There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,a...There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.展开更多
Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental probl...Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental problems.This paper focuses on near-zero emission technologies and applications for clean coal-fired power.The long-term operation states of near-zero emission units were evaluated,and synergistic and special mercury(Hg)control technologies were researched.The results show that the principle technical route of near-zero emission,which was applied to 101 of China’s coal-fired units,has good adaptability to coal properties.The emission concentrations of particulate matter(PM),SO2,and NOx were below the emission limits of gas-fired power plants and the compliance rates of the hourly average emission concentrations reaching near-zero emission in long-term operation exceeded 99%.With the application of near-zero emission technologies,the generating costs increased by about 0.01 CNY∙(kW∙h)-1.However,the total emissions of air pollutants decreased by about 90%,resulting in effective improvement of the ambient air quality.Furthermore,while the Hg emission concentrations of the near-zero emission units ranged from 0.51 to 2.89μg∙m^-3,after the modified fly ash(MFA)special Hg removal system was applied,Hg emission concentration reached as low as 0.29μg∙m^-3.The operating cost of this system was only 10%-15%of the cost of mainstream Hg removal technology using activated carbon injection.Based on experimental studies carried out in a 50000 m^3∙h^-1 coal-fired flue gas pollutant control pilot platform,the interaction relationships of multi-pollutant removal were obtained and solutions were developed for emissions reaching different limits.A combined demonstration application for clean coal-fired power,with the new“1123”eco-friendly emission limits of 1,10,20 mg∙m^-3,and 3μg∙m^-3,respectively,for PM,SO2,NOx,and Hg from near-zero emission coal-fired power were put forward and realized,providing engineering and technical support for the national enhanced pollution emission standards.展开更多
The geomagnetic field affects all living organisms on the Earth.In this study we investigated the developmental and behavioral effects of rearing Mythimna separata in a near-zero magnetic field(<500 n T)compared to...The geomagnetic field affects all living organisms on the Earth.In this study we investigated the developmental and behavioral effects of rearing Mythimna separata in a near-zero magnetic field(<500 n T)compared to the local geomagnetic field(approximately 50μT).The near-zero magnetic field produced by a Helmholtz coil system significantly lengthened larval and pupal development durations,increased male longevity,and reduced pupal weight,female reproduction,and the relative expression level of the vitellogenin(Vg)gene in newly emerged females.Moreover,the near-zero magnetic field had a considerable negative effect on the mating ratio of M.separata adults.In addition,the moths in the near-zero magnetic field displayed less flight activity late in the night than those in the Earth's normal geomagnetic field,indicating that the flight rhythm of M.separata may be affected by the near-zero magnetic field.Reduction in magnetic field intensity may have negative effects on the development and flight of oriental armyworm,with consequent additional effects on its migration.展开更多
The Zr（0.5）Hf（0.5）VPO7 is successfully synthesized by the solid-state method with near-zero thermal expansion. Powder x-ray diffraction（XRD）, Raman spectroscopy, thermal dilatometry, and scanning electron micros...The Zr（0.5）Hf（0.5）VPO7 is successfully synthesized by the solid-state method with near-zero thermal expansion. Powder x-ray diffraction（XRD）, Raman spectroscopy, thermal dilatometry, and scanning electron microscopy（SEM） are used to investigate the structure, the phase transition, and the coefficient of thermal expansion（CTE） of Zr（0.5）Hf（0.5）VPO7. The investigation results show that the samples are of the single cubic type with a space group of Pa3ˉ at room temperature（RT）.It can be inferred that the superstructure is transformed from the 3 × 3 × 3 superstructure to the 1 × 1 × 1 ideal crystal in a temperature range between 310 K and 323 K. The CTE is measured by a dilatometer to be 0.59 × 10^（-6） K^（-1）（310 K–673 K）. The values of intrinsic（XRD） and extrinsic（dilatometric） thermal expansion are both near zero. The results show that Zr（0.5）Hf（0.5）VPO7 has near-zero thermal expansion behavior over a wide temperature range.展开更多
Near-zero energy buildings( nZEBs) are considered as an effective solution to mitigating CO_2 emissions and reducing the energy usage in the building sector. A proper sizing of the nZEB systems( e. g. HVAC systems,ene...Near-zero energy buildings( nZEBs) are considered as an effective solution to mitigating CO_2 emissions and reducing the energy usage in the building sector. A proper sizing of the nZEB systems( e. g. HVAC systems,energy supply systems,energy storage systems, etc.) is essential for achieving the desired annual energy balance,thermal comfort,and grid independence. Two significant factors affecting the sizing of nZEB systems are the uncertainties confronted by the building usage condition and weather condition,and the degradation effects in nZEB system components. The former factor has been studied by many researchers; however,the impact of degradation is still neglected in most studies. Degradation is prevalent in energy components of nZEB and inevitably leads to the deterioration of nZEB life-cycle performance. As a result,neglecting the degradation effects may lead to a system design which can only achieve the desired performance at the beginning several years. This paper,therefore,proposes a life-cycle performance analysis( LCPA) method for investigating the impact of degradation on the longitudinal performance of the nZEBs. The method not only integrates the uncertainties in predicting building thermal load and weather condition,but also considers the degradation in the nZEB systems. Based on the proposed LCPA method,a two-stage method is proposed to improve the sizing of the nZEB systems.The study can improve the designers "understanding of the components"degradation impacts and the proposed method is effective in the life-cycle performance analysis and improvements of nZEBs. It is the first time that the impacts of degradation and uncertainties on nZEB LCP are analysed. Case studies showthat an nZEB might not fulfil its definition at all after some years due to component degradation,while the proposed two-stage design method can effectively alleviate this problem.展开更多
We investigate a one-dimensional acoustic metamaterial with a refractive index of near zero（RINZ） using an array of very thin elastic membranes located along a narrow waveguide pipe. The characteristics of the effec...We investigate a one-dimensional acoustic metamaterial with a refractive index of near zero（RINZ） using an array of very thin elastic membranes located along a narrow waveguide pipe. The characteristics of the effective density, refractive index, and phase velocity of the metamaterial indicate that, at the resonant frequency fm, the metamaterial has zero mass density and a phase transmission that is nearly uniform. We present a mechanism for dramatic acoustic energy squeezing and anomalous acoustic transmission by connecting the metamaterial to a normal waveguide with a larger cross-section. It is shown that at a specific frequency f1, transmission enhancement and energy squeezing are achieved despite the strong geometrical mismatch between the metamaterial and the normal waveguide. Moreover, to confirm the energy transfer properties, the acoustic pressure distribution, acoustic wave reflection coefficient, and energy transmission coefficient are also calculated. These results prove that the RINZ metamaterial provides a new design method for acoustic energy squeezing,super coupling, wave front transformation, and acoustic wave filtering.展开更多
Anisotropic metamaterial with only one component of the mass density tensor near zero （ADNZ） is proposed to control the sound wave propagation. We find that such an anisotropic metamaterial can be used to realize pe...Anisotropic metamaterial with only one component of the mass density tensor near zero （ADNZ） is proposed to control the sound wave propagation. We find that such an anisotropic metamaterial can be used to realize perfect bending waveguides. According to a coordinate transformation, the surface waves on the input and output interfaces of the ADNZ metamaterial induces the sound energy flow to be redistributed and match smoothly with the propagating modes inside the metamaterial waveguide. According to the theory of bending waveguide, we realize the ＂T＂-type sound shunting and convergence, as well as acoustic channel selection by embedding small-sized defects. Numerical calculations are performed to confirm the above effects.展开更多
INTRODUCTION Recent development has seen a drastic increase in energy use trends in Saudi Arabian buildings leading to a demand for an effective course of action for energy conservation and production.A case study-bas...INTRODUCTION Recent development has seen a drastic increase in energy use trends in Saudi Arabian buildings leading to a demand for an effective course of action for energy conservation and production.A case study-based research initiative explor-ing near-zero energy potential in Saudi Arabia was undertaken.A 4-bedroom detached single-family faculty residence at King Fahd University of Petroleum and Minerals(KFUPM)representing common regional housing design trends was utilized.A base case simulation model of the house was developed and val-idated using short-term and real-time energy consumption data.Three sets of strategies:passive design strategies,representative codes and standards,and renewable technology were employed in the new design of the house.Passive strategies com-prised a green roof,a ventilated wall system,a sloped roof,and insulation for thermal bridges.These alternatives helped reduce the annual energy consumption of the house by 17.2%.The most recent version of the International Energy Conserva-tion Code(IECC 2012)was also incorporated along with ASHRAE Standard 62.2 for ventilation.The code and standard together reduced the annual energy consumption by 31.1%.Solar PV was then utilized to reduce grid utilization for the remainder of the house energy loads.This strategy provided 24.7%of the total energy consumed annually.A combination of strategies showed a 70.7%energy consumption reduction,thereby decreasing the energy index of the house from 162.9 to 47.7 kWh/m^(2)/yr.The Zero Energy Building(ZEB)concepts and strategies utilized in this study demonstrate a socially responsible approach to achieving near-zero energy performance for an existing house.展开更多
China aims to peak CO_(2)emissions before 2030 and to achieve carbon neutrality before 2060;hence,industrial sectors in China are keen to figure out appropriate pathways to support the national target of carbon neutra...China aims to peak CO_(2)emissions before 2030 and to achieve carbon neutrality before 2060;hence,industrial sectors in China are keen to figure out appropriate pathways to support the national target of carbon neutrality.The objective of this study is to explore near-zero emission pathways for the steel industry of China through a detailed technology assessment.The innovative technology development has been simulated using the AIM-China/steel model,developed by including material-based technologies and optimal cost analysis.Six scenarios have been given in terms of different levels of production output,emission reduction and carbon tax.Near-zero emission and carbon tax scenarios have shown that China's steel industry can achieve near-zero emission using electric furnaces and hydrogen-based direct reduction iron technologies with policy support.Based on these technologies,minimised production costs have been calculated,revealing that the steel produced by these technologies is cost-effective.Moreover,the feedstock cost can play a key role in these technology portfolios,especially the cost of scrap,iron ore and hydrogen.In addition,the feedstock supply can have strong regional effects and can subsequently impact the allocation of steelmaking in the future.Therefore,China can achieve near-zero emissions in the steel industry,and electric furnace and hydrogen-based direct reduction iron technologies are crucial to achieving them.展开更多
为保证电池储能持续平抑波动,该文提出一种基于双层协调控制的电池集成储能控制策略。外层控制中,提出基于近零相位自适应滤波的风功率平滑策略,不仅使并网功率满足1、10 min时间尺度波动平抑需求,还减小了控制过程中相位滞后,并在风功...为保证电池储能持续平抑波动,该文提出一种基于双层协调控制的电池集成储能控制策略。外层控制中,提出基于近零相位自适应滤波的风功率平滑策略,不仅使并网功率满足1、10 min时间尺度波动平抑需求,还减小了控制过程中相位滞后,并在风功率较平稳时自适应控制储能系统退出运行,有效降低了储能系统额定功率需求和运行负担。内层控制中,采用不同充、放电特性的两组磷酸铁锂电池集成以跟踪功率指令,并定义等效荷电状态(state of charge,SOC)指标衡量储能系统的整体SOC水平,随后将等效SOC与外层控制相联系,提出基于Logistic动态区间的SOC优化策略,确保优化过程中并网功率满足要求,并解决充、放电不均衡情况下的高/低SOC极端运行状态,保证电池储能持续平抑波动能力,同时可使两组电池储能接近最优放电深度(depth of discharge,DOD)运行,充分利用其循环寿命。展开更多
基金supported by the National Key Research and Development Program of China(No.2022YFB4602600)the National Natural Science Foundation of China(No.52221001)Hunan Provincial Innovation Foundation for Postgraduate(No.CX20220406)。
文摘There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.
基金the National Science and Technology Support Program of China(2015BAA05B02).
文摘Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental problems.This paper focuses on near-zero emission technologies and applications for clean coal-fired power.The long-term operation states of near-zero emission units were evaluated,and synergistic and special mercury(Hg)control technologies were researched.The results show that the principle technical route of near-zero emission,which was applied to 101 of China’s coal-fired units,has good adaptability to coal properties.The emission concentrations of particulate matter(PM),SO2,and NOx were below the emission limits of gas-fired power plants and the compliance rates of the hourly average emission concentrations reaching near-zero emission in long-term operation exceeded 99%.With the application of near-zero emission technologies,the generating costs increased by about 0.01 CNY∙(kW∙h)-1.However,the total emissions of air pollutants decreased by about 90%,resulting in effective improvement of the ambient air quality.Furthermore,while the Hg emission concentrations of the near-zero emission units ranged from 0.51 to 2.89μg∙m^-3,after the modified fly ash(MFA)special Hg removal system was applied,Hg emission concentration reached as low as 0.29μg∙m^-3.The operating cost of this system was only 10%-15%of the cost of mainstream Hg removal technology using activated carbon injection.Based on experimental studies carried out in a 50000 m^3∙h^-1 coal-fired flue gas pollutant control pilot platform,the interaction relationships of multi-pollutant removal were obtained and solutions were developed for emissions reaching different limits.A combined demonstration application for clean coal-fired power,with the new“1123”eco-friendly emission limits of 1,10,20 mg∙m^-3,and 3μg∙m^-3,respectively,for PM,SO2,NOx,and Hg from near-zero emission coal-fired power were put forward and realized,providing engineering and technical support for the national enhanced pollution emission standards.
基金the earmarked fund for China Agriculture Research System(CARS-22)the National Key Research and Development Program of China(2017YFD0201802 and 2017YFD0201701)+1 种基金the National Natural Science Foundation of China(31672019,31870367 and 31871951)the Beijing Municipal Natural Science Foundation,China(6172030)。
文摘The geomagnetic field affects all living organisms on the Earth.In this study we investigated the developmental and behavioral effects of rearing Mythimna separata in a near-zero magnetic field(<500 n T)compared to the local geomagnetic field(approximately 50μT).The near-zero magnetic field produced by a Helmholtz coil system significantly lengthened larval and pupal development durations,increased male longevity,and reduced pupal weight,female reproduction,and the relative expression level of the vitellogenin(Vg)gene in newly emerged females.Moreover,the near-zero magnetic field had a considerable negative effect on the mating ratio of M.separata adults.In addition,the moths in the near-zero magnetic field displayed less flight activity late in the night than those in the Earth's normal geomagnetic field,indicating that the flight rhythm of M.separata may be affected by the near-zero magnetic field.Reduction in magnetic field intensity may have negative effects on the development and flight of oriental armyworm,with consequent additional effects on its migration.
基金supported by the National Natural Science Foundation of China(Grant Nos.11574276,U173112,and 41401384)the Project of Shandong Provincial Higher Educational Science and Technology Program,China(Grant No.J17KB127)+1 种基金the Science and Technology Development Plans of Binzhou City,China(Grant Nos.2014ZC0307 and 2015ZC0210)Binzhou University Research Fund Project,China(Grant Nos.BZXYG1513 and BZXYG1706)
文摘The Zr（0.5）Hf（0.5）VPO7 is successfully synthesized by the solid-state method with near-zero thermal expansion. Powder x-ray diffraction（XRD）, Raman spectroscopy, thermal dilatometry, and scanning electron microscopy（SEM） are used to investigate the structure, the phase transition, and the coefficient of thermal expansion（CTE） of Zr（0.5）Hf（0.5）VPO7. The investigation results show that the samples are of the single cubic type with a space group of Pa3ˉ at room temperature（RT）.It can be inferred that the superstructure is transformed from the 3 × 3 × 3 superstructure to the 1 × 1 × 1 ideal crystal in a temperature range between 310 K and 323 K. The CTE is measured by a dilatometer to be 0.59 × 10^（-6） K^（-1）（310 K–673 K）. The values of intrinsic（XRD） and extrinsic（dilatometric） thermal expansion are both near zero. The results show that Zr（0.5）Hf（0.5）VPO7 has near-zero thermal expansion behavior over a wide temperature range.
文摘Near-zero energy buildings( nZEBs) are considered as an effective solution to mitigating CO_2 emissions and reducing the energy usage in the building sector. A proper sizing of the nZEB systems( e. g. HVAC systems,energy supply systems,energy storage systems, etc.) is essential for achieving the desired annual energy balance,thermal comfort,and grid independence. Two significant factors affecting the sizing of nZEB systems are the uncertainties confronted by the building usage condition and weather condition,and the degradation effects in nZEB system components. The former factor has been studied by many researchers; however,the impact of degradation is still neglected in most studies. Degradation is prevalent in energy components of nZEB and inevitably leads to the deterioration of nZEB life-cycle performance. As a result,neglecting the degradation effects may lead to a system design which can only achieve the desired performance at the beginning several years. This paper,therefore,proposes a life-cycle performance analysis( LCPA) method for investigating the impact of degradation on the longitudinal performance of the nZEBs. The method not only integrates the uncertainties in predicting building thermal load and weather condition,but also considers the degradation in the nZEB systems. Based on the proposed LCPA method,a two-stage method is proposed to improve the sizing of the nZEB systems.The study can improve the designers "understanding of the components"degradation impacts and the proposed method is effective in the life-cycle performance analysis and improvements of nZEBs. It is the first time that the impacts of degradation and uncertainties on nZEB LCP are analysed. Case studies showthat an nZEB might not fulfil its definition at all after some years due to component degradation,while the proposed two-stage design method can effectively alleviate this problem.
基金supported by the National Natural Science Foundation of China(Grant Nos.61571222,11104142,and 11474160)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20161009)+1 种基金the Qing Lan Project of Jiangsu Province,Chinathe Six Talent Peaks Project of Jiangsu Province,China
文摘We investigate a one-dimensional acoustic metamaterial with a refractive index of near zero（RINZ） using an array of very thin elastic membranes located along a narrow waveguide pipe. The characteristics of the effective density, refractive index, and phase velocity of the metamaterial indicate that, at the resonant frequency fm, the metamaterial has zero mass density and a phase transmission that is nearly uniform. We present a mechanism for dramatic acoustic energy squeezing and anomalous acoustic transmission by connecting the metamaterial to a normal waveguide with a larger cross-section. It is shown that at a specific frequency f1, transmission enhancement and energy squeezing are achieved despite the strong geometrical mismatch between the metamaterial and the normal waveguide. Moreover, to confirm the energy transfer properties, the acoustic pressure distribution, acoustic wave reflection coefficient, and energy transmission coefficient are also calculated. These results prove that the RINZ metamaterial provides a new design method for acoustic energy squeezing,super coupling, wave front transformation, and acoustic wave filtering.
基金Project supported by the National Basic Research Program of China(Grant No.2012CB921504)the National Natural Science Foundation of China(Grant No.11474160)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.020414380001)the State Key Laboratory of Acoustics,Chinese Academy of Sciences(Grant No.SKLA201609)the Priority Academic Program Development of Jiangsu Higher Education Institution,China
文摘Anisotropic metamaterial with only one component of the mass density tensor near zero （ADNZ） is proposed to control the sound wave propagation. We find that such an anisotropic metamaterial can be used to realize perfect bending waveguides. According to a coordinate transformation, the surface waves on the input and output interfaces of the ADNZ metamaterial induces the sound energy flow to be redistributed and match smoothly with the propagating modes inside the metamaterial waveguide. According to the theory of bending waveguide, we realize the ＂T＂-type sound shunting and convergence, as well as acoustic channel selection by embedding small-sized defects. Numerical calculations are performed to confirm the above effects.
文摘INTRODUCTION Recent development has seen a drastic increase in energy use trends in Saudi Arabian buildings leading to a demand for an effective course of action for energy conservation and production.A case study-based research initiative explor-ing near-zero energy potential in Saudi Arabia was undertaken.A 4-bedroom detached single-family faculty residence at King Fahd University of Petroleum and Minerals(KFUPM)representing common regional housing design trends was utilized.A base case simulation model of the house was developed and val-idated using short-term and real-time energy consumption data.Three sets of strategies:passive design strategies,representative codes and standards,and renewable technology were employed in the new design of the house.Passive strategies com-prised a green roof,a ventilated wall system,a sloped roof,and insulation for thermal bridges.These alternatives helped reduce the annual energy consumption of the house by 17.2%.The most recent version of the International Energy Conserva-tion Code(IECC 2012)was also incorporated along with ASHRAE Standard 62.2 for ventilation.The code and standard together reduced the annual energy consumption by 31.1%.Solar PV was then utilized to reduce grid utilization for the remainder of the house energy loads.This strategy provided 24.7%of the total energy consumed annually.A combination of strategies showed a 70.7%energy consumption reduction,thereby decreasing the energy index of the house from 162.9 to 47.7 kWh/m^(2)/yr.The Zero Energy Building(ZEB)concepts and strategies utilized in this study demonstrate a socially responsible approach to achieving near-zero energy performance for an existing house.
基金This work was supported by Korea Environment Industry&Technology Institute(KEITI)through Climate Change R&D Project for New Climate Regime,funded by Korea Ministry of Environment(MOE)(2022003560012).
文摘China aims to peak CO_(2)emissions before 2030 and to achieve carbon neutrality before 2060;hence,industrial sectors in China are keen to figure out appropriate pathways to support the national target of carbon neutrality.The objective of this study is to explore near-zero emission pathways for the steel industry of China through a detailed technology assessment.The innovative technology development has been simulated using the AIM-China/steel model,developed by including material-based technologies and optimal cost analysis.Six scenarios have been given in terms of different levels of production output,emission reduction and carbon tax.Near-zero emission and carbon tax scenarios have shown that China's steel industry can achieve near-zero emission using electric furnaces and hydrogen-based direct reduction iron technologies with policy support.Based on these technologies,minimised production costs have been calculated,revealing that the steel produced by these technologies is cost-effective.Moreover,the feedstock cost can play a key role in these technology portfolios,especially the cost of scrap,iron ore and hydrogen.In addition,the feedstock supply can have strong regional effects and can subsequently impact the allocation of steelmaking in the future.Therefore,China can achieve near-zero emissions in the steel industry,and electric furnace and hydrogen-based direct reduction iron technologies are crucial to achieving them.
文摘为保证电池储能持续平抑波动,该文提出一种基于双层协调控制的电池集成储能控制策略。外层控制中,提出基于近零相位自适应滤波的风功率平滑策略,不仅使并网功率满足1、10 min时间尺度波动平抑需求,还减小了控制过程中相位滞后,并在风功率较平稳时自适应控制储能系统退出运行,有效降低了储能系统额定功率需求和运行负担。内层控制中,采用不同充、放电特性的两组磷酸铁锂电池集成以跟踪功率指令,并定义等效荷电状态(state of charge,SOC)指标衡量储能系统的整体SOC水平,随后将等效SOC与外层控制相联系,提出基于Logistic动态区间的SOC优化策略,确保优化过程中并网功率满足要求,并解决充、放电不均衡情况下的高/低SOC极端运行状态,保证电池储能持续平抑波动能力,同时可使两组电池储能接近最优放电深度(depth of discharge,DOD)运行,充分利用其循环寿命。
