This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were ...This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.展开更多
Extracellular vesicles(EVs)have recently attracted significant research attention owing to their important biological functions,including cell-to-cell communication.EVs are a type of membrane vesicles that are secrete...Extracellular vesicles(EVs)have recently attracted significant research attention owing to their important biological functions,including cell-to-cell communication.EVs are a type of membrane vesicles that are secreted into the extracellular space by most types of cells.Several biological biomolecules found in EVs,such as proteins,microRNA,and DNA,are closely related to the pathogenesis of human malignancies,making EVs valuable biomarkers for disease diagnosis,treatment,and prognosis.Therefore,EV separation and detection are prerequisites for providing important information for clinical research.Conventional separation methods suffer from low levels of purity,as well as the need for cumbersome and prolonged operations.Moreover,detection methods require trained operators and present challenges such as high operational expenses and low sensitivity and specificity.In the past decade,platforms for EV separation and detection based on nanostructures have emerged.This article reviews recent advances in nanostructure-based EV separation and detection techniques.First,nanostructures based on membranes,nanowires,nanoscale deterministic lateral displacement,and surface modification are presented.Second,high-throughput separation of EVs based on nanostructures combined with acoustic and electric fields is described.Third,techniques combining nanostructures with immunofluorescence,surface plasmon resonance,surface-enhanced Raman scattering,electrochemical detection,or piezoelectric sensors for high-precision EV analysis are summarized.Finally,the potential of nanostructures to detect individual EVs is explored,with the aim of providing insights into the further development of nanostructure-based EV separation and detection techniques.展开更多
Artificial cells are constructed from synthetic materials to imitate the biological functions of natural cells.By virtue of nanoengineering techniques,artificial cells with designed biomimetic functions provide altern...Artificial cells are constructed from synthetic materials to imitate the biological functions of natural cells.By virtue of nanoengineering techniques,artificial cells with designed biomimetic functions provide alternatives to natural cells,showing vast potential for biomedical applications.Especially in cancer treatment,the deficiency of immunoactive macrophages results in tumor progression and immune resistance.To overcome the limitation,a BaSO_(4)@ZIF-8/transferrin(TRF)nanomacrophage(NMΦ)is herein constructed as an alternative to immunoactive macrophages.Alike to natural immunoactive macrophages,NMΦis stably retained in tumors through the specific affinity of TRF to tumor cells.Zn^(2+)as an“artificial cytokine”is then released from the ZIF-8 layer of NMΦunder tumor microenvironment.Similar as proinflammatory cytokines,Zn^(2+)can trigger cell anoikis to expose tumor antigens,which are selectively captured by the BaSO_(4)cavities.Therefore,the hierarchical nanostructure of NMΦs allows them to mediate immunogenic death of tumor cells and subsequent antigen capture for T cell activation to fabricate long-term antitumor immunity.As a proof-of-concept,the NMΦmimics the biological functions of macrophage,including tumor residence,cytokine release,antigen capture and immune activation,which is hopeful to provide a paradigm for the design and biomedical applications of artificial cells.展开更多
Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose t...Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose that the 1D CrN nanostructure is a FM half-metal,which can generate the fully spin-polarized current.The ab initio molecular dynamic simulation and the phonon spectrum calculation demonstrate that the 1D CrN nanostructure is thermodynamically stable.The partially occupied Cr-d orbitals endow the nanostructure with FM half-metallicity,in which the half-metallic gap(?s)reaches up to 1.58 eV.The ferromagnetism in the nanostructure is attributed to the superexchange interaction between the magnetic Cr atoms,and a sizable magnetocrystalline anisotropy energy(MAE)is obtained.Moreover,the transverse stretching of nanostructure can effectively modulate?s and MAE,accompanied by the preservation of half-metallicity.A nanocable is designed by encapsulating the CrN nanostructure with a BN nanotube,and the intriguing magnetic and electronic properties of the nanostructure are retained.These novel characteristics render the 1D CrN nanostructure as a compelling candidate for exploiting high-performance spintronic devices.展开更多
Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality.However,it is limited by the high overpotential of oxygen evolution react...Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality.However,it is limited by the high overpotential of oxygen evolution reaction(OER)at the anode.To reduce the operating voltage of electrolyzer,herein thermodynamically favorable glycerol oxidation reaction(GOR)is proposed to replace the OER.Moreover,vertical Ni O flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution,respectively.Meanwhile,excluding the explosion risk of mixed H_2/O_(2),a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer.Impressively,the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV,and exhibits good long-term stability.This work provides a new paradigm of hydrogen production with low cost and good feasibility.展开更多
The lightness and high strength-to-weight ratio of the magnesium alloy have attracted more interest in various applications.However,micro/nanostructure generation on their surfaces remains a challenge due to the flamm...The lightness and high strength-to-weight ratio of the magnesium alloy have attracted more interest in various applications.However,micro/nanostructure generation on their surfaces remains a challenge due to the flammability and ignition.Motivated by this,this study proposed a machining process,named the ultraprecision diamond surface texturing process,to machine the micro/nanostructures on magnesium alloy surfaces.Experimental results showed the various microstructures and sawtooth-shaped nanostructures were successfully generated on the AZ31B magnesium alloy surfaces,demonstrating the effectiveness of this proposed machining process.Furthermore,sawtooth-shaped nanostructures had the function of inducing the optical effect and generating different colors on workpiece surfaces.The colorful letter and colorful flower image were clearly viewed on magnesium alloy surfaces.The corresponding cutting force,chip morphology,and tool wear were systematically investigated to understand the machining mechanism of micro/nanostructures on magnesium alloy surfaces.The proposed machining process can further improve the performances of the magnesium alloy and extend its functions to other fields,such as optics.展开更多
The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron tr...The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron transport layer for bismuth vanadate(BiVO_(4))with a short charge diffusion length.In_(2)O_(3)NRs reinforce the electron transport and hole blocking of BiVO_(4),surpassing the state-of-the-art photoelectrochemical performances of BiVO_(4)-based photoanodes.Also,a tannin-nickel-iron complex(TANF)is used as an oxygen evolution catalyst to speed up the reaction kinetics.The final TANF/BiVO_(4)/In_(2)O_(3)NR photoanode generates photocurrent densities of 7.1 mAcm^(−2) in sulfite oxidation and 4.2 mA cm^(−2) in water oxidation at 1.23 V versus the reversible hydrogen electrode.Furthermore,the“artificial leaf,”which is a tandem cell with a perovskite/silicon solar cell,shows a solar-to-hydrogen conversion efficiency of 6.2%for unbiased solar water splitting.We reveal significant advances in the photoactivity of TANF/BiVO_(4)/In_(2)O_(3)NRs from the tailored nanostructure and band structure for charge dynamics.展开更多
The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs)...The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.展开更多
A fiberform nanostructure was synthesized by exposing high-density helium plasma to a 100 nm thick tungsten thin film in the linear plasma device NAGDIS-II.After helium plasma exposure,the cross-section of samples was...A fiberform nanostructure was synthesized by exposing high-density helium plasma to a 100 nm thick tungsten thin film in the linear plasma device NAGDIS-II.After helium plasma exposure,the cross-section of samples was observed by a scanning electron microscope,transmission electron microscope,and focused ion beam scanning electron microscope.It is shown that the thickness of the nanostructured layer increases significantly for only a short irradiation time.The optical absorptivity remains high,even though it is exposed to helium plasma for a short time.The usage of the thin film can shorten the processing time for nanostructure growth,which will be beneficial for commercial production.展开更多
Electrically conductive elastomer composites(CECs)with segregated networks of conductive nanofillers show high potential in stretchable strain sensors due to balanced mechanical and electrical properties,yet the sensi...Electrically conductive elastomer composites(CECs)with segregated networks of conductive nanofillers show high potential in stretchable strain sensors due to balanced mechanical and electrical properties,yet the sensitivity at low strain is generally insufficient for practical application.Herein,we report an easy and effective way to improve the resistive response to low strain for CECs with segregated network structure via adding stiff alumina into carbon nanostructures(CNS).The CEC containing 0.7 wt%CNS and 5 wt%Al_(2)O_(3) almost sustains the same elasticity(elongation at break of~900%)and conductivity(0.8 S/m)as the control,while the piezoresistive sensitivity is significantly improved.Thermoplastic polyurethane(TPU)composites with a segregated network of hybrid nanofillers(CNS and Al_(2)O_(3))show much higher strain sensitivity(Gauge factor,GF-566)at low strain(45%strain)due to a local stress concentration effect,this sensitivity is superior to that of TPU/CNS composites(GF-11).Such a local stress concentration effect depends on alumina content and its distribution at the TPU particle interface.In addition,CECs with hybrid fillers show better reproducibility in cyclic piezoresistive behavior testing than the control.This work offers an easy method for fabricating CECs with a segregated filler network offering stretchable strain sensors with a high strain sensitivity.展开更多
Surface morphological features and nanostructures generated during SiC graphitization process can significantly affect fabrication of high-quality epitaxial graphene on semiconductor substrates.In this work,we investi...Surface morphological features and nanostructures generated during SiC graphitization process can significantly affect fabrication of high-quality epitaxial graphene on semiconductor substrates.In this work,we investigate the surface morphologies and atomic structures during graphitization process of 4H-SiC(0001) using scanning tunneling microscopy.Our high-magnified scanning-tunneling-microscope images exhibit the appearance and gradual developments of SiC(1 × 1)nanostructures after 1100℃ cleaning treatments,irregularly distributed among carbon nanocaps and(√3×√3) reconstruction domains.A model for the formation and growth progression of SiC(1 × 1) nanostructures has been proposed.When post-annealing temperature reaches 1300 ℃,the nanoholes and nanoislands can be observed on the surface,and multilayer graphene is often detected lying on the top surface of those nanoislands.These results provide profound insights into the complex evolution process of surface morphology during SiC thermal decomposition and will shed light on fabrication of SiC nanostructures and graphene nanoflakes.展开更多
Microwave irradiation is considered an important approach to Green Chemistry, because of its ability to rapidly increase the internal temperature of polar-organic compounds that lead to synthesis times of minutes rath...Microwave irradiation is considered an important approach to Green Chemistry, because of its ability to rapidly increase the internal temperature of polar-organic compounds that lead to synthesis times of minutes rather than hours when compared to conventional thermal heating. This works describes a dual allometry test for the discrimination between the solvents and reagents used in the microwave-assisted synthesis of transition metal (zinc oxide, palladium silver, platinum, and gold) nanostructures. The test is performed in log-log process energy phase-space projection, where the synthesis data (kJ against kJ·mol<sup>-1</sup>) has a power-law signature. The test is shown to discriminate between recommended Green Chemistry, problematic Green Chemistry, and Green Chemistry hazardous solvents. Typically, recommended Green chemistry exhibits a broad y-axes distribution within an upper exponent = 1 and lower exponent = 0.5. Problematic Green Chemistry exhibits a y-axes narrower distribution with an upper exponent = 0.94 and lower exponent = 0.64. Non-Green Chemistry hazardous data exhibits a further narrowing of the y-axes distribution within upper exponent = 0.87 and lower exponent = 0.66. In all three cases, the y-axes is aligned to original database power-law signature. It is also shown that in the x-axes direction (process energy budget) the grouped order of magnitude decreases from four orders for recommended Green Chemistry solvent and reagent data, through two orders for non-Green Chemistry hazardous material and down to one order for problematic Green Chemistry.展开更多
Human civilization has been relentlessly inspired by the nurturing lessons;nature is teaching us.From birds to airplanes and bullet trains,nature gave us a lot of perspective in aiding the progress and development of ...Human civilization has been relentlessly inspired by the nurturing lessons;nature is teaching us.From birds to airplanes and bullet trains,nature gave us a lot of perspective in aiding the progress and development of countless industries,inventions,transportation,and many more.Not only that nature inspired us in such technological advances but also,nature stimulated the advancement of micro-and nanostructures.Nature-inspired nanoarchitectures have been consid-ered a favorable structure in electrode materials for a wide range of applications.It offers various positive attributes,especially in energy storage applications,such as the formation of hierarchical two-dimen-sional and three-dimensional interconnected networked structures that benefit the electrodes in terms of high surface area,high porosity and rich surface textural features,and eventually,delivering high capacity and outstanding overall material stability.In this review,we compre-hensively assessed and compiled the recent advances in various nature-inspired based on animal-and human-inspired nanostructures used for supercapacitors.This comprehensive review will help researchers to accommodate nature-inspired nanostructures in industrializing energy storage and many other applications.展开更多
Chirality is ubiquitous in natural world.Although with similar physical and chemical properties,chiral enantiomers could play different roles in biochemical processes.Discrimination of chiral enantiomers is extremely ...Chirality is ubiquitous in natural world.Although with similar physical and chemical properties,chiral enantiomers could play different roles in biochemical processes.Discrimination of chiral enantiomers is extremely important in biochemical,analytical chemistry,and pharmaceutical industries.Conventional chiroptical spectroscopic methods are disadvantageous at a limited detection sensitivity because of the weak signals of natural chiral molecules.Recently,superchiral fields were proposed to effectively enhance the interaction between light and molecules,allowing for ultrasensitive chiral detection.Intensive theoretical and experimental works have been devoted to generation of superchiral fields based on artificial nanostructures and their application in ultrasensitive chiral sensing.In this review,we present a survey on these works.We begin with the introduction of chiral properties of electromagnetic fields.Then,the optical chirality enhancement and ultrasensitive chiral detection based on chiral and achiral nanostructures are discussed respectively.Finally,we give a short summary and a perspective for the future ultrasensitive chiral sensing.展开更多
Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by t...Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by the simple variation of applied voltage from 2-6 V between the electrodes. Lead sheet was used as an anode and platinum sheet served as a cathode. Anodic oxidation at 2 V resulted in the variable edge sized（1-2 μm） hexagon-like structures in the electrolyte. When the applied potential was increased to 4 V a structure of distorted hexagons consisting of some flower-like structures were obtained. Further increment of potential up to 6 V resulted in flower like structures of α-PbO2 having six petals. The diameter of the flower-like structures was 200-500 nm and the size of a petal was 100-200 nm.展开更多
Bearings are the most important component of nearly all mechanical equipment, as they guarantee the steady running of the equipment, which is especially important for high-end equipment such as highspeed trains and sh...Bearings are the most important component of nearly all mechanical equipment, as they guarantee the steady running of the equipment, which is especially important for high-end equipment such as highspeed trains and shield tunneling machines. Requirements regarding the quality of bearings are increasing with the rapid development in technology. A country’s bearings manufacturing level directly reflects the level of that country’s steel metallurgy and machinery manufacturing. The performance of the bearing steel is the critical factor that determines the quality of a bearing. The development of new bearing steel with higher performance is the ambition of material researchers and the expectation of the manufacturing industry. Many famous bearing manufacturing enterprises are competing to develop the new generation of bearing steel. Nanostructured bainitic bearing steel (NBBS), which is a newly developed bearing steel, not only possesses high strength and toughness, but also exhibits excellent wear resistance and rolling contact fatigue (RCF) resistance. In recent years, relevant achievements in NBBS in China have led to significant progress in this field. NBBS was first used in China to manufacture large bearings for wind turbines and heavy-duty bearings, with excellent performance. As a result, NBBS and its corresponding heat-treatment process have been included in the national and industry standards for the first time. The bearing industry considers the exploitation of NBBS to be epoch-making, and has termed this kind of bearing as the second generation of bainitic bearing. In this paper, the development of NBBS is reviewed in detail, including its advantages and disadvantages. Further research directions for NBBS are also proposed.展开更多
Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient ...Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient and effective energy conversion and storage. The booming development of nanotechnology affords emerging but effective tools in designing advanced energy material. We reviewed the significant progress and dominated nanostructured energy materials in electrochemical energy conversion and storage devices, including lithium ion batteries, lithium–sulfur batteries, lithium–oxygen batteries, lithium metal batteries, and supercapacitors. The use of nanostructured electrocatalyst for effective electrocatalysis in oxygen reduction and oxygen evolution reactions for fuel cells and metal–air batteries was also included. The challenges in the undesirable side reactions between electrolytes and electrode due to high electrode/electrolyte contact area, low volumetric energy density of electrode owing to low tap density,and uniform production of complex energy materials in working devices should be overcome to fully demonstrate the advanced energy nanostructures for electrochemical energy conversion and storage. The energy chemistry at the interfaces of nanostructured electrode/electrolyte is highly expected to guide the rational design and full demonstration of energy materials in a working device.展开更多
Investigations were made on the phase evolution and thermal stability of the 90W 7Ni 3Fe(mass fraction, %) milled powders by means of XRD and DTA. The results showed that ball milling produced an ultrafine composite p...Investigations were made on the phase evolution and thermal stability of the 90W 7Ni 3Fe(mass fraction, %) milled powders by means of XRD and DTA. The results showed that ball milling produced an ultrafine composite powder consisting of supersolidus solution W(Ni, Fe) and amorphous phase, owing to the fast diffusion rate induced by high density of lattice defects and nanograin boundaries. The amorphous phase results from the extension of the solubility of W in γ (Ni, Fe) phase which forms during the first 3 h of ball milling.展开更多
Because of the interesting and multifunctional properties,recently,ZnO nanostructures are considered as excellent material for fabrication of highly sensitive and selective gas sensors.Thus,ZnO nanomaterials are widel...Because of the interesting and multifunctional properties,recently,ZnO nanostructures are considered as excellent material for fabrication of highly sensitive and selective gas sensors.Thus,ZnO nanomaterials are widely used to fabricate efficient gas sensors for the detection of various hazardous and toxic gases.The presented review article is focusing on the recent developments of NO2gas sensors based on ZnO nanomaterials.The review presents the general introduction of some metal oxide nanomaterials for gas sensing application and finally focusing on the structure of ZnO and its gas sensing mechanisms.Basic gas sensing characteristics such as gas response,response time,recovery time,selectivity,detection limit,stability and recyclability,etc are also discussed in this article.Further,the utilization of various ZnO nanomaterials such as nanorods,nanowires,nano-micro flowers,quantum dots,thin films and nanosheets,etc for the fabrication of NO2gas sensors are also presented.Moreover,various factors such as NO2concentrations,annealing temperature,ZnO morphologies and particle sizes,relative humidity,operating temperatures which are affecting the NO2gas sensing properties are discussed in this review.Finally,the review article is concluded and future directions are presented.展开更多
Visible-light-responsive ternary metal tungstate(MWO_4) photocatalysts are being increasingly investigated for energy conversion and environmental purification applications owing to their striking features, including ...Visible-light-responsive ternary metal tungstate(MWO_4) photocatalysts are being increasingly investigated for energy conversion and environmental purification applications owing to their striking features, including low cost,eco-friendliness, and high stability under acidic and oxidative conditions. However, rapid recombination of photoinduced electron–hole pairs and a narrow light response range to the solar spectrum lead to low photocatalytic activity of MWO_4-based materials, thus significantly hampering their wide usage in practice. To enable their widespread practical usage, significant efforts have been devoted, by developing new concepts and innovative strategies. In this review, we aim to provide an integrated overview of the fundamentals and recent progress of MWO_4-based photocatalysts. Furthermore, different strategies, including morphological control, surface modification, heteroatom doping, and heterojunction fabrication, which are employed to promote the photocatalyticactivities of MWO_4-based materials, are systematically summarized and discussed. Finally, existing challenges and a future perspective are also provided to shed light on the development of highly efficient MWO_4-based photocatalysts.展开更多
基金National Key Research and Development Program of China(2017YFB0306605)Key Laboratory of Engines at Tianjin University(Grant No.K2022-06).
文摘This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.
基金The authors gratefully acknowledge financial support from the National Key R&D Program of China(Grant No.2018YFE0118700)the National Natural Science Foundation of China(NSFC Grant No.62174119)+1 种基金the 111 Project(No.B07014)the Foundation for Talent Scientists of Nanchang Institute for Micro-technology of Tianjin University.
文摘Extracellular vesicles(EVs)have recently attracted significant research attention owing to their important biological functions,including cell-to-cell communication.EVs are a type of membrane vesicles that are secreted into the extracellular space by most types of cells.Several biological biomolecules found in EVs,such as proteins,microRNA,and DNA,are closely related to the pathogenesis of human malignancies,making EVs valuable biomarkers for disease diagnosis,treatment,and prognosis.Therefore,EV separation and detection are prerequisites for providing important information for clinical research.Conventional separation methods suffer from low levels of purity,as well as the need for cumbersome and prolonged operations.Moreover,detection methods require trained operators and present challenges such as high operational expenses and low sensitivity and specificity.In the past decade,platforms for EV separation and detection based on nanostructures have emerged.This article reviews recent advances in nanostructure-based EV separation and detection techniques.First,nanostructures based on membranes,nanowires,nanoscale deterministic lateral displacement,and surface modification are presented.Second,high-throughput separation of EVs based on nanostructures combined with acoustic and electric fields is described.Third,techniques combining nanostructures with immunofluorescence,surface plasmon resonance,surface-enhanced Raman scattering,electrochemical detection,or piezoelectric sensors for high-precision EV analysis are summarized.Finally,the potential of nanostructures to detect individual EVs is explored,with the aim of providing insights into the further development of nanostructure-based EV separation and detection techniques.
基金This work was supported by the National Natural Science Foundation of China(No.21807117)Hunan Provincial Natural Science Foundation of China(Nos.2022JJ20052 and 2021JJ30788)+1 种基金the Science and Technology Innovation Program of Hunan Province(No.2022RC1109)Central South University Innovation-Driven Research Programme(No.2023CXQD021).
文摘Artificial cells are constructed from synthetic materials to imitate the biological functions of natural cells.By virtue of nanoengineering techniques,artificial cells with designed biomimetic functions provide alternatives to natural cells,showing vast potential for biomedical applications.Especially in cancer treatment,the deficiency of immunoactive macrophages results in tumor progression and immune resistance.To overcome the limitation,a BaSO_(4)@ZIF-8/transferrin(TRF)nanomacrophage(NMΦ)is herein constructed as an alternative to immunoactive macrophages.Alike to natural immunoactive macrophages,NMΦis stably retained in tumors through the specific affinity of TRF to tumor cells.Zn^(2+)as an“artificial cytokine”is then released from the ZIF-8 layer of NMΦunder tumor microenvironment.Similar as proinflammatory cytokines,Zn^(2+)can trigger cell anoikis to expose tumor antigens,which are selectively captured by the BaSO_(4)cavities.Therefore,the hierarchical nanostructure of NMΦs allows them to mediate immunogenic death of tumor cells and subsequent antigen capture for T cell activation to fabricate long-term antitumor immunity.As a proof-of-concept,the NMΦmimics the biological functions of macrophage,including tumor residence,cytokine release,antigen capture and immune activation,which is hopeful to provide a paradigm for the design and biomedical applications of artificial cells.
基金the National Natural Science Foundation of China(Grant Nos.12004137,62071200,and 12104236)Shandong Provincial Natural Science Foundation of China(Grant Nos.ZR2020QA052,ZR2020ZD28,ZR2021MA040,and ZR2021MA060).
文摘Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose that the 1D CrN nanostructure is a FM half-metal,which can generate the fully spin-polarized current.The ab initio molecular dynamic simulation and the phonon spectrum calculation demonstrate that the 1D CrN nanostructure is thermodynamically stable.The partially occupied Cr-d orbitals endow the nanostructure with FM half-metallicity,in which the half-metallic gap(?s)reaches up to 1.58 eV.The ferromagnetism in the nanostructure is attributed to the superexchange interaction between the magnetic Cr atoms,and a sizable magnetocrystalline anisotropy energy(MAE)is obtained.Moreover,the transverse stretching of nanostructure can effectively modulate?s and MAE,accompanied by the preservation of half-metallicity.A nanocable is designed by encapsulating the CrN nanostructure with a BN nanotube,and the intriguing magnetic and electronic properties of the nanostructure are retained.These novel characteristics render the 1D CrN nanostructure as a compelling candidate for exploiting high-performance spintronic devices.
基金the financial support from National Natural Science Foundation of China(92163117,52072389,52172058,51972006)。
文摘Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality.However,it is limited by the high overpotential of oxygen evolution reaction(OER)at the anode.To reduce the operating voltage of electrolyzer,herein thermodynamically favorable glycerol oxidation reaction(GOR)is proposed to replace the OER.Moreover,vertical Ni O flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution,respectively.Meanwhile,excluding the explosion risk of mixed H_2/O_(2),a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer.Impressively,the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV,and exhibits good long-term stability.This work provides a new paradigm of hydrogen production with low cost and good feasibility.
基金supported by the Special Actions for Developing High-performance Manufacturing of Ministry of Industry and Information Technology(Grant No.:TC200H02J)the Research Grants Council of the Hong Kong Special Ad-ministrative Region,China(Project No.:PolyU 152125/18E)+1 种基金the National Natural Science Foundation of China(Project No.:U19A20104)the Research Committee of The Hong Kong Polytechnic University(Project Code G-RK2V).
文摘The lightness and high strength-to-weight ratio of the magnesium alloy have attracted more interest in various applications.However,micro/nanostructure generation on their surfaces remains a challenge due to the flammability and ignition.Motivated by this,this study proposed a machining process,named the ultraprecision diamond surface texturing process,to machine the micro/nanostructures on magnesium alloy surfaces.Experimental results showed the various microstructures and sawtooth-shaped nanostructures were successfully generated on the AZ31B magnesium alloy surfaces,demonstrating the effectiveness of this proposed machining process.Furthermore,sawtooth-shaped nanostructures had the function of inducing the optical effect and generating different colors on workpiece surfaces.The colorful letter and colorful flower image were clearly viewed on magnesium alloy surfaces.The corresponding cutting force,chip morphology,and tool wear were systematically investigated to understand the machining mechanism of micro/nanostructures on magnesium alloy surfaces.The proposed machining process can further improve the performances of the magnesium alloy and extend its functions to other fields,such as optics.
基金National Research Foundation of Korea,Grant/Award Numbers:2021M3H4A1A03057403,2021R1A6A3A03039988,2021R1A6A3A13046700,2021R1A2B5B03001851。
文摘The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron transport layer for bismuth vanadate(BiVO_(4))with a short charge diffusion length.In_(2)O_(3)NRs reinforce the electron transport and hole blocking of BiVO_(4),surpassing the state-of-the-art photoelectrochemical performances of BiVO_(4)-based photoanodes.Also,a tannin-nickel-iron complex(TANF)is used as an oxygen evolution catalyst to speed up the reaction kinetics.The final TANF/BiVO_(4)/In_(2)O_(3)NR photoanode generates photocurrent densities of 7.1 mAcm^(−2) in sulfite oxidation and 4.2 mA cm^(−2) in water oxidation at 1.23 V versus the reversible hydrogen electrode.Furthermore,the“artificial leaf,”which is a tandem cell with a perovskite/silicon solar cell,shows a solar-to-hydrogen conversion efficiency of 6.2%for unbiased solar water splitting.We reveal significant advances in the photoactivity of TANF/BiVO_(4)/In_(2)O_(3)NRs from the tailored nanostructure and band structure for charge dynamics.
基金supported by the National Natural Science Foundation of China(61904166,22209145)the Natural Science Foundation of Sichuan Province(2022NSFSC0258)the Fundamental Research Funds for the Central Universities(YJ2021129)。
文摘The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.
文摘A fiberform nanostructure was synthesized by exposing high-density helium plasma to a 100 nm thick tungsten thin film in the linear plasma device NAGDIS-II.After helium plasma exposure,the cross-section of samples was observed by a scanning electron microscope,transmission electron microscope,and focused ion beam scanning electron microscope.It is shown that the thickness of the nanostructured layer increases significantly for only a short irradiation time.The optical absorptivity remains high,even though it is exposed to helium plasma for a short time.The usage of the thin film can shorten the processing time for nanostructure growth,which will be beneficial for commercial production.
基金The authors greatly acknowledge the financial support from the National Natural Science Foundation of China(No.51873126)the Fundamental Research Funds for the Central Universities,as well as the funding from the Science&Technology Department(No.2021YFH0123)of Sichuan Province.
文摘Electrically conductive elastomer composites(CECs)with segregated networks of conductive nanofillers show high potential in stretchable strain sensors due to balanced mechanical and electrical properties,yet the sensitivity at low strain is generally insufficient for practical application.Herein,we report an easy and effective way to improve the resistive response to low strain for CECs with segregated network structure via adding stiff alumina into carbon nanostructures(CNS).The CEC containing 0.7 wt%CNS and 5 wt%Al_(2)O_(3) almost sustains the same elasticity(elongation at break of~900%)and conductivity(0.8 S/m)as the control,while the piezoresistive sensitivity is significantly improved.Thermoplastic polyurethane(TPU)composites with a segregated network of hybrid nanofillers(CNS and Al_(2)O_(3))show much higher strain sensitivity(Gauge factor,GF-566)at low strain(45%strain)due to a local stress concentration effect,this sensitivity is superior to that of TPU/CNS composites(GF-11).Such a local stress concentration effect depends on alumina content and its distribution at the TPU particle interface.In addition,CECs with hybrid fillers show better reproducibility in cyclic piezoresistive behavior testing than the control.This work offers an easy method for fabricating CECs with a segregated filler network offering stretchable strain sensors with a high strain sensitivity.
基金Project supported by the Natural Science Foundation of Shanghai Science and Technology Committee (Grant No. 18ZR1403300)。
文摘Surface morphological features and nanostructures generated during SiC graphitization process can significantly affect fabrication of high-quality epitaxial graphene on semiconductor substrates.In this work,we investigate the surface morphologies and atomic structures during graphitization process of 4H-SiC(0001) using scanning tunneling microscopy.Our high-magnified scanning-tunneling-microscope images exhibit the appearance and gradual developments of SiC(1 × 1)nanostructures after 1100℃ cleaning treatments,irregularly distributed among carbon nanocaps and(√3×√3) reconstruction domains.A model for the formation and growth progression of SiC(1 × 1) nanostructures has been proposed.When post-annealing temperature reaches 1300 ℃,the nanoholes and nanoislands can be observed on the surface,and multilayer graphene is often detected lying on the top surface of those nanoislands.These results provide profound insights into the complex evolution process of surface morphology during SiC thermal decomposition and will shed light on fabrication of SiC nanostructures and graphene nanoflakes.
文摘Microwave irradiation is considered an important approach to Green Chemistry, because of its ability to rapidly increase the internal temperature of polar-organic compounds that lead to synthesis times of minutes rather than hours when compared to conventional thermal heating. This works describes a dual allometry test for the discrimination between the solvents and reagents used in the microwave-assisted synthesis of transition metal (zinc oxide, palladium silver, platinum, and gold) nanostructures. The test is performed in log-log process energy phase-space projection, where the synthesis data (kJ against kJ·mol<sup>-1</sup>) has a power-law signature. The test is shown to discriminate between recommended Green Chemistry, problematic Green Chemistry, and Green Chemistry hazardous solvents. Typically, recommended Green chemistry exhibits a broad y-axes distribution within an upper exponent = 1 and lower exponent = 0.5. Problematic Green Chemistry exhibits a y-axes narrower distribution with an upper exponent = 0.94 and lower exponent = 0.64. Non-Green Chemistry hazardous data exhibits a further narrowing of the y-axes distribution within upper exponent = 0.87 and lower exponent = 0.66. In all three cases, the y-axes is aligned to original database power-law signature. It is also shown that in the x-axes direction (process energy budget) the grouped order of magnitude decreases from four orders for recommended Green Chemistry solvent and reagent data, through two orders for non-Green Chemistry hazardous material and down to one order for problematic Green Chemistry.
基金This work was supported by the Donations for Research Projects_RMGS(project number 9229006)M.A.A.expresses appreciation to the Deanship of Scientific Research at King Khalid University Saudi Arabia(R.G.P.2/40/43).
文摘Human civilization has been relentlessly inspired by the nurturing lessons;nature is teaching us.From birds to airplanes and bullet trains,nature gave us a lot of perspective in aiding the progress and development of countless industries,inventions,transportation,and many more.Not only that nature inspired us in such technological advances but also,nature stimulated the advancement of micro-and nanostructures.Nature-inspired nanoarchitectures have been consid-ered a favorable structure in electrode materials for a wide range of applications.It offers various positive attributes,especially in energy storage applications,such as the formation of hierarchical two-dimen-sional and three-dimensional interconnected networked structures that benefit the electrodes in terms of high surface area,high porosity and rich surface textural features,and eventually,delivering high capacity and outstanding overall material stability.In this review,we compre-hensively assessed and compiled the recent advances in various nature-inspired based on animal-and human-inspired nanostructures used for supercapacitors.This comprehensive review will help researchers to accommodate nature-inspired nanostructures in industrializing energy storage and many other applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91850205 and 11904021).
文摘Chirality is ubiquitous in natural world.Although with similar physical and chemical properties,chiral enantiomers could play different roles in biochemical processes.Discrimination of chiral enantiomers is extremely important in biochemical,analytical chemistry,and pharmaceutical industries.Conventional chiroptical spectroscopic methods are disadvantageous at a limited detection sensitivity because of the weak signals of natural chiral molecules.Recently,superchiral fields were proposed to effectively enhance the interaction between light and molecules,allowing for ultrasensitive chiral detection.Intensive theoretical and experimental works have been devoted to generation of superchiral fields based on artificial nanostructures and their application in ultrasensitive chiral sensing.In this review,we present a survey on these works.We begin with the introduction of chiral properties of electromagnetic fields.Then,the optical chirality enhancement and ultrasensitive chiral detection based on chiral and achiral nanostructures are discussed respectively.Finally,we give a short summary and a perspective for the future ultrasensitive chiral sensing.
基金financial support from USACH-Chile, Council of Scientific and Industrial Research (CSIR) and University Grant Commission (UGC) New Delhi, India
文摘Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by the simple variation of applied voltage from 2-6 V between the electrodes. Lead sheet was used as an anode and platinum sheet served as a cathode. Anodic oxidation at 2 V resulted in the variable edge sized（1-2 μm） hexagon-like structures in the electrolyte. When the applied potential was increased to 4 V a structure of distorted hexagons consisting of some flower-like structures were obtained. Further increment of potential up to 6 V resulted in flower like structures of α-PbO2 having six petals. The diameter of the flower-like structures was 200-500 nm and the size of a petal was 100-200 nm.
基金the Natural Science Foundation of China (51831008 and 51471146)the National High Technology Research and Development Program of China (2012AA03A504)+2 种基金the National Science Foundation for Distinguished Young Scholars of China (50925522)the China Postdoctoral Science Foundation (2018M631762)the Youth Talent Projects of Colleges in Hebei Province (BJ2018056).
文摘Bearings are the most important component of nearly all mechanical equipment, as they guarantee the steady running of the equipment, which is especially important for high-end equipment such as highspeed trains and shield tunneling machines. Requirements regarding the quality of bearings are increasing with the rapid development in technology. A country’s bearings manufacturing level directly reflects the level of that country’s steel metallurgy and machinery manufacturing. The performance of the bearing steel is the critical factor that determines the quality of a bearing. The development of new bearing steel with higher performance is the ambition of material researchers and the expectation of the manufacturing industry. Many famous bearing manufacturing enterprises are competing to develop the new generation of bearing steel. Nanostructured bainitic bearing steel (NBBS), which is a newly developed bearing steel, not only possesses high strength and toughness, but also exhibits excellent wear resistance and rolling contact fatigue (RCF) resistance. In recent years, relevant achievements in NBBS in China have led to significant progress in this field. NBBS was first used in China to manufacture large bearings for wind turbines and heavy-duty bearings, with excellent performance. As a result, NBBS and its corresponding heat-treatment process have been included in the national and industry standards for the first time. The bearing industry considers the exploitation of NBBS to be epoch-making, and has termed this kind of bearing as the second generation of bainitic bearing. In this paper, the development of NBBS is reviewed in detail, including its advantages and disadvantages. Further research directions for NBBS are also proposed.
基金supported by the National Key Research and Development Program (no.2016YFA0202500)National Basic Research Program of China (2015CB932500)the Natural Scientific Foundation of China (nos.21306102 and 21422604)
文摘Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient and effective energy conversion and storage. The booming development of nanotechnology affords emerging but effective tools in designing advanced energy material. We reviewed the significant progress and dominated nanostructured energy materials in electrochemical energy conversion and storage devices, including lithium ion batteries, lithium–sulfur batteries, lithium–oxygen batteries, lithium metal batteries, and supercapacitors. The use of nanostructured electrocatalyst for effective electrocatalysis in oxygen reduction and oxygen evolution reactions for fuel cells and metal–air batteries was also included. The challenges in the undesirable side reactions between electrolytes and electrode due to high electrode/electrolyte contact area, low volumetric energy density of electrode owing to low tap density,and uniform production of complex energy materials in working devices should be overcome to fully demonstrate the advanced energy nanostructures for electrochemical energy conversion and storage. The energy chemistry at the interfaces of nanostructured electrode/electrolyte is highly expected to guide the rational design and full demonstration of energy materials in a working device.
文摘Investigations were made on the phase evolution and thermal stability of the 90W 7Ni 3Fe(mass fraction, %) milled powders by means of XRD and DTA. The results showed that ball milling produced an ultrafine composite powder consisting of supersolidus solution W(Ni, Fe) and amorphous phase, owing to the fast diffusion rate induced by high density of lattice defects and nanograin boundaries. The amorphous phase results from the extension of the solubility of W in γ (Ni, Fe) phase which forms during the first 3 h of ball milling.
基金supported by NSTIP strategic technologies programs,number(12-NAN2551-02)in the Kingdom of Saudi Arabia
文摘Because of the interesting and multifunctional properties,recently,ZnO nanostructures are considered as excellent material for fabrication of highly sensitive and selective gas sensors.Thus,ZnO nanomaterials are widely used to fabricate efficient gas sensors for the detection of various hazardous and toxic gases.The presented review article is focusing on the recent developments of NO2gas sensors based on ZnO nanomaterials.The review presents the general introduction of some metal oxide nanomaterials for gas sensing application and finally focusing on the structure of ZnO and its gas sensing mechanisms.Basic gas sensing characteristics such as gas response,response time,recovery time,selectivity,detection limit,stability and recyclability,etc are also discussed in this article.Further,the utilization of various ZnO nanomaterials such as nanorods,nanowires,nano-micro flowers,quantum dots,thin films and nanosheets,etc for the fabrication of NO2gas sensors are also presented.Moreover,various factors such as NO2concentrations,annealing temperature,ZnO morphologies and particle sizes,relative humidity,operating temperatures which are affecting the NO2gas sensing properties are discussed in this review.Finally,the review article is concluded and future directions are presented.
基金support of NSFC 51702284Fundamental Research Funds for the Central Universities (112109*172210171)+2 种基金the Startup Foundation for Hundred-Talent Program of Zhejiang University (112100-193820101/001/022)support of the NSFC 21501138the Science Research Foundation of Wuhan Institute of Technology (K201513)
文摘Visible-light-responsive ternary metal tungstate(MWO_4) photocatalysts are being increasingly investigated for energy conversion and environmental purification applications owing to their striking features, including low cost,eco-friendliness, and high stability under acidic and oxidative conditions. However, rapid recombination of photoinduced electron–hole pairs and a narrow light response range to the solar spectrum lead to low photocatalytic activity of MWO_4-based materials, thus significantly hampering their wide usage in practice. To enable their widespread practical usage, significant efforts have been devoted, by developing new concepts and innovative strategies. In this review, we aim to provide an integrated overview of the fundamentals and recent progress of MWO_4-based photocatalysts. Furthermore, different strategies, including morphological control, surface modification, heteroatom doping, and heterojunction fabrication, which are employed to promote the photocatalyticactivities of MWO_4-based materials, are systematically summarized and discussed. Finally, existing challenges and a future perspective are also provided to shed light on the development of highly efficient MWO_4-based photocatalysts.
