scheme will assist in building a new system to deal with multi-channel or multi-modal signal processing tasks in various applications.展开更多
Multi-channel can be used to provide higher transmission ability to the bandwidth-intensive and delay-sensitive real-time streams. However, traditional channel capacity theories and coding schemes are seldom designed ...Multi-channel can be used to provide higher transmission ability to the bandwidth-intensive and delay-sensitive real-time streams. However, traditional channel capacity theories and coding schemes are seldom designed for the real-time streams with strict delay constraint, especially in multi-channel context. This paper considers a real-time stream system, where real-time messages with different importance should be transmitted through several packet erasure channels, and be decoded by the receiver within a fixed delay. Based on window erasure channels and i.i.d.(identically and independently distributed) erasure channels, we derive the Multi-channel Real-time Stream Transmission(MRST) capacity models for Symmetric Real-time(SR) streams and Asymmetric Real-time(AR) streams respectively. Moreover, for window erasures, a Maximum Equilibrium Intra-session Code(MEIC) is presented for SR and AR streams, and is shown able to asymptotically achieve the theoretical MRST capacity. For i.i.d. erasures, we propose an Adaptive Maximum Equilibrium Intra-session Code(AMEIC), and then prove AMEIC can closely approach the MRST transmission capacity. Finally, the performances of the proposed codes are verified by simulations.展开更多
A multi-channeled filter based on branchy defect in a microstrip photonic crystal was proposed. By introducing a branchy structure across the defect region, multiple defect modes will appear inside the photonic gap, l...A multi-channeled filter based on branchy defect in a microstrip photonic crystal was proposed. By introducing a branchy structure across the defect region, multiple defect modes will appear inside the photonic gap, leading to the multi-channeled filtering phenomenon. In comparison with the conventional multi-channeled filters, the proposed structure is more compact and tunable as far as the device volume and fabrication are concerned. The microwave experiment results are found in agreement with simulation results.展开更多
The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data a...The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data accuracy from seismic data.In this work,a case study was carried out in the Baima area of Wulong,in order to develop a workflow for accurately predicting shale gas formation pressure.The multi-channel stack method was first used,as well as the inversion of single-channel seismic data,to construct velocity and density models of the formation.Combined with the existing welllogging data,the velocity and density models of the whole well section were established.The shale gas formation pressure was then estimated using the Eaton method.The results show that the multi-channel seismic stacking method has a higher accuracy than the inversion of the formation velocity obtained by the single-channel seismic method.The discrepancies between our predicted formation pressure and the actual formation pressure measurement are within an acceptable range,indicating that our workflow is effective.展开更多
Wireless Sensor Networks(WSNs)can be termed as an autoconfigured and infrastructure-less wireless networks to monitor physical or environmental conditions,such as temperature,sound,vibration,pressure and motion etc.WS...Wireless Sensor Networks(WSNs)can be termed as an autoconfigured and infrastructure-less wireless networks to monitor physical or environmental conditions,such as temperature,sound,vibration,pressure and motion etc.WSNs may comprise thousands of Internet of Things(IoT)devices to sense and collect data from its surrounding,process the data and take an automated and mechanized decision.On the other side the proliferation of these devices will soon cause radio spectrum shortage.So,to facilitate these networks,we integrate Cognitive Radio(CR)functionality in these networks.CR can sense the unutilized spectrum of licensed users and then use these empty bands when required.In order to keep the IoT nodes functional all time,continuous energy is required.For this reason the energy harvested techniques are preferred in IoT networks.Mainly it is preferred to harvest Radio Frequency(RF)energy in the network.In this paper a region based multi-channel architecture is proposed.In which the coverage area of primary node is divided as Energy Harvesting Region and Communication Region.The Secondary User(SU)that are the licensed user is IoT enabled with Cognitive Radio(CR)techniques so we call it CR-enabled IoT node/device and is encouraged to harvest energy by utilizing radio frequency energy.To harvest energy efficiently and to reduce the energy consumption during sensing,the concept of overlapping region is given that supports to sense multiple channels simultaneously and help the SU to find best channel for transmitting data or to harvest energy from the ideal channel.From the experimental analysis,it is proved that SU can harvest more energy in overlapping region and this architecture proves to consume less energy during data transmission as compared to single channel.We also show that channel load can be highly reduced and channel utilization is proved to be more proficient.Thus,this proves the proposed architecture cost-effective and energy-efficient.展开更多
Improving capacity and reducing delay are the most challenging topics in wireless ad hoc networks. Nodes that equip multiple radios working on different channels simultaneously permit ef-fective utility of frequency s...Improving capacity and reducing delay are the most challenging topics in wireless ad hoc networks. Nodes that equip multiple radios working on different channels simultaneously permit ef-fective utility of frequency spectrum and can also reduce interference. In this paper, after analyzing several current protocols in Multi-Radio Multi-Channel (MR-MC) ad hoc networks, a new multi-channel routing metric called Integrative Route Metric (IRM) is designed. It takes channel load, inter-flow, and intra-flow interference into consideration. In addition, an MR-MC routing protocol based on Interference-Aware and Channel-Load (MR-IACL) is also presented. The MR-IACL can assign channels and routings for nodes according to channel load and interference degree of links, and optimize channel distribution dynamically to satisfy the features of topology changing and traffic frequent fluctuation during network running. The simulation results show that the new protocol outperforms others in terms of network throughput, end-to-end delay, routing overhead, and network lifetime.展开更多
Multi-channel cylindrical applicators for high dose-rate (HDR) brachytherapy are utilized mainly for special gynecology cases often involving image-guidance high dose-rate (IG-HDR or IGBT) brachytherapy. In these case...Multi-channel cylindrical applicators for high dose-rate (HDR) brachytherapy are utilized mainly for special gynecology cases often involving image-guidance high dose-rate (IG-HDR or IGBT) brachytherapy. In these cases, doses are prescribed to partial vaginal wall/depth where the disease is indicated by an MRI study scanned on the same day. These novel IG-HDR procedures are logistical challenges comparing to typical HDR out-patient treatments due to the complexity of planning for asymmetrical prescriptions as well as the extension of the whole procedure. Indeed the main advantages of HDR over LDR brachytherapy would be significantly weaken unless the IG-HDR procedures become more efficient in time, thus timely treatment planning becomes crucial. Based on our clinical experience, we propose the pseudo central-catheter method to reduce errors, to minimize uncertainty and to ensure efficiency. In this method, the central hollow path of the multi-channel cylindrical applicator is digitized into a pseudo catheter similar to other active catheters, and the asymmetrical prescription points could be generated corresponding to the pseudo dwelling points in the pseudo central-catheter. The pseudo dwelling points are later deleted after generating the prescription point arrays. This method is robust with minimal chance of errors or uncertainties, and demonstrates high efficiency with much less chance of uncertainty, which is significant for IG-HDR brachytherapy procedures utilizing multi-channel applicators.展开更多
Near-infrared (NIR) spectrometer based on semiconductor lasers can combine light source and splitter into one, which is an important direction for development of miniature instruments. In order to avoid random interfe...Near-infrared (NIR) spectrometer based on semiconductor lasers can combine light source and splitter into one, which is an important direction for development of miniature instruments. In order to avoid random interference caused by inconsistency between light sources, the novel evaluation indicators for global stability of multi-channels spectral system were proposed based on the correlation between dynamic deviation spectra of any two channels. The NIR analysis of moisture for corn powder samples based on the partial least squares combined with Savitzky-Golay (SG) smoothing was taken as an example, and a spectral correction method for enhancing prediction performance of multi-channels spectral system was further provided using above evaluation indicators. The experiment results showed that the global stability evaluation indicators significantly increased after SG smoothing correction. Meanwhile, the root-mean-square errors of prediction for corn moisture reduced from 0.373 to 0.283 (%), and the correlation coefficient between predicted and actual values was improved from 0.702 to 0.855. The above results indicated that by improving global stability indicators, the prediction ability of multi-channels spectral system can be improved. The proposed method provided a valuable reference for designing multi-channels diminutive spectrometer with high prediction performance, which had significance for large-scale application of NIR technology.展开更多
文摘Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC semiconductor device,an instrumentation amplifier(IA),two resistors,and a diode for disconnection detection.Based on the basic circuit,a multi-channel interface circuit was also implemented.The CJC was implemented using compensation semiconductor and IA,and disconnection detection was detected by using two resistors and a diode so that IA input voltage became-0.42 V.As a result of the experiment using R-type TC,the error of the designed circuit was reduced from 0.14 mV to 3μV after CJC in the temperature range of 0°C to 1400°C.In addition,it was confirmed that the output voltage of IA was saturated from 88 mV to-14.2 V when TC was disconnected from normal.The output voltage of the designed circuit was 0 V to 10 V in the temperature range of 0°C to 1400°C.The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel.The implemented multi-channel interface has a feature that can be applied equally to E,J,K,T,R,and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.
基金Project supported by the National Natural Science Foundation of China (Grant No.62271460)the Zhejiang Key Research and Development Project,China (Grant Nos.2021C03153 and 2022C03166)。
文摘Most of existing metasurfaces usually have limited channel behavior,which seriouslyhinders their development and application.In this paper,we propose a multi-channel terahertz focused beam generator based on shared-aperture metasurface,and the generator consists of a top square metal strip,a middle layer of silica and a metal bottom plate.By changing the position and size of the shared-aperture array,the designed metasurface can generate any number of multi-channel focusing beams at different predicted positions.In addition,the energy intensity of focusing beams can be controlled.The full-wave simulation results show that the metasurface achieves four-channel vortex focused beam generation with different topological charges,and five-,six-,eight-channel focused beam generation with different energy intensities at a frequency of 1 THz,which are in good agreement with the theoretically calculated predictions.This work can provide a new idea for designing the terahertz multichannel devices.
基金We would like to acknowledge the sponsorship of the National Natural Science Foundation of China(42004092,42030103,41974119)Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(Grant No.2021QNLM020001-6)Young Elite Scientists Sponsorship Program by CAST(2021QNRC001).
文摘Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex structure or reflection features, the existing multi-channel inversion methods have to adopt the highly time-consuming strategy of arranging seismic data trace-by-trace, limiting its wide application in pre-stack inversion. A fast pre-stack multi-channel inversion constrained by seismic reflection features has been proposed to address this issue. The key to our method is to re-characterize the reflection features to directly constrain the pre-stack inversion through a Hadamard product operator without rearranging the seismic data. The seismic reflection features can reflect the distribution of the stratum reflection interface, and we obtained them from the post-stack profile by searching the shortest local Euclidean distance between adjacent seismic traces. Instead of directly constructing a large-size reflection features constraint operator advocated by the conventional methods, through decomposing the reflection features along the vertical and horizontal direction at a particular sampling point, we have constructed a computationally well-behaved constraint operator represented by the vertical and horizontal partial derivatives. Based on the Alternating Direction Method of Multipliers (ADMM) optimization, we have derived a fast algorithm for solving the objective function, including Hadamard product operators. Compared with the conventional reflection features constrained inversion, the proposed method is more efficient and accurate, proved on the Overthrust model and a field data set.
文摘Due to the scattered nature of the network,data transmission in a dis-tributed Mobile Ad-hoc Network(MANET)consumes more energy resources(ER)than in a centralized network,resulting in a shorter network lifespan(NL).As a result,we build an Enhanced Opportunistic Routing(EORP)protocol architecture in order to address the issues raised before.This proposed routing protocol goal is to manage the routing cost by employing power,load,and delay to manage the routing energy consumption based on theflooding of control pack-ets from the target node.According to the goal of the proposed protocol techni-que,it is possible to manage the routing cost by applying power,load,and delay.The proposed technique also manage the routing energy consumption based on theflooding of control packets from the destination node in order to reduce the routing cost.Control packet exchange between the target and all the nodes,on the other hand,is capable of having an influence on the overall efficiency of the system.The EORP protocol and the Multi-channel Cooperative Neighbour Discovery(MCCND)protocol have been designed to detect the cooperative adja-cent nodes for each node in the routing route as part of the routing path discovery process,which occurs during control packet transmission.While control packet transmission is taking place during the routing path discovery process,the EORP protocol and the Multi-channel Cooperative Neighbour Discovery(MCCND)protocol have been designed to detect the cooperative adjacent nodes for each node in the routing.Also included is a simulation of these protocols in order to evaluate their performance across a wide range of packet speeds using Constant Bit Rate(CBR).When the packet rate of the CBR is 20 packets per second,the results reveal that the EORP-MCCND is 0.6 s quicker than the state-of-the-art protocols,according to thefindings.Assuming that the CBR packet rate is 20 packets per second,the EORP-MCCND achieves 0.6 s of End 2 End Delay,0.05 s of Routing Overhead Delay,120 s of Network Lifetime,and 20 J of Energy Consumption efficiency,which is much better than that of the state-of-the-art protocols.
文摘为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达到网络信道冲突图的最大值。文章通过对无冲突信道算法的运用,最终证实其可以有效地提高传感器网络的工作效率,大幅度提升网络的吞吐量。
基金supported by the National Natural Science Foundation of China(Nos.11375195,11375263,and 11105143)the project of National Magnetic Confinement Fusion Energy Development Research(No.2013GB104003)
文摘A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pulse amplitude analyzer(TSMCA).A dual-port random access memory is divided into two storage spaces,one for current energy spectrum data acquisition and another for previous energy spectrum data storage.The two tasks can be performed simultaneously,and the time-related variation tendency of energy spectrum can be obtained.A prototype system of TSMCA is designed.It performs nicely,with maximum channel number of 4096 in capacity of 2^(32)/Ch,minimal time-sharing slice of 25 ms,the differential nonlinearity of <1.5%,and the integral nonlinearity of <0.3%.
基金supported by the National Key R&D Pro-gram of China under Grant 2016YFB0402501in part by the Natural Science Foundation of China under grant 61605112Open Fund of IPOC under grant BUPT
文摘We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ～7-ms tuning time and ～27-dB extinction ratio.
基金supported by National Natural Science Foundation of China(61473134,61573220)the Postdoctoral Science Foundation of China(2017M622231)
文摘This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation technique and the linear unbiased estimation method. The estimation gains are developed by solving a set of Riccati equations, and a stability result about the state estimation is shown. Finally, an example is given to illustrate the efficiency of the receding horizon state estimation.
基金The Open Foundation of Laboratory of Marine Ecosystem and Biogeochemistry,SOA under contract No.LMEB201701
文摘There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-channel chemical sensor to detect such anomalies which can be used in deep-sea at depths of more than 4 000 m. The design allowed five all-solid-state electrodes to be mounted on it and each (apart from one reference electrode) could be changed according to chemicals to be measured. Two experiments were conducted using the chemical sensors. The first was a shallow-sea trial which included sample measurements and in situ monitoring. pH, Eh, CO3^2- and SO4^2- electrodes were utilized to demonstrate that the chemical sensor was accurate and stable outside the laboratory. In the second experiment, the chemical sensor was integrated with pH, Eh, CO3^2- and H2S electrodes, and was used in 29 scans of the seabed along the Southwest Indian Ridge (SWIR) to detect hydrothermal vents, from which 27 sets of valid data were obtained. Hydrothermal vents were identified by analyzing the chemical anomalies, the primary judging criteria were decreasing voltages of Eh and H2S, matched by increasing voltages of pH and CO3^2- . We proposed that simultaneous detection of changes in these parameters will indicate a hydrothermal vent. Amongst the 27 valid sets of data, five potential hydrothermal vents were targeted using the proposed method. We suggest that our sensors could be widely employed by marine scientists.
基金supported by the National High-Tech.R&D Program of China(the National 863 plans projects,Grant No.2007AA03Z352)
文摘Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP).By computation,the velocity fields of both the gas and the solid phases were simulated and the track of the solid phase was analyzed in detail.It can be found that the velocities of the two phases are able to reach an ultrasonic level;meanwhile,the dispersion width of the solid phase at the nozzle exit is less than that of the gas phase.When particle diameters are less than 5 μm,there is a decreasing trend in the dispersion width of the solid phase with an increase in particle diameters.The trend becomes stable as the particle diameters are greater than 5 μm;in the meantime,the distribution of solid particles is near the axis of the jet flow.The optimal standoff distance between the nozzle and the substrate in the process of USPP is about 120 mm.Simulation results can help improve the design of mass-production-oriented multi-channel nozzles for SNC induced by USPP.
基金This work was supported by the National Natural Science Foundation of China, Grant No. 10035020
文摘A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown
基金The work was supported by National Natural Science Foundation of China(61271149)and by Beijing Natural Science Foundation(4144093)
文摘High-speed real-time digital frequency analysis is one major field of Fast Fourier Transform(FFT)application,such as Synthetic Aperture Radar(SAR)processing and medical imaging.In SAR processing,the image size could be 4 k×4 k in normal and it has become larger over the years.In the view of real-time,extensibility and reusable characteristics,an Field Programmable Gate Array(FPGA)based multi-channel variable-length FFT architecture which adopts radix-2 butterfly algorithm is proposed in this paper.The hardware implementation of FFT is partially reconfigurable architecture.Firstly,the proposed architecture in the paper has flexibility in terms of chip area,speed,resource utilization and power consumption.Secondly,the proposed architecture combines serial and parallel methods in its butterfly computations.Furthermore,on system-level issue,the proposed architecture takes advantage of state processing in serial mode and data processing in parallel mode.In case of sufficient FPGA resources,state processing of serial mode mentioned above is converted to pipeline mode.State processing of pipeline mode achieves high throughput.
文摘Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep stages using multi-biological signals such as electroencephalography(EEG),electrocardiogram(ECG),electromyogram(EMG),and electrooculogram(EOG).Most of the prior studies in sleep stage classification focus on hand-crafted feature extraction methods.Traditional hand-crafted feature extraction methods choose features manually from raw data,which is tedious,and these features are limited in their ability to balance efficiency and accuracy.Moreover,most of the existing works on sleep staging are either single channel(a single-lead EEG may not contain enough information)or only EEG signal based which can not reveal more complicated physical features for reliable classification of various sleep stages.This study proposes an approach to combine Convolutional Neural Networks(CNNs)and Gated Recurrent Units(GRUs)that can discover hidden features from multi-biological signal data to recognize the different sleep stages efficiently.In the proposed scheme,the CNN is designed to extract concealed features from the multi-biological signals,and the GRU is employed to automatically learn the transition rules among different sleep stages.After that,the softmax layers are used to classify various sleep stages.The proposed method was tested on two publicly available databases:Sleep Heart Health Study(SHHS)and St.Vincent’s University Hospital/University College Dublin Sleep Apnoea(UCDDB).The experimental results reveal that the proposed model yields better performance compared to state-of-the-art works.Our proposed scheme will assist in building a new system to deal with multi-channel or multi-modal signal processing tasks in various applications.
基金supported by National Key Technology Research and Development Program of China under Grant No.2015BAH08F01the joint fund of the Ministry of Education of People's Republic of China and China Mobile Communications Corporation under Grant No.MCM20160304
文摘Multi-channel can be used to provide higher transmission ability to the bandwidth-intensive and delay-sensitive real-time streams. However, traditional channel capacity theories and coding schemes are seldom designed for the real-time streams with strict delay constraint, especially in multi-channel context. This paper considers a real-time stream system, where real-time messages with different importance should be transmitted through several packet erasure channels, and be decoded by the receiver within a fixed delay. Based on window erasure channels and i.i.d.(identically and independently distributed) erasure channels, we derive the Multi-channel Real-time Stream Transmission(MRST) capacity models for Symmetric Real-time(SR) streams and Asymmetric Real-time(AR) streams respectively. Moreover, for window erasures, a Maximum Equilibrium Intra-session Code(MEIC) is presented for SR and AR streams, and is shown able to asymptotically achieve the theoretical MRST capacity. For i.i.d. erasures, we propose an Adaptive Maximum Equilibrium Intra-session Code(AMEIC), and then prove AMEIC can closely approach the MRST transmission capacity. Finally, the performances of the proposed codes are verified by simulations.
基金Project supported by the National Key Basic Research Program of China (2001CB610406), the National Natural Science Foundation of China (10474072, 50477048), and the Shanghai Science and Technology Committee
文摘A multi-channeled filter based on branchy defect in a microstrip photonic crystal was proposed. By introducing a branchy structure across the defect region, multiple defect modes will appear inside the photonic gap, leading to the multi-channeled filtering phenomenon. In comparison with the conventional multi-channeled filters, the proposed structure is more compact and tunable as far as the device volume and fabrication are concerned. The microwave experiment results are found in agreement with simulation results.
基金support of the National Natural Science Key Foundation of China(Grant Nos.91958206,91858215)the Key Research and Development Program of Shandong(Grant No.2019GHY112019)+2 种基金the China Sponsorship Council(Grant No.201806335026)the Opening Foundation of Key Lab of Submarine Geosciences and Prospecting Techniques,MOE,Ocean University of China(Grant No.SGPT-20210F-06)the Fundamental Research Funds for the Central Universities(Grant No.202161013)。
文摘The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data accuracy from seismic data.In this work,a case study was carried out in the Baima area of Wulong,in order to develop a workflow for accurately predicting shale gas formation pressure.The multi-channel stack method was first used,as well as the inversion of single-channel seismic data,to construct velocity and density models of the formation.Combined with the existing welllogging data,the velocity and density models of the whole well section were established.The shale gas formation pressure was then estimated using the Eaton method.The results show that the multi-channel seismic stacking method has a higher accuracy than the inversion of the formation velocity obtained by the single-channel seismic method.The discrepancies between our predicted formation pressure and the actual formation pressure measurement are within an acceptable range,indicating that our workflow is effective.
文摘Wireless Sensor Networks(WSNs)can be termed as an autoconfigured and infrastructure-less wireless networks to monitor physical or environmental conditions,such as temperature,sound,vibration,pressure and motion etc.WSNs may comprise thousands of Internet of Things(IoT)devices to sense and collect data from its surrounding,process the data and take an automated and mechanized decision.On the other side the proliferation of these devices will soon cause radio spectrum shortage.So,to facilitate these networks,we integrate Cognitive Radio(CR)functionality in these networks.CR can sense the unutilized spectrum of licensed users and then use these empty bands when required.In order to keep the IoT nodes functional all time,continuous energy is required.For this reason the energy harvested techniques are preferred in IoT networks.Mainly it is preferred to harvest Radio Frequency(RF)energy in the network.In this paper a region based multi-channel architecture is proposed.In which the coverage area of primary node is divided as Energy Harvesting Region and Communication Region.The Secondary User(SU)that are the licensed user is IoT enabled with Cognitive Radio(CR)techniques so we call it CR-enabled IoT node/device and is encouraged to harvest energy by utilizing radio frequency energy.To harvest energy efficiently and to reduce the energy consumption during sensing,the concept of overlapping region is given that supports to sense multiple channels simultaneously and help the SU to find best channel for transmitting data or to harvest energy from the ideal channel.From the experimental analysis,it is proved that SU can harvest more energy in overlapping region and this architecture proves to consume less energy during data transmission as compared to single channel.We also show that channel load can be highly reduced and channel utilization is proved to be more proficient.Thus,this proves the proposed architecture cost-effective and energy-efficient.
基金Supported by the National Natural Science Foundation of China (No. 60873195, No. 61070220)the Research Fund for the Doctoral Program of Higher Education of China (No. 20090111110002)
文摘Improving capacity and reducing delay are the most challenging topics in wireless ad hoc networks. Nodes that equip multiple radios working on different channels simultaneously permit ef-fective utility of frequency spectrum and can also reduce interference. In this paper, after analyzing several current protocols in Multi-Radio Multi-Channel (MR-MC) ad hoc networks, a new multi-channel routing metric called Integrative Route Metric (IRM) is designed. It takes channel load, inter-flow, and intra-flow interference into consideration. In addition, an MR-MC routing protocol based on Interference-Aware and Channel-Load (MR-IACL) is also presented. The MR-IACL can assign channels and routings for nodes according to channel load and interference degree of links, and optimize channel distribution dynamically to satisfy the features of topology changing and traffic frequent fluctuation during network running. The simulation results show that the new protocol outperforms others in terms of network throughput, end-to-end delay, routing overhead, and network lifetime.
文摘Multi-channel cylindrical applicators for high dose-rate (HDR) brachytherapy are utilized mainly for special gynecology cases often involving image-guidance high dose-rate (IG-HDR or IGBT) brachytherapy. In these cases, doses are prescribed to partial vaginal wall/depth where the disease is indicated by an MRI study scanned on the same day. These novel IG-HDR procedures are logistical challenges comparing to typical HDR out-patient treatments due to the complexity of planning for asymmetrical prescriptions as well as the extension of the whole procedure. Indeed the main advantages of HDR over LDR brachytherapy would be significantly weaken unless the IG-HDR procedures become more efficient in time, thus timely treatment planning becomes crucial. Based on our clinical experience, we propose the pseudo central-catheter method to reduce errors, to minimize uncertainty and to ensure efficiency. In this method, the central hollow path of the multi-channel cylindrical applicator is digitized into a pseudo catheter similar to other active catheters, and the asymmetrical prescription points could be generated corresponding to the pseudo dwelling points in the pseudo central-catheter. The pseudo dwelling points are later deleted after generating the prescription point arrays. This method is robust with minimal chance of errors or uncertainties, and demonstrates high efficiency with much less chance of uncertainty, which is significant for IG-HDR brachytherapy procedures utilizing multi-channel applicators.
文摘Near-infrared (NIR) spectrometer based on semiconductor lasers can combine light source and splitter into one, which is an important direction for development of miniature instruments. In order to avoid random interference caused by inconsistency between light sources, the novel evaluation indicators for global stability of multi-channels spectral system were proposed based on the correlation between dynamic deviation spectra of any two channels. The NIR analysis of moisture for corn powder samples based on the partial least squares combined with Savitzky-Golay (SG) smoothing was taken as an example, and a spectral correction method for enhancing prediction performance of multi-channels spectral system was further provided using above evaluation indicators. The experiment results showed that the global stability evaluation indicators significantly increased after SG smoothing correction. Meanwhile, the root-mean-square errors of prediction for corn moisture reduced from 0.373 to 0.283 (%), and the correlation coefficient between predicted and actual values was improved from 0.702 to 0.855. The above results indicated that by improving global stability indicators, the prediction ability of multi-channels spectral system can be improved. The proposed method provided a valuable reference for designing multi-channels diminutive spectrometer with high prediction performance, which had significance for large-scale application of NIR technology.
