High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high vo...High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.展开更多
Anode-free Li-metal batteries are of significant interest to energy storage industries due to their intrinsically high energy.However,the accumulative Li dendrites and dead Li continuously consume active Li during cyc...Anode-free Li-metal batteries are of significant interest to energy storage industries due to their intrinsically high energy.However,the accumulative Li dendrites and dead Li continuously consume active Li during cycling.That results in a short lifetime and low Coulombic efficiency of anode-free Li-metal batteries.Introducing effective electrolyte additives can improve the Li deposition homogeneity and solid electrolyte interphase(SEI)stability for anode-free Li-metal batteries.Herein,we reveal that introducing dual additives,composed of LiAsF6 and fluoroethylene carbonate,into a low-cost commercial carbonate electrolyte will boost the cycle life and average Coulombic efficiency of NMC‖Cu anode-free Li-metal batteries.The NMC‖Cu anode-free Li-metal batteries with the dual additives exhibit a capacity retention of about 75%after 50 cycles,much higher than those with bare electrolytes(35%).The average Coulombic efficiency of the NMC‖Cu anode-free Li-metal batteries with additives can maintain 98.3%over 100 cycles.In contrast,the average Coulombic efficiency without additives rapidly decline to 97%after only 50 cycles.In situ Raman measurements reveal that the prepared dual additives facilitate denser and smoother Li morphology during Li deposition.The dual additives significantly suppress the Li dendrite growth,enabling stable SEI formation on anode and cathode surfaces.Our results provide a broad view of developing low-cost and high-effective functional electrolytes for high-energy and long-life anode-free Li-metal batteries.展开更多
Oxide ceramic coatings were fabricated on tantalum alloys by micro-arc oxidation (MAO) to improve their hardness and tribological properties. The MAO coatings were manufactured in a mixed silicatephosphate electrolyte...Oxide ceramic coatings were fabricated on tantalum alloys by micro-arc oxidation (MAO) to improve their hardness and tribological properties. The MAO coatings were manufactured in a mixed silicatephosphate electrolyte containing NaF and/or EDTA (ethylene diamine tetraacetic acid). The surface morphology,cross-sectional view, chemical composition, hardness, and wear performance of the coatings were analysed. As revealed by the scanning electron microscopy, silica-rich nodules appear on the MAO coating obtained in the silicate-phosphate electrolyte, but the formation of nodules is inhibited with NaF and/or EDTA in the electrolyte.Also, they reduce the roughness and improve the compactness of the coatings, which are composed of Ta_(2)O_(5),(Ta, O), and TaO. A thick and hard coating is obtained in the NaF-containing electrolyte, and the tribology performance is effectively improved. With additives, the nodule structure is detached from the coating surface and dissolved in the electrolyte. By using NaF as an electrolyte additive, the abrasion performance of the MAO coating is enhanced by decreasing the nodule structure, increasing the size of micropores, and improving the coating hardness.展开更多
In perovskite solar cells(PSCs),the inherent defects of perovskite film and the random distribution of excess lead iodide(PbI_(2))prevent the improvement of efficiency and stability.Herein,natural cellulose is used as...In perovskite solar cells(PSCs),the inherent defects of perovskite film and the random distribution of excess lead iodide(PbI_(2))prevent the improvement of efficiency and stability.Herein,natural cellulose is used as the raw material to design a series of cellulose derivatives for perovskite crystallization engineering.The cationic cellulose derivative C-Im-CN with cyano-imidazolium(Im-CN)cation and chloride anion prominently promotes the crystallization process,grain growth,and directional orientation of perovskite.Meanwhile,excess PbI_(2)is transferred to the surface of perovskite grains or formed plate-like crystallites in local domains.These effects result in suppressing defect formation,decreasing grain boundaries,enhancing carrier extraction,inhibiting non-radiative recombination,and dramatically prolonging carrier lifetimes.Thus,the PSCs exhibit a high power conversion efficiency of 24.71%.Moreover,C-Im-CN has multiple interaction sites and polymer skeleton,so the unencapsulated PSCs maintain above 91.3%of their initial efficiencies after 3000 h of continuous operation in a conventional air atmosphere and have good stability under high humidity conditions.The utilization of biopolymers with excellent structure-designability to manage the perovskite opens a state-of-the-art avenue for manufacturing and improving PSCs.展开更多
Zn-based aqueous batteries(ZABs) are gaining widespread popularity due to their low cost and high safety profile. However, the application of ZABs faces significant challenges, such as dendrite growth and parasitic re...Zn-based aqueous batteries(ZABs) are gaining widespread popularity due to their low cost and high safety profile. However, the application of ZABs faces significant challenges, such as dendrite growth and parasitic reactions of metallic Zn anodes. Therefore, achieving high-energy–density ZABs necessitates addressing the fundamental thermodynamics and kinetics of Zn anodes. Various strategies are available to mitigate these challenges, with electrolyte additive engineering emerging as one of the most efficient and promising approaches. Despite considerable research in this field, a comprehensive understanding of the intrinsic mechanisms behind the high performance of electrolyte additives remains limited. This review aims to provide a detailed introduction to functional electrolyte additives and thoroughly explore their underlying mechanisms. Additionally, it discusses potential directions and perspectives in additive engineering for ZABs, offering insights into future development and guidelines for achieving high-performance ZABs.展开更多
Considerable research efforts have been dedicated to investigating the side reactions and the growth of Zn dendritic in aqueous zinc-ion batteries(AZIBs).The incorporation of organic solvents as additives in electroly...Considerable research efforts have been dedicated to investigating the side reactions and the growth of Zn dendritic in aqueous zinc-ion batteries(AZIBs).The incorporation of organic solvents as additives in electrolytes has yielded highly promising results.Nevertheless,their pervasive use has been hindered by concerns regarding their toxicity,flammability,and economic viability.Herein,we propose the utilization of γ-valerolactone(γ-V),a novel eco-friendly solvent,as an alternative for conventional organic additives to improve the performance of Zn anode.Experimental investigations and theoretical analyses have verified that γ-V additives can diminish the Zn^(2+)-desolvation energy and enhance Zn^(2+) transport kinetics.The adsorbed γ-V molecules modulate the nucleation and diffusion of Zn^(2+),facilitating Zn growth along the(002) crystal plane,thus inhibiting dendrite formation and side reactions.Consequently,the modified electrolyte with 3% γ-V exhibit highly reversible cycling for 2800 h at1 mA cm^(-2) and 1 mA h cm^(-2) in Zn//Zn symmetric cell.The Zn//KVOH coin cells deliver a capacity retention of 74.7% after 1000 cycles at 5 A g^(-1).The Zn//KVOH pouch cells maintain a capacity retention of78.7% over 90 cycles at 3 A g^(-1).Notably,the γ-V additives also effectively alleviate the self-discharge phenomenon.This work provides valuable insights on the development of aqueous zinc-ion batteries with superior safety through the modulation of electrolytes using eco-friendly additives.展开更多
Background Nursery pigs undergo stressors in the post-weaning period that result in production and welfare chal-lenges.These challenges disproportionately impact the offspring of primiparous sows compared to those of ...Background Nursery pigs undergo stressors in the post-weaning period that result in production and welfare chal-lenges.These challenges disproportionately impact the offspring of primiparous sows compared to those of mul-tiparous counterparts.Little is known regarding potential interactions between parity and feed additives in the post-weaning period and their effects on nursery pig microbiomes.Therefore,the objective of this study was to investigate the effects of maternal parity on sow and offspring microbiomes and the influence of sow parity on pig fecal microbi-ome and performance in response to a prebiotic post-weaning.At weaning,piglets were allotted into three treat-ment groups:a standard nursery diet including pharmacological doses of Zn and Cu(Con),a group fed a commercial prebiotic only(Preb)based on an Aspergillus oryzae fermentation extract,and a group fed the same prebiotic plus Zn and Cu(Preb+ZnCu).Results Although there were no differences in vaginal microbiome composition between primiparous and mul-tiparous sows,fecal microbiome composition was different(R^(2)=0.02,P=0.03).The fecal microbiomes of primiparous offspring displayed significantly higher bacterial diversity compared to multiparous offspring at d 0 and d 21 post-weaning(P<0.01),with differences in community composition observed at d 21(R^(2)=0.03,P=0.04).When analyzing the effects of maternal parity within each treatment,only the Preb diet triggered significant microbiome distinc-tions between primiparous and multiparous offspring(d 21:R^(2)=0.13,P=0.01;d 42:R^(2)=0.19,P=0.001).Composi-tional differences in pig fecal microbiomes between treatments were observed only at d 21(R^(2)=0.12,P=0.001).Pigs in the Con group gained significantly more weight throughout the nursery period when compared to those in the Preb+ZnCu group.Conclusions Nursery pig gut microbiome composition was influenced by supplementation with an Aspergillus oryzae fermentation extract,with varying effects on performance when combined with pharmacological levels of Zn and Cu or for offspring of different maternal parity groups.These results indicate that the development of nursery pig gut microbiomes is shaped by maternal parity and potential interactions with the effects of dietary feed additives.展开更多
Magnesia-calcium materials have stable hot performance,good resistance to the erosion and corrosion of liquid steel and steel slag,and a special role in purifying liquid steel,so they are widely used in iron and steel...Magnesia-calcium materials have stable hot performance,good resistance to the erosion and corrosion of liquid steel and steel slag,and a special role in purifying liquid steel,so they are widely used in iron and steel industry.However,hydration of magnesia-calcium materials seriously restricts their use,so researches have been done to improve their hydration resistance,obtaining a series of achievements.In this paper,the improvements on the hydration resistance of magnesia-calcium materials by additives in recent 20 years were presented,and their mechanisms were summarized.展开更多
To address the problem of identifying multiple types of additives in lubricating oil,a method based on midinfrared spectral band selection using the eXtreme Gradient Boosting(XGBoost)algorithm combined with the ant co...To address the problem of identifying multiple types of additives in lubricating oil,a method based on midinfrared spectral band selection using the eXtreme Gradient Boosting(XGBoost)algorithm combined with the ant colony optimization(ACO)algorithm is proposed.The XGBoost algorithm was used to train and test three additives,T534(alkyl diphenylamine),T308(isooctyl acid thiophospholipid octadecylamine),and T306(trimethylphenol phosphate),separately,in order to screen for the optimal combination of spectral bands for each additive.The ACO algorithm was used to optimize the parameters of the XGBoost algorithm to improve the identification accuracy.During this process,the support vector machine(SVM)and hybrid bat algorithms(HBA)were included as a comparison,generating four models:ACO-XGBoost,ACO-SVM,HBA-XGboost,and HBA-SVM.The results showed that all four models could identify the three additives efficiently,with the ACO-XGBoost model achieving 100%recognition of all three additives.In addition,the generalizability of the ACO-XGBoost model was further demonstrated by predicting a lubricating oil containing the three additives prepared in our laboratory and a collected sample of commercial oil currently in use。展开更多
Zinc-ion batteries are promising for large-scale electrochemical energy storage systems,which still suffer from interfacial issues,e.g.,hydrogen evolution side reaction(HER),self-corrosion,and uncontrollable dendritic...Zinc-ion batteries are promising for large-scale electrochemical energy storage systems,which still suffer from interfacial issues,e.g.,hydrogen evolution side reaction(HER),self-corrosion,and uncontrollable dendritic Zn electrodeposition.Although the regulation of electric double layer(EDL)has been verified for interfacial issues,the principle to select the additive as the regulator is still misted.Here,several typical amino acids with different characteristics were examined to reveal the interfacial behaviors in regulated EDL on the Zn anode.Negative charged acidic polarity(NCAP)has been unveiled as the guideline for selecting additive to reconstruct EDL with an inner zincophilic H_(2)O-poor layer and to replace H_(2)O molecules of hydrated Zn^(2+)with NCAP glutamate.Taking the synergistic effects of EDL regulation,the uncontrollable interface is significantly stabilized from the suppressed HER and anti-self-corrosion with uniform electrodeposition.Consequently,by adding NCAP glutamate,a high average Coulombic efficiency of 99.83%of Zn metal is achieved in Zn|Cu asymmetrical cell for over 2000 cycles,and NH4V4O10|Zn full cell exhibits a high-capacity retention of 82.1%after 3000 cycles at 2 A g^(-1).Recapitulating,the NCAP principle posted here can quicken the design of trailblazing electrolyte additives for aqueous Zn-based electrochemical energy storage systems.展开更多
The use of food additives in industrial production has the advantage of improving sensory properties, technological quality and extending the shelf life of foods. Among the most widely used additives are antioxidants,...The use of food additives in industrial production has the advantage of improving sensory properties, technological quality and extending the shelf life of foods. Among the most widely used additives are antioxidants, which prevent oxidation, browning and rancidity reactions in foods. However, the strong presence of these additives on the market is not without risks for human health, and should be controlled to guarantee food safety. Analysis of the risks associated with consumption of foods containing these additives requires, among other things, information on the frequency of use of these additives in various consumer products. The aim of this study is therefore to identify the antioxidants present in industrial food products distributed in Dakar. The methodology adopted consists of a qualitative analysis based on the identification of additives from food labels. Investigations were carried out in 9 stores, 4 superettes and 2 supermarkets located in different districts of Dakar. The results revealed the presence of 12 antioxidant additives, dominated by citric acid (53%) and ascorbic acid (29%). These studies have also highlighted the simultaneous use of several antioxidants in the same food product. Moreover, for some artificial antioxidants identified antioxydant such as BHA and BHT, health risks are associated with their consumption. The results of this study open up prospects for the development of information databases on food additives.展开更多
Food safety has become a major concern for consumers, as well as a priority for regulatory authorities. Faced with the growing industrial and domestic use of food additives, many questions are being asked and concerns...Food safety has become a major concern for consumers, as well as a priority for regulatory authorities. Faced with the growing industrial and domestic use of food additives, many questions are being asked and concerns are being felt by consumers around the world. Consumer perception defines the acceptability or rejection of food products, and has an impact on consumption patterns and behavior. To assess the level of knowledge and perception of food additives, a pilot study was carried out on a sample of 200 people in Dakar and Saint-Louis. A questionnaire was used to assess the acceptance or rejection, use and impact of food additives by consumers in Senegal. The results revealed several aspects. On the whole, the people surveyed expressed great mistrust and even rejection of these substances added to food products. This consumer perception is shared throughout the world, as indicated in numerous surveys. It also emerges from this study that, although most consumers are aware of the existence of these additives and their uses in the home, they feel that the use of these substances in industrial production is too excessive. What’s more, consumers associate food additives with numerous pathologies such as cancer, diabetes, hypertension, stroke and even sexual impotence. For some of these indexed pathologies, scientific studies have reached the same conclusions, although controversy still persists. On the other hand, for some of the other adverse effects mentioned, no cause-and-effect relationship has been scientifically demonstrated. In these latter cases, it seems that negative communication, misinformation and misconceptions have a major influence on consumer perception of food additives.展开更多
Terahertz time-domain spectroscopy is a kind of far-infrared spectroscopy technology,and its spectrum reflects the internal properties of substances with rich physical and chemical information,so the use of terahertz ...Terahertz time-domain spectroscopy is a kind of far-infrared spectroscopy technology,and its spectrum reflects the internal properties of substances with rich physical and chemical information,so the use of terahertz waves can be used to qualitatively identify food additives containing nitrogen elements.Analytic hierarchy process(AHP)was originally used to solve evaluation-type problems,and this paper introduces it into the field of terahertz spectral qualitative analysis,proposes a terahertz time-domain spectral qualitative identification method combined with analytic hierarchy process,and verifies the feasibility of the method by taking four common food additives(xylitol,L-alanine,sorbic acid,and benzoic acid)and two illegal additives(melamine,and Sudan Red No.I)as the objects of study.Firstly,the collected terahertz time-domain spectral data were pre-processed and transformed into a data set consisting of peaks,peak positions,peak numbers and overall trends;then,the data were divided into comparison and test sets,and a qualitative additive identification model incorporating analytic hierarchy process was constructed and parameter optimisation was performed.The results showed that the qualitative identification accuracies of additives based on single factors,i.e.,overall trend,peak value,peak position,and peak number,were 80.23%,70.93%,67.44%,and 40.70%,respectively,whereas the identification accuracy of the analytic hierarchy process qualitative identification method based on multi-factors could be improved to 92.44%.In addition,the fuzzy characterisation of the absorption spectrum data was binarised in the data pre-processing stage and used as the base data for the overall trend,and the recognition accuracy was improved to 94.19%by combining the fuzzy characterisation method of such data with the hierarchical analysis qualitative recognition model.The results show that it is feasible to use terahertz technology to identify different varieties of additives,and this paper constructs a hierarchical analytical qualitative model with better effect,which provides a new means for food additives detection,and the method is simple in steps,with a small demand for samples,which is suitable for the rapid detection of small samples.展开更多
Lithium/Sodium-ion batteries(LIB/SIB)have attracted enormous attention as a promising electrochemical energy storage system due to their high energy density and long cycle life.One of the major hurdles is the initial ...Lithium/Sodium-ion batteries(LIB/SIB)have attracted enormous attention as a promising electrochemical energy storage system due to their high energy density and long cycle life.One of the major hurdles is the initial irreversible capacity loss during the first few cycles owing to forming the solid electrolyte interphase layer(SEI).This process consumes a profusion of lithium/sodium,which reduces the overall energy density and cycle life.Thus,a suitable approach to compensate for the irreversible capacity loss must be developed to improve the energy density and cycle life.Pre-lithiation/sodiation is a widely accepted process to compensate for the irreversible capacity loss during the initial cycles.Various strategies such as physical,chemical,and electrochemical pre-lithiation/sodiation have been explored;however,these approaches add an extra step to the current manufacturing process.Alternative to these strategies,pre-lithiation/sodiation additives have attracted enormous attention due to their easy adaptability and compatibility with the current battery manufacturing process.In this review,we consolidate recent developments and emphasize the importance of using pre-lithiation/sodiation additives(anode and cathode)to overcome the irreversible capacity loss during the initial cycles in lithium/sodium-ion batteries.This review also addresses the technical and scientific challenges of using pre-lithiation/sodiation additives and offers the insights to boost the energy density and cycle life with their possible commercial exploration.The most important prerequisites for designing effective pre-lithiation/sodiation additives have been explored and the future directions have been discussed.展开更多
Although their cost-effectiveness and intrinsic safety,aqueous zinc-ion batteries suffer from notorious side reactions including hydrogen evolution reaction,Zn corrosion and passivation,and Zn dendrite formation on th...Although their cost-effectiveness and intrinsic safety,aqueous zinc-ion batteries suffer from notorious side reactions including hydrogen evolution reaction,Zn corrosion and passivation,and Zn dendrite formation on the anode.Despite numerous strategies to alleviate these side reactions have been demonstrated,they can only provide limited performance improvement from a single aspect.Herein,a triple-functional additive with trace amounts,ammonium hydroxide,was demonstrated to comprehensively protect zinc anodes.The results show that the shift of electrolyte pH from 4.1 to 5.2 lowers the HER potential and encourages the in situ formation of a uniform ZHS-based solid electrolyte interphase on Zn anodes.Moreover,cationic NH^(4+)can preferentially adsorb on the Zn anode surface to shield the“tip effect”and homogenize the electric field.Benefitting from this comprehensive protection,dendrite-free Zn deposition and highly reversible Zn plating/stripping behaviors were realized.Besides,improved electrochemical performances can also be achieved in Zn//MnO_(2)full cells by taking the advantages of this triple-functional additive.This work provides a new strategy for stabilizing Zn anodes from a comprehensive perspective.展开更多
Combustion performance of pulverized coal(PC)in blast furnace(BF)process is regarded as a criteria parameter to assess the prop-er injection dosage of PC.In this paper,effects of two kinds of additives,Fe_(2)O_(3) and...Combustion performance of pulverized coal(PC)in blast furnace(BF)process is regarded as a criteria parameter to assess the prop-er injection dosage of PC.In this paper,effects of two kinds of additives,Fe_(2)O_(3) and CaO,on PC combustion were studied using the thermo-gravimetric method.The results demonstrate that both the Fe_(2)O_(3) and CaO can promote combustion performance index of PC including igni-tion index(C_(i)),burnout index(D_(b)),as well as comprehensive combustibility index(S_(n)).The S_(n) increases from 1.37×10^(−6) to 2.16×10^(−6)%2·min^(−2)·℃^(−3) as the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%.Additionally,the combustion kinetics of PC was clarified using the Coats-Redfern method.The results show that the activation energy(E)of PC combustion decreases after adding the above additives.For instance,the E decreases from 56.54 to 35.75 kJ/mol when the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%,which supports the improved combustion per-formance.Moreover,it is uneconomic to utilize pure Fe_(2)O_(3) and CaO in production.Based on economy analysis,we selected the iron-bearing dust(IBD)which contains much Fe_(2)O_(3) and CaO component to investigate,and got the same effects.Therefore,the IBD is a potential option for catalytic PC combustion in BF process.展开更多
The stability of lithium metal anodes essentially dictates the lifespan of high-energy-density lithium metal batteries.Lithium nitrate(LiNO_(3))is widely recognized as an effective additive to stabilize lithium metal ...The stability of lithium metal anodes essentially dictates the lifespan of high-energy-density lithium metal batteries.Lithium nitrate(LiNO_(3))is widely recognized as an effective additive to stabilize lithium metal anodes by forming LiN_(x)O_(y)-containing solid electrolyte interphase(SEI).However,its poor solubility in electrolytes,especially ester electrolytes,hinders its applications in lithium metal batteries.Herein,an organic nitrate,isosorbide nitrate(ISDN),is proposed to replace LiNO_(3).ISDNhas a high solubility of 3.3M in ester electrolytes due to the introduction of organic segments in the molecule.The decomposition of ISDN generates LiN_(x)O_(y)-rich SEI,enabling uniform lithium deposition.The lifespan of lithium metal batteries with ISDN significantly increases from 80 to 155 cycles under demanding conditions.Furthermore,a lithium metal pouch cell of 439Whkg^(−1) delivers 50 cycles.This work opens a new avenue to develop additives by molecular modifications for practical lithium metal batteries.展开更多
Background:This study was conducted to investigate the effects of each phytogenic feed additive(PFA;PFA1,bitter citrus extract;PFA2,a microencapsulated blend of thymol and carvacrol;PFA3,a mixture of bitter citrus ext...Background:This study was conducted to investigate the effects of each phytogenic feed additive(PFA;PFA1,bitter citrus extract;PFA2,a microencapsulated blend of thymol and carvacrol;PFA3,a mixture of bitter citrus extract,thymol,and carvacrol;PFA4,a premixture of grape seed,grape marc extract,green tea,and hops;PFA5,fenugreek seed powder)on the growth performance,nutrient digestibility,intestinal morphology,and immune response in weaned pigs infected with Escherichia coli(E.coli).Results:A total of 634-week-old weaned pigs were placed in individual metabolic cages and assigned to seven treatment groups.The seven treatments were as follows:1)NC;basal diet without E.coli challenge,2)PC;basal diet with E.coli challenge,3)T1;PC+0.04%PFA1,4)T2;PC+0.01%PFA2,5)T3;PC+0.10%PFA3,6)T4;PC+0.04%PFA4,7)T5;PC+0.10%PFA5.The experiments lasted in 21 d,including 7 d before and 14 d after the first E.coli challenge.In the E.coli challenge treatments,all pigs were orally inoculated by dividing a total of 10 mL of E.coli F18 for 3 consecutive days.The PFA-added groups significantly increased(P<0.05)average daily gain and feed efficiency and decreased(P<0.05)the fecal score at d 0 to 14 post-inoculation(PI).Tumor necrosis factorαwas significantly lower(P<0.05)in the PFA-added groups except for T1 in d 14 PI compared to the PC treatment.The T3 had a higher(P<0.05)immunoglobulin G and immunoglobulin A concentration compared to the PC treatment at d 7 PI.Also,T3 showed significantly higher(P<0.05)villus height:crypt depth and claudin 1 expression in ileal mucosa,and significantly downregulated(P<0.05)the expression of calprotectin compared to the PC treatment.Conclusions:Supplementation of PFA in weaned pigs challenged with E.coli alleviated the negative effects of E.coli and improved growth performance.Among them,the mixed additive of bitter citrus extract,thymol,and carvacrol showed the most effective results,improving immune response,intestinal morphology,and expression of tight junctions.展开更多
Perovskite solar cells(PSCs)have been demonstrated to be one of the most promising technologies in the field of renewable energy.However,the presence of the defects in the perovskite films greatly limits the efficienc...Perovskite solar cells(PSCs)have been demonstrated to be one of the most promising technologies in the field of renewable energy.However,the presence of the defects in the perovskite films greatly limits the efficiency and the stability of the PSCs.The additive engineering is one of the most effective approaches to overcome this problem.Most of the successful additives are extracted from the petroleum-based materials,while the research on the biomass-based additives is still lagging behind.In this paper,two ecofriendly hydroxyalkyl cellulose additives,i.e.,hydroxyethyl cellulose(HEC)and hydroxylpropyl cellulose(HPC),are investigated on the performance of the MAPbl_(3)-based inverted PSCs.Due to the strong interaction between the hydroxyl groups of the cellulose and the divalent cations of the perovskite,these additives enhance the crystal grain orientation and significantly repair the defects of the perovskite films.Working as the additives,these two cellulose derivatives show a strong passivation ability,which significantly reduces the trap density and improves the optoelectronic feature of the PSCs.Compared with the average power conversion efficiency(PCE)of the control device(19.19%),an enhancement of~10%is achieved after the addition of HEC.The optimized device(PCE=21.25%)with a long-term stability(10:80 h,PCE=20.93%)is achieved by the incorporation of the HEC additives into the precursor solution.It is the best performance among the PSCs with the cellulose additives up to now.This research provides a novel choice to develop a cost-effective and renewable additive for the PSCs with high efficiency and excellent long-term stability.展开更多
B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)t...B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)to facilitate the rapid Li+migration.Nevertheless,its wide-temperature application has been limited by the instability of B-derived CEI layer at high temperature.Herein,dual electrolyte additives,consisting of lithium tetraborate(Li_(2)TB)and 2,4-difluorobiphenyl(FBP),are proposed to boost the widetemperature performances of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)cathode.Theoretical calculation and electrochemical performances analyses indicate that Li_(2)TB and FBP undergo successive decomposition to form a unique dual-layer CEI.FBP acts as a synergistic filming additive to Li_(2)TB,enhancing the hightemperature performance of NCM cathode while preserving the excellent low-temperature cycle stability and the superior rate capability conferred by Li_(2)TB additive.Therefore,the capacity retention of NCM‖Li cells using optimal FBP-Li_(2)TB dual electrolyte additives increases to 100%after 200 cycles at-10℃,99%after 200 cycles at 25℃,and 83%after 100 cycles at 55℃,respectively,much superior to that of base electrolyte(63%/69%/45%).More surprisingly,galvanostatic c ha rge/discharge experiments at different temperatures reveal that NCM‖Li cells using FBP-Li_(2)TB additives can operate at temperatures ranging from-40℃to 60℃.This synergistic interphase modification utilizing dual electrolyte additives to construct a unique dual-layer CEI adaptive to a wide temperature range,provides valuable insights to the practical applications of NCM cathodes for all-climate batteries.展开更多
基金supported by the National Natural Science Foundation of China(22179041)。
文摘High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.
基金fellowship support from the China Scholarship Council
文摘Anode-free Li-metal batteries are of significant interest to energy storage industries due to their intrinsically high energy.However,the accumulative Li dendrites and dead Li continuously consume active Li during cycling.That results in a short lifetime and low Coulombic efficiency of anode-free Li-metal batteries.Introducing effective electrolyte additives can improve the Li deposition homogeneity and solid electrolyte interphase(SEI)stability for anode-free Li-metal batteries.Herein,we reveal that introducing dual additives,composed of LiAsF6 and fluoroethylene carbonate,into a low-cost commercial carbonate electrolyte will boost the cycle life and average Coulombic efficiency of NMC‖Cu anode-free Li-metal batteries.The NMC‖Cu anode-free Li-metal batteries with the dual additives exhibit a capacity retention of about 75%after 50 cycles,much higher than those with bare electrolytes(35%).The average Coulombic efficiency of the NMC‖Cu anode-free Li-metal batteries with additives can maintain 98.3%over 100 cycles.In contrast,the average Coulombic efficiency without additives rapidly decline to 97%after only 50 cycles.In situ Raman measurements reveal that the prepared dual additives facilitate denser and smoother Li morphology during Li deposition.The dual additives significantly suppress the Li dendrite growth,enabling stable SEI formation on anode and cathode surfaces.Our results provide a broad view of developing low-cost and high-effective functional electrolytes for high-energy and long-life anode-free Li-metal batteries.
基金Funded by the National Natural Science Foundation of China (No. 51905506)。
文摘Oxide ceramic coatings were fabricated on tantalum alloys by micro-arc oxidation (MAO) to improve their hardness and tribological properties. The MAO coatings were manufactured in a mixed silicatephosphate electrolyte containing NaF and/or EDTA (ethylene diamine tetraacetic acid). The surface morphology,cross-sectional view, chemical composition, hardness, and wear performance of the coatings were analysed. As revealed by the scanning electron microscopy, silica-rich nodules appear on the MAO coating obtained in the silicate-phosphate electrolyte, but the formation of nodules is inhibited with NaF and/or EDTA in the electrolyte.Also, they reduce the roughness and improve the compactness of the coatings, which are composed of Ta_(2)O_(5),(Ta, O), and TaO. A thick and hard coating is obtained in the NaF-containing electrolyte, and the tribology performance is effectively improved. With additives, the nodule structure is detached from the coating surface and dissolved in the electrolyte. By using NaF as an electrolyte additive, the abrasion performance of the MAO coating is enhanced by decreasing the nodule structure, increasing the size of micropores, and improving the coating hardness.
基金supported by the National Natural Science Foundation of China(No.52173292 and U2004211)the Youth Innovation Promotion Association CAS(No.2018040).
文摘In perovskite solar cells(PSCs),the inherent defects of perovskite film and the random distribution of excess lead iodide(PbI_(2))prevent the improvement of efficiency and stability.Herein,natural cellulose is used as the raw material to design a series of cellulose derivatives for perovskite crystallization engineering.The cationic cellulose derivative C-Im-CN with cyano-imidazolium(Im-CN)cation and chloride anion prominently promotes the crystallization process,grain growth,and directional orientation of perovskite.Meanwhile,excess PbI_(2)is transferred to the surface of perovskite grains or formed plate-like crystallites in local domains.These effects result in suppressing defect formation,decreasing grain boundaries,enhancing carrier extraction,inhibiting non-radiative recombination,and dramatically prolonging carrier lifetimes.Thus,the PSCs exhibit a high power conversion efficiency of 24.71%.Moreover,C-Im-CN has multiple interaction sites and polymer skeleton,so the unencapsulated PSCs maintain above 91.3%of their initial efficiencies after 3000 h of continuous operation in a conventional air atmosphere and have good stability under high humidity conditions.The utilization of biopolymers with excellent structure-designability to manage the perovskite opens a state-of-the-art avenue for manufacturing and improving PSCs.
基金financially National Natural Science Foundation of China (22309165)Excellent Youth Foundation of Henan Province (242300421126)+6 种基金Talent Development Funding Project of Shanghai (2021030)Joint Fund of Science and Technology R&D Plan of Henan Province (232301420053)Postdoctoral Science Foundation of China (2023M743170)Key Research Projects of Higher Education Institutions of Henan Province (24A530010, and 23A530002)Key Laboratory of Adv. Mater. of Ministry of Education (Adv Mat2023-17)State Key Laboratory of Inorganic Synthesis & Preparative Chemistry Jilin University (2024-34)Frontier Exploration Projects of Longmen Laboratory of Henan (LMQYTSKT021)。
文摘Zn-based aqueous batteries(ZABs) are gaining widespread popularity due to their low cost and high safety profile. However, the application of ZABs faces significant challenges, such as dendrite growth and parasitic reactions of metallic Zn anodes. Therefore, achieving high-energy–density ZABs necessitates addressing the fundamental thermodynamics and kinetics of Zn anodes. Various strategies are available to mitigate these challenges, with electrolyte additive engineering emerging as one of the most efficient and promising approaches. Despite considerable research in this field, a comprehensive understanding of the intrinsic mechanisms behind the high performance of electrolyte additives remains limited. This review aims to provide a detailed introduction to functional electrolyte additives and thoroughly explore their underlying mechanisms. Additionally, it discusses potential directions and perspectives in additive engineering for ZABs, offering insights into future development and guidelines for achieving high-performance ZABs.
基金National Natural Science Foundation of China (Grant No. 52103302, and No. 52070124)Shandong Provincial Natural Science Foundation (ZR2021QB182)+1 种基金Start-up Foundation for Senior Talents of Jiangsu University (21JDG041)China Postdoctoral Science Foundation (2023M731357)。
文摘Considerable research efforts have been dedicated to investigating the side reactions and the growth of Zn dendritic in aqueous zinc-ion batteries(AZIBs).The incorporation of organic solvents as additives in electrolytes has yielded highly promising results.Nevertheless,their pervasive use has been hindered by concerns regarding their toxicity,flammability,and economic viability.Herein,we propose the utilization of γ-valerolactone(γ-V),a novel eco-friendly solvent,as an alternative for conventional organic additives to improve the performance of Zn anode.Experimental investigations and theoretical analyses have verified that γ-V additives can diminish the Zn^(2+)-desolvation energy and enhance Zn^(2+) transport kinetics.The adsorbed γ-V molecules modulate the nucleation and diffusion of Zn^(2+),facilitating Zn growth along the(002) crystal plane,thus inhibiting dendrite formation and side reactions.Consequently,the modified electrolyte with 3% γ-V exhibit highly reversible cycling for 2800 h at1 mA cm^(-2) and 1 mA h cm^(-2) in Zn//Zn symmetric cell.The Zn//KVOH coin cells deliver a capacity retention of 74.7% after 1000 cycles at 5 A g^(-1).The Zn//KVOH pouch cells maintain a capacity retention of78.7% over 90 cycles at 3 A g^(-1).Notably,the γ-V additives also effectively alleviate the self-discharge phenomenon.This work provides valuable insights on the development of aqueous zinc-ion batteries with superior safety through the modulation of electrolytes using eco-friendly additives.
基金This study was partially supported by funds from the Agricultural Research,Education,Extension and Technology Transfer(AGREETT)and MNDrive Global Food Ventures Programs,both from the University of MinnesotaPartial funding was supplied by BioZyme,Inc,St.Joseph,Missouri,USA and New Fashion Pork,Jackson,MN,USA.
文摘Background Nursery pigs undergo stressors in the post-weaning period that result in production and welfare chal-lenges.These challenges disproportionately impact the offspring of primiparous sows compared to those of mul-tiparous counterparts.Little is known regarding potential interactions between parity and feed additives in the post-weaning period and their effects on nursery pig microbiomes.Therefore,the objective of this study was to investigate the effects of maternal parity on sow and offspring microbiomes and the influence of sow parity on pig fecal microbi-ome and performance in response to a prebiotic post-weaning.At weaning,piglets were allotted into three treat-ment groups:a standard nursery diet including pharmacological doses of Zn and Cu(Con),a group fed a commercial prebiotic only(Preb)based on an Aspergillus oryzae fermentation extract,and a group fed the same prebiotic plus Zn and Cu(Preb+ZnCu).Results Although there were no differences in vaginal microbiome composition between primiparous and mul-tiparous sows,fecal microbiome composition was different(R^(2)=0.02,P=0.03).The fecal microbiomes of primiparous offspring displayed significantly higher bacterial diversity compared to multiparous offspring at d 0 and d 21 post-weaning(P<0.01),with differences in community composition observed at d 21(R^(2)=0.03,P=0.04).When analyzing the effects of maternal parity within each treatment,only the Preb diet triggered significant microbiome distinc-tions between primiparous and multiparous offspring(d 21:R^(2)=0.13,P=0.01;d 42:R^(2)=0.19,P=0.001).Composi-tional differences in pig fecal microbiomes between treatments were observed only at d 21(R^(2)=0.12,P=0.001).Pigs in the Con group gained significantly more weight throughout the nursery period when compared to those in the Preb+ZnCu group.Conclusions Nursery pig gut microbiome composition was influenced by supplementation with an Aspergillus oryzae fermentation extract,with varying effects on performance when combined with pharmacological levels of Zn and Cu or for offspring of different maternal parity groups.These results indicate that the development of nursery pig gut microbiomes is shaped by maternal parity and potential interactions with the effects of dietary feed additives.
文摘Magnesia-calcium materials have stable hot performance,good resistance to the erosion and corrosion of liquid steel and steel slag,and a special role in purifying liquid steel,so they are widely used in iron and steel industry.However,hydration of magnesia-calcium materials seriously restricts their use,so researches have been done to improve their hydration resistance,obtaining a series of achievements.In this paper,the improvements on the hydration resistance of magnesia-calcium materials by additives in recent 20 years were presented,and their mechanisms were summarized.
基金the Beijing Natural Science Foundation(Grant No.2232066)the Open Project Foundation of State Key Laboratory of Solid Lubrication(Grant LSL-2212).
文摘To address the problem of identifying multiple types of additives in lubricating oil,a method based on midinfrared spectral band selection using the eXtreme Gradient Boosting(XGBoost)algorithm combined with the ant colony optimization(ACO)algorithm is proposed.The XGBoost algorithm was used to train and test three additives,T534(alkyl diphenylamine),T308(isooctyl acid thiophospholipid octadecylamine),and T306(trimethylphenol phosphate),separately,in order to screen for the optimal combination of spectral bands for each additive.The ACO algorithm was used to optimize the parameters of the XGBoost algorithm to improve the identification accuracy.During this process,the support vector machine(SVM)and hybrid bat algorithms(HBA)were included as a comparison,generating four models:ACO-XGBoost,ACO-SVM,HBA-XGboost,and HBA-SVM.The results showed that all four models could identify the three additives efficiently,with the ACO-XGBoost model achieving 100%recognition of all three additives.In addition,the generalizability of the ACO-XGBoost model was further demonstrated by predicting a lubricating oil containing the three additives prepared in our laboratory and a collected sample of commercial oil currently in use。
基金funded by the National Natural Science Foundation of China(U21B2057,12102328,and 52372252)the Newly Introduced Scientific Research Start-up Funds for Hightech Talents(DD11409024).
文摘Zinc-ion batteries are promising for large-scale electrochemical energy storage systems,which still suffer from interfacial issues,e.g.,hydrogen evolution side reaction(HER),self-corrosion,and uncontrollable dendritic Zn electrodeposition.Although the regulation of electric double layer(EDL)has been verified for interfacial issues,the principle to select the additive as the regulator is still misted.Here,several typical amino acids with different characteristics were examined to reveal the interfacial behaviors in regulated EDL on the Zn anode.Negative charged acidic polarity(NCAP)has been unveiled as the guideline for selecting additive to reconstruct EDL with an inner zincophilic H_(2)O-poor layer and to replace H_(2)O molecules of hydrated Zn^(2+)with NCAP glutamate.Taking the synergistic effects of EDL regulation,the uncontrollable interface is significantly stabilized from the suppressed HER and anti-self-corrosion with uniform electrodeposition.Consequently,by adding NCAP glutamate,a high average Coulombic efficiency of 99.83%of Zn metal is achieved in Zn|Cu asymmetrical cell for over 2000 cycles,and NH4V4O10|Zn full cell exhibits a high-capacity retention of 82.1%after 3000 cycles at 2 A g^(-1).Recapitulating,the NCAP principle posted here can quicken the design of trailblazing electrolyte additives for aqueous Zn-based electrochemical energy storage systems.
文摘The use of food additives in industrial production has the advantage of improving sensory properties, technological quality and extending the shelf life of foods. Among the most widely used additives are antioxidants, which prevent oxidation, browning and rancidity reactions in foods. However, the strong presence of these additives on the market is not without risks for human health, and should be controlled to guarantee food safety. Analysis of the risks associated with consumption of foods containing these additives requires, among other things, information on the frequency of use of these additives in various consumer products. The aim of this study is therefore to identify the antioxidants present in industrial food products distributed in Dakar. The methodology adopted consists of a qualitative analysis based on the identification of additives from food labels. Investigations were carried out in 9 stores, 4 superettes and 2 supermarkets located in different districts of Dakar. The results revealed the presence of 12 antioxidant additives, dominated by citric acid (53%) and ascorbic acid (29%). These studies have also highlighted the simultaneous use of several antioxidants in the same food product. Moreover, for some artificial antioxidants identified antioxydant such as BHA and BHT, health risks are associated with their consumption. The results of this study open up prospects for the development of information databases on food additives.
文摘Food safety has become a major concern for consumers, as well as a priority for regulatory authorities. Faced with the growing industrial and domestic use of food additives, many questions are being asked and concerns are being felt by consumers around the world. Consumer perception defines the acceptability or rejection of food products, and has an impact on consumption patterns and behavior. To assess the level of knowledge and perception of food additives, a pilot study was carried out on a sample of 200 people in Dakar and Saint-Louis. A questionnaire was used to assess the acceptance or rejection, use and impact of food additives by consumers in Senegal. The results revealed several aspects. On the whole, the people surveyed expressed great mistrust and even rejection of these substances added to food products. This consumer perception is shared throughout the world, as indicated in numerous surveys. It also emerges from this study that, although most consumers are aware of the existence of these additives and their uses in the home, they feel that the use of these substances in industrial production is too excessive. What’s more, consumers associate food additives with numerous pathologies such as cancer, diabetes, hypertension, stroke and even sexual impotence. For some of these indexed pathologies, scientific studies have reached the same conclusions, although controversy still persists. On the other hand, for some of the other adverse effects mentioned, no cause-and-effect relationship has been scientifically demonstrated. In these latter cases, it seems that negative communication, misinformation and misconceptions have a major influence on consumer perception of food additives.
基金funded by Key Technology Tackling Programme of Inner Mongolia,grant number2021GG0361funded by Basic Research Operating Costs of Colleges and Universities Directly Under the Inner Mongolia Autonomous Region Project。
文摘Terahertz time-domain spectroscopy is a kind of far-infrared spectroscopy technology,and its spectrum reflects the internal properties of substances with rich physical and chemical information,so the use of terahertz waves can be used to qualitatively identify food additives containing nitrogen elements.Analytic hierarchy process(AHP)was originally used to solve evaluation-type problems,and this paper introduces it into the field of terahertz spectral qualitative analysis,proposes a terahertz time-domain spectral qualitative identification method combined with analytic hierarchy process,and verifies the feasibility of the method by taking four common food additives(xylitol,L-alanine,sorbic acid,and benzoic acid)and two illegal additives(melamine,and Sudan Red No.I)as the objects of study.Firstly,the collected terahertz time-domain spectral data were pre-processed and transformed into a data set consisting of peaks,peak positions,peak numbers and overall trends;then,the data were divided into comparison and test sets,and a qualitative additive identification model incorporating analytic hierarchy process was constructed and parameter optimisation was performed.The results showed that the qualitative identification accuracies of additives based on single factors,i.e.,overall trend,peak value,peak position,and peak number,were 80.23%,70.93%,67.44%,and 40.70%,respectively,whereas the identification accuracy of the analytic hierarchy process qualitative identification method based on multi-factors could be improved to 92.44%.In addition,the fuzzy characterisation of the absorption spectrum data was binarised in the data pre-processing stage and used as the base data for the overall trend,and the recognition accuracy was improved to 94.19%by combining the fuzzy characterisation method of such data with the hierarchical analysis qualitative recognition model.The results show that it is feasible to use terahertz technology to identify different varieties of additives,and this paper constructs a hierarchical analytical qualitative model with better effect,which provides a new means for food additives detection,and the method is simple in steps,with a small demand for samples,which is suitable for the rapid detection of small samples.
基金the support of the Deputyship for Research and Innovation-Ministry of Education,Kingdom of Saudi Arabia,for this research through a grant(NU/IFC/INT/01/002)under the Institutional Funding Committee at Najran University,Kingdom of Saudi Arabiathe support from the National Research Foundation of Korea(NRF)funded by the Brain Pool program(2021H1D3A2A02039346)。
文摘Lithium/Sodium-ion batteries(LIB/SIB)have attracted enormous attention as a promising electrochemical energy storage system due to their high energy density and long cycle life.One of the major hurdles is the initial irreversible capacity loss during the first few cycles owing to forming the solid electrolyte interphase layer(SEI).This process consumes a profusion of lithium/sodium,which reduces the overall energy density and cycle life.Thus,a suitable approach to compensate for the irreversible capacity loss must be developed to improve the energy density and cycle life.Pre-lithiation/sodiation is a widely accepted process to compensate for the irreversible capacity loss during the initial cycles.Various strategies such as physical,chemical,and electrochemical pre-lithiation/sodiation have been explored;however,these approaches add an extra step to the current manufacturing process.Alternative to these strategies,pre-lithiation/sodiation additives have attracted enormous attention due to their easy adaptability and compatibility with the current battery manufacturing process.In this review,we consolidate recent developments and emphasize the importance of using pre-lithiation/sodiation additives(anode and cathode)to overcome the irreversible capacity loss during the initial cycles in lithium/sodium-ion batteries.This review also addresses the technical and scientific challenges of using pre-lithiation/sodiation additives and offers the insights to boost the energy density and cycle life with their possible commercial exploration.The most important prerequisites for designing effective pre-lithiation/sodiation additives have been explored and the future directions have been discussed.
基金supported by the National Key Research and Development Program of China(2019YFE0114400)the Guangdong Basic and Applied Basic Research Foundation(2021B1515120005)+7 种基金the National Natural Science Foundation of China(32171721)the Guangdong Basic and Applied Basic Research Foundation(2021B151512000)the Guangzhou Science and Technology Plan Project(202102020262)the State Key Laboratory of Pulp&Paper Engineering(2022C01),the State Key Laboratory of Pulp&Paper Engineering(202208)the Engineering and Physical Sciences Research Council(EPSRCEP/V027433/1EP/V027433/2EP/Y008707/1)。
文摘Although their cost-effectiveness and intrinsic safety,aqueous zinc-ion batteries suffer from notorious side reactions including hydrogen evolution reaction,Zn corrosion and passivation,and Zn dendrite formation on the anode.Despite numerous strategies to alleviate these side reactions have been demonstrated,they can only provide limited performance improvement from a single aspect.Herein,a triple-functional additive with trace amounts,ammonium hydroxide,was demonstrated to comprehensively protect zinc anodes.The results show that the shift of electrolyte pH from 4.1 to 5.2 lowers the HER potential and encourages the in situ formation of a uniform ZHS-based solid electrolyte interphase on Zn anodes.Moreover,cationic NH^(4+)can preferentially adsorb on the Zn anode surface to shield the“tip effect”and homogenize the electric field.Benefitting from this comprehensive protection,dendrite-free Zn deposition and highly reversible Zn plating/stripping behaviors were realized.Besides,improved electrochemical performances can also be achieved in Zn//MnO_(2)full cells by taking the advantages of this triple-functional additive.This work provides a new strategy for stabilizing Zn anodes from a comprehensive perspective.
基金supported by the National Natural Science Foundation of China(Nos.52074086,51974073,52074072,52074074)the Fundamental Research Funds for the Central Universities,China(No.N2225039)the Liaoning Provincial Natural Science Foundation of China(No.2019-MS-132)。
文摘Combustion performance of pulverized coal(PC)in blast furnace(BF)process is regarded as a criteria parameter to assess the prop-er injection dosage of PC.In this paper,effects of two kinds of additives,Fe_(2)O_(3) and CaO,on PC combustion were studied using the thermo-gravimetric method.The results demonstrate that both the Fe_(2)O_(3) and CaO can promote combustion performance index of PC including igni-tion index(C_(i)),burnout index(D_(b)),as well as comprehensive combustibility index(S_(n)).The S_(n) increases from 1.37×10^(−6) to 2.16×10^(−6)%2·min^(−2)·℃^(−3) as the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%.Additionally,the combustion kinetics of PC was clarified using the Coats-Redfern method.The results show that the activation energy(E)of PC combustion decreases after adding the above additives.For instance,the E decreases from 56.54 to 35.75 kJ/mol when the Fe_(2)O_(3) proportion increases from 0 to 5.0wt%,which supports the improved combustion per-formance.Moreover,it is uneconomic to utilize pure Fe_(2)O_(3) and CaO in production.Based on economy analysis,we selected the iron-bearing dust(IBD)which contains much Fe_(2)O_(3) and CaO component to investigate,and got the same effects.Therefore,the IBD is a potential option for catalytic PC combustion in BF process.
基金supported by the Key Research and Development Program of Yunnan Province(202103A A080019)S&T Program of Hebei(22344402D)+4 种基金National Key Research and Development Program(2021YFB2400300)National Natural Science Foundation of China(22108149)China Postdoctoral Science Foundation(2021M700404)Scientific and Technological Key Project of Shanxi Province(20191102003)Beijing Institute of Technology Research Fund Program for Young Scholars.
文摘The stability of lithium metal anodes essentially dictates the lifespan of high-energy-density lithium metal batteries.Lithium nitrate(LiNO_(3))is widely recognized as an effective additive to stabilize lithium metal anodes by forming LiN_(x)O_(y)-containing solid electrolyte interphase(SEI).However,its poor solubility in electrolytes,especially ester electrolytes,hinders its applications in lithium metal batteries.Herein,an organic nitrate,isosorbide nitrate(ISDN),is proposed to replace LiNO_(3).ISDNhas a high solubility of 3.3M in ester electrolytes due to the introduction of organic segments in the molecule.The decomposition of ISDN generates LiN_(x)O_(y)-rich SEI,enabling uniform lithium deposition.The lifespan of lithium metal batteries with ISDN significantly increases from 80 to 155 cycles under demanding conditions.Furthermore,a lithium metal pouch cell of 439Whkg^(−1) delivers 50 cycles.This work opens a new avenue to develop additives by molecular modifications for practical lithium metal batteries.
基金carried out with the support of“Cooperative Research Program for Agriculture Science&Technology Development(Project No.PJ01622001)”Rural Development Administration,Korea。
文摘Background:This study was conducted to investigate the effects of each phytogenic feed additive(PFA;PFA1,bitter citrus extract;PFA2,a microencapsulated blend of thymol and carvacrol;PFA3,a mixture of bitter citrus extract,thymol,and carvacrol;PFA4,a premixture of grape seed,grape marc extract,green tea,and hops;PFA5,fenugreek seed powder)on the growth performance,nutrient digestibility,intestinal morphology,and immune response in weaned pigs infected with Escherichia coli(E.coli).Results:A total of 634-week-old weaned pigs were placed in individual metabolic cages and assigned to seven treatment groups.The seven treatments were as follows:1)NC;basal diet without E.coli challenge,2)PC;basal diet with E.coli challenge,3)T1;PC+0.04%PFA1,4)T2;PC+0.01%PFA2,5)T3;PC+0.10%PFA3,6)T4;PC+0.04%PFA4,7)T5;PC+0.10%PFA5.The experiments lasted in 21 d,including 7 d before and 14 d after the first E.coli challenge.In the E.coli challenge treatments,all pigs were orally inoculated by dividing a total of 10 mL of E.coli F18 for 3 consecutive days.The PFA-added groups significantly increased(P<0.05)average daily gain and feed efficiency and decreased(P<0.05)the fecal score at d 0 to 14 post-inoculation(PI).Tumor necrosis factorαwas significantly lower(P<0.05)in the PFA-added groups except for T1 in d 14 PI compared to the PC treatment.The T3 had a higher(P<0.05)immunoglobulin G and immunoglobulin A concentration compared to the PC treatment at d 7 PI.Also,T3 showed significantly higher(P<0.05)villus height:crypt depth and claudin 1 expression in ileal mucosa,and significantly downregulated(P<0.05)the expression of calprotectin compared to the PC treatment.Conclusions:Supplementation of PFA in weaned pigs challenged with E.coli alleviated the negative effects of E.coli and improved growth performance.Among them,the mixed additive of bitter citrus extract,thymol,and carvacrol showed the most effective results,improving immune response,intestinal morphology,and expression of tight junctions.
基金the National Natural Science Foundation of China(61935017,62175268,21674123,31700507)Fujian Natural Science Foundation for Distinguished Young Scholars(2020J06039)+4 种基金Project of“100 People Planning in Fujian Province,”Fujian Provincial Department of Finance for the research of organic photovoltaic solar cell(Kle20001A)the Science and Technology Development Fund,Macao SAR(File no.FDCT-0044/2020/A1,0082/2021/A2)UM's research fund(File no.MYRG2020-00151-IAPME)Natural Science Foundation of Guangdong Province,China(2019A1515012186)Shenzhen-Hong Kong-Macao Science and Technology Innovation Project(Category C)(SGDX2020110309360100).
文摘Perovskite solar cells(PSCs)have been demonstrated to be one of the most promising technologies in the field of renewable energy.However,the presence of the defects in the perovskite films greatly limits the efficiency and the stability of the PSCs.The additive engineering is one of the most effective approaches to overcome this problem.Most of the successful additives are extracted from the petroleum-based materials,while the research on the biomass-based additives is still lagging behind.In this paper,two ecofriendly hydroxyalkyl cellulose additives,i.e.,hydroxyethyl cellulose(HEC)and hydroxylpropyl cellulose(HPC),are investigated on the performance of the MAPbl_(3)-based inverted PSCs.Due to the strong interaction between the hydroxyl groups of the cellulose and the divalent cations of the perovskite,these additives enhance the crystal grain orientation and significantly repair the defects of the perovskite films.Working as the additives,these two cellulose derivatives show a strong passivation ability,which significantly reduces the trap density and improves the optoelectronic feature of the PSCs.Compared with the average power conversion efficiency(PCE)of the control device(19.19%),an enhancement of~10%is achieved after the addition of HEC.The optimized device(PCE=21.25%)with a long-term stability(10:80 h,PCE=20.93%)is achieved by the incorporation of the HEC additives into the precursor solution.It is the best performance among the PSCs with the cellulose additives up to now.This research provides a novel choice to develop a cost-effective and renewable additive for the PSCs with high efficiency and excellent long-term stability.
基金supported by the National Natural Science Foundation of China(No.21972049)。
文摘B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)to facilitate the rapid Li+migration.Nevertheless,its wide-temperature application has been limited by the instability of B-derived CEI layer at high temperature.Herein,dual electrolyte additives,consisting of lithium tetraborate(Li_(2)TB)and 2,4-difluorobiphenyl(FBP),are proposed to boost the widetemperature performances of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)cathode.Theoretical calculation and electrochemical performances analyses indicate that Li_(2)TB and FBP undergo successive decomposition to form a unique dual-layer CEI.FBP acts as a synergistic filming additive to Li_(2)TB,enhancing the hightemperature performance of NCM cathode while preserving the excellent low-temperature cycle stability and the superior rate capability conferred by Li_(2)TB additive.Therefore,the capacity retention of NCM‖Li cells using optimal FBP-Li_(2)TB dual electrolyte additives increases to 100%after 200 cycles at-10℃,99%after 200 cycles at 25℃,and 83%after 100 cycles at 55℃,respectively,much superior to that of base electrolyte(63%/69%/45%).More surprisingly,galvanostatic c ha rge/discharge experiments at different temperatures reveal that NCM‖Li cells using FBP-Li_(2)TB additives can operate at temperatures ranging from-40℃to 60℃.This synergistic interphase modification utilizing dual electrolyte additives to construct a unique dual-layer CEI adaptive to a wide temperature range,provides valuable insights to the practical applications of NCM cathodes for all-climate batteries.
